Rozprawy doktorskie na temat „Variability”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Variability”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Tërnava, Xhevahire. "Gestion de la variabilité au niveau du code : modélisation, traçabilité et vérification de cohérence". Thesis, Université Côte d'Azur (ComUE), 2017. http://www.theses.fr/2017AZUR4114/document.
Pełny tekst źródłaWhen large software product lines are engineered, a combined set of traditional techniques, such as inheritance, or design patterns, is likely to be used for implementing variability. In these techniques, the concept of feature, as a reusable unit, does not have a first-class representation at the implementation level. Further, an inappropriate choice of techniques becomes the source of variability inconsistencies between the domain and the implemented variabilities. In this thesis, we study the diversity of the majority of variability implementation techniques and provide a catalog that covers an enriched set of them. Then, we propose a framework to explicitly capture and model, in a fragmented way, the variability implemented by several combined techniques into technical variability models. These models use variation points and variants, with their logical relation and binding time, to abstract the implementation techniques. We show how to extend the framework to trace features with their respective implementation. In addition, we use this framework and provide a tooled approach to check the consistency of the implemented variability. Our method uses slicing to partially check the corresponding propositional formulas at the domain and implementation levels in case of 1–to–m mapping. It offers an early and automatic detection of inconsistencies. As validation, we report on the implementation in Scala of the framework as an internal domain specific language, and of the consistency checking method. These implementations have been applied on a real feature-rich system and on three product line case studies, showing the feasibility of the proposed contributions
Zemánek, Ladislav. "Analýza variability srdečního rytmu pomocí entropie". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220014.
Pełny tekst źródłaStorme, Martin. "Variabilité des évaluations de la créativité". Thesis, Paris 5, 2013. http://www.theses.fr/2013PA05H107.
Pełny tekst źródłaThis dissertation is devoted to the study of the variability of creativity evaluations, by focusing ontraining non-experts judges to enhance their expertise. In the theoretical part, various issues related tocreativity, judgment and variability are explored and provide hypotheses for the empirical part. Thefirst series of studies allows justifying the relevance of the application of a simplified model of creativityjudgment inspired by Besemer & O’Quin (1999) to the evaluation by non-experts judges of graphicproducts made by children. The rest of the empirical studies are devoted to the investigation of theeffect of the training on 1) the stability and 2) the expertise of creativity evaluations. The model ofcreative judgments provides the mechanism explaining the effect of the training on the stability andthe expertise of creativity evaluations, by emphasizing the mediating role of stability and expertise ofrelevant predictors evaluation (originality and elaboration) and of the integration function, by which thejudge combines predictors to make a creativity judgment. A final study allows studying the long-termeffect of the training. These results are discussed and future research and applications are suggested
Salan, Jefferson. "Is variability appropriate? Encoding Variability and Transfer-Appropriate Processing". Thesis, Virginia Tech, 2020. http://hdl.handle.net/10919/99414.
Pełny tekst źródłaM.S.
It is well accepted within the episodic memory literature that successful memory retrieval is often driven by context cues. Specifically, the cues that are stored with the memory of the event. To develop a better understanding of how episodic memory works, we must understand how manipulating context cues changes memory performance. One way to investigate the effects of context manipulation is using encoding variability, which refers to the amount of variability (i.e., change) in context cues from one repetition of an item or event, to the next. Preliminary research in our lab (Diana, unpublished data) has found that increased encoding variability improves memory retrieval in a novel context, but it is unclear why this is the case. We proposed that the mental processing described by transfer-appropriate processing (TAP) – a principle stating that memory retrieval success is determined by the match, or overlap, between the mental processing at encoding (i.e., memory formation) and memory retrieval – determines the contextual cues that are stored with the memory at encoding. We hypothesized that encoding variability works even when TAP has already been achieved by matching the processing and cues at encoding to those at retrieval. Alternatively, we hypothesized that encoding variability works by specifically achieving TAP, so that encoding variability is only helpful when the encoding and retrieval contexts do not match. Results indicated partial support for the alternative hypothesis, suggesting that encoding variability works by achieving TAP. However, these results were not sufficiently conclusive, and it is likely that there are other mechanisms that allow for encoding variability to improve memory. This study establishes the groundwork for future work examining encoding variability and its effects on memory.
Santagata, Carmen. "L'utilisation de roches autres que le silex au Paléolithique ancien et moyen : choix économiques, techniques et fonctionnels sur la base de l'étude des gisements de Sainte-Anne 1 (Haute-Loire, France) (MIS 5 et 6) et Notarchirico (Basilicata, Italie) (MIS 14 à 17)". Thesis, Bordeaux 1, 2012. http://www.theses.fr/2012BOR14532/document.
Pełny tekst źródłaThe use of geomaterials different from flint in Early and Middle Paleolithic. Economical technical and functional choices after the study of two sites : Sainte-Anne I (Haute-Loire, France) (MIS 5-7) and Notarchirico (Basilicata, Italy) (MIS 14-17).We tried to answer the question: has the variability of raw materials (from petrographical characteristics and morphological aspects) influenced prehistoric knappers during the production both in time and space? The creation and use of specific descriptive files for each category of objects allowed us to analyze the technical characteristics of the products and to select the variables that played a major role in the assessment of needs at the base of the lithic production. Critical analysis of the litho-stratigraphic contexts and consideration of technical, technological or chronological diversity allows to reconsider the paradigms underlying the differentiation of the techniques: products façonnage (double sided, ébauche), Levallois production system, discoid production system. These terms have for too long concealed the variability of the characters in Paleolithic lithic production. We have now to reconsider the purposes of lithic studies and to aim to decipher the plurality of individuals and palaeolithic societies behaviours
L’utilizzazione delle rocce diverse dalla selce nel Paleolitico antico e medio : scelte economiche, tecniche e funzionali, sulla base dello studio dei siti di Sainte-Anne I (Haute-Loire, France) (SIO 5-7) e di Notarchirico (Basilicata, Italia) (SIO 14-17).La questione principale alla quale abbiamo tentati di rispondere è la seguente: la variabilità delle materie prime (caratteristiche petrografiche e morfologia dei supporti) ha condizionato gli uomini preistorici durante la produzione nel tempo e nello spazio? La creazione e l’utilizzo di schede di analisi specifiche per ogni categoria di oggetti ci ha permesso di analizzare i caratteri tecnici specifici dei prodotti e di selezionare le variabili principali che hanno giocato un ruolo importante nella valutazione delle necessità alla base della produzione litica. L’analisi critica dei contesti lito-stratigrafici e la considerazione delle diversità tecnica, tecnologica o cronologica delle industrie permette di riconsiderare i paradigmi alla base della differenziazione delle tecniche: prodotti del façonnage bifacciale (bifacciale, ébauche), sistema di produzione Levallois, sistema di produzione Discoide. Questi termini hanno per troppo tempo celato la variabilità dei caratteri che durante il Paleolitico era necessario prendere in considerazione nella produzione litica. Adesso bisogna dare un nuovo indirizzo agli studi, indirizzandoli verso la presa di coscienza della pluralità dei comportamenti umani e delle società paleolitiche
Vo, Van Olivier. "Introduction of variability into pantograph-catenary dynamic simulations". Thesis, Paris, ENSAM, 2016. http://www.theses.fr/2016ENAM0021/document.
Pełny tekst źródłaIn railways, electrical current is generally collected by the train through a complex coupledmechanical system composed of a pantograph and a catenary. Dynamic phenomena that occur duringtheir interaction are still not fully understood. Furthermore, the system behaviour is sensitive to numerousparameters and thus highly variable. The first contribution of this thesis is a detailed analysis of thepantograph-catenary dynamic interaction separating phenomena due to the dynamic response of the pantographto the catenary geometry from wave propagations, reflections and transmissions that occur in thecatenary. The coincidence of frequencies or characteristic times is then shown to explain most variationsin the quantities of interest. Moreover, droppers surrounding the mast have been shown to be particularlyimportant in dynamic interaction. Ratio of wire impedances and sum of wave velocities also appeared tobe dimensioning quantities for catenary design. The second contribution was to reduce epistemic uncertaintylinked with model parameters such as catenary damping, contact stiffness and element size. Thefinal contribution was to use the model in a configuration with random parameters. An initial step was tostatistically characterise physical catenary parameters using available measurements. From this randommodel, ranking of uncertainties using Sobol indices on static and dynamic criteria was shown to be possible.An absence of correlation between geometric and dynamic criteria was also found, which has notableimplications for maintenance policies. The high number of sensitivity studies also gave the occasion tohighlight the maturity of simulation tool and propose directions for further work on design, maintenance orcertification of pantographs and catenaries
Velayudhan, Vikas. "TCAD study of interface traps-related variability in ultra-scaled MOSFETs". Doctoral thesis, Universitat Autònoma de Barcelona, 2016. http://hdl.handle.net/10803/400200.
