Literatura científica selecionada sobre o tema "Binder blends"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Binder blends".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Binder blends"
Herndon, Rebecca M., Jay Balasubramanian, Klaus Woelk e Magdy Abdelrahman. "Physical and Chemical Methods to Assess Performance of TPO-Modified Asphalt Binder". Applied Sciences 14, n.º 8 (14 de abril de 2024): 3300. http://dx.doi.org/10.3390/app14083300.
Texto completo da fonteÇolak, Adnan. "Physical, mechanical, and durability properties of gypsumPortland cementnatural pozzolan blends". Canadian Journal of Civil Engineering 28, n.º 3 (1 de junho de 2001): 375–82. http://dx.doi.org/10.1139/l00-123.
Texto completo da fonteZhu, Yuefeng, Jiawei Zhang, Chundi Si, Tao Yan e Yanwei Li. "Laboratory Evaluation on Performance of Recycled Asphalt Binder and Mixtures under Short-Term Aging Conditions". Sustainability 13, n.º 6 (19 de março de 2021): 3404. http://dx.doi.org/10.3390/su13063404.
Texto completo da fonteAshtiani, Milad Zokaei, Walaa S. Mogawer e Alexander J. Austerman. "A Mechanical Approach to Quantify Blending of Aged Binder from Recycled Materials in New Hot Mix Asphalt Mixtures". Transportation Research Record: Journal of the Transportation Research Board 2672, n.º 28 (20 de agosto de 2018): 107–18. http://dx.doi.org/10.1177/0361198118787634.
Texto completo da fonteAeron, P., e P. Aggarwal. "Effect of aging on reclaimed asphalt pavement and rejuvenators". IOP Conference Series: Materials Science and Engineering 1248, n.º 1 (1 de julho de 2022): 012099. http://dx.doi.org/10.1088/1757-899x/1248/1/012099.
Texto completo da fonteAguirre, Max A., Marwa M. Hassan, Sharareh Shirzad, Louay N. Mohammad, Samuel B. Cooper e Ioan I. Negulescu. "Performance Characteristics of Asphalt Binders containing Sodium-Alginate Hollow Fibers and Recycled Materials". MATEC Web of Conferences 271 (2019): 03004. http://dx.doi.org/10.1051/matecconf/201927103004.
Texto completo da fonteLindh, Per, e Polina Lemenkova. "Simplex Lattice Design and X-ray Diffraction for Analysis of Soil Structure: A Case of Cement-Stabilised Compacted Tills Reinforced with Steel Slag and Slaked Lime". Electronics 11, n.º 22 (14 de novembro de 2022): 3726. http://dx.doi.org/10.3390/electronics11223726.
Texto completo da fonteKarki, Pravat, e Fujie Zhou. "Systematic Method for Quantifying Re-Refined Engine Oil Bottom Content in Binders: Using X-Ray Fluorescence Spectroscopy". Transportation Research Record: Journal of the Transportation Research Board 2632, n.º 1 (janeiro de 2017): 52–59. http://dx.doi.org/10.3141/2632-06.
Texto completo da fonteOwaid, Haider Mohammed, Roszilah Hamid e Mohd Raihan Taha. "Influence of Thermally Activated Alum Sludge Ash on the near Surface Characteristics of Multiple-Blended Binders Concretes". Applied Mechanics and Materials 754-755 (abril de 2015): 421–26. http://dx.doi.org/10.4028/www.scientific.net/amm.754-755.421.
Texto completo da fonteKogbara, Reginald B. "A review of the mechanical and leaching performance of stabilized/solidified contaminated soils". Environmental Reviews 22, n.º 1 (março de 2014): 66–86. http://dx.doi.org/10.1139/er-2013-0004.
Texto completo da fonteTeses / dissertações sobre o assunto "Binder blends"
Forton, Andrei-Roman. "Thermomechanical behaviour of bituminous materials including RAP and rejuvenator and environmental impact of their fabrication process". Electronic Thesis or Diss., Lyon, 2021. http://www.theses.fr/2021LYSET005.
