Conecte-se

Bibliografias temáticas / Acquisition of computer software / Artigos de revistas

Siga este link para ver outros tipos de publicações sobre o tema: Acquisition of computer software.

Artigos de revistas sobre o tema "Acquisition of computer software"

Autor: Grafiati

Publicado: 4 de junho de 2021

Última modificação: 12 de fevereiro de 2022

Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos

Selecione um tipo de fonte:

Veja os 50 melhores artigos de revistas para estudos sobre o assunto "Acquisition of computer software".

Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.

Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.

Veja os artigos de revistas das mais diversas áreas científicas e compile uma bibliografia correta.

1

Zähner, Christopher. "Second language acquisition and the computer: variation in second language acquisition". ReCALL 7, n.º 1 (maio de 1995): 34–48. http://dx.doi.org/10.1017/s0958344000005097.

Texto completo da fonte

Resumo:

In this paper I will argue that learner variation in second language acquisition poses a potentially serious problem for the successful design and application of CALL and ICALL software'. Whereas a teacher is able to use direct and immediate feedback from students to adapt to different learning styles, rates of progress and acquisition paths, the possibilities of computer software are much more limited.

Estilos ABNT, Harvard, Vancouver, APA, etc.

2

Nelson, Paul, William Richmond e Abraham Seidmann. "Two dimensions of software acquisition". Communications of the ACM 39, n.º 7 (julho de 1996): 29–35. http://dx.doi.org/10.1145/233977.233986.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

3

Greenwell, R. M., e J. D. T. Tannock. "Computer-aided acquisition of manufacturing information". Advances in Engineering Software 20, n.º 1 (janeiro de 1994): 1–12. http://dx.doi.org/10.1016/0965-9978(94)90025-6.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

4

Noakes, J. E., J. D. Spaulding e R. J. Valenta. "Low-Level Liquid Scintillation Counter Array with Computerized Data Acquisition and Age Calculation Capabilities for 14C Dating". Radiocarbon 37, n.º 2 (1995): 773–79. http://dx.doi.org/10.1017/s0033822200031325.

Texto completo da fonte

Resumo:

We describe a two-phase study directed toward background reduction of a manual liquid scintillation counter and the interfacing of electronics for counting to a computer data acquisition system. Counter background reduction is achieved with afterpulse electronics, a high-performance cocktail, an auxiliary detector/guard and a special sample vial holder. The data acquisition system is comprised of an electronic signal processor and sorter for operating up to eight counters simultaneously and interfacing to a computer with software for data storage, acquisitions and age dating calculations. We discuss low-background counter modifications, electronic signal processing and computer software for 14C age dating.

Estilos ABNT, Harvard, Vancouver, APA, etc.

5

Yang, Tie Zao, Chang Sheng Wang, Hai Jun Zhang e Hong Jie Zhao. "High-Speed Data Acquisition System Based on MP424 Acquisition Card". Advanced Materials Research 805-806 (setembro de 2013): 1800–1804. http://dx.doi.org/10.4028/www.scientific.net/amr.805-806.1800.

Texto completo da fonte

Resumo:

Mainly introduce MP424 high-speed data acquisition system and realize data acquisition, processing and display by way of compiling corresponding upper computer software with LabVIEW software. Acquire spark advance angle and fuel injection advance angle signals and compare with experimental model further. The results present that this data acquisition system is feasible.

Estilos ABNT, Harvard, Vancouver, APA, etc.

6

Lai, Sien, Ting Shu, Guang Hui Yang e Rui Lin Zhang. "Accessed Data Acquisition Model Based on Multi-Protocolequipment". Advanced Materials Research 765-767 (setembro de 2013): 1636–39. http://dx.doi.org/10.4028/www.scientific.net/amr.765-767.1636.

Texto completo da fonte

Resumo:

According to the requirement of multi-devices access to the computer in intelligent building monitoring system, combined with the principle of the upper computers data acquisition and the principle of configuration software, this paper proposes auppercomputerdata acquisition model by simulating the equipment into channels and the model is based on double buffers sampling technology. The model adopts the principle of device drivers;different equipments computer modules access to the model in the form of plug-ins.

Estilos ABNT, Harvard, Vancouver, APA, etc.

7

GASCA-HURTADO, GLORIA PIEDAD, GUILLERMO GONZÁLEZ-CALDERÓN, JOSE A. CALVO-MANZANO e TOMÁS SAN FELIU. "RISK TAXONOMY RELATED TO SOFTWARE ACQUISITION: A CASE STUDY". International Journal of Software Engineering and Knowledge Engineering 23, n.º 09 (novembro de 2013): 1205–20. http://dx.doi.org/10.1142/s021819401350037x.

Texto completo da fonte

Resumo:

Currently, software acquisition is strategic for organizations. Companies need support to succeed in software acquisition projects because such projects commonly present high failure rates. To solve this problem, it is necessary to design mechanisms for software acquisition, such as risk classification to identify the typical risks that may affect the success of a software acquisition project. Thus, herein, we present a case study, showing the implementation of a risk taxonomy whose structure is designed using a method for its construction, with a mechanism to reduce the risk of acquisition projects that adversely affect their success.

Estilos ABNT, Harvard, Vancouver, APA, etc.