Pełny tekst źródłaThe work developed in this thesis has focused on the analysis and study of the impact on the variability of ultra-scaled MOSFETs due to the number and spatial distribution of interfacial traps. In the study, the number of locations where traps were located were randomly varied, but the total charge in the entire device was always maintained constant. Initially 2D simulations of interfacial traps located along the channel of the transistor and its influence on Vth was analyzed. The analysis was started with the case of a single location, analyzing the influence of channel length and drain voltage, and the case of 2 and multiple locations were analyzed. Subsequently, the analysis was extended to 3D simulations, simulating interfacial traps distributed across the transistor. Finally, the effect of interfacial traps was analyzed not only on Vth but also on Ion. For a more realistic vison of the effect of interfacial traps variability on ultra-scaled MOSFET transistors, the study was extended to 3D simulations of a device WxL = 50nm x 20nm. The results showed that the location of traps along the channel has more influence than its position at the edge of the channel. In addition, when the case of two traps were considered, it was observed that if they were close together their influence is less than if they were sufficiently separated. The results were interpreted in terms of changes in the area of potential barrier created by the position of the traps. Devices were simulated with different number of locations at random positions and compared to the 2D results, a 'turn around' effect was observed in the dependence of Vth (mean value) and σVth. The initial increase in Vth was attributed to an increase in area of the effective barrier with the increase in the number of locations. The subsequent decrease observed in Vth with the increase in the number of locations was attributed to an increased likelihood of having traps very close to one another resulting in a decrease in the effective area of the barrier, along with the charge scaling at each location. It was also noted that σVth follows the Pelgrom’s law and that the width of the device plays a dominant role in this dependence. Furthermore, it has also been found that the spatial distribution of the traps affects the Ion. The results showed that the location of traps along the channel fundamentally influences Vth, while the distribution of traps channel along the width affects mostly Ion. These dependencies explain the asymmetries found in the Id-Vg characteristics of transistors. The work could be continued by analyzing the impact of distributions of traps in dynamic conditions, as in the mechanisms of RTN or BTI. The main applicability of the results of this thesis lies in the field of reliability of ultra-scaled MOSFETs. The contributions made in this thesis contribute to understand the effect of the number and the spatial distribution of interfacial traps that can arise with mechanisms such as Bias Temperature Instabilities (BTI), Hot Carrier Injection (HCI) or Random Telegraph Noise (RTN) that can reduce device reliability and result in the dispersion of the characteristics of MOSFETs.
Uhlig, Stefan. "Heart Rate Variability". Doctoral thesis, Universitätsbibliothek Chemnitz, 2018. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-233101.
Pełny tekst źródłaTurner, John. "Antarctic climate variability". Thesis, University of East Anglia, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.396624.
Pełny tekst źródłaSajjadi, Samad. "Variability in interlanguage". Thesis, University of Reading, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.359533.
Pełny tekst źródłaMinns, Alan Ronald. "Low frequency variability". Thesis, University of Cambridge, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.624871.
Pełny tekst źródłaLee, Coral Em. "Order effects of variability-contingent and variability-independent point delivery: Effects on operant variability and target sequence acquisition". Thesis, University of North Texas, 2004. https://digital.library.unt.edu/ark:/67531/metadc4502/.
Pełny tekst źródłaNeff, Bryon (Bryon R. ). "Examining the Relationship between Variability in Acquisition and Variability in Extinction". Thesis, University of North Texas, 1997. https://digital.library.unt.edu/ark:/67531/metadc279279/.
Pełny tekst źródłaCouso, Fontanillo Carlos. "Analysis of impact of nanoscale defects on variability in mos structures". Doctoral thesis, Universitat Autònoma de Barcelona, 2018. http://hdl.handle.net/10803/650408.
Pełny tekst źródłaOver the last years, the information and its analysis have become in the corner stone of growth of our society allowing the sharing economy, globalization of products and knowledge, block-chain technology etc. Huge companies such as: Amazon, Facebook, Google... which were aware of the potential of these resources, are developing vast infrastructures in order to extract as much information as possible about our environment (Internet of Things) or ourselves (social media, smart-phones...), process this information (Big Data Centers) and transmit it quickly all over the world. However, this challenge requires electronic devices with higher performance and low power consumption, which cannot be developed using the conventional scaling techniques because the dimensions of devices have reached the atomic range. In this range of dimensions, the impact of the discrete of matter and charge increases inevitably the variability of devices. Among different variability sources, Interface traps (IT), Random Dopant Distributions (RDD), Line Edge Roughness (LER) and Poly Gate Granularity (PGG) have been identified as the most prominent ones. Consequently, the scientific community is exploring new solutions such as, alternative device materials and/or structures, in order to overcome the different issues owing to the scaling. In this context, this thesis, which is structure in 7 chapters, will try to contribute to solve this problem, analyzing the impact of interface traps and defects on device variability. In order to introduce to the reader, in chapter 1 the charge transport theory through a semiconductor and metal junction (Schottky contact) and the Metal-Oxide-Semiconductor Field Effect Transistor (MOSFET) device are explained. Besides, the concept of variability and different sources of variability are also presented. In the second chapter, advanced characterization techniques, such as, Conductive Atomic Force Microscopy (CAFM) and Kelvin Prove Force Microscopy (KPFM) used to obtain nanoscale information are described in detail. After that, the TCAD device simulator called ATLAS is explained. Here, the models and their limitations to simulate the electronic devices are discussed. Third chapter is devoted to describe the impact of threading dislocation (TD) defects on the conduction through a schottky contact formed by a III-V semiconductor material (InGaAs) and a metal. Here, different conduction mechanisms, Poole Frenkel (PF) and Thermionic Emission (TE), have been associated to the conduction through areas with TD and without TD, respectively, proving that III-V materials with high density of TD showing higher leakage current. In chapter four, the development of a simulator called (NAnoscale MAp Simulator (NAMAS)) to generate automatically topography and density charge maps from inputs obtained from CAFM measurements (topography and current maps) of a given sample is explained. From the generated maps, the impact of the oxide thickness and the charge density fluctuations on MOSFET variability is studied. In chapter five, the impact of interface traps in the gate oxide on device variability is analyzed. Firstly, the impact of interface discrete fixed charges on 65 nm technology MOSFET devices with different dimensions is studied (time-zero variability), where a deviation of Pelgrom's law is proved by experimental and TCAD simulation data. Next, the dynamic behavior of traps is analyzed by TCAD transient simulation in order to estimate their physical parameters of traps from empiric parameters. Chapter six is devoted to study the performance and power consumption trade-off in Ultra-thin Body and Buried Oxide Fully Depleted Silicon on Insulator (UTBB FDSOI) MOSFET when it is operated in near-threshold voltage. Besides, the impact of traps in gate oxide / channel and in buried oxide / channel interfaces on the performance and power consumption of device is also analyzed. Finally, the more relevant conclusions are highlighted.
Maggioni, Mezzomo Cecilia. "Caractérisation et modélisation des fluctuations aléatoires des paramètres électriques des dispositifs en technologies CMOS avancées". Thesis, Grenoble, 2011. http://www.theses.fr/2011GRENT044/document.
Pełny tekst źródłaThis research characterizes and models the mismatch of electrical parameters in advanced MOS transistors. All characterizations are made through a test structure, which is experimentally validated using a structure based on Kelvin method. A model, valid in the linear region, is proposed. It is used for modeling the threshold voltage fluctuations of the transistors with pocket-implants, for any transistor length and gate voltage. It gives a deep understanding of the mismatch, especially for devices with non-uniform channel. Another study analyzes the mismatch of the drain current by characterizing and modeling in terms of the drain voltage. A second model is then proposed for transistors without pocket-implants. In order to apply this model, the correlation of threshold voltage fluctuations and mobility fluctuations must be considered. Characterizations are also performed on transistors with pocket-implants, showing a new drain current mismatch behavior for long transistors. Finally, characterizations are made to analyze the impact of gate roughness fluctuations on mismatch
Mordel, Patrick. "Variabilité glycémique : exploration in vitro des fonctions cellulaires et mitochondriales sur la lignée de cardiomyocyte HL-1". Thesis, Normandie, 2017. http://www.theses.fr/2017NORMC415/document.
Pełny tekst źródłaDiabetes mellitus is associated with higher risk of cardiovascular disease and metabolism dysregulation. Glycemic variability (GV) has been suggested as a risk factor in diabetic complication. In order to characterize dysfunctions induced by GV, we developed an in vitro model that transpose GV on the cardiac cell line HL-1. We exposed our cells to a treatment of 12 hours miming hypoglycemia, normoglycemia, hyperglycemia and GV. The exploration of signaling pathways didn’t allow us to show a deleterious effect of glucose fluctuation. However we were able to point mitochondrial alteration under glucose fluctuation. HL-1 cells mitochondria exhibit a higher membrane potential and an increase of superoxide anion production. Although we didn’t show any alteration in mitochondrial respiration after 12 hours of exposition, we showed that after 72 hours of glucose fluctuation, HL-1 cells showed a decrease in mitochondrial respiration. We finally studied the impact of glucose fluctuation on the susceptibility to develop hypoxic injuries. We showed that after 36 hours of hypoxia, injuries were higher for cells exposed to glucose fluctuation. Our results indicate a deleterious effect of GV, but additional experiments are needed to better characterize the mechanisms
Barizien, Antoine. "Studying the variability ofbacterial growth in microfluidicdroplets". Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLX020/document.
Pełny tekst źródłaThis thesis presents some results about the variability of the growth of bacteria in microfluidics droplets. In the first chapter, the microfluidic chip used throughout the PhD is presented. It allows to encapsulate bacteria in an array of 1.500 nano-liter sized droplets, and to follow their growth in each droplet in parallel through fluorescence microscopy. The link between the measured fluorescence and the number of bacteria in a droplet is discussed, and other technical questions are addressed, such as the variability in droplet size and the cell-to-cell fluorescence variability. Next, we develop a stochastic model to account for the observed variability of population size in the droplet during the exponential phase of growth. A well-known stochastic model, the Bellman-Harris model, is adapted to take into account the external sources of randomness due to our experimental system (initial distribution of bacteria per droplet, different division time of the first generations). They are taken into account, along with the effects of the cell-to-cell variability of division times in our model, which is successful to predict the variability observed in the microfluidics experiments. Then we tackle the inverse problem, which is to recover the cell-to-cell variability from the observation of the growth in droplets. We propose an inference scheme based on following each droplet in time. The deviation from pure exponential growth is linked back to the cell-to-cell variability, and this inference scheme is proven to be successful on simulations that mimic the experimental constrains. However, we cannot completely apply it to our experiments because of a lack of accuracy in our fluorescence measurements. Finally, we demonstrate how our chip can represent a gain of space and time to quantify the effect of antibiotics on a bacterial strain compared to classical susceptibility measurement methods. We also show how it can be used to study the variability of the SOS response of bacteria, which is a bacterial stress response induced when the DNA of the cell is damaged, and relate it to the ability to survive an antibiotic treatment
Bartoň, Vojtěch. "Analýza genetické variability v sekvenačních datech treponemálních kmenů". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-378144.
Pełny tekst źródłaArmshaw, Jared T. "Variability in the Natural World: An Analysis of Variability in Preschool Play". Thesis, University of North Texas, 2020. https://digital.library.unt.edu/ark:/67531/metadc1707331/.
Pełny tekst źródłaCassinelli, Joe P. "Discussion: Magnetic fields, variability". Universität Potsdam, 2007. http://opus.kobv.de/ubp/volltexte/2008/1819/.
Pełny tekst źródłaMeyer, Peter, i Rasmus Åström. "Eliminating Variability Through Standardization". Thesis, Örebro universitet, Institutionen för naturvetenskap och teknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-51841.
Pełny tekst źródłaSyftet med det genomförda examensarbetet var att undersöka och analysera vilka effekter logistik och hantering haft på hållfastheten av lastningsbärare för att ta fram ett lösningsförslag på hur brott kan förebyggas. Från införda standarder och riktlinjer, presenterade i det här examensarbetet kan reklamationskostnader, ekologiska kostnader och skaderisker kraftigt minimeras. Processkartläggning och risk sökning, Arkiv- och litteraturstudier, Ishikawa- kartläggning, fallstudie och intervjuer genomfördes och användes för att få fram resultatet. Med de använda metoderna kunde två problemområden hittas och undersökas. Analysering av dessa problemområden ledde till en rekommendation om applicering av standardiserat arbete.
Bashir, Furrukh, i Furrukh Bashir. "Hydrometeorological Variability over Pakistan". Diss., The University of Arizona, 2017. http://hdl.handle.net/10150/626357.
Pełny tekst źródłaJohnson, Kristien Paul. "Variability of ionic magnesium". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/MQ60850.pdf.
Pełny tekst źródłaBelokurov, Vasily. "Variability surveys in astronomy". Thesis, University of Oxford, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.401024.
Pełny tekst źródłaPickering, J. B. "Auditory vowel formant variability". Thesis, University of Oxford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.375999.
Pełny tekst źródłaRiffle, Travis Lee. "Variability in Auditory Distraction". Ohio University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1565870603158009.
Pełny tekst źródłaBishop, Michele R. "Resurgence of operant variability /". abstract and full text PDF (UNR users only), 2008. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3329717.
Pełny tekst źródła"August, 2008." Includes bibliographical references (leaves 92-100). Library also has microfilm. Ann Arbor, Mich. : ProQuest Information and Learning Company, [2009]. 1 microfilm reel ; 35 mm. Online version available on the World Wide Web.
Hilder, James Alan. "Evolving variability tolerant logic". Thesis, University of York, 2010. http://etheses.whiterose.ac.uk/1334/.
Pełny tekst źródłaŠkrtel, Karol. "Analýza variability srdečního rytmu". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2008. http://www.nusl.cz/ntk/nusl-217454.
Pełny tekst źródłaGhesini, Silvia <1974>. "Molecular Variability in Isoptera". Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2010. http://amsdottorato.unibo.it/2930/1/ghesini_silvia_tesi.pdf.
Pełny tekst źródłaGhesini, Silvia <1974>. "Molecular Variability in Isoptera". Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2010. http://amsdottorato.unibo.it/2930/.
Pełny tekst źródłaHubeika, Valiantsina. "Intersession Variability Compensation in Language and Speaker Identification". Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2008. http://www.nusl.cz/ntk/nusl-235432.
Pełny tekst źródłaKostečka, Petr. "Posouzení stability procesu". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230076.
Pełny tekst źródłaDixon, Paul David. "Stability and variability of physiological control determined from heart rate variability in infants". Thesis, Imperial College London, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.368644.
Pełny tekst źródłaAkyel, Kaya Can. "Statistical methodologies for modelling the impact of process variability in ultra-deep-submicron SRAMs". Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENT080/document.
Pełny tekst źródłaThe downscaling of device geometry towards its physical limits exacerbates the impact of the inevitable atomistic phenomena tied to matter granularity. In this context, many different variability sources raise and affect the electrical characteristics of the manufactured devices. The variability-aware design methodology has therefore become a popular research topic in the field of digital circuit design, since the increased number of transistors in the modern integrated circuits had led to a large statistical variability affecting dramatically circuit functionality. Static Random Access Memory (SRAM) circuits which are manufactured with the most aggressive design rules in a given technology node and contain billions of transistor, are severely impacted by the process variability which stands as the main obstacle for the further reduction of the bitcell area and of its minimum operating voltage. The reduction of the latter is a very important parameter for Low-Power design, which is one of the most popular research fields of our era. The optimization of SRAM bitcell design therefore has become a crucial task to guarantee the good functionality of the design at an industrial manufacturing level, in the same time answering to the high density and low power demands. However, the long time required by each new technology node process development means a long waiting time before obtaining silicon results, which is in cruel contrast with the fact that the design optimization has to be started as early as possible. An efficient SPICE characterization methodology for the minimum operating voltage of SRAM circuits is therefore a mandatory requirement for design optimization. This research work concentrates on the development of the new simulation methodologies for the modeling of the process variability in ultra-deep-submicron SRAMs, with the ultimate goal of a significantly accurate modeling of the minimum operating voltage Vmin. A particular interest is also carried on the time-dependent sub-class of the process variability, which appears as a change in the electrical characteristics of a given transistor during its operation and during its life-time. This research work has led to many publications and one patent application. The majority of findings are retained by STMicroelectronics SRAM development team for a further use in their design optimization flow
Baum, David. "Variabilitätsextraktion aus makrobasierten Software-Generatoren". Master's thesis, Universitätsbibliothek Leipzig, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-132719.
Pełny tekst źródłaDenis, Yvan. "Implémentation de PCM (Process Compact Models) pour l’étude et l’amélioration de la variabilité des technologies CMOS FDSOI avancées". Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAT045/document.
Pełny tekst źródłaRecently, the race for miniaturization has seen its growth slow because of technological challenges it entails. These barriers include the increasing impact of the local variability and processes from the increasing complexity of the manufacturing process and miniaturization, in addition to the difficult of reducing the channel length. To address these challenges, new architectures, very different from the traditional one (bulk), have been proposed. However these new architectures require more effort to be industrialized. Increasing complexity and development time require larger financial investments. In fact there is a real need to improve the development and optimization of devices. This work gives some tips in order to achieve these goals. The idea to address the problem is to reduce the number of trials required to find the optimal manufacturing process. The optimal process is one that results in a device whose performance and dispersion reach the predefined aims. The idea developed in this thesis is to combine TCAD tool and compact models in order to build and calibrate what is called PCM (Process Compact Model). PCM is an analytical model that establishes linkages between process and electrical parameters of the MOSFET. It takes both the benefits of TCAD (since it connects directly to the process parameters electrical parameters) and compact (since the model is analytic and therefore faster to calculate). A sufficiently robust predictive and PCM can be used to optimize performance and overall variability of the transistor through an appropriate optimization algorithm. This approach is different from traditional development methods that rely heavily on scientific expertise and successive tests in order to improve the system. Indeed this approach provides a deterministic and robust mathematical framework to the problem. The concept was developed, tested and applied to transistors 28 and 14 nm FD-SOI and to TCAD simulations. The results are presented and recommendations to implement it at industrial scale are provided. Some perspectives and applications are likewise suggested
Číhal, Martin. "Analýza variability srdečního rytmu pomocí fraktální dimenze". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2013. http://www.nusl.cz/ntk/nusl-220052.
Pełny tekst źródłaClèries, Soler Ramon. "Geographic Variability in Liver Cancer". Doctoral thesis, Universitat Autònoma de Barcelona, 2006. http://hdl.handle.net/10803/4627.
Pełny tekst źródłaThe first study, entitled "Meta-analysis of cohort studies of risk of liver cancer death among HBV carriers", evaluates the variability in PLC mortality reported in 11 cohort studies of male HBV carriers, taking into consideration the effects of geographic area and the choice of the general population versus a more comparable group such as HBV-negative workers or blood donors as the comparison group. The statistical methods of this study focuses on mixtures of Poisson distributions. The "stickbreaking" method has been used to estimate the number of components of the mixture of Poisson distributions, and, thus to obtain a pooled relative risk (RR) of death for PLC among male HBV carriers. The pooled RR of death by PLC related to HBV infection was 23.5 (95% Credibility Interval (CRI): 14.9 - 44.5). Studies carried out in high risk areas for PLC (China and Taiwan) showed RRs 2 to 5-fold higher than those of studies carried out in Europe, Japan and the U.S.. In low risk areas for PLC, studies which used workers or blood donors as comparison groups had RRs 1.9-fold higher (95% CRI: 1.2 - 3.1) than studies which used the general population. However, in high risk areas, the ratio of RRs was 5.3-fold (95% CRI: 3.4 - 7.9). This is the first time that a "healthy donor effect" has been quantified in longitudinal studies.
The second study, entitled "Geographic distribution of primary liver cancer in Europe in 2002" evaluates the effect of HBV and HCV seroprevalence in 38 European countries on PLC incidence and mortality. Mixed Poisson models based on Bayesian inference have been used to smooth Standardized Incidence (SIR) and Mortality (SMR) ratios for PLC accounting for the effect of HBV and HCV prevalences. This approach enabled us to both examine the effect of different levels of HBV and HCV, and to identify remaining variability in PLC after accounting for infection rates. Bayesian inference allowed the determination of posterior probabilities for the somoothed SIRs and SMRs (hereafter RRs). The Deviance Information Criterion (DIC) and the "effective number of parameters" (pD) have been used as tools for model choice. The highest mortality and incidence PLC RRs were found in Southern European countries (RR range 0.9-2.4), whereas Northern European countries showed the lowest RRs (RR range: 0.3-0.9). The effect of HBV infection was not found to be statistically significant in the model which accounted for both HBV and HCV prevalence. Countries with a prevalence of HCV higher than 2% (e.g.: Italy and Spain) had a higher risk of incidence and mortality (RR range: 1.28 - 1.78) than countries with HCV prevalence below 1%. Thus, the high risk of PLC detected in Southern Europe appears to be explained, in part, by HCV infection. The high HCV seroprevalence in this area could be associated with exposure 30-50 years ago. There may be an underestimation of PLC incidence and mortality rates in Eastern European countries given the low PLC RRs reported, despite high HBV and HCV seroprevalences observed. The implementation of population-based cancer registries in Eastern European countries is warranted, as well as HCV prevalence studies across Europe, to better determine the distribution of PLC in Europe and its relationship with that virus.
The last study, entitled "Time trends in liver disease in Spain during the period 198397", describes incidence and mortality trends in hepatocellular carcinoma and cholangiocarcinoma as well as mortality trends in liver cirrhosis in Spain. Autoregressive age-period-cohort (APC) models have been used to evaluate the time trends. We found that APC models performed well for those liver diseases with large number of cases, whereas the age-period models did for those liver diseases with low number of cases. We found an increase in incidence and mortality of hepatocellular carcinoma in Spain (annual percent change (APCH) in men's incidence: 6.6%, 95% CRI: 5.8, 8.1: APCH in women's incidence: 4.5%, 95% CRI: 1.4%, 7.3%; APCH in men's mortality: 6.8%, 95% CRI: 5.8%, 8.1%; APCH in women's mortality: 5.1%, 95% CRI: 3.5%, 6.3%), that appear to be related to HCV exposure 30 years ago, as described in other studies of PLC. We also found an increasing trend in cholangiocarcinoma mortality (APCH in men: 17.1%, 95% CRI: 13.5%, 21.2%; APCH in women: 15.0%, 95% CRI: 11.5%, 19.5%) similar to that found in some developed countries, that could be attributed to improvement in diagnosis resulting from better imaging and diagnostic techniques. However, we did not detect a significant increasing trend in cholangiocarcinoma incidence, perhaps due to the low number of cases reported by the Spanish cancer registries. We have observed a decreasing trend in cirrhosis mortality in both sexes during the study period (APCH in men: -3.1%, 95% CRI: -5.1, -1.9%; APCH in women: -2.9%; 95% CRI: -6.2%, -1.3%), although younger cohorts did not show this pattern. This cohort effect suggests the possibility that younger cohorts could be exposed to some additional risk factors besides alcohol consumption. HIV and HCV or HBV co-infection and intravenous drug addiction could explain the increase in liver cirrhosis mortality among younger cohorts.
The flexibility of the Bayesian approach allowed us to cope with extra-Poisson variability in three statistical analyses, applying different models, and addressing relevant methodological aspects specific to each problem. Challenging statistical issues in the framework of Bayesian applied modelling are: i) the selection of prior distributions for model parameters, which is related to convergence of the model; and ii) model selection procedures, and these remain important considerations for future research.
Marciniak, Jennifer Yuko. "Variability in eukaryotic gene expression /". Diss., Connect to a 24 p. preview or request complete full text in PDF formate. Access restricted to UC campuses, 2005. http://wwwlib.umi.com/cr/ucsd/fullcit?p3208639.
Pełny tekst źródłaHo, Kwan-wai Annie. "Variability of cleft palate speech". Click to view the E-thesis via HKUTO, 2001. http://sunzi.lib.hku.hk/hkuto/record/B36207883.
Pełny tekst źródła"A dissertation submitted in partial fulfilment of the requirements for the Bachelor of Science (Speech and Hearing Sciences), The University of Hong Kong, May 4, 2001." Also available in print.
Stemmer, Georg. "Modeling variability in speech recognition /". Berlin : Logos-Verl, 2005. http://deposit.ddb.de/cgi-bin/dokserv?id=2659313&prov=M&dok_var=1&dok_ext=htm.
Pełny tekst źródłaAkram, Asif, i Qammer Abbas. "COMPARISON OF VARIABILITY MODELING TECHNIQUES". Thesis, Jönköping University, JTH, Computer and Electrical Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-9643.
Pełny tekst źródłaVariability in complex systems offering rich set of features is a seriouschallenge to their users in term of flexibility with many possible variants fordifferent application contexts and maintainability. During the long period oftime, much effort has been made to deal with these issues. An effort in thisregard is developing and implementing different variability modelingtechniques.This thesis argues the explanation of three modeling techniques namedconfigurable components, feature models and function-means trees. The maincontribution to the research includes:• A comparison of above mentioned variability modeling techniques in asystematic way,• An attempt to find the integration possibilities of these modelingtechniques based on literature review, case studies, comparison,discussions, and brainstorming.The comparison is based on three case studies each of which is implemented inall above mentioned three modeling techniques and a set of generic aspects ofthese techniques which are further divided into characteristics. At the end, acomprehensive discussion on the comparison is presented and in final sectionsome integration possibility are proposed on the basis of case studies,characteristics, commonalities and experience gained through theimplementation of case studies and literature review.
Lee, Chien-Hsiu. "Microlensing and Variability towards M31". Diss., lmu, 2011. http://nbn-resolving.de/urn:nbn:de:bvb:19-132307.
Pełny tekst źródłaKlaube, Maximilian. "Spatial Variability of shotcrete thickness". Thesis, KTH, Jord- och bergmekanik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-224933.
Pełny tekst źródłaTaing, Nguonly. "Run-time Variability with Roles". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2018. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-234933.
Pełny tekst źródłaGroot, Paul Joseph. "Optical variability in compact sources". [Amsterdam] : Amsterdam : Sterrenkundig Instituut 'Anton Pannekoek' ; Universiteit van Amsterdam [Host], 1999. http://dare.uva.nl/document/92169.
Pełny tekst źródłaSlauson, Leigh Victoria. "Students' conceptual understanding of variability". Columbus, Ohio : Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1199117318.
Pełny tekst źródłaBerger, Thorsten. "Variability Modeling in the Real". Doctoral thesis, Universitätsbibliothek Leipzig, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-113623.
Pełny tekst źródłaJewson, Stephen P. "Decadal and interdecadal climate variability". Thesis, University of Oxford, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.308590.
Pełny tekst źródła