Artigos de revistas sobre o tema "Certification de durabilité"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Certification de durabilité".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.
Piketty, Marie-Gabrielle, Maria-Célia Martins De Souza e Isabel Garcia Drigo. "Certification environnementale et durabilité au Brésil". Économie rurale, n.º 303-304-305 (1 de junho de 2008): 169–83. http://dx.doi.org/10.4000/economierurale.674.
Texto completo da fonteDI ROBERTO, Hadrien, Carolina MILHORANCE, Ndèye SOKHNA DIENG e Elsa SANIAL. "L’agroforesterie en contexte post-forestier : perspectives et controverses d’une mise à l’agenda politique en Côte d’Ivoire". BOIS & FORETS DES TROPIQUES 356 (4 de setembro de 2023): 81–91. http://dx.doi.org/10.19182/bft2023.356.a37121.
Texto completo da fonteRuf, François. "Les standards dits durables appauvrissent-ils les planteurs de cacao ? Interactions entre déforestation en Côte d’Ivoire et au Libéria, crédit à l’achat d’engrais et baisse des cours". Cahiers Agricultures 30 (2021): 38. http://dx.doi.org/10.1051/cagri/2021024.
Texto completo da fonteVEISSIER, I., R. BOTREAU e P. PERNY. "Évaluation multicritère appliquée au bien-être des animaux en ferme ou à l’abattoir : difficultés et solutions du projet Welfare Quality®". INRAE Productions Animales 23, n.º 3 (14 de setembro de 2010): 269–84. http://dx.doi.org/10.20870/productions-animales.2010.23.3.3308.
Texto completo da fonteMolent, L., e R. Singh. "Using the lead crack framework to reduce durability test duration". Aeronautical Journal 124, n.º 1276 (24 de setembro de 2019): 814–20. http://dx.doi.org/10.1017/aer.2019.73.
Texto completo da fonteJones, Rhys, Daren Peng, John G. Michopoulos e Anthony J. Kinloch. "Requirements and Variability Affecting the Durability of Bonded Joints". Materials 13, n.º 6 (23 de março de 2020): 1468. http://dx.doi.org/10.3390/ma13061468.
Texto completo da fonteChowdhury, Nabil, Wing Kong Chiu e John Wang. "A Review of Damage Tolerant Design, Certification and Repair in Metals Compared to Composite Materials". Advanced Materials Research 891-892 (março de 2014): 1597–602. http://dx.doi.org/10.4028/www.scientific.net/amr.891-892.1597.
Texto completo da fonteAbdi, F., Y. Xue, M. Garg, B. Farahmand, J. Housner e K. Nikbin. "An analysis approach toward FAA certification for damage tolerance of aircraft components". Aeronautical Journal 118, n.º 1200 (fevereiro de 2014): 181–96. http://dx.doi.org/10.1017/s0001924000009064.
Texto completo da fontePeng, Daren, Rhys Jones, Andrew S. M. Ang, Victor Champagne, Aaron Birt e Alex Michelson. "A Numerical Study into the Effect of Machining on the Interaction between Surface Roughness and Surface Breaking Defects on the Durability of WAAM Ti-6Al-4V Parts". Metals 12, n.º 7 (29 de junho de 2022): 1121. http://dx.doi.org/10.3390/met12071121.
Texto completo da fontePeng, Daren, Victor K. Champagne, Andrew S. M. Ang, Aaron Birt, Alex Michelson, Sam Pinches e Rhys Jones. "Computing the Durability of WAAM 18Ni-250 Maraging Steel Specimens with Surface Breaking Porosity". Crystals 13, n.º 3 (3 de março de 2023): 443. http://dx.doi.org/10.3390/cryst13030443.
Texto completo da fonteKundu, Sudip, Rhys Jones, Daren Peng, Neil Matthews, Alankar Alankar, Singh R. K. Raman e Pu Huang. "Review of Requirements for the Durability and Damage Tolerance Certification of Additively Manufactured Aircraft Structural Parts and AM Repairs". Materials 13, n.º 6 (15 de março de 2020): 1341. http://dx.doi.org/10.3390/ma13061341.
Texto completo da fonteZbrowski, Andrzej, e Krzysztof Matecki. "Test Stand for Durability Tests of Rotating Elements of Office Chairs". Solid State Phenomena 223 (novembro de 2014): 155–62. http://dx.doi.org/10.4028/www.scientific.net/ssp.223.155.
Texto completo da fonteHostev, Yuriy, Lev Rumiantsev e Tetyana Kostrulova. "QUALITY CONTROL OF HORIZONTAL ROAD MARKING APPLICATION DURING CERTIFICATION OF MARKING MACHINES". Avtoshliakhovyk Ukrayiny, n.º 3 (259) ’ 2019 (17 de outubro de 2019): 24–29. http://dx.doi.org/10.33868/0365-8392-2019-3-259-24-29.
Texto completo da fonteMamun, Muhammad Ziaulhaq, e Sazidur Rahman Talukder. "University Students’ Perception of Quality: A Case of Bangladesh". International Journal of Research and Innovation in Social Science VIII, IIIs (2024): 161–81. http://dx.doi.org/10.47772/ijriss.2024.803011s.
Texto completo da fontePodstawka, Michal, Vladimír Snop, Petr Bělský e Kristýna Kutiová. "Non-destructive Inspection of Composite Aileron during Fatigue Test". MATEC Web of Conferences 349 (2021): 03016. http://dx.doi.org/10.1051/matecconf/202134903016.
Texto completo da fonteJones, Rhys, Calvin Rans, Athanasios P. Iliopoulos, John G. Michopoulos, Nam Phan e Daren Peng. "Modelling the Variability and the Anisotropic Behaviour of Crack Growth in SLM Ti-6Al-4V". Materials 14, n.º 6 (13 de março de 2021): 1400. http://dx.doi.org/10.3390/ma14061400.
Texto completo da fonteORIFICI, ADRIAN C., RODNEY S. THOMSON, RICHARD DEGENHARDT, CHIARA BISAGNI e JAVID BAYANDOR. "AN ANALYSIS TOOL FOR DESIGN AND CERTIFICATION OF POSTBUCKLING COMPOSITE AEROSPACE STRUCTURES". International Journal of Structural Stability and Dynamics 10, n.º 04 (outubro de 2010): 669–81. http://dx.doi.org/10.1142/s0219455410003671.
Texto completo da fonteBodnar, Larysa, Serhii Zavhorodnii, Serhii Stepanov e Vitalii Yastrubinetskyi. "ANALYSIS OF DURABILITY OF REINFORCED CONCRETE STRUCTURES OF BRIDGES ACCORDING TO THEIR TYPICAL DESIGNS". Avtoshliakhovyk Ukrayiny 264, n.º 4 (21 de dezembro de 2020): 58–63. http://dx.doi.org/10.33868/0365-8392-2020-4-264-58-63.
Texto completo da fonteStrang, Marcus, Paola Leardini, Arianna Brambilla e Eugenia Gasparri. "Mass Timber Envelopes in Passivhaus Buildings: Designing for Moisture Safety in Hot and Humid Australian Climates". Buildings 11, n.º 10 (14 de outubro de 2021): 478. http://dx.doi.org/10.3390/buildings11100478.
Texto completo da fonteChowdhury, Nabil, Wing Kong Chiu e John Wang. "Review on the Fatigue of Composite Hybrid Joints Used in Aircraft Structures". Advanced Materials Research 891-892 (março de 2014): 1591–96. http://dx.doi.org/10.4028/www.scientific.net/amr.891-892.1591.
Texto completo da fonteMoroney, Patrick D., e Amrit Shankar Verma. "Durability and Damage Tolerance Analysis Approaches for Wind Turbine Blade Trailing Edge Life Prediction: A Technical Review". Energies 16, n.º 24 (6 de dezembro de 2023): 7934. http://dx.doi.org/10.3390/en16247934.
Texto completo da fonteLappo, I., Y. Dobryshkin, M. Herashchenko e О. Chervotoka. "PERSPECTIVE WAYS OF DEVELOPMENT OF THE LABORATORY TESTING FACILITIES OF THE ARMED FORCES OF UKRAINE". Наукові праці Державного науково-дослідного інституту випробувань і сертифікації озброєння та військової техніки, n.º 3 (28 de maio de 2020): 67–76. http://dx.doi.org/10.37701/dndivsovt.3.2020.09.
Texto completo da fonteBuson, Márcio, Humberto Varum e Marco Antônio Rezende. "First Impressions on Three-Dimensional Printing with Earth-Based Mortar at the Faculty of Engineering of the University of Porto". Buildings 14, n.º 2 (23 de janeiro de 2024): 312. http://dx.doi.org/10.3390/buildings14020312.
Texto completo da fonteJones, Rhys, Ramesh Chandwani, Chris Timbrell, Anthony J. Kinloch e Daren Peng. "Thoughts on the Importance of Similitude and Multi-Axial Loads When Assessing the Durability and Damage Tolerance of Adhesively-Bonded Doublers and Repairs". Aerospace 10, n.º 11 (7 de novembro de 2023): 946. http://dx.doi.org/10.3390/aerospace10110946.
Texto completo da fonteLaeli Fadloli, Hadi Susilo Arifin e Wonny Ahmad Ridwan. "Study on green concrete (porous concrete) sustainability in order to support the sustainable construction in Indonesia". Jurnal Pengelolaan Sumberdaya Alam dan Lingkungan (Journal of Natural Resources and Environmental Management) 13, n.º 3 (20 de setembro de 2023): 432–43. http://dx.doi.org/10.29244/jpsl.13.3.432-443.
Texto completo da fonteChiu, W. K., R. Jones e M. Chao. "A Visco-Plastic Analysis of Bonded Joints under Complex Loading". Engineering Plastics 6, n.º 1 (janeiro de 1998): 147823919800600. http://dx.doi.org/10.1177/147823919800600103.
Texto completo da fonteChiu, W. K., R. Jones e M. Chao. "A Visco-Plastic Analysis of Bonded Joints under Complex Loading". Polymers and Polymer Composites 6, n.º 1 (janeiro de 1998): 15–24. http://dx.doi.org/10.1177/096739119800600103.
Texto completo da fontePellizzon, Nayara Donelli, Alan Ricardo da Silva e Gustavo Garcia Otto. "Method for Setting Weight Tolerance Limits in High-Speed Weigh-in-Motion Systems: A Case Study in Brazil". Sustainability 14, n.º 12 (8 de junho de 2022): 7039. http://dx.doi.org/10.3390/su14127039.
Texto completo da fontePriddy, Lucy P., e Timothy W. Rushing. "Development of Laboratory Testing Protocol for Rapid-Setting Cementitious Material for Airfield Pavement Repairs". Transportation Research Record: Journal of the Transportation Research Board 2290, n.º 1 (janeiro de 2012): 89–98. http://dx.doi.org/10.3141/2290-12.
Texto completo da fonteGÖK, Abdülkerim. "Investigation of the Turkey’s Climate for Service Lifetime of Photovoltaic Modules: A Mapping Approach". Gazi University Journal of Science Part A: Engineering and Innovation 10, n.º 4 (31 de dezembro de 2023): 524–41. http://dx.doi.org/10.54287/gujsa.1357247.
Texto completo da fonteBroomfield, R. W., D. A. Ford, J. K. Bhangu, M. C. Thomas, D. J. Frasier, P. S. Burkholder, K. Harris, G. L. Erickson e J. B. Wahl. "Development and Turbine Engine Performance of Three Advanced Rhenium Containing Superalloys for Single Crystal and Directionally Solidified Blades and Vanes". Journal of Engineering for Gas Turbines and Power 120, n.º 3 (1 de julho de 1998): 595–608. http://dx.doi.org/10.1115/1.2818188.
Texto completo da fonteWinfield, Emily C., Robin J. Rader, Alexander M. Zhivov, Anders Dyrelund, Craig Fredeen, Oddgeir Gudmundsson e Brent Goering. "HVAC Best Practices in Arctic Climates". E3S Web of Conferences 246 (2021): 08004. http://dx.doi.org/10.1051/e3sconf/202124608004.
Texto completo da fonteBanerjee, Sanjoy. "(Invited, Digital Presentation) Zinc-Based Energy Storage System Deployments and Developments for Transition to a Clean Energy Future". ECS Meeting Abstracts MA2022-01, n.º 3 (7 de julho de 2022): 455. http://dx.doi.org/10.1149/ma2022-013455mtgabs.
Texto completo da fonteGrygorcewicz, Paweł. "Results from Laboratory Tests of New Electric Brake Prototype". Journal of KONES 26, n.º 3 (1 de setembro de 2019): 47–52. http://dx.doi.org/10.2478/kones-2019-0056.
Texto completo da fonteMolent, Lorrie. "Managing Fatigue from Corrosion Pits in Aircraft Structures". Advanced Materials Research 891-892 (março de 2014): 261–66. http://dx.doi.org/10.4028/www.scientific.net/amr.891-892.261.
Texto completo da fonteBedon, Chiara, Filipe A. Santos e Marco Fasan. "Mechanical Analysis of the Quasi-Static and Dynamic Composite Action in PV Modules with Viscoelastic Encapsulant". Materials 17, n.º 6 (13 de março de 2024): 1317. http://dx.doi.org/10.3390/ma17061317.
Texto completo da fonteM. Shaju, Pragash. "Bio-based lightweight building blocks: A review". i-manager's Journal on Structural Engineering 11, n.º 4 (2023): 40. http://dx.doi.org/10.26634/jste.11.4.19806.
Texto completo da fonteBarreto, M. F. F. Menna, A. P. Maran, D. C. C. Dal Molin e J. R. Masuero. "Performance evaluation of plastic spacers: proposal and development of evaluation methods". Revista IBRACON de Estruturas e Materiais 9, n.º 6 (dezembro de 2016): 911–52. http://dx.doi.org/10.1590/s1983-41952016000600006.