8

Adams, M. J. "Computer interfacing for instrumental control and data acquisition. The software interface". Analytical Proceedings 25, n.º 12 (1988): 389. http://dx.doi.org/10.1039/ap9882500389.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

9

McDown, Robert J., Cihan Varol, Leonardo Carvajal e Lei Chen. "In-Depth Analysis of Computer Memory Acquisition Software for Forensic Purposes". Journal of Forensic Sciences 61 (17 de novembro de 2015): S110—S116. http://dx.doi.org/10.1111/1556-4029.12979.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

10

REYNOLDS, ROBERT G. "GUEST EDITOR'S INTRODUCTION: ACQUISITION OF SOFTWARE ENGINEERING KNOWLEDGE". International Journal of Software Engineering and Knowledge Engineering 01, n.º 04 (dezembro de 1991): 327–29. http://dx.doi.org/10.1142/s0218194091000238.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

11

Boulianne, Emilio. "Impact of accounting software utilization on students' knowledge acquisition". Journal of Accounting & Organizational Change 10, n.º 1 (25 de fevereiro de 2014): 22–48. http://dx.doi.org/10.1108/jaoc-12-2011-0064.

Texto completo da fonte

Resumo:

Purpose – This study investigates the impact that software utilization may have on students' knowledge acquisition of the accounting cycle. Differences in knowledge acquisition are examined between three groups of students: those who completed an accounting case manually using the traditional pencil and paper approach, using software, and first manually and then using software. The main research question is: “To what extent does using computers to study the accounting cycle lead to better knowledge acquisition?” This paper aims to inform changes in accounting education. Design/methodology/approach – The survey method was employed to collect information from accounting students in a Canadian business school. A total of 1,053 usable questionnaires were returned. Declarative knowledge and procedural knowledge are the theoretical underpinnings. Findings – The results indicate that students who first completed the case manually and then completed the same case using accounting software experienced the best knowledge acquisition. This suggests that the best manner for students to acquire concrete knowledge of the accounting cycle is by completing cases using both methods. The results also indicate that students who completed the case using only the software experienced better knowledge acquisition than did students who completed the case only manually. This suggests that software can be effectively utilized and integrated in class to improve knowledge acquisition of accounting information systems. Originality/value – Little investigation has been performed on the usefulness and impact accounting software utilization may have on students' level of learning. The findings may benefit students and faculty members by helping in curriculum design changes, course design, and computer implementation decisions. The findings of this study have the potential to make a difference in the way that educators teach and business students learn. Business education may be improved by the judicious use of software in the classroom.

Estilos ABNT, Harvard, Vancouver, APA, etc.

12

Stuurman, Nico, Nenad Amdodaj e Ron Vale. "μManager: Open Source Software for Light Microscope Imaging". Microscopy Today 15, n.º 3 (maio de 2007): 42–43. http://dx.doi.org/10.1017/s1551929500055541.

Texto completo da fonte

Resumo:

No longer are biologists content to peer through the oculars of a microscope. Eyes have been replaced by digital cameras. Instead of manual control of microscope stages, filters and light sources, modern microscopes have become fully robotic. Image acquisition and robotic movements require computer control. With such equipment it is possible to automatically record images at multiple wavelengths, carry out time-lapse recordings of living cells using very short exposure times and low light doses, and even to record images at multiple positions (e.g. from a multi-well plate) without operator intervention. Clearly, computer control of light microscope image acquisition is making many new experimental imaging strategies possible in the biological sciences.

Estilos ABNT, Harvard, Vancouver, APA, etc.

13

Zhang, Hong Wei. "Online Monitoring System of the Mine Main Fan". Advanced Materials Research 756-759 (setembro de 2013): 376–79. http://dx.doi.org/10.4028/www.scientific.net/amr.756-759.376.

Texto completo da fonte

Resumo:

Monitoring system uses upper and lower machine model. The machine adopts the simple operation, reliable performance of PLC acquisition of main fan for each parameter and alarm control. In order to ensure that the fan monitoring system reliability and real time nature, based on the VC++ and SQL Server to develop a set of computer monitoring system. Monitoring software system and data acquisition and processing hardware system connected by a RS-485 bus system. Computer to other computers in a network or through the monitoring host forwarding see fan monitoring interface.

Estilos ABNT, Harvard, Vancouver, APA, etc.

14

Gao, Jun Fang, e Jian Long Shao. "The Software Design of Aging Test System for Rechargeable Battery Based on LabVIEW". Applied Mechanics and Materials 291-294 (fevereiro de 2013): 2771–74. http://dx.doi.org/10.4028/www.scientific.net/amm.291-294.2771.

Texto completo da fonte

Resumo:

Based on the LabVIEW platform, the aging test system of rechargeable communication battery was designed by parallelizing application program framework, and realized the control of programmable power supply, electronic loads, data acquisition card and digital IO card. Multiple threads including human computer interaction, state control, data acquisition, data showing and saving were synchronously processed, which efficiently and steadily finished aging test of twenty batteries. Charge-discharge state test and aging test data acquisition with monitoring acquisition method based on NI DAQmx data acquisition driver of LabVIEW and data acquisition card were detailed.

Estilos ABNT, Harvard, Vancouver, APA, etc.

15

David, Ovidiu Tiberiu, Camelia Szuhanek, Robert Angelo Tuce, Andra Patricia David e Marius Leretter. "Polylactic Acid 3D Printed Drill Guide for Dental Implants Using CBCT". Revista de Chimie 68, n.º 2 (15 de março de 2017): 341–42. http://dx.doi.org/10.37358/rc.17.2.5449.

Texto completo da fonte

Resumo:

The aim of the present study is to describe a method for setting up a polylactic acid (PLA) 3D printed surgical guide for the minimally invasive insertion of dental implants using the CBCT (cone beam computed tomography) acquisition without occlusal contact and CAD � CAM (computer-aided design/computer assisted manufacture) software for its design, production and testing.

Estilos ABNT, Harvard, Vancouver, APA, etc.

16

Peppin, William A., e Walter F. Nicks. "Real-Time Analog and Digital Data Acquisition Through CUSP". Seismological Research Letters 63, n.º 2 (1 de abril de 1992): 181–89. http://dx.doi.org/10.1785/gssrl.63.2.181.

Texto completo da fonte

Resumo:

Abstract The University of Nevada Seismological Laboratory operates an array of 60 analog short-period and 10 three-component digital telemetered seismic stations, 90 data traces in all, in Nevada and eastern California. Formerly, the seismic data streams were recorded and processed on three separate computers running disparate software and writing incompatible data formats which made access to the digital data quite cumbersome. These systems were recently replaced by a single computer system, a MicroVAX II running VAX/VMS, together with Generic CUSP (Caltech -U.S.G.S. Seismic Processing System), a controlled software system from the U.S.G.S. in Menlo Park. Telemetered digital data are stored simultaneously in two ways, unique to this network. First, these digital data are brought asynchronously into the computer using a standard direct-memory access interface and recorded continuously on an Exabyte 8-mm helical-scan tapedrive. Second, the digital data are passed through a D to A converter and intermixed with the incoming analog data stream used for routine network processing. This analog data stream is then itself digitized and presented to the computer. In this way, calibrated digital waveforms are available in the routine data processing stream, now entirely comprised of digital waveforms, used to locate earthquakes. At the same time, this allows easy access to these data in research applications involving the processing of seismic waveforms.

Estilos ABNT, Harvard, Vancouver, APA, etc.

17

Seppänen, Veikko. "Acquisition, organisation and reuse of software design knowledge". Software Engineering Journal 7, n.º 4 (1992): 238. http://dx.doi.org/10.1049/sej.1992.0025.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

18

Liu, Cui Ling, Sen Lei Dou e Yu Jun Hu. "Development of Portable NIR Spectrum Acquisition and Analysis Software". Applied Mechanics and Materials 716-717 (dezembro de 2014): 1034–38. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.1034.

Texto completo da fonte

Resumo:

NIR spectrum is established as an independent analysis technology and applied in more fields. The demand of portable and fast analysis is impeding. Using JDSU’s MicroNIR1700 NIR spectrum engine as the hardware platform, we contrived the NIR spectrum acquisition and analysis system. The spectrum data is output from the engine through USB port. We develop the software on computer by C# language. The software has the function of spectrum acquisition, pretreatment, modeling and prediction, the result is displayed by graphs and tables. This system is tested successfully by using flour sample which lays the foundation for promoting the portable NIR acquisition and analysis system.

Estilos ABNT, Harvard, Vancouver, APA, etc.

19

Gil, Joseph, e David H. Lorenz. "Environmental acquisition". ACM SIGPLAN Notices 31, n.º 10 (outubro de 1996): 214–31. http://dx.doi.org/10.1145/236338.236358.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

20

Lei, Qian Zhao. "Computer-Aided Modern Physics Experiment". Advanced Materials Research 271-273 (julho de 2011): 849–52. http://dx.doi.org/10.4028/www.scientific.net/amr.271-273.849.

Texto completo da fonte

Resumo:

In order to better adapt to the modern physics experiments under intelligent conditions, we examined a number of modern physics experiment the intelligent way from data acquisition and processing and concluded: Data collection can be attributed to two ways, one way is by means of computer device (such as sound card) to receive data, another way to install the data acquisition card (or frame grabber), moreover to install device driver in the computer; Modern experimental data processing is the main purpose of the intelligentization, with special software, fast data processing, and giving visual results. The results contribute to a better use of computer-based modern physics experiments.

Estilos ABNT, Harvard, Vancouver, APA, etc.

21

Haddad, Maliha, e Vincent Ribière. "The use of knowledge management in software acquisition". VINE 37, n.º 3 (4 de setembro de 2007): 295–313. http://dx.doi.org/10.1108/03055720710825627.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

22

Schatz, Bradley. "BodySnatcher: Towards reliable volatile memory acquisition by software". Digital Investigation 4 (setembro de 2007): 126–34. http://dx.doi.org/10.1016/j.diin.2007.06.009.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

23

Wang, Xin, Shu Mao Wang, Na Duan e Jing Wang. "Study on the Development Platform of Codeless Data Acquisition Software". Applied Mechanics and Materials 195-196 (agosto de 2012): 1125–30. http://dx.doi.org/10.4028/www.scientific.net/amm.195-196.1125.

Texto completo da fonte

Resumo:

In this paper, a codeless data acquisition software development platform (CDASDP), which is written by LabWindows/CVI, is described. This software, based on the idea of software reusing, is a visual codeless programming system with built in support for databases, 2D drawings, ActiveX, etc. Users can develop personalized software by themselves and need not learning or using textural computer languages. Complex programming logic can be simplified into 3 steps such as parameters configuration, user-interface edition, and software creation. By use of CDASDP, development cycle and cost of professional measurement software (PMS) is reduced substantially.

