Literatura científica selecionada sobre o tema "Catalyst warm-up"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Catalyst warm-up".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Catalyst warm-up"
Umehara, K. "HC reduction system for cold start and warm-up phases — Improvement of catalyst warm-up by retarded ignition". JSAE Review 18, n.º 1 (janeiro de 1997): 67–68. http://dx.doi.org/10.1016/s0389-4304(96)00056-2.
Texto completo da fonteKhalilikhah, O., e M. Shalchian. "Modelling and Fuzzy-Threshold Control of SI Engine for Emission Reduction during Cold Start Phase". International Journal of Automotive and Mechanical Engineering 16, n.º 4 (30 de dezembro de 2019): 7225–42. http://dx.doi.org/10.15282/ijame.16.4.2019.05.0539.
Texto completo da fonteBenjamin, S. F., e C. A. Roberts. "Automotive catalyst warm-up to light-off by pulsating engine exhaust". International Journal of Engine Research 5, n.º 2 (abril de 2004): 125–47. http://dx.doi.org/10.1243/146808704773564541.
Texto completo da fonteBenjamin, S. F., e C. A. Roberts. "Warm up of automotive catalyst substrates: Comparison of measurements with predictions". International Communications in Heat and Mass Transfer 25, n.º 1 (janeiro de 1998): 19–32. http://dx.doi.org/10.1016/s0735-1933(97)00134-6.
Texto completo da fonteJeong, S.-J., e W.-S. Kim. "A new strategy for improving the warm-up performance of a light-off auto-catalyst for reducing cold-start emissions". Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 215, n.º 11 (1 de novembro de 2001): 1179–96. http://dx.doi.org/10.1243/0954407011528725.
Texto completo da fonteBenjamin, S. F., e C. A. Roberts. "Catalyst warm-up to light-off by pulsating engine exhaust: Two-dimensional studies". International Journal of Engine Research 5, n.º 3 (junho de 2004): 257–80. http://dx.doi.org/10.1243/1468087041549607.
Texto completo da fonteBenjamin, S. F., e C. A. Roberts. "Modelling warm-up of an automotive catalyst substrate using the equivalent continuum approach". International Journal of Vehicle Design 22, n.º 3/4 (1999): 253. http://dx.doi.org/10.1504/ijvd.1999.001868.
Texto completo da fonteJungKim, Chan, Sank Wook-Han, Ki Hyun Kim, Moo Yeon Lee e Gee Soo Lee. "Effects of the exhaust gas heat recovery system with a plate heat exchanger on the warm-up performance characteristics of the gasoline engine". International Journal of Engineering & Technology 7, n.º 2.12 (3 de abril de 2018): 136. http://dx.doi.org/10.14419/ijet.v7i2.12.11110.
Texto completo da fonteBenjamin, S. F., e C. A. Roberts. "Warm up of an automotive catalyst substrate by pulsating flow: a single channel modelling approach". International Journal of Heat and Fluid Flow 21, n.º 6 (dezembro de 2000): 717–26. http://dx.doi.org/10.1016/s0142-727x(00)00025-4.
Texto completo da fonteMerkisz, Jerzy, Jacek Pielecha e Monika Andrych-Zalewska. "Influence of the Length of a Catalyst-Coated Glow Plug on Exhaust Emissions". Energies 13, n.º 24 (11 de dezembro de 2020): 6557. http://dx.doi.org/10.3390/en13246557.
Texto completo da fonteTeses / dissertações sobre o assunto "Catalyst warm-up"
Hambarek, Djamel Eddine. "Développement d'une méthodologie d'essais dynamiques appliquée à la mise au point moteur". Electronic Thesis or Diss., Ecole centrale de Nantes, 2023. http://www.theses.fr/2023ECDN0035.
Texto completo da fonteThe work of this thesis responds to the context of the evolution of engine depollution norms together with the increase of the clientrequirements. It proposes a complete methodology of engine calibration considering dynamic effects with the aim of an efficient control in terms of emissions and performances. The method is divided into four steps: the dynamic design of experiments generating a set of RDE (Real Driving Emissions) cycles and dynamic variations of engine parameters using low discrepancy sequences: test results are used to train a dynamical model using LSTM neural network to predict output dynamic variations(CO, HC, NOx, Exhaust flow and temperature). The trained model is used in an optimization loop to calibrate the engine parameters using a genetic algorithm. The catalyst warm-up phase is the chosen phase for the development of the method. It is the phase occuring from engine start until the catalyst is the most efficient. It is indeed the phase with the most important emissions which is coherent with the aim of the engine calibration. The results showed noticeable improvements of CO, HC and Nox reduction compared to the steady state (baseline) method
Cedeño, Alejandro. "Sintering of a Pt/Al₂O₃ automotive exhaust oxidation catalyst effect on converter "warm-up" performance /". 1989. http://catalog.hathitrust.org/api/volumes/oclc/20051839.html.
Texto completo da fonteTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 183-192).
Trabalhos de conferências sobre o assunto "Catalyst warm-up"
Ball, Douglas J. "Distribution of Warm-Up and Underfloor Catalyst Volumes". In International Fuels & Lubricants Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1992. http://dx.doi.org/10.4271/922338.
Texto completo da fonteLepreux, Olivier, Yann Creff e Nicolas Petit. "Warm-up strategy for a Diesel Oxidation Catalyst". In 2009 European Control Conference (ECC). IEEE, 2009. http://dx.doi.org/10.23919/ecc.2009.7074995.
Texto completo da fonteCedrone, Kevin, e Wai K. Cheng. "Using Valve Timing and Exhaust Back Pressure to Improve Catalyst Warm-Up Time". In SAE/KSAE 2013 International Powertrains, Fuels & Lubricants Meeting. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2013. http://dx.doi.org/10.4271/2013-01-2656.
Texto completo da fonteBall, Douglas J. "A Warm-Up - Underfloor Converter Parametric Study: Effects of Catalyst Technology on Emission Performance". In 1996 SAE International Fall Fuels and Lubricants Meeting and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1996. http://dx.doi.org/10.4271/961905.
Texto completo da fonteSalehi, Rasoul, e Anna G. Stefanopoulou. "Optimal Exhaust Valve Opening Control for Fast Aftertreatment Warm Up in Diesel Engines". In ASME 2018 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/dscc2018-9178.
Texto completo da fonteJeong, Soo-Jin, e Woo-Seung Kim. "Three-Dimensional Numerical Study on the Use of Warm-up Catalyst to Improve Light-Off Performance". In SAE 2000 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-0207.
Texto completo da fonteKarkanis, Anastasios N., Pantelis N. Botsaris e Panagiotis D. Sparis. "A Catalyst Surface Control Automation System for Emission Reduction During Cold Start". In ASME 2004 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/icef2004-0865.
Texto completo da fonteRavikumar, Avinash, Ankur Bhatt, Brian Gainey e Benjamin Lawler. "GT-Suite Modeling of Thermal Barrier Coatings in a Multi-Cylinder Turbocharged DISI Engine for Catalyst Light-Off Delay Improvement". In Energy & Propulsion Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2023. http://dx.doi.org/10.4271/2023-01-1602.
Texto completo da fonteSanketi, Pannag R., J. Karl Hedrick e Tomoyuki Kaga. "A Simplified Catalytic Converter Model for Automotive Coldstart Control Applications". In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80696.
Texto completo da fonteHAMBAREK, Djamel Eddine, Jean-François PETIOT, Pascal Chesse e Eric WATEL. "Towards a Complete Engine Calibration Methodology: Dynamic Design of Experiments (DDoE), Application to Catalyst Warm-Up Phase". In 15th International Conference on Engines & Vehicles. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2021. http://dx.doi.org/10.4271/2021-24-0028.
Texto completo da fonte