Bibliografias temáticas / Arcelor Mittal

Índice

  1. Artigos de revistas
  2. Livros
  3. Capítulos de livros
  4. Trabalhos de conferências

Literatura científica selecionada sobre o tema "Arcelor Mittal"

Autor: Grafiati
Publicado: 25 de julho de 2024
Última modificação: 31 de julho de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Arcelor Mittal".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Arcelor Mittal"

1

Volynets, Lyudmyla. "Ukrainische Gewerkschaften in ausländischen Unternehmen: Arcelor Mittal und Lactalis". Ukraine-Analysen, n.º 47 (11 de novembro de 2008): 13–16. http://dx.doi.org/10.31205/ua.047.02.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Raggi, Pascal. "Un demi-siècle de désindustrialisation en Lorraine du fer (1963-2013)". Cinquante ans de désindustrialisation, n.º 1 (1 de janeiro de 2019): 87–103. http://dx.doi.org/10.57086/rrs.82.

Texto completo da fonte
Resumo:
Cette contribution porte, d’une part, sur une région française emblématique du développement industriel de la fin du xixe siècle et des trois premiers quarts du suivant – la Lorraine – et, d’autre part, sur deux secteurs de production non moins emblématiques du processus d’industrialisation : l’extraction du minerai de fer ainsi que la sidérurgie. Elle aborde la période 1963-2013, des grandes grèves de mineurs jusqu’aux problèmes récents du groupe sidérurgique Arcelor- Mittal à Florange-Hayange.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Zaibet, Nour addin, e Dallel Hattab. "Analysis and Evaluation of Financial Performance Using inancial Indicators An Applied Study at Arcelor Mittal Annaba, 2014)-Algeria (2013". Milev Journal of Research and Studies 4, n.º 1 (30 de junho de 2018): 193–210. http://dx.doi.org/10.58205/mjrs.v4i1.1215.

Texto completo da fonte
Resumo:
The research aims to demonstrate the importance of analyzing andevaluating the financial performance of Arcelor Mittal Steel Annaba, basedon the financial indicators to analyze the financial performance, includingthe liquidity ratios, financial balance indicators, and cost indicators. Weused the analytical descriptive method to suit the research topic and theresults obtained. The financial indicators have shown that the financialposition of the institution is short term in the short term. The mainrecommendations of the research are the need to control the costs of alltypes.
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Luiz-Corrêa, W., H. Silva-Furtado e J. R. De Oliveira. "Development for the production of low phosphorus steel in operations at Arcelor Mittal Tubarão". Revista de Metalurgia 49, n.º 2 (30 de abril de 2013): 85–91. http://dx.doi.org/10.3989/revmetalm.1140.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Meyers, Marc. "Luxembourg Transposes Takeover Directive Against the Backdrop of Mittal Steel’s Bid for Arcelor". European Company Law 3, Issue 6 (1 de dezembro de 2006): 261–64. http://dx.doi.org/10.54648/eucl2006067.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Romanelli, João P., Maria C. P. Gonçalves, Mayara F. Costa e Ana M. M. L. Carvalho. "Effect of Genetic Material and Rotation on the Properties of Charcoal". Ciência e Natura 40 (7 de dezembro de 2018): 71. http://dx.doi.org/10.5902/2179460x32401.

Texto completo da fonte
Resumo:
This study aimed to evaluate chemical properties and yield of charcoal from two Eucalyptus urophylla clones considering the first and second rotation of the wood. The study was carried out with material from Arcelor Mittal Jequitinhonha, with a mean age of 61.5 months. The values of fixed carbon, volatile materials, ash content, higher calorific value, gravimetric yield, liquid yield and gas yield were determined. The data were analyzed statistically by Analysis of Variance (ANOVA) and significant differences were compared by the Tukey test (p <0.05). The results showed significant differences for the fixed carbon contents (67% and 70.5%) and volatile materials (32% and 29%) of clones AEC 0182 and AEC 0296, respectively. The analysis of the results showed that both the first and second rotation woods have satisfactory characteristics for charcoal production and are not influenced by the effect of the rotations.
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Falkus, J., e K. Miłkowska-Piszczek. "Strategy of Cooling Parameters Selection in the Continuous Casting of Steel". Archives of Metallurgy and Materials 61, n.º 1 (1 de março de 2016): 329–34. http://dx.doi.org/10.1515/amm-2016-0061.

Texto completo da fonte
Resumo:
This paper presents a strategy of the cooling parameters selection in the process of continuous steel casting. Industrial tests were performed at a slab casting machine at the Arcelor Mittal Poland Unit in Krakow. The tests covered 55 heats for 7 various steel grades. Based on the existing casting technology a numerical model of the continuous steel casting process was formulated. The numerical calculations were performed for three casting speeds - 0.6, 0.8 and 1 m min-1. An algorithm was presented that allows us to compute the values of the heat transfer coefficients for the secondary cooling zone. The correctness of the cooling parameter strategy was evaluated by inspecting the shell thickness, the length of the liquid core and the strand surface temperature. The ProCAST software package was used to construct the numerical model of continuous casting of steel.
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

David, J., Z. Jančíiková, R. Frischer e M. Vrožina. "Crystallizer’s Desks Surface Diagnostics with Usage of Robotic System". Archives of Metallurgy and Materials 58, n.º 3 (1 de setembro de 2013): 907–10. http://dx.doi.org/10.2478/amm-2013-0098.

Texto completo da fonte
Resumo:
Abstract Discussed problems are solved in Arcelor Mittal Ostrava a.s. company. VSB-TU Ostrava has its share on this solution in the frame of grant project TIP. The project has several goals, which relate with primary cooling system area in CSCD (Continuous Steel Casting Device). One target is concerned about surface quality of crystallizer’s desks, also from point of view of its quality evaluation.in terms of project solution was solved a crystallizer’s desks defects catalogue and methodology of their evaluation. Also was made methodology for quality evaluation of narrow crystallizer’s desks, which are dismantled in maintenance area. There were proposed a laser scanning of the crystallizer’s desks surface with usage of Laser sensor. In cooperation with DASFOS CZ, s.r.o. was proposed new method of inner crystallizer’s chamber measuring. In this paper are presented partial results of this solution, including first results from prototyped measuring device.
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Alexandru, Petrica, e Bogdan Gabriel Carp. "Determination of Correlation Between Composition, Rolling Parameters and Mechanical Characteristics of the Hot Rolled Steels". Materiale Plastice 56, n.º 1 (30 de março de 2019): 224–27. http://dx.doi.org/10.37358/mp.19.1.5156.

Texto completo da fonte
Resumo:
The controlled lamination of thick sheets involves the use of algorithms for choosing the rolling parameters: the initial heating temperature, the lamination scheme (the distribution of the total thickness reduction on each rolling cage, the number of passes through each cage and the distribution of the thickness reduction on each passage, intermediate cooling - cooling time and speed), and the temperature of the product obtained at the end of the rolling. The complexity of the phenomena, which occur during the hot plastic deformation process and which must be sufficiently well mastered in order to obtain reproducibly the technical specifications imposed on the products with different destinations, is the justification for this work. The data provided by Arcelor-Mittal Galati was used to obtain the mathematical model. Equations that correlate the main mechanical characteristics with the chemical composition of the steel and the parameters of the hot rolling pattern used are presented.
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Sroka, Włodzimierz. "Alliance Networks: the Case of Multinational Corporations". Organizacija 43, n.º 4 (1 de julho de 2010): 165–72. http://dx.doi.org/10.2478/v10051-010-0016-z.

Texto completo da fonte
Resumo:
Alliance Networks: the Case of Multinational CorporationsThe article deals with the problems of cooperation in network organizations. The structure of the text is divided into a couple of parts. Firstly, the increasing importance of alliance networks is described. Secondly, the concept of alliance networks as well as the essence of multinational corporations are presented. Beside theoretical deliberations, two practical cases are presented in the text too. First case relates to the Toyota keiretsu and the second one describes the network organization of the largest steel manufacturer in the world, i.e. ArcelorMittal Group. Last part of the text is the comparative analysis of the multinational corporations network vs. networks of small and medium size companies. The similarities as well as differences between both forms were presented. The article is based on the latest world literature devoted to the cooperative strategies as well as the practical business experience of the author from the work in Arcelor Mittal Poland and polish machine industry.
Estilos ABNT, Harvard, Vancouver, APA, etc.
Mais fontes

Livros sobre o assunto "Arcelor Mittal"

1

Bordonneau, Clarisse. Métallurgie en Lozère: 90 ans de savoir-faire : ArcelorMittal à Saint-Chély-d'Apcher (1917-2007). Sète: Presses du Languedoc, 2007.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Value effects surrounding Arcelor-Mittal merger announcements: Idiosyncratic factors explaining abnormal returns of competitors stocks. GRIN Verlag GmbH, 2010.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Gulcan, Ender. Cultural Analysis of the Merger of Arcelor and Mittal Steel with the Help of Hofstede's Cultural Dimensions. GRIN Verlag GmbH, 2017.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Izmeni︠a︡i︠a︡ budushchee: (k 60-letii︠u︡ prokatnogo departamenta PAO "Arselor Mittal Krivoĭ Rog" 1956-2016 g.). g. Krivoĭ Rog: Izdatelʹ Cherni︠a︡vskiĭ D.A., 2016.

Encontre o texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Capítulos de livros sobre o assunto "Arcelor Mittal"

1

Kumar, B. Rajesh. "Arcelor–Mittal Merger". In Wealth Creation in the World’s Largest Mergers and Acquisitions, 355–59. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-02363-8_45.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Praveen, Roopa, Dilip Aher e Nilesh Anute. "An Audacious Acquisition". In Indian Business Case Studies Volume V, 95—C13.P115. Oxford University PressOxford, 2022. http://dx.doi.org/10.1093/oso/9780192869418.003.0013.

Texto completo da fonte
Resumo:
Abstract A very intriguing case of mergers and acquisitions especially when the takeover is hostile and audacious. Mergers and acquisitions are major strategies for the inorganic growth of any organization, this stands true even for Mittal steel, the then world No. 1. The takeover of Arcelor Steels Luxemburg was considered to be audacious by the world around. Mr L.N. Mittal launched the formal offer but Arcelor ridiculed the offer to an ordinary ‘cologne’ compared to the ‘perfume that Arcelor was’. This case gets into the depth of the thoughts and decisions of both the parties, the stakeholders, and the people around. It also looks in to the details of how mergers and acquisitions work and executed, as well as the purpose behind it. All in all a case that must be analysed by all management students.
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Halff, Gregor. "The Arcelor and Mittal Steel Merger Negotiations". In Negotiation Excellence, 351–58. WORLD SCIENTIFIC, 2014. http://dx.doi.org/10.1142/9789814556958_0020.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Halff, Gregor. "The Arcelor and Mittal Steel Merger Negotiations". In Negotiation Excellence, 341–48. WORLD SCIENTIFIC, 2011. http://dx.doi.org/10.1142/9789814343176_0019.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Maharaj, D., e A. Mwasha. "Assessment of the use of Arcelor Mittal electric are furnace slag as coarse aggregates in concrete production". In Concrete Repair, Rehabilitation and Retrofitting IV, 86. CRC Press, 2015. http://dx.doi.org/10.1201/b18972-54.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Christ, Bruna Machado, Stefanie Lievore Cruz e Warley Teixeira Guimarães. "ANÁLISE DE VIABILIDADE TÉCNICA PARA A IMPLEMENTAÇÃO DE UM SISTEMA DE GERAÇÃO DE ENERGIA SOLAR FOTOVOLTAICA NO CENTRO DE EDUCAÇÃO AMBIENTAL DA ARCELOR MITTAL TUBARÃO". In A Importância da Energia Solar para o Desenvolvimento Sustentável, 10–22. Atena Editora, 2019. http://dx.doi.org/10.22533/at.ed.0031903092.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Arcelor Mittal"

1

Grabowski, Rene. "OPTIMIZED LOGISTICS FOR SLAB STORAGE AT ARCELOR MITTAL IN GERMANY". In 19º Seminário de Automação & TI. São Paulo: Editora Blucher, 2017. http://dx.doi.org/10.5151/2237-0234-26216.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
2

Henriques, Bruno Rodrigues, e Reinaldo Moreira De Paoli. "NOVA ESTAÇÃO DE DESGASEIFICAÇÃO RH NA ARCELOR MITTAL TUBARÃO: INOVAÇÕES E RESULTADOS DE PERFORMANCE". In 39º Seminário de Aciaria - Internacional. São Paulo: Editora Blucher, 2008. http://dx.doi.org/10.5151/2594-5300-0065.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
3

Frade, Celso Gabriel, Celso Lúcio Coura, Geraldo Alves Torres, Gesner Lima Coelho, Leandro Aparecido Marchi, Expedito Felício Barros Alves, Helder José Andrade e Paulo Renato de Castro Possa. "LAMINAÇÃO DE FIO MÁQUINA NA BITOLA 4,75 mm NO LAMINADOR 1 ARCELOR MITTAL - MONLEVADE". In 46º Seminário de Laminação, Processos e Produtos Laminados e Reviestidos. São Paulo: Editora Blucher, 2009. http://dx.doi.org/10.5151/2594-5297-15749.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
4

Pereira, Ideraldo Aparecido de Castro, José Ferreira da Silva Neto, Igor Barros Mairinck, Ari Magno Vieira e Kilder Neves. "DETECÇÃO DE FALHAS EM MOTORES TRIFÁSICOS COM TECNOLOGIA MCM NA ARCELOR-MITTAL INÓX BRASIL". In 64º Congresso Anual da ABM. São Paulo: Editora Blucher, 2009. http://dx.doi.org/10.5151/2594-5327-15346.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
5

Jeong, David Y., Pawel B. Woelke, Herman F. Nied, John N. DuPont, Sena Kizildemir, Fred B. Fletcher e John W. Hutchinson. "Defect Growth Characterization in Modern Rail Steels". In 2019 Joint Rail Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/jrc2019-1265.

Texto completo da fonte
Resumo:
The Federal Railroad Administration (FRA) has been sponsoring research on rail integrity for several decades. This research has been chiefly managed and conducted by the Volpe National Transportation Systems Center (Volpe). Particular focus has been given in this research to rail head defects, known as detail fractures, since they are the most commonly encountered defect in continuous welded rail track [1]. Testing and analyses have been performed on railroad rails manufactured without head hardening. Modern rail, however, are now heat treated during the manufacturing process to harden the rail surface to increase its resistance to wear. As such, the heat treatment and nonuniform cooling induce complex residual stress patterns in the rail that can affect microstructure and fatigue crack growth rate behavior. This paper will describe research to examine defect growth behavior of modern rail steels. This research is a collaboration among several organizations: Thornton-Tomasetti, Arcelor-Mittal, Lehigh University, Harvard University, National Institute of Standards and Technology (NIST), Fraunhofer Institute, and Volpe. Arcelor Mittal donated rails with different grades of steel: advanced head hardened, head hardened, and standard strength (i.e. non-head-hardened). Lehigh conducted laboratory tests on specimens cut from these rails to perform various tests, which include: hardness measurements, mechanical testing to measure tensile properties, fracture toughness measurements, and fatigue crack growth rate tests. All of these tests were performed in accordance with applicable ASTM International standards. NIST and Fraunhofer performed preliminary neutron diffraction measurements of residual stresses on the different rails. Moreover, this paper will present results from the laboratory testing program. Implications of these results on detail fracture growth behavior will also be discussed.
Estilos ABNT, Harvard, Vancouver, APA, etc.
6

Dummer, Fabio, Josiane Lira Batista, Graciely Koepp e Juliana Mendes. "ENVIO DIRETO DE PELOTAS USINA 8 (VALE) PARA ABASTECIMENTO DE ALTO FORNOS NA ARCELOR MITTAL TUBARÃO". In 5º Simpósio Brasileiro de Aglomeração de Minérios. São Paulo: Editora Blucher, 2017. http://dx.doi.org/10.5151/2594-357x-30972.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
7

Fialho, Marcelo Macedo, José Carlos de Pontes Junior, Octávio Alves Junior, Mario Henrique Monteiro Oncken e Santiago Ruiz Barrios. "MEDIÇÃO CONTÍNUA DE TEMPERATURA DO AÇO NO DISTRIBUIDOR: UTILIZAÇÃO DO SISTEMA CASTEMP NA ARCELOR MITTAL TUBARÃO". In 43º Seminário de Aciaria - Internacional. São Paulo: Editora Blucher, 2012. http://dx.doi.org/10.5151/2594-5300-20867.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
8

Martins, Charles de Abreu, Vanessa Gomes Santana, Júlio Cezar Bellon e Leonardo Barbosa Godefroid. "AVALIAÇÃO DO DESEMPENHO EM FADIGA DE AÇOS PARA APLICAÇÃO EM RODAS AUTOMOTIVAS NA ARCELOR MITTAL TUBARÃO". In 63º Congresso Anual da ABM. São Paulo: Editora Blucher, 2008. http://dx.doi.org/10.5151/2594-5327-0117.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
9

Arama, Iulian Nicusor, Marian Gaiceanu e Florin Grosu. "Reduction of the Distributed Electric Energy - A Challenge for the Distribution Operators Case Study - Arcelor Mittal Galati". In 2018 International Symposium on Fundamentals of Electrical Engineering (ISFEE). IEEE, 2018. http://dx.doi.org/10.1109/isfee.2018.8742457.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
10

Maia, Breno Totti, Bruno Orlando de Almeida Santos, Fabricio Silveira Garajau, Hugo Leonardo de Freitas, Jose Geraldo Torres, Marcelo de Souza Lima Guerra e Rudolf Ruebner. "MODELAGEM NUMÉRICA DO ESCOAMENTO NO INTERIOR DO SISTEMA DE DESPOEIRAMENTO PRIMÁRIO DO CONVERTEDOR DA ARCELOR MITTAL JOÃO MONLEVADE". In 43º Seminário de Aciaria - Internacional. São Paulo: Editora Blucher, 2012. http://dx.doi.org/10.5151/2594-5300-20753.

Texto completo da fonte
Estilos ABNT, Harvard, Vancouver, APA, etc.
Você também pode estar interessado nas extensas listas de trabalhos sobre o assunto "Arcelor Mittal":
Artigos de revistas
Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!

Vá para a bibliografia