Literatura científica selecionada sobre o tema "Carbonitrided steel"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Carbonitrided steel".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Carbonitrided steel"
Przyłęcka, M., W. Gęstwa e G. E. Totten. "Modelling of phase transformations and hardening of carbonitrided steels". Journal de Physique IV 120 (dezembro de 2004): 129–36. http://dx.doi.org/10.1051/jp4:2004120014.
Texto completo da fontePopova, N. A., E. L. Nikonenko, A. V. Nikonenko, V. E. Gromov e O. A. Peregudov. "INFLUENCE OF ELECTROLYTIC PLASMA CARBONITRIDING ON STRUCTURAL PHASE STATE OF FERRITIC-PEARLITIC STEELS". Izvestiya. Ferrous Metallurgy 62, n.º 10 (3 de novembro de 2019): 782–89. http://dx.doi.org/10.17073/0368-0797-2019-10-782-789.
Texto completo da fonteJagielska-Wiaderek, K. "Depth-Profiles of Corrosion Properties of Carbonitrided AISI 405 Steel". Archives of Metallurgy and Materials 57, n.º 2 (1 de junho de 2012): 637–42. http://dx.doi.org/10.2478/v10172-012-0068-6.
Texto completo da fonteGao, Jiewei, Guangze Dai, Junwen Zhao, Hengkui Li, Lei Xu e Zhenyu Zhu. "Influence of Indentation on the Fatigue Strength of Carbonitrided Plain Steel". Advances in Materials Science and Engineering 2015 (2015): 1–9. http://dx.doi.org/10.1155/2015/492693.
Texto completo da fonteDing, Hongqin, Shuyun Jiang e Jiang Xu. "Effect of chemical heat treatment on cavitation erosion resistance of stainless steel". Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233, n.º 11 (20 de abril de 2019): 1753–62. http://dx.doi.org/10.1177/1350650119845741.
Texto completo da fonteFan, Xin Min, Jie Wen Huang, Qun Yang e Jun Jie Gan. "Plasma Electrolytic Carbonitriding of 20CrMnTi Steel". Advanced Materials Research 154-155 (outubro de 2010): 1393–96. http://dx.doi.org/10.4028/www.scientific.net/amr.154-155.1393.
Texto completo da fonteStechyshyn, M. S., М. E. Skyba, N. М. Stechyshyna, О. О. Solariov e О. М. Kalnaguz. "Physicochemical Properties of Carbonitrided KhVG Steel". Materials Science 56, n.º 6 (maio de 2021): 837–42. http://dx.doi.org/10.1007/s11003-021-00502-9.
Texto completo da fonteStechyshyn, M. S., V. P. Oleksandrenko, А. V. Martynyuk, М. М. Luk’yanyuk, М. Ya Dovzhyk e V. О. Herasymenko. "Physicochemical Properties of Carbonitrided 40Kh Steel". Materials Science 56, n.º 3 (novembro de 2020): 369–74. http://dx.doi.org/10.1007/s11003-020-00439-5.
Texto completo da fonteIvanov, I. V., M. V. Mohylenets, K. A. Dumenko, L. Kryvchyk, T. S. Khokhlova e V. L. Pinchuk. "Carbonitration of a Tool for Pressing Stainless Steel Pipes". Journal of Engineering Sciences 7, n.º 2 (2020): C17—C21. http://dx.doi.org/10.21272/jes.2020.7(2).c3.
Texto completo da fonteVasil'eva, E. V., T. I. Chochaeva e M. V. Luchka. "Corrosion resistance of carbonitrided cases on 3Kh4M2FS steel". Soviet Materials Science 21, n.º 3 (1985): 287–88. http://dx.doi.org/10.1007/bf00730616.
Texto completo da fonteTeses / dissertações sobre o assunto "Carbonitrided steel"
Jeyabalan, Karthikeyan. "Experimental study and prediction of microstructures and internal stresses during heat treatment of carburized and carbonitrided low-alloyed steels". Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0379.
Texto completo da fonteCarbonitriding thermochemical treatments are used in automotive industry for improving fatigue and wear resistance of mechanical parts. These treatments aim to generate gradients of carbon and nitrogen in the surface aera of the piece by diffusion in the austenitic field, and with the following quenching the desired gradients of microstructures, mechanical properties, and compressive residual stresses on the surface are obtained. The objective of the PhD thesis is to better understand the effects of carbon and nitrogen gradients on the development of internal stresses during cooling in relationship with the phase transformations as well as on the residual stresses distributions after cooling. The approach consists first of the elaboration of laboratory samples with controlled carbon and nitrogen gradients representative of the parts. Then, the kinetics of phase transformations and the internal stresses evolutions have been analysed experimentally by in situ High Energy (synchrotron) X-ray Diffraction throughout the chemical composition gradients thanks to a specific new methodology. To our knowledge, it is the first time internal stresses can be measured in situ during cooling in gradient specimens. Unexpected results have been obtained in nitrogen enriched samples; it has been shown that the chronology of phase transformations between core and surface is inversed as compared to the more classical case of carburizing leading to completely inversed residual stress profiles with tensile stresses in the nitrogen enriched layer and compression in the core. It has been related to the acceleration of transformation kinetics in the nitrided layer that decreases its hardenability. A coupled thermal-metallurgical-mechanical model has been developed too to predict temperature evolutions, phase transformations kinetics, internal stresses evolutions as well as final microstructure, hardness and residual stress distributions in the gradient samples. The metallurgical model developed in a previous study has been implemented in the finite element code Zebulon. The thermomechanical behaviour law of the material is thermoelastoviscoplastic including transformation strains (volumic variations and transformation plasticity strains). All material parameters (thermomechanical and thermophysical parameters) are considered as temperature, phase and carbon and nitrogen dependent; they have been determined from experimental characterizations on carbon and nitrogen homogeneously enriched specimen and in house data. The simulations allowed to confirm and understand more in details the complex microstructure and internal stresses evolutions due to combined nitrogen and carbon gradients. The comparison between calculated and experimental results shows that the simulation gives the main tendencies of the experimental observations. The main discrepancies on the level of residual stresses are attributed to the underestimation of the retained austenite fractions as the present model does not take into account its stabilization during cooling
葉銘琪. "A study on TRD coating carbide and carbonitride on die steels in fluidized bed furnace". Thesis, 1998. http://ndltd.ncl.edu.tw/handle/21916196765411808513.
Texto completo da fonteChang, Dar-Liang, e 張達良. "A Study on the Composite Carbide,Nitride and Carbonitride Coating of Die Steels in a Fluidized Bed". Thesis, 1998. http://ndltd.ncl.edu.tw/handle/65369248295417149011.
Texto completo da fonte國立臺灣大學
機械工程學系研究所
86
A Study on the Composite Carbide,Nitride and Carbonitride Coating of Die Steels in a Fluidized Bed Abstract The implementation of a fluidized bed CVD process for the formation of hard wear-resistant , corrosion-resistant , oxidation-resistant , dense and strong adhesion coatings of carbides , nitrides and carbonitrides of die steels is feasible since it can lead to a flexible surface modification technology combining adaptability with reducing capital and operational costs . In this paper , FBCVD is coupled with conventional CVD and TRD(Thermo-Reactive Diffusion & Depostion Process) for the production of coatings . The method developed has the advantages of being simple , clean and environmentally friendly compared with conventional coatings . Die Steels(SKD11 & SKD61) were used for the substrates . For different coating species , this research involved a treating agent consisting of a powder mixture of Al2O3 with titanium powder , chromium powder or V-Fe powder . HCl was used as activator of the process . During the coating process , the bed can be fluidized by inert gas or gas mixtures like Ar , Ar+H2 , Ar+N2 etc . The present study reports on the characteristics of formation of TiC/TiN composite coating , CrC/VC composite carbide , CrCN , CrN on die steels . The experimental parameters such as temperature , time , gas composition ratio , powder content ratio , HCl concentration and prenitrided condition were investigated to appraise their effects on the growth rate of the coating species . The optimal processing condition was obtained from the evaluation of the experimental parameters . The growth rate and the microstructure of the coatings were investigated by measuring the weight change , the thickness and the hardness . EPMA was carried out to analyze the chemical composition of the coatings . XRD was also performed to examine the structure and compounds of the coatings . Coating investigations of corrosion resistance , oxidation resistance , adhesion strength and wear test reveal the coating effects in a fluidized bed . According to the results , TiC/TiN composite coating behaved better in adhesion strength and wear protection compared with TiC and TiN coating . Deposition of TiC/TiN composite coating can effectively retard the oxidation at temperature below 650℃ . The mechanical properties of CrC/VC composite carbide coating just lie between CrC and VC . The hardness and the tribological potential of CrC/VC composite carbide coating have been enhanced through the presentation of vanadium carbide . Coatings of CrCN or CrN were observed to have excellent adhesion strength and pronounced corrosion resistance to nitric acid(69%) and sulfuric acid(96%) . Both of CrCN and CrN were shown to have the highest oxidation resistance and proved to be oxidation resistant to at least 700℃ . Among the Ti-based coatings and the Cr-based coatings , CrCN had particularly high wear-resistance potential and CrN had the lowest oxidation rate .
Sello, Maitse P. "The laves phase embrittlement of ferritic stainless steel type aisi 441". Thesis, 2010. http://hdl.handle.net/2263/25481.
Texto completo da fonteThesis (PhD)--University of Pretoria, 2010.
Materials Science and Metallurgical Engineering
unrestricted
Livros sobre o assunto "Carbonitrided steel"
Ibraheem, A. K. Precipitation in the austenite of microalloyed low carbon steel. Manchester: UMIST, 1995.
Encontre o texto completo da fonteGrigorova, Nadejda G. Carbonitrides in nitrogen die and high speed steels: Chemical phase analysis. Sofia: [Intelsoft], 1995.
Encontre o texto completo da fonteCarbonitride Precipitation in Microalloyed Steel. British Steel, 1996.
Encontre o texto completo da fonteSuzuki, Shuichi. Stability of Ti and Ti-NB carbonitrides in steels during weld HAZ thermal cycles. 1985.
Encontre o texto completo da fonteCapítulos de livros sobre o assunto "Carbonitrided steel"
Sen, U., e S. Sen. "Characterization of Niobium Carbonitride Coating on AISI D2 Steel". In Materials Science Forum, 213–17. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-439-1.213.
Texto completo da fonteTrivedi, Hitesh K. "Rolling Contact Fatigue Performance of Carbonitrided Pyrowear 675 at 218°C with MIL-PRF-23699G". In Bearing and Transmission Steels Technology, 74–94. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2024. http://dx.doi.org/10.1520/stp164920220089.
Texto completo da fonteLu, Qi, Wei Xu e Sybrand van der Zwaag. "Model Based Redesign of MX Carbonitrides Strengthened Austenitic Heat Resistant Steels". In TMS2013 Supplemental Proceedings, 327–34. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118663547.ch41.
Texto completo da fonteYoshino, Masataka, Yoshinao Mishima, Yoshiaki Toda, Hideaki Kushima, Kota Sawada e Kazuhiro Kimura. "Effect of Ausageing on the Precipitation Behavior of MX Carbonitride in Modified 9Cr-1Mo Steel". In THERMEC 2006, 2976–81. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-428-6.2976.
Texto completo da fonteSan Martín, David, Francisca García Caballero, Carlos Capdevila e Carlos García de Andrés. "Discussion on the Rate Controlling Process of Coarsening of Niobium Carbonitrides in a Niobium Microalloyed Steel". In Materials Science Forum, 703–10. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-981-4.703.
Texto completo da fonte"Sources of Failures in Carburized and Carbonitrided Components". In Failure Analysis of Heat Treated Steel Components, 177–240. ASM International, 2008. http://dx.doi.org/10.31399/asm.tb.fahtsc.t51130177.
Texto completo da fonteAbd, Ahmed. "Corrosion performance and tribological properties of carbonitrided 304 stainless steel". In Corrosion Resistance. InTech, 2012. http://dx.doi.org/10.5772/33664.
Texto completo da fonte"Carbonitriding". In Gear Materials, Properties, and Manufacture, 245–47. ASM International, 2005. http://dx.doi.org/10.31399/asm.tb.gmpm.t51250245.
Texto completo da fonteLifang, Xia, e Ma Xinxin. "An Investigation of the Reason for the Intergranular Fracture Appearing at the Great Quantity of Retained Austenite Zone in the Ion Carbonitrided Layers of Steel 20Cr2Ni4A". In Strength of Metals and Alloys (ICSMA 8), 1153–58. Elsevier, 1989. http://dx.doi.org/10.1016/b978-0-08-034804-9.50182-0.
Texto completo da fonte"Gaseous Ferritic Nitrocarburizing". In Practical Nitriding and Ferritic Nitrocarburizing, 219–30. ASM International, 2003. http://dx.doi.org/10.31399/asm.tb.pnfn.t65900219.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Carbonitrided steel"
Vilela Costa, Larissa, Vincent Lelong, Dennis Beauchesne, Robert L. Cryderman e Kip O. Findley. "Fatigue Performance of Low Pressure Carbonitrided 20MnCr5 and SAE 8620 Steel Alloys". In HT2021. ASM International, 2021. http://dx.doi.org/10.31399/asm.cp.ht2021p0187.
Texto completo da fonteSharma, Udit, e Douglas G. Ivey. "Microstructure of Microalloyed Linepipe Steels". In 2000 3rd International Pipeline Conference. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/ipc2000-125.
Texto completo da fonteMito, Yusuke, Kazuhiro Miki, Tsukasa Azuma, Tohru Ishiguro, Osamu Tamura, Yoshinori Murata e Masahiko Morinaga. "Effects of Cr and W Content in High Cr Ferritic Heat-Resistant Steels on Long-Term Creep Rupture Strength". In AM-EPRI 2013, editado por D. Gandy e J. Shingledecker. ASM International, 2013. http://dx.doi.org/10.31399/asm.cp.am-epri-2013p0627.
Texto completo da fonteDudko, V., J. Borisova, R. Kaibyshev, V. Skorobogatykh e I. Schenkova. "Microstructural Changes in GX12CRMOWVNBN10-1-1 Steel During Creep at 893 K". In AM-EPRI 2016, editado por J. Parker, J. Shingledecker e J. Siefert. ASM International, 2016. http://dx.doi.org/10.31399/asm.cp.am-epri-2016p0714.
Texto completo da fonteRothleutner, Lee, Chester Van Tyne e Robert Goldstein. "Influence of Vanadium Microalloying on the Microstructure of Induction Hardened 1045 Steel Shafts". In HT 2017. ASM International, 2017. http://dx.doi.org/10.31399/asm.cp.ht2017p0201.
Texto completo da fonteBaolan, Gu, Shou Binan, Xu Tong e Wu Zhiying. "The Microstructure Stability of the 10Cr9MoW2VNbBN Heat Resistant Steel". In ASME 2014 Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/etam2014-1030.
Texto completo da fonteLu, Qi, Wei Xu e Sybrand van der Zwaag. "A Computational Design Study of Novel Creep Resistant Steels for Fossil Fuel Power". In AM-EPRI 2013, editado por D. Gandy e J. Shingledecker. ASM International, 2013. http://dx.doi.org/10.31399/asm.cp.am-epri-2013p1441.
Texto completo da fonteZhang, Lei, Liang He e R. D. Sisson. "Enhancement of Carbonitride Tool— Retained Austenite and Microhardness Prediction". In HT 2015. ASM International, 2015. http://dx.doi.org/10.31399/asm.cp.ht2015p0308.
Texto completo da fonteYu, Chi, Feng Yang e Jinping Suo. "The Effect of Ti, N and V Content and Heat Treatment on Irradiation and Mechanical Property of SCRAM Steels". In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-30625.
Texto completo da fonteSawada, Kota, Kazuhiro Kimura e Masaaki Tabuchi. "Effect of Stress State on Microstructural Change during Creep in Grade 92 Steel Welded Joint". In AM-EPRI 2013, editado por D. Gandy e J. Shingledecker. ASM International, 2013. http://dx.doi.org/10.31399/asm.cp.am-epri-2013p0607.
Texto completo da fonte