Texto completo da fonteThe study presented in this thesis has been carried out within a collaboration between Politehnica University Timisoara (UPT) from Romania and Université de Lyon/École Nationale des Travaux Publics de l'État (ENTPE), laboratory LTDS from France. The objectives are, i) the characterization of the thermomechanical performances of binder blends and bituminous mixtures produced with Reclaimed Asphalt Pavement (RAP) and rejuvenator and, ii) the investigation of the potential environmental impact related to the production of a mixture containing different amounts of RAP material and rejuvenator. Therefore, comprehensive experimental investigations were performed on binders and mixtures. All tests on binders and mixtures were performed in the Road Laboratory from UPT, together with the environmental impact assessment. On the other hand, the analyses, estimations and predictions of most parameters/characteristics of binders and mixtures were performed at ENTPE. The study on binders focused on the properties of different binder blends produced by mixing one type of fresh binder (a straight run 50/70 pen. grade), a RAP-extracted binder and a rejuvenator of vegetal origin. The study on mixtures focused on the investigation on 13 bituminous mixtures
Soleymani, Hamid-Reza. "Viscoelastic characterization of blended binders for asphalt pavement recycling". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0008/NQ27432.pdf.
Texto completo da fonteIqbal, Md Tanvir. "Evaluation of Asphalt Mixtures Incorporating Terminal Blend GTR (Ground Tire Rubber) Binders". Ohio University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1462970773.
Texto completo da fonteShams, M. A. "The use of ternary blended binders in high-consistence concrete". Thesis, University College London (University of London), 2014. http://discovery.ucl.ac.uk/1437231/.
Texto completo da fonteJafer, H. M. "Soft soil stabilisation using a novel blended cementitious binder produced from waste fly ashes". Thesis, Liverpool John Moores University, 2017. http://researchonline.ljmu.ac.uk/7541/.
Texto completo da fonteMizerová, Cecílie. "Binární alkalicky aktivované kompozitní materiály s cihelným prachem". Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372259.
Texto completo da fonteZaťko, Petr. "Vliv rozptýlené výztuže na průběh zrání polymercementových hmot". Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265336.
Texto completo da fonteZáruba, Jiří. "Vývoj požárně odolných správkových malt s jemnozrnným plnivem". Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227280.
Texto completo da fonteQiu, Yue-Hong, e 邱耀弘. "Development of a Colored Tetragonal Zirconia Polycrystals Powder- Binder Blend". Thesis, 1996. http://ndltd.ncl.edu.tw/handle/75455043034873967602.
Texto completo da fonteDu, Preez Morne Phillip. "Sensitivity of strength and durability properties of blended cement concrete to changes in water/binder ratio and binder content". Thesis, 2019. https://hdl.handle.net/10539/28070.
Texto completo da fonteThere are numerous studies that assess the effects of changes in the water/binder (w/b) ratio and binder content on strength and durability properties of concrete. However, limited information is available on the extent to which changes in w/b ratio and binder content affects concrete strength and durability. This study focused on the sensitivity of concrete to changes in these parameters to further the understanding of the material by determining the importance of the parameters on the resultant concrete properties and providing practical guidelines for the mix design process. Concrete test specimens were made using two w/b ratios (0.45 and 0.65), two binder contents (350 and 450kg/m³) and three binder types PC (plain Portland Cement), 70/30 PC/fly ash (FA) and 50/50 PC/ground-granulated blastfurnace slag (GGBS). One parameter was varied at a time. Compressive strength tests were conducted at 3, 7, 14, 28 and 56 days and durability index tests at 28 and 56 days. The results indicate that increases in w/b ratio lead to lower compressive strengths and increased permeability, sorptivity and chloride conductivity. Increases in binder content have beneficial effects on compressive strength; however, this trend does not continue indefinitely and is related to the paste content range, aggregate content and grading. Furthermore, binder content increases proved to be detrimental to concrete durability by decreasing the oxygen permeability (OPI) and increasing the water sorptivity (WSI) and chloride conductivity (CCI) indices. In general, for all the binder types investigated, both the strength and durability properties were more sensitive to changes in w/b ratio than binder content. The compressive strength of FA concretes was the most affected by a change in w/b ratio. The sensitivity hierarchy of compressive strength of PC and GGBS concretes to a change in w/b ratio varied with age. For the three different binder types, sensitivity of compressive strength to changes in w/b ratio generally decreased with age. The extent to which a change in binder content affects compressive strength varies with age and no clear binder type hierarchy is evident. The w/b ratio therefore remains the controlling factor of compressive strength. For the parameters tested, the OPI of FA concretes exhibited the highest sensitivity to changes in w/b ratio followed by GGBS and PC concretes respectively. Moreover, GGBS concretes were the most sensitive to changes in binder content followed by PC and FA concretes. As with compressive strength, sensitivity of OPI to changes in both w/b ratio and binder content decreases with age. The sensitivity variance of OPI between changes in w/b ratio and binder content is considered to be minimal, less than 5.0%, and therefore both of these parameters need to be carefully considered in the mix design process when assessing permeability requirements. The results also indicate that the sensitivity of WSI to changes in w/b ratio follows a similar pattern to compressive strength and decreases in the following order: FA > PC > GGBS. Furthermore, this sensitivity increases with age apart from one FA specimen. The sensitivity trends for binder content variations are not well defined; however, they generally decrease with age. W/b ratios and paste contents therefore need to be kept as low as possible in concrete mixes. CCI sensitivity to changes in w/b ratio decreases in the following order: PC > FA > GGBS. The sensitivity to changes in binder content generally decreased as follows: GGBS > PC FA. The extent to which a change in w/b ratio and binder content affects CCI generally decreases with age. These findings reiterated the need to control the paste volume. Adopting the highest replacement levels of GGBS leads to the lowest chloride conductivity. However, these concrete mixes exhibit the highest sensitivity to changes in paste content
MT 2019
Livros sobre o assunto "Binder blends"
Carli, Linda L. Social Influence and Gender. Editado por Stephen G. Harkins, Kipling D. Williams e Jerry Burger. Oxford University Press, 2015. http://dx.doi.org/10.1093/oxfordhb/9780199859870.013.16.
Texto completo da fonteCapítulos de livros sobre o assunto "Binder blends"
Forton, A., Salvatore Mangiafico, Cédric Sauzéat, Hervé Di Benedetto e Paul Marc. "Estimation of Complex Shear Modulus of Binder Blends Produced with RAP Binder and Rejuvenator". In RILEM Bookseries, 725–31. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-46455-4_92.
Texto completo da fonteHamaguchi, Maki, Noriyuki Okuyama, Takahiro Shishido, Koji Sakai, Nobuyuki Komatsu, Naoki Kikuchi, Toshinori Inoue, Jiro Koide e Hideki Kasahara. "Prebaked Anode from Coal Extract (3) — Carbonization Properties of Hypercoal and Its Blends with Binder Pitch". In Light Metals 2012, 1219–21. Cham: Springer International Publishing, 2012. http://dx.doi.org/10.1007/978-3-319-48179-1_210.
Texto completo da fonteHamaguchi, Maki, Noriyuki Okuyama, Takahiro Shishido, Koji Sakai, Nobuyuki Komatsu, Naoki Kikuchi, Toshinori Inoue, Jiro Koide e Hideki Kasahara. "Prebaked Anode from Coal Extract (3) - Carbonization Properties of Hypercoal and its Blends with Binder Pitch". In Light Metals 2012, 1219–21. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118359259.ch210.
Texto completo da fonteBucher, R., M. Cyr e G. Escadeillas. "Carbonation of Blended Binders Containing Metakaolin". In RILEM Bookseries, 27–33. Dordrecht: Springer Netherlands, 2015. http://dx.doi.org/10.1007/978-94-017-9939-3_4.
Texto completo da fonteProvis, John L., e Susan A. Bernal. "Binder Chemistry – Blended Systems and Intermediate Ca Content". In Alkali Activated Materials, 125–44. Dordrecht: Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-7672-2_5.
Texto completo da fonteMuhammad Fauzi, Nurshamimie, Mohd Fadzil Arshad, Ramadhansyah Putra Jaya, Mazidah Mukri, Sajjad Ali Mangi e Warid Wazien Ahmad Zailani. "Setting Time of Treated Sludge Containing Blended Binder". In Springer Proceedings in Physics, 563–71. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9267-4_56.
Texto completo da fonteHou, Jinlong, Xiaojun LÜ, Hongliang Zhang, Yanqing Lai e Jie Li. "Furan Resin and Pitch Blends as Binders for TiB2-C Cathodes". In Light Metals 2011, 1117–21. Cham: Springer International Publishing, 2011. http://dx.doi.org/10.1007/978-3-319-48160-9_189.
Texto completo da fonteHou, Jinlong, Xiaojun Lü, Hongliang Zhang, Yanqing Lai e Jie Li. "Furan Resin and Pitch Blends as Binders for TiB2-C Cathodes". In Light Metals 2011, 1117–21. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118061992.ch189.
Texto completo da fonteDuan, W., Y. Zhuge e Y. Liu. "Effect of Blending Alum Sludge and Ground Granulated Blast-Furnace Slag as Cement Replacement to Mitigate Alkali-Silica Reaction". In Lecture Notes in Civil Engineering, 93–102. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3330-3_12.
Texto completo da fonteWang, Di, Augusto Cannone Falchetto, Martin Hugener, Laurent Porot, Atsushi Kawakami, Bernhard Hofko, Andrea Grilli et al. "Effect of Aging on the Rheological Properties of Blends of Virgin and Rejuvenated RA Binders". In RILEM Bookseries, 3–10. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-46455-4_1.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Binder blends"
Justnes, Harald, Tobias Danner e Mehrdad Torabzadegan. "Effect of Calcium Nitrate on the Performance of Slag Blended Cement". In Non-Traditional Cement and Concrete 2023 conference. Switzerland: Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-fenfc4.
Texto completo da fonteV., Aswani, Shobha Elizabeth Thomas e Ramaswamy K. P. "Effect of Admixtures in Blast Furnace Slag-fly Ash Based Alkali-activated Paste". In 6th International Conference on Modeling and Simulation in Civil Engineering. AIJR Publisher, 2023. http://dx.doi.org/10.21467/proceedings.156.29.
Texto completo da fonteRahman, A. S. M. Asifur, e Rafiqul A. Tarefder. "Effect of Fineness Modulus and Uniformity Coefficient on the Complex Modulus Function of Asphalt Concrete". In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-72268.
Texto completo da fonteBaginda, Muhammad Sultan, Basuki Wirjosentono, Tamrin, Amir Hamzah Siregar e Diana Adnanda Nasution. "Efficiency of maleic anhydride-modified polystyrene/natural rubber blends as sand aggregate binder". In 3RD INTERNATIONAL POSTGRADUATE CONFERENCE ON MATERIALS, MINERALS & POLYMER (MAMIP) 2019. AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0015717.
Texto completo da fonteLin, Liulan, Qingxi Hu, Li Zhao e Minglun Fang. "Influence of Microstructure on the Binder Ratio of B-TCP Tissue Scaffolds Using Selective Laser Sintering". In 2007 First International Conference on Integration and Commercialization of Micro and Nanosystems. ASMEDC, 2007. http://dx.doi.org/10.1115/mnc2007-21093.
Texto completo da fonte"Hydration of MgO/hydromagnesite Blends". In SP-349: 11th ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete. American Concrete Institute, 2021. http://dx.doi.org/10.14359/51732735.
Texto completo da fonte"High-Performance Concrete Using Blended and Triple Blended Binders". In "SP-149: High-Performance Concrete - Proceedings, International Conference Singapore, 1994". American Concrete Institute, 1994. http://dx.doi.org/10.14359/4078.
Texto completo da fonteGiandomenico, Manuel, Filippo Edoardo Capasso, Sokol Muca, Maria Carolina Gaetani, Sara Iafrate, Marco Bartolini, Ulderico Santamaria, Angela Calia, Emilia Vasanelli e Davide Melica. "RETOUCHING MURAL PAINTINGS IN HYPOGEUM: PRELIMINARY STUDY AND FIRST RESULTS". In RECH6 - 6th International Meeting on Retouching of Cultural Heritage. València: Editorial Universitat Politècnica de València, 2021. http://dx.doi.org/10.4995/rech6.2021.13533.
Texto completo da fonteFerdaus, Rashida, Khairil Azman Masri, Ramadhansyah Putra Jaya e Shoaib Md Shahnewaz. "Rheological and Mechanical Properties of Hot Mix Asphalt Incorporating Polypropylene and Polyethylene Fibers". In World Sustainable Construction Conference Series 2022. Switzerland: Trans Tech Publications Ltd, 2023. http://dx.doi.org/10.4028/p-sl037b.
Texto completo da fonte"Sulfate Resistance of Ternary Blend Concretes: Influence of Binder Composition on Performance". In SP-317: Sulfate Attack on Concrete: A Holistic Perspective. American Concrete Institute, 2017. http://dx.doi.org/10.14359/51700841.
Texto completo da fonteRelatórios de organizações sobre o assunto "Binder blends"
MacPhee, T. Coprocessing residues as binder additives to coking coal blends. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1993. http://dx.doi.org/10.4095/304584.
Texto completo da fonteMacPhee, T. Coprocessing consortium - year 3 progress report: project f 5 coprocessing residues as binder additives to coking coal blends. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1992. http://dx.doi.org/10.4095/304549.
Texto completo da fonteLomboy, Gilson, Douglas Cleary, Seth Wagner, Yusef Mehta, Danielle Kennedy, Benjamin Watts, Peter Bly e Jared Oren. Long-term performance of sustainable pavements using ternary blended concrete with recycled aggregates. Engineer Research and Development Center (U.S.), maio de 2021. http://dx.doi.org/10.21079/11681/40780.
Texto completo da fonteSinghvi, Punit, Javier García Mainieri, Hasan Ozer e Brajendra Sharma. Rheology-Chemical Based Procedure to Evaluate Additives/Modifiers Used in Asphalt Binders for Performance Enhancements: Phase 2. Illinois Center for Transportation, junho de 2021. http://dx.doi.org/10.36501/0197-9191/21-020.
Texto completo da fonteOhlsson, O. Results of combustion and emissions testing when co-firing blends of binder-enhanced densified refuse-derived fuel (b-dRDF) pellets and coal in a 440 MW{sub e} cyclone fired combustor. Volume 3: Appendices. Office of Scientific and Technical Information (OSTI), julho de 1994. http://dx.doi.org/10.2172/10180124.
Texto completo da fonteOhlsson, O. Results of combustion and emissions testing when co-firing blends of binder-enhanced densified refuse-derived fuel (b-dRDF) pellets and coal in a 440 MW{sub e} cyclone fired combustor. Volume 1: Test methodology and results. Office of Scientific and Technical Information (OSTI), julho de 1994. http://dx.doi.org/10.2172/10180121.
Texto completo da fonteOhlsson, O. Results of combustion and emissions testing when co-firing blends of binder-enhanced densified refuse-derived fuel (b-dRDF) pellets and coal in a 440 MW{sub e} cyclone fired combustor. Volume 2: Field data and laboratory analysis. Office of Scientific and Technical Information (OSTI), julho de 1994. http://dx.doi.org/10.2172/10180119.
Texto completo da fonte