Gotowa bibliografia na temat „WIRELESS POWER SYSTEM”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „WIRELESS POWER SYSTEM”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "WIRELESS POWER SYSTEM"

1

خديجة الشاعري, محمد منصور الفارسي, سليم مصطفى سليم i عبد الحفيظ اللبار. "Design of Wireless Power Transfer SystemDesign of Wireless Power Transfer System". Journal of Pure & Applied Sciences 21, nr 4 (3.10.2022): 329–33. http://dx.doi.org/10.51984/jopas.v21i4.2482.

Pełny tekst źródła
Streszczenie:
In the recent years of the twenty first century, the world has witnessed a noticed evolvement in wireless techniques, such that wireless phones, wireless electronic devices, wireless communication and wireless power transfer. Wireless power transfer is a modern technique used to transfer an electric energy from a source to a destination that is consumed to the load. Wireless power transfer is an important for many applications like, wirelessly powered home appliances that received the power from a transmitting device wirelessly. For example lighting of bulbs, operating of electric equipment and wireless charging for electric tooth brush and charging mobiles. In the developed countries there is wireless charging of electric vehicles is based on magnetic resonance field as in Japan. Based on this concept , the idea of this paper has been chosen. This paper aims to design a wireless power transfer system. This design has accomplished three tasks: one is to build a Tesla Tower design circuit and measuring the possible efficiency can be obtained. It's got satisfied results to about 70%. The second task is to build a magnetic coupled circuit that is based on the idea of wireless mobile charging technique. During our work, it's studied the power efficiency and its related to the distance between transmitter and receiver, the diameter of the coils and number of turns. To enhance our results, it's suggested to connect and design of these circuits by simulation using Multisim software and get the desired goal.
Style APA, Harvard, Vancouver, ISO itp.
2

Mishra, Rakesh Kumar. "Space based Solar Power: Feasibility Microwave based wireless power system". Journal of Marine Science and Research 2, nr 1 (27.02.2023): 01–05. http://dx.doi.org/10.58489/2836-5933/005.

Pełny tekst źródła
Streszczenie:
Electricity is Part of Life. Electricity is extremely essential to all need it is flexible form of energy, and has been adapt to huge, and growing number of uses. The concentration on the use of fossil fuel for energy supply is the main threat for stability of the global Climate system. To converse our Globe, the Scientific Community gave evidence that mankind has decreases the green House gas emission.
Style APA, Harvard, Vancouver, ISO itp.
3

Manohar, B. S. P. S., Veera Venkata Sai Kumar Gandham i P. K. Dhal. "An Overview of Wireless Power Transmission System and Analysis of Different Methods". International Journal for Research in Applied Science and Engineering Technology 10, nr 3 (31.03.2022): 1818–27. http://dx.doi.org/10.22214/ijraset.2022.40987.

Pełny tekst źródła
Streszczenie:
Abstract: The overall concept of wireless power transmission and its strategy for finding an efficient means to distribute power without stringing wires that could wirelessly transport electricity are demonstrated in this paper. This study examines the latest trends and technological advancements in the field of wireless power transfer. Wireless power transfer has become commonplace in future societies with advanced technology. Keywords: latest trends, technological advancements, wireless power transmission, stringing wires, ubiquitous
Style APA, Harvard, Vancouver, ISO itp.
4

Sutar, Mr Anurag A. "Wireless Power Transmission System". International Journal for Research in Applied Science and Engineering Technology 9, nr 4 (30.04.2021): 1370–74. http://dx.doi.org/10.22214/ijraset.2021.33941.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Arai, Hiroyuki. "Wireless Power Transfer System". Journal of electromagnetic engineering and science 11, nr 3 (30.09.2011): 143–51. http://dx.doi.org/10.5515/jkiees.2011.11.3.143.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Leach, Mark, Zhao Wang, Chenyue Wang, Ka Lok Man, Jong Hyuk Park i Eng Gee Lim. "Wireless Power Supply System". Advanced Science Letters 21, nr 3 (1.03.2015): 458–60. http://dx.doi.org/10.1166/asl.2015.5866.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Chen, Xiyou, Zhe Wang, Zhengying Lang, Tao Li i Chen Qi. "Research on Desktop Wide Range Wireless Power Transfer Based on High Frequency Electric Field". World Electric Vehicle Journal 12, nr 3 (2.09.2021): 141. http://dx.doi.org/10.3390/wevj12030141.

Pełny tekst źródła
Streszczenie:
This paper proposes a desktop wireless power transfer system that can wirelessly supply power to electrical equipment in a certain space above the aluminum foil using only a high-frequency electric field. Compared with other wireless power supply systems, this system has a smaller power receiving device and a wider power supply range, which is convenient for wireless power supply of portable electrical equipment and low-power electric vehicles. The power receiving device of the system is only the size of a mobile phone, and the power supply range can reach 1.2 m2. This article introduces the system design, electromagnetic field simulation and experiment of the desktop wireless power transfer system. The experimental results show that by using a mobile phone-sized receiving device to connect a light bulb and a fan, multiple loads can simultaneously receive power in a specific space above the desktop power supply. In addition, people can hold the power receiving device for wireless charging.
Style APA, Harvard, Vancouver, ISO itp.
8

Sathe, Minal Dilip, Priyanka Sandesh Nikam i Gajanan Khapre. "Wireless Charging Control for Electric Vehicles". International Journal for Research in Applied Science and Engineering Technology 11, nr 5 (31.05.2023): 4317–21. http://dx.doi.org/10.22214/ijraset.2023.52478.

Pełny tekst źródła
Streszczenie:
Abstract: Wireless power transmission is a way to transmit power without a wire. Wireless power transmission helps connect areas where people do not have access to an adequate power source. Anyone can get clean and green wireless power. From now on, all devices will be connected to the power source wirelessly. Wireless charging for electric vehicles has been in development for several years before the widespread use of these vehicles. Today, wireless charging systems offer an efficient and flexible way to charge electric vehicles of several categories and different capacities from a common base source. Standardization work is well underway to ensure system compatibility between vehicles and locations. In this paper, we presented successful experimental experiments for wireless power transmission and the future scope of wireless power transmission in electric vehicles
Style APA, Harvard, Vancouver, ISO itp.
9

Shirokov, I. B., I. V. Serdyuk, A. A. Azarov i E. I. Shirokova. "System for wireless power transfer". Ural Radio Engineering Journal 5, nr 1 (2021): 7–20. http://dx.doi.org/10.15826/urej.2021.5.1.001.

Pełny tekst źródła
Streszczenie:
The issues of wireless power transfer over short distances are considered. The approach may be used for wireless charging of batteries in unmanned vehicles. It is proposed to use the technique of microstrip structures for power transfer. The microstrip structures form a directional coupler on symmetrical strip lines when approaching by front parts. The length of the interaction lines is chosen several times longer than a quarter of the wavelength. Ballast resistors are excluded from the circuit. This approach leads to small losses of power transfer when the distance between microstrip structures changes over a wide range. Modeling of the operation of the power transfer system has been carried out, an experimental sample has been made and experimental studies have been carried out. The simulation and experiment are well accorded.
Style APA, Harvard, Vancouver, ISO itp.
10

Supriya, Sai, Priyamvadaa R i Savita SangappaMulimani. "WIRELESS POWER THEFT MONITORING SYSTEM". International Journal of Research -GRANTHAALAYAH 5, nr 4RACEEE (30.04.2017): 118–23. http://dx.doi.org/10.29121/granthaalayah.v5.i4raceee.2017.3333.

Pełny tekst źródła
Streszczenie:
Now-a-days in Public Service Sectors, their Automation is the updated trend, which transforms the manpower dependent services to semi-automatic or full-automatic Sectors. Since, because the country is enlightened to globalization, income of people is rising. This “Busy” word has now become vital part of everybody’s life. So, governments prefer not only to give quality service but also the corrupt & error free services to its citizens. So as an upshot, the project proposed which is an advanced system, helps Electricity-Corporations or Electricity-Boards to switch to advancement towards “anti-Power theft” smoothly. This project helps inorder to give quality service to its customer without any kind of problems, along with an aim of reducing recurring theft of energy to a considerable extent.
Style APA, Harvard, Vancouver, ISO itp.

Rozprawy doktorskie na temat "WIRELESS POWER SYSTEM"

1

Jenkinson, Ashley. "Long range wireless power monitoring system". Thesis, Jenkinson, Ashley (2012) Long range wireless power monitoring system. Other thesis, Murdoch University, 2012. https://researchrepository.murdoch.edu.au/id/eprint/13121/.

Pełny tekst źródła
Streszczenie:
This thesis examines the design, construction and implementation of a microcontroller-based long range wireless power monitoring system, suitable for both domestic and industrial use. At its core, the system is based on a number of PICAXE 20X2 microcontrollers and a pair of XBee Pro wireless modules, which are capable of wireless communication to distances exceeding 1.5km. The Long Range Wireless Power Monitoring system is capable of galvanically isolated single and three-phase current and voltage measurements and is able to calculate real power, apparent power and power factor. The results can be displayed numerically or graphically on a Graphical Liquid Crystal Display. In addition to this, the system has the ability to log usage to an external USB Flash device, allowing for later analysis and for the building of a usage history library. The Long Range Wireless Power Monitor is equally proficient at measuring power consumption of devices, or power generation from sources such as photovoltaic cells or wind turbines. In the example of power consumption, usage costs are calculated from user-defined tariffs. Conversely, for generation, the income from power generated is calculated. At the completion of this project, the Wireless Power Monitor is capable of being deployed for use as a fully working prototype. In addition to this, the system provides a solid basis for future adaptation or expansion and due to its open source software can be easily modified for use in specific applications.
Style APA, Harvard, Vancouver, ISO itp.
2

Heffernan, Travis Jade. "Metamaterial Enhanced Wireless Power Transmission System". DigitalCommons@CalPoly, 2013. https://digitalcommons.calpoly.edu/theses/1069.

Pełny tekst źródła
Streszczenie:
Nikolai Tesla's revolutionary experiments demonstrated the possible benefits of transmitting power wirelessly as early as 1891. Applications for the military, consumers, emergency personnel, remote sensors, and others use Tesla’s discovery of wireless power. Wireless power transmission (WPT) has the potential to be a common source of consumable energy, but it will only receive serious consideration if the transmit and receive systems are extremely efficient and capable of delivering usable amounts of power. Research has been conducted to improve the efficiency and performance of nearly every aspect of WPT systems, but the relatively new field of metamaterials (MTMs) has yet to play a dominate role in improving system performance. A gradient index (GRIN) MTM lens was designed using Ansoft’s High Frequency Structure Simulator (HFSS) to improve antenna gain and thereby increase WPT system performance. A simple WPT demonstration system using microstrip patch antennas (MPAs) confirmed the benefits of the GRIN MTM lens. The WPT demonstration system, MPAs, and GRIN MTM lens were constructed and experimentally tested near 2.45 GHz. The theoretical and experimental gain improvement of the MPA due to the GRIN MTM lens is 5.91 dB and 7.06 dB, respectively.
Style APA, Harvard, Vancouver, ISO itp.
3

Wang, Yan. "Low power design for wireless communication system /". View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?ELEC%202003%20WANG.

Pełny tekst źródła
Streszczenie:
Thesis (Ph. D.)--Hong Kong University of Science and Technology, 2003.
Includes bibliographical references (leaves 171-179). Also available in electronic version. Access restricted to campus users.
Style APA, Harvard, Vancouver, ISO itp.
4

Miura, Takeshi. "Study of Microwave Power Receiving System for Wireless Power Transmission". 京都大学 (Kyoto University), 2000. http://hdl.handle.net/2433/180901.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Liu, Feng. "Lifetime maximization through adaptive power allocation in reconfigurable system design for wireless systems /". View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?ECED%202009%20LIU.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Lee, Hyung-Min. "A power-efficient wireless neural stimulating system with inductive power transmission". Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/53449.

Pełny tekst źródła
Streszczenie:
The objective of the proposed research is to advance the power efficiency of wireless neural stimulating systems in inductively powered implantable medical devices (IMD). Several innovative system- and circuit-level techniques are proposed towards the development of power-management circuits and wireless neural stimulating systems with inductive power transmission to improve the overall stimulation power efficiency. Neural stimulating IMDs have been proven as effective therapies to alleviate neurological diseases, while requiring high power and performance for more efficacious treatments. Therefore, power-management circuits and neural stimulators in IMDs should have high power efficiencies to operate with smaller received power from a larger distance. Neural stimulating systems are also required to have high stimulation efficacy for activating the target tissue with a minimum amount of energy, while ensuring charge-balanced stimulation. These features provide several advantages such as a long battery life in an external power transmitter, extended-range inductive power transfer, efficacious and safe stimulation, and less tissue damage from overheating. The proposed research presents several approaches to design and implement the power-efficient wireless neural stimulating IMDs: 1) optimized power-management circuits for inductively powered biomedical microsystems, 2) a power-efficient neural stimulating system with adaptive supply control, and 3) a wireless switched-capacitor stimulation (SCS) system, which is a combination structure of the power-management circuits and neural stimulator, to maximize both stimulator efficiency (before electrodes) and stimulus efficacy (after electrodes).
Style APA, Harvard, Vancouver, ISO itp.
7

Yang, Bo. "High Power Microwave Wireless Power Transmission System with Phase-Controlled Magnetrons". Kyoto University, 2020. http://hdl.handle.net/2433/259739.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Yeh, David Alexander. "Multi-gigabit low-power wireless CMOS demodulator". Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/41168.

Pełny tekst źródła
Streszczenie:
This dissertation presents system and circuit development of the low-power multi-gigabit CMOS demodulator using analog and mixed demodulation techniques. In addition, critical building blocks of the low-power analog quadrature front-ends are designed and implemented using 90 nm CMOS with a targeted compatibility to the traditional demodulator architecture. It exhibits an IF-to-baseband conversion gain of 25 dB with 1.8 GHz of baseband bandwidth and a dynamic range of 23 dB while consuming only 46 mW from a 1 V supply voltage. Several different demodulators using analog signal processor (ASP) are implemented: (1) an ultra-low power non-coherent ASK demodulator is measured to demodulate a maximum speed of 3 Gbps while consuming 32 mW from 1.8 V supply; (2) a mere addition of 7.5 mW to the aforementioned analog quadrature front-end enables a maximum speed of 2.5 Gbps non-coherent ASK demodulation with an improved minimum sensitivity of -38 dBm; (3) a robust coherent BPSK demodulator is shown to achieve a maximum speed of 3.5 Gbps based on the same analog quadrature front-end with only additional 7 mW. Furthermore, an innovative seamless handover mechanism between ASP and PLL is designed and implemented to improve the frequency acquisition time of the coherent BPSK demodulator. These demodulator designs have been proven to be feasible and are integrated in a 60 GHz wireless receiver. The system has been realized in a product prototype and used to stream HD video as well as transfer large multi-media files at multi-gigabit speed.
Style APA, Harvard, Vancouver, ISO itp.
9

Patel, Ketan B. (Ketan Kumar Balubhai) 1975. "Ultra low-power wireless sensor demonstration system : design of a wireless base station". Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/86434.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Lu, Shili. "Stochastic power control for wireless networks: Probabilistic QoS measures". Thesis, University of Ottawa (Canada), 2005. http://hdl.handle.net/10393/26964.

Pełny tekst źródła
Streszczenie:
For wireless network systems, iterative power control algorithms have been proposed to minimize the transmission power, while maintaining reliable communication and base stations. However, since the measurements are random, the channel characteristics always are described by Stochastic Differential Equations (SDE). Based on the stochastic approximation methods, and using time-varying step size sequences, we can get an approximation algorithm to reach an optimal power allocation. After the study of optimal power allocation, the probabilistic Quality of Service (QoS) measures are introduced to evaluate the performance of any control strategy. It provides tight bounds that relate to the probability of failure in achieving the desired QoS requirements. This thesis addresses mobile systems consisting of M transmitters and M receivers, which are subject to motion, and their power is described by SDE. The optimal power control problem is formulated, and the outage probability corresponding to a desired QoS requirements is computed using Moment Generating Function (MGF). Numerical results show that each user needs only to know its own channel gain and its own output assigned by the base station to update the transmitter power in order to maintain a desired Signal to Interference Ratio (SIR) and QoS requirement at the receiver.
Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "WIRELESS POWER SYSTEM"

1

Karri, Ramesh, i David Goodman, red. System-Level Power Optimization for Wireless Multimedia Communication. Boston: Kluwer Academic Publishers, 2002. http://dx.doi.org/10.1007/b117504.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Ramesh, Karri, i Goodman David J. 1939-, red. System-level power optimization for wireless multimedia communication: Power aware computing. Boston: Kluwer Academic, 2002.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Sheng, Samuel. Low-Power CMOS Wireless Communications: A Wideband CDMA System Design. Boston, MA: Springer US, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Poon, Alan Siu Kei. A 5.8GHz CMOS power amplifier for short-range wireless system. Ottawa: National Library of Canada, 2003.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

1945-, Brodersen Robert W., red. Low-power CMOS wireless communications: A wideband CDMA system design. Boston: Kluwer Academic Publishers, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Vitale, Robert L. Design and prototype development of a wireless power transmission system for a micro air vehicle (MAV). Monterey, Calif: Naval Postgraduate School, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Otte, Rob. Low-Power Wireless Infrared Communications. Boston, MA: Springer US, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Chiang, Mung. Power control in wireless cellular networks. Hanover, MA: Now Publishers, 2007.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Otte, Rob. Low-power wireless infrared communications. Boston, MA: Kluwer Academic Publishers, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Sun, Tianjia. Wireless Power Transfer for Medical Microsystems. New York, NY: Springer New York, 2013.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "WIRELESS POWER SYSTEM"

1

Sowmya, T. Sai, Subhojit Dawn, Ch Sunil Kumar, Sk Mounib Baig i R. Varaprasad. "Wireless Solar Power Transmission System". W Renewable Resources and Energy Management, 451–59. London: CRC Press, 2023. http://dx.doi.org/10.1201/9781003361312-50.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Pérez-Nicoli, Pablo, Fernando Silveira i Maysam Ghovanloo. "System Design Examples". W Inductive Links for Wireless Power Transfer, 189–216. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-65477-1_8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Kuznetsov, Roman, i Valeri Chipulis. "Wireless Data Collection in Power System". W Lecture Notes in Electrical Engineering, 21–26. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-41671-2_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Sheng, Samuel, i Robert Brodersen. "System Overview: The Broadband CDMA Downlink". W Low-Power CMOS Wireless Communications, 37–58. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5457-8_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Zhang, Xi, Chong Zhu i Haitao Song. "Communication System". W Wireless Power Transfer Technologies for Electric Vehicles, 197–205. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-8348-0_8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Oh, Jin-Seok, Soo-Young Bae, Ji-Young Lee, Jun-Ho Kwak, Jae-Min Kim i Cameron Johnstone. "Wireless Monitoring System for Hybrid Power Generation System". W Springer Proceedings in Physics, 91–98. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13624-5_10.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Narayan, Jay Prakash, Anamika Das i Ananyo Bhattacharya. "Class-E Power Amplifier-Based Wireless Power Transfer System". W Recent Advances in Power Electronics and Drives, 387–94. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-9239-0_29.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Li, Suet-Fei, Roy Sutton i Jan Rabaey. "Low Power Operating System for Heterogeneous Wireless Communication System". W Compilers and Operating Systems for Low Power, 1–16. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4419-9292-5_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Zhang, Chenxi, Zetao Li, Yingzhao Zhang i Zhongbin Zhao. "Solar Power Based Wireless Charging System Design". W Lecture Notes in Electrical Engineering, 621–35. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6496-8_57.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Jung, Gu Ho. "Optimum Design of Wireless Power Transfer System". W The On-line Electric Vehicle, 139–48. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-51183-2_9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "WIRELESS POWER SYSTEM"

1

Eekshita, Patakula, Nallabothula Sangeeth Venkata Narayana i Ramesh Jayaraman. "Wireless Power Transmission System". W 2021 International Conference on Computer Communication and Informatics (ICCCI). IEEE, 2021. http://dx.doi.org/10.1109/iccci50826.2021.9402575.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Jian, Hau-Shian, Jia-Jing Kao i Chun-Liang Lin. "Adaptive wireless power charging system". W 2018 13th IEEE Conference on Industrial Electronics and Applications (ICIEA). IEEE, 2018. http://dx.doi.org/10.1109/iciea.2018.8397791.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Ahn, Seungyoung, i Dong-Ho Cho. "Future wireless power transportation system". W 2013 Asia Pacific Microwave Conference - (APMC 2013). IEEE, 2013. http://dx.doi.org/10.1109/apmc.2013.6694833.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Meetoo, Chris, Sanjay Bahadoorsingh, Neil Ramsamooj i Chandrabhan Sharma. "Wireless residential power monitoring system". W 2017 IEEE Manchester PowerTech. IEEE, 2017. http://dx.doi.org/10.1109/ptc.2017.7981122.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Yabuta, Teruki, Satoshi Yoshida i Kenjiro Nishikawa. "Dual-band Wireless Power Transfer System for Simultaneous Wireless Information and Power Transfer System". W 2022 Wireless Power Week (WPW). IEEE, 2022. http://dx.doi.org/10.1109/wpw54272.2022.9901355.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Torres, Ricardo, Diogo Matos, Ricardo Correia i Nuno B. Carvalho. "Distributed Ambient SWIPT System". W 2022 Wireless Power Week (WPW). IEEE, 2022. http://dx.doi.org/10.1109/wpw54272.2022.9854003.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Besnoff, Jordan, David S. Ricketts, Yohay Buchbut, Gergory Castillo, Moshe Laifendfeld i Kobi Scheim. "Smart wireless power: A wireless power and bi-directional LIN communication system". W 2017 IEEE International Conference on Microwaves, Antennas, Communications and Electronic Systems (COMCAS). IEEE, 2017. http://dx.doi.org/10.1109/comcas.2017.8244813.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Kini, Vinayak, Chinmay Patil, Siddhesh Bahadkar, Sharvil Panandikar, Akhilesh Sreedharan i Abhay Kshirsagar. "Low Power Wireless Health Monitoring System". W 2015 International Conference on Advances in Computing, Communications and Informatics (ICACCI). IEEE, 2015. http://dx.doi.org/10.1109/icacci.2015.7275738.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Hsieh, Hsin-Che, Jing-Yuan Lin, Yao-Ching Hsieh i Huang-Jen Chiu. "High-efficiency wireless power transfer system". W 2015 IEEE International Telecommunications Energy Conference (INTELEC). IEEE, 2015. http://dx.doi.org/10.1109/intlec.2015.7572499.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Alphones, A., i J. P. K. Sampath. "Metamaterial assisted wireless power transfer system". W 2015 Asia-Pacific Microwave Conference (APMC). IEEE, 2015. http://dx.doi.org/10.1109/apmc.2015.7413021.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "WIRELESS POWER SYSTEM"

1

Smith, Marcus D., Jr Brandhorst i Henry W. Support to a Wireless Power System Design. Fort Belvoir, VA: Defense Technical Information Center, grudzień 2011. http://dx.doi.org/10.21236/ada564824.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Akyol, Bora A., Harold Kirkham, Samuel L. Clements i Mark D. Hadley. A Survey of Wireless Communications for the Electric Power System. Office of Scientific and Technical Information (OSTI), styczeń 2010. http://dx.doi.org/10.2172/986700.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Nowak, Dieter, i Hnatczuk Wsewolod. Wireless Smart Electric Power Management System Based on MEMS Technology. Fort Belvoir, VA: Defense Technical Information Center, lipiec 2003. http://dx.doi.org/10.21236/ada640070.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Pereira da Cunha, Mauricio. Wireless microwave acoustic sensor system for condition monitoring in power plant environments. Office of Scientific and Technical Information (OSTI), marzec 2017. http://dx.doi.org/10.2172/1406890.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Tzonev, Nick. PR-396-183905-R01 Autonomous System For Monitoring Pipeline River Crossings. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), czerwiec 2021. http://dx.doi.org/10.55274/r0012110.

Pełny tekst źródła
Streszczenie:
The goal of the GHZ-2-01 Project is to develop and lab-test a system for monitoring underground pipeline facilities at remote river crossings where access to power and wireline communications is not readily available. A next generation real-time river crossing monitoring solution requires an integration of various sensor types, data computation capabilities, and low power wireless connectivity which would: - utilize proven sensors technologies such as accelerometers, inclinometer strings and float-out buoys to detect dangerous conditions, - be able to recognize and minimize false alarms by examining a combination of sensors, - alarm on contact with hydrocarbons, - require minimal maintenance, - be easily scalable, both geographically and as a network, - provide seamless integration into Supervisory Control and Acquisition (SCADA) systems, and - be economical. There is a related webinar.
Style APA, Harvard, Vancouver, ISO itp.
6

Muelaner, Jody Emlyn. Electric Road Systems for Dynamic Charging. SAE International, marzec 2022. http://dx.doi.org/10.4271/epr2022007.

Pełny tekst źródła
Streszczenie:
Electric road systems (ERS) enable dynamic charging—the most energy efficient and economical way to decarbonize road vehicles. ERS draw electrical power directly from the grid and enable vehicles with small batteries to operate without the need to stop for charging. The three main technologies (i.e., overhead catenary lines, road-bound conductive tracks, and inductive wireless systems in the road surface) are all technically proven; however, no highway system has been commercialized. Electric Road Systems for Dynamic Charging discusses the technical and economic advantages of dynamic charging and questions the current investment in battery-powered and hydrogen-fueled vehicles.
Style APA, Harvard, Vancouver, ISO itp.
7

Riter, Karmann, Anthony Clint Clayton, Kelley Rountree i Prakash Doraiswamy. Solar Station for an Off-the-Grid Air Quality Sensor System. RTI Press, czerwiec 2023. http://dx.doi.org/10.3768/rtipress.2023.mr.0051.2306.

Pełny tekst źródła
Streszczenie:
Air quality monitoring is a rapidly growing area of citizen science, or community science (CS), thanks to the availability of low-cost sensors. Contributing to a crowdsourced data platform (e.g., http:// purpleair .com/ map) is usually easy in urban areas, where there is access to uninterrupted electricity and wireless internet (Wi-Fi). However, there are sometimes security restrictions on Wi-Fi or a lack of exterior power outlets. Also, rural regions, particularly in low- and middle-income countries, often lack electricity and Wi-Fi continuity. RTI International has designed and distributed a solar power and Wi-Fi station that can adequately power both a small air quality sensor (e.g., PurpleAir PA-II) and a Wi-Fi hotspot to overcome these challenges. The station housing can accommodate a battery, a controller, and a cell phone or another type of Wi-Fi hotspot device. This paper discusses the need for such a station; a design for the current station, including parts list; suggestions for modifications in various use cases; and design factors to consider, including amount of sunlight per day, intended number of operational days under cloudy conditions, season, and total power requirements. This method is intended to be open source and a starting point for citizen scientists and CS projects.
Style APA, Harvard, Vancouver, ISO itp.
8

Liu, Xingbo. Development of Self-Powered Wireless-Ready High Temperature Electrochemical Sensors for In-Situ Corrosion Monitoring for Boiler Tubes in Next Generation Coal-based Power Systems. Office of Scientific and Technical Information (OSTI), czerwiec 2015. http://dx.doi.org/10.2172/1312516.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii