Gotowa bibliografia na temat „Viscoplastic modeling”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Viscoplastic modeling”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Viscoplastic modeling"
Zhang, Yuqing, Fan Gu, Bjorn Birgisson i Robert L. Lytton. "Viscoelasticplastic–Fracture Modeling of Asphalt Mixtures Under Monotonic and Repeated Loads". Transportation Research Record: Journal of the Transportation Research Board 2631, nr 1 (styczeń 2017): 20–29. http://dx.doi.org/10.3141/2631-03.
Pełny tekst źródłaShi, Qianyu, Hongjun Yu, Xiangyuhan Wang, Kai Huang i Jian Han. "Phase Field Modeling of Crack Growth with Viscoplasticity". Crystals 13, nr 5 (22.05.2023): 854. http://dx.doi.org/10.3390/cryst13050854.
Pełny tekst źródłaChen, Cheng‐lung. "Generalized Viscoplastic Modeling of Debris Flow". Journal of Hydraulic Engineering 114, nr 3 (marzec 1988): 237–58. http://dx.doi.org/10.1061/(asce)0733-9429(1988)114:3(237).
Pełny tekst źródłaCordebois, J. P., i T. Constantin. "Viscoplastic modeling of cutting in turning". Journal of Materials Processing Technology 41, nr 2 (luty 1994): 187–200. http://dx.doi.org/10.1016/0924-0136(94)90060-4.
Pełny tekst źródłaEkh,, Magnus. "Thermo-Elastic-Viscoplastic Modeling of IN792". Journal of the Mechanical Behavior of Materials 12, nr 6 (grudzień 2001): 359–88. http://dx.doi.org/10.1515/jmbm.2001.12.6.359.
Pełny tekst źródłaZhelyazov, Todor, i Sergey Pshenichnov. "Modeling the viscoplastic transient dynamic process". Journal of Physics: Conference Series 2675, nr 1 (1.12.2023): 012017. http://dx.doi.org/10.1088/1742-6596/2675/1/012017.
Pełny tekst źródłaKim, Yun Tae, i S. Leroueil. "Modeling the viscoplastic behaviour of clays during consolidation: application to Berthierville clay in both laboratory and field conditions". Canadian Geotechnical Journal 38, nr 3 (1.06.2001): 484–97. http://dx.doi.org/10.1139/t00-108.
Pełny tekst źródłaMe´ric, L., i G. Cailletaud. "Single Crystal Modeling for Structural Calculations: Part 2—Finite Element Implementation". Journal of Engineering Materials and Technology 113, nr 1 (1.01.1991): 171–82. http://dx.doi.org/10.1115/1.2903375.
Pełny tekst źródłaOhno, Nobutada. "Homogenized Elastic-Viscoplastic Behavior of Anisotropic Open-Porous Bodies". Key Engineering Materials 535-536 (styczeń 2013): 12–17. http://dx.doi.org/10.4028/www.scientific.net/kem.535-536.12.
Pełny tekst źródłaChow, C. L., X. J. Yang i Edmund Chu. "Viscoplastic Constitutive Modeling of Anisotropic Damage Under Nonproportional Loading". Journal of Engineering Materials and Technology 123, nr 4 (24.07.2000): 403–8. http://dx.doi.org/10.1115/1.1395575.
Pełny tekst źródłaRozprawy doktorskie na temat "Viscoplastic modeling"
Diehl, Ted. "Modeling of elastic-viscoplastic behavior and its finite element implementation /". Online version of thesis, 1988. http://hdl.handle.net/1850/10461.
Pełny tekst źródłaFeng, Huaiping. "Multiphase Deformation Analysis of Elasto-viscoplastic Unsaturated Soil and Modeling of Bentonite". 京都大学 (Kyoto University), 2007. http://hdl.handle.net/2433/57266.
Pełny tekst źródłaKyoto University (京都大学)
0048
新制・課程博士
博士(工学)
甲第13775号
工博第2879号
新制||工||1425(附属図書館)
25991
UT51-2008-C691
京都大学大学院工学研究科社会基盤工学専攻
(主査)教授 岡 二三生, 教授 松岡 俊文, 准教授 木元 小百合
学位規則第4条第1項該当
Mimura, Mamoru. "ELASTO-VISCOPLASTIC CONSTITUTIVE MODELING FOR CLAY AND DEFORMATION ANALYSIS OF SOFT CLAY FOUNDATION". Kyoto University, 1991. http://hdl.handle.net/2433/74590.
Pełny tekst źródłaKim, YoungSeok. "Elasto-viscoplastic modeling and analysis for cohesive soil considering suction and temperature effects". 京都大学 (Kyoto University), 2005. http://hdl.handle.net/2433/144866.
Pełny tekst źródłaDanielsson, Mats 1973. "Micromechanics, macromechanics and constitutive modeling of the elasto-viscoplastic deformation of rubber-toughened glassy polymers". Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/17608.
Pełny tekst źródłaIncludes bibliographical references (p. 251-258).
Glassy polymers, such as polystyrene (PS), poly(methyl methacrylate) (PMMA) and polycarbonate (PC), are common engineering polymers that have found uses in consumer products ranging from portable computers and optical lenses, to automotive components and appliance housings. PMMA and PS are typically considered to be brittle polymers, since they fail in a brittle manner under low triaxiality conditions, such as under uniaxial tension. Polycarbonate is considered to be a more ductile polymer than PMMA and PS, since it will deform plastically under uniaxial tension. However, PC does exhibit brittle behavior under certain loading conditions, such as low temperatures, high strain rates, or highly (tensile) triaxial stress states. A technique used for reducing the brittleness (increasing the fracture toughness) of glassy polymers is rubber-toughening. The technology of rubber-toughening, which involves blending a small volume fraction (5-20%) of rubber particles with the homopolymer, has been used commercially since the 1940s, and has been of major importance to the plastics industry. The technology of rubber-toughening is qualitatively well understood, but quantitative tools to study the material response are still at an early stage of development. The purpose of this thesis is to develop numerical tools to investigate the mechanical behavior of rubber-toughened glassy polymers, with emphasis on rubber-toughened PC. To this end, several tools are developed.
(cont.) Three-dimensional micromechanical models of the heterogeneous microstructure are developed to study the effects of particle volume fraction on the underlying elastic visco-plastic deformation mechanisms in the material, and how these mechanisms influence the macroscopic [continuum-level] response of the material. A continuum-level constitutive model is developed for the homogenized large-strain elastic-viscoplastic behavior of the material. The model is calibrated against micromechanical modeling results for rubber-toughened polycarbonate. The constitutive model is used to study boundary value problems such as notched tensile bars, where a multi-scale modeling approach enables assessment of failure due to local stress and strain levels in the material. The results are compared to experimental studies to establish correlations between the continuum-level response of the material, and observed failure mechanisms in the material.
by Mats Danielsson.
Ph.D.
Rodriguez, Martinez José Antonio. "Advanced constitutive relations for modeling thermo-viscoplastic behaviour of metallic alloys subjected to impact loading". Thesis, Metz, 2010. http://www.theses.fr/2010METZ004S/document.
Pełny tekst źródłaIn this doctoral Thesis the thermo-viscoplastic behaviour of metallic alloys used for structural protection purposes has been analyzed. The study includes the proposition of advanced constitutive relations and their integration into numerical models. These numerical models are validated for impact problems within the low-intermediate range of impact velocities (until 85 m/s). The advanced constitutive relations derived are based on the Rusinek-Klepaczko model whose validity is extended to metallic alloys showing dependence on plastic strain on the volume thermally activated. In addition the constitutive relations developped allow describing macroscopically viscous drag effects at high strain rates, negative strain rate sensitivity and martensitic transformation phenomena. Implementation of previous constitutive relations has been conducted into the FE code ABAQUS/Explicit. Thus, development of numerical models for the simulation of ring expansion test and conventional dynamic tension test has allowed analyzing the formation of plastic instabilities. In this analysis the effects of strain rate sensitivity, strain hardening and plastic wave propagation have been considered. Finally, it has been examined the impact behaviour of metallic alloys widely used for structural protection purposes: the mild steel ES, the aluminium alloy 2024-T3, the steel AISI 304 and the steel TRIP 1000. For that goal conventional characterization tests as well as impact tests have been conducted. Numerical models based on the constitutive relations derived have been developped in order to simulate the impact tests. These numerical models offered a suitable description of the perforation process in terms of ballistic limit and the associated failure mode of the target
Samtani, Nareshkumar Chandan. "Constitutive modeling and finite element analysis of slowly moving landslides using hierarchical viscoplastic material model". Diss., The University of Arizona, 1991. http://hdl.handle.net/10150/185374.
Pełny tekst źródłaTini, Vivian [Verfasser]. "Lifetime prediction of a typical rocket combustion chamber by means of viscoplastic damage modeling / Vivian Tini". Aachen : Shaker, 2014. http://d-nb.info/1063265657/34.
Pełny tekst źródłaHogan, Erik A. "An efficient method for the optimization of viscoplastic constitutive model constants". Honors in the Major Thesis, University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETH/id/1274.
Pełny tekst źródłaBachelors
Engineering and Computer Science
Aerospace Engineering
Bonatti, Colin. "Testing and modeling of the viscoplastic and fracture behavior of metallic foils used in lithium-ion batteries". Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/101332.
Pełny tekst źródłaCataloged from PDF version of thesis.
Includes bibliographical references (pages 37-39).
Aluminum 1235-H18 foils with sub-micron grain dimensions are often used as current collectors in Li-ion batteries. Due to their contribution to the structural integrity of batteries under impact loading, their plastic and fracture response is investigated in detail. Using a novel micro-tensile testing device with a piezoelectric actuator, dogbone specimens with a 1.25 mm wide and 5.7 mm long gage section are tested for three different in-plane material orientations and for strain rates ranging from 10-5/s to 10-2/s. It was found that the stress at a proof strain of 2% increased by about 25% from 160MPa to 200MPa within this range of strain rates. Furthermore, pronounced inplane anisotropy is observed as reflected by Lankford ratios variations from 0.2 to 1.5 .A material model is proposed which borrows elements of the anisotropic Yld2000-2d plasticity model and integrates these into a basic viscoplasticity framework that assumes the multiplicative decomposition of the equivalent stress into a strain and strain rate dependent contributions. The an isotropic fracture response is characterized for a strain rate of 10-3 /s using notched tension and Hasek punch experiments. It is found that a simple stress state independent version of the anisotropic MMC fracture initiation model provides a reasonable approximation of the observed experimental results.
by Colin Bonatti.
S.M.
Książki na temat "Viscoplastic modeling"
Center, Langley Research, red. Effects of elevated temperature on the viscoplastic modeling of graphite/polymeric composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1991.
Znajdź pełny tekst źródłaOn the thermodynamic framework of generalized coupled thermoeleastic-viscoplastic-damage modeling. Washington, DC: National Aeronautics and Space Administration, 1991.
Znajdź pełny tekst źródłaBING: A BASIC computer program for modeling unsteady flow of Bingham viscoplastic material. [Denver, Colo.]: U.S. Geological Survey, 1989.
Znajdź pełny tekst źródłaSchmidt, Martin J. High pressure and high strain rate behavior of cementitious materials: Experiments and elastic/viscoplastic modeling. 2003.
Znajdź pełny tekst źródłaCzęści książek na temat "Viscoplastic modeling"
Hicher, Pierre-Yves, i Isam Shahrour. "Viscoplastic Behavior of Soils". W Constitutive Modeling of Soils and Rocks, 261–98. London, UK: ISTE, 2013. http://dx.doi.org/10.1002/9780470611081.ch7.
Pełny tekst źródłaYin, Zhen-Yu, Pierre-Yves Hicher i Yin-Fu Jin. "Viscoplastic Modeling of Soft Soils". W Practice of Constitutive Modelling for Saturated Soils, 229–71. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-6307-2_7.
Pełny tekst źródłaFarina, Angiolo, i Lorenzo Fusi. "Viscoplastic Fluids: Mathematical Modeling and Applications". W Lecture Notes in Mathematics, 229–98. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-74796-5_5.
Pełny tekst źródłaChaouki, Hicham, Stéphane Thibodeau, Houshang Alamdari, Donald Ziegler i Mario Fafard. "Viscoplastic Modeling of the Green Anode Forming Process". W Light Metals 2014, 1135–39. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118888438.ch189.
Pełny tekst źródłaChaouki, Hicham, Stéphane Thibodeau, Houshang Alamdari, Donald Ziegler i Mario Fafard. "Viscoplastic Modeling of the Green Anode Forming Process". W Light Metals 2014, 1135–39. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-48144-9_189.
Pełny tekst źródłaWei, Y., C. L. Chow, M. K. Neilsen i H. E. Fang. "Constitutive Modeling of Viscoplastic Damage in Solder Material". W IUTAM Symposium on Creep in Structures, 131–40. Dordrecht: Springer Netherlands, 2001. http://dx.doi.org/10.1007/978-94-015-9628-2_14.
Pełny tekst źródłaSchmidt, Martin J., Oana Cazacu i Mark L. Green. "High-Pressure Behavior of Concrete: Experiments and Elastic/Viscoplastic Modeling". W Materials under Extreme Loadings, 247–66. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118622612.ch11.
Pełny tekst źródłaOka, Fusao, i Sayuri Kimoto. "Elasto-viscoplastic constitutive modeling of the swelling process of unsaturated clay". W Computational Multiphase Geomechanics, 271–90. London: CRC Press, 2021. http://dx.doi.org/10.1201/9781003200031-9.
Pełny tekst źródłaAbida, M., J. Mars, F. Gehring, A. Vivet i F. Dammak. "Anisotropic Elastic–Viscoplastic Modelling of a Quasi-unidirectional Flax Fibre-Reinforced Epoxy Subjected to Low-Velocity Impact". W Design and Modeling of Mechanical Systems—III, 171–78. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-66697-6_17.
Pełny tekst źródłaSenchenkov, Igor K., O. P. Chervinko i M. V. Banyas. "Modeling of Thermomechanical Process in Growing Viscoplastic Bodies with Accounting of Microstructural Transformation". W Encyclopedia of Thermal Stresses, 3147–57. Dordrecht: Springer Netherlands, 2014. http://dx.doi.org/10.1007/978-94-007-2739-7_618.
Pełny tekst źródłaStreszczenia konferencji na temat "Viscoplastic modeling"
van Breemen, L. C. A., L. E. Govaert, H. E. H. Meijer, Albert Co, Gary L. Leal, Ralph H. Colby i A. Jeffrey Giacomin. "Finite Strain Viscoplastic Modeling of Polymer Glasses". W THE XV INTERNATIONAL CONGRESS ON RHEOLOGY: The Society of Rheology 80th Annual Meeting. AIP, 2008. http://dx.doi.org/10.1063/1.2964564.
Pełny tekst źródłaFreed, Alan D. "High temperature viscoplastic ratchetting: Material response or modeling artifact". W Proceedings of the eighth symposium on space nuclear power systems. American Institute of Physics, 1991. http://dx.doi.org/10.1063/1.40162.
Pełny tekst źródłaChow, C. L., X. J. Yang i Edmund Chu. "Viscoplastic Constitutive Modeling of Anisotropic Damage Under Nonproportional Loading". W ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1873.
Pełny tekst źródłaOathes, Tyler J., i Ross W. Boulanger. "Nonlinear Viscoplastic Modeling of the Feijão Dam 1 Failure". W Geo-Congress 2022. Reston, VA: American Society of Civil Engineers, 2022. http://dx.doi.org/10.1061/9780784484067.014.
Pełny tekst źródłaBegum, Naheed, Abderrahim Ouazzi i Stefan Turek. "FEM modeling and simulation of thixo-viscoplastic flow problems". W INTERNATIONAL CONFERENCE ON ELECTRONICS, ENGINEERING PHYSICS, AND EARTH SCIENCE. AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0194833.
Pełny tekst źródłaCuddalorepatta, Gayatri, i Abhijit Dasgupta. "Multi-scale viscoplastic modeling of Pb-free Sn3.0Ag0.5Cu solder interconnects". W Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2010. http://dx.doi.org/10.1109/esime.2010.5464530.
Pełny tekst źródłaAchak, N., B. Bahrar i K. Gueraoui. "Numerical modeling of transient viscoplastic fluid flow in a pipe". W TECHNOLOGIES AND MATERIALS FOR RENEWABLE ENERGY, ENVIRONMENT AND SUSTAINABILITY: TMREES21Gr. AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0093767.
Pełny tekst źródłaMontheillet, Frank, i Gilles A. Roy. "Modeling high strain rate viscoplastic deformations combined with phase changes". W SHOCK COMPRESSION OF CONDENSED MATTER - 2011: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2012. http://dx.doi.org/10.1063/1.3686579.
Pełny tekst źródłaBergstrom, Jorgen S., David J. Quinn, Samual Chow i Sekar M. Govindarajan. "Non-Linear Viscoplastic Material Modeling of the Degradation Response of PLA". W ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/fmd2013-16120.
Pełny tekst źródłaZhang, Feng, Atsushi Yashima, Guan Lin Ye, Hla Aung, Kiyokazu Naitou i Teruo Nakai. "Elasto-Viscoplastic Behavior of Soft Sedimentary Rock, Tests and Its Modeling". W Second Japan-U.S. Workshop on Testing, Modeling, and Simulation in Geomechanics. Reston, VA: American Society of Civil Engineers, 2006. http://dx.doi.org/10.1061/40870(216)12.
Pełny tekst źródłaRaporty organizacyjne na temat "Viscoplastic modeling"
Ross, C. A., N. D. Cristescu i Oana Cazacu. Experiments and Elastic/Viscoplastic Constitutive Modeling of Concrete and Geomaterials. Fort Belvoir, VA: Defense Technical Information Center, marzec 2003. http://dx.doi.org/10.21236/ada413877.
Pełny tekst źródła