Literatura científica selecionada sobre o tema "Additive and Subtractive Manufacturing"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "Additive and Subtractive Manufacturing".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "Additive and Subtractive Manufacturing"
Liang, Steven Y., Yixuan Feng e Jinqiang Ning. "Predictive Manufacturing: Subtractive and Additive". IOP Conference Series: Materials Science and Engineering 842 (16 de junho de 2020): 012024. http://dx.doi.org/10.1088/1757-899x/842/1/012024.
Texto completo da fonteKunwar, Puskal, Zheng Xiong, Shannon Theresa Mcloughlin e Pranav Soman. "Oxygen-Permeable Films for Continuous Additive, Subtractive, and Hybrid Additive/Subtractive Manufacturing". 3D Printing and Additive Manufacturing 7, n.º 5 (1 de outubro de 2020): 216–21. http://dx.doi.org/10.1089/3dp.2019.0166.
Texto completo da fonteHarris, Ian D. "Additive Manufacturing: A Transformational Advanced Manufacturing Technology". AM&P Technical Articles 170, n.º 5 (1 de maio de 2012): 25–29. http://dx.doi.org/10.31399/asm.amp.2012-05.p025.
Texto completo da fonteSathish, K., S. Senthil Kumar, R. Thamil Magal, V. Selvaraj, V. Narasimharaj, R. Karthikeyan, G. Sabarinathan, Mohit Tiwari e Adamu Esubalew Kassa. "A Comparative Study on Subtractive Manufacturing and Additive Manufacturing". Advances in Materials Science and Engineering 2022 (15 de abril de 2022): 1–8. http://dx.doi.org/10.1155/2022/6892641.
Texto completo da fonteLiu, Jikai, e Albert C. To. "Topology optimization for hybrid additive-subtractive manufacturing". Structural and Multidisciplinary Optimization 55, n.º 4 (29 de agosto de 2016): 1281–99. http://dx.doi.org/10.1007/s00158-016-1565-4.
Texto completo da fonteStavropoulos, Panagiotis, Harry Bikas, Oliver Avram, Anna Valente e George Chryssolouris. "Hybrid subtractive–additive manufacturing processes for high value-added metal components". International Journal of Advanced Manufacturing Technology 111, n.º 3-4 (2 de outubro de 2020): 645–55. http://dx.doi.org/10.1007/s00170-020-06099-8.
Texto completo da fonteWu, Xuefeng, Chentao Su e Kaiyue Zhang. "316L Stainless Steel Thin-Walled Parts Hybrid-Layered Manufacturing Process Study". Materials 16, n.º 19 (30 de setembro de 2023): 6518. http://dx.doi.org/10.3390/ma16196518.
Texto completo da fonteShukalov, A. V., V. A. Dubakin e I. O. Zharinov. "Hybrid additive-subtractive methods in robot assisted manufacturing". Journal of Physics: Conference Series 1582 (julho de 2020): 012092. http://dx.doi.org/10.1088/1742-6596/1582/1/012092.
Texto completo da fonteTamellini, Lorenzo, Michele Chiumenti, Christian Altenhofen, Marco Attene, Oliver Barrowclough, Marco Livesu, Federico Marini, Massimiliano Martinelli e Vibeke Skytt. "Parametric Shape Optimization for Combined Additive–Subtractive Manufacturing". JOM 72, n.º 1 (31 de outubro de 2019): 448–57. http://dx.doi.org/10.1007/s11837-019-03886-x.
Texto completo da fonteNewman, Stephen T., Zicheng Zhu, Vimal Dhokia e Alborz Shokrani. "Process planning for additive and subtractive manufacturing technologies". CIRP Annals 64, n.º 1 (2015): 467–70. http://dx.doi.org/10.1016/j.cirp.2015.04.109.
Texto completo da fonteTeses / dissertações sobre o assunto "Additive and Subtractive Manufacturing"
Madeleine, Wedlund, e Bergman Jonathan. "Decision support model for selecting additive or subtractive manufacturing". Thesis, Högskolan i Gävle, Maskinteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-26996.
Texto completo da fonteAdditiv tillverkning (AM), eller 3D-printing, är en tillverkningsmetod där komponenter produceras genom att succesivt addera material till produkten lagervis, till skillnad från skärande bearbetning där material subtraheras från ett arbetsstycke. Det finns fördelar och nackdelar med respektive metod och det kan vara ett komplext problem att avgöra när den ena metoden är att föredra framför den andra. Syftet med denna studie är att utveckla en beslutstödjande modell (DSM) som hjälper användaren välja lämplig metod med avseende på produktionskostnader. Information inhämtas genom en litteraturstudie samt intervjuer med personer som arbetar med AM och skärande bearbetning. Modellen tar hänsyn till material, storlek, tider, geometrisk komplexitet, efterbearbetning och miljöeffekter. Den beslutstödjande modellen skapades i Microsoft Excel. Skillnaden i pris mellan respektive tillverkningsmetod beroende på antal och komplexitet jämfördes mot litteraturstudien. Modellen för AM verifieras med hjälp av kostnadskalkyler från Sandvik Additive Manufacturing. Felmarginalen är förhållandevis låg på cirka två till sex procent när spillmaterial inte tas hänsyn till. Tyvärr har modellen för skärande bearbetning inte verifieras på grund av en brist på data, vilket därför rekommenderas som fortsatt arbete. Slutsatsen är att AM inte kommer ersätta någon nuvarande tillverkningsmetod. Det är dock ett bra komplement till metallindustrin eftersom små, komplexa komponenter med få toleranskrav gynnas av AM. En undersökning över nuvarande tjänster relaterat till studien genomfördes med ambitionen att utreda om den beslutstödjande modellen kompletterar dessa. Resultatet av undersökningen visar att medan det finns många konsulttjänster som hjälper ett företag implementera AM så är det få som erbjuder någon form av mjukvara. Gällande frågan om AM är lönsam för vissa produkter så var det bara en mjukvara som kunde besvara den, dock utan att visa några kostnader. Den beslutstödjande modellen framtagen i denna studie fyller därmed en funktion bland nuvarande tjänster och mjukvaror.
Luo, Xiaoming. "Process planning for an Additive/Subtractive Rapid Pattern Manufacturing system". [Ames, Iowa : Iowa State University], 2009. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3389124.
Texto completo da fonteJönsson, David, e Mir Kevci. "Geometrical accuracy of metallic objects produced with Additive or Subtractive Manufacturing: a comparative in-vitro study". Thesis, Malmö högskola, Odontologiska fakulteten (OD), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-19934.
Texto completo da fontePurpose: To evaluate the production tolerance of objects produced by additive manufacturing systems (AM) for usage in dentistry and to compare with subtractive manufacturing system (SM) through reverse engineering. Materials and methods: Ten specimens of two geometrical objects were produced by five different AM machines and one SM machine. Object A mimics an inlay-shaped object, meanwhile object B reflects a four-unit bridge model. All the objects were divided into different measuring-axis; X, Y and Z. Measurements were performed with validated and calibrated equipment. Linear distances were measured with a digital calliper while corner radius and angle were measured with a digital microscope. Results: None of the additive manufacturing or subtractive manufacturing groups presented a perfect match to the CAD-file regarding all parameters included in present study. Considering linear measurements, the standard deviation for subtractive manufacturing group were consistent in all axis, except for X- and Y-axis in object A and Y-axis for object B. Meanwhile additive manufacturing groups had a consistent standard deviation in X- and Y- axis but not in Z-axis. Regarding corner radius measurements, SM group overall had the best accuracy for both object A and B comparing to AM groups. Conclusion: Within the limitations of this in vitro study, results support the hypothesis, considering AM had preferable capability to re-create complex and small geometry compare to SM. Meanwhile, SM were superior producing simple geometry and linear distances. Further studies are required to confirm these results.
Cunningham, Victor, Christopher A. Schrader e James (Trae) Young. "Navy additive manufacturing: adding parts, subtracting steps". Thesis, Monterey, California: Naval Postgraduate School, 2015. http://hdl.handle.net/10945/45834.
Texto completo da fonteThis study examines additive manufacturing (AM) and describes its potential impact on the Navy’s Supply Chain Management processes. Included in the analysis is the implementation of 3D printing technology and how it could impact the Navy’s future procurement processes, specifically based on a conducted analysis of the automotive aerospace industry. Industry research and development has identified multiple dimensions of AM technology, including material variety, cost saving advantages, and lead-time minimizations for manufacturing products. This project is designed to provide the Navy with a recommendation based on an in-depth industry case-study analysis.
Lesage, Philippe. "Etude et caractérisation sous sollicitations dynamiques de structures mécaniques en fabrication additive et soustractive". Electronic Thesis or Diss., Bourgogne Franche-Comté, 2024. http://www.theses.fr/2024UBFCA003.
