Gotowa bibliografia na temat „Vapor Mediated Interactions”

Water is ubiquitous in the environment and is present to varying degrees even within dry powder products and most ingredients. Water migration between the environment and a solid, or between different components of a product, may lead to detrimental physical and chemical changes. In efforts to optimize the quality of dry products, as well as the efficiency of production practices, it is crucial to understand the cause–effect relationships of water interactions with different solids. Therefore, this review addresses the basis of moisture migration in dry products, and the modes of water vapor interactions with crystalline and amorphous solids (e.g., adsorption, capillary condensation, deliquescence, crystal hydrate formation, absorption into amorphous solids) and related moisture-induced phase and state changes, and provides examples of how these moisture-induced changes affect the quality of the dry products.

Abstract Two decades of high-resolution satellite observations and climate modeling studies have indicated strong ocean–atmosphere coupled feedback mediated by ocean mesoscale processes, including semipermanent and meandrous SST fronts, mesoscale eddies, and filaments. The air–sea exchanges in latent heat, sensible heat, momentum, and carbon dioxide associated with this so-called mesoscale air–sea interaction are robust near the major western boundary currents, Southern Ocean fronts, and equatorial and coastal upwelling zones, but they are also ubiquitous over the global oceans wherever ocean mesoscale processes are active. Current theories, informed by rapidly advancing observational and modeling capabilities, have established the importance of mesoscale and frontal-scale air–sea interaction processes for understanding large-scale ocean circulation, biogeochemistry, and weather and climate variability. However, numerous challenges remain to accurately diagnose, observe, and simulate mesoscale air–sea interaction to quantify its impacts on large-scale processes. This article provides a comprehensive review of key aspects pertinent to mesoscale air–sea interaction, synthesizes current understanding with remaining gaps and uncertainties, and provides recommendations on theoretical, observational, and modeling strategies for future air–sea interaction research. Significance Statement Recent high-resolution satellite observations and climate models have shown a significant impact of coupled ocean–atmosphere interactions mediated by small-scale (mesoscale) ocean processes, including ocean eddies and fronts, on Earth’s climate. Ocean mesoscale-induced spatial temperature and current variability modulate the air–sea exchanges in heat, momentum, and mass (e.g., gases such as water vapor and carbon dioxide), altering coupled boundary layer processes. Studies suggest that skillful simulations and predictions of ocean circulation, biogeochemistry, and weather events and climate variability depend on accurate representation of the eddy-mediated air–sea interaction. However, numerous challenges remain in accurately diagnosing, observing, and simulating mesoscale air–sea interaction to quantify its large-scale impacts. This article synthesizes the latest understanding of mesoscale air–sea interaction, identifies remaining gaps and uncertainties, and provides recommendations on strategies for future ocean–weather–climate research.

Plasmons associated with zero-dimensional (0D) metal nanoparticles and their synergistic interactions with excitons in two-dimensional (2D) semiconductors offer opportunities for remarkable spectral tunability not otherwise evident in the pristine parent materials. As a result, an in-depth study elucidating the nature of the plasmonic and excitonic interactions, jointly referred to as plexcitons, is critical to understanding the foundational aspects of the light–matter interactions in hybrid 0D–2D systems. In this work, our focal point is to examine the plexcitonic interactions of van der Waals (vdWs) hybrid structures composed of 2D WSe2 and 0D Au nanoparticles (Au-NPs) in their spherical (Au-Sp) and bi-pyramidical (Au-BP) architectures. The geometry-dependent surface plasmon resonance (SPR) peaks in Au-Sp and Au-BP nanoparticles were deciphered using ultraviolet-visible (UV-Vis) optical absorption spectroscopy, while photoluminescence spectroscopy revealed the excitonic behavior in the vapor synthesized monolayer (1L) WSe2 as well as the Au-Sp/WSe2 and Au-BP/WSe2 hybrids. Furthermore, our temperature-dependent and wavelength-dependent optoelectronic transport measurements showed a shift in the spectral response of 1L WSe2 toward the SPR peak locations of Au-Sp and Au-BP, mediated via the plexciton interactions. Models for the plexcitonic interactions are proposed, which provide a framework to explain the photoexcited hot charge carrier injection from AuNPs to WSe2 and their influence on carrier dynamics. Our findings demonstrate that geometry-mediated response of the AuNPs provides another degree of freedom to modulate the carrier photodynamics in WSe2, which can also be useful for tailoring the optoelectronic performance of the broader class of semiconducting 2D materials.

Tobacco is the primary etiologic agent in worsened lung squamous cell carcinoma (LUSC) outcomes. Meanwhile, it has been shown that etiologic agents alter enhancer RNAs (eRNAs) expression. Therefore, we aimed to identify the effects of tobacco and electronic cigarette (e-cigarette) use on eRNA expression in relation to LUSC outcomes. We extracted eRNA counts from RNA-sequencing data of tumor/adjacent normal tissue and before/after e-cigarette tissue from The Cancer Genome Atlas (TCGA) and the Gene Expression Omnibus (GEO), respectively. Tobacco-mediated LUSC eRNAs were correlated to patient survival, clinical variables, and immune-associated elements. eRNA expression was also correlated to mutation rates through the Repeated Evaluation of Variables Conditional Entropy and Redundance (REVEALER) algorithm and methylated sites through methylationArrayAnalysis. Differential expression analysis was then completed for the e-cigarette data to compare with key tobacco-mediated eRNAs. We identified 684 downregulated eRNAs and 819 upregulated eRNAs associated with tobacco-mediated LUSC, specifically, with the cancer pathological stage. We also observed a decrease in immune cell abundance in tobacco-mediated LUSC. Yet, we found an increased association of eRNA expression with immune cell abundance in tobacco-mediated LUSC. We identified 16 key eRNAs with significant correlations to 8 clinical variables, implicating these eRNAs in LUSC malignancy. Furthermore, we observed that these 16 eRNAs were highly associated with chromosomal alterations and reduced CpG site methylation. Finally, we observed large eRNA expression upregulation with e-cigarette use, which corresponded to the upregulation of the 16 key eRNAs. Our findings provide a novel mechanism by which tobacco and e-cigarette smoke influences eRNA interactions to promote LUSC pathogenesis and provide insight regarding disease progression at a molecular level.

A theory for obtaining meniscus forces and profiles for any given liquid-mediated interface is presented that includes the effects of surface interactions, adsorption and evaporation of liquid films. The meniscus force is obtained from the derivative of the total free energy of liquid-mediated interface, which requires the meniscus profile to be known. The meniscus profile is the solution of a second-order differential equation, as derived from Pascal’s law for static incompressible liquids with inclusion of surface interactions. For nonvolatile liquid films, the total liquid amount at the interface is a conserved quantity, whereas for volatile liquids, the liquid films are in thermodynamic equilibrium with their respective vapor phase. Two typical types of initial liquid conditions are considered. Type I represents the case in which one surface is wet and the other is initially dry, having a finite contact angle with the liquid. Type II represents the situation in which both surfaces are wet by either a liquid or by two different liquids before making contact. If two or more types of liquids are involved at the interface, miscibility of the liquids and interactions due to other liquid(s) have to be also considered. For contacts with azimuthal geometry, which is merely a mathematical convenience, such as ellipsoidal/spherical, conical or crater, the theory generates several analytical formulae for calculating meniscus forces without involving meniscus profiles. These formulae can be handily applied to various surface probes techniques such as Scanning Probe Microscopy or Surface Force Apparatus. The proposed theory is also applicable to “meniscus rings” formed around crater geometry, such as encountered in laser-textured magnetic disks. In this case, the outer meniscus ring can be asymmetric to the inner meniscus ring if no liquid passage exists between the inner and outer meniscus ring. Even for the case of spherical contact geometry, the calculated meniscus profile is very nonspherical with a much larger volume than that of the widely assumed spherical meniscus profile for Type I conditions, leading to an under-estimation of the meniscus force in the previous models. It is found that for a spherical or a crater contact geometry, the surface interactions have little effect on the meniscus force provided the lateral meniscus dimension is much smaller than the radius of the sphere or of the crater. However the surface interactions have a large effect on the meniscus force for other contact geometries, such as conical contact geometry. The calculated meniscus forces are compared with the normal component of the stiction force measured at the laser textured surfaces and good agreement is found. The calculated meniscus profiles are also found in good agreement with that measured using light interferometer technique between two cross cylinders. One very interesting finding of our theory is that the meniscus volume grows first and may then shrink, as observed experimentally by others, because the initially dry surface become wetted and the boundary conditions change over from Type I to Type II.

Abstract. Heterogeneous ice nucleation initiated by particles immersed within droplets is likely the main pathway of ice formation in the atmosphere. Theoretical models commonly used to describe this process assume that it mimics ice formation from the vapor, neglecting interactions unique to the liquid phase. This work introduces a new approach that accounts for such interactions by linking the ability of particles to promote ice formation to the modification of the properties of water near the particle–liquid interface. It is shown that the same mechanism that lowers the thermodynamic barrier for ice nucleation also tends to decrease the mobility of water molecules, hence the ice–liquid interfacial flux. Heterogeneous ice nucleation in the liquid phase is thus determined by the competition between thermodynamic and kinetic constraints to the formation and propagation of ice. At the limit, ice nucleation may be mediated by kinetic factors instead of the nucleation work. This new ice nucleation regime is termed spinodal ice nucleation. The comparison of predicted nucleation rates against published data suggests that some materials of atmospheric relevance may nucleate ice in this regime.

En la presente comunicación se va a abordar la aplicación práctica en casos de uso reales de la Realidad Virtual, Aumentada y otras tecnologías interactivas e inmersivas de vanguardia, tanto en el contexto de Museo 4.0 como en espacios de interés patrimonial como pueden ser yacimientos, ciudades monumentales o rutas xacobeas. Se explicará, con ejemplos reales y recientes como Xoia Extending Reality afronta las nuevas necesidades tecnológicas del Museo 4.0, con el objetivo de mejorar la interpretación, estudio, divulgación y promoción de nuestra Historia y Patrimonio mediante el empleo de las NTIC, especialmente Realidad Aumentada y Virtual, centrándose en la experiencia de usuario y en la calidad de lo divulgado. Para ello se describen casos de éxito desarrollados por Xoia en el ámbito museístico como la exposición coordinada por la Xunta de Galicia, “Galicia un relato no mundo” o la experiencia turística de Realidad Aumentada “Viaxando polo Pontedeume medieval”, desarrollada para el ayuntamiento de Pontedeume en un contexto de promoción del camino de Santiago, entre otros proyectos de puesta en valor patrimonial, cultural y turística, desarrollados con ayuntamientos, universidades y/o otras instituciones, vinculando de forma innovadora el turismo, tecnología y cultura con la finalidad de divulgar de forma novedosa y potenciando el aprendizaje, logrando llegar a un público cada vez más digital. Por último se citará ejemplos prácticos de soluciones tecnológicas aplicadas al contexto del Covid -19.