Literatura científica selecionada sobre o tema "40~nm"
Crie uma referência precisa em APA, MLA, Chicago, Harvard, e outros estilos
Índice
Consulte a lista de atuais artigos, livros, teses, anais de congressos e outras fontes científicas relevantes para o tema "40~nm".
Ao lado de cada fonte na lista de referências, há um botão "Adicionar à bibliografia". Clique e geraremos automaticamente a citação bibliográfica do trabalho escolhido no estilo de citação de que você precisa: APA, MLA, Harvard, Chicago, Vancouver, etc.
Você também pode baixar o texto completo da publicação científica em formato .pdf e ler o resumo do trabalho online se estiver presente nos metadados.
Artigos de revistas sobre o assunto "40~nm"
Durkan, C., e I. V. Shvets. "40 nm resolution in reflection-mode SNOM with λ = 685 nm". Ultramicroscopy 61, n.º 1-4 (dezembro de 1995): 227–31. http://dx.doi.org/10.1016/0304-3991(95)00114-x.
Texto completo da fontePezeshki, B., M. Zelinski, H. Zhao e V. Agrawal. "40-mW 650-nm distributed feedback lasers". IEEE Photonics Technology Letters 10, n.º 1 (janeiro de 1998): 36–38. http://dx.doi.org/10.1109/68.651093.
Texto completo da fonteOno, M., M. Saito, T. Yoshitomi, C. Fiegna, T. Ohguro e H. Iwai. "A 40 nm gate length n-MOSFET". IEEE Transactions on Electron Devices 42, n.º 10 (1995): 1822–30. http://dx.doi.org/10.1109/16.464413.
Texto completo da fontePark, Chaeeun, e Munkyo Seo. "A 140 GHz Low-Noise Amplifier in 40 nm CMOS". Journal of Korean Institute of Electromagnetic Engineering and Science 33, n.º 4 (abril de 2022): 312–17. http://dx.doi.org/10.5515/kjkiees.2022.33.4.312.
Texto completo da fonteWandt, D., M. Laschek, K. Przyklenk, A. Tünnermann e H. Welling. "External cavity laser diode with 40 nm continuous tuning range around 825 nm". Optics Communications 130, n.º 1-3 (setembro de 1996): 81–84. http://dx.doi.org/10.1016/0030-4018(96)00171-x.
Texto completo da fonteZaghib, Karim, Alain Mauger, Monika Kopec, Francois Gendron e C. M. Julien. "Intrinsic Properties of 40 nm-sized LiFePO4 Particles". ECS Transactions 16, n.º 42 (18 de dezembro de 2019): 31–41. http://dx.doi.org/10.1149/1.3112726.
Texto completo da fonteAppenzeller, J., R. Martel, Ph Avouris, J. Knoch, J. Scholvin, J. A. del Alamo, P. Rice e P. Solomon. "Sub-40 nm SOI V-groove n-MOSFETs". IEEE Electron Device Letters 23, n.º 2 (fevereiro de 2002): 100–102. http://dx.doi.org/10.1109/55.981319.
Texto completo da fonteHomulle, Harald, Fabio Sebastiano e Edoardo Charbon. "Deep-Cryogenic Voltage References in 40-nm CMOS". IEEE Solid-State Circuits Letters 1, n.º 5 (maio de 2018): 110–13. http://dx.doi.org/10.1109/lssc.2018.2875821.
Texto completo da fonteHofmann, W., M. Müller, P. Wolf, A. Mutig, T. Gründl, G. Böhm, D. Bimberg e M. C. Amann. "40 Gbit/s modulation of 1550 nm VCSEL". Electronics Letters 47, n.º 4 (2011): 270. http://dx.doi.org/10.1049/el.2010.3631.
Texto completo da fonteTakeuchi, Issei, Yosuke Shimamura, Yuki Kakami, Tsunenori Kameda, Keitaro Hattori, Seiji Miura, Hiroyuki Shirai et al. "Transdermal delivery of 40-nm silk fibroin nanoparticles". Colloids and Surfaces B: Biointerfaces 175 (março de 2019): 564–68. http://dx.doi.org/10.1016/j.colsurfb.2018.12.012.
Texto completo da fonteTeses / dissertações sobre o assunto "40~nm"
Hubert, Quentin. "Optimisation de mémoires PCRAM pour générations sub-40 nm : intégration de matériaux alternatifs et structures innovantes". Phd thesis, Université de Grenoble, 2013. http://tel.archives-ouvertes.fr/tel-01061795.
