Gotowe bibliografie tematyczne / Zn-air battery

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Części książek
  4. Streszczenia konferencji

Gotowa bibliografia na temat „Zn-air battery”

Autor: Grafiati
Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Zn-air battery”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Zn-air battery"

1

Chen, Jianping, Bangqing Ni, Jiugang Hu, Zexing Wu i Wei Jin. "Defective graphene aerogel-supported Bi–CoP nanoparticles as a high-potential air cathode for rechargeable Zn–air batteries". Journal of Materials Chemistry A 7, nr 39 (2019): 22507–13. http://dx.doi.org/10.1039/c9ta07669g.

Pełny tekst źródła
Streszczenie:
Bi–CoP nanoparticles supported on N, P doped defective graphene aerogel (Bi–CoP–P-DG) electrocatalyst presents excellent catalytic performances for OER, ORR and Zn–air battery. Moreover, the home-made Zn–air battery can drive overall water-splitting.
Style APA, Harvard, Vancouver, ISO itp.
2

Katsaiti, Maria, Evangelos Papadogiannis, Vassilios Dracopoulos, Anastasios Keramidas i Panagiotis Lianos. "Solar charging of a Zn-air battery". Journal of Power Sources 555 (styczeń 2023): 232384. http://dx.doi.org/10.1016/j.jpowsour.2022.232384.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Song, Dongmei, Changgang Hu, Zijian Gao, Bo Yang, Qingxia Li, Xinxing Zhan, Xin Tong i Juan Tian. "Metal–Organic Frameworks (MOFs) Derived Materials Used in Zn–Air Battery". Materials 15, nr 17 (24.08.2022): 5837. http://dx.doi.org/10.3390/ma15175837.

Pełny tekst źródła
Streszczenie:
It is necessary to develop new energy technologies because of serious environmental problems. As one of the most promising electrochemical energy conversion and storage devices, the Zn–air battery has attracted extensive research in recent years due to the advantages of abundant resources, low price, high energy density, and high reduction potential. However, the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) of Zn–air battery during discharge and charge have complicated multi-electron transfer processes with slow reaction kinetics. It is important to develop efficient and stable oxygen electrocatalysts. At present, single-function catalysts such as Pt/C, RuO2, and IrO2 are regarded as the benchmark catalysts for ORR and OER, respectively. However, the large-scale application of Zn–air battery is limited by the few sources of the precious metal catalysts, as well as their high costs, and poor long-term stability. Therefore, designing bifunctional electrocatalysts with excellent activity and stability using resource-rich non-noble metals is the key to improving ORR/OER reaction kinetics and promoting the commercial application of the Zn–air battery. Metal–organic framework (MOF) is a kind of porous crystal material composed of metal ions/clusters connected by organic ligands, which has the characteristics of adjustable porosity, highly ordered pore structure, low crystal density, and large specific surface area. MOFs and their derivatives show remarkable performance in promoting oxygen reaction, and are a promising candidate material for oxygen electrocatalysts. Herein, this review summarizes the latest progress in advanced MOF-derived materials such as oxygen electrocatalysts in a Zn–air battery. Firstly, the composition and working principle of the Zn–air battery are introduced. Then, the related reaction mechanism of ORR/OER is briefly described. After that, the latest developments in ORR/OER electrocatalysts for Zn–air batteries are introduced in detail from two aspects: (i) non-precious metal catalysts (NPMC) derived from MOF materials, including single transition metals and bimetallic catalysts with Co, Fe, Mn, Cu, etc.; (ii) metal-free catalysts derived from MOF materials, including heteroatom-doped MOF materials and MOF/graphene oxide (GO) composite materials. At the end of the paper, we also put forward the challenges and prospects of designing bifunctional oxygen electrocatalysts with high activity and stability derived from MOF materials for Zn–air battery.
Style APA, Harvard, Vancouver, ISO itp.
4

Okobira, Tatsuya, Dang-Trang Nguyen i Kozo Taguchi. "Effectiveness of doping zinc to the aluminum anode on aluminum-air battery performance". International Journal of Applied Electromagnetics and Mechanics 64, nr 1-4 (10.12.2020): 57–64. http://dx.doi.org/10.3233/jae-209307.

Pełny tekst źródła
Streszczenie:
Many efforts have been devoted to the improvement of metal-air batteries. Aluminum (Al) is the most abundant metal in the Earth’s crust and has high electrochemical potential. Therefore, the aluminum-air battery is one of the most attractive metal-air batteries. To overcome some disadvantages of the aluminum-air battery, some alloys of aluminum and several metals have been proposed. In this study, the performance improvement of the aluminum-air battery by doping zinc (Zn) to the aluminum anode was investigated. Zinc was doped to aluminum by a simple process. The difference in the characteristics of Zn-doped Al due to different heating temperature during the doping process was also investigated. The maximum power density of the battery was 2.5 mW/cm2.
Style APA, Harvard, Vancouver, ISO itp.
5

Mohamad, A. A. "Zn/gelled 6M KOH/O2 zinc–air battery". Journal of Power Sources 159, nr 1 (wrzesień 2006): 752–57. http://dx.doi.org/10.1016/j.jpowsour.2005.10.110.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Wang, Yueyang, Jie Liu, Yuping Feng, Ningyuan Nie, Mengmeng Hu, Jiaqi Wang, Guangxing Pan, Jiaheng Zhang i Yan Huang. "An intrinsically stretchable and compressible Zn–air battery". Chemical Communications 56, nr 35 (2020): 4793–96. http://dx.doi.org/10.1039/d0cc00823k.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Deyab, M. A., i G. Mele. "Polyaniline/Zn-phthalocyanines nanocomposite for protecting zinc electrode in Zn-air battery". Journal of Power Sources 443 (grudzień 2019): 227264. http://dx.doi.org/10.1016/j.jpowsour.2019.227264.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Feng, Yunxiao, Changdong Chen, Yanling Li, Ming La i Yongjun Han. "Zn/CoP polyhedron as electrocatalyst for water splitting and Zn-air battery". International Journal of Electrochemical Science 18, nr 6 (czerwiec 2023): 100153. http://dx.doi.org/10.1016/j.ijoes.2023.100153.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Marsudi, Maradhana Agung, Yuanyuan Ma, Bagas Prakoso, Jayadi Jaya Hutani, Arie Wibowo, Yun Zong, Zhaolin Liu i Afriyanti Sumboja. "Manganese Oxide Nanorods Decorated Table Sugar Derived Carbon as Efficient Bifunctional Catalyst in Rechargeable Zn-Air Batteries". Catalysts 10, nr 1 (1.01.2020): 64. http://dx.doi.org/10.3390/catal10010064.

Pełny tekst źródła
Streszczenie:
Despite its commercial success as a primary battery, Zn-air battery is struggling to sustain a reasonable cycling performance mainly because of the lack of robust bifunctional electrocatalysts which smoothen the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) taking place on its air-cathode. Composites of carbon/manganese oxide have emerged as a potential solution with high catalytic performance; however, the use of non-renewable carbon sources with tedious and non-scalable synthetic methods notably compromised the merit of being low cost. In this work, high quantity of carbon is produced from renewable source of readily available table sugar by a facile room temperature dehydration process, on which manganese oxide nanorods are grown to yield an electrocatalyst of MnOx@AC-S with high oxygen bifunctional catalytic activities. A Zn-air battery with the MnOx@AC-S composite catalyst in its air-cathode delivers a peak power density of 116 mW cm−2 and relatively stable cycling performance over 215 discharge and charge cycles. With decent performance and high synthetic yield achieved for the MnOx@AC-S catalyst form a renewable source, this research sheds light on the advancement of low-cost yet efficient electrocatalyst for the industrialization of rechargeable Zn-air battery.
Style APA, Harvard, Vancouver, ISO itp.
10

Deiss, E., F. Holzer i O. Haas. "Modeling of an electrically rechargeable alkaline Zn–air battery". Electrochimica Acta 47, nr 25 (wrzesień 2002): 3995–4010. http://dx.doi.org/10.1016/s0013-4686(02)00316-x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Zn-air battery"

1

Hsu, Shih-Hua, i 許世華. "A study of zinc corrosion and electrodeposition- properties of Zn-Ni battery and Zn-Air battery". Thesis, 2001. http://ndltd.ncl.edu.tw/handle/80962084659440947996.

Pełny tekst źródła
Streszczenie:
碩士
國立清華大學
材料科學工程學系
89
Because zinc has high energy capacity and very cheap, we focus on its application for secondary battery in recent years. But there are some disadvantages for zinc electrode on actual application such as: zinc corrosion in concentrated alkaline solutions and zinc oxide produced after discharging dissolved in electrolyte, it will lower energy capacity. The purpose of this study is to discuss zinc corrosion while using electrolyte which was made by 5M,6M and 7M concentrated potassium hydroxide solution and some additives :EDTA, poly ethylene glycol(PEG)200, poly ethylene glycol(PEG)300 and poly ethylene glycol(PEG)600 etc. The negative electrodes using in testing cycle life of battery were made by electrodeposition and the electrolytes were the same as using in zinc corrosion. We expect our electrolyte has two function of preventing zinc corrosion and maintaining discharge capacity. Our result shows that higher average molecule weight of poly ethylene glycol has better preventing zinc corrosion. After a series of cycle life testing, it shows that 0.8%wt EDTA and 0 .2%wt poly ethylene glycol (600) added in 6M concentrated potassium hydroxide solution saturated by zinc oxide has good performance for maintaining high discharge capacity. We put zinc electrode which is made by electrodeposition in 6M concentrated potassium hydroxide solution saturated by zinc oxide and added by 0.8%wt EDTA and 0 .2%wt poly ethylene glycol (600) in some different conditions, charged by several current 100mA, 200mA and 300mA and discharged by the same current, 0.15A, in order to find out the suitable condition for cycling. It shows that higher charging current has better performance for keeping discharge capacity. Finally, we use zinc electrode which is made by electrodeposition in zinc-air battery application, it has discharge capacity, 573mAh/g. For testing polarization on zinc-air battery, we change some different constant discharge current, 1mA, 5mA, 10mA and 20mA to measuring the effects of battery voltage.
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Zn-air battery"

1

Peng, Shengjie. "Electrolyte of Zn-Air Battery". W Zinc-Air Batteries, 175–89. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8214-9_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Peng, Shengjie. "Anode of Zn-Air Battery". W Zinc-Air Batteries, 157–73. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8214-9_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Peng, Shengjie, i P. Robert Ilango. "Electrospinning of Nanofibers for Zn-Air Battery". W Electrospinning of Nanofibers for Battery Applications, 121–39. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1428-9_6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Liu, Yiyang, Tasnim Munshi, Jennifer Hack, Ian Scowen, Paul R. Shearing, Guanjie He i Dan J. L. Brett. "Biowaste-Derived Components for Zn–Air Battery". W Energy from Waste, 313–28. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003178354-25.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Wu, Mingjie, Gaixia Zhang, Hariprasad Ranganathan i Shuhui Sun. "Zn-Air Battery Application of Atomically Dispersed Metallic Materials". W Atomically Dispersed Metallic Materials for Electrochemical Energy Technologies, 209–37. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003153436-6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Zhang, Lei, Yuan-Xin Zhu i Guang-Zhi Hu. "MOFs-derived hollow structure as a versatile platform for highly-efficient multifunctional electrocatalyst toward overall water-splitting and Zn-air battery". W Nanomaterials for Electrocatalysis, 251–70. Elsevier, 2022. http://dx.doi.org/10.1016/b978-0-323-85710-9.00004-6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Zn-air battery"

1

Makyeyeva, I. S., i A. S. Katashinskii. "MnO2 nanoparticles as a catalyst for the air electrode of a Zn/air battery". W 2017 IEEE 7th International Conference "Nanomaterials: Application & Properties" (NAP). IEEE, 2017. http://dx.doi.org/10.1109/nap.2017.8190235.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Alcázar, Héctor B. Sierra, i Phu D. Nguyen. "Additives to Increase the Discharge Capacity of the Moving Bed Zn/Air Battery". W 22nd Intersociety Energy Conversion Engineering Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 1987. http://dx.doi.org/10.2514/6.1987-9397.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Mahbub, Muhammad Adib Abdillah, Anggraeni Mulyadewi, Celfi Gustine Adios i Afriyanti Sumboja. "Sustainable chicken manure-derived carbon as a metal-free bifunctional electrocatalyst in Zn-air battery". W THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL AND TECHNOLOGY (ICAMT) 2021. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0106289.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Zamri, S. N. A. M., M. N. Masri, M. H. Hussin, W. M. I. W. Ismail i M. A. Sulaiman. "Electrochemical properties of Bacto-agar and commercial agar applying in porous zinc anode for Zn-air battery". W MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES. Author(s), 2019. http://dx.doi.org/10.1063/1.5089352.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Thakur, Pallavi, i Tharangattu N. Narayanan. "Towards Advanced Rechargeable Metal (Zn, Li)-air (O2) Battery Systems Using Electrode and Electrolyte Engineering". W 2022 IEEE International Conference on Emerging Electronics (ICEE). IEEE, 2022. http://dx.doi.org/10.1109/icee56203.2022.10118265.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Zn-air battery” dla poszczególnych typów źródeł:
Artykuły w czasopismach
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii