Literatura científica selecionada sobre o tema "Biphasic metal/polymer sublayer"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Biphasic metal/polymer sublayer".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Biphasic metal/polymer sublayer"
Shugurov, A. R., A. I. Kozel’skaya e A. V. Panin. "Viscoelastic wrinkling in compression-stressed metal film-polymer sublayer system". Technical Physics Letters 37, n.º 10 (outubro de 2011): 896–99. http://dx.doi.org/10.1134/s1063785011100130.
Texto completo da fonteWon, Eun-Seo, e Jong-Won Lee. "Biphasic Solid Electrolytes with Homogeneous Li-Ion Transport Pathway Enabled By Metal-Organic Frameworks". ECS Meeting Abstracts MA2022-01, n.º 55 (7 de julho de 2022): 2248. http://dx.doi.org/10.1149/ma2022-01552248mtgabs.
Texto completo da fonteMohammed, Wadood Taher, e Ahmed Salih Mahdi. "Liquid-Liquid Extraction of Metal Ions Using Aqueous Biphasic Systems". Journal of Engineering 18, n.º 09 (21 de julho de 2023): 989–98. http://dx.doi.org/10.31026/j.eng.2012.09.01.
Texto completo da fonteSergeevichev, David S., Svetlana I. Dorovskikh, Evgeniia S. Vikulova, Elena V. Chepeleva, Maria B. Vasiliyeva, Tatiana P. Koretskaya, Anastasiya D. Fedorenko et al. "Vapor-Phase-Deposited Ag/Ir and Ag/Au Film Heterostructures for Implant Materials: Cytotoxic, Antibacterial and Histological Studies". International Journal of Molecular Sciences 25, n.º 2 (16 de janeiro de 2024): 1100. http://dx.doi.org/10.3390/ijms25021100.
Texto completo da fonteGК, Mamytbekov. "Hybrid Composite Materials for Immobilization of Radionuclides in Liquid Radioactive Waste". Journal of Mineral and Material Science (JMMS) 4, n.º 1 (13 de fevereiro de 2023): 1–6. http://dx.doi.org/10.54026/jmms/1053.
Texto completo da fonteLiang, Yannan, Christopher Watson, Thomas Malinski, Justin Tepera e David E. Bergbreiter. "Soluble polymer supports for homogeneous catalysis in flow reactions". Pure and Applied Chemistry 88, n.º 10-11 (1 de novembro de 2016): 953–60. http://dx.doi.org/10.1515/pac-2016-0801.
Texto completo da fontePoudel, Ishwor, Manjusha Annaji, Robert D. Arnold, Amal Kaddoumi, Nima Shamsaei, Seungjong Lee, Jonathan Pegues et al. "Dexamethasone eluting 3D printed metal devices for bone injuries". Therapeutic Delivery 11, n.º 6 (junho de 2020): 373–86. http://dx.doi.org/10.4155/tde-2020-0014.
Texto completo da fonteLiu, Huaizhi, Yumeng Xin, Hari Krishna Bisoyi, Yan Peng, Jiuyang Zhang e Quan Li. "Stimuli‐Driven Insulator–Conductor Transition in a Flexible Polymer Composite Enabled by Biphasic Liquid Metal (Adv. Mater. 43/2021)". Advanced Materials 33, n.º 43 (outubro de 2021): 2170336. http://dx.doi.org/10.1002/adma.202170336.
Texto completo da fonteMamytbekov, Galymzhan Kulamkadyrovich, Dmitry Anatol’evich Zheltov e Yernat Rashidovich Nurtazin. "Synthesis and Investigation of the Properties of Biphasic Hybrid Composites Based on Bentonite, Copper Hexacyanoferrate, Acrylamide and Acrylic Acid Hydrogel". Polymers 15, n.º 12 (6 de junho de 2023): 2586. http://dx.doi.org/10.3390/polym15122586.
Texto completo da fonteJeong, Wooyoung, Hyeonseo Joo, Ju Hyuck Lee e Jong-Won Lee. "Suppressing Interfacial Degradation of Li7La3Zr2O12 Solid Electrolytes in H2O/CO2 via Polymer Encapsulation". ECS Meeting Abstracts MA2022-02, n.º 4 (9 de outubro de 2022): 389. http://dx.doi.org/10.1149/ma2022-024389mtgabs.
Texto completo da fonteTeses / dissertações sobre o assunto "Biphasic metal/polymer sublayer"
Zhang, Teng. "Elaboration and characterization of functionalized hybrid carbon fiber reinforced composites (CFRCs) for innovative applications". Electronic Thesis or Diss., Bourgogne Franche-Comté, 2024. http://www.theses.fr/2024UBFCA005.
Texto completo da fonteCarbon fiber reinforced composites (CFRC) have been successfully developed since decades as efficient and lightweight materials for various innovative applications and mostly for transport applications. Due to the low electrical conductivity of the polymer matrix of CFRCs, a better functionalization of such materials, such as developing a metallic coating on the CFRC structure of an aircraft, brings added values that contribute to a longer life and new performances such as the lightning strike protection (LSP) performance. The major objective of this PhD research program is to improve the metallization of a CFRC substrate by a new approach that focuses on the development of a hybrid layered structure made of CFRC and a biphasic sublayer embedded onto the top surface of this structure, prior to a cold spray metallization. To achieve this objective, the research works rely on an experimental task and a computational analysis which can be divided into three significant contributions:The first experimental part focuses on the development of a biphasic sublayer in between the CFRC substrate and the metal coating. This sublayer consists of a mixture of a polymer (Thermoset Epoxy, Thermoplastic Polymethyl methacrylate) with a micron sized metal powder (Al, Cu). The vacuum assisted resin infusion process is used to produce the hybrid CFRC with the biphasic sublayer on its top face. Prior to the cold spray metallization, the thermo-physical properties of the hybrid CFRCs/biphasic sublayer are characterized using a differential scanning calorimetry (DSC) analysis and a thermal conductivity measurement. The mechanical properties of the hybrid CFRC system are characterized by means of mechanical testing (impact test, tensile test, three-point flexural test, lap-shear adhesion test).The second part of this PhD work investigates the metallization of the hybrid system CFRC/biphasic sublayer using the low-pressure cold spray Dymet 423 system. Copper, aluminum, zinc, and tin powders are used as coating material due to their good electrical and thermal conductivity. Powder mixtures made of these metals and alumina powders (Al2O3) are considered as other potential materials for the cold spray metallization of the biphasic sublayer/CFRC system. An embedment of the cold spray powders onto the biphasic sublayer is found to ease the coating formation, except for the Cu cold spray powder. A continuous 60 μm thick coating of Sn+Al2O3 is obtained onto the biphasic TS-Cu sublayer, that shows the feasibility of surface functionalization of CFRC via a biphasic sublayer and a low-pressure cold spraying.The third part of this PhD work focuses on a phenomenological analysis of the mechanical response of the TS biphasic sublayer during the high-speed collision of the cold spray process. This part aims to depict further improvements through a computational analysis. The erosion issue of the epoxy matrix of the sublayer is found to govern the unsuccessful coating formation onto the thermoset sublayer. Therefore, to find out suitable biphasic polymer materials, a simulation of a Cu powder collision onto thermoplastic media (TP and TP-Cu) has been investigated, that shows a good embedment of the Cu powder onto the TP substrate via a mechanical interlocking (metal-to-resin bonding). The copper particles of the biphasic TP-Cu sublayer enable to promote a plastic deformation of the sprayed Cu particles and is conducive to a bonding formation and coating growth. Finally, to provide a proof of concept, experimental HPCS metallization onto biphasic sublayers made of a TP matrix are performed. A continuous coating formation of spherical Cu, dendritic Cu, and Cu+Al2O3 is obtained onto TP-Cu sublayer, with a thickness of 95 µm, 231 µm, and 114 μm respectively. Thereby, the feasibility of the metallization of CFRC via a TP biphasic sublayer and a high-pressure cold spray deposition has been demonstrated
Trabalhos de conferências sobre o assunto "Biphasic metal/polymer sublayer"
Zhang, T., E. Padayodi, R. N. Raoelison e J. C. Sagot. "Development of Compatibilizing Sublayer for Metallizing CFRP Structures by Cold Spray". In ITSC2022. DVS Media GmbH, 2022. http://dx.doi.org/10.31399/asm.cp.itsc2022p0893.
Texto completo da fonteLawn, Brian R. "Failure of Ceramic Coatings on Soft Substrates". In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2661.
Texto completo da fonte