Texto completo da fonteKromer, Christian. "10 Gb/s to 40 Gb/s receiver for high-density optic interconnects in 80-nm CMOS /". Zürich : ETH, 2006. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=16347.
Texto completo da fonteShu, Ran [Verfasser], Georg [Akademischer Betreuer] Böck e Reinhold [Akademischer Betreuer] Orglmeister. "Analysis and design of 40 GHz frequency generation circuits in 90 nm CMOS technology / Ran Shu. Gutachter: Reinhold Orglmeister. Betreuer: Georg Böck". Berlin : Technische Universität Berlin, 2014. http://d-nb.info/1065669682/34.
Texto completo da fonteLecat-Mathieu, de Boissac Capucine. "Developing radiation-hardening solutions for high-performance and low-power systems". Electronic Thesis or Diss., Aix-Marseille, 2021. http://www.theses.fr/2021AIXM0413.
Texto completo da fonteNew actors have accelerated the pace of putting new satellites into orbit, and other domains like the automotive industry are at the origin of this development. These new actors rely on advanced technologies, such as UTBB FD-SOI in order to be able to achieve the necessary performance to accomplish the tasks. Albeit disruptive in terms of intrinsic soft-error resistance, the growing density and complexity of spaceborne and automotive systems require an accurate characterization of technologies, as well as an adaptation of traditional hardening techniques. This PhD focuses on the study of radiation effects in advanced FD-SOI and bulk silicon processes, and on the research of innovative protection mechanisms. A custom, self-calibrating transient measurements structure with automated design flow is first presented, allowing for the characterization of four different technologies during accelerated tests. The soft-error response of 28~nm FD-SOI and 40~nm bulk logic and storage cells is then assessed through beam testing and with the help of TCAD simulations, allowing to study the influence of voltage, frequency scaling and the application of forward body biasing on sensitivity. Total ionizing dose is also investigated through the use of an on-chip monitoring block. The test results are then utilized to propose a novel hardening solution for system on chip, which gathers the monitoring structures into a real-time radiation environment assessment and a power management unit for power mode adjustments. Finally, as an extension of the SET sensors capability, an implementation of radiation monitors in a context of secure systems is proposed to detect and counteract laser attacks
Wang, Chun, e 王淳. "A 100-GHz Power Amplifier Design in 40-nm CMOS Process". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/12539437183740398588.
Texto completo da fonte國立中央大學
電機工程學系
105
This thesis proposes a 100-GHz power amplifier design in TSMC 40-nm CMOS process. The power amplifier applies to the 200-GHz transmitter circuit. To avoid braking the next stage circuit, the power amplifier does not add the power combiner design which is designed for increasing the output power. The first part is the basic theories related to the design of power amplifiers, including the DC bias point of transistor and the load line theory. The second part is the design of the 100-GHz two stage power amplifiers. The common source mode is chosen in this design for its high gain characteristic. To increase the stability and gain , the cross couple capacitors is added for resonating the parasitic capacitors of the transistors. The transformers in this power amplifier are worked as the impedance matching network and balun. The power amplifier exhibits saturation output power of 9.49 dBm, maximum power-added efficiency (PAE) of 6.95%, and the output power at 1-dB gain compression point of 7.42 dBm. The 3-dB bandwidths is 31%. The third part is the design of the 200-GHz transmitter. This circuit consists of a voltage control oscillator (VCO), a driver amplifier, a power amplifier, a doubler, and an ASK modulator. The VCO generates the 100-GHz signal, and then it gets enough output power by driver amplifier and power amplifier. The operating frequency will be raised up to 200-GHz by doubler. The signal will be modulated with a digital data signal by ASK modulator in the end. This transmitter provides output power of -0.95 dBm and a data rate of 20 Gb/s at 200 GHz.
Lin, Chen-Lun, e 林振倫. "A 40-Gb/s Wireline Backplane Receiver in 65-nm CMOS Technology". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/83437373053440643737.
Texto completo da fonte國立臺灣大學
電子工程學研究所
101
In this thesis, a 40-Gb/s receiver has been implemented in 65-nm CMOS technology, which composed of three critical components of a wireline backplane receiver – an analog equalizer, a clock and data recovery circuit (CDR), and a demultiplexer (DMUX). The analog equalizer consists of two gain stages and two filter stages, totally providing at most 14.9-dB boosting and 4.8-dB dc gain. It compensates sufficiently for the loss of the 5-cm channel on a Rogers board, and has a 35-mV input sensitivity. The following is a 40-Gb/s full-rate CDR, constructed with a linear phase detector (PD) and a frequency detector (FD) without an external reference clock. Both the PD and the FD operate only with the data signal and the clock signal from the voltage-controlled oscillator (VCO), and thus detect the phase error and the frequency error automatically. The last part of the receiver is a DMUX. Like most typical structures, this DMUX is implemented with flip-flops to sample the desired output data. Further, in this design, the 40-Gb/s data is sampled by the quarter-rate clock signal and thus the DMUX produces the 10-Gb/s data signal. This circuit occupies 1.1 × 1 mm^2 including pads, consumes 427 mW from a 1.2-V supply, and achieves BER < 10^-12 for 2^31 – 1 PRBS.
Wang, Tai-sheng, e 王泰盛. "Lead Free Bump Assembly Material and Structure Study for 40 nm Wafer Technology". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/94066162279246754576.
Texto completo da fonte國立中山大學
機械與機電工程學系研究所
98
Solder bump is used to connect organic substrate with chip to form Flip Chip package. Comparing to wire bond package, the path is reduced so the electrical performance is much better. Due to the environmental concern, eutectic bump is replaced by lead-free bump gradually. Meanwhile, since wafer technology is improved from 55 nm to 40 nm, the material for dielectric layers is also changed so the material for the package need to revised to meet the characteristic of wafer. Now the laser grooving is adopted before blade sawing to accommodate the brittleness of new 40nm wafer. Also, one extra polyimide is added in the wafer fabrication to reinforce the robustness of the circuit. The stress inside the lead-free bump can be reduced by optimizing the temperature of the reflow process and the speed of cooling. Different UBM structure is also reviewed to find out its affect on the strength of bump and low-K circuit so the failure mode of bump can be predicted. The selection of underfill need to be well considered so, the warpage of package can be reduced, the maximum protection of bump and low-K circuit can be achieved, and the process is easier to control. (The four underfills are reviewed) The reliability test is utilized to decide the best bump composition, the structure of UBM, the selection of underfills and the process parameter. By adding the laser grooving in the wafer sawing process, the chance of crack on die low-K layer is reduced during the reliability test. As for the UBM structure, the POU is better than RPI to reduce the crack of die low-K layer. The result is verified on the package with no underfill by Temperature cycle. Last, the matching of SnCu0.7 bump with SAC305 C4 pad has the best result. During the research, the variance of CTE for the core of substrate contributes less warpage of package, comparing to the difference of Tg for underfills. The adhesion of underfills varies and the underfill UA9 has the best result. The flip chip package with underfill UA9 can passes TCB1000. The optimization of UBM structure for lead-free bump is researched and discussed. Composition of the lead-free bump, process parameter, and cost, those factors are also studied.
Lo, Chi-Kuang, e 羅啟光. "Design of A Fast Lock-In All-Digital Phase-Locked Loop in 40-nm CMOS Technology". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/3aq725.
Texto completo da fonte國立中正大學
資訊工程研究所
103
In recent years, biomedical electronic applications, spread-spectrum clock generators, implantable medical devices, and frequency hopping wireless applications are widely used in system-on-a-chip (SoC). In an SoC, it requires different clock sources for different I/O interfaces. Thus, phase-locked loops play an important role in SoC in order to generate different clock sources. Besides, the primary concern of these applications are low energy and low cost. While the operation voltage is scaling down with the latest CMOS process, analog PLLs encounter great design challenges. According to time to market, in order to minimize the design time and the design efforts, all-digital phase-locked loops (ADPLLs) are adopted in digital design approaches. In addition, ADPLLs implemented with standard cells can not only speed up the design time, but also improve the portability. As compared with analog PLLs, ADPLLs are more suitable for SoC Analog PLLs are usually not to be stopped due to the long lock-in time. When the system is in sleeping mode, the PLL power consumption dominates the standby power consumption of the system. Therefore, if PLLs can lock the frequency and phase quickly, the lock-in time can be reduced so that PLLs can be turned off in low power modes. As a result, fast lock-in ADPLLs become more and more popular. Therefore, in this thesis, we proposed a fast lock-in ADPLL with a calibration method in order to decrease the chip area and improve the accuracy in frequency estimation. In addition, the test chip is implemented and verified in TSMC 40-nm CMOS process with standard cells.
Liu, Chin-Tang, e 劉欽堂. "Yield Improvement of 40 nm NAND Flash Technology by Using a CHF3 Free Dry Etching Process". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/99418420112926166960.
Texto completo da fonte國立暨南國際大學
光電科技碩士學位學程在職專班
102
Semiconductor industry is new advance of industry , The semiconductor pace of development is very fast in recent years , As Moore’s law forecast , component size changed smaller gradually by produce that the integrated circuit process technology also complex now . For upgrade capacity of computer , communication and consumer electronics products with pursue cost lower of wafer unit , so electronic components produced smaller as complementary metal –oxide -semiconductor:CMOS which the target in the future . For component smaller that process also using by SiO2 as gate dielectric , in 45 nm and 32 nm of sub-nanometer process that the thickness must be lower 1 nm for component spec , also component between from peripheral and cell of contact hole critical dimension , CD must be smaller , but according to process requirement not cause thin film reduce too much , and depth also the same by etching , therefore , the process cause contact hole of critical dimension , CD smaller that wire problem un-open and punch .etc easier, the issue create a big challenge in etching process . This paper is talking about yield improvement of 40 nm NAND flash technology by using a CHF3 free dry etching process. It’s about an equipment of Applied etch which uses Reactive Ion Etching to adjust different parameters by CHF3 free dry etching process that the etch could get the better Etch profile to solve the problems for Critical Dimension,CD , such as WC/WE uniformity. Besides, it also get the better defect performance and yield improvement.
Cheng, Chia-Kai, e 鄭家凱. "A 1/2.5-Rate Clock and Data Recovery Circuit for 100Gb/s Ethernet in 40 nm Technology". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/42045406149607511904.
Texto completo da fonte國立臺灣大學
電子工程學研究所
104
In June, 2010, IEEE P802.3ba is generated officially. It defines the specification of 40GbE and 100GbE. The purpose is to extend the operation speed of the IEEE 802.3 agreement to 40Gbps and 100Gbps, and at the same time it also accords the current agreement and the demand of the transmission distance. At the definition of IEEE P802.3ba, the 100GbE is used four channels of 25Gbps output of with wavelength division multiplexing to achieve the purpose of high speed transmission. At optical communication systems, since the cost of the transmission line channel is very expensive, in order to reduce the cost, we usually hope we can transmit higher frequency data in single channel. At the 100GbE receiver system, we need to deserialize four channel 25Gbps signal into ten channel 10Gbps. Unlike the conventional power of 2 deserializer, the 2:5 data ratio would suffer from more complicate design, and consume more area and have more power dissipation. A 1/2.5-rate clock and data recovery (CDR) circuit is proposed in this thesis. We can deserialize the signal without 2:5 deserializer to reduce the hardware resource. This CDR is implemented in TSMC 40nm CMOS technology. At 1V power supply, it only consumes 51.5mW/Channel.
Livros sobre o assunto "40~nm"
Ruppé, Patricia A. Prehistoric households along the Chuska slope: Phase III data recovery at five sites (NM-H-49-98 [LA 107461], NM-H-50-112 [LA 107466], NM-H-50-113 [LA 107467], NM-H-46-40 [LA 115884], and NM-H-46-35 [LA 7551]), along Navajo Route N500(1), Toadlena to Newcomb, San Juan County, New Mexico. Zuni, N.M: Zuni Cultural Resource Enterprise, 2000.
Encontre o texto completo da fonteRuppé, Patricia A. Prehistoric households along the Chuska slope: Phase III data recovery at five sites (NM-H-49-98 [LA 107461], NM-H-50-112 [LA 107466], NM-H-50-113 [LA 107467], NM-H-46-40 [LA 115884], and NM-H-46-35 [LA 7551]), along Navajo Route N500(1), Toadlena to Newcomb, San Juan County, New Mexico. Zuni, N.M: Zuni Cultural Resource Enterprise, 2000.
Encontre o texto completo da fonte10 Gb/s to 40 Gb/s receiver for high-density optical interconnects in 80-nm CMOS. Konstanz: Hartung-Gorre, 2006.
Encontre o texto completo da fonteTransportation Safety Board of Canada. Engine power loss in flight, Cathay Pacific Airways, Airbus A340-300 B-HXN, Timmins, Ontario, 40 nm W, 20 October 2002. Gatineau, Qué: Transportation Safety Board, 2004.
Encontre o texto completo da fonteTransportation Safety Board of Canada. Engine power loss in flight, Cathay Pacific Airways, Airbus A340-300 B-HXN, Timmins, Ontario, 40 nm W, 20 October 2002. [Gatineau, Québec]: TSB, 2005.
Encontre o texto completo da fonteDello-Russo, Robert D. Results of data recovery efforts at sites LA 109307 (NM-T-28-03) and LA 109309 (NM-T-28-05) and nature and extent testing efforts at site LA 115306 (NM-T-28-10) along Navajo route N55(1), Alamo Navajo Reservation to U.S. Interstate 40, Socorro County, New Mexico. Zuni, N.M: Pueblo of Zuni Cultural Resource Enterprise, 1999.
Encontre o texto completo da fonteCanada, Bureau de la sécurité des transports du. Perte de puissance moteur de l'Airbus A340-300 B-HXN exploité par Cathay Pacific Airways à 40 nm à l'ouest de Timmins (Ontario), le 20 octobre 2002. Gatineau, Qué: Bureau de la sécurité des transports du Canada, 2004.
Encontre o texto completo da fonteAraújo, Ana Cláudia Vaz de. Síntese de nanopartículas de óxido de ferro e nanocompósitos com polianilina. Brazil Publishing, 2021. http://dx.doi.org/10.31012/978-65-5861-120-2.
Texto completo da fonteCapítulos de livros sobre o assunto "40~nm"
Khalaf, Khaled, Vojkan Vidojkovic, John R. Long e Piet Wambacq. "Digitally-Modulated Polar Transmitters in 40 nm CMOS". In Low-Power Millimeter Wave Transmitters for High Data Rate Applications, 55–96. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-16653-3_4.
Texto completo da fonteMoudgil, Aditi, e Jaiteg Singh. "LVCMOS-Based Frequency-Specific Processor Design on 40-nm FPGA". In Advances in Intelligent Systems and Computing, 513–19. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3373-5_51.
Texto completo da fonteToyoda, M., Y. Tamaru, S. Mori, K. Sawada, Y. Fu, E. J. Takahashi, A. Suda, F. Kannari, K. Midorikawa e M. Yanagihara. "Multilayer Mirrors for Focusing Objective in 40-nm Wavelength Region". In Springer Proceedings in Physics, 287–90. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73025-7_42.
Texto completo da fonteRadulov, Georgi, Patrick Quinn, Hans Hegt e Arthur van Roermund. "A 16 bit 16-core Flexible 40 nm DAC Platform". In Smart and Flexible Digital-to-Analog Converters, 269–89. Dordrecht: Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-0347-6_19.
Texto completo da fonteTan, Hongbing, Haiyan Chen, Sheng Liu, Xikun Ma e Yaqing Chi. "A Programmable Pre-emphasis Transmitter for SerDes in 40 nm CMOS". In Communications in Computer and Information Science, 35–44. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-7844-6_4.
Texto completo da fonteWen, Liang, Zhentao Li e Yong Li. "A Comparison Analysis of Single-Ended Bit-Line Leakage Reduction Techniques at 40 nm Node". In Lecture Notes in Electrical Engineering, 1761–69. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-4981-2_193.
Texto completo da fonteKaithal, Poonam, Rajiv Kant, Rohit Lall, Archana Verma e Preetam Verma. "Green Synthesis of Silver Nanoparticles from Madhuca longifolia and Its Antibiofilm Potential". In Proceedings of the Conference BioSangam 2022: Emerging Trends in Biotechnology (BIOSANGAM 2022), 156–67. Dordrecht: Atlantis Press International BV, 2022. http://dx.doi.org/10.2991/978-94-6463-020-6_16.
Texto completo da fonteAggarwal, Arushi, Bishwajeet Pandey, Sweety Dabbas, Achal Agarwal e Siddharth Saurabh. "Stub Series Terminal Logic-Based Low-Power Thermal-Aware Vedic Multiplier Design on 40-nm FPGA". In System and Architecture, 107–13. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8533-8_11.
Texto completo da fonteNuyts, Pieter A. J., Patrick Reynaert e Wim Dehaene. "A 40-nm CMOS Fully Digital Reconfigurable Transmitter with Class-D PAs Using Baseband and RF PWM". In Continuous-Time Digital Front-Ends for Multistandard Wireless Transmission, 219–54. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-03925-1_6.
Texto completo da fonteIlakal, Anand, e Anuj Grover. "Comparison of SRAM Cell Layout Topologies to Estimate Improvement in SER Robustness in 28FDSOI and 40 nm Technologies". In Communications in Computer and Information Science, 414–20. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-7470-7_41.
Texto completo da fonteTrabalhos de conferências sobre o assunto "40~nm"
Pellegrini, S., B. Rae, A. Pingault, D. Golanski, S. Jouan, C. Lapeyre e B. Mamdy. "Industrialised SPAD in 40 nm technology". In 2017 IEEE International Electron Devices Meeting (IEDM). IEEE, 2017. http://dx.doi.org/10.1109/iedm.2017.8268404.
Texto completo da fontePsycharis, Ioannis Dimitrios, e Grigorios Kalivas. "A 40 GHz Low Phase Noise VCO in 40 nm CMOS". In 2022 Panhellenic Conference on Electronics & Telecommunications (PACET). IEEE, 2022. http://dx.doi.org/10.1109/pacet56979.2022.9976322.
Texto completo da fonteWang, Huei, Yuan-Hung Hsiao, Kuang-Sheng Yeh, Yu-Ting Chou, Jun-Kai Wang e Yu-Hsuan Lin. "Millimeter-wave amplifiers in 40-nm CMOS". In 2016 Asia-Pacific Microwave Conference (APMC). IEEE, 2016. http://dx.doi.org/10.1109/apmc.2016.7931345.
Texto completo da fonteKim, Dae-Hyun, e Jesus A. del Alamo. "Logic Performance of 40 nm InAs HEMTs". In 2007 IEEE International Electron Devices Meeting. IEEE, 2007. http://dx.doi.org/10.1109/iedm.2007.4419018.
Texto completo da fonteTanaka, Yuusuke, Takao Tamura, Masashi Fujimoto, Kyoichi Tsubata, Naka Onoda e Kiyoshi Fujii. "Flare management for 40-nm logic devices". In SPIE Advanced Lithography, editado por Will Conley. SPIE, 2013. http://dx.doi.org/10.1117/12.2010082.
Texto completo da fonteLi, Lianming, e Tianze Wu. "A 40-nm CMOS 90-GHz Power Amplifier". In 2019 3rd International Conference on Circuits, System and Simulation (ICCSS). IEEE, 2019. http://dx.doi.org/10.1109/cirsyssim.2019.8935610.
Texto completo da fonteHo, Jonathan, Yan Wang e Benjamin Lin. "Test structures for 40 nm design rule evaluation". In SPIE Advanced Lithography, editado por Vivek K. Singh e Michael L. Rieger. SPIE, 2009. http://dx.doi.org/10.1117/12.813448.
Texto completo da fonteEdgecumbe, John P., Verle W. Aebi e Gary A. Davis. "GaAsP photocathode with 40% QE at 550 nm". In SPIE/IS&T 1992 Symposium on Electronic Imaging: Science and Technology, editado por C. Bruce Johnson e Bruce N. Laprade. SPIE, 1992. http://dx.doi.org/10.1117/12.60336.
Texto completo da fonteYeo, Jeongho, Hoyeon Kim e Ben Eynon. "Full-field imprinting of sub-40 nm patterns". In SPIE Advanced Lithography, editado por Frank M. Schellenberg. SPIE, 2008. http://dx.doi.org/10.1117/12.775115.
Texto completo da fonteMachinet, Guillaume, Jérôme Lhermite e Eric Cormier. "40 W picosecond fiber laser at 976 nm". In CLEO: Science and Innovations. Washington, D.C.: OSA, 2011. http://dx.doi.org/10.1364/cleo_si.2011.cms2.
Texto completo da fonteRelatórios de organizações sobre o assunto "40~nm"
Weissinger, Rebecca. Evaluation of hanging-garden endemic-plant monitoring at Southeast Utah Group national parks, 2013–2020. Editado por Alice Wondrak Biel. National Park Service, outubro de 2022. http://dx.doi.org/10.36967/2294868.
Texto completo da fonte