Literatura científica selecionada sobre o tema "Applications orthodontiques"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Applications orthodontiques".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Applications orthodontiques"
Cacciafesta, Vittorio, Gudrun Luebberink e Daniel Kanter. "Traitement orthodontique des adultes avec un parodonte réduit : principes biomécaniques et applications cliniques". L'Orthodontie Française 82, n.º 4 (23 de novembro de 2011): 321–29. http://dx.doi.org/10.1051/orthodfr/2011135.
Texto completo da fonteMakaremi, Masrour, e Pierre Bouletreau. "L’intelligence artificielle au service des protocoles orthodontico-chirurgicaux". Revue d'Orthopédie Dento-Faciale 55, n.º 1 (fevereiro de 2021): 89–104. http://dx.doi.org/10.1051/odf/2021007.
Texto completo da fonteMuller, Christine. "Exposition des incisives mandibulaires chez le senior : applications orthodontiques". Revue d'Orthopédie Dento-Faciale 47, n.º 1 (janeiro de 2013): 29–39. http://dx.doi.org/10.1051/odf/2013103.
Texto completo da fonteLavergne, Patrick, Christiane Lodter, Robert Piquet e Erik Estivalezes. "La photopolymérisation des composites orthodontiques : considérations théoriques et applications cliniques". Revue d'Orthopédie Dento-Faciale 38, n.º 2 (junho de 2004): 161–74. http://dx.doi.org/10.1051/odf/2004017.
Texto completo da fonteWilmes, Benedict, Manuel Nienkemper, Mathilde Mazaud-Schmelter, Stephane Renger e Dieter Drescher. "Utilisation combinée du Beneslider et d’appareils multi-bagues linguaux, mécaniques et procédure clinique". L'Orthodontie Française 84, n.º 4 (27 de novembro de 2013): 347–59. http://dx.doi.org/10.1051/orthodfr/2013065.
Texto completo da fonteKuhlberg, Andrew J., e Ravindra Nanda. "Applications des concepts biomécaniques à la clinique orthodontique". Revue d'Orthopédie Dento-Faciale 28, n.º 3 (setembro de 1994): 325–34. http://dx.doi.org/10.1051/odf/1994018.
Texto completo da fonteMessaoudi, Yassine, Jean-Loup Coudert e Jean-Jacques Aknin. "Apport de la reconstruction tridimensionnelle à l’aide du logiciel 3DNEO® dans le traitement chirurgico-orthodontique des dents incluses". L'Orthodontie Française 84, n.º 2 (30 de maio de 2013): 147–55. http://dx.doi.org/10.1051/orthodfr/2012028.
Texto completo da fonteGlez, Dominique, Solenn Hourdin e Olivier Sorel. "Laser Er:YAG en parodontologie et implication dans le plan de traitement orthodontique". L'Orthodontie Française 81, n.º 1 (março de 2010): 19–26. http://dx.doi.org/10.1051/orthodfr/2010005.
Texto completo da fonteAugereau, Dominique. "Détermination du profil de risque parodontal individuel en vue d’un traitement orthodontique et ses conséquences thérapeutiques : application à trois cas cliniques". Revue d'Orthopédie Dento-Faciale 43, n.º 3 (setembro de 2009): 351–59. http://dx.doi.org/10.1051/odf/2009039.
Texto completo da fonteKharmanda, Ghias, Mohamed Yaser Kharma e Abdelkhalak El Hami. "Intégration du concept de la fiabilité en conception des prothèses orthodontiques : Application sur les systèmes de fixation par mini-plaques utilisées dans les mandibules fracturées". Incertitudes et fiabilité des systèmes multiphysiques 17, n.º 1 (fevereiro de 2017). http://dx.doi.org/10.21494/iste.op.2017.0129.
Texto completo da fonteTeses / dissertações sobre o assunto "Applications orthodontiques"
Lavernhe, Patrick. "La photopolymérisation en application orthodontique". Toulouse 3, 2007. http://www.theses.fr/2007TOU30013.
