Gotowe bibliografie tematyczne / UV curing

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „UV curing”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 14 marca 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „UV curing”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "UV curing"

Li, Jia Wei, Jian Yun He, Xi Dan Luo, Chang Song Zhao, Peng Cheng Xie, Yu Mei Ding i Yu Zheng Xia. "Study on the UV Curing Reactivity of Micro-Injection UV-Curing Molding". Key Engineering Materials 777 (sierpień 2018): 65–69. http://dx.doi.org/10.4028/www.scientific.net/kem.777.65.

Pełny tekst źródła

Streszczenie:

In this paper, UV irradiation curing technology is used in the processing and manufacturing of micro structure parts and a micro-injection molding method of UV-curable molding was proposed to process microstructures. The special material for UV light curing injection of microstructural products was developed. The light curing reactivity of the micro injection light curing special material and its effect on the processing molding are studied. The kinetics of light curing reaction of UV curing injecting material were studied by online infrared spectroscopy (RT-IR). The contribution of mono functional monomers to the double bond conversion rate of microstructures is higher than that of high functional monomers. Under the same condition, the mono functional monomer can make the UV curing reaction more complete. Under the same process conditions, the rate of UV curing reaction of high functional monomers is higher than that of mono functional monomers.

Style APA, Harvard, Vancouver, ISO itp.

Shirai, Masamitsu. "Reworkable UV curing materials". Progress in Organic Coatings 58, nr 2-3 (luty 2007): 158–65. http://dx.doi.org/10.1016/j.porgcoat.2006.08.022.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Decker, Christian. "UV‐radiation curing chemistry". Pigment & Resin Technology 30, nr 5 (październik 2001): 278–86. http://dx.doi.org/10.1108/03699420110404593.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yan, Xiaoxing, Yijuan Chang i Xingyu Qian. "The Properties of an Aluminum/UV-Curable, Infrared, Low-Emissivity Coating Modified by Nano-Silica Slurry". Coatings 10, nr 4 (13.04.2020): 382. http://dx.doi.org/10.3390/coatings10040382.

Pełny tekst źródła

Streszczenie:

To improve the performances of UV-curable coatings, the effects of nano-silica slurry, aluminum and UV-curing time on the glossiness and infrared emissivity of UV-curable coatings were investigated by orthogonal experiments. The results showed that UV-curing time is a key factor affecting the performance of the coating. When the UV-curing time was increased from 30 to 360 s, the glossiness of the UV-curable coating slowly decreased from 11.1% to 9.0%. The L’ value decreased from 78.6 to 75.0. The infrared emissivity of the coating with UV-curing time of 180 s was 0.106, which was the lowest. The coating hardness with different curing time was 6H. The coating roughness was high when the UV-curing time was 30–120 s. When the UV-curing time was greater than 300 s, the coating adhesion was 0 and the coating had the best impact resistance of 500 N/cm. The overall performance of the aluminum/UV-curable coating was optimal when the UV-curing time was 180 s. This research is able to promote the industrial development of UV-curable, infrared, low-emissivity coatings.

Style APA, Harvard, Vancouver, ISO itp.

Ni, Ping Xiu, Xian Fu Wei, Pei Qing Huang i Wei Wei. "Study on the Curing Kinetics of UV-Curable Inkjet Ink". Advanced Materials Research 174 (grudzień 2010): 397–400. http://dx.doi.org/10.4028/www.scientific.net/amr.174.397.

Pełny tekst źródła

Streszczenie:

In order to make different UV curing inkjet ink system and test the relationship between the dynamic elastic modulus and UV curing time, the same monomer and pre-polymer were mixed in different proportions, and different functional monomers and pre-polymer were mixed. The results show that the larger the proportion of the pre-polymer and the greater the number of monomer functional groups, the shorter the induction period of the UV curing of UV inkjet ink system and the faster the UV curing rate. Then, the UV curing kinetics of UV inkjet inks was analyzed preliminarily.

Style APA, Harvard, Vancouver, ISO itp.

Huang, Bei Qing, Kai Yuan Luo, Xian Fu Wei, Ling Ya Gu i Mu Qun Yu. "Study on a Characterization Method of Curing Rate of UV Curing System Based on Rheokinetics". Applied Mechanics and Materials 262 (grudzień 2012): 454–59. http://dx.doi.org/10.4028/www.scientific.net/amm.262.454.

Pełny tekst źródła

Streszczenie:

Curing rate is one of the most important performance parameters of UV curing system. During the curing process, curing degree is closely related to curing rate. Cross linking and curing degree of the system could be reflected by rheological characteristics. A method based on rheokinetics was used to characterize radical polymerization reaction which initiated by UV light. Changes of G’ (dynamic modulus) in every stage of curing process were real-time monitored by a rheometer equipped with UV curing accessory. The influence of varieties and contents of photo-initiators on curing process of polyester acrylates was studied. Associating conversion rate with dynamic modulus, a nonlinear kinetic equation was set up to describe the cure reaction. The results show that, this paper has put forward a method based on rheokinetics, to study the curing rate of UV curing system, and provided a new approach to study UV cure reaction.

Style APA, Harvard, Vancouver, ISO itp.

Zhou, Rui Hua, i Xiu Yun Tian. "Irradiation System Design of Rotating Painting Ink Curing Based on UV LED". Applied Mechanics and Materials 568-570 (czerwiec 2014): 1737–42. http://dx.doi.org/10.4028/www.scientific.net/amm.568-570.1737.

Pełny tekst źródła

Streszczenie:

The effects of painting ink’s color on UV absorptivity and UV-light wavelength on curing depth in the process of rotating curing are analysed. Aiming at radial uneven curing, the scheme is proposed that using the UV LED with wavelengths of 365nm and 395nm to form a fan-shaped array on cylindrical surface. The curing system can achieve UV irradiance be enhanced gradually along the radial, and the technique problem of uneven curing is solved. The simulation result shows that the curing system meets design requirements on Tracepro.

Style APA, Harvard, Vancouver, ISO itp.

Chen, Guang Xue, Qi Feng Chen, Bao Ling Tang i Jing Lei Tai. "Study on Improvement of Photopolymerization Curing Performance of UV Ink". Applied Mechanics and Materials 182-183 (czerwiec 2012): 99–103. http://dx.doi.org/10.4028/www.scientific.net/amm.182-183.99.

Pełny tekst źródła

Streszczenie:

UV ink has many advantages such as less pollution, high curing speed, saving energy, so it has been widely applied in traditional printing and emerging digital printing. In this paper, the two curing principles in UV ink which are free-radical curing and cationic curing, are discussed and compared, and the factors that affect the curing rate are analyzed through the comparing experiment of the curing rate. In the last, the selection principle of photoinitiator is established by means of analyzing and comparing curing rate when various photoinitiator or photoinitiator combinations is used in UV-cured ink. These studies have certain significance for improving the curing efficiency of UV ink and its application.

Style APA, Harvard, Vancouver, ISO itp.

Yamaguchi, Toshiichi, Yoshihiro Yuge i Kazuhiro Murakami. "Pressurized type UV curing unit". JOURNAL OF THE ILLUMINATING ENGINEERING INSTITUTE OF JAPAN 74, Appendix (1990): 145. http://dx.doi.org/10.2150/jieij1980.74.appendix_145.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Abadie, Marc J. M., i Vanda Yu Voytekunas. "New Trends in UV Curing". Eurasian Chemico-Technological Journal 6, nr 1 (7.04.2016): 67. http://dx.doi.org/10.18321/ectj336.

Pełny tekst źródła

Streszczenie:

We present an overview of the use of photochemistry applied to polymerization and crosslinking reactions by radical or cationic process used for thin film technologies and more generally for coatings. Industrially, most of the formulations used are initiated by radical mechanism. Since the discovery by J. Crivello of iodonium and sulfonium salts, the market has been oriented to use cationic systems to crosslink monomers/oligomers. One of the main advantage of such a system is that it is not sensitive to the presence of oxygene as it is for radical mechanisms. An overview of a photosensitive formulation is presented i.e. photoinitiators, photosensitisers, monomers and/or oligomers mainly used by formulators and additives. A new technique which has been developed to study and optimise any photosensitive formulation – differential phto calorimetry DPC – and which permits to determine kinetic parameters such as enthalpy, degree of conversion, rate constant, Arrhenius parameters, etc. is also describe. Some of the main characteristics and properties of UV cured polymers like acrylates, epoxides, vinylethers and others are correlated with their structures and the photocuring conditions. Applications to thin film technologies based on acrylates, epoxides and silicones is presented. A promising area of research which opens a new route for the obtention of new structure of alternating copolymers for coatings without the use of photoinitiator and based on charge transfer complex CTC is also presented.

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "UV curing"

JANSEN, JOSE U. "Síntese e caracterização de verniz eletroisolante para cura dual UV/termica". reponame:Repositório Institucional do IPEN, 2005. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11374.

Pełny tekst źródła

Streszczenie:

Made available in DSpace on 2014-10-09T12:51:13Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T14:10:37Z (GMT). No. of bitstreams: 1 11257.pdf: 9782449 bytes, checksum: 9692d0a5b3355b0291e58320e6dc078d (MD5)
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Style APA, Harvard, Vancouver, ISO itp.

Arsu, Nergis. "Some aspects of free radical polymerisation in UV-curing". Thesis, City University London, 1993. http://openaccess.city.ac.uk/8266/.

Pełny tekst źródła

Streszczenie:

Various quinoxalines, in association with N-methyld-iethanolamine as synergist, were used to initiate the polymerisation of acrylates. It was found that the quinoxalines where used with amine synergist are efficient Type II initiators. It was also found that the cure of the acrylate is faster when oxygen is present in the reaction mixture than when it is absent. The photoinitiating efficiency of 2-Methyl-1-[4-(methylthio)phenyl]-2- morpholinopropane-1-one (IRG-907) was compared to different initiators using RTIR spectroscopy and N-Isopropylmorpholine(IPM) was used as a model to investigate the properties of the morpholino sustit.uent present in IRG-907. It was shown by RTIR spectroscopy, photocalorimetry,bulk polymerisation and the curing of thin films that 1PM acts as a physical quencher for the triplet state of IRG-907 and that it is a very poor hydrogen donor. Sensitisation of IRG-907 by lix was also investigated and it wasconfirmed that lix can sensitise the cleavage of 1RG907. Photoinduced fragmentation of aminoalcohols by quinoxalines are discussed and the reactivity of the aminoalcohols reflect their ability to undergo electron transfer and to fragment. A wide range of aminoalcohols were synthesised and used as synergist in the polymerisation of a number of acrylates using different methods and the photoyellowing and photooxidation of aminoalcohols were also investigated. Some mixed acrylate-cinnamate systems were prepared to investigate a new dual cure system. The conversion percentage was found to be very low. The lack of cure is probably due to the cinnamates are scavenging the benzoyl radicals.

Style APA, Harvard, Vancouver, ISO itp.

Mouillat, Claire G. J. "Application of UV curing to the preparation of composite materials". Thesis, University of Kent, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.360968.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Herlihy, Shaun Lawrence. "Factors influencing the efficiency of photoinitiation in radiation curable ink formations". Thesis, University of Kent, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.360974.

Pełny tekst źródła

Streszczenie:

In an effort to be able to use photoinitiators to their maximum potential, the sequence of events that occurs in an ink formulation during the UV curing process has have been studied and information presented to allow more effective formulation. Emphasis has been placed on highlighting the variables that have the greatest impact both on photoinitiator efficiency and on the suitability of individual photoinitiators and synergists for use in particular applications. These variables were found to be photoinitiator thermal stability, UV light utilisation, reaction mechanisms and cure reactivity. A wide range of photoinitiators and synergists were investigated using thermogravimetric analysis (TGA) and thermogravimetric analysis-mass spectroscopy (TGA-MS) to define both their thermal stability and whether under heating they thermally decompose or merely evaporate. Differential photocalorimetry (DPC) was used to determine which wavelengths from a typical medium pressure mercury curing lamp are the most important for providing cure, with both theoretical and practical methods being used to define the extent to which these wavelengths penetrate into pigmented and non-pigmented coatings. A procedure was devised and validated for this purpose. The reaction mechanism and photodecomposition products of a range of photoinitiators were investigated using gas chromatography-mass spectroscopy (GC-MS) and radical trapping experiments. The reaction mechanisms are discussed in terms of available literature knowledge. Evidence is also presented suggesting that, with only particular exceptions, cleavage photoinitiators can also react by a hydrogen abstraction mechanism in the presence of an amine synergist. A real time infrared spectrometer (RTIR) was set up and a method validated for following the UV curing reaction through changes in the acrylate double bond concentration. The advantages and disadvantages of this instrument are discussed in terms of other similar instruments reported in the literature, and the technique subsequently used to measure the reaction rates of a wide range of photoinitiators. Other factors such as photoinitiator concentration, amine synergist type I level and formulation viscosity were also investigated to determine their influence on the cure process.

Style APA, Harvard, Vancouver, ISO itp.

Zeng, Jianming. "Controlled structure UV curable resins for ink jet printing". Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/8714.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Torfgård, Olof. "Short wavelength UV–LED photoinitiated radical polymerization of acrylate–based coating systems—A comparison with conventional UV curing". Thesis, Uppsala universitet, Strukturkemi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-442431.

Pełny tekst źródła

Streszczenie:

The present work was performed at Sherwin–Williams Sweden group AB with the objective of comparing short-wavelength light emitting diodes (UVB/UVC) with the conventional mercury arc lamp as a curing method of acrylate-based, UV-paint undergoing free-radical polymerization when exposed to UV-radiation. Due to environmental and health risks, mercury-doped radiation sources will be phased out in the near future, according to the United Nations Minamata convention, hence new alternatives are needed. Light-emitting diodes differ from the mercury arc lamp as they provide semi-discrete output intensity lines within the UV spectrum instead of a broad output distribution with several main intensity lines. The power output is also considerably lower compared to the conventional method which limits the irradiance and dose that are key parameters in activating and propagating free-radical polymerization of UV-paint. Seven different light-emitting diodes between 260–320 nm was examinedand compared to the conventional mercury arc lamp. Cured coatings were evaluated by measuring the relative extent of acrylate conversion with ATR-FTIR and micro-hardness indentation test. Both methods correlate to the relative cross-linking density and qualitatively describe the curing process for each radiant source at a specific irradiance and dose. Three different paint formulations with widely different properties were used in the experiments. All three paints were able to cure with one or several light emitting diodes at comparable doses and 10 to 20 times lower irradiance to the conventional mercury arc lamp, resulting in similar acrylate conversion and hardness.

Style APA, Harvard, Vancouver, ISO itp.

Nebioglu, Ahmet. "NETWORK FORMATION AND THERMO-MECHANICAL PROPERTIES OF PHOTO-CURING HYBRID COATINGS". University of Akron / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=akron1145166725.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hu, Qi-Ang. "UV curable resin for ink jet printing on textile substrates". Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/8550.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bradley, Grant. "Hexaarylbisimidazoles as initiators of acrylate polymerisation : some new synthesis and application". Thesis, University of Kent, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.360967.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Baxter, J. E. "Acylphosphine oxides as photoinitiators". Thesis, City University London, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.380699.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "UV curing"

Roffey, C. G. Photogeneration of reactive species for UV curing. Chichester: Wiley, 1997.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

J, Rechel Camille, i Vara Fulvio, red. UV/EB curing primer: Inks, coatings, and adhesives. Wyd. 5. Northbrook, Ill: RadTech International North America, 1997.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

RadTech 2000 (2000 Baltimore, Md.). RadTech 2000: The premier UV/EB conference & exhibition, April 9-12, 2000, Baltimore Convention Center, Baltimore, MD : experience the world of UV/EB : technical conference : proceedings. Bethesda, MD: RadTech International North America, 2000.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Massachusetts. Dept. of Environmental Protection. Office of Technical Assistance. Conversion to UV curing reaps benefits for Fit to Print. [Boston, Mass.]: Commonwealth of Massachusetts, Executive Office of Environmental Affairs, Office of Technical Assistance, 1996.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Schwalm, Reinhold. UV coatings: Basics, recent developments and new applications. Amsterdam: Elsevier, 2007.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Clean Air Technology Center (U.S.). Ultraviolet and electron beam (UV/EB) cured coatings, inks and adhesives. Research Triangle Park, N.C: U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards, 2001.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

RadTech 2002 (2002 Indianapolis, Ind.). Curing at the speed of light: RadTech 2002, the premier UV/EB Conference & Exhibition, technical conference proceedings, April 28-May 1, 2002, Indiana Convention Center, Indianapolis, IN, U.S.A. Bethesda, MD: RadTech International North America, 2002.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

RadTech 2002 (2002 Indianapolis, Ind.). RadTech 2002: The premier UV/EB conference & exhibition, April 28-May 1, 2002, Indiana Convention Center, Indianapolis, IN, U.S.A. : curing at the speed of light : technical conference proceedings. Chevy Chase, MD: RadTech International North America, 2002.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Limited, SITA Technology, red. [Chemistry & technology of UV & EB formulations for coatings, inks, and paints]. Chichester: Wiley, 1998.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

P, Carroy, Oldring P. K. T i SITA Technology Limited, red. Speciality finishes: Chemistry & technology of UV & EB formulation for coatings, inks & paints. London: Wiley in association with SITA Technology Limited, 1997.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "UV curing"

Gooch, Jan W. "Ultraviolet Curing (Or UV Curing)". W Encyclopedic Dictionary of Polymers, 779. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_12311.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Decker, Christian. "Kinetic Analysis and Performance of UV-Curable Coatings". W Radiation Curing, 135–79. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4899-0712-7_4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Dreyer, Christian, i Franziska Mildner. "Application of LEDs for UV-Curing". W III-Nitride Ultraviolet Emitters, 415–34. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-24100-5_15.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Umezaki, Eisaku, i Masahito Abe. "Effect of UV Illumination Wavelengths on Stress and Temperature in Curing Process of UV Curing Resin". W Experimental Analysis of Nano and Engineering Materials and Structures, 657–58. Dordrecht: Springer Netherlands, 2007. http://dx.doi.org/10.1007/978-1-4020-6239-1_326.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Vitale, Alessandra, Giuseppe Trusiano i Roberta Bongiovanni. "UV-Curing of Adhesives: A Critical Review". W Progress in Adhesion and Adhesives, 101–54. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2018. http://dx.doi.org/10.1002/9781119526445.ch4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Christmas, B., R. Kemmerer i F. Kosnik. "UV/EB Curing Technology: A Short History". W High Performance Polymers: Their Origin and Development, 331–37. Dordrecht: Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-011-7073-4_32.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Bongiovanni, Roberta, Giulio Malucelli i Aldo Priola. "UV-Curing of Fluorinated Systems: Synthesis and Properties". W ACS Symposium Series, 499–510. Washington, DC: American Chemical Society, 2003. http://dx.doi.org/10.1021/bk-2003-0847.ch041.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Lu, Qi, Xianfu Wei, Ting Zhu, Beiqing Huang i Hui Wang. "Cyan Cationic-Initiated Photocurable Material with High Curing Rate for UV-LED Curing". W Lecture Notes in Electrical Engineering, 381–87. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1673-1_56.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Guo, Changlong, Peiqing Huang i Xianfu Wei. "Study on Influence of Epoxy Resin for UV Curing System". W Advanced Graphic Communications, Packaging Technology and Materials, 1011–18. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-10-0072-0_124.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Nishikubo, T., A. Kameyama i H. Kudo. "Synthesis and Photochemical Reaction of High-Performance UV-Curing Oligomers". W ACS Symposium Series, 363–77. Washington, DC: American Chemical Society, 2003. http://dx.doi.org/10.1021/bk-2003-0847.ch031.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "UV curing"

Yang, Bo. "Introduction to UV Curing Technology". W International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1996. http://dx.doi.org/10.4271/960915.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Stowe, Richard W. "High-power UV lamps for industrial UV curing applications". W SPIE's 1996 International Symposium on Optical Science, Engineering, and Instrumentation, redaktorzy Robert E. Huffman i Christos G. Stergis. SPIE, 1996. http://dx.doi.org/10.1117/12.257198.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Brehm, Markus, Christina Ertl, Isabel Pilottek i Patrick Heissler. "UV curing materials for wafer level optics". W Advanced Fabrication Technologies for Micro/Nano Optics and Photonics XIII, redaktorzy Georg von Freymann, Eva Blasco i Debashis Chanda. SPIE, 2020. http://dx.doi.org/10.1117/12.2545767.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Xie, Pengcheng, Le Chang, Le Song, Tianze Cai, Yumei Ding i Weimin Yang. "The research of UV curing injection molding". W PROCEEDINGS OF PPS-30: The 30th International Conference of the Polymer Processing Society – Conference Papers. AIP Publishing LLC, 2015. http://dx.doi.org/10.1063/1.4918480.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Hubert, Manfred, Chris F. Dimas, Paul Orava i Joyce Koo. "High-power UV LED array for curing photoadhesives". W Applications of Photonic Technology, redaktorzy Roger A. Lessard i George A. Lampropoulos. SPIE, 2003. http://dx.doi.org/10.1117/12.543342.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhang, Wenyu, Shiyong Luo, Wencai Xu i Xinlin Zhang. "The Progress of the LED-UV Curing Technology". W 2015 International Conference on Advanced Material Engineering. WORLD SCIENTIFIC, 2015. http://dx.doi.org/10.1142/9789814696029_0031.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

He, Jian-Yun, Xia Tang, Le Chang, Yu-Mei Ding, Wei-Min Yang, Peng-Cheng Xie i Xian-Chun Ye. "The Research of Microstructure UV Curing Mold Injection". W 3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015). Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/ic3me-15.2015.32.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Stowe, Richard W. "Advances in long-life industrial UV curing lamps". W SPIE's 1994 International Symposium on Optics, Imaging, and Instrumentation, redaktorzy Robert E. Huffman i Christos G. Stergis. SPIE, 1994. http://dx.doi.org/10.1117/12.186600.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Voisin, P., A. Jouve, M. Zelsmann, C. Gourgon i J. Boussey. "Template flatness issue for UV curing nanoimprint lithography". W Advanced Lithography, redaktor Michael J. Lercel. SPIE, 2007. http://dx.doi.org/10.1117/12.712032.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zeng, Fan, Beshah Ayalew i Mohammed Omar. "Control of a Robotic UV Curing Process With Thermal Vision Feedback Through Two IR Cameras". W ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-13007.

Pełny tekst źródła

Streszczenie:

Robotic ultra-violet (UV) curing is considered to be one of the effective ways to replace the current convection-based methods in various manufacturing processes due to its fast curing rate and high energy efficiency. This paper presents a closed-loop control of a robotic UV curing system by using thermal vision feedback through two infrared (IR) cameras. The proposed approach is developed based on a mathematical analysis of the fundamental UV curing process and the integration of the local and global IR cameras in a cascade manner. A computer simulation study is conducted to evaluate the proposed strategy by regarding two control variables: the radiant intensity of the UV heater and the sweeping speed of the robot end effector. The results indicate that controllers using either control variable can compensate for interferences and improve curing quality under this thermal-vision-based architecture.

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "UV curing"

Karlicek, Robert, F. ,. Jr, i Robert Sargent. High Power UV LED Industrial Curing Systems. Office of Scientific and Technical Information (OSTI), maj 2012. http://dx.doi.org/10.2172/1039941.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Voelker, Gary, i John Arnold. Utilization of UV Curing Technology to Significantly Reduce the Manufacturing Cost of LIB Electrodes. Office of Scientific and Technical Information (OSTI), listopad 2015. http://dx.doi.org/10.2172/1261838.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Okoli, Okenwa I. Development of the Resin Infusion between Double Flexible Tooling process : assessment of the viability of in-mold coating and implementation of UV curing. Office of Scientific and Technical Information (OSTI), grudzień 2004. http://dx.doi.org/10.2172/920819.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!