Gotowe bibliografie tematyczne / Wireless charging validation

Gotowa bibliografia na temat „Wireless charging validation”

Autor: Grafiati
Data publikacji: 25 maja 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Spis treści

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Wireless charging validation”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Wireless charging validation"

1

Jakó, Zoltán, Ádám Knapp i Nadim El Sayed. "Wireless Authentication Solution and TTCN-3 based Test Framework for ISO-15118 Wireless V2G Communication". Infocommunications journal, nr 2 (2019): 39–47. http://dx.doi.org/10.36244/icj.2019.2.5.

Pełny tekst źródła
Streszczenie:
Vehicle to grid (V2G) communication for electric vehicles and their charging points is already well established by the ISO 15118 standard. The standard allows vehicles to communicate with the charging station using the power cable, i.e. a wired link, but it is improved to enable wireless (WLAN) links as well. This paper aims to provide an implementation accomplishes a wireless authentication solution (WAS). With that the electric vehicles can establish V2G connection when approaching the charging pool, then identify and authenticate the driver and/or the vehicle. Furthermore, the paper presents a TTCN-3 based validation and verification (V&V) framework in order to test the conformance of the prototype implementation against the standard.
Style APA, Harvard, Vancouver, ISO itp.
2

Shraddha, Kaushik, Nuruti Pooja, Sarangi Shreya, Pandey Manu, Kumar Sahu Somesh i Singh Sarabjeet. "Design and evaluation of solar power based wireless power transfer system with road-embedded transmitter coil for dynamic charging of electric vehicle". i-manager’s Journal on Future Engineering and Technology 18, nr 4 (2023): 26. http://dx.doi.org/10.26634/jfet.18.4.19477.

Pełny tekst źródła
Streszczenie:
The transportation sector is moving away from conventional fossil fuel-powered vehicles towards electric mobility. Petrol and diesel-powered vehicles contribute significantly to the carbon footprint. Consequently, the use of electric vehicles helps to reduce reliance on internal combustion engines and promotes zero emissions. Electric vehicles are expected to become the mainstream mode of transportation with the development of robust charging infrastructure. This research proposed an innovative solution for wirelessly charging electric vehicles using dynamic wireless power transfer, which incorporates solar panels for feasible charging. The system relies on resonant inductive power transfer between the coils installed beneath the road surface and a receiver coil placed on the vehicle. The proposed system was simulated in MATLAB, and an experimental validation was conducted using a hardware setup. The overall system showcases power transmission to charge the vehicle's battery while in motion, eliminating the need to wait for a full battery charge.
Style APA, Harvard, Vancouver, ISO itp.
3

Luo, Win-Jet, C. Bambang Dwi Kuncoro i Yean-Der Kuan. "Wireless Power Hanger Pad for Portable Wireless Audio Device Power Charger Application". Energies 13, nr 2 (15.01.2020): 419. http://dx.doi.org/10.3390/en13020419.

Pełny tekst źródła
Streszczenie:
Since the portability feature has been introduced in headphone development, this device now uses a battery as the main built-in power. However, the battery has limited power capacity and a short lifetime. Battery substitution and a conventional battery charger method is an ineffective, inflexible inconvenience for enhancing the user experience. This paper presents an innovative portable audio device battery built-in charger method based on wireless power technology. The developed charging device is composed of a headphone hanger pad for the wireless headphone and a charging pad for the portable wireless audio device battery charging. Circular flat spiral air-core coil was designed and evaluated using a numerical method to obtain optimal vertical magnetic field distribution based on the proposed evaluation criteria. A coil has inner coil diameter of 25 mm, outer coil diameter of 47.8 mm, wire diameter of 0.643 mm, the pitch of 0.03 mm and a number of turns of 17 was chosen to be implemented on the transmitter coil. A magnetic induction technique was adopted in the proposed wireless power transmission module which was implemented using commercial off-the-shelf components. For experimental and validation purposes, a developed receiver module applied to the commercial wireless headphone and portable audio speaker have a built-in battery capacity at 3.7 V 300 mAh. The experimental results show that the wireless power hanger pad prototype can transfer a 5 V induction voltage at a maximum current of 1000 mA, and the power transfer efficiency is around 70%. It works at 110 kHz of operation frequency with a maximum transmission distance of about 10 mm and takes 1 h to charge fully one 3.7 V 300 mAh polymer lithium battery.
Style APA, Harvard, Vancouver, ISO itp.
4

Hentschel, Uwe, Fiete Labitzke, Martin Helwig, Anja Winkler i Niels Modler. "Aspects of Foreign Object Detection in a Wireless Charging System for Electric Vehicles Using Passive Inductive Sensors". World Electric Vehicle Journal 13, nr 12 (15.12.2022): 241. http://dx.doi.org/10.3390/wevj13120241.

Pełny tekst źródła
Streszczenie:
If the energy transfer for charging the traction battery of an electric vehicle takes place wirelessly and with inductive components, the active area of the charging system must be monitored for safety reasons for the presence or intrusion of metallic objects that do not belong to the charging system. In the past, different concepts for such monitoring have been described. In this paper, passive inductive sensors are used and characterized based on practical measurements. With this type of sensor, the detectability of metallic foreign objects is very closely related to the characteristics of the magnetic field of the charging system. By optimizing the geometry of the sensor coils, the authors show how foreign object detection can be improved even in areas with low excitation of the foreign objects and the sensor coils by the magnetic field. For this purpose, a charging system, with which charging powers of up to 10 kW have been realized in the past, and standardized test objects are used. Furthermore, the thermal behavior of the metallic test objects was documented, which in some cases heated up to about 300 °C and above in a few minutes in the magnetic field of the charging system. The results show the capability of passive inductive sensors to detect metallic foreign objects. Based on the measurements shown here, the next step will be to simulate the charging system and the foreign object detection in order to establish the basis for a virtual development and validation of such systems.
Style APA, Harvard, Vancouver, ISO itp.
5

Yi, Shihan. "From Theory to Practice: A Multidimensional Optimization Method for Improving the Charging Efficiency of Electric Vehicles". International Journal of Energy 3, nr 3 (26.11.2023): 28–30. http://dx.doi.org/10.54097/ije.v3i3.007.

Pełny tekst źródła
Streszczenie:
This paper focuses on the optimization of dynamic wireless charging technology for electric vehicles to address challenges such as long charging time and few charging locations. The research covers transmit and receive unit optimization, system and power management improvements, and the impact of environmental conditions on charging efficiency. In terms of the optimization of transmitting and receiving devices, the paper discusses the optimization of power, frequency and directivity to improve the energy transmission distance and efficiency. In terms of system and power management optimization, energy loss is reduced through methods such as magnetic disc structure improvement, and the importance of proper power management for battery life and charging safety is emphasized. In addition, the influence of environmental conditions (such as temperature, humidity, and distance) on charging efficiency is also elaborated. High temperature, high humidity and long distance may affect the system performance. The paper puts forward some countermeasures for these effects, such as heat dissipation design, humidity cancellation technology and signal processing technology. However, further field validation and technical, cost and standard issues need to be resolved to achieve commercial application of the technology.
Style APA, Harvard, Vancouver, ISO itp.
6

Cappelle, Jona, Laura Monteyne, Jarne Van Mulders, Sarah Goossens, Maarten Vergauwen i Liesbet Van der Perre. "Low-Complexity Design and Validation of Wireless Motion Sensor Node to Support Physiotherapy". Sensors 20, nr 21 (7.11.2020): 6362. http://dx.doi.org/10.3390/s20216362.

Pełny tekst źródła
Streszczenie:
We present a motion sensor node to support physiotherapy, based on an Inertial Measurement Unit (IMU). The node has wireless interfaces for both data exchange and charging, and is built based on commodity components. It hence provides an affordable solution with a low threshold to technology adoption. We share the hardware design and explain the calibration and validation procedures. The sensor node has an autonomy of 28 h in operation and a standby time of 8 months. On-device sensor fusion yields static results of on average 3.28° with a drift of 2° per half hour. The final prototype weighs 38 g and measures ø6 cm × 1.5 cm. The resulting motion sensor node presents an easy to use device for both live monitoring of movements as well as interpreting the data afterward. It opens opportunities to support and follow up treatment in medical cabinets as well as remotely.
Style APA, Harvard, Vancouver, ISO itp.
7

Liu, Guiyun, Baihao Peng i Xiaojing Zhong. "Epidemic Analysis of Wireless Rechargeable Sensor Networks Based on an Attack–Defense Game Model". Sensors 21, nr 2 (15.01.2021): 594. http://dx.doi.org/10.3390/s21020594.

Pełny tekst źródła
Streszczenie:
Energy constraint hinders the popularization and development of wireless sensor networks (WSNs). As an emerging technology equipped with rechargeable batteries, wireless rechargeable sensor networks (WRSNs) are being widely accepted and recognized. In this paper, we research the security issues in WRSNs which need to be addressed urgently. After considering the charging process, the activating anti-malware program process, and the launching malicious attack process in the modeling, the susceptible–infected–anti-malware–low-energy–susceptible (SIALS) model is proposed. Through the method of epidemic dynamics, this paper analyzes the local and global stabilities of the SIALS model. Besides, this paper introduces a five-tuple attack–defense game model to further study the dynamic relationship between malware and WRSNs. By introducing a cost function and constructing a Hamiltonian function, the optimal strategies for malware and WRSNs are obtained based on the Pontryagin Maximum Principle. Furthermore, the simulation results show the validation of the proposed theories and reveal the influence of parameters on the infection. In detail, the Forward–Backward Sweep method is applied to solve the issues of convergence of co-state variables at terminal moment.
Style APA, Harvard, Vancouver, ISO itp.
8

Frivaldsky, Michal, i Miroslav Pavelek. "In Loop Design of the Coils and the Electromagnetic Shielding Elements for the Wireless Charging Systems". Energies 13, nr 24 (17.12.2020): 6661. http://dx.doi.org/10.3390/en13246661.

Pełny tekst źródła
Streszczenie:
This paper deals with in loop design of coupling elements of the wireless charging systems (WChS). The in-loop design is created as a script/User Interface (UI) in MATLAB environment, which is based on finite element models of WChS. Main aim of developed tool is to easily identify the optimal geometrical parameters of the coupling coils. The optimization of the coil’s geometrical and electrical parameters is specified by an algorithm, which is based on definition for transfer of required amount of power and on geometrical restrictions of the target application. The second part of the proposed script/UI is used for user guided design of the electromagnetic shielding. It enables to optimize the shielding parameters in order to reach the limits defined by international standards for safety levels with respect to human exposure. Proposed design methodology together with user interface have been verified though experimental validation. For this purpose, construction of WChS was realized based on the results from in loop design process. Comparisons have been made according to the evaluation of simulation model´s accuracy, that is, the values of self-inductances, mutual inductances, coupling coefficient and gain characteristics have been evaluated (simulations vs. experiments). At the end of the paper the evaluation of the shielding performance was realized, while once more the comparison between simulation and experiments have been made. Received results are showing less than 2% of the relative error. Using presented methodology, the fast optimization actions can be done during design and modelling of WChS.
Style APA, Harvard, Vancouver, ISO itp.
9

Liang, Mincui, Khalil El Khamlichi Drissi i Christopher Pasquier. "Self- and Mutual-Inductance Cross-Validation of Multi-Turn, Multi-Layer Square Coils for Dynamic Wireless Charging of Electric Vehicles". Energies 16, nr 20 (10.10.2023): 7033. http://dx.doi.org/10.3390/en16207033.

Pełny tekst źródła
Streszczenie:
Dynamic Wireless Power Transfer (DWPT) has high potential to overcome electric vehicles’ battery issues of size and range and to achieve fully autonomous driving. Accurately extracting the self- and mutual-inductance of the coils is essential for controlling and optimizing the overall performance of the DWPT system under real driving conditions. Due to the limited space for coil installation at the bottom of the vehicles, multi-turn, multi-layer square coils are proposed to maximize the space utilization of the DWPT system. For the first time, this paper presents a theoretical model for calculating the self- and mutual-inductance and the coupling coefficients of multi-turn, multi-layer square coils. Taking a four-turn, four-layer square coil as an example, the model is cross-validated by 3D coil modelling and simulation, as well as practical measurements. A theoretical–experimental verification is further conducted to indirectly corroborate the cross-validated coupling coefficients of the two coils. On average, the normalized root mean square errors of the resultant self-inductance and coupling coefficients of two identical coils are 1.04% and 4.29%, respectively. Specifically, for the selected case, normalized root mean square errors of the zero-phase angle frequencies of the system under different misalignment situations average out at 1.32%.
Style APA, Harvard, Vancouver, ISO itp.
10

Gaddam, Sindhu, Ruhie ., Siva Naga Chethana Yasam i Ranjith Kumar N. "Wireless Electric Vehicle Battery Charging System using PV Array". International Journal for Research in Applied Science and Engineering Technology 10, nr 6 (30.06.2022): 1031–37. http://dx.doi.org/10.22214/ijraset.2022.43916.

Pełny tekst źródła
Streszczenie:
Abstract: The rapid emergence and evolution of wireless power transfer technology (WPT) have led to the development of various electrical vehicle applications. One of these is the exploitation of the power from a photovoltaic (PV) array. This paper proposes a system that can extract the power from the PV array and recharge the electric vehicle's battery using a Series-Series compensated network. The use of the resonance phenomenon in transferring power efficiently has been widely acknowledged. Due to the presence of various reactive components, a frequency analysis of a series-series compensator is performed. A proposed system for analyzing the frequency of a wireless power transmission system is simulated in MATLAB Simulink software. The results of the study and the simulation are presented in this paper, which helps in validating the proposed system. The proposed system can be used in various climatic conditions to recharge an electric vehicle. In addition, the proposed system can be developed with closed-loop controllers to improve its performance. Keywords: PV array, H-bridge inverter, Rectifier, wireless power transfer, series-series compensation, photovoltaic, Battery, Transmitter, Receiver.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Wireless charging validation"

1

COLUSSI, JACOPO. "Design and Experimental Validation of a 100kW Three-PhaseWireless Power Transfer". Doctoral thesis, Politecnico di Torino, 2022. http://hdl.handle.net/11583/2972103.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Quignon, Jérémy. "Chargement sans fil par NFC". Electronic Thesis or Diss., Aix-Marseille, 2022. http://www.theses.fr/2022AIXM0462.

Pełny tekst źródła
Streszczenie:
Le contexte de la thèse se situe sur le marché du NFC et de son extension permettant de faire du chargement sans fil. Cette nouvelle fonctionnalité permet de recharger des petits produits nomades qui ne peuvent pas l’être avec les technologies de recharge sans fil présent sur le marché aujourd’hui. L’objectif de cette thèse est de développer une solution destinée à ces produits nomades, comme des montres et bracelets connectés, des écouteurs sans fil, des lunettes connectées, … Cette solution doit répondre aux différentes normes NFC tout en cherchant à optimiser au maximum le rendement du transfert de puissance
The PHD context is focused on the NFC market and its extension allowing wireless charging. This new functionality allows to charge wearable products that cannot be charged with the wireless charging technologies available on the market today. The PHD objective is to develop a solution for these wearable products, such as connected watches and bracelets, wireless headphones, connected glasses, ... This solution must satisfy NFC standards while seeking to optimize the performance of power transfer
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Wireless charging validation"

1

Schneider, Jesse, Ky Sealy, Mike Boettigheimer, Timo Laemmle, Ivo Teerlinck, Maximilian Hollenbach, Bastian Rappholz, Andreas Wendt i Simon Joos. "Validation and Comparison of Alignment Methodologies for the SAE Wireless Power Transfer, J2954 Standard". W WCX SAE World Congress Experience. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2024. http://dx.doi.org/10.4271/2024-01-2027.

Pełny tekst źródła
Streszczenie:
<div class="section abstract"><div class="htmlview paragraph">Wireless Power Transfer (WPT) is set to become an alternative to conductive charging and promises highly efficient charging of electric and plug-in-hybrid vehicles based on the previous publications of the SAE J2954 standards. However, a single common methodology for alignment of the Vehicle Assembly (VA) to the Ground Assembly (GA) for wireless charging public infrastructure was not included in the first two versions of the SAE J2954 standard. Two methodologies for alignment are evaluated in this technical paper for a future SAE J2954 standard: Differential Inductive Positioning System (DIPS) using an auxiliary magnetic field to align; and Ultra-Wide Band (UWB) Ranging using Radio Frequency triangulation to align. Data and comparison of the two alignment methodologies are shown in conjunction with analysis and input from the SAE J2954 WPT Taskforce. The objective is to show the benefits and shortcomings of each technology based on testing and to indicate a harmonized decision for one methodology to be published in the next version of the SAE J2954 standard. This test report documents the results of two SAE J2954 Alignment Witness Tests of the Differential Inductive Positioning System (DIPS) performed in Stuttgart, Germany in September 2023 and Ultra-Wide Band Ranging Positioning System (UWB) performed in Switzerland in October 2023.</div></div>
Style APA, Harvard, Vancouver, ISO itp.
2

Bottigheimer, Mike, David Maier, Nejila Parspour, Jannis Noeren i Rudolf Walter. "Validation of the Design of an 11 kW Inductive Charging Prototype on a New Test Bench for WPT-Systems". W 2018 IEEE Wireless Power Transfer Conference (WPTC). IEEE, 2018. http://dx.doi.org/10.1109/wpt.2018.8639123.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Lawton, Patrick, Feiyang Jackman Lin i Grant Covic. "Reducing and Validating Surface Flux Emissions for High-Power Wireless Charging Systems". W 2022 Wireless Power Week (WPW). IEEE, 2022. http://dx.doi.org/10.1109/wpw54272.2022.9853991.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Wireless charging validation” dla poszczególnych typów źródeł:
Artykuły w czasopismach
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii