Literatura científica selecionada sobre o tema "Bonding efficiency function"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Bonding efficiency function".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Bonding efficiency function"
Du, Chao, Yali Zhao e Yong Li. "Theoretical Derivation of the Effect of Bonding Current on the Bonding Interface during Anodic Bonding of PEG-Based Encapsulation Materials and Aluminum". Polymers 15, n.º 4 (11 de fevereiro de 2023): 913. http://dx.doi.org/10.3390/polym15040913.
Texto completo da fonteGuadagno, Liberata, Luigi Vertuccio, Carlo Naddeo, Elisa Calabrese, Giuseppina Barra, Marialuigia Raimondo, Andrea Sorrentino, Wolfgang H. Binder, Philipp Michael e Sravendra Rana. "Development of aeronautical epoxy nanocomposites having an integrated selfhealing ability". MATEC Web of Conferences 233 (2018): 00021. http://dx.doi.org/10.1051/matecconf/201823300021.
Texto completo da fonteLi, Zhao Qian, Bo Hua Nan, Teng Feng He e Guan Xiang Feng. "Study of Bonding Technology and Property of Foam-Sandwich Co-Bulkhead of Cryogenic Tank on Launch Vehicle". Materials Science Forum 817 (abril de 2015): 639–44. http://dx.doi.org/10.4028/www.scientific.net/msf.817.639.
Texto completo da fonteMankodi, Hireni. "Geocomposite Manufactured from PP Nonwoven/HDPE Geonet". Advanced Materials Research 622-623 (dezembro de 2012): 1310–13. http://dx.doi.org/10.4028/www.scientific.net/amr.622-623.1310.
Texto completo da fonteShen, Jiacong, Junqi Sun e Xi Zhang. "Polymeric nanostructured composite films". Pure and Applied Chemistry 72, n.º 1-2 (1 de janeiro de 2000): 147–55. http://dx.doi.org/10.1351/pac200072010147.
Texto completo da fonteSu, Ye, Ye Yutang, Xie Yu, Yi Maoli, Zhang Jing, Luo Ying e Du Chunlei. "Swift perspective shape matching algorithm based on Phong’s model for FPC stiffener bonding systems". Circuit World 40, n.º 4 (28 de outubro de 2014): 141–49. http://dx.doi.org/10.1108/cw-06-2014-0023.
Texto completo da fonteDi Pumpo, Antonietta, Mark Weller, Sax Mason e Marie-Hélène Lemée-Cailleau. "Hydrogen bonding structure and polymorphism in agrochemicals". Acta Crystallographica Section A Foundations and Advances 70, a1 (5 de agosto de 2014): C540. http://dx.doi.org/10.1107/s2053273314094595.
Texto completo da fontePearson, Heidi C. "Unravelling the function of dolphin leaps using the dusky dolphin (Lagenorhynchus obscurus) as a model species". Behaviour 154, n.º 5 (2017): 563–81. http://dx.doi.org/10.1163/1568539x-00003434.
Texto completo da fonteWang, Ce, Shuai Guan, Md Sabbrojjaman e T. Tafsirojjaman. "Bond Performance of CFRP Strands to Grouting Admixture for Prestressed Structure and Development of Their Bond–Slip Constitutive Models". Polymers 15, n.º 13 (30 de junho de 2023): 2906. http://dx.doi.org/10.3390/polym15132906.
Texto completo da fonteNobbs, T. J., A. Cortés, J. L. Gelpi, J. J. Holbrook, T. Atkinson, M. D. Scawen e D. J. Nicholls. "Contribution of a buried aspartate residue towards the catalytic efficiency and structural stability of Bacillus stearothermophilus lactate dehydrogenase". Biochemical Journal 300, n.º 2 (1 de junho de 1994): 491–99. http://dx.doi.org/10.1042/bj3000491.
Texto completo da fonteTeses / dissertações sobre o assunto "Bonding efficiency function"
Aguilar, Boris. "Experimental study and numerical modeling of accretion phenomena of snow particles at the origin of the formation of accretions on aeronautical structures or civil engineering". Electronic Thesis or Diss., Toulouse, ISAE, 2024. http://www.theses.fr/2024ESAE0003.
Texto completo da fonteTo ensure safe flight under snowy conditions, aircraft manufacturers must demonstrate that each engine and its air inlet system can operate throughout the flight power range of the engine (including idling) in both falling and blowing snow conditions. This study is part of an effort to develop models for snow accretion.To establish the starting framework of this work on the modeling of snow icing, Chapter 1 is dedicated to a literature review organized in three parts. In the first part, the different processes of snow creation in the atmosphere are detailed in order to define the snow that will be studied here. In a second part, a literature review on the modelling of ice crystals icing is conducted and constitutes the starting point of this work from the modeling point of view. Finally, a third part relates the current experimental means to measure the snow conditions and the associated advantages and disadvantages.In the chapter 2 we study drag models adapted to the case of snowflakes for calculating particle trajectories. As mentioned in the state of the art, the classical models developed for non-spherical particles are proving sufficiently accurate for ice crystals. The aim here is twofold. Firstly, to check that the models valid for ice crystals are still valid for snowflakes, which are in fact aggregates of particles, much larger and of complex geometric shape. Secondly, the drag models proposed must be compatible with the type of input data. For example, at the end of a flight test campaign, particles can only be described using 2D images, a far cry from a complete and detailed 3D description of the snowflake. In light of the level of accuracy of the input data used to describe the particle, the aim of this chapter is to propose drag models based on a simple and limited geometric description of snowflakes.The chapter 3 is the equivalent of Chap. 2 for adapting heat and mass transfer models for snowflakes. The melting process of a snowflake transported by a hot air flow is studied. Once again, the requirement is twofold. Firstly, to check whether the models developed for ice crystals can be easily extended to the case of snowflakes. Secondly, to propose models for which the complexity of the input data is compatible with the level of accuracy of the databases. As a reminder, 3D descriptions of snowflakes are scarce and difficult to obtain. In many cases, a single 2D image of the particle from a flight test campaign is available. In this chapter, particular emphasis is placed on describing the particle's bulk density, and in particular its evolution during the melting process. In fact, bulk density can vary widely, from a few kg/m3 for the dry particle to 997 kg/m3 for the water droplet resulting from the melting process.At the end of the Chapters 2 and 3, models were proposed for the trajectory of the flakes and for monitoring the melting process. It is thus possible to estimate the location of the impact and the amount of water carried by the flakes. The next physical step concerns the accretion of snow particles. Experimental data will be used to validate or improve the ice crystal accretion models. To our knowledge, no database dealing with snow accretion under aeronautical conditions has been made available so far in the literature. It is in this concept that, this chapter deals with the design and the realization of such "snow" accretion tests. A first comparison with the numerical simulations of the ONERA icing code IGLOO2D will also be proposed
Livros sobre o assunto "Bonding efficiency function"
Shrestha, Manoj K., e Richard C. Feiock. Local Government Networks. Editado por Jennifer Nicoll Victor, Alexander H. Montgomery e Mark Lubell. Oxford University Press, 2016. http://dx.doi.org/10.1093/oxfordhb/9780190228217.013.22.
Texto completo da fonteCapítulos de livros sobre o assunto "Bonding efficiency function"
Woo, Chulsoo, Bin Liang e Jonghyuk Oh. "Global Trend of Glass Bonding for Appliance Industry Assemblies". In Advanced Functional Materials. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.90515.
Texto completo da fonteChandra Sahu, Bharat. "Organic Corrosion Inhibitors". In Introduction to Corrosion - Basics and Advances [Working Title]. IntechOpen, 2023. http://dx.doi.org/10.5772/intechopen.109523.
Texto completo da fonteKislev, Elyakim. "Relationships 1.0". In Relationships 5.0, 25–42. Oxford University Press, 2022. http://dx.doi.org/10.1093/oso/9780197588253.003.0002.
Texto completo da fonteHale Aygün, Hayriye. "Epoxy Composites for Radiation Shielding". In Epoxy-Based Composites [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.104117.
Texto completo da fonteUsenko, Dmytro, Iryna Usenko e Veniamin Soloviev. "THE INFLUENCE OF HETEROGENEOUS MEDIUM MICROSCOPIC PROPERTIES ON PREDICTING MACROSCOPIC PROPERTIES OF MASONRY". In Traditional and innovative scientific research: domestic and foreign experience. Publishing House “Baltija Publishing”, 2024. http://dx.doi.org/10.30525/978-9934-26-436-8-2.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Bonding efficiency function"
Tan, Xiao, Zhi Tao, Tiantong Xu e Haiwang Li. "One-Time Multi-Depth Silicon Etching Method Based on SiO2 Masking Layer". In ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/mnhmt2016-6670.
Texto completo da fonteCiardelli, G., F. M. Montevecchi, P. Giusti, D. Silvestri, I. Morelli, C. Cristallini e G. Vozzi. "Molecular Imprinted Nanostructures in Biomedical Applications". In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95669.
Texto completo da fonteAlMusharraf, N., P. Asthana, A. Sulaiman, S. Jacob e A. Bukhamseen. "Configurable Adaptive Chemical Inflow Control Device Component Level Design and Evaluation". In Offshore Technology Conference. OTC, 2024. http://dx.doi.org/10.4043/35107-ms.
Texto completo da fonteMajeed, Majed A., Khaled Alhazza e Altaf AlSnafi. "Multi-Mode Vibration Control of Plates Using a Single Actuator and a Single Sensor". In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65660.
Texto completo da fonteKliemann, J. O., H. Gutzmann, F. Gärtner, T. Klassen, I. Jursic e C. Borchers. "Layer Formation of Cold-Sprayed Ceramic Titanium Dioxide Layers on Metal Surfaces". In ITSC2010, editado por B. R. Marple, A. Agarwal, M. M. Hyland, Y. C. Lau, C. J. Li, R. S. Lima e G. Montavon. DVS Media GmbH, 2010. http://dx.doi.org/10.31399/asm.cp.itsc2010p0090.
Texto completo da fonteItoh, Nobuhide, Hitoshi Ohmori, Toshio Kasai e Toshiro Karaki-Doy. "Ultraprecision Smooth Surface Finishing with ELID-Iap Grinding using Metal-Resin Bonded Wheels". In Optical Fabrication and Testing. Washington, D.C.: Optica Publishing Group, 1998. http://dx.doi.org/10.1364/oft.1998.otuc.4.
Texto completo da fonteAlkhalaf, Sara, Abdullah Al-Yami, Vikrant Wagle e Ali Al-Safran. "Development of New Inhibited Spacer for Cementing Operation". In ASME 2022 41st International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/omae2022-80939.
Texto completo da fonteRitter, A. M., M. R. Jackson, N. Abuaf, M. A. Lacey, A. S. Feitelberg e P. Lang. "Joining of Wrought Ni-Base Combustor Alloys". In ASME 1996 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-gt-219.
Texto completo da fonteBellamkonda, Ramya, Tom John, Bobby Mathew, Hisham Hegab, Mark DeCoster e Despina Davis. "Nanowire-GMR Integrated Microfluidic Biosensor". In ASME 2009 Fluids Engineering Division Summer Meeting. ASMEDC, 2009. http://dx.doi.org/10.1115/fedsm2009-78529.
Texto completo da fonteMustafa, Irfan, e Tsz-Ho Kwok. "Development of Intertwined Infills to Improve Multi-Material Interfacial Bond Strength". In ASME 2021 16th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/msec2021-63965.
Texto completo da fonteRelatórios de organizações sobre o assunto "Bonding efficiency function"
Oliynyk, Kateryna, e Matteo Ciantia. Application of a finite deformation multiplicative plasticity model with non-local hardening to the simulation of CPTu tests in a structured soil. University of Dundee, dezembro de 2021. http://dx.doi.org/10.20933/100001230.
Texto completo da fonte