Literatura científica selecionada sobre o tema "Axial-bending coupling"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Axial-bending coupling".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Axial-bending coupling"
Al-Janabi, Musab Aied Qissab. "Exact Stiffness Matrix for Nonprismatic Beams with Parabolic Varying Depth". Journal of Engineering 19, n.º 10 (5 de junho de 2023): 1212–25. http://dx.doi.org/10.31026/j.eng.2013.10.02.
Texto completo da fonteBerger, Se´bastien, Olivier Bonneau e Jean Fre^ne. "Influence of Axial Thrust Bearing on the Dynamic Behavior of an Elastic Shaft: Coupling Between the Axial Dynamic Behavior and the Bending Vibrations of a Flexible Shaft". Journal of Vibration and Acoustics 123, n.º 2 (1 de novembro de 2000): 145–49. http://dx.doi.org/10.1115/1.1355243.
Texto completo da fonteZhao, Guowei, e Zhigang Wu. "Effects of steady-state axial deformation on bending frequency of rotating cantilever beam". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, n.º 24 (19 de setembro de 2016): 4521–27. http://dx.doi.org/10.1177/0954406216669534.
Texto completo da fonteMacArthur, Sandra L., Matthew D. Johnson e Daniel D. Lewis. "Biomechanical Comparison of Two Conical Coupling Plate Constructs for Cat Tibial Fracture Stabilization". Veterinary and Comparative Orthopaedics and Traumatology 33, n.º 04 (21 de abril de 2020): 252–57. http://dx.doi.org/10.1055/s-0040-1708497.
Texto completo da fonteChen, Wen Yuan. "Analysis of Dynamic Characteristics of Pile-Soil Coupling Effect in Consideration of Large Span Cable-Stayed Bridge". Applied Mechanics and Materials 501-504 (janeiro de 2014): 1270–73. http://dx.doi.org/10.4028/www.scientific.net/amm.501-504.1270.
Texto completo da fonteCui, Zhiming, Zihe Liang e Jaehyung Ju. "A non-centrosymmetric square lattice with an axial–bending coupling". Materials & Design 216 (abril de 2022): 110532. http://dx.doi.org/10.1016/j.matdes.2022.110532.
Texto completo da fonteLei, Dun Cai, e Jin Yuan Tang. "The Design Method of V-Tooth Coupling". Advanced Materials Research 871 (dezembro de 2013): 347–51. http://dx.doi.org/10.4028/www.scientific.net/amr.871.347.
Texto completo da fonteBaisden, Jamie L., Brian D. Stemper, David Barnes, Narayan Yognandan e Frank A. Pintar. "Normative Lumbar Spine Coupling Relationships between Axial Rotation and Lateral Bending". Spine Journal 10, n.º 9 (setembro de 2010): S124. http://dx.doi.org/10.1016/j.spinee.2010.07.324.
Texto completo da fonteWang, Chen, Hamed Haddad Khodaparast, Michael Ian Friswell e Alexander David Shaw. "An equivalent model of corrugated panels with axial and bending coupling". Computers & Structures 183 (abril de 2017): 61–72. http://dx.doi.org/10.1016/j.compstruc.2017.01.008.
Texto completo da fonteSenouci, M., D. FitzPatrick, J. F. Quinlan, H. Mullett, L. Coffey e D. McCormack. "Quantification of the coupled motion that occurs with axial rotation and lateral bending of the head-neck complex: An experimental examination". Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 221, n.º 8 (1 de agosto de 2007): 913–19. http://dx.doi.org/10.1243/09544119jeim265.
Texto completo da fonteTeses / dissertações sobre o assunto "Axial-bending coupling"
Koutoati, Kouami. "Modélisation numérique du comportement statique et vibratoire des poutres sandwich viscoélastiques à gradient de propriétés". Electronic Thesis or Diss., Université de Lorraine, 2020. http://www.theses.fr/2020LORR0290.
Texto completo da fonteThis thesis proposes a numerical tool for the static and dynamic study of viscoelastic structures made of Functionally Graded Materials (FGM) for vibration control by passive damping. The objective is to make available to engineers a generic code based on the finite element approach for sizing calculations on FGM sandwich beam with viscoelastic core for applications requiring lightness and good thermal and mechanical resistance such as aerospace, automotive and nuclear. To reach this objective we first proposed a numerical model for the static and free vibration study of FGM sandwich beams with elastic behavior. This finite element model is implemented in the Matlab code environment. Using this code, we compare different beam theories for different geometric properties and boundary conditions. Thus, the limit of the classical beam theory in the study of short structures is highlighted. Also with this numerical model, the study of axial-bending and axial-rotation coupling is possible. From this, it is shown that FGM structures are very sensitive to spatial coupling and warping effects because of the non-symmetrical distribution of the material in their cross sections. In the proposed code, the resolution of the vibration problem is possible using classical eigenvalue and eigenvector problem solving methods. Then to introduce passive damping in the FGM sandwich structure, we proposed a sandwich beam model with FGM materials faces and viscoelastic materials core. This model is also implemented in the Matlab language and proposed as a generic tool. The interest of this numerical tool lies in its ability to compute the modal properties as well as the behavior of the viscoelastic FGM sandwich beam while taking into account the frequency dependence of the viscoelastic behavior, the boundary conditions and the axial-bending and axial-rotation coupling specific to FGM materials. The free vibration problem is non-linear in this case due to the material non-linearity induced by the soft layer. In the proposed code, the resolution of this problem is possible thanks to the coupling of the homotopy technical, the asymptotic numerical method and the automatic differentiation. Through this work, the contribution of FGM materials in the improvement of the damping power of structures is highlighted. In the continuation of the work, we propose a finite element formulation to compute the amplitude of forced vibrations of viscoelastic FGM sandwich structures. The resolution of the forced vibration problem is possible by using the bandwidths method. A study on the contribution of FGM materials in the reduction of vibration amplitudes is carried out for different viscoelastic laws. It is proved in this study that by a direct control of the composition gradient of FGM materials it is possible to optimize the damping power of structures even for low frequency modes for which classical composite materials have a damping power requiring improvement
Trabalhos de conferências sobre o assunto "Axial-bending coupling"
Walton, James F., C. P. Roger Ku e Jorgen W. Lund. "An Experimental Investigation of the Dynamic Characteristics of an Axial Spline Coupling in High-Speed Rotating Machinery". In ASME 1993 Design Technical Conferences. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/detc1993-0201.
Texto completo da fonteGhoneim, H., e D. J. Lawrie. "Dynamic Analysis of a Hyperbolic Composite Coupling". In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-79558.
Texto completo da fonteKhulief, Y. A., S. Bashmal e F. A. Al-Sulaiman. "Coupled Torsional Vibrations in Drilling Systems". In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80489.
Texto completo da fonteKu, C. P. Roger, James F. Walton e Jorgen W. Lund. "A Theoretical Approach to Determine Angular Stiffness and Damping Coefficients of an Axial Spline Coupling in High-Speed Rotating Machinery". In ASME 1993 Design Technical Conferences. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/detc1993-0199.
Texto completo da fonteGopalakrishnan, Shibu, e Gopinath Dhandapani. "Single Layered Cable Under Constrained Bending: Development of New Mathematical Model and Validation". In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67854.
Texto completo da fonteQu, Xiaoqi, Yougang Tang, Zhen Gao, Yan Li e Liqin Liu. "An Analytical Model of Floating Offshore Wind Turbine Blades Considering Bending-Torsion Coupling Effect". In ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/omae2018-78571.
Texto completo da fonteMargasahayam, R. N., e H. S. Faust. "Composite Drive Shaft Coupling for Future Rotorcraft: A 3D Finite-Element Analysis". In ASME 1988 Design Technology Conferences. American Society of Mechanical Engineers, 1988. http://dx.doi.org/10.1115/detc1988-0044.
Texto completo da fonteGarci´a-Vallejo, Daniel, Hiroyuki Sugiyama e Ahmed A. Shabana. "Finite Element Analysis of the Geometric Stiffening Effect Using the Absolute Nodal Coordinate Formulation". In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-84061.
Texto completo da fonteSingh, Manander, e Suhail Ahmad. "Local Stress Analysis of Composite Production Riser Under Random Sea". In ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/omae2014-23983.
Texto completo da fonteZhang, Zian, Zuolin Liu, Suyi Li e Hongbin Fang. "Multi-Mode Deformation of Origami Spring: Theoretical Modeling and Experimental Verification". In ASME 2022 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/detc2022-90408.
Texto completo da fonte