Texto completo da fonteTwo photopolymerization processes (halogen and LED), two cement types for orthodontic bonding – a composite one : Transbond XT and a CVI hybrid one: Fuji ortho LC II – are assessed; cements are photopolymerised between 20 and 40 s with a halogen lamp and for 5 10 15, 20 or 40 s with a LED lamp. Studying the cement joint is by hardness, thermic measures and traction/ Shearing trials. Increasing photopolymerisation time improves hardness results and bonding resistance whatever the type of lamp, except for CVI, for which beyond 15 s, results go decreasing. Photopolymerisation increases tooth temperature by 2°C and with a halogen lamp, bracket temperature is increased by + 20°C. LED lamps are quite satisfactory. CVI has an easy clinical use, it reinforces resistance to carious lesions, mustn't be photopolymerised for more than 15 s and remains short of the adhesive performances of composites
Ulff, Nicolas. "Analyse et prise en compte des effets de l’hydrogène sur le comportement thermomécanique des AMF à base NiTi". Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0308.
Texto completo da fonteAdvances in the many fields that form medicine have many origins, one of them being the evolution of the materials used. In particular, the rise of the intelligent materials enables to consider new technical solutions, or to significantly improve existing devices. Shape memory alloys belong to this family of intelligent materials, due to their temperature dependent behavior. Their mechanical behavior is therefore more complex compared to more well-known materials such as steels. This allows, for example, to achieve a level of reversible deformation of the order of several percent. One of the first applications of these materials concerns the field of orthodontics, with the development of orthodontic wire in NiTi shape memory alloy. Its interest is to take advantage of the application of an almost constant force during the treatment. One problem with which dentists are confronted is due to the presence of hydrogen which leads to premature rupture and degradation of NiTi wires mechanical properties during orthodontic treatments. The brittle nature of the rupture is an indication of the multi-physical origin of this issue. This PhD proposal will focus on the analysis of these hydrogen effects on the thermomechanical behavior of Shape Memory Alloys (SMAs) in order to develop a finite element model. For that end, experimental characterizations will be carried out and analysis of obtained results will allow to formulate an adapted coupled chemo-thermo-mechanical constitutive model. This behavior model will be integrated in two special finite elements (2D and 3D) with coupled degrees of freedom (thermal, mechanical and chemical degrees of freedom). These elements will be implemented in the Abaqus code via the subroutine UEL. The obtained numerical tool will allow to analyze the effect of hydrogen diffusion on the performance of SMA-based orthodontic arches. These finite element predictions will be confronted with experimental observations
Garcia, Robert. "Analyse architecturale informatisee de la face en norma lateralis : application aux protocoles chirurgico-orthodontiques". Paris 7, 1989. http://www.theses.fr/1989PA07GA02.
Texto completo da fonteEl-Nabbout, Fidele. "L'apport du scanner 3D en anatomie dentaire : résultats et applications aux calculs d'ancrage et à la mécanique orthodontique". Toulouse 3, 2007. http://thesesups.ups-tlse.fr/225/.
Texto completo da fonteThe present study is an update on anchorage values in orthodontics and their impact on treatment options. The chosen sample included 120 subjects. 3D tomodensitometry using C2000-Cepha and Cepha 3DT software, calculated tooth anatomy parameters such as root volume which can serve as a basis for defining anchorage in orthodontics. According to this selection, the software C2000 achieves a reconstruction; it permits the determination of essential parameters in the survey of teeth and their role in the therapeutic attitude choice in orthodontics: - Anchorage values of a tooth and groups of teeth, - 3D localization of resistance centers groups. The individual anatomical data for each dental and groups of teeth enlighten certain therapeutic options. The reference values were calculated and compared with those available in the literature. They challenge a number of current approaches in orthodontic treatment, and it sometimes misleads us to a more prudent therapeutic attitude. The use of these group gravity centers in practice, find an immediate clinical application in counts of conventional mechanics and in counts of mechanics relying on the absolute anchorages, means the mini-screws
El-Nabbout, Fidele Baron Pascal Faure Jacques. "L'apport du scanner 3D en anatomie dentaire résultats et applications aux calculs d'ancrage et à la mécanique orthodontique /". Toulouse (Université Paul Sabatier, Toulouse 3), 2008. http://thesesups.ups-tlse.fr/225.
Texto completo da fonte