Estilos ABNT, Harvard, Vancouver, APA, etc.

24

Arendt, Ryszard, e Ryszard Michalski. "HARDWARE AND SOFTWARE OF DIAGNOSTIC SYSTEM OF WHEELED TRACTORS / HARDWER I SOFTWER SYSTEMU DIAGNOSTYCZNEGO CIĄGNIKÓW KOŁOWYCH". Journal of KONBiN 26, n.º 1 (1 de junho de 2013): 151–64. http://dx.doi.org/10.2478/jok-2013-0090.

Texto completo da fonte

Resumo:

Abstract The design and construction of a diagnostic device requires the development of a system for the acquisition and processing of measurement data, numerous cable connections and an on-board computer. The key component of a diagnostic system was the Fujitsu FUTRO S100 on-board computer in shock and vibration-proof housing, with passive cooling and a 16 GB Compact Flash memory card. The computer was provided with a NVOX LCD 10” VGA/FVAT touch screen. The following software was used: Windows XP-2000, USB/DeviceNet interface module and a diagnostic program. The computer was connected to the I-7565USB/DeviceNet master device via the USB port. The CAN bus connected the interface module with three slave devices collecting data from sensors installed in various locations of a wheeled tractor.

Estilos ABNT, Harvard, Vancouver, APA, etc.

25

Ayebeng Botchway, Edward. "Software Application Employed in Architectural Design Education: The Case of KNUST". Review of European Studies 8, n.º 2 (15 de março de 2016): 30. http://dx.doi.org/10.5539/res.v8n2p30.

Texto completo da fonte

Resumo:

<p>Computer software has come to replace the manual form of designing in both architectural education and practice. The use of drawing boards had been employed in architectural education and practice for a long time. Since the first half of the twentieth century, computer hardware and corresponding software have seen dramatic change and development manufactured and tailored to meet the demand of changing technological and human needs. Architecture has had its fair share since the advent of computers and has seen major milestone changes in its integration into the profession. In the last century, architectural education in Ghana has also witnessed this revolution. From the year 2000 and thereon since Computer Aided Architectural Design (CAAD) was introduced in the Department of Architecture (DOA) in the Kwame Nkrumah University of Science and Technology (KNUST) there has been tremendous improvement in the CAAD tools used in architectural design education. There is therefore the need to evaluate the CAAD software used by the students and faculty. This paper looked at the existence and the mode in which CAAD software is applied in the department, the predominant software used by students and the mode of acquisition of the software. The findings proved that CAAD is taught as part of the curriculum in the DOA and has helped improve architectural design education over the years. However, the full potential and benefit of CAAD use has not been realized as a result of challenges faced by students and faculty in teaching, learning and acquisition of software.</p>

Estilos ABNT, Harvard, Vancouver, APA, etc.

26

Lu, Qian Qian, Jian Hua Wei e Jian Ruan. "Design and Development of Test and Control System for Hydraulic Steering Control Unit Based on Virtual Instrument". Applied Mechanics and Materials 490-491 (janeiro de 2014): 1092–96. http://dx.doi.org/10.4028/www.scientific.net/amm.490-491.1092.

Texto completo da fonte

Resumo:

A system combined the function of Industrial Computer, PLC, virtual instruments, sensors and data acquisition was designed and developed for testing and controlling of hydraulic steering control unit, which can achieve automated data acquisition, data processing, test results judgment, false alarms and etc. with the development of computer and science. The software of test system was designed through LabVIEW, and by using module design method, error detection, modify and maintenance of the software turn to be simple and the software become more robust. The system also adopted shielding and filtering with combination of hardware and software to improve test accuracy which reduces test error caused by operators and improve test efficiency.

Estilos ABNT, Harvard, Vancouver, APA, etc.

27

Cobbe, Richard, e Matthias Felleisen. "Environmental acquisition revisited". ACM SIGPLAN Notices 40, n.º 1 (12 de janeiro de 2005): 14–25. http://dx.doi.org/10.1145/1047659.1040307.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

28

Rodríguez, M., A. Ayala, F. Rosa, F. Herrera, S. Rodríguez, M. Díaz-González e S. R. Buenafuente. "A Low-Cost Interface Circuit to Enable A/D Conversion Using the Parallel Port". International Journal of Electrical Engineering & Education 38, n.º 3 (julho de 2001): 223–31. http://dx.doi.org/10.7227/ijeee.38.3.4.

Texto completo da fonte

Resumo:

A simple and low-cost acquisition device using the computer parallel port has been used to implement a full acquisition system composed of an analogue interface, a 12-bit analogue-to-digital converter, a quad three to one multiplexer and a software package aimed at managing the acquisition process. The features of this system make its implementation a suitable educational resource for undergraduate students from Engineering, Physics and Computer Sciences faculties.

Estilos ABNT, Harvard, Vancouver, APA, etc.

29

Barros, Everaldo de, Carlos d'Andrade Souto, Leandro Ribeiro de Camargo e Mauro Hugo Mathias. "Application of a computer sound card for measurement of mechanical vibrations". Revista Brasileira de Ensino de Física 37, n.º 4 (dezembro de 2015): 4313–1. http://dx.doi.org/10.1590/s1806-11173742036.