Texto completo da fonteAdditive manufacturing is rapidly expanding and attracting increasing interest from industry, scientific research and the general public. Additive processes have opened up opportunities for producing structures with complex geometries compared to traditional manufacturing. However, the mechanical behavior of additive fabrications under loading conditions is not extensively explored. In particular, the mechanical characterization of these fabrications remains a challenge and often limits itself to pseudo-static investigation fields through conventional mechanical testing methods such as tensile tests. This doctoral thesis aims to contribute to the dynamic mechanical characterization of additive manufacturing on a comparative scale with subtractive manufacturing. This contribution is based on the use of modal methods in response to 'Low Velocity' stimuli applied by an impact hammer, and on a 'High Velocity' dynamic method studying the impact behavior of plates produced by additive (SLM) and subtractive processes
Davids, Margaret. "Erasure: An Additive and Subtractive Act". VCU Scholars Compass, 2019. https://scholarscompass.vcu.edu/etd/5866.
Texto completo da fonteStumpo, Gordon. "Design Iterations Through Fusion of Additive and Subtractive Design". Kent State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=kent1461602511.
Texto completo da fonteHANDAL, RAED S. I. "Additive Manufacturing as a Manufacturing Method: an Implementation Framework for Additive Manufacturing in Supply Chains". Doctoral thesis, Università degli studi di Pavia, 2017. http://hdl.handle.net/11571/1203311.
Texto completo da fonteThe supply chain is changing speedily and on a continuous basis to keep up with the rapid changes in the market, which are summarized as increased competition, changes in traditional customer bases, and changes in customers’ expectations. Thus, companies have to change their way of manufacturing final products in order to customize and expedite the delivery of products to customers. Additive manufacturing, the new production system, effectively and efficiently increases the capability of personalization during the manufacturing process. This consequently increases customer’s satisfaction and company’s profitability. In other words, additive manufacturing has become one of the most important technologies in the manufacturing field. Full implementation of additive manufacturing will change many well-known management practices in the production sector. Theoretical development in the field of additive manufacturing in regards to its impact on supply chain management is rare. There is no fully applied approach in the literature that is focused on managing the supply chain when additive manufacturing is applied. While additive manufacturing is believed to revolutionize and enhance traditional manufacturing, there is no comprehensive toolset developed in the manufacturing field that evaluates the impact of additive manufacturing and determines the best production method that suits the applied supply chain strategy. A significant portion of the existing supply chain methods and frameworks were adopted in this study to examine the implementation of additive manufacturing in supply chain management. The aim of this study is to develop a framework to explain when additive manufacturing “3D printing” impacts supply chain management efficiently. To build the framework, interviews with some companies that already use additive manufacturing in their production system have been carried out. Next, an online survey and two case studies evaluated the framework and validated the results of the final version of the framework. The conceptual framework shows the relationship among supply chain strategies, manufacturing strategy and manufacturing systems. The developed framework shows not only the ability of additive manufacturing to change and re-shape supply chains, but its impact as an alternative manufacturing technique on supply chain strategies. This framework helps managers select more effective production methods based on certain production variables, including product’s type, components’ value, and customization level.
Keil, Heinz Simon. "Quo vadis "Additive Manufacturing"". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-214719.
Texto completo da fonteCAIVANO, RICCARDO. "Design for Additive Manufacturing: Innovative topology optimisation algorithms to thrive additive manufacturing application". Doctoral thesis, Politecnico di Torino, 2022. http://hdl.handle.net/11583/2957748.
Texto completo da fonteLivros sobre o assunto "Additive and Subtractive Manufacturing"
Sharma, Varun, e Pulak Mohan Pandey. Additive and Subtractive Manufacturing Processes. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394.
Texto completo da fonteMavinkere Rangappa, Sanjay, Munish Kumar Gupta, Suchart Siengchin e Qinghua Song, eds. Additive and Subtractive Manufacturing of Composites. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-3184-9.
Texto completo da fonteCasola, Linda, ed. Convergent Manufacturing: A Future of Additive, Subtractive, and Transformative Manufacturing. Washington, D.C.: National Academies Press, 2022. http://dx.doi.org/10.17226/26524.
Texto completo da fontePrakash, Chander, Sunpreet Singh e Seeram Ramakrishna, eds. Additive, Subtractive, and Hybrid Technologies. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99569-0.
Texto completo da fonteKilli, Steinar, ed. Additive Manufacturing. 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742: CRC Press, 2017. http://dx.doi.org/10.1201/9781315196589.
Texto completo da fonteSrivastava, Manu, Sandeep Rathee, Sachin Maheshwari e T. K. Kundra. Additive Manufacturing. Boca Raton, FL : CRC Press/Taylor & Francis Group, 2019.: CRC Press, 2019. http://dx.doi.org/10.1201/9781351049382.
Texto completo da fonteZhou, Kun, ed. Additive Manufacturing. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-04721-3.
Texto completo da fontePandey, Pulak Mohan, Nishant K. Singh e Yashvir Singh. Additive Manufacturing. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003258391.
Texto completo da fonteGebhardt, Andreas, e Jan-Steffen Hötter. Additive Manufacturing. München, Germany: Carl Hanser Verlag GmbH & Co. KG, 2016. http://dx.doi.org/10.1007/978-1-56990-583-8.
Texto completo da fonteGebhardt, Andreas. Understanding Additive Manufacturing. München: Carl Hanser Verlag GmbH & Co. KG, 2011. http://dx.doi.org/10.3139/9783446431621.
Texto completo da fonteCapítulos de livros sobre o assunto "Additive and Subtractive Manufacturing"
Singh, Narinder, e Buta Singh. "Polymer-Based Additive Manufacturing". In Additive and Subtractive Manufacturing Processes, 121–43. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-7.
Texto completo da fonteDixit, Uday Shanker. "Evolution of Manufacturing". In Additive and Subtractive Manufacturing Processes, 1–30. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-1.
Texto completo da fonteBeravala, Hardik, e Nishant K. Singh. "Thermal-Energy-Based Advanced Manufacturing Processes". In Additive and Subtractive Manufacturing Processes, 109–20. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-6.
Texto completo da fonteSihag, Nitesh, Vikrant Bhakar e Kuldip Singh Sangwan. "An Environmental Sustainability Assessment of a Milling Process using Life Cycle Assessment". In Additive and Subtractive Manufacturing Processes, 75–84. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-4.
Texto completo da fonteGokhale, Nitish P., e Prateek Kala. "Directed Energy Deposition for Metals". In Additive and Subtractive Manufacturing Processes, 259–71. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-13.
Texto completo da fonteNayak, S. K., A. N. Jinoop, S. Shiva e C. P. Paul. "Laser Additive Manufacturing of Nickel Superalloys for Aerospace Applications". In Additive and Subtractive Manufacturing Processes, 185–210. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-10.
Texto completo da fonteKishore, Kamal, Manoj Kumar Sinha e Dinesh Setti. "Grinding and Recent Trends". In Additive and Subtractive Manufacturing Processes, 31–50. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-2.
Texto completo da fonteElgazzar, Haytham, e Khalid Abdelghany. "Recent Research Progress and Future Prospects in the Additive Manufacturing of Biomedical Magnesium and Titanium Implants". In Additive and Subtractive Manufacturing Processes, 145–61. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-8.
Texto completo da fonteDhimole, Vivek, Prashant K. Jain e Narendra Kumar. "Thermal Analysis and the Melt Flow Behavior of Ethylene Vinyl Acetate for Additive Manufacturing". In Additive and Subtractive Manufacturing Processes, 241–57. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-12.
Texto completo da fonteKumar, Raman, Paramjit Singh Bilga e Sehijpal Singh. "An Investigation of Active Cutting Energy for Rough and Finish Turning of Alloy Steel". In Additive and Subtractive Manufacturing Processes, 273–97. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003327394-14.
Texto completo da fonteTrabalhos de conferências sobre o assunto "Additive and Subtractive Manufacturing"
Woods, Matthew R., Nicholas A. Meisel, Timothy W. Simpson e Corey J. Dickman. "Redesigning a Reaction Control Thruster for Metal-Based Additive Manufacturing: A Case Study in Design for Additive Manufacturing". In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-59722.
Texto completo da fonteBorish, Michael, e Jamie Westfall. "Additive and Subtractive Manufacturing Augmented Reality Interface (ASMARI)". In SoutheastCon 2020. IEEE, 2020. http://dx.doi.org/10.1109/southeastcon44009.2020.9249710.
Texto completo da fonteFrank, M., O. Harrysson, R. Wysk, N. Chen, H. Srinivasan, G. Hou e C. Keough. "A Method for Integrating Additive and Subtractive Operations for Metal Parts – Direct Additive Subtractive Hybrid Manufacturing (DASH)". In MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017/mst_2017_366_368.
Texto completo da fonteFrank, M., O. Harrysson, R. Wysk, N. Chen, H. Srinivasan, G. Hou e C. Keough. "A Method for Integrating Additive and Subtractive Operations for Metal Parts – Direct Additive Subtractive Hybrid Manufacturing (DASH)". In MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017mst/2017/mst_2017_366_368.