Texto completo da fonteRanger, Bryan J., Elizabeth Bradburn, Qingchao Chen, Micah Kim, J. Alison Noble e Aris T. Papageorghiou. "Portable ultrasound devices for obstetric care in resource-constrained environments: mapping the landscape". Gates Open Research 7 (6 de dezembro de 2023): 133. http://dx.doi.org/10.12688/gatesopenres.15088.1.
Texto completo da fonteYasev, A. H. "Experimental modeling mechanical qualities of heatcover screens". System technologies 4, n.º 141 (28 de março de 2022): 169–79. http://dx.doi.org/10.34185/1562-9945-4-141-2022-14.
Texto completo da fonteKim, Jae-Hyang, e Seung-Hoon Han. "Indoor Daylight Performances of Optimized Transmittances with Electrochromic-Applied Kinetic Louvers". Buildings 12, n.º 3 (24 de fevereiro de 2022): 263. http://dx.doi.org/10.3390/buildings12030263.
Texto completo da fonteSilva, C., T. Sousa, J. Bessa, F. Cunha, M. Costa, A. Roças e R. Fangueiro. "BEHAVIOUR ASSESSMENT OF TRIDIMENSIONAL MULTILAYER FIBROUS STRUCTURES AS RESPIRATORY PROTECTION SUBSTRATES". TEXTEH Proceedings 2021 (22 de outubro de 2021): 50–57. http://dx.doi.org/10.35530/tt.2021.39.
Texto completo da fonteMaury-Ramírez, Aníbal, e Nele De Belie. "Environmental and Economic Assessment of Eco-Concrete for Residential Buildings: A Case Study of Santiago de Cali (Colombia)". Sustainability 15, n.º 15 (6 de agosto de 2023): 12032. http://dx.doi.org/10.3390/su151512032.
Texto completo da fonteYeremenko, V. S., e M. B. Osintseva. "Utilization of machine and their elements is actual science and practical task". System technologies 4, n.º 141 (28 de março de 2022): 3–13. http://dx.doi.org/10.34185/1562-9945-4-141-2022-01.
Texto completo da fontede las Heras, Ricardo Ballestar, Sergio Fernández Ayala, Estefanía Molina Salazar, Fernando Carrillo, Javier Cañavate e Xavier Colom. "Circular Economy Insights on the Suitability of New Tri-Layer Compostable Packaging Films after Degradation in Storage Conditions". Polymers 15, n.º 20 (19 de outubro de 2023): 4154. http://dx.doi.org/10.3390/polym15204154.
Texto completo da fonteKumar, Ravinder, Priyanka Kaundal, Rahul Kumar Tiwari, Milan Kumar Lal, Hema Kumari, Rakesh Kumar, Kailash Chandra Naga et al. "Development of Reverse Transcription Recombinase Polymerase Amplification (RT-RPA): A Methodology for Quick Diagnosis of Potato Leafroll Viral Disease in Potato". International Journal of Molecular Sciences 24, n.º 3 (28 de janeiro de 2023): 2511. http://dx.doi.org/10.3390/ijms24032511.
Texto completo da fonteOliynyk, Olena, e Mariia Tokar. "Principles of sustainable development in family leisure centers". Current problems of architecture and urban planning, n.º 65 (17 de março de 2023): 236–50. http://dx.doi.org/10.32347/2077-3455.2023.65.236-250.
Texto completo da fonteBürger, Stefan, Carsten Cremers e Niels Urban. "Design and Construction of a LT-PEM Fuel Cell System for Aviation Application". ECS Meeting Abstracts MA2023-02, n.º 38 (22 de dezembro de 2023): 1857. http://dx.doi.org/10.1149/ma2023-02381857mtgabs.
Texto completo da fonteNuraini, Ani, Nurminingsih Nurminingsih e Yeny Sulistyowati. "Pendampingan Rebranding Kemasan Produk Sayuran Segar (Keran Payung Bambu) Kelompok Wanita di RPTRA Payung Tunas Teratai dan Bambu Petung". Jurnal Pelayanan dan Pengabdian Masyarakat (Pamas) 7, n.º 4 (31 de outubro de 2023): 388–98. http://dx.doi.org/10.52643/pamas.v7i4.3530.
Texto completo da fonteFord, D. A., K. P. L. Fullagar, H. K. Bhangu, M. C. Thomas, P. S. Burkholder, P. S. Korinko, K. Harris e J. B. Wahl. "Improved Performance Rhenium Containing Single Crystal Alloy Turbine Blades Utilizing PPM Levels of the Highly Reactive Elements Lanthanum and Yttrium". Journal of Engineering for Gas Turbines and Power 121, n.º 1 (1 de janeiro de 1999): 138–43. http://dx.doi.org/10.1115/1.2816301.
Texto completo da fonte