Gotowa bibliografia na temat „Transfert de chaleur couplé”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Transfert de chaleur couplé”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Transfert de chaleur couplé"
Oudrane, Abdellatif, Benaoumeur Aour, Messaoud Hamouda, Sofiane El Mokretar i Mohamed Benhamou. "Echanges thermiques des parois d’un environnement habitable: étude et analyse". Journal of Renewable Energies 21, nr 2 (30.06.2018): 231–45. http://dx.doi.org/10.54966/jreen.v21i2.685.
Pełny tekst źródłaBennacer, Rachid, Abdelwahab Tobbal i Hassen Beji. "Convection naturelle Thermosolutale dans une Cavité Poreuse Anisotrope: Formulation de Darcy-Brinkman". Journal of Renewable Energies 5, nr 1 (30.06.2002): 1–21. http://dx.doi.org/10.54966/jreen.v5i1.882.
Pełny tekst źródłaYoucef, Ahmed, i Rachid Saim. "Simulation numérique du comportement dynamique et thermique de deux fluides en contre courant". Journal of Renewable Energies 20, nr 1 (12.10.2023): 69–80. http://dx.doi.org/10.54966/jreen.v20i1.610.
Pełny tekst źródłaNessab, Walid, Brahim Fersadou i Henda Kahalerras. "Etude d’un jet de ferrofluide confiné en présence de deux sources magnétiques". MATEC Web of Conferences 261 (2019): 04002. http://dx.doi.org/10.1051/matecconf/201926104002.
Pełny tekst źródłaTamene, Youcef, Said Abboudi i Cherif Bougriou. "Simulation des transferts thermiques transitoires à travers un mur multicouche soumis à des conditions de flux solaire et de convection". Journal of Renewable Energies 12, nr 1 (26.10.2023): 117–24. http://dx.doi.org/10.54966/jreen.v12i1.125.
Pełny tekst źródłaFrancy, Olivier, i Raoul François. "Modélisation du transfert couplé ions chlorehumidité dans les matériaux cimentaires". Revue française de génie civil 5, nr 2-3 (28.04.2001): 377–96. http://dx.doi.org/10.3166/rfgc.5.377-396.
Pełny tekst źródłaFrancy, Olivier, i Raoul François. "Modélisation du transfert couplé ions chlore-humidité dans les matériaux cimentaires". Revue Française de Génie Civil 5, nr 2-3 (kwiecień 2001): 377–96. http://dx.doi.org/10.1080/12795119.2001.9692313.
Pełny tekst źródłaPeureux, B., J. F. Durastanti i B. Martin. "La réanalyse du transfert instationnaire de la chaleur". International Communications in Heat and Mass Transfer 24, nr 1 (styczeń 1997): 139–50. http://dx.doi.org/10.1016/s0735-1933(96)00113-3.
Pełny tekst źródłaChebbah, Lynda, Lakhdar Djemili, Mohammed Tawfik Bouziane i Mohamed Chiblak. "Modélisation d'un masque en béton bitumineux (brut et protégé) sous sollicitations thermiques en régime transitoire. cas du masque de barrage Ghrib (Ain Defla, Algérie)". La Houille Blanche, nr 1 (luty 2020): 42–49. http://dx.doi.org/10.1051/lhb/2019064.
Pełny tekst źródłaFortin, G., P. R. Louchez i F. H. Samuel. "Transfert de chaleur en solidification radiale de l’aluminium pur". Revue de Métallurgie 91, nr 5 (maj 1994): 771–80. http://dx.doi.org/10.1051/metal/199491050771.
Pełny tekst źródłaRozprawy doktorskie na temat "Transfert de chaleur couplé"
Bougeard, Daniel. "Etude expérimentale du transfert thermique couplé au sein de géométries complexes : application aux échangeurs de chaleur". Valenciennes, 1997. https://ged.uphf.fr/nuxeo/site/esupversions/32ad393b-fdf6-43c3-803f-5411e53c570f.
Pełny tekst źródłaOulaid, Othmane. "TRANSFERT COUPLÉ DE CHALEUR ET DE MASSE PAR CONVECTION MIXTE AVEC CHANGEMENT DE PHASE DANS UN CANAL". Phd thesis, Université de Sherbrooke, 2010. http://tel.archives-ouvertes.fr/tel-00669024.
Pełny tekst źródłaLazard, Myriam. "Modélisation macroscopique du transfert de chaleur transitoire couplé conduction rayonnement dans un milieu semi-transparent : estimation de paramètres". Vandoeuvre-les-Nancy, INPL, 2000. http://www.theses.fr/2000INPL030N.
Pełny tekst źródłaWu, Jing. "Modélisation dynamique d’un système couplé pompe à chaleur – stockage thermique par matériaux à changement de phase : approche systémique et validation expérimentale". Thesis, Lyon 1, 2015. http://www.theses.fr/2015LYO10167/document.
Pełny tekst źródłaIn the area of buildings refrigeration, the use of thermal energy storage coupled with heat pump is a significant way for reducing the operating costs and optimizing the design of equipment. A prototype of refrigeration-PCM (Phase Change Material) energy storage system is built and implemented within the framework of the project ACLIRSYS (Advanced Control for Low Inertia Refrigeration Systems), funded by the French National Research Agency. The objective of my PhD thesis is to propose a dynamical physical model for the complete system. Within the evaporator and condenser of the heat pump, the refrigerant can be liquid, vapor or mixture of both, while the storage media can be solid, liquid or a mixture of both. Therefore, it is necessary to consider the discrete events associated to phase changes in order to solve the energy and mass balances in different configurations. In this work, static models are used for the compressor and the expansion valve of the heat pump. The heat exchangers of the heat pump and the storage models are based on a representation of the fluid flows by a cascade of Continuous Stirred Tank Reactors (CSTRs). In order to assure the continuity of system evolution, the switching mechanism between different configurations is established. This switching is performed by matrix operations, which permit to achieve a global and very compact representation of the system. The thermodynamic properties of the refrigerant and their partial derivatives are analytically determined by using an equation of state. Two versions of the model for the storage are proposed. A simplified version where the supercooling is assumed to take place at a constant temperature and a more detailed version based on the population balance equations. Experimental data from the prototype has been used to validate the developed model. Experiments in transient states were performed by varying the operating conditions. These date relate to the functioning of the heat pump alone, the storage alone and the coupled system. A very good agreement between the numerical results and experimental data was obtained
Draoui, Abdeslam. "Etudes numériques des transferts de chaleur couples rayonnement-conduction et rayonnement-convection dans un milieu semi-transparent bidimensionnel". Lyon, INSA, 1989. http://www.theses.fr/1989ISAL0012.
Pełny tekst źródłaThe works we present here are a numerical approach of heat transfer coupling radiation-conduction and radiation-convection within semi-transparent two-dimensional medium ; The first part deals with a view of equation of radiative transfer and introduces three numerical methods (P1, P2, Hottel's zone) which enable one to solve this problem in a two dimensional environment. After comparing the three methods in the case where radiation is the only mode of transfer, we introduce in the second chapter a study of the coupling of radiation with conduction. So, a fourth method is used to solve the problem. These comparisons lead us to various methods which enable us to show the interest of the spherical harmonics approximations. In the third part, the P1 approximations is kept because it is simple to use, moreover it enables us to introduce both the coupling of radiative transfers with laminar convective equations in a thermally driven two-dimensional cavity. The results show a significant influence of the radiative participation of the fluid on heat and dynamic transfer we met in this type of problem
Flores, Carolina. "Etude des transferts de masse et de chaleur au sein d'un absorbeur eau/bromure de lithium". Phd thesis, Université de Grenoble, 2014. http://tel.archives-ouvertes.fr/tel-01062936.
Pełny tekst źródłaRamousse, Julien. "Transferts couplés masse-charge-chaleur dans une cellule de pile à combustible à membrane polymère". Vandoeuvre-les-Nancy, INPL, 2005. http://www.theses.fr/2005INPL098N.
Pełny tekst źródłaUnderstanding and modelling of coupled mass, charges and heat transfers phenomena are fundamental to analyse the electrical behaviour of the system. The aim of the present model is to describe electrical performances of a PEFMC according to the fluidic and thermal operating conditions. The water content of the membrane and the water distribution in the single cell are estimated according to the coupled simulations of mass transport in the thickness of the single cell and in the feeding channels of the bipolar plates. A microscopic model of a Gas Diffusion Electrode is built up to describe charges transfer phenomena occurring at the electrodes. Completed by a study of heat transfer in the Membrane Electrode Assembly, conditions and preferential sites of water vapour condensation can be highlighted. A set of measurements of the effective thermal conductivity of carbon felts used in fuel cells as porous backing layers have also been performed. Although the value of this parameter is essential for the study of heat transfer, it is still under investigation because of the strong thermal anisotropy of the medium
Chehbouni, Abdelghani. "Présentation d'un modèle de transfert couplé de masse et de chaleur dans le système sol-végétation-atmosphère pour les zones arides et semi-arides". Toulouse 3, 1992. http://www.theses.fr/1992TOU30083.
Pełny tekst źródłaDelarochelambert, Thierry. "Etude expérimentale et théorique des transferts thermiques couples en convection naturelle à travers une double paroi verticale à haute densité de flux de chaleur". Mulhouse, 1997. http://www.theses.fr/1997MULH0506.
Pełny tekst źródłaAklouche, Leila. "Modélisation des transferts couplés masse-chaleur dans un matériau amylacé lors des hydrotraitements par haute pression : caractérisations physicochimiques et thermophysiques". Thesis, La Rochelle, 2019. http://www.theses.fr/2019LAROS025.
Pełny tekst źródłaThis thesis aims on the one hand to understand the physical changes generated in the internal structure of a biopolymer material submitted to high-pressure hydrotreatments and on the other hand to the modelling of coupled heat and mass transfers. In this work, standard maize starch was chosen as a model material and four processes were investigated; DV-HMT (Direct Vapor-Heat Moisture Treatment), RP-HMT (Reduced Pressurized-HMT), IV-HMT (Intensive Vacuum-HMT) et FV-HMT (Final Vacuum-HMT). As the progression of biochemical reactions is strongly affected by the temperature and water content that alter the physical and thermophysical properties of the reactive material, their prediction is very important. The analysis of phase transitions and structure, related to the involved phenomena (cristallites fusion, formation of amylose-lipids complexes, retrogradation) was performed by calorimetry, X-ray diffraction and by FTIR spectroscopy. The transfers modelling has been advanced by an experimental and theoretical approaches. In the experimental approach, the physical (apparent density, bulk density and porosity) and thermophysical properties (specific heat, conductivity ant thermal diffusivity) were measured by considering the variation of W, T and the crystallites fusion phenomenon. Empirical models expressing these properties have been determined and the values implemented in the transfer equations. In the theoretical approach, the coupled equations of the transfer model were discretised by the finite element method and resolved by COMSOL Multiphysics®. The numerical resolution allowed the prediction of the spatial repartition of variable parameters (T, W, ξ, λ, Cp,...) according to treatment time. The curves of ξ numerically simulated by COMSOL® go through all experimental values, thus validating the theoretical models
Książki na temat "Transfert de chaleur couplé"
Giot, M. Phénomènes de transfert: Fluides, chaleur, masse. Wyd. 2. Louvain-la-Neuve: CIACO, 1989.
Znajdź pełny tekst źródłaDunn, P. D. Heat pipes. Wyd. 4. Oxford, England: Pergamon, 1994.
Znajdź pełny tekst źródłaIncropera, Frank P. Fundamentals of heat and mass transfer. Wyd. 3. Chichester: Wiley, 1990.
Znajdź pełny tekst źródłaMills, Anthony. Heat and Mass Transfer. London: Taylor and Francis, 2017.
Znajdź pełny tekst źródłaIncropera, Frank P. Fundamentals of heat and mass transfer.: Frank P. Incropera ... [et al.]. Wyd. 6. Hoboken, N.J: Wiley, 2006.
Znajdź pełny tekst źródłaIncropera, Frank P. Fundamentals of heat and mass transfer. Wyd. 4. New York: Wiley, 1996.
Znajdź pełny tekst źródłaIncropera, Frank P. Fundamentals of heat and mass transfer. Wyd. 3. New York: Wiley, 1990.
Znajdź pełny tekst źródłaIncropera, Frank P. Fundamentals of heat and mass transfer. Wyd. 2. Chichester: Wiley, 1985.
Znajdź pełny tekst źródłaP, Cheremisinoff Nicholas, red. Handbook of heat and mass transfer. Houston: Gulf Pub. Co., 1986.
Znajdź pełny tekst źródłaIncropera, Frank P. Fundamentals of heat and mass transfer. Wyd. 2. New York: Wiley, 1985.
Znajdź pełny tekst źródłaCzęści książek na temat "Transfert de chaleur couplé"
OLIVÈS, Régis. "Centrales solaires thermodynamiques et stockage". W Stockage de la chaleur et du froid 1, 217–87. ISTE Group, 2023. http://dx.doi.org/10.51926/iste.9133.ch8.
Pełny tekst źródłaDassargues, Alain. "11. Transfert de chaleur dans les aquifères et géothermie peu profonde". W Hydrogéologie appliquée, 341–64. Dunod, 2020. http://dx.doi.org/10.3917/dunod.dassa.2020.01.0341.
Pełny tekst źródłaBergevin, Benoit, i Benoit Jean. "ETUDE DES MECANISMES DE TRANSFERT DE LA CHALEUR DANS UN SYSTEME DE CHAUFFE-EAU SOLAIRE A CHANGEMENT DE PHASE". W Intersol Eighty Five, 369–73. Elsevier, 1986. http://dx.doi.org/10.1016/b978-0-08-033177-5.50078-8.
Pełny tekst źródłaStreszczenia konferencji na temat "Transfert de chaleur couplé"
Anzalone, R., B. W. Barr, R. R. Upadhyay i O. A. Ezekoye. "Use of a Quasi-Steady Ablation Model for Design Sensitivity With Uncertainty Propagation". W ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63677.
Pełny tekst źródła