Texto completo da fonte

Resumo:

This paper presents a data acquisition and analysis system based on a computer sound card for measuring and processing random vibration signals. This system turns the computer into a two-channel measurement instrument which provides sample rate, simultaneous sampling, frequency range, filters and others essential capabilities required to perform random vibrations measurements. An easy-to-use software was developed for vibration monitoring and analysis, including facilities for data recording, digital signal processing and real time spectrum analyzer. Since the tasks of vibration data acquisition frequently require expensive hardware and software, this versatile system provides students a very accurate and inexpensive solution for experimental studying mechanical vibrations.

Estilos ABNT, Harvard, Vancouver, APA, etc.

30

Zhang, Sheng, e Si Wei Jin. "Wireless Temperature and Humidity Acquisition System Based on MSP430F5438". Applied Mechanics and Materials 220-223 (novembro de 2012): 1805–8. http://dx.doi.org/10.4028/www.scientific.net/amm.220-223.1805.

Texto completo da fonte

Resumo:

This article has designed an low power granary temperature and humidity acquisition system, used the latest model MSP430F5438 belonging to TI company as the processor of the lower computer, colleceted temperature and humidity by SHT11, transmitted the collected physical data to the host computer through the SIM300 wireless transmission module and received data stored in the database. The host computer was done by using the C + + builder software, analysed the real-time physical datas and made reasonable warnings.

Estilos ABNT, Harvard, Vancouver, APA, etc.

31

Kim, Haidong, Matthew J. Zabik e Stanley R. Crouch. "Modification of IBM-PC Data Acquisition and Control Adaptor for Versatile Data Acquisition and Control System". Applied Spectroscopy 43, n.º 4 (maio de 1989): 608–11. http://dx.doi.org/10.1366/0003702894202409.

Texto completo da fonte

Resumo:

An inexpensive but versatile data acquisition system has been developed with the use of a modified IBM-DACA (IBM Personal Computer Data Acquisition and Control Adaptor). With the modification described, the IBM-DACA can be operated in more various modes of operation. Data can be read either by software trigger or by hardware trigger mode. Also, all the three channels of the on-board timer/counter can be fully utilized for complex or accurate timing and experiment control. This allows gated data acquisition with user-specified timing and a maximum A/D throughput to memory of up to 18520 samples/s in a single channel. With its menu-driven software, this system can be used in various scientific data acquisition environments with minimal expense.

Estilos ABNT, Harvard, Vancouver, APA, etc.

32

Sagiraju, P. K., S. Agaian e D. Akopian. "Reduced complexity acquisition of GPS signals for software embedded applications". IEE Proceedings - Radar, Sonar and Navigation 153, n.º 1 (2006): 69. http://dx.doi.org/10.1049/ip-rsn:20050091.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

33

Zhang, Yan Jun, Li Xia Di, Jing Cui e Jing Yang. "Variable Multi-Channel High Frequency Signal Acquisition System". Advanced Materials Research 798-799 (setembro de 2013): 515–19. http://dx.doi.org/10.4028/www.scientific.net/amr.798-799.515.

Texto completo da fonte

Resumo:

A flexible system to multi-channel high frequency signal acquisition and transmission was designed. The system took FPGA as the center control logic unit. It could realize real-time acquisition, conditioning, modulus conversion to multi-channel high frequency signal and sent the converted digital signal to the storage device through FIFO. The system could also realize the real-time monitoring, data unpacking and analysis to storaged data by using computer software. FPGA software design adopted VHDL language. The experiment results show that this data acquisition and transmission system is stable and accurate.

Estilos ABNT, Harvard, Vancouver, APA, etc.

34

Wang, Xiao Fang, Jian Jun Zhou, Xiu Wang e Pinghui Wu. "The Design of Pigeonry Environment Monitoring System Based on ZigBee". Advanced Materials Research 774-776 (setembro de 2013): 1523–27. http://dx.doi.org/10.4028/www.scientific.net/amr.774-776.1523.

Texto completo da fonte

Resumo:

The pigeonry environment monitoring system based on ZigBee wireless network which was designed and developed consists of three main parts: the data acquisition module, the central node and the environment monitoring software. In this system, the data acquisition controller is mainly composed of ZigBee wireless acquisition module, air temperature and humidity sensor, dust concentration sensor and light sensor, the controller can collect pigeonry environmental information and receive PC instruction from the host computer. The central node uses a wireless data transmission module which is as the information transmission channel between the host computer and the data acquisition module. The environment monitoring software is as a man-machine interface, which was developed based on C#, and the storage of information collected is achieved by SQL Server. After the test and experiment, the results show that the pigeonry environment data acquisition controller can regularly collect environmental information and submit data information to the monitoring center, thus achieving the remote wireless control of monitoring center. The pigeonry environment monitoring software is able to display and record the collected and transmitted data, also achieve the remote control of the pigeonry environment.

Estilos ABNT, Harvard, Vancouver, APA, etc.

35

Potter, C. S., B. Carragher, H. Chu, B. J. Frey, R. Josephs, C. Lin, N. Kisseberth, K. L. Miller e K. Nahrstedt. "A Testbed for Automated Acquistion From a TEM". Microscopy and Microanalysis 4, S2 (julho de 1998): 8–9. http://dx.doi.org/10.1017/s143192760002016x.

Texto completo da fonte

Resumo:

We are developing a testbed for automated identification of specimens, and acquisition of high resolution images for 3D macromolecular EM. Several software package which have been developed specifically for acquisition of tomographic data sets have illustrated the benefits of automation. These software packages require the user to identify a specimen of interest and then automatically acquire a single tilt series from the identified specimen. The testbed we are developing will provide a generalized system for specimen identification, image acquisition and image quality assessment. The goals of the testbed are to provide a system that will acquire EM images unattended by an operator.The testbed integrates a computer controlled TEM with a distributed real-time image processing environment. Computerized control and image acquisition from the TEM uses the emScope software package (1). This is coupled to existing image processing software packages and new software tools developed specifically for this project.

Estilos ABNT, Harvard, Vancouver, APA, etc.

36

Krivanek, O. L., W. J. de Ruijter, C. E. Meyer, M. L. Leber e J. Wilbrink. "Data acquisition and processing for automated electron microscopy". Proceedings, annual meeting, Electron Microscopy Society of America 51 (1 de agosto de 1993): 546–47. http://dx.doi.org/10.1017/s0424820100148563.

Texto completo da fonte

Resumo:

Automated electron microscopy promises to perform many tasks better and faster than a human operator. It should also allow the operator to concentrate on the larger picture without having to worry about countless details that can be best handled by a computer. It requires three essential components: 1) data acquisition system that provides the computer with high-quality data on line, 2) computer and software able to analyze the incoming data in real time, and 3) control links that enable the computer to adjust the important microscope parameters.An optimized system architecture is shown schematically in Fig. 1. The microscope is equipped with various microprocessors that control its hardware, and provide data processing abilities devoted to different types of signals (e.g., X-ray spectra). These microprocessors use a standardized communication protocol to communicate over a standard network (such as AppleTalk or Ethernet) with a “master computer”, which provides the user interface, as well as the computing power necessary to handle the most demanding tasks.

Estilos ABNT, Harvard, Vancouver, APA, etc.

37

Gorin, A. L., S. E. Levinson, A. N. Gertner e E. Goldman. "Adaptive acquisition of language". Computer Speech & Language 5, n.º 2 (abril de 1991): 101–32. http://dx.doi.org/10.1016/0885-2308(91)90020-q.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

38

Alcalde, C., J. I. Navarro, E. Marchena e G. Ruiz. "Acquisition of Basic Concepts by Children with Intellectual Disabilities Using a Computer-Assisted Learning Approach". Psychological Reports 82, n.º 3 (junho de 1998): 1051–56. http://dx.doi.org/10.2466/pr0.1998.82.3.1051.

Texto completo da fonte

Resumo:

Computer-assisted learning can be an efficient learning-teaching procedure. Although there is an extensive educational software tradition for this approach, few have better performance than standard drill-and-practice methods. In this work, the specific software “Let's Play With …” was designed to teach concepts of colours, shapes, and body position to children with intellectual disabilities. The software structure follows the Gagné instructional design and applied behaviour analysis. The program was carried out with 39 boys and 21 girls who were special education students in the Cadiz School District. Statistically significant differences were found between groups taught with and without the software.

Estilos ABNT, Harvard, Vancouver, APA, etc.

39

Shilei, Xue, Hao Zhao, An Ying e Huang Kun. "The Research of Three Regions Acquisition and Analysis System of Pulse Based on Flexible Sensor". E3S Web of Conferences 271 (2021): 03056. http://dx.doi.org/10.1051/e3sconf/202127103056.

Texto completo da fonte

Resumo:

The objectification of pulse diagnosis is very important to the development and inheritance of TCM, the first step is how to collect more abundant and comprehensive pulse information quickly, reduce the threshold of users for using pulse diagnosis equipment. The existing pulse diagnosis equipment has some limitations, such as single acquisition site, complex compression form and serious dependence on professionals for correcting-pulse position selection. Therefore, a three-pulse diagnosis system based on flexible sensor is designed, which uses a new type of flexible sensor as the data acquisition port, combined with upper computer software and lower computer software to achieve goals of intelligent decompression and data acquisition from Cun, Guan, Chi. The equipment not only greatly reduces the difficulty for users to find correct pulse position identification, but also collect non-destructive pulse information, which provides a new acquisition mode for the pulse diagnosis instrument.

Estilos ABNT, Harvard, Vancouver, APA, etc.

40

Hunt, John A. "Computer-aided parallel EELS techniques: acquisition, processing, & imaging". Proceedings, annual meeting, Electron Microscopy Society of America 47 (6 de agosto de 1989): 398–99. http://dx.doi.org/10.1017/s0424820100153968.

Texto completo da fonte

Resumo:

The recent commercial introduction of the parallel detection electron energy-loss spectrometer has undoubtedly made electron energy-loss spectroscopy (EELS) more viable as a technique for routine microanalysis. Additionally, the increased recording efficiency of parallel EELS (PEELS) warrants the use of more involved acquisition and processing techniques than was necessary, or even possible with serial EELS. This increased complexity places greater demands on the computer systems controlling data acquisition. Multichannel analyzers systems with small resources and limited programming facilities are not capable of exploiting the full capabilities of the PEELS spectrometer.Preliminary efforts of the author with the Gatan PEELS spectrometer were concentrated on development of a flexible acquisition system at National Institutes of Health. Hardware control is performed through machine-language drivers called from high-level languages (HLL) such as FORTRAN and C. The software drivers and hardware were designed to minimize processor involvement in the data collection process, resulting in the capability to collect data while processing continues within the parent HLL. This design simplifies the HLL program structure and minimizes data collection dead time.

Estilos ABNT, Harvard, Vancouver, APA, etc.

41

Fan, Xian Guang, Yang Lu, Zhen Bang Hu e Ying Jie Xu. "Remote Data Acquisition and Transmission System Based on GPRS". Applied Mechanics and Materials 239-240 (dezembro de 2012): 577–81. http://dx.doi.org/10.4028/www.scientific.net/amm.239-240.577.

Texto completo da fonte

Resumo:

The paper introduces a design of wireless data acquisition and transmission terminal which takes Micro-controller ADuC848 as control center, combining with the Huawei GPRS/GSM wireless transmission module GTM900C. On the server computer designed GPRS data receiving software based on TCP/IP protocol. This system has succeeded in data acquisition and transmission in remote field. This paper describes the general scheme of the system from both hardware and software aspects and concretely introduces the method of remote data acquisition and transmission system, the final operation results of system are also given.

Estilos ABNT, Harvard, Vancouver, APA, etc.

42

Moynihan, Kelly J., Richard Proulx e Brian K. Windsor. "Acquisition and Analysis of Powder X-Ray Diffraction Data Using CALS Chromatographic Software". Powder Diffraction 1, n.º 3 (setembro de 1986): 222–25. http://dx.doi.org/10.1017/s088571560001174x.

Texto completo da fonte

Resumo:

AbstractA conventional semi-automated powder X-ray diffractometer that was previously equipped with a strip chart recorder for data acquisition has been interfaced to an HP 1000 minicomputer via an analog-to-digital converter. Data acquisition and analysis is now accomplished using CALS chromatographic software and two in-house-developed FORTRAN 77 computer programs. This has resulted in significant improvements in experimental repeatability and accuracy, decreased sample turn-around times, and rapid and facile analysis, manipulation, and comparison of crystallographic data.

Estilos ABNT, Harvard, Vancouver, APA, etc.

43

Yi, Mun Y., e Fred D. Davis. "Developing and Validating an Observational Learning Model of Computer Software Training and Skill Acquisition". Information Systems Research 14, n.º 2 (junho de 2003): 146–69. http://dx.doi.org/10.1287/isre.14.2.146.16016.

Texto completo da fonte

Estilos ABNT, Harvard, Vancouver, APA, etc.

44

Lee, Ming Gui, Xiang Kui Wan, Pei Bin Wang e Wen Jun Fan. "Design of Real-Time Detection Software System Oriented Press Mounting". Advanced Materials Research 711 (junho de 2013): 529–34. http://dx.doi.org/10.4028/www.scientific.net/amr.711.529.

Texto completo da fonte

Resumo:

The guide assembly procedure of the engine cylinder, design a software system for real-time monitoring to improve the engine performance. Used pressure sensor and AD acquisition card for acquisition and processing the pressure and displacement data; the software system for controlling and detecting ,which adopts mechanisms of multi-thread provided by Linux OS and programming techniques of Qt, is established on the computer, make the detection oriented press mounting; Completed the functional by modular design approach, the pressure and displacement data displayed as a curve and stored the diagnostic analysis results in database. Practice shows, the software system was proved to be stable working, easily operated, enhance efficiency greatly and guarantee the assembly quality.

Estilos ABNT, Harvard, Vancouver, APA, etc.

45

Foster, Margaret C., e Albert J. Saubermann. "Low-cost system for electron probe microanalysis based on a personal computer". Proceedings, annual meeting, Electron Microscopy Society of America 48, n.º 2 (12 de agosto de 1990): 158–59. http://dx.doi.org/10.1017/s0424820100134387.

Texto completo da fonte

Resumo:

The development of personal computers increases the options available for electron probe microanalysis. Hardware and software are now available for personal computers which make it feasible to use them to acquire, process, and analyze x-ray spectra. One advantage of a personal computer (PC) based system is the low cost--approximately 20% of the cost of other options. A second advantage is that a system can be developed which is tailored to the needs of the laboratory, so that experimental questions asked of the data can dictate procedures for data acquisition and processing.We have developed a PC-based system for electron probe microanalysis, which we use for data acquisition, processing, and analysis of frozen and freeze-dried biological samples. X-ray spectra may be acquired either for spot analysis or for elemental images. Spectra acquired from large areas of the frozen, hydrated sample are used together with spectra from the freeze-dried specimen to calculate concentrations relative to sample wet weight.

Estilos ABNT, Harvard, Vancouver, APA, etc.

46

Wautelet, Yves, Christophe Schinckus e Manuel Kolp. "Towards Knowledge Evolution in Software Engineering". International Journal of Information Technologies and Systems Approach 3, n.º 1 (janeiro de 2010): 21–40. http://dx.doi.org/10.4018/jitsa.2010100202.

Texto completo da fonte

Resumo:

This article presents an epistemological reading of knowledge evolution in software engineering (SE) both within a software project and into SE theoretical frameworks principally modeling languages and software development life cycles (SDLC). The article envisages SE as an artificial science and notably points to the use of iterative development as a more adequate framework for the enterprise applications. Iterative development has become popular in SE since it allows a more efficient knowledge acquisition process especially in user intensive applications by continuous organizational modeling and requirements acquisition, early implementation and testing, modularity,… SE is by nature a human activity: analysts, designers, developers and other project managers confront their visions of the software system they are building with users’ requirements. The study of software projects’ actors and stakeholders using Simon’s bounded rationality points to the use of an iterative development life cycle. The later, indeed, allows to better apprehend their rationality. Popper’s knowledge growth principle could at first seem suited for the analysis of the knowledge evolution in the SE field. However, this epistemology is better adapted to purely hard sciences as physics than to SE which also takes roots in human activities and by the way in social sciences. Consequently, we will nuance the vision using Lakatosian epistemology notably using his falsification principle criticism on SE as an evolving science. Finally the authors will point to adaptive rationality for a lecture of SE theorists and researchers’ rationality.

Estilos ABNT, Harvard, Vancouver, APA, etc.

47

Novo, João B. Marques, e Francisco B. T. Pessine. "Time-Resolved Luminescence Spectroscopy: Computer Interfacing and Software Development for a Boxcar-Based Laser-Luminescence Spectrometer". Applied Spectroscopy 47, n.º 12 (dezembro de 1993): 2044–51. http://dx.doi.org/10.1366/0003702934066280.

Texto completo da fonte

Resumo:

The undesirable resistance-capacitance (RC) distortion coming from the exponential moving averaging process of a boxcar integrator/averager acquisition system in kinetic and spectral luminescence measurements could be effectively eliminated by interfacing it to a microcomputer. Accurate acquisition of luminescence decay curves and time-resolved spectra was provided by a developed software that allows synchronous scan control of the gate delay time in the boxcar integrator with the emission wavelength in the monochromator. Some simple mathematical calculation routines, including excited-state lifetime extraction from luminescence decay curves and normalization of time-resolved spectra, were added. The main characteristics of both the software and the interfacing hardware are reported.

Estilos ABNT, Harvard, Vancouver, APA, etc.

48

Bao, Ze Fu, Peng Zang e Jiang Ping Wang. "Designing of Temperature and Thermal Displacement Measurement System in Machine Tools". Advanced Materials Research 308-310 (agosto de 2011): 1459–64. http://dx.doi.org/10.4028/www.scientific.net/amr.308-310.1459.

Texto completo da fonte

Resumo:

This paper describes the multi-sensor of the data acquisition and signal analyzing based on the development of virtual instrument. It sets up a virtual instrumentation with the function of data acquisition and signal analysis, based on computer, temperature sensor, displacement sensor, PCI data acquisition card, and software of LabVIEW8.5 .The data acquisition, preprocessing, displaying, storage and data playback? are integrated in this platform, forming an easy-to-use temperature and thermal error detection system.

Estilos ABNT, Harvard, Vancouver, APA, etc.

49

Maiorov, A. A., A. V. Materuhin e I. N. Kondaurov. "Using computer clusters for processing spatial-temporal data streams in data acquisition systems". Geodesy and Cartography 935, n.º 5 (20 de junho de 2018): 54–63. http://dx.doi.org/10.22389/0016-7126-2018-935-5-54-63.

Texto completo da fonte

Resumo:

Geoinformation technologies are now becoming “end-to-end” technologies of the new digital economy. There is a need for solutions for efficient processing of spatial and spatio-temporal data that could be applied in various sectors of this new economy. Such solutions are necessary, for example, for cyberphysical systems. Essential components of cyberphysical systems are high-performance and easy-scalable data acquisition systems based on smart geosensor networks. This article discusses the problem of choosing a software environment for this kind of systems, provides a review and a comparative analysis of various open source software environments designed for large spatial data and spatial-temporal data streams processing in computer clusters. It is shown that the software framework STARK can be used to process spatial-temporal data streams in spatial-temporal data streams. An extension of the STARK class system based on the type system for spatial-temporal data streams developed by one of the authors of this article is proposed. The models and data representations obtained as a result of the proposed expansion can be used not only for processing spatial-temporal data streams in data acquisition systems based on smart geosensor networks, but also for processing spatial-temporal data streams in various purposes geoinformation systems that use processing data in computer clusters.

Estilos ABNT, Harvard, Vancouver, APA, etc.

50

Liu, Ying Ji, Feng Tian Cai, Wei Zhou, Xue Li Zhang e Tian Xia Zhang. "An Engine Dynamic Signal Testing System Based on Virtual Instrument Technology". Applied Mechanics and Materials 16-19 (outubro de 2009): 193–98. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.193.

Texto completo da fonte

Resumo:

Aimed at the requirements of engine experimental research，a test system of engine dynamic signal was developed based on virtual instrument technology. The integral structure design of the system was given, the hardware is composed of sensors, signal conditioning module, high-speed data acquisition card and portable computer; the host computer software was developed with DASYLab, a virtual instrumentation tool. Its essential is to make good use of computer to achieve and extend functions of traditional instruments, by comprehensively using technologies of computer, digital signal processing, standard bus and software engineering method, functions of continuous multi channel sampling and multi type signal acquisition, and processing analysis were realized. The field test shows the system works reliably, development and application of this system can provide detailed experiment data and a new way in the field of engine power detection.

Estilos ABNT, Harvard, Vancouver, APA, etc.

Oferecemos descontos em todos os planos premium para autores cujas obras estão incluídas em seleções literárias temáticas. Contate-nos para obter um código promocional único!