Texto completo da fonteWang, Yunan, Chuxiong Hu, Ze Wang, Shize Lin, Ziyan Zhao e Yu Zhu. "Slice Extension for High-Quality Hybrid Additive-Subtractive Manufacturing". In IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2023. http://dx.doi.org/10.1109/iecon51785.2023.10311641.
Texto completo da fonteMassoni, Brandon R., e Matthew I. Campbell. "Substrate Optimization for Hybrid Manufacturing". In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-98068.
Texto completo da fonteBlasco, Eva, David Graefe, Markus M. Zieger, Christopher Barner-Kowollik e Martin Wegener. "Merging 3D additive and subtractive manufacturing on the microscale (Conference Presentation)". In Laser 3D Manufacturing VI, editado por Henry Helvajian, Bo Gu e Hongqiang Chen. SPIE, 2019. http://dx.doi.org/10.1117/12.2508211.
Texto completo da fonteTrofimov, Vyacheslav A., Boyuan Zheng, Di Wang, Yongqiang Yang, Meng Wang, Zhiheng Tai, Zhongwei Yan e Yan Wang. "Study on additive and subtractive manufacturing using picosecond laser micromachining". In Lasers and Photonics for Advanced Manufacturing, editado por Sylvain Lecler, Wilhelm Pfleging e François Courvoisier. SPIE, 2024. http://dx.doi.org/10.1117/12.3014590.
Texto completo da fonteLynn, Roby, Kathryn Jablokow, Nithin Reddy, Christopher Saldana, Tommy Tucker, Timothy W. Simpson, Thomas Kurfess e Christopher Williams. "Using Rapid Manufacturability Analysis Tools to Enhance Design-for-Manufacturing Training in Engineering Education". In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-59295.
Texto completo da fontePatterson, Albert E., e James T. Allison. "Manufacturability Constraint Formulation for Design Under Hybrid Additive-Subtractive Manufacturing". In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/detc2018-85637.
Texto completo da fonteRelatórios de organizações sobre o assunto "Additive and Subtractive Manufacturing"
Beaman, Joseph J., Clint Atwood, Theodore L. Bergman, David Bourell, Scott Hollister e David Rosen. Additive/Subtractive Manufacturing Research and Development in Europe. Fort Belvoir, VA: Defense Technical Information Center, dezembro de 2004. http://dx.doi.org/10.21236/ada466756.
Texto completo da fonteCunningham, Victor, Christopher A. Schrader e James Young. Navy Additive Manufacturing: Adding Parts, Subtracting Steps. Fort Belvoir, VA: Defense Technical Information Center, junho de 2015. http://dx.doi.org/10.21236/ada632470.
Texto completo da fonteSchraad, Mark William, e Marianne M. Francois. ASC Additive Manufacturing. Office of Scientific and Technical Information (OSTI), junho de 2015. http://dx.doi.org/10.2172/1186037.
Texto completo da fonteCrain, Zoe, e Roberta Ann Beal. Additive Manufacturing Overview. Office of Scientific and Technical Information (OSTI), junho de 2018. http://dx.doi.org/10.2172/1441284.
Texto completo da fonteMurph, S. NANO-ADDITIVE MANUFACTURING. Office of Scientific and Technical Information (OSTI), outubro de 2019. http://dx.doi.org/10.2172/1572880.
Texto completo da fonteKorinko, P., A. Duncan, A. D'Entremont, P. Lam, E. Kriikku, J. Bobbitt, W. Housley, M. Folsom e (USC), A. WIRE ARC ADDITIVE MANUFACTURING. Office of Scientific and Technical Information (OSTI), setembro de 2018. http://dx.doi.org/10.2172/1475286.
Texto completo da fontePeterson, Dominic S. Additive Manufacturing for Ceramics. Office of Scientific and Technical Information (OSTI), janeiro de 2014. http://dx.doi.org/10.2172/1119593.
Texto completo da fontePepi, Marc S., Todd Palmer, Jennifer Sietins, Jonathan Miller, Dan Berrigan e Ricardo Rodriquez. Advances in Additive Manufacturing. Fort Belvoir, VA: Defense Technical Information Center, julho de 2016. http://dx.doi.org/10.21236/ad1012134.
Texto completo da fonteTorres Chicon, Nesty. Additive Manufacturing Technologies Survey. Office of Scientific and Technical Information (OSTI), agosto de 2020. http://dx.doi.org/10.2172/1658439.
Texto completo da fonteDehoff, Ryan R., e Michael M. Kirka. Additive Manufacturing of Porous Metal. Office of Scientific and Technical Information (OSTI), junho de 2017. http://dx.doi.org/10.2172/1362246.
Texto completo da fonte