Artykuły w czasopismach: „Timing jitter”

1

Chin, J., i A. Cantoni. "Phase jitter/spl equiv/timing jitter?" IEEE Communications Letters 2, nr 2 (luty 1998): 54–56. http://dx.doi.org/10.1109/4234.660802.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Horiuchi, Noriaki. "Ultralow timing jitter". Nature Photonics 6, nr 2 (luty 2012): 71. http://dx.doi.org/10.1038/nphoton.2012.17.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Wang, Jiaqi, i Ping Qiu. "Photodetection-induced relative timing jitter in synchronized time-lens source for coherent Raman scattering microscopy". Journal of Innovative Optical Health Sciences 10, nr 05 (wrzesień 2017): 1743003. http://dx.doi.org/10.1142/s1793545817430039.

Pełny tekst źródła

Streszczenie:

Synchronized time-lens source is a novel method to generate synchronized optical pulses to mode-locked lasers, and has found widespread applications in coherent Raman scattering microscopy. Relative timing jitter between the mode-locked laser and the synchronized time-lens source is a key parameter for evaluating the synchronization performance of such synchronized laser systems. However, the origins of the relative timing jitter in such systems are not fully determined, which in turn prevents the experimental efforts to optimize the synchronization performance. Here, we demonstrate, through theoretical modeling and numerical simulation, that the photodetection could be one physical origin of the relative timing jitter. Comparison with relative timing jitter due to the intrinsic timing jitter of the mode-locked laser is also demonstrated, revealing different qualitative and quantitative behaviors. Based on the nature of this photodetection-induced timing jitter, we further propose several strategies to reduce the relative timing jitter. Our theoretical results will provide guidelines for optimizing synchronization performance in experiments.

Style APA, Harvard, Vancouver, ISO itp.

4

Feng, Jia Mei, Yuan Cheng Yao i Ming Wei Qin. "An Improved Timing Recovery Algorithm Design". Applied Mechanics and Materials 130-134 (październik 2011): 2997–3000. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.2997.

Pełny tekst źródła

Streszczenie:

Timing-jitter is an important index of timing recovery algorithm. This paper describes impact-factors of timing-jitter in an AWGN channel and discovers that input noise have great influence on it, proposed an improved timing recovery method for adding a loop gain to reduce it. Simulations demonstrate that a timing recovery with loop gain can have performance superior to that of without it, and got the conclusion that add loop gain at the range of 0.1 to 0.3 both timing jitter and timing recovery points can reach minimum values. Better yet, when choose a loop gain at 0.1, timing jitter decrease from ±0.2 to ±0.08, and system’s error rates also have obverse decrease.

Style APA, Harvard, Vancouver, ISO itp.

5

Miyauchi, Kazuhiro, Isamu Wakabayashi i Hiroki Shibayama. "Analysis of timing jitter in digital transmission systems". Electronics and Communications in Japan (Part I: Communications) 84, nr 8 (10.04.2001): 1–13. http://dx.doi.org/10.1002/ecja.1027.

Pełny tekst źródła

Streszczenie:

AbstractAn analysis of timing jitter generation in band‐limited digital systems is presented. An integral representation of jitter spectral density in frequency domain is derived for typical transmission systems: baseband polar system, BPSK and QPSK with AWGN. Using the representation, one can calculate the jitter spectral density and jitter variance for any frequency characteristics of the channel by performing integration over a finite frequency domain. The jitter spectral density consists of three terms with different noise dependency, each of which is represented by a combination of three factors: a coefficient, tank function, and jitter source spectral density. As a typical application of the present theory, the jitter spectral density and rms jitter are calculated for a cosine rolloff scheme. The jitter dependency on the rolloff factor, Eb/N0, and timing tank parameters are calculated and discussed. © 2001 Scripta Technica, Electron Comm Jpn Pt 1, 84(8): 1–13, 2001

Style APA, Harvard, Vancouver, ISO itp.

6

Shi, Cheng, Zhi-Kang Ni, Jun Pan, Zhijie Zheng, Shengbo Ye i Guangyou Fang. "A Method for Reducing Timing Jitter’s Impact in Through-Wall Human Detection by Ultra-Wideband Impulse Radar". Remote Sensing 13, nr 18 (8.09.2021): 3577. http://dx.doi.org/10.3390/rs13183577.

Pełny tekst źródła

Streszczenie:

Ultra-wideband (UWB) impulse radar is widely used for through-wall human respiration detection due to its high range resolution and high penetration capability. UWB impulse radar emits very narrow time pulses, which can directly obtain the impulse response of the target. However, the time interval between successive pulses emitted is not ideally fixed because of timing jitter. This results in the impulse response position of the same target not being fixed, but it is related to slow-time. The clutter scattered by the stationary target becomes non-stationary clutter, which affects the accurate extraction of the human respiration signal. In this paper, we propose a method for reducing timing jitter’s impact in through-wall human detection by UWB impulse radar. After the received signal is processed by the Fast Fourier transform (FFT) in slow-time, we model the range-frequency matrix in the frequency domain as a superposition of the low-rank representation of jitter-induced clutter data and the sparse representation of human respiratory data. By only extracting the sparse component, the impact of timing jitter in human respiration detection can be reduced. Both numerical simulated data and experimental data demonstrate that our proposed method can effectively remove non-stationary clutter induced by timing jitter and improve the accuracy of the human target signal extraction.

Style APA, Harvard, Vancouver, ISO itp.

7

Taylor, Gregor G., Ewan N. MacKenzie, Boris Korzh, Dmitry V. Morozov, Bruce Bumble, Andrew D. Beyer, Jason P. Allmaras, Matthew D. Shaw i Robert H. Hadfield. "Mid-infrared timing jitter of superconducting nanowire single-photon detectors". Applied Physics Letters 121, nr 21 (21.11.2022): 214001. http://dx.doi.org/10.1063/5.0128129.

Pełny tekst źródła

Streszczenie:

Detector timing jitter is a key parameter in advanced photon counting applications. Superconducting nanowire single-photon detectors offer the fastest timing jitter in the visible to telecom wavelength range and have demonstrated single-photon sensitivity in the mid-infrared spectral region. Here, we report on timing jitter in a NbTiN nanowire device from 1.56 to 3.5 μm wavelength, achieving a FWHM jitter from 13.2 to 30.3 ps. This study has implications for emerging time-correlated single-photon counting applications in the mid-infrared spectral region.

Style APA, Harvard, Vancouver, ISO itp.

8

Xu, Hao, Haitao Wu, Dong Hou, Haoyuan Lu, Zhaolong Li i Jianye Zhao. "Yoctosecond Timing Jitter Sensitivity in Tightly Synchronized Mode-Locked Ti:Sapphire Lasers". Photonics 9, nr 8 (12.08.2022): 569. http://dx.doi.org/10.3390/photonics9080569.

Pełny tekst źródła

Streszczenie:

Higher sensitivity in timing jitter measurement has great importance in studies related to precise measurements. Timing jitter noise floors contribute one of the main parts in existing measurements. In this article, a phase error signal is obtained by superposition of outputs of two optical heterodyne discrimination apparatus to suppress the noise floor. Excess phase noise of the electrical amplifier is avoided. We demonstrate 2.6 × 10−14 fs2/Hz (~160 ys/√Hz) timing jitter noise floor between two identical 99 MHz repetition-rate mode-locked Ti:sapphire lasers after their repetition rates are tightly synchronized. The performance is extensible to reach an integrated timing jitter resolution of one attosecond.

Style APA, Harvard, Vancouver, ISO itp.

9

Zhou, Gengji, Ming Xin, Franz X. Kaertner i Guoqing Chang. "Timing jitter of Raman solitons". Optics Letters 40, nr 21 (30.10.2015): 5105. http://dx.doi.org/10.1364/ol.40.005105.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Citrin, D. S. "Fibonacci signals with timing jitter". Mathematics in Engineering 5, nr 4 (2023): 1–13. http://dx.doi.org/10.3934/mine.2023076.

Pełny tekst źródła

Streszczenie:

<abstract><p>The power spectral density of a signal comprised of a sequence of Dirac $ \delta $-functions at successive times determined by a Fibonacci sequence is the temporal analog of the well known structure factor for a Fibonacci chain. Such a signal is quasi-periodic and, under suitable choice of parameters, is the temporal analog of a one-dimensional quasicrystal. While the effects of disorder in the spatial case of Fibonacci chains has been studied numerically, having an analytically tractable stochastic model is needed both for the spatial and temporal cases to be able to study these effects as model parameters are varied. Here, we consider the effects of errors in where the $ \delta $-functions defining the signal in the temporal case occur, i.e., timing jitter. In this work, we present an analytically tractable theory of how timing jitter affects the power spectral density of Fibonacci signals.</p></abstract>

Style APA, Harvard, Vancouver, ISO itp.

11

Xu-Friedman, Matthew A., i Wade G. Regehr. "Dynamic-Clamp Analysis of the Effects of Convergence on Spike Timing. I. Many Synaptic Inputs". Journal of Neurophysiology 94, nr 4 (październik 2005): 2512–25. http://dx.doi.org/10.1152/jn.01307.2004.

Pełny tekst źródła

Streszczenie:

Precise action potential timing is crucial in sensory acuity and motor control. Convergence of many synaptic inputs is thought to provide a means of decreasing spike-timing variability (“jitter”), but its effectiveness has never been tested in real neurons. We used the dynamic-clamp technique in mouse auditory brain stem slices to examine how convergence controls spike timing. We tested the roles of several synaptic properties that are influenced by ongoing activity in vivo: the number of active inputs ( N), their total synaptic conductance ( Gtot), and their timing, which can resemble an alpha or a Gaussian distribution. Jitter was reduced most with large N, up to a factor of over 20. Variability in N is likely to occur in vivo, but this added little jitter. Jitter reduction also depended on the timing of inputs: alpha-distributed inputs were more effective than Gaussian-distributed inputs. Furthermore, the two distributions differed in their sensitivity to synaptic conductance: for Gaussian-distributed inputs, jitter was most reduced when Gtot was 2–3 times threshold, whereas alpha-distributed inputs showed continued jitter reduction with higher Gtot. However, very high Gtot caused the postsynaptic cell to fire multiple times, particularly when the input jitter outlasted the cell's refractory period, which interfered with jitter reduction. Gtot also greatly affected the response latency, which could influence downstream computations. Changes in Gtot are likely to arise in vivo through activity-dependent changes in synaptic strength. High rates of postsynaptic activity increased the number of synaptic inputs required to evoke a postsynaptic response. Despite this, jitter was still effectively reduced, particularly in cases when this increased threshold eliminated secondary spikes. Thus these studies provide insight into how specific features of converging inputs control spike timing.

Style APA, Harvard, Vancouver, ISO itp.

12

Sun, Hua Fang, Xin Ning Liu i Xin Chen. "Optimum Digital Filter for High-Performance All-Digital Phase-Locked Loop". Applied Mechanics and Materials 182-183 (czerwiec 2012): 587–92. http://dx.doi.org/10.4028/www.scientific.net/amm.182-183.587.

Pełny tekst źródła

Streszczenie:

The effect of all-digital phase-locked loop (ADPLL) digital filter parameters on the jitter is investigated in time domain, and a systematic design procedure for ADPLL is presented. The pro-posed method not only estimates the output jitter of an ADPLL, but also finds the optimal filter pa-rameter minimizing the overall ADPLL timing jitter. To verify the theoretic analysis, an ADPLL behavior model in matlab is designed. The simulation shows significant performance improvement on the timing jitter.

Style APA, Harvard, Vancouver, ISO itp.

13

Wang, S. Q., N. Wang, J. B. Wang, G. Hobbs, H. Xu, B. J. Wang, S. Dai i in. "Pulse Jitter and Single-pulse Variability in Millisecond Pulsars". Astrophysical Journal 964, nr 1 (1.03.2024): 6. http://dx.doi.org/10.3847/1538-4357/ad217b.

Pełny tekst źródła

Streszczenie:

Abstract Understanding the jitter noise resulting from single-pulse phase and shape variations is important for the detection of gravitational waves using pulsar timing arrays. We present measurements of the jitter noise and single-pulse variability of 12 millisecond pulsars that are part of the International Pulsar Timing Array sample using the Five-hundred-meter Aperture Spherical radio Telescope. We find that the levels of jitter noise can vary dramatically among pulsars. A moderate correlation with a correlation coefficient of 0.57 between jitter noise and pulse width is detected. To mitigate jitter noise, we perform matrix template matching using all four Stokes parameters. Our results reveal a reduction in jitter noise ranging from 6.7% to 39.6%. By performing longitude-resolved fluctuation spectrum analysis, we identify periodic intensity modulations in 10 pulsars. In PSR J0030+0451, we detect single pulses with energies more than 10 times the average pulse energy, suggesting the presence of giant pulses. We also observe a periodic mode-changing phenomenon in PSR J0030+0451. We examine the achievable timing precision by selecting a subset of pulses with a specific range of peak intensity, but no significant improvement in timing precision is achievable.

Style APA, Harvard, Vancouver, ISO itp.

14

Sugahara, Hiroto, Yasumichi Nonaka, Akihiro Maruta i Yuji Kodama. "Analysis of timing jitter for a wavelength‐division‐multiplexed dispersion‐managed optical soliton transmission system". Electronics and Communications in Japan (Part I: Communications) 84, nr 10 (18.04.2001): 10–15. http://dx.doi.org/10.1002/ecja.1043.

Pełny tekst źródła

Streszczenie:

AbstractIn a wavelength‐division‐multiplexed optical soliton transmission system, collisions of solitons between different channels induce frequency shifts and time shifts of the signal which result in undesirable timing jitter. The residual frequency shift after collision can be reduced by managing the dispersion value periodically along the line. In this paper, we theoretically show a mechanism of the collision‐induced frequency shift and time shift for a dispersion‐managed line. We also analyze the collision‐induced timing jitter and Gordon–Haus jitter simultaneously and propose an optimal path averaged dispersion of the line with respect to minimum timing jitter. © 2001 Scripta Technica, Electron Comm Jpn Pt 1, 84(10): 10–15, 2001

Style APA, Harvard, Vancouver, ISO itp.

15

WANG, WENQIN. "CLOCK TIMING JITTER ANALYSIS AND COMPENSATION FOR BISTATIC SYNTHETIC APERTURE RADAR SYSTEMS". Fluctuation and Noise Letters 07, nr 03 (wrzesień 2007): L341—L350. http://dx.doi.org/10.1142/s0219477507003982.

Pełny tekst źródła

Streszczenie:

Bistatic synthetic aperture radar (SAR) operates with distinct transmit and receive antennas that are mounted on separate platforms. Such a spatial separation has several operational advantages, which will increase the capability, reliability and flexibility of future SAR missions. However, this configuration results that there is no cancelation of low frequency oscillator noise as in the monostatic cases. As a consequence, high accurate time synchronization or clock timing jitter compensation must be provided. Literature search reveals little time synchronization work for bistatic SAR has been reported. As such, the use of a new range alignment algorithm to quantify and compensate clock timing jitter is proposed. The impact of clock timing jitter on bistatic SAR is analyzed, and the performance of the proposed algorithm is evaluated. Simulation results show that successful clock timing jitter compensation for bistatic SAR is achieved by using the proposed algorithm.

Style APA, Harvard, Vancouver, ISO itp.

16

She, Lei, Yanshen Fang, Liang Hu, Rui Su i Xin Fu. "Timing jitter of monodisperse droplets generated by capillary jet breakup". Physics of Fluids 34, nr 4 (kwiecień 2022): 042107. http://dx.doi.org/10.1063/5.0084151.

Pełny tekst źródła

Streszczenie:

Uniform droplets generated by Rayleigh breakup of liquid jet are widely applied in science and engineering. The droplets are produced by imposing a periodic velocity perturbation on a micro-sized liquid jet. In practical situations, the frequency of droplet generation is not perfectly steady like the preset perturbation frequency. This unwanted timing jitter poses kinds of problems. We studied the fluid mechanism of the jitter at short working distance and its dependence on various parameters. We found that at short distance, the jitter is mainly affected by the reduction rather than the dispersion in the droplet velocity. The magnitude of the jitter is related to the velocity reduction and the unsteadiness of the perturbation. The velocity difference between the droplet and the jet is analytically obtained based on one-dimensional linear analysis of drop formation in liquid jet, and numerical simulations validate the results. The influence of the unsteady perturbation is explained by the evolution of control volumes with different initial amplitudes. The degree of jitter is finally deduced, and its relationships with each variable are compared with experiments. Optimization methods are given to mitigate jitter by adjusting the perturbation parameters and jet properties.

Style APA, Harvard, Vancouver, ISO itp.

17

Xu-Friedman, Matthew A., i Wade G. Regehr. "Dynamic-Clamp Analysis of the Effects of Convergence on Spike Timing. II. Few Synaptic Inputs". Journal of Neurophysiology 94, nr 4 (październik 2005): 2526–34. http://dx.doi.org/10.1152/jn.01308.2004.

Pełny tekst źródła

Streszczenie:

Sensory pathways in the nervous system possess mechanisms for decreasing spike-timing variability (“jitter”), probably to increase acuity. Most studies of jitter reduction have focused on convergence of many subthreshold inputs. However, many neurons receive only a few active inputs at any given time, and jitter reduction under these conditions is not well understood. We examined this issue using dynamic-clamp recordings in slices from mouse auditory brain stem. Significant jitter reduction was possible with as few as two inputs, provided the inputs had several features. First, jitter reduction was greatest and most reliable for supra-threshold inputs. Second, significant jitter reduction occurred when the distribution of input times had a rapid onset, i.e., for alpha- but not for Gaussian-distributed inputs. Third, jitter reduction was compromised unless late inputs were suppressed by the refractory period of the cell. These results contrast with the finding in the previous paper in which many subthreshold inputs contribute to jitter reduction, whether alpha- or Gaussian-distributed. In addition, convergence of many subthreshold inputs could fail to elicit any postsynaptic response when the input distribution outlasted the refractory period of the cell. These significant differences indicate that each means of reducing jitter has advantages and disadvantages and may be more effective for different neurons depending on the properties of their inputs.

Style APA, Harvard, Vancouver, ISO itp.

18

DiCaprio, Ralph A., Cyrus P. Billimoria i Björn Ch Ludwar. "Information Rate and Spike-Timing Precision of Proprioceptive Afferents". Journal of Neurophysiology 98, nr 3 (wrzesień 2007): 1706–17. http://dx.doi.org/10.1152/jn.00176.2007.

Pełny tekst źródła

Streszczenie:

Proprioception in the first two joints of crustacean limbs is mediated by chordotonal organs that utilize spike-mediated information coding and transmission and by nonspiking proprioceptive afferents that use graded transmission at information rates in excess of 2,500 bits/s. Chordotonal organs operate in parallel with the graded receptors, but the information rates of the spiking chordotonal afferents have not been previously determined. Lower-bound estimates of chordotonal afferent information rates were calculated using stimulus reconstruction, which assumes linear encoding of the stimulus. The information rate was also directly estimated from the spike train entropy, which makes no a priori assumptions with respect to the coding scheme used by the system. Lower-bound information rate estimates ranged from 43 to 69 bits/s, whereas the direct estimates ranged from 24 to 278 bits/s. Comparison of both estimates derived from the same data set indicates that a linear decoder could recover an average of 59% of the information from the spike train. Afferent spike timing was found to be extremely precise, with spikes evoked with an average timing jitter of 0.55 ms. Information rate was correlated with the mean jitter and the noise entropy of the spike train could be predicted from the mean firing rate and mean jitter. Direct stimulation of single afferents by current injection into the soma revealed that the average timing jitter was <0.1 ms, indicating that intrinsic membrane properties, spike generation, and mechanotransduction mechanisms are the major sources of timing jitter in this system.

Style APA, Harvard, Vancouver, ISO itp.

19

Mollenauer, L. F., i J. P. Gordon. "Birefringence-mediated timing jitter in soliton transmission". Optics Letters 19, nr 6 (15.03.1994): 375. http://dx.doi.org/10.1364/ol.19.000375.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Jiang, Leaf A., Matthew E. Grein, Hermann A. Haus, Erich P. Ippen i Hiroyuki Yokoyama. "Timing jitter eater for optical pulse trains". Optics Letters 28, nr 2 (15.01.2003): 78. http://dx.doi.org/10.1364/ol.28.000078.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Tsuchida, Hidemi. "Pulse timing-jitter reduction by incoherent addition". Optics Letters 28, nr 6 (15.03.2003): 474. http://dx.doi.org/10.1364/ol.28.000474.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Zhen, Huang, Yang Pan i Zhang Wei Han. "Improved Gardner Suppression Timing Jitter Synchronization Algorithm". Journal of Electrical and Electronic Engineering 8, nr 1 (2020): 21. http://dx.doi.org/10.11648/j.jeee.20200801.14.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Ho, Keang-Po, Alan Pak Tao Lau i William Shieh. "Equalization-enhanced phase noise induced timing jitter". Optics Letters 36, nr 4 (15.02.2011): 585. http://dx.doi.org/10.1364/ol.36.000585.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Jiang, L. A., S. T. Wong, M. E. Grein, E. P. Ippen i H. A. Haus. "Measuring timing jitter with optical cross correlations". IEEE Journal of Quantum Electronics 38, nr 8 (sierpień 2002): 1047–52. http://dx.doi.org/10.1109/jqe.2002.800993.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Ortlepp, T., i F. H. Uhlmann. "Technology Related Timing Jitter in Superconducting Electronics". IEEE Transactions on Applied Superconductivity 17, nr 2 (czerwiec 2007): 534–37. http://dx.doi.org/10.1109/tasc.2007.901334.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Ho, Keang-Po. "Optimal detection of solitons with timing jitter". Journal of the Optical Society of America B 22, nr 10 (1.10.2005): 2164. http://dx.doi.org/10.1364/josab.22.002164.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Chen, J., T. Lv, Y. Chen i J. Lv. "A Timing-Jitter Robust UWB Modulation Scheme". IEEE Signal Processing Letters 13, nr 10 (październik 2006): 593–96. http://dx.doi.org/10.1109/lsp.2006.876322.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Wu, Wen, Xiao Shan, Yaoqiang Long, Jing Ma, Kun Huang, Ming Yan, Yan Liang i Heping Zeng. "Free-Running Single-Photon Detection via GHz Gated InGaAs/InP APD for High Time Resolution and Count Rate up to 500 Mcount/s". Micromachines 14, nr 2 (12.02.2023): 437. http://dx.doi.org/10.3390/mi14020437.

Pełny tekst źródła

Streszczenie:

Free-running InGaAs/InP single-photon avalanche photodiodes (SPADs) typically operate in the active-quenching mode, facing the problems of long dead time and large timing jitter. In this paper, we demonstrate a 1-GHz gated InGaAs/InP SPAD with the sinusoidal gating signals asynchronous to the incident pulsed laser, enabling free-running single-photon detection. The photon-induced avalanche signals are quenched within 1 ns, efficiently reducing the SPAD’s dead time and achieving a count rate of up to 500 Mcount/s. However, the timing jitter is measured to be ~168 ps, much larger than that of the SPAD with synchronous gates. We adjust the delay between the gating signals and the incident pulsed laser to simulate the random arrival of the photons, and record the timing jitter, respectively, to figure out the cause of the jitter deterioration. In addition, the effects of the incident laser power and working temperature of the APD on the time resolution have been investigated, broadening the applications of the GHz gated free-running SPAD in laser ranging and imaging, fluorescence spectroscopy detection and optical time-domain reflectometry.

Style APA, Harvard, Vancouver, ISO itp.

29

Kang, Heung-Sik, Haeryong Yang, Gyujin Kim, Hoon Heo, Inhyuk Nam, Chang-Ki Min, Changbum Kim i in. "FEL performance achieved at PAL-XFEL using a three-chicane bunch compression scheme". Journal of Synchrotron Radiation 26, nr 4 (19.06.2019): 1127–38. http://dx.doi.org/10.1107/s1600577519005861.

Pełny tekst źródła

Streszczenie:

PAL-XFEL utilizes a three-chicane bunch compression (3-BC) scheme (the very first of its kind in operation) for free-electron laser (FEL) operation. The addition of a third bunch compressor allows for more effective mitigation of coherent synchrotron radiation during bunch compression and an increased flexibility of system configuration. Start-to-end simulations of the effects of radiofrequency jitter on the electron beam performance show that using the 3-BC scheme leads to better performance compared with the two-chicane bunch compression scheme. Together with the high performance of the linac radiofrequency system, it enables reliable operation of PAL-XFEL with unprecedented stability in terms of arrival timing, pointing and intensity; an arrival timing jitter of better than 15 fs, a transverse position jitter of smaller than 10% of the photon beam size, and an FEL intensity jitter of smaller than 5% are consistently achieved.

Style APA, Harvard, Vancouver, ISO itp.

30

Liu, Keyang, Hongyang Li, Xinliang Wang, Yanqi Liu, Liwei Song i Yuxin Leng. "Timing Fluctuation Correction of A Femtosecond Regenerative Amplifier". Crystals 11, nr 10 (14.10.2021): 1242. http://dx.doi.org/10.3390/cryst11101242.

Pełny tekst źródła

Streszczenie:

We report on the long-term correction of a timing fluctuation between the femtosecond regenerative amplifier and the reference oscillator for the seed 100 PW laser system in the Station of Extreme Light (SEL). The timing fluctuation was characterized by a noncollinear balanced optical cross-correlator that maps the time difference to the sum frequency intensity of the amplifier and oscillator laser pulses. A feedback loop was employed to correct the timing jitter by adjusting the time delay line in the amplifier beam path. The timing fluctuation was reduced to 1.26 fs root-mean-square from hundreds of fs over 10 hours. Benefitting from excellent performance and long-term stability, this timing jitter correction scheme, as a component of optical synchronization in the 100 PW laser facility, will be integrated into SEL.

Style APA, Harvard, Vancouver, ISO itp.

31

Zweck, John, i Curtis R. Menyuk. "Computation of the timing jitter, phase jitter, and linewidth of a similariton laser". Journal of the Optical Society of America B 35, nr 5 (27.04.2018): 1200. http://dx.doi.org/10.1364/josab.35.001200.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Muñoz, Christian Daniel, Juan Coronel, Margarita Varon, Fabien Destic i Angelique Rissons. "Low-Timing-Jitter and Low-Phase-Noise Microwave Signal Generation Using a VCSEL-Based Optoelectronic Oscillator". Ingeniería e Investigación 42, nr 2 (29.10.2021): e87189. http://dx.doi.org/10.15446/ing.investig.v42n2.87189.

Pełny tekst źródła

Streszczenie:

This article presents the first results of the timing-jitter characterization of a VCSEL-based optoelectronic oscillator (VBO) at 2,5GHz. For all implementations, vertical-cavity surface-emitting lasers (VCSEL) emitting in the O and C-bands were characterized. The resonant cavity was modified through the optical delay line length to verify its impact on timing-jitter and phase noise of the VBO. The lowest peak-to-peak jitter value obtained experimentally was 71 mUI when the optical fiber length was 1 km, whereas the lowest phase noise was -124 dBc/Hz with 5 km. This phase noise value, measured at 10 kHz offset, represents an 8 dB improvement compared to previous results, and it is the lowest value reported in the literature for the VBO architecture at 2,5GHz.

Style APA, Harvard, Vancouver, ISO itp.

33

Bergamin, Gianmario, i Alexandre Pierre Soulier. "A simulation methodology for establishing IR-drop-induced clock jitter for high precision timing ASICs". Journal of Instrumentation 19, nr 02 (1.02.2024): C02023. http://dx.doi.org/10.1088/1748-0221/19/02/c02023.

Pełny tekst źródła

Streszczenie:

Abstract The combination of 3D tracking and high-precision timing measurements has been identified by the European Committee for Future Accelerators as a fundamental requirement to increase detection capabilities for future applications. Among others, on-chip high-quality clock is a key factor determining the overall resolution of timing ASICs. However, in large and dense chips, power-grid drops can severely affect the non-deterministic jitter of the clock, representing a limit to the performances. This contribution presents a simulation framework based on commercial tools to derive power supply-induced jitter, providing a pre-silicon methodology to assess its impact to timing indeterminism. The flow is presented together with practical examples and results.

Style APA, Harvard, Vancouver, ISO itp.

34

Park, Kwang, Jeungmin Joo, Sungsoo Choi i Kiseon Kim. "EFFECTS OF TIMING JITTER IN TH-BPSK UWB SYSTEMS APPLYING THE FCC-CONSTRAINT PULSES UNDER NAKAGAMI-M FADING CHANNEL". SYNCHROINFO JOURNAL 7, nr 6 (2021): 21–25. http://dx.doi.org/10.36724/2664-066x-2021-7-6-21-25.

Pełny tekst źródła

Streszczenie:

Ultra wideband (UWB) technology has obtained lots of attention as a strong candidate for short range indoor wireless communication because of low power consumption, low cost implementation and the robustness against multipath fading. It uses trains of short pulses which widely spread the signal energy in frequency domain. Since such large bandwidth can cause interference with other narrow band communication systems, the federal communications commission (FCC) has restricted not only the frequency region from 3.1GHz to 10.6GHz but also the transmission power level for commercial use of UWB systems. The effects of timing jitter on time hopping binary phase shift keying (TH-BPSK) UWB systems applying the FCC-constraint pulses are investigated under flat Nakagami-mfading channel and additive white Gaussian noise (AWGN). The numerical results show that two FCC-constraint pulses, PSP and MMNHP, have almost same sensitivity to the timing jitter even though they have different transceiver complexity. Additionally, the additional required power due to the timing jitter exponentially increases, but that due to the amplitude fading is not exceeded over 4dB.

Style APA, Harvard, Vancouver, ISO itp.

35

Yihan Pi, 皮一涵, 王春泽 Chunze Wang, 宋有建 Youjian Song i 胡明列 Minglie Hu. "Ultra-low timing jitter femtosecond laser technology (Invited)". Infrared and Laser Engineering 49, nr 12 (2020): 20201058. http://dx.doi.org/10.3788/irla20201058.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Shehata, Mohamed, Ke Wang, Julian Webber, Masayuki Fujita, Tadao Nagatsuma i Withawat Withayachumnankul. "Timing-Jitter Tolerant Nyquist Pulse for Terahertz Communications". Journal of Lightwave Technology 40, nr 2 (15.01.2022): 557–64. http://dx.doi.org/10.1109/jlt.2021.3121814.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Yihan Pi, 皮一涵, 王春泽 Chunze Wang, 宋有建 Youjian Song i 胡明列 Minglie Hu. "Ultra-low timing jitter femtosecond laser technology (Invited)". Infrared and Laser Engineering 49, nr 12 (2020): 20201058. http://dx.doi.org/10.3788/irla.7_invited-1058.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Lacaze, Bernard, i Corinne Mailhes. "Reconstruction of sampled complex processes with timing jitter". Sampling Theory in Signal and Image Processing 3, nr 2 (maj 2004): 133–56. http://dx.doi.org/10.1007/bf03549410.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Kusama, H., i T. Yagi. "Laser-triggered low timing jitter coaxial Marx generator". IEEE Transactions on Plasma Science 25, nr 6 (1997): 1431–34. http://dx.doi.org/10.1109/27.650914.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Casanova, Alexis, Quentin D’Acremont, Giorgio Santarelli, Stefan Dilhaire i Antoine Courjaud. "Ultrafast amplifier additive timing jitter characterization and control". Optics Letters 41, nr 5 (18.02.2016): 898. http://dx.doi.org/10.1364/ol.41.000898.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

WADA, Kenji, Yuki YAMAGAMI, Tetsuya MATSUYAMA i Hiromichi HORINAKA. "Timing Jitter Measurement of Gain-Switched Semiconductor Lasers". Review of Laser Engineering 43, nr 6 (2015): 371. http://dx.doi.org/10.2184/lsj.43.6_371.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Farhang-Boroujeny, B., i G. Mathew. "Nyquist filters with robust performance against timing jitter". IEEE Transactions on Signal Processing 46, nr 12 (1998): 3427–31. http://dx.doi.org/10.1109/78.735318.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Souders, T. M., D. R. Flach, C. Hagwood i G. L. Yang. "The effects of timing jitter in sampling systems". IEEE Transactions on Instrumentation and Measurement 39, nr 1 (1990): 80–85. http://dx.doi.org/10.1109/19.50421.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Miki, S., S. Miyajima, M. Yabuno, T. Yamashita, T. Yamamoto, N. Imoto, R. Ikuta, R. A. Kirkwood, R. H. Hadfield i H. Terai. "Superconducting coincidence photon detector with short timing jitter". Applied Physics Letters 112, nr 26 (25.06.2018): 262601. http://dx.doi.org/10.1063/1.5037254.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Messerschmitt, D. "Asynchronous and Timing Jitter Insensitive Data Echo Cancellation". IEEE Transactions on Communications 34, nr 12 (grudzień 1986): 1209–17. http://dx.doi.org/10.1109/tcom.1986.1096487.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Rylyakov, A. V., i K. K. Likharev. "Pulse jitter and timing errors in RSFQ circuits". IEEE Transactions on Appiled Superconductivity 9, nr 2 (czerwiec 1999): 3539–44. http://dx.doi.org/10.1109/77.783794.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Jones, E. V., i S. Zhu. "Data sequence coding for low jitter timing recovery". Electronics Letters 23, nr 7 (1987): 337. http://dx.doi.org/10.1049/el:19870249.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Landolsi, M. A. "Minimisation of timing jitter in CDMA code tracking". Electronics Letters 40, nr 21 (2004): 1352. http://dx.doi.org/10.1049/el:20045944.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Mecozzi, Antonio, Michele Midrio i Marco Romagnoli. "Timing jitter in soliton transmission with sliding filters". Optics Letters 21, nr 6 (15.03.1996): 402. http://dx.doi.org/10.1364/ol.21.000402.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

Grein, M. E., H. A. Haus, Y. Chen i E. P. Ippen. "Quantum-limited timing jitter in actively modelocked lasers". IEEE Journal of Quantum Electronics 40, nr 10 (październik 2004): 1458–70. http://dx.doi.org/10.1109/jqe.2004.834784.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Artykuły w czasopismach na temat „Timing jitter”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych