Bibliografias temáticas / Amf. smat

Índice

Artigos de revistas
Teses / dissertações
Livros
Capítulos de livros
Trabalhos de conferências
Relatórios de organizações

Literatura científica selecionada sobre o tema "Amf. smat"

Autor: Grafiati

Publicado: 19 de outubro de 2024

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Amf. smat".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Artigos de revistas sobre o assunto "Amf. smat"

Alam, Mohammad Zahangeer, e Malancha Dey (Roy). "The reduction of abiotic stress in food crops through climate-smart mycorrhiza-enriched biofertilizer". AIMS Microbiology 10, n.º 3 (2024): 674–93. http://dx.doi.org/10.3934/microbiol.2024031.

Texto completo da fonte

Resumo:

<p>Climate change enhances stress in food crops. Recently, abiotic stress such as metalloid toxicity, salinity, and drought have increased in food crops. Mycorrhizal fungi can accumulate several nutrients within their hyphae through a symbiotic relationship and release them to cells in the root of the food crops under stress conditions. We have studied arbuscular mycorrhizal fungi (AMF)-enriched biofertilizers as a climate-smart technology option to increase safe and healthy food production under abiotic stress. AMF such as <italic>Glomus sp</italic>., <italic>Rhizophagus sp</italic>., <italic>Acaulospora morrowiae</italic>, <italic>Paraglomus occultum</italic>, <italic>Funneliformis mosseae</italic>, and <italic>Claroideoglomus etunicatum</italic> enhance growth and yield in food crops grown in soils under abiotic stress. AMF also works as a bioremediation material in food crops grown in soil. More precisely, the arsenic concentrations in grains decrease by 57% with AMF application. In addition, AMF increases mineral contents, and antioxidant activities under drought and salinity stress in food crops. Catalase (CAT) and ascorbate peroxidase (APX) increased by 45% and 70% in AMF-treated plants under drought stress. AMF-enriched biofertilizers are used in crop fields like precision agriculture to reduce the demand for chemical fertilizers. Subsequently, AMF-enriched climate-smart biofertilizers increase nutritional quality by reducing abiotic stress in food crops grown in soils. Consequently, a climate resilience environment might be developed using AMF-enriched biofertilizers for sustainable livelihood.</p>

Estilos ABNT, Harvard, Vancouver, APA, etc.

Krasuski, Krzysztof, Wojciech Krajewski e Tomasz Błażejczyk. "Influence of contacts’ orientation on the AMF distribution in inter-contact gaps of VCBs". IET Science, Measurement & Technology 13, n.º 3 (1 de maio de 2019): 346–53. http://dx.doi.org/10.1049/iet-smt.2018.5269.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zamay, Tatiana, Sergey Zamay, Natalia Luzan, Victoriya Fedotovskaya, Albert Masyugin, Fyodor Zelenov, Anastasia Koshmanova et al. "Magnetic Nanoscalpel for the Effective Treatment of Ascites Tumors". Journal of Functional Biomaterials 14, n.º 4 (24 de março de 2023): 179. http://dx.doi.org/10.3390/jfb14040179.

Texto completo da fonte

Resumo:

One of the promising novel methods for radical tumor resection at a single-cell level is magneto-mechanical microsurgery (MMM) with magnetic nano- or microdisks modified with cancer-recognizing molecules. A low-frequency alternating magnetic field (AMF) remotely drives and controls the procedure. Here, we present characterization and application of magnetic nanodisks (MNDs) as a surgical instrument (“smart nanoscalpel”) at a single-cell level. MNDs with a quasi-dipole three-layer structure (Au/Ni/Au) and DNA aptamer AS42 (AS42-MNDs) on the surface converted magnetic moment into mechanical and destroyed tumor cells. The effectiveness of MMM was analyzed on Ehrlich ascites carcinoma (EAC) cells in vitro and in vivo using sine and square-shaped AMF with frequencies from 1 to 50 Hz with 0.1 to 1 duty-cycle parameters. MMM with the “Nanoscalpel” in a sine-shaped 20 Hz AMF, a rectangular-shaped 10 Hz AMF, and a 0.5 duty cycle was the most effective. A sine-shaped field caused apoptosis, whereas a rectangular-shaped field caused necrosis. Four sessions of MMM with AS42-MNDs significantly reduced the number of cells in the tumor. In contrast, ascites tumors continued to grow in groups of mice and mice treated with MNDs with nonspecific oligonucleotide NO-MND. Thus, applying a “smart nanoscalpel” is practical for the microsurgery of malignant neoplasms.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Gao, Qin, Wensheng Xie, Yu Wang, Dan Wang, Zhenhu Guo, Fei Gao, Lingyun Zhao e Qiang Cai. "A theranostic nanocomposite system based on radial mesoporous silica hybridized with Fe3O4 nanoparticles for targeted magnetic field responsive chemotherapy of breast cancer". RSC Advances 8, n.º 8 (2018): 4321–28. http://dx.doi.org/10.1039/c7ra12446e.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Cimpoeşu, Nicanor, Adela Ioana Ursanu, Sergiu Stanciu, Ramona Cimpoeşu, Boris Constantin, Ciprian Paraschiv e Silviu Octavian Gurlui. "Preliminary Results of Copper Based Shape Memory Alloys Analyze Used for MEMS Applications". Applied Mechanics and Materials 371 (agosto de 2013): 368–72. http://dx.doi.org/10.4028/www.scientific.net/amm.371.368.

Texto completo da fonte

Resumo:

Shape memory alloys (SMAs) are commonly used in micro-electro-mechanical systems (MEMS). Having the unique shape memory, super-elastic affects and now damping capacity SMAs have become an important smart material for a broad range of engineering applications in last years. Copper based SMAs are promising alloys, based on the obtaining price and good characteristic properties. Shape memory alloys as thin films are used for fast actuation in applications due to their high surface to volume ratio comparing to bulk SMAs. In this paper two shape memory alloys based on copper, proposed as targets in different deposition processes to obtain MEMS and with different chemical composition, are analyzed through scanning electrons microscope (SEM), XRD and EDAX considerations after water quenching and recovery heat treatments. The martensite variants are dimensioned and 3D aspects are also analyzed for both metallic materials. The metallic phases obtained after heat treatment are determined and compare in both thermal influenced cases.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Irfan, Muhammad, Suzanne Martin, Muhannad Ahmed Obeidi, Scott Miller, Frank Kuster, Dermot Brabazon e Izabela Naydenova. "A Magnetic Nanoparticle-Doped Photopolymer for Holographic Recording". Polymers 14, n.º 9 (30 de abril de 2022): 1858. http://dx.doi.org/10.3390/polym14091858.

Texto completo da fonte

Resumo:

Functionalised holograms are important for applications utilising smart diffractive optical elements for light redirection, shaping and in the development of sensors/indicators. This paper reports on holographic recording in novel magnetic nanocomposites and the observed temperature change in dry layers and liquid samples exposed to alternating magnetic field (AMF). The nanocomposite consists of N-isopropylacrylamide (NIPA)-based polymer doped with magnetic nanoparticles (MNPs), and local heating is achieved through magnetic induction. Here, volume transmission holographic gratings (VTHGs) are recorded with up to 24% diffraction efficiency (DE) in the dry layers of magnetic nanocomposites. The dry layers and liquid samples are then exposed to AMF. Efficient heating was observed in the liquid samples doped with Fe3O4 MNPs of 20 nm average size where the temperature increased from 27 °C to 64 °C after 300 s exposure to 111 mT AMF. The temperature increase in the dry layers doped with the same nanoparticles after exposure to 4.4 mT AMF was observed to be 6 °C. No temperature change was observed in the undoped layers. Additionally, we have successfully recorded Denisyuk holograms in the magnetic nanocomposite materials. The results reveal that the magnetic nanocomposite layers are suitable for recording holograms and need further optimisation in developing holographic indicators for mapping AMFs.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kameoka, Hiromu, Taro Maeda, Nao Okuma e Masayoshi Kawaguchi. "Structure-Specific Regulation of Nutrient Transport and Metabolism in Arbuscular Mycorrhizal Fungi". Plant and Cell Physiology 60, n.º 10 (26 de junho de 2019): 2272–81. http://dx.doi.org/10.1093/pcp/pcz122.

Texto completo da fonte

Resumo:

Abstract Arbuscular mycorrhizal fungi (AMF) establish symbiotic relationships with most land plants, mainly for the purpose of nutrient exchange. Many studies have revealed the regulation of processes in AMF, such as nutrient absorption from soil, metabolism and exchange with host plants, and the genes involved. However, the spatial regulation of the genes within the structures comprising each developmental stage is not well understood. Here, we demonstrate the structure-specific transcriptome of the model AMF species, Rhizophagus irregularis. We performed an ultra-low input RNA-seq analysis, SMART-seq2, comparing five extraradical structures, germ tubes, runner hyphae, branched absorbing structures (BAS), immature spores and mature spores. In addition, we reanalyzed the recently reported RNA-seq data comparing intraradical mycelium and arbuscule. Our analyses captured the distinct features of each structure and revealed the structure-specific expression patterns of genes related to nutrient transport and metabolism. Of note, the transcriptional profiles suggest distinct functions of BAS in nutrient absorption. These findings provide a comprehensive dataset to advance our understanding of the transcriptional dynamics of fungal nutrition in this symbiotic system.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Wang, Zhong Xiao, e Jing Sun. "Application Research of Stadiums Smart Lighting System Based on ZigBee". Applied Mechanics and Materials 182-183 (junho de 2012): 1281–86. http://dx.doi.org/10.4028/www.scientific.net/amm.182-183.1281.

Texto completo da fonte

Resumo:

This lighting system is a versatile remote control for stadiums smart lighting application. This paper describes the design of a high-brightness LED system, which demonstrates wireless communication using Freescale’s MC13213 device, high-brightness LED dimming control using Freescale’s MM908E625 and the 3-axis acceleration sensor MMA7260QT from Freescale. Advantages of using LED lighting are a long operating life, no fragile glass, no mercury, and low-voltage DC operation. In the system, each wireless part communicates over the RF medium using the freely available software stack SMAC from Freescale. At last , the paper analysis the dimming and itensity of the smart lighting system.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ziegler, Richard, Shaista Ilyas, Sanjay Mathur, Gerardo Goya e Jesús Fuentes-García. "Remote-Controlled Activation of the Release through Drug-Loaded Magnetic Electrospun Fibers". Fibers 12, n.º 6 (3 de junho de 2024): 48. http://dx.doi.org/10.3390/fib12060048.

Texto completo da fonte

Resumo:

The integration of magnetic nanoparticles within fibrillar structures represents an interesting avenue for the remotely controlled release of therapeutic agents. This work presents a novel drug release platform based on electrospun magnetic fibers (EMFs) combining drugs, magnetic nanoparticles (MNPs) and mesoporous silica nanoparticles (MSNs) for controlled drug delivery via alternating magnetic fields (AMF). The platform was demonstrated to be versatile and effective for hydrophilic ketorolac (KET) and hydrophobic curcumin (CUR) encapsulation and the major response observed for AMF-triggered release was reached using drug-loaded MSNs within the fibers, providing fine control over drug release patterns. The EMFs exhibited excellent inductive heating capabilities, showing a temperature increase of ∆T up to 8 °C within a 5 min AMF pulse. The system is shown to be promising for applications like transdermal pain management, oncological drug delivery, tissue engineering, and wound healing, enabling precise control over drug release in both spatial and temporal dimensions. The findings of this study offer valuable insights into the development of the next generation of smart drug delivery systems, based in multifunctional materials that can be remotely regulated and potentially revolutionize the field of nanomedicine.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kortelainen, Tiina, Hilkka Siljander-Rasi, Mikko Tuori e Kirsi Partanen. "Mustasotilaskärpäsen toukkajauhon (Hermetia illucens) aminohappojen sulavuus porsailla". Suomen Maataloustieteellisen Seuran Tiedote, n.º 33 (31 de janeiro de 2016): 1–7. http://dx.doi.org/10.33354/smst.75174.

Texto completo da fonte

Resumo:

ICOPP -tutkimushankkeessa tehdyn kokeen tavoitteena oli määrittää luonnonmukaisesti tuotetun, EU:ssa sioille toistaiseksi kielletyn eläinperäisen rehuaineen, mustasotilaskärpäsen (Hermetia illucens) toukista valmistetun jauhon, aminohappojen standardoitu ohutsuolisulavuus porsailla. Jauhot oli tuotettu FiBL -luomututkimuslaitoksessa Sveitsissä. Kokeessa oli kaksi hiilihydraattipohjaisella alustalla kasvatettua toukkaerää, joista ensimmäisessä rasva oli erotettu mekaanisesti, toisessa heksaaniuutolla. Koe-eläiminä oli 40 risteytysporsasta (alkupaino 17 kg) pariruokinnalla. Koeruokintoja oli viisi: 1) vähäproteiininen rehu aminohappojen endogeenisen perustason erityksen määritystä varten, 2) rehu, jossa oli erän 1 toukkajauhoa 10,2 %, 3) rehu, jossa oli erän 1 toukkajauhoa 20,4 %, 4) rehu, jossa oli erän 2 toukkajauhoa 9,3 % ja 5) rehu, jossa oli erän 2 toukkajauhoa 18,6 % rehun kuiva-aineessa (KA). Ryhmien 2‒5 rehuissa oli lisäksi heravalkuaisjauhetta 22,9 % rehun KA:ssa. Kokeen lopussa siat lopetettiin aminohappojen ohutsuolisulavuuden määrittämistä varten. Erän 1 toukkajauho sisälsi 629 g raakavalkuaista, 185 g raakarasvaa, 318 g NDF ja 51 g tuhkaa/kg KA. Vastaavat arvot toisen erän toukkajauholle olivat 705 g, 90 g, 287 ja 53 g/kg KA. Hyönteisten sisältämä kuitu on selluloosaa muistuttavaa kitiiniä ja siihen sitoutuneen typen (ADF-N) käyttökelpoisuus on huono. Kokeen toukkajauhojen kokonaistypestä noin 12 % oli ADF-typpeä. Erän 1 toukkajauhossa oli 31,7 g lysiiniä, 24,3 g treoniinia, 12,0 g metioniinia, 3,5 g kystiiniä ja 39,6 g/kg KA valiinia. Vastaavat arvot toisen erän toukkajauholle olivat 37,8 g, 27,4 g, 14,1 g, 3,7 g ja 44,2 g/kg KA. Toukkaerä, toukkajauhon lisäystaso tai porsaiden sukupuoli eivät vaikuttaneet koedieettien aminohappojen näennäiseen ohutsuolisulavuuteen (AID). Mekaanisesti erotetun toukkajauhon (erä 1) standardoidut (SID) aminohappojen ohutsuolisulavuudet olivat suurempia verrattuna heksaaniuutettuun toukkajauhoon (erä 2). Välttämättömien aminohappojen SID oli ensimmäisessä toukkajauhoerässä 81,3 ‒ 94,8 % ja toisessa toukkajauhoerässä 64,0 – 81,8 %. Lysiinin standardoitu ohutsuolisulavuus oli ensimmäisessä toukkajauhoerässä 81,3 %, metioniinin 90,7 %, kystiinin 49,8 %, treoniinin 82,5 % ja valiinin 92,9 %. Vastaavat sulavuudet toisessa toukkajauhoerässä olivat 77,2 %, 81,8 %, -10,8 %, 64,0 % ja 73,6 %. Mustasotilaskärpäsen toukkien käyttö valkuaisrehuna edellyttää rasvan erottamista, koska toukat sisältävät noin 380 g raakarasvaa/kg ka. Mekaaninen rasvan erotus on aminohappojen sulavuudelle edullisempi kuin heksaaniuutto. Kitiiniin sitoutunut käyttökelvoton typpi on huomioitava ruokinnan suunnittelussa. Kalajauhoon verrattuna toukkajauhossa on vähemmän välttämättömiä aminohappoja ja niiden sulavuus on huonompi. Toukkajauhon tuotannon kannattavuutta tulisi selvittää.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Teses / dissertações sobre o assunto "Amf. smat"

Gasmi, Assia. "Effet de la nanostructuration sur le comportement thermomécanique du Nitinol". Electronic Thesis or Diss., Université de Montpellier (2022-....), 2024. http://www.theses.fr/2024UMONS018.

Texto completo da fonte

Resumo:

La présente thèse s’intéresse à l'alliage à mémoire de forme NiTi, en se concentrant sur l'influence du procédé de nanostructuration superficielle SMAT sur son comportement thermomécanique. À travers quatre chapitres distincts, elle rappelle les principales caractéristiques des alliages à mémoire de forme (AMF), mettant en avant les propriétés exceptionnelles de l'alliage NiTi, et explorant le traitement de nanocristallisation superficielle (SMAT). La caractérisation microstructurale est ensuite approfondie, notamment en étudiant les effets du traitement thermique de recuit et du SMAT sur la transition de phase. Le troisième chapitre se concentre sur les méthodes d'analyse thermomécanique adaptées au NiTi, en examinant les essais de traction et de nanoindentation. Enfin, le quatrième chapitre analyse la caractérisation thermomécanique de l'alliage avant et après le traitement SMAT, mettant en évidence les implications de ces transformations sur son comportement global.La thèse contribue à la compréhension des effets du procédé SMAT sur l'alliage NiTi, révélant des liens entre la microstructure, les phases présentes et les propriétés mécaniques. Les résultats ouvrent des perspectives prometteuses pour la meilleure maîtrise des propriétés de l'alliage NiTi.Les résultats obtenus pour différents traitements SMAT montrent que ce procédé modifie la réponse mécanique du matériau. Elle a aussi une influence sur son état initial, comme l’illustrent les différences dans les courbes de DSC. Les mesures cinématiques (champs de vitesses de déformation) et calorimétriques (champ de source de chaleur) indiquent aussi l’apparition de différences notables dans les réponses en fonction des paramètres de traitement SMAT. L'exploration du comportement lors de cycles de charge/décharge montre une réponse qui se stabiliser après quelques cycles. Les effets de couplage semblent être prépondérants par rapport aux effets dissipatifs. Ces observations devraient être étendues à des chargements en fatigue afin de mieux mettre en évidence les éventuels effets dissipatifs. De même, l’utilisation de modèles d’interprétation plus élaborés permettrait de mieux tenir compte des effets de structure et d’enrichir la compréhension de la relation entre le procédé et les évolutions des propriétés
This thesis focuses on the shape memory alloy NiTi, with a specific emphasis on the influence of the surface nanostructuring process SMAT on its thermomechanical behavior. Through four distinct chapters, it revisits the main characteristics of shape memory alloys (SMAs), highlighting the exceptional properties of the NiTi alloy and exploring the surface nanocrystallization treatment (SMAT). Microstructural characterization is then deeply investigated, particularly by studying the effects of annealing heat treatment and SMAT on phase transition. The third chapter focuses on thermomechanical analysis methods suitable for NiTi, examining tensile tests and nanoindentation. Finally, the fourth chapter analyzes the thermomechanical characterization of the alloy before and after SMAT treatment, highlighting the implications of these transformations on its overall behavior.This thesis contributes to understanding the effects of the SMAT process on the NiTi alloy, revealing links between microstructure, present phases, and mechanical properties. The results offer promising perspectives for better control of the properties of the NiTi alloy.The results obtained for different SMAT treatments show that this process modifies the mechanical response of the material. It also has an influence on its initial state, as illustrated by differences in DSC curves. Kinematic (strain rate fields) and calorimetric (heat source field) measurements also indicate notable differences in responses depending on SMAT processing parameters. Exploration of behavior during load/unload cycles shows a response that stabilizes after a few cycles. Coupling effects seem to be predominant compared to dissipative effects. These observations should be extended to fatigue loading to better highlight any dissipative effects. Similarly, the use of more elaborate interpretation models would allow better consideration of structural effects and enrich the understanding of the relationship between the process and property evolutions

Estilos ABNT, Harvard, Vancouver, APA, etc.

PERRUCCI, FRANCESCO. "High Performance & Smart Manufacturing". Doctoral thesis, Politecnico di Torino, 2018. http://hdl.handle.net/11583/2712640.

Texto completo da fonte

Resumo:

Additive Manufacturing can be considered as one of the key factors for sustainable economic growth, increasing competitiveness and innovative technology with the potential to transform global manufacturing industry, to influence the environmental impact and to change the European economies. In recent years, 3D printing has grown rapidly and has shown great potential in various application fields: from bioengineering, to microfluidics and electronics. There is a growing interest for 3D printing focused on the production of functional structures. The possibility to obtain functional elements by 3D printing, such as batteries, antennas, membranes, sensors etc. is one of the key points of the evolution of this technology. Research on new kinds of printable materials and the ability to control and predict their performance are essential to achieve broader use of 3-D printing. Engineered materials, specifically studied for being 3D printable and exhibiting optimized properties and multifunctionality, will provide intense potential and opportunities in a myriad of applications, resulting in better functionality of the manufactured device (e.g, biocompatibility, electrical conductivity, optical response, chemical sensitivity, mechanical behaviour...) coupled with improved printability. The main approaches in the evolution of 3D printable materials consist in working with multiple materials or nanocomposites to create new combinations that have unique properties expanding the range of 3D printable objects. This Ph.D research activity on High Performance & Smart Manufacturing has been held in Materials and Micro Systems Laboratory of Politecnico di Torino (ChiLab) and in collaboration with Microla Optoelectronics S.r.l. First, a study of Additive Manufacturing techniques, already on the market, was performed. Then the optimization of a stereolithographic printing machine was carried out. One part of the PhD research was based on the study of new smart materials, with intrinsic features that can give to the printed objects a concrete function. For this purpose, functionalized photosensitive polymers, realized by Politecnico di Torino, were used to build 3D structures. Also aromatic polymers were laser processed with the aim to make them conductive and, in the future, reliable for additive manufacturing processes. A further and important task during the PhD activity was the integration of stereolithographic processes both at micro and nanoscale. This important task was possible thanks to the fruitful collaboration with the Laser Zentrum of Hannover (LZH - Germany). At LZH laboratories, a two-photon polymerization (2PP) set-up allowed the fabrication of different nano-structures for microfluidic application. The first attempt was the fabrication of a nano-filter printed directly inside a micro-channel outlet as published in “3D printed suspended micro-filter integrated in a printed microfluidic channel”. This work, once established the process feasibility, may lead to an interesting application in Bioanalytics for the sieving of extracellular vesicles of endocytic origin.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Roberto, Miguel Augusto Inácio. "Smart & Simple Business Solutions (SSBS)". Master's thesis, NSBE - UNL, 2010. http://hdl.handle.net/10362/10319.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Colby, Edward Grellier. "A smart biosensor". Thesis, University of Cambridge, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.368100.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Akhlaq, Muhammad. "A Smart-Dashboard : Augmenting safe & smooth driving". Thesis, Blekinge Tekniska Högskola, Sektionen för datavetenskap och kommunikation, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-6162.

Texto completo da fonte

Resumo:

Annually, road accidents cause more than 1.2 million deaths, 50 million injuries, and US$ 518 billion of economic cost globally. About 90% of the accidents occur due to human errors such as bad awareness, distraction, drowsiness, low training, fatigue etc. These human errors can be minimized by using advanced driver assistance system (ADAS) which actively monitors the driving environment and alerts a driver to the forthcoming danger, for example adaptive cruise control, blind spot detection, parking assistance, forward collision warning, lane departure warning, driver drowsiness detection, and traffic sign recognition etc. Unfortunately, these systems are provided only with modern luxury cars because they are very expensive due to numerous sensors employed. Therefore, camera-based ADAS are being seen as an alternative because a camera has much lower cost, higher availability, can be used for multiple applications and ability to integrate with other systems. Aiming at developing a camera-based ADAS, we have performed an ethnographic study of drivers in order to find what information about the surroundings could be helpful for drivers to avoid accidents. Our study shows that information on speed, distance, relative position, direction, and size & type of the nearby vehicles & other objects would be useful for drivers, and sufficient for implementing most of the ADAS functions. After considering available technologies such as radar, sonar, lidar, GPS, and video-based analysis, we conclude that video-based analysis is the fittest technology that provides all the essential support required for implementing ADAS functions at very low cost. Finally, we have proposed a Smart-Dashboard system that puts technologies – such as camera, digital image processor, and thin display – into a smart system to offer all advanced driver assistance functions. A basic prototype, demonstrating three functions only, is implemented in order to show that a full-fledged camera-based ADAS can be implemented using MATLAB.
Phone# 00966-56-00-56-471

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zambrano, Némesis K. "KID smART & Any Given Child – New Orleans". ScholarWorks@UNO, 2016. http://scholarworks.uno.edu/aa_rpts/204.

Texto completo da fonte

Resumo:

This internship report is an overview of KID smART and the fiduciary responsibility it provides to the citywide arts education initiative Any Given Child - New Orleans (AGCNO). I began my 480-hour internship with KID smART in February 2015 to work on getting AGCNO off the ground. The following report combines on-site observational research, expertise I developed from my educational training, and independent research to provide an analysis of KID smART and AGCNO’s current position, strengths, weaknesses, opportunities, and threats. Additionally, this report provides recommendations on how to address specific issues with operational management in order for AGCNO to establish independence and sustainability.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Srivastava, Vikash Umeshchandra. "Smart Antennas & Power Management in Wireless Networks". Thesis, Virginia Tech, 2003. http://hdl.handle.net/10919/31244.

Texto completo da fonte

Resumo:

The proliferation of wireless ad-hoc networks especially wireless LAN (IEEE 802.11b Standard) in the commercial market in recent years has reached a critical mass. The adoption and strong support of wireless IEEE 802.11 standard, coupled with the consequent decline in costs, has made wireless LAN deployment as one of the fastest growth area in communication access technology. With the ever increasing use of wireless LAN technology the various networks are reaching their full capacity in terms of network throughput, number of users and interference level in the wireless channel. In this thesis work I propose to the use smart antenna technology and a power management scheme in the wireless ad-hoc networks to increase the network capacity in terms of throughput, number of simultaneous communication and to lower the average transmit power and consequently co-channel interference. Power management scheme can be used to maximize the power efficiency of the transmitter by choosing an optimum transmit power level. Smart antenna or adaptive antenna array technology has reached a level of sophistication that it is feasible to use it on small mobile terminals like handheld PDA, LAPTOP and other mobile devices with limited battery power. The simulation results of various ad â hoc network scenario shows that there are significant gains to be had if these technologies can be integrated in the existing wireless LAN physical layer and/or in the standard them self. Smart antennas along with slight modification in channel access scheme reduce co-channel interference dramatically and increases the number of simultaneous transmissions hence improves network throughput. Power management algorithm is shown to improve average transmission of a node. We present a mathematical framework to characterize the outage probability of cellular mobile radio system with selective co-channel interference receiver in overloaded array environments. The mathematical framework outlines a general numerical procedure for computing the probability of outage of a cellular mobile radio system that is equipped with a smart antenna to suppress a few strongest co-channel interferers (CCI) out of a total of NI active interferers by null steering.
Master of Science

Estilos ABNT, Harvard, Vancouver, APA, etc.

Abad, Zapata Rafael, Carpio David Dávila, Huayamares Andrea Miranda, Velezmoro Carmen Rincón e Ruiz Jackeline Torres. "Plan de negocios: 3S Smart Salon & SPA". Master's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2014. http://hdl.handle.net/10757/651687.

Texto completo da fonte

Resumo:

3S Smart Salón & Spa es un salón de belleza y spa dedicado al cuidado de las mujeres de 25 a 45 años del NSE AB que viven en Lima Moderna, poniendo a su disposición un ambiente armonioso con soluciones tecnológicas para mantener y mejorar la imagen personal de sus clientes y eliminar el estrés. 3S busca que la mujer sienta bienestar, descanso, cuidado de su cuerpo, rostro y cabello y que además pueda encontrar elementos electrónicos que puedan incrementar su experiencia de servicio con el respaldo de equipos modernos de alta tecnología y productos de calidad de las marcas más reconocidas del sector de salones de belleza y spa. La necesidad de este tipo de servicios surge debido a que la imagen se ha convertido en un factor decisivo en el mundo de hoy, tomando gran importancia tanto en el ámbito social como personal y laboral de las personas. Las mujeres buscan cada vez verse y sentirse bien. Esto alineado al constante avance tecnológico da como resultado el primer salón de belleza tecnológico del Perú, en el cual se minimiza el riesgo de un cambio de look pudiendo ver el resultado antes de realizarse un cambio irreversible, acompañado del ambiente tecnológico de la infraestructura y otros elementos que serán parte de la plataforma tecnológica del local. La fidelidad de las clientas y la atracción de nuevas, se captará a través de nuestro servicio diferenciado y constante actualización tecnológica, siendo consistentes en la calidad del servicio brindado con un staff altamente calificado, acompañado de un plan de marketing vía internet, redes sociales, medios y eventos.
Tesis

Estilos ABNT, Harvard, Vancouver, APA, etc.

Xavier, Mariana Sofia Rosa de Brito. "Smart Homes no mercado downstream de Oil & Gas". Master's thesis, FEUC, 2016. http://hdl.handle.net/10316/30736.

Texto completo da fonte

Resumo:

Relatório de estágio do mestrado em Economia (Economia Industrial), apresentado à Faculdade de Economia da Universidade de Coimbra, sob a orientação de Maria Rita Vieira Martins e Ricardo Clérigo.
O presente relatório insere-se no âmbito do estágio curricular integrado no Mestrado em Economia da Faculdade de Economia da Universidade de Coimbra, realizado no período de 1 de setembro a 7 de dezembro de 2015, na área de Smart Homes, Automatic Meter Reading (AMR) and Machine-to-Machine (M2M) platform da empresa ISA – Intelligent Sensing Anywhere, S.A.. O objetivo deste relatório consiste na apresentação das principais variáveis que influenciam a adoção de produtos Smart Homes nos distribuidores de gás, assim como, na identificação e análise das características relevantes para a definição do modelo de negócio conducente à colocação de uma nova gama de produtos da ISA no mercado global, tendo uma maior incidência nos mercados considerados estratégicos para a empresa, nomeadamente, EUA, Canadá e Europa. Desta análise conclui-se que novas tendências têm emergido no mercado de Gasóleo de Petróleo Liquefeito (GPL), tornando a fidelização de clientes um aspeto crítico para as utilities de Oil & Gas. Neste contexto, e como forma de inovar o seu portefólio, a ISA desenvolveu uma solução na área de Smart Homes para o mercado de Oil & Gas, com o intuito de se diferenciar face à concorrência. Elaborou-se um Business Model Canvas para o novo produto da ISA, tendo em consideração duas perspetivas (retenção e aquisição de clientes). O objetivo passou por estudar qual a melhor estratégia a ser utilizada pelos clientes da ISA para que estes consigam endereçar, de um modo diferenciador, o seu mercado residencial. Deste modo, a ISA tem a preocupação não só de servir o seu cliente, mas também de evidenciar o melhor modo de interação com o consumidor final. Este tipo de interação é designado por Business-to-Business-to-Consumer (B2B2C). Concluiu-se, a partir da análise dos dois Business Model Canvas, que a abordagem a ter relativamente à aquisição e retenção de clientes é muito semelhante, embora pareça preferível que as empresas optem por focar-se na retenção dos seus clientes, já que a aquisição de um novo cliente pode envolver um elevado custo.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Pettersson, William. "An Evaluation of IoT Protocol Efficiency and suitability : For smart vehicles, smart homes & industrial scenarios". Thesis, Mittuniversitetet, Institutionen för informationssystem och –teknologi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-42392.

Texto completo da fonte

Resumo:

Internet of things (IoT) är det överläggande området i denna rapport. IoT är ett väldigt intressant I nuläget och är snabbt växande. IoT kan beskrivas som ett nätverk av kommunicerande enheter som delar information och automatiserar eller försimplar uppgifter och därav ökar effektivitet och säkerhet. Området växer så pass fort att det förväntas vara 24 miljarder anslutna enheter vid år 2050, denna utökning leder i sin tur till ett ökat behov av förståelse för IoT protokollen som hanterar kommunikationen emellan enheterna. Detta för att kunna välja det mest optimala protokollet för ett givet scenario. Detta arbete kommer att välja ett lovande protokoll för undersökning samt evaluering gällande dess prestation berörande fördröjning, dataöverföringshastighet och skalbarhet. Protokollet som valdes var MQTT (Message Queuing Telemetry Transport). Baserat på dessa evaluerade värden föra en diskussion gällande protokollets lämplighet inom scenariona. Värdena kommer att tas fram via tidmätningar start till slut för kommunikationen samt tid för att skicka en mängd meddelanden, båda i respekt till antalet samtidigt kommunicerande program. Testen körs med en lokal PC som agerar Broker och en Raspberry Pi som kör samtliga programmen i individuella terminaler. Resultaten var att fördröjningen verkar ha en näst intill linjär relation och dataöverföringshastighet ett exponentiellt avtagande beteende i respekt till samtidigt kommunicerande enheter. Dem mätta resultaten analyseras och diskuteras, och kommer till slutsatsen att protokollet är en lämplig kandidat för de flesta scenarion, så som smarta bilar, smarta hem och till viss del industriell användning. Den största nackdelen med protokollet var dess höga standardavvikelse gällande individuella meddelandens fördröjning.
Internet of things (IoT) is the base topic of this thesis, and it is a rapidly growing area, it can be described as a network of communicating devices sharing information and streamlining tasks in addition to increasing efficiency and security. It is expected to be 24 billion connected devices by year 2050 and with this growth comes an increased demand on understanding the IoT protocols to be able to choose a suitable protocol for a given scenario. This thesis will discuss this area and pick one protocol to evaluate specifically regarding latency, throughput, and scalability. The protocol chosen were MQTT (Message Queuing Telemetry Transport). Based on these values then discuss whether the protocol is a suitable candidate for the scenarios. The data to evaluate this will be gathered by measuring the end-to-end time of the protocol in respect to the number of communicating programs, and to measure the time it takes to communicate a number of messages with respect to the number of programs handling the communication. These tests are performed with a local PC acting as the broker and a Raspberry pi running each of the communicating programs on individual terminals. The results were that latency seem to have a close to liner relation, and that throughput seem to have an exponentially decreasing relation with respect to number of clients cooperating. The measured results are analyzed and discussed and concluded that the protocol is a fitting candidate for most scenarios such as smart cars, smart homes and to some extent industry. The biggest flawed concluded was the protocols high standard deviation for individual messages latency. The outcome of the benchmarks measurement showed that increasing the number of nodes would not result in superior performance. It was noted that an optimal number of nodes was found to be between 1 and 20 for all the tests performed. The study showed that no load balancer could be considered a clear winner, instead, different configurations of load balancers performed varyingly well at different tests.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Livros sobre o assunto "Amf. smat"

Auer, Michael E., e Reinhard Langmann, eds. Smart Industry & Smart Education. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-95678-7.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Yang, J., P. S. Brandon e A. C. Sidwell, eds. Smart & Sustainable Built Environments. Oxford, UK: Blackwell Publishing Ltd, 2005. http://dx.doi.org/10.1002/9780470759493.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Al-Turjman, Fadi, ed. Smart Cities Performability, Cognition, & Security. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-14718-1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Auer, Michael E., e Thrasyvoulos Tsiatsos, eds. Smart Mobile Communication & Artificial Intelligence. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-56075-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Auer, Michael E., e Thrasyvoulos Tsiatsos, eds. Smart Mobile Communication & Artificial Intelligence. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-54327-2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Vizuete, Marcelo Zambrano, Miguel Botto-Tobar, Sonia Casillas, Carina Gonzalez, Carlos Sánchez, Gabriel Gomes e Benjamin Durakovic, eds. Innovation and Research – Smart Technologies & Systems. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-63434-5.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Banthia, Nemkumar, Salman Soleimani-Dashtaki e Sidney Mindess, eds. Smart & Sustainable Infrastructure: Building a Greener Tomorrow. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-53389-1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Serrhini, Mohammed, e Kamal Ghoumid, eds. Advances in Smart Medical, IoT & Artificial Intelligence. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-66850-0.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Serrhini, Mohammed, e Kamal Ghoumid, eds. Advances in Smart Medical, IoT & Artificial Intelligence. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-66854-8.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Mais fontes

Capítulos de livros sobre o assunto "Amf. smat"

Hutson, James, e Piper Hutson. "Inclusivity & Environment". In Inclusive Smart Museums, 85–125. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-43615-4_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Preto, Sandra, e Cristina Caramelo Gomes. "Three Times Smart – Smart Workplaces, Smart Lighting & Smart Glass". In Advances in Intelligent Systems and Computing, 435–46. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60525-8_45.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Saab, Patrice G., Sean Duran, Judith R. McCalla, Judy A. Brown e Lúcia E. Williams. "Heart Smart". In Museums & Social Issues, 258–63. New York: Routledge, 2021. http://dx.doi.org/10.4324/9781315421735-10.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Michéle, Benjamin. "Security & Privacy Implications". In Smart TV Security, 81–92. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-20994-4_4.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kersten, Peter. "Dimensionen, Einheiten & Lösungsstrategien". In Mechanik – smart gelöst, 61–82. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-53706-0_3.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Lux, Daniel, Bastian Inthasane, Christoph Rathfelder e Michael Westermeier. "Vision & Ausblick in die Zukunft". In Smart Homes, 289–95. München: Haufe, 2024. http://dx.doi.org/10.34157/978-3-648-17674-0_13.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dustdar, Schahram, Stefan Nastić e Ognjen Šćekić. "State Of The Art & Related Work". In Smart Cities, 21–26. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60030-7_2.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Dustdar, Schahram, Stefan Nastić e Ognjen Šćekić. "State of the Art & Related Work". In Smart Cities, 103–11. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60030-7_6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Small, Brenda Kay. "Terms, Communication, & Critical Resources". In Smart Kid Terminology, 1–10. New York: Routledge, 2022. http://dx.doi.org/10.4324/9781003257103-1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Langmann, Reinhard, e Matthias Coppenrath. "A Cloud-Based Blended Learning Lab for PLC Education". In Smart Industry & Smart Education, 3–13. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-95678-7_1.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Trabalhos de conferências sobre o assunto "Amf. smat"

Angrisano, Antonio, Luigi Ferrigno, Salvatore Gaglione, Gianfranco Miele e Keerthana Velusamy. "GNSS–Based Velocity Measurement for Smart Mobility Systems". In 2024 IEEE International Symposium on Measurements & Networking (M&N), 1–6. IEEE, 2024. http://dx.doi.org/10.1109/mn60932.2024.10615589.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Alamin, Khaled Sidahmed Sidahmed, Davide Appello, Alessandro Beghi, Nicola Dall'Ora, Fabio Depaoli, Santa Di Cataldo, Franco Fummi et al. "An AI-Enabled Framework for Smart Semiconductor Manufacturing". In 2024 Design, Automation & Test in Europe Conference & Exhibition (DATE), 1–6. IEEE, 2024. http://dx.doi.org/10.23919/date58400.2024.10546768.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ficara, Annamaria, Maria Fazio, Orazio Pellegrino, Alessia Ruggeri, Armando Ruggeri, Giuseppe Sollazzo e Gaetano Bosurgi. "Distributed Services for Pavement Anomaly Detection in Smart Roads". In 2024 IEEE International Symposium on Measurements & Networking (M&N), 1–6. IEEE, 2024. http://dx.doi.org/10.1109/mn60932.2024.10615337.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Zyrianoff, Ivan, Mattia Forlesi, Lorenzo Gigli, Soroosh Kamali, Nicola Testoni, Canio Mennuti, Giuseppe Augugliaro et al. "Digital Smart Structure: Engineering a Sensor-to-Cloud Structural Health Monitoring Pilot". In 2024 IEEE International Symposium on Measurements & Networking (M&N), 1–6. IEEE, 2024. http://dx.doi.org/10.1109/mn60932.2024.10615780.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Chen, Xiang (Frank), Peter F. Tortorelli, Michael L. Santella, Bruce A. Pint, Hong Wang, Philip J. Maziasz, Benjamin Sutton e Daniel Purdy. "Evaluation of the Mechanical Properties of Cast and Wrought CF8C-Plus Relevant to ASME Code Case Qualification". In AM-EPRI 2024, 123–34. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p0123.

Texto completo da fonte

Resumo:

Abstract The mechanical behavior of a cast form of an advanced austenitic stainless steel, CF8C-Plus, is compared with that of its wrought equivalent in terms of both tensile and creep-rupture properties and estimated allowable stress values for pressurized service at temperatures up to about 850°C. A traditional Larson-Miller parametric model is used to analyze the creep-rupture data and to predict long-term lifetimes for comparison of the two alloy types. The cast CF8C-Plus exhibited lower yield and tensile strengths, but higher creep strength compared to its wrought counterpart. Two welding methods, shielded-metal-arc welding (SMAW) and gas-metal-arc welding, met the weld qualification acceptance criteria in ASME BPVC Section IX for the cast CF8C-Plus. However, for the wrought CF8C-Plus, while SMAW and gas-tungsten-arc welding passed the tensile acceptance criteria, they failed the side bend tests due to lack of fusion or weld metal discontinuities.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Grasso, Christian, Luca Leonardi, Joannes Sam Mertens e Vincenza Torrisi. "Real-Time Communication and Digital Twin Modelling Towards Smart Mobility in the SAMOTHRACE Project". In 2024 IEEE International Symposium on Measurements & Networking (M&N), 1–6. IEEE, 2024. http://dx.doi.org/10.1109/mn60932.2024.10615865.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Bosurgi, Gaetano, Orazio Pellegrino, Giuseppe Sollazzo e Alessia Ruggeri. "Analysis of a Driver's Visual Behaviour and its Relationship with the Smart Road Context". In 2024 IEEE International Symposium on Measurements & Networking (M&N), 01–06. IEEE, 2024. http://dx.doi.org/10.1109/mn60932.2024.10615270.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Barbarino, Silvestro, Rosario Pecora, Leonardo Lecce, Antonio Concilio e Salvatore Ameduri. "Airfoil Morphing Architecture Based on Shape Memory Alloys". In ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2008. http://dx.doi.org/10.1115/smasis2008-480.

Texto completo da fonte

Resumo:

The adaptive structures concept is of great interest in the aeronautical field because of the several benefits which can be accomplished in the design of future aircraft. Improvements in terms of aerodynamic efficiency, aero-elastic behaviour and manoeuvrability were proved by many international studies. The development of new structural architectures implementing and integrating innovative materials is mandatory for succeeding in these critical tasks. The so-called Smart Structure idea is more and more taken into account in aerospace applications Among the family of Smart Materials, Shape Memory Alloys (SMAs) certainly represents a convenient solution for many static applications. In this work, an application for a morphing wing trailing edge is presented as alternative for conventional flap devices. A compliant rib structure has been designed, based on SMA components working both as actuators, controlling wing chamber, and as structural elements, sustaining external aerodynamic loads. Achievable performance has been estimated by a FE approach; SMA behaviour has been modelled through a dedicated routine implementing the Liang & Rogers’ model for evaluating the internal stress and the minimum temperature necessary for activation. The numerical results have been presented in terms of induced displacements and morphed shape.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Kaur, Sukhwinder, R. C. Gangwar e Gagandeep Singh Kahlon. "Secure & optimize hadoop scheduling using AMF-H3 framework with bat algorithm". In 2017 Conference on Emerging Devices and Smart Systems (ICEDSS). IEEE, 2017. http://dx.doi.org/10.1109/icedss.2017.8073700.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Ahmed, Aqeel, e Chuck Roy. "Achieving IT/OT integration with AMI, distribution automation & management solutions". In 2016 Saudi Arabia Smart Grid (SASG). IEEE, 2016. http://dx.doi.org/10.1109/sasg.2016.7849688.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Relatórios de organizações sobre o assunto "Amf. smat"

Arniella, Elio F. Evaluation of Smart Water Infrastructure Technologies (SWIT). Inter-American Development Bank, maio de 2017. http://dx.doi.org/10.18235/0006353.

Texto completo da fonte

Resumo:

The objective of this document is to present an assessment of the current situation in the application of Smart Water Infrastructure Technologies (SWIT) and to provide a summary of potential key recommendations for the integration of such technologies by water service providers in the Latin American and Caribbean region. Smart Water Infrastructure Technologies (SWIT) have the potential to contribute considerably to improved service delivery and efficiency. Those technologies include:Smart Metering (AMR/AMI), District Metered Areas (DMAs), Pressure Management, Active Leak Detection, Management Information Systems (MIS), Customer Relations Management Systems (CRM), Geographical Information Systems (GIS), Supervisory Control and Data Acquisition (SCADA), Hydraulic Modeling And are described in this document, which also presents: a case study of their application by the Barbados Water Authority; a survey of the level of implementation in representative water utilities of the Caribbean region, and recommendations derived from lessons learned.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Macharia, G., Macharia, G., Haßler, B. Haßler, B., Martin, A. Martin, A. e Omboto, C. Omboto, C. Inception Report - Digital Literacy (Smart Africa). Open Development & Education, janeiro de 2023. http://dx.doi.org/10.53832/opendeved.1015.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Winfield, Emilie. Climate-Smart Agriculture: Soil Health & Carbon Farming. U.S. Department of Agriculture, California Climate Hub, janeiro de 2020. http://dx.doi.org/10.32747/2020.7303347.ch.

Texto completo da fonte

Resumo:

This fact sheet is the first installment of a four-part climate smart agriculture series exploring the relationship between carbon farming, soil health, and soil amendments on CA croplands and rangelands. Subsequent fact sheets will address the benefits of compost, pulverized rock, and biochar as amendments. The series is intended for members of the technical assistance community who advice CA growers on climate smart agriculture.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Wilson, David G., e Marvin A. Cook. Smart Grid R&D SSM KIER FY17 Report. Office of Scientific and Technical Information (OSTI), dezembro de 2017. http://dx.doi.org/10.2172/1413416.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Farmer, J., e J. Choi. Smart Surfaces: New Coatings & Paints with Radiation Detection Functionality. Office of Scientific and Technical Information (OSTI), março de 2007. http://dx.doi.org/10.2172/902620.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Brice, Glenn J., Mani S. S. Venkata, Paul Kuntz, Sava Milovanovic, Eric Sortomme, Jinfeng Ren, Sarina Adhikari e Jesse Gantz. Integrated Smart Distribution RD&D Project Final Technical Report. Office of Scientific and Technical Information (OSTI), dezembro de 2017. http://dx.doi.org/10.2172/1460575.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Magne-Domgho, Lea, Julie Collins, John Ulimwengu e Ousmane Badiane. AKADEMIYA2063 Project Report, Nutrient Smart Processing & Trade (NSPT). No. 003. AKADEMIYA2063, setembro de 2023. http://dx.doi.org/10.54067/nspt.003.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Magne-Domgho, Lea, Julie Collins, John Ulimwengu e Ousmane Badiane. AKADEMIYA2063 Project Report Nutrient Smart Processing & Trade (NSPT). No. 001. AKADEMIYA2063, setembro de 2023. http://dx.doi.org/10.54067/nspt.001.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Magne-Domgho, Lea, Julie Collins, John Ulimwengu e Ousmane Badiane. AKADEMIYA2063 Project Report, Nutrient Smart Processing & Trade (NSPT), No. 002. AKADEMIYA2063, setembro de 2023. http://dx.doi.org/10.54067/nspt.002.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Magne-Domgho, Lea, Julie Collins, John Ulimwengu e Ousmane Badiane. AKADEMIYA2063 Project Report, Nutrient Smart Processing & Trade (NSPT). No. 003/FR. AKADEMIYA2063, setembro de 2023. http://dx.doi.org/10.54067/nspt.003/fr.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!