Bibliografias temáticas / Carpet Co

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Carpet Co"

Autor: Grafiati

Publicado: 29 de julho de 2024

Última modificação: 30 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Carpet Co".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Carpet Co"

Sobus, J., B. Pourdeyhimi, B. Xu e Y. Ulcay. "Evaluating Loss of Texture Definition in Carpets Using Mathematical Morphology: Covariance". Textile Research Journal 62, n.º 1 (janeiro de 1992): 26–39. http://dx.doi.org/10.1177/004051759206200105.

Texto completo da fonte

Resumo:

Carpet textures contain periodic information that varies across constructions and is degraded by mechanical wear. We apply image covariance, a digital implementation of mathematical morphology, to binary carpet images for the purpose of measuring aspects of texture periodicity. Our test materials consist of four kinds of double ply wool carpets of differing textures divided into control, light, and heavy wear samples. Video images were digitized by a True Vision Vista frame grabber. Gray-level images were histogram equalized and converted to binary. Covariance data allow one to measure period frequency, amplitude, and overall mean. Results for our carpet samples show changes in amplitude and mean with wear, and are consistent with findings for a previous paper using grey level co-occurrence analysis. Covariance analysis requires relatively minimal computation for processing and preprocessing, but results may be affected by loss of gray level gradient information. If textural features of interest are preserved, this method is an efficient and easily implemented alternative to co-occurrence analysis. Attention is also given to the covariance analysis of computer generated carpet-like textures. We attempt to duplicate the covariance behavior of our carpet series by altering the placement of the component texture objects and simulate carpet wear by degrading regular textures with noise. We offer some thoughts on modeling carpet texture appearance loss with the aid of simulated texture images.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Merenkov, Sergei. "A Sierpiński carpet with the co-Hopfian property". Inventiones mathematicae 180, n.º 2 (21 de janeiro de 2010): 361–88. http://dx.doi.org/10.1007/s00222-010-0231-5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Porro, Samuele, Simone Musso, Mauro Giorcelli e Alberto Tagliaferro. "Thermal CVD Growth of Carbon Nanotubes Thick Layers". Advances in Science and Technology 48 (outubro de 2006): 37–43. http://dx.doi.org/10.4028/www.scientific.net/ast.48.37.

Texto completo da fonte

Resumo:

Since their discovery, carbon nanotubes received a great deal of attention because of unique physical and chemical properties. However, in order to become of interest in the field of super resistant fibers for nanocomposite materials or in the production of textile material, very long carbon nanotubes are needed. Massive samples of well packed, vertically aligned and very long selfstanding multi wall carbon nanotubes (MWNT) were synthesized on uncoated silicon by a very efficient thermal CVD process, which involved the co-evaporation of camphor and ferrocene in a nitrogen atmosphere. We obtained structures with diameter between 20 and 80 nm with an average growth rate of about 400 nm/s, organized in thick carpets of entangled nanotubes. By the weight of the deposited carpet of MWNTs (density circa 0.8 g/cm3) the conversion of about 30% of the total hydrocarbon feedstock was calculated. Morphology and physical properties were characterized by electron microscopy techniques, Micro- Raman spectroscopy and thermogravimetric analysis. The analyses performed showed the absence of secondary carbonaceous products, whereas only 6% in weight of ferromagnetic iron clusters are present. BET analysis was used to calculate the porosity and the specific surface area density of the as grown samples, which resulted approximately 70 m2/g. Hydrophobicity of the CNT carpet was also investigated.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Verma, Rajesh Kumar, Balram Jaiswal, Rahul Vishwakarma, Kuldeep Kumar e Kaushlendra Kumar. "Water absorption study and characterization of polymer composites developed from discarded nylon carpet". IOP Conference Series: Materials Science and Engineering 1228, n.º 1 (1 de março de 2022): 012008. http://dx.doi.org/10.1088/1757-899x/1228/1/012008.

Texto completo da fonte

Resumo:

Abstract The scientific objective of this work is to reuse the polymer materials generated from carpet waste. The nylon obtained from the discarded carpet was used as reinforcement material into the epoxy matrix phase. A modified approach of Vacuum-assisted resin transfer molding (VARTM) was used to infuse the mixture of epoxy and hardener into the nylon carpet polymer composites. This investigates the water absorption behavior of carpet waste composite. It will justify the application of proposed composites for lightweight structural applications in a moisture environment. The nylon fiber-based-epoxy composite was dipped in water as per ASTM standard for a different duration, namely, 24, 48, 72, 144 hours. The findings demonstrate that it can effectively withstand in moisture environment, and a maximum 4.5% weight of samples increased among all the samples for a different duration. Also, the developed composite showed a lower water diffusion co-efficient than the nail head structure and linden wood. Also, the carpet waste composite samples were investigated for thermal degradation and chemical behavior using X-Ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy, respectively. The finding shows that the proposed composite could be used for lightweight components such as dashboard panels, sound absorbers, panel sheets, wall tiles, etc.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lemieux, Paul, Eric Stewart, Matthew Realff e James A. Mulholland. "Emissions study of co-firing waste carpet in a rotary kiln". Journal of Environmental Management 70, n.º 1 (janeiro de 2004): 27–33. http://dx.doi.org/10.1016/j.jenvman.2003.10.002.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

El Bour, Monia, Mohamed Dellali, Imene Boukef, Fatma Lakhal, Radhia Mraouna, Hedia Attia El Hili, Christine Paillard e John Klena. "First assessment of Perkinsosis and brown ring disease co-infection in Ruditapes decussatus in the North Lake of Tunis (southern Mediterranean Sea)". Journal of the Marine Biological Association of the United Kingdom 92, n.º 7 (novembro de 2012): 1579–84. http://dx.doi.org/10.1017/s0025315411001846.

Texto completo da fonte

Resumo:

Carpet shell clam populations on the Tunisian coastline are susceptible to several microbial pathogen challenges. In this study we report the results of five years' surveillance, conducted from January 2004 till June 2009, for detection of Perkinsosis and brown ring disease (BRD). The survey covered three sites of natural populations of Ruditapes decussatus in a Tunisian lagoon, the North Lake of Tunis. Perkinsosis was detected preferentially in winter periods from the external and marine site, BRD was detected more frequently in the summer periods in a more proximal collection site (in the lake) and was positively correlated with concentrations of heterotrophic Vibrio sp. Our results suggest that several factors other than temperature and salinity might explain spatial distribution variability and natural intensities for these infections in carpet shell clam populations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Fishbein, Bette K. "Carpet take-back: EPR American style". Environmental Quality Management 10, n.º 1 (2000): 25–36. http://dx.doi.org/10.1002/1520-6483(200023)10:1<25::aid-tqem4>3.0.co;2-4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kumari, Simpal, e Ram Naraian. "Decolorization of synthetic brilliant green carpet industry dye through fungal co-culture technology". Journal of Environmental Management 180 (setembro de 2016): 172–79. http://dx.doi.org/10.1016/j.jenvman.2016.04.060.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Retnasari, Lisa, e Yayuk Hidayah. "Implementasi Pendidikan Multikultural pada Progam Kurikuler sebagai Sarana Membangun Karakter Bangsa di Sekolah Dasar". JUPIIS: JURNAL PENDIDIKAN ILMU-ILMU SOSIAL 11, n.º 2 (8 de dezembro de 2019): 438. http://dx.doi.org/10.24114/jupiis.v11i2.14465.

Texto completo da fonte

Resumo:

This research aims to explain the implementation process of multicultural education as the media to build the character of the nation through the curricular program in primary school. The method used is the qualitative descriptive. The subject of this research includes the headmaster of the school, educator and the students by using purposive sampling. The instrument to gather information includes observation, documentation, and interview. The knowledge regarding the multicultural education includes respect diversities, understand, and accept diversities, either gender, religion, tribe, ethnic, culture, beliefs, economic ability, social condition, besides that the ability of the students to accept their friends who have academic differences either higher academic ability of lower academic ability, how the students can accept achievements in learning, the condition of the students either ABK that has disabilities or mental illness as an act to build the character of the nation. The multicultural learning program is done through: curriculum based on multicultural, intra-curricular program through morning carpet and day carpet, and co-curricular program (assembly, mini trip, resource person, and multiage).

Estilos ABNT, Harvard, Vancouver, APA, etc.

Yim, Chi Ming, Chi L. Pang, Diego R. Hermoso, Coinneach M. Dover, Christopher A. Muryn, Francesco Maccherozzi, Sarnjeet S. Dhesi, Rubén Pérez e Geoff Thornton. "Influence of support morphology on the bonding of molecules to nanoparticles". Proceedings of the National Academy of Sciences 112, n.º 26 (15 de junho de 2015): 7903–8. http://dx.doi.org/10.1073/pnas.1506939112.

Texto completo da fonte

Resumo:

Supported metal nanoparticles form the basis of heterogeneous catalysts. Above a certain nanoparticle size, it is generally assumed that adsorbates bond in an identical fashion as on a semiinfinite crystal. This assumption has allowed the database on metal single crystals accumulated over the past 40 years to be used to model heterogeneous catalysts. Using a surface science approach to CO adsorption on supported Pd nanoparticles, we show that this assumption may be flawed. Near-edge X-ray absorption fine structure measurements, isolated to one nanoparticle, show that CO bonds upright on the nanoparticle top facets as expected from single-crystal data. However, the CO lateral registry differs from the single crystal. Our calculations indicate that this is caused by the strain on the nanoparticle, induced by carpet growth across the substrate step edges. This strain also weakens the CO–metal bond, which will reduce the energy barrier for catalytic reactions, including CO oxidation.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Carpet Co"

Gonçalves, André da Motta. "Retificação de ultraprecisão de carbeto de tungstênio-cobalto (WC-Co)". Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/18/18146/tde-26072016-100144/.

Texto completo da fonte

Resumo:

Este trabalho apresenta o estudo da Retificação de Ultraprecisão de ligas de carbeto de tungstênio-cobalto (WC-Co) com diferentes microestruturas. A motivação para este estudo foi o grande potencial desta liga para a fabricação de componentes que requerem materiais de alta dureza e resistência à fratura. Devido à combinação dessas características, esses materiais vêm sendo usados na fabricação de moldes para injeção de lentes ópticas de dispositivos eletrônicos e ópticos. Assim, amostras de carbeto de tungstênio-cobalto foram submetidas a vários testes para determinação da correlação entre os parâmetros de corte e parâmetros estruturais (tamanho de grão e teor de cobalto) com o regime de remoção de material. As amostras foram polidas e posteriormente microendentadas com cargas variadas para pré-avaliar a ocorrência de formação de microtrincas. Testes de usinagem foram conduzidos em uma retificadora de ultraprecisão, usando rebolos de diamante e posteriormente a rugosidade e os danos da superfície (microtrincas e crateras) foram avaliados. Para melhor entendimento da influência dos parâmetros estruturais e dos parâmetros de corte sobre os resultados de rugosidade foi realizado um teste ANOVA. As forças de usinagem foram medidas durante os ensaios usando um microdinamômetro piezelétrico com objetivo de estimar a temperatura na zona de retificação. Os resultados obtidos indicam que tanto os parâmetros estruturais como os parâmetros de corte influenciam na rugosidade, microdureza e temperatura na zona de retificação das ligas de carbeto de tungstênio-cobalto. Amostras com maior tamanho de grãos apresentam as menores rugosidades e altas temperaturas na zona de retificação. A velocidade de avanço (Vf) mostrou-se mais influente que a profundidade de corte (ap). Menores velocidades de avanço aumentam a temperatura na zona de retificação e a microdureza na camada superficial. Entretanto, verificou-se que as maiores temperaturas obtidas nos ensaios não foram suficientes para promover alteração metalúrgica no material. Algumas condições de corte combinadas com parâmetros estruturais levam a remoção de material em regime dúctil, resultando em superfícies com qualidade óptica. A porcentagem de cobalto e a velocidade de avanço (Vf) têm forte influência na alteração da microdureza da camada superficial das amostras retificadas. A diminuição da velocidade de avanço tende a aumentar a microdureza na camada. Há aumento de microdureza de até 200 kgf/mm2, sugerindo a ocorrência de encruamento por tensões compressivas. Com base nestes resultados, acredita-se que a retificação de ultraprecisão apresenta-se como uma opção viável para a manufatura de componentes de carbeto de tungstênio com acabamento submicrométrico, possibilitando a eliminação dos processos tradicionais de manufatura óptica, tais como a lapidação e o polimento.
The ultraprecision grinding of different tungsten carbide-cobalt microstructures (WC-Co) were investigated. The motivation for this study is the materials high hardness and potential application for micromolds. These materials have been used as optical inserts in glass injection molding processes for optical and electric devices, due to their excellent combination of high hardness, ductility and fracture toughness. Tungsten carbide samples were subjected to tests to determine the correlation between cutting parameters and microstructures to achieve the ductile regime of material removal. Polished surfaces of carbide samples were indented using varying loads to evaluate the microcracks formation. The machining tests were conducted using an ultraprecision grinding and A V-shaped metal-bond was used. Surface roughness was investigated as functions of the grinding conditions by means Analysis of Variance (ANOVA). The tangential force was measured using a piezoelectric dynamometer to estimate the grinding zone temperature. The results indicate that structural parameters (grain size and cobalt content) and cutting parameters have a significant influence on surface roughness, micro-hardness and grinding zone temperature for tungsten carbide-cobalt alloys.Tungsten carbide-cobalt samples with the larger grain size presented lower surface finish results and high grinding temperatures. The feed rate (Vf) showed greater influence that the in-feed (ap). The grinding zone temperature and the hardness are increased when speed rate is reduced. However, it was found that the highest temperature achieved did not reach a critical temperature for phase transformation. Some cutting parameters combined with structural parameters lead to ductile mode grinding mechanism, and as consequence, high optical quality surfaces are obtained. The micro-hardness of layer is extremely influenced by cobalt content and speed rate. Lower feed rate tends to increase the micro-hardness up to 200 kgf/mm2, suggesting that the compressive stress occurs. Considering the results presented it is believed that the Ultraprecision grinding showed to be a viable option for the fabrication of components made of tungsten carbide-cobalt with nanometer surface finish possibly eliminating traditional optical manufacturing processes such as lapping and polishing.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Burns, Alfred M. "PARENTAL STRESS AS A CO-MORBIDITY OF SEVERE EARLY CHILDHOOD CARIES". The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1241624634.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Huyssteen, S. van. "Bedryfservaring in Kledingprogramme aan die Kaapse Technikon". Thesis, Cape Technikon, 1998. http://hdl.handle.net/20.500.11838/1927.

Texto completo da fonte

Resumo:

Thesis (MTech(Education))--Cape Technikon, Cape Town,1998
This study investigates the industry component of cooperative education programmes in Clothing as offered by the Clothing Department at the Cape Technikon relevant to the Western Cape. The character and nature of co-operative education came under general scrutiny. The structure of any cooperative educational program consists of two components; the academic and the industry component. Within this structure, a few attendance patterns are used to employ students in industry. This employment of students bridges the gap between the academic component and practice. The co-ordinator of co-operative education is responsible for the supervision over and application of specific tasks to ensure the successful completion of the industry component. The professional tasks include the identification and recruiting of workstations, the placement of students, the orientation of both the employer and student, the monitoring of the students' progress, as well as the evaluation of the students' work. The important role of the advisory committee cannot be underestimated in order to ensure successful completion of the co-operative educational programs. It should be properly constituted with specific functions with regards to the industry component. A qualitative study was undertaken to describe the course of the current industry experience in Clothing at the Cape Technikon. Discussion forums, personal interviews and a literature study serve as the foundation of this investigation.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dalidjan, Mulyani. "Caries inhibitory effect of fluoride co-crystallized sucrose : establishing a field trial /". Title page, contents and summary only, 1995. http://web4.library.adelaide.edu.au/theses/09PH/09phd143.pdf.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Hasslöf, Pamela. "Probiotic Lactobacilli in the context of dental caries as a biofilm-mediated disease". Doctoral thesis, Umeå universitet, Institutionen för odontologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-67843.

Texto completo da fonte

Resumo:

Background: The World Health Organization defines probiotics as ‘live microorganisms which, when administered in adequate amounts, confer a health benefit to the host’. Traditionally, probiotic microorganisms have been used to prevent or treat gastrointestinal tract diseases. In the last 15 years, there has been increasing interest of a possible probiotic impact on the oral microbiota and dental caries. Dental caries is a multifactorial disease, and the causative factor in the oral microbiota includes a shift from a balanced microflora to a microflora that includes more aciduric species such as mutans streptococci (MS), non-mutans streptococci, and Actinomyces. MS is considered an opportunistic pathogen although several other bacteria also contribute to the disease. Early acquisition of MS is associated with early development of caries; therefore a desirable complement to other prophylactic measures would be a MS colonization inhibitor. Objective: To better understand how selected strains of probiotic lactobacilli interact with MS in vitro and in vivo and to study the impact of probiotic lactobacilli on caries development during childhood. Material and methods: The in vitro properties of probiotic lactobacilli were studied with regard to (i) acid production from sugars and sugar alcohols, (ii) growth inhibition capacity on clinical isolates and reference strains of MS as well as Candida albicans and (iii) the capacity to co-aggregate with MS. A randomized controlled trial (RCT) tested the short-term effect of intervention with two Lactobacillus reuteri strains on MS, which was evaluated after treatment with chlorhexidine. The re-growth patterns of MS and 19 other selected strains were also evaluated. In the second clinical study we investigated the long-term effect on MS prevalence and dental caries after an intervention with Lactobacillus paracasei ssp. paracasei F19 (LF19) between 4 and 13 months of age. Results: The results from the in vitro testing showed that strains of probiotic lactobacilli differed in their fermentation patterns, inhibition capacity and their capacity to co-aggregate, which should be kept in mind in the translation to clinical research. The clinical study on short-term effects of two L. reuteri strains on MS and other oral strains showed no effect on re-growth patterns after intervention. The clinical study on long-term effects of LF19 showed no effect on the prevalence of MS. Furthermore, the clinical follow-up at 9 years of age showed no differences in either decayed, missing, and filled surface (dmfs) or DMFS between the probiotic and placebo groups. Evaluation of saliva samples showed no signs of oral colonization with LF19 in the study group. Conclusion: The in vitro testing showed potentials of the selected probiotic Lactobacillus strains for interference with MS and C. albicans. The results from the clinical studies showed no such effect on MS or dental caries. Evidence regarding the effectiveness of specific probiotic applications in the prevention of dental caries is limited and does not allow for conclusions concerning the use of probiotic bacteria as a preventive measure.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Thorne, Trina S. "The effect of co-operative education on career decision making of secondary students in Newfoundland". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0017/MQ54912.pdf.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Young, Glenda. "Preparing Students for Professional Work Environments Through University- Industry Partnerships: A Single Case Study of the Co-op Development Program". Diss., Virginia Tech, 2017. http://hdl.handle.net/10919/85414.

Texto completo da fonte

Resumo:

Persistent calls to the field of engineering education to help develop diverse, well-prepared engineers for the STEM workforce have fostered collaborations across university and industry stakeholders. As stakeholders focus efforts on supporting student persistence at several critical junctures, there has been a renewed interest in supporting the school-to-workforce transition for engineering graduates. With calls to develop a more tech-savvy workforce, innovative approaches to supporting and preparing students to enter the workforce have become even more necessary; thus it is important to understand how university- industry partnerships generate experiences that contribute to students' eventual workforce entry. The structure of the Co-op Development Program and the perspective of eight former CDP participants addressed how learning experiences shaped the career decisions of engineering participants immediately following graduation. A qualitative single case study approach was used and Social Cognitive Career Theory (SCCT) guided the study. Major contributions of this study include extending the analytic generalizability of Social Cognitive Career Theory, creating operationalized definitions of learning experiences embedded within that framework, and linking those experiences to how students' beliefs were shaped on their pathway to an early career within engineering industry. The themes identified in this study can help CDP managers and university stakeholders better support co-op participants and potentially allocate resources that will serve as the basis for future co-op design recommendations. Stakeholders may also use findings to promote the role of university and industry partnerships in supporting the student workforce transition. Future researchers may extend the study design across multiple cases and leverage recommendations for qualitative and quantitative investigations to address some of the limitations embedded within this research design and further contribute to the discussion of preparing students for professional work environments through university-industry partnerships. Ultimately, findings of this study give voice to the student partner in university-industry partnerships as themes identified in this study help CDP managers and university stakeholders to establish interventions and serve as the basis for future co-op design recommendations.
Ph. D.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kwong, Koon-lau. "An examination of training practices and its impact on employees's career in Haeco over twenty years /". [Hong Kong : University of Hong Kong], 1985. http://sunzi.lib.hku.hk/hkuto/record.jsp?B12315138.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bajunaid, Mohammed Mohammed. "The effectiveness of co-operative education programmes for developing students' awareness of the importance of generic competencies". Connect to e-thesis, 2008. http://theses.gla.ac.uk/489/.

Texto completo da fonte

Resumo:

Thesis (Ph.D.) - University of Glasgow, 2008.
Ph.D. thesis submitted to the Faculty of Education, Centre for the Support for Learning, University of Glasgow, 2008. Includes bibliographical references. Print version also available.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lawrence, Nelson T. "Career track outcomes for cooperative education students at Kaukauna High School six year follow-up of career choices of mainstream and EEN students enrolled in Technology Education CO-OP Program /". Online version, 1999. http://www.uwstout.edu/lib/thesis/1999/1999lawrencen.pdf.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Carpet Co"

Gordon, Gene D. Shamokin & Mount Carmel Transit Co. West Chester, PA: B. Rohrbeck, Traction Publications, 1994.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bragen, David A. Corporate characters: Understanding the personalities of your co-workers. New York: iUniverse, Inc., 2006.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

William, Bridges. Creating You & Co.: Learn to think like the CEO of your own career. Reading, Mass: Addison-Wesley, 1997.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

William, Bridges. Creating You & Co.: Learn to think like the CEO of your own career. Reading, Mass: Perseus Books, 1997.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

DuBrin, Andrew J. Stand out!: 330 ways for gaining the edge with bosses, co-workers, subordinates, and customers. Englewood Cliffs, N.J: Prentice Hall, 1993.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Grubb, W. Norton. Linking school-based and work-based learning: The implications of Laguardia's co-op seminars for school-to-work programs. Berkeley, CA: National Center for Research in Vocational Education, University of California at Berkeley, 1998.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

McIntosh, Cathy. A bicentennial history of Mt. Carmel Presbyterian Church, Alquippa, Beaver Co., Pa.: Two hundred years of ministry and mission, 1793-1993. Aliquippa, PA: The Church, 1993.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Sherman, Stephanie G. Make yourself memorable: Winning stategies to help you make a great impression on your boss, your co-workers, your customers--and everyone else! New York: AMACOM, 1996.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Clayton, Sherman V., ed. Make yourself memorable: Winning strategies to help you make a great impression on your boss, your co-workers, your customers--and everyone else! New York: AMACOM, 1996.

Encontre o texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Carpet Co"

Hughes, Jane, Gaynor Smith e Trisha Greenhalgh. "Co-Producing Information". In User Involvement in Health Care, 64–80. Oxford, UK: Wiley-Blackwell, 2010. http://dx.doi.org/10.1002/9781444325164.ch5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Abbasi, Adeel, Francis DeRoos, José Artur Paiva, J. M. Pereira, Brian G. Harbrecht, Donald P. Levine, Patricia D. Brown et al. "Cardiac Output (CO)". In Encyclopedia of Intensive Care Medicine, 470. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-00418-6_1301.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Abbasi, Adeel, Francis DeRoos, José Artur Paiva, J. M. Pereira, Brian G. Harbrecht, Donald P. Levine, Patricia D. Brown et al. "CO (Cardiac Output)". In Encyclopedia of Intensive Care Medicine, 569. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-00418-6_1369.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pannu, Neesh, Xiaoyan Wen, John A. Kellum, John Fildes, N. Al-Subaie, Mark Hamilton, Susan M. Lareau et al. "Nexfin CO-Trek". In Encyclopedia of Intensive Care Medicine, 1538. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-00418-6_1951.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Morgan, George. "‘Meaning and Soul’: Co-working, Creative Career and Independent Co-work Spaces". In Pathways into Creative Working Lives, 139–58. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-38246-9_8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Fenton, Angela, Kerryann Walsh e Amy MacDonald. "Capacity Building of Early Career Researchers Through Cross-Institutional Mentoring". In Global Co-Mentoring Networks in Higher Education, 203–27. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-27508-6_12.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Adams, Anne E., Jerine M. Pegg, SueAnn I. Bottoms, H. Smith Risser, Ke Wu e Anne L. Kern. "Storying Our Academic Career Transitions within a Peer-mentoring Community". In Global Co-Mentoring Networks in Higher Education, 73–94. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-27508-6_5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pearce, Vikki, Paula Baraitser, Gaynor Smith e Trisha Greenhalgh. "Experience-Based Co-Design". In User Involvement in Health Care, 28–51. Oxford, UK: Wiley-Blackwell, 2010. http://dx.doi.org/10.1002/9781444325164.ch3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dell, Colleen. "Dogs as Co-Researchers". In Career Paths in Human-Animal Interaction for Social and Behavioral Scientists, 14–16. New York, NY : Routledge, 2021.: Routledge, 2021. http://dx.doi.org/10.4324/9780429347283-6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

von Storch, Hans. "Personal Accounts by Colleagues and Co-workers". In From Decoding Turbulence to Unveiling the Fingerprint of Climate Change, 219–86. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-91716-6_4.

Texto completo da fonte

Resumo:

AbstractDuring his long career, Klaus Hasselmann has been a boss and teacher but also a colleague to many people. Therefore, we have asked quite a few of these people about how they remember their time with him.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Carpet Co"

Landstorfer, Johannes, Ivo Herrmann, Jan-Erik Stange, Marian Dork e Reto Wettach. "Weaving a carpet from log entries: A network security visualization built with co-creation". In 2014 IEEE Conference on Visual Analytics Science and Technology (VAST). IEEE, 2014. http://dx.doi.org/10.1109/vast.2014.7042483.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dezső-Dinnyés, Renáta. "Co-Ability Practices". In Nordes 2019: Who Cares? Nordes, 2019. http://dx.doi.org/10.21606/nordes.2019.003.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gelles, Laura A., e Idalis Villanueva. "Co-constructing Engineering Doctoral Identities Through Career Prospects". In 2020 IEEE Frontiers in Education Conference (FIE). IEEE, 2020. http://dx.doi.org/10.1109/fie44824.2020.9274164.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Małecka-Dobrogowska, Marta. "PROJECT... AND THEN WHAT? PROJECTIFICATION AS AN INSTRUMENT FOR IMPROVING THE CAREER OF MANAGERS OF NON-PROFIT ORGANIZATIONS". In 10th IPMA Research conference: Value co-creation in the project society. International Project Management Association, Serbian Project Management Association, 2022. http://dx.doi.org/10.56889/iidi9061.

Texto completo da fonte

Resumo:

BACKGROUND: Development of civil society occurs in various forms. One form of development is the activity of non-profit organizations, visible in the increase in number of foundations and associations around the world, as well as in Poland. The activities of these organizations in the corporate sector and the public sector are carried out through a sequence of implemented projects. Contemporary management trends penetrate the world of non-profit organizations. This is a result of progressive globalization and unification of management methods, leading to progressive temporalization, professionalization, hybridization, or automation of processes. In particular, the phenomenon of all-encompassing projectification and its identified variations, such as ‘euro-projectification’ (projects based on programs of the European Union institutions) can be observed when projects replace any activity taking place in the organization, in connection with the organization’s employees, or its environment. ASSUMPTIONS/APPROACH: The scientific debate on the phenomenon of projectification concerns the management of enterprises or projects in the public sector. A much smaller, almost negligible percentage of researchers concern themselves with aspects and consequences of projectification in the management of non-profit organizations (NPO). To contribute to the scientific discussion on projectification, the author will present the consequences of this phenomenon on the example of managers of Polish non-profit organizations. The aim of the study was to analyse managers’ experience of the process of projectification and to gain an understanding of how this phenomenon changed the way they manage their non-profit. METHODOLOGY: The data presented in this study concern 204 NPO managers. The results of the study were extracted from a representative survey conducted in Poland on a sample of 385 non-profit organizations. To fully illustrate this phenomenon, the study was supplemented with quantitative data from ten interviews conducted with NPO managers. The aim of the discussions was to collect more general data on the consequences of managing an increasing number of projects.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Stuedahl, Dagny. "Caring for Diversity in Co-Design with Young Immigrants". In Nordes 2019: Who Cares? Nordes, 2019. http://dx.doi.org/10.21606/nordes.2019.029.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Orban, Zsolt, Marius Gocica e Laurentiu Marculescu. "Study of the railway curves geometry under the effect of rail traffic over time". In 7th International Conference on Road and Rail Infrastructure. University of Zagreb Faculty of Civil Engineering, 2022. http://dx.doi.org/10.5592/co/cetra.2022.1459.

Texto completo da fonte

Resumo:

Over time, under the action of moving railway vehicles and temperature variations, the railway track deforms both in alignment and especially in the areas of the curves, the degradation process being self-generating. Given that the rehabilitation works of the Romanian railways are difficult, monitoring the geometry of the track and carrying out the necessary maintenance works in order to restore the geometric elements, respectively improving them for maintain traffic speeds are the main concerns of the Romanian Railway Administration. This paper studies the variation over time (years) of the geometry of some railway curves under the action of railway traffic and highlights the transformations that these curves have gone through, with emphasis on changing the geometric characteristics of the transition curves following the maintenance works caried out on these railway sections. Although the possibilities for improving existing situations on the field have been limited, efforts have been made to find optimal ways to redesign these curves. The paper presents the medium-term life cycle, 10-15 years, of some railway curves and proposes some ways of optimizing the transition between the alignments and the circular curves on the studied areas.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Colojoara, Carmen, Ion David e Mariana Marinovici. "Effects of pulsed CO 2 laser in caries selective ablation". In ROMOPTP '94: 4th Conference on Optics, editado por Valentin I. Vlad. SPIE, 1995. http://dx.doi.org/10.1117/12.203575.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gayen, Avijit, Tamoghna Mukherjea e Angshuman Jana. "Characterization of ‘Early Career Stage’ Researchers from their Co-authorship Network". In 2023 IEEE Guwahati Subsection Conference (GCON). IEEE, 2023. http://dx.doi.org/10.1109/gcon58516.2023.10183410.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Purohit, Gaurav, V. K. Chaubey e Kota Solomon Raju. "Hardware co-simulation of Walsh sequences for 3G Software Defined Radio". In 2013 International Conference on Control, Automation, Robotics and Embedded Systems (CARE). IEEE, 2013. http://dx.doi.org/10.1109/care.2013.6733776.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Wang, S., H. Chein, D. Tang e J. Yu. "384. Evaluation of Commercial Electrochemical CO Gas Monitors". In AIHce 1996 - Health Care Industries Papers. AIHA, 1999. http://dx.doi.org/10.3320/1.2765063.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Carpet Co"

Sears, P. L., W. H. Dawson e D. D. S. Liu. Upgrading of IPPL vacuum bottoms by the carpet hydrocracking process- runs 86-CG-1 to 6: a test of oil co-ground additive. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1986. http://dx.doi.org/10.4095/304385.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Seybold, Patricia. Co-Designing Health and Care with a Community. Boston, MA: Patricia Seybold Group, janeiro de 2015. http://dx.doi.org/10.1571/cs01-29-15cc.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gustafsson, Marcus, e Stephanie Cordova. Värdeskapande av koldioxid från biogasproduktion. Linköping University Electronic Press, setembro de 2023. http://dx.doi.org/10.3384/9789180753838.

Texto completo da fonte

Resumo:

arbon dioxide (CO₂) has a negative impact on the climate, but it also has several practical areas of use. Many industrial processes emit CO₂ in high concentrations, which could be captured to mitigate emissions while also creating valuable products. One example of such a process is biogas upgrading – a process separating renewable gases, where methane is taken care of for use as vehicle fuel or industrial energy carrier, while CO₂ is released into the atmosphere. The aim of this project has been to chart alternatives and technologies for taking care of green CO₂ from biogas upgrading, so-called carbon capture and utilization (CCU), and to investigate the conditions for applying these in a Swedish context. The work has been guided by the following research questions: * How large is the current and future potential for CCU from biogas production? * What are the possible areas of use for CO₂ from biogas production? * What factors influence the choice of areas of use for CO₂ from biogas production? * How large is the environmental benefit of CCU from biogas production? To answer these questions, calculations of potentials, a multi-criteria assessment and a life cycle assessment were carried out, based on the Swedish biogas production. A reference group comprising representatives for large Swedish companies within biogas production and biogas upgrading technology was used to enable coproduction and networking between the research group and the business sector. The production of CO₂ from biogas was estimated to 160,000 ton/year in 2020, with potential to increase to 540,000 – 840,000 ton/year in a few years and 790,000 – 1,230,000 ton/year in a longer perspective, as a consequence of an expected increase in the Swedish biogas production. A large share of the CO₂ is however produced at relatively small upgrading facilities, which could limit the feasibility for CCU due to high costs for investment and operation. Adding hydrogen to transform all the CO₂ into methane could potentially increase the methane production from biogas from 2 to 3 TWh/year in a short-term perspective and from 11 to 17 TWh/year in a long-term perspective, given sufficient access to hydrogen. Other ways of utilizing CO₂ from biogas include production of biomass or chemicals, concrete curing, pH control of process water and use as a refrigerant. The choice of CCU options can be influenced by environmental, technical, economic and policy-related aspects. From the biogas producers’ perspective, methanation is the option that is the most compatible with the existing production system and business model, while other solutions usually involve another actor taking care of the CO₂. Hydrogen is required for methanation as well as for production of chemicals. Another limiting factor are the high purity requirements on all CO₂ that is distributed and sold on the market. The geographical distribution of the production plants can also be a challenge. Several CCU options can improve the environmental performance of biogas by replacing fossil-based products. The potential climate impact is the lowest if the CO₂ is methanized with renewable hydrogen or mineralized in concrete, but other forms of environmental impact can also be reduced by applying these or other CCU options. For comparison, permanent storage of CO₂ in geological formations (carbon capture and storage, CCS) only reduces the climate impact, while it increases other forms of environmental impact. Furthermore, permanently storing biogenic CO₂ can make it difficult to reduce the use of fossil CO₂ and transition to a more sustainable society. The need for carbon in many essential processes and products suggests that biogenic CO₂ should be utilized and not stored.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Amy M. Brown, Donielle G. White, Rihem Badwe, Nikki Adams, Adaeze O’Jiaku-Okorie, Salah Shaikh, Adewumi Adegboye, Jooyeon Lee, Geoff Jackson e Carol DeFrances. Register DOI Func Reg Test 021324- National Hospital Care Survey Demonstration Projects: Characteristics and Mortality Outcomes of Opioid-involved Hospital Encounters With Co-occurring Disorders. Hyattsville, MD: National Center for Health Statistics (U.S.), julho de 2022. http://dx.doi.org/10.15620/cdc/133886.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Petrie, Christopher, e Frederika Warren. Spotlight on Employability. HundrED, dezembro de 2019. http://dx.doi.org/10.58261/ftpd4000.

Texto completo da fonte

Resumo:

Organized together with Sayling Wen Cultural and Educational Foundation HundrED Spotlight on Employability Skills is a curated collection of 10 education innovations offering inspiring solutions to provide future life and career skills for students. The HundrED Spotlight is co-organized together with the Foundation to start their NXTEducator program on the theme of employability.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Keane, Claire, Sean Lyons, Mark Regan e Brendan Walsh. HOME SUPPORT SERVICES IN IRELAND: EXCHEQUER AND DISTRIBUTIONAL IMPACTS OF FUNDING OPTIONS. ESRI, fevereiro de 2022. http://dx.doi.org/10.26504/sustat111.

Texto completo da fonte

Resumo:

A new statutory scheme for the provision of home support services is currently being developed by the Department of Health. Research has shown that access to home support services varies across the country. The new scheme aims to tackle this issue to ensure equitable access to home support services nationwide and is part of wider reform of Ireland’s health and social care systems as envisaged in the Sláintecare report and Department of Health action plans. Publicly funded home support services in Ireland are currently provided free of charge for recipients, unlike long-term residential or nursing home care, which involves a contribution from residents. In 2019, the HSE’s Older Persons’ Services provided care to 53,000 people at a cost of €440 million. It is anticipated that demand for home support services may increase under the new scheme, for example if unmet demand is met or if the new scheme results in more people being able to remain in their own home, substituting away from long-term residential care. Any increased demand would result in an increased cost, which may also rise as the population ages. This report examines the possible introduction of co-payments for home support services. We focus on the likely Exchequer impact of a range of different funding scenarios along with the distributional, poverty and inequality impacts of such charges. Due to data limitations, and the fact that the majority of home support services are provided to older age groups, we focus on those aged 65 years and over. Regarding co-payments we examine the impact of flat-rate charges for users, regardless of means, as well as co-payments for home support recipients above a variety of income levels. The tapering of payments is also examined to ensure that individuals just over a specific income threshold would see co-payments gradually increasing as their income rises. We also consider the capping of co-payments so that those needing a high number of home support hours would not potentially face very high costs.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pasha, Asmawan, Leimona, Wijaya e Setiawan. Commoditized or co-invested environmental services? Rewards for environmental services scheme: river care program. World Agroforestry Centre (ICRAF), 2012. http://dx.doi.org/10.5716/wp12051.pdf.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Brown, Amy, Donielle White, Nikki Adams, Adaeze O’Jiaku-Okorie, Rihem Badwe, Salah Shaikh e Adewumi Adegboye. Identifying Co-occurring Disorders Among Patients With an Opioid-involved Hospital Encounter Using National Hospital Care Survey Data. National Center for Health Statistics (U.S.), setembro de 2022. http://dx.doi.org/10.15620/cdc:119155.

Texto completo da fonte

Resumo:

This report documents the development of the 2016 National Hospital Care Survey Co-occurring Disorders Algorithm, which can be used to identify patients with an opioid-involved hospital encounter who had lifetime diagnoses of both a substance use disorderand a selected mental health issue.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Page, Kelly, Alexandra Merritt Johnson, Kristen Franklin, Bria Carter, Marilys Galindo, Teresa Solorzano, Sangyeon Lee e Zohal Shah. Learning Transition Design Principles for Learning and Employment Records: Co-designing for Equity. Digital Promise, julho de 2023. http://dx.doi.org/10.51388/20.500.12265/185.

Texto completo da fonte

Resumo:

Emerging technologies such as learning, and employment records (LER) have been identified as a promising solution for historically and systematically excluded (HSE) learners and workers to share and access their learning- and skills-data from their individual learning journeys and transitions. However, learning journeys are rarely linear; the way in which learners and workers may demonstrate and get recognized for their skills and competencies may evolve over time. Further, systemic barriers and inequities embedded in the learning journeys of HSE communities, disproportionately impact their ability to enter and persist in the education and workforce ecosystem. It is critical for LERs to be designed as accessible and equitably for HSE communities to mitigate systemic and structural inequities in the education and workforce ecosystem. With the generous support of the Bill & Melinda Gates Foundation, Digital Promise collaborated with HSE adult learners and workers, to establish a set of design principles to inform the development of LER technologies for use over an individual’s learning and career journeys, including their learning transitions. Through one-on-one interviews and group workshops with HSE adult learners and workers, fundamental design principles have been identified to influence LER data infrastructure from education to the workforce.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Texto completo da fonte

Resumo:

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!