Gotowa bibliografia na temat „Thermodynamic Equilibrium Calculations”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Thermodynamic Equilibrium Calculations”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Thermodynamic Equilibrium Calculations"
Zhang, Tao, i Shuyu Sun. "Thermodynamics-Informed Neural Network (TINN) for Phase Equilibrium Calculations Considering Capillary Pressure". Energies 14, nr 22 (18.11.2021): 7724. http://dx.doi.org/10.3390/en14227724.
Pełny tekst źródłaSundman, Bo, i John Ågren. "Computer Applications in the Development of Steels". MRS Bulletin 24, nr 4 (kwiecień 1999): 32–36. http://dx.doi.org/10.1557/s0883769400052167.
Pełny tekst źródłaBelov, G. V. "Calculation of Equilibrium Composition of Complex Thermodynamic Systems using Julia Language and Ipopt Library". Herald of the Bauman Moscow State Technical University. Series Instrument Engineering, nr 3 (136) (wrzesień 2021): 24–45. http://dx.doi.org/10.18698/0236-3933-2021-3-24-45.
Pełny tekst źródłaEwing, Mark E., i Daron A. Isaac. "Thermodynamic Property Calculations for Equilibrium Mixtures". Journal of Thermophysics and Heat Transfer 32, nr 1 (styczeń 2018): 118–28. http://dx.doi.org/10.2514/1.t5144.
Pełny tekst źródłaLothenbach, Barbara. "Thermodynamic equilibrium calculations in cementitious systems". Materials and Structures 43, nr 10 (17.04.2010): 1413–33. http://dx.doi.org/10.1617/s11527-010-9592-x.
Pełny tekst źródłaFöldényi, Rita, i Aurél Marton. "Organisation of the Analytical, Stoichiometric, and Thermodynamic Information for water Chemistry Calculations". Hungarian Journal of Industry and Chemistry 43, nr 1 (1.06.2015): 33–38. http://dx.doi.org/10.1515/hjic-2015-0006.
Pełny tekst źródłaRamette, Richard W. "REACT: Exploring Practical Thermodynamic and Equilibrium Calculations". Journal of Chemical Education 72, nr 3 (marzec 1995): 240. http://dx.doi.org/10.1021/ed072p240.
Pełny tekst źródłaNovák, Josef P., Vlastimil Růžička, Jaroslav Matouš i Jiří Pick. "Liquid-liquid equilibrium. Computation of liquid-liquid equilibrium in terms of an equation of state". Collection of Czechoslovak Chemical Communications 51, nr 7 (1986): 1382–92. http://dx.doi.org/10.1135/cccc19861382.
Pełny tekst źródłaPelton, A. D. "Thermodynamic databases and equilibrium calculations in metallurgical processes". Pure and Applied Chemistry 69, nr 5 (1.01.1997): 969–78. http://dx.doi.org/10.1351/pac199769050969.
Pełny tekst źródłaZe-Qing, Wu, Han Guo-Xing i Pang Jin-Qiao. "Opacity Calculations for Non-Local Thermodynamic Equilibrium Mixtures". Chinese Physics Letters 19, nr 4 (26.03.2002): 518–20. http://dx.doi.org/10.1088/0256-307x/19/4/321.
Pełny tekst źródłaRozprawy doktorskie na temat "Thermodynamic Equilibrium Calculations"
Qu, Jingang. "Acceleration of Numerical Simulations with Deep Learning : Application to Thermodynamic Equilibrium Calculations". Electronic Thesis or Diss., Sorbonne université, 2023. https://accesdistant.sorbonne-universite.fr/login?url=https://theses-intra.sorbonne-universite.fr/2023SORUS530.pdf.
Pełny tekst źródłaNumerical simulations are a powerful tool for analyzing dynamic systems, but can be computationally expensive and time-consuming for complex systems with high resolution. Over the past decades, researchers have been striving to accelerate numerical simulations through algorithmic improvements and high-performance computing (HPC). More recently, artificial intelligence (AI) for science is on the rise and involves using AI techniques, specifically machine learning and deep learning, to solve scientific problems and accelerate numerical simulations, having the potential to revolutionize a wide range of fields. The primary goal of this thesis is to speed up thermodynamic equilibrium calculations by means of techniques used to accelerate numerical simulations. Thermodynamic equilibrium calculations are able to identify the phases of mixtures and their compositions at equilibrium and play a pivotal role in many fields, such as chemical engineering and petroleum industry. We achieve this goal from two aspects. One the one hand, we use deep learning frameworks to rewrite and vectorize algorithms involved in thermodynamic equilibrium calculations, facilitating the use of diverse hardware for HPC. On the other hand, we use neural networks to replace time-consuming and repetitive subroutines of thermodynamic equilibrium calculations, which is a widely adopted technique of AI for science. Another focus of this thesis is to address the challenge of domain generalization (DG) in image classification. DG involves training models on known domains that can effectively generalize to unseen domains, which is crucial for deploying models in safety-critical real-world applications. DG is an active area of research in deep learning. Although various DG methods have been proposed, they typically require domain labels and lack interpretability. Therefore, we aim to develop a novel DG algorithm that does not require domain labels and is more interpretable
Zinser, Alexander [Verfasser], Kai [Gutachter] Sundmacher i Achim [Gutachter] Kienle. "Dynamic methods for thermodynamic equilibrium calculations in process simulation and process optimization / Alexander Zinser ; Gutachter: Kai Sundmacher, Achim Kienle". Magdeburg : Universitätsbibliothek Otto-von-Guericke-Universität, 2019. http://d-nb.info/1219937207/34.
Pełny tekst źródłaHöglund, Andreas. "Electronic Structure Calculations of Point Defects in Semiconductors". Doctoral thesis, Uppsala universitet, Fysiska institutionen, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-7926.
Pełny tekst źródłaBelsito, Danielle L. "Application of Computational Thermodynamic and Solidification Kinetics to Cold Sprayable Powder Alloy Design". Digital WPI, 2014. https://digitalcommons.wpi.edu/etd-dissertations/28.
Pełny tekst źródłaLundholm, Karin. "Fate of Cu, Cr, As and some other trace elements during combustion of recovered waste fuels". Doctoral thesis, Umeå : Department of Applied Physics and Electronics, Umeå Univ, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-1132.
Pełny tekst źródłaBratberg, Johan. "Phase equilibria and thermodynamic properties of high-alloy tool steels : theoretical and experimental approach". Doctoral thesis, Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-453.
Pełny tekst źródłaYamada, Ryo. "Application of Steepest-Entropy-Ascent Quantum Thermodynamics to Solid-State Phenomena". Diss., Virginia Tech, 2018. http://hdl.handle.net/10919/85866.
Pełny tekst źródłaPh. D.
Many engineering materials have physical and chemical properties that change with time. The tendency of materials to change is quantified by the field of thermodynamics. The first and second laws of thermodynamics establish conditions under which a material has no tendency to change; these conditions are called equilibrium states. When a material is not in an equilibrium state, it is able to change spontaneously. Classical thermodynamics reliably identifies whether a material is susceptible to change, but it is incapable of predicting how change will take place or how fast it will occur. These are kinetic questions that fall outside the purview of thermodynamics. A relatively new theoretical treatment developed by Hatsopoulos, Gyftopoulos, Beretta and others over the past forty years extends classical thermodynamics into the kinetic realm. This framework, called steepest-entropy-ascent quantum thermodynamics (SEAQT), combines the tools of thermodynamics with quantum mechanics through a postulated equation of motion. Solving the equation of motion provides a kinetic description of the path a material will take as it changes from a non-equilibrium state to stable equilibrium. To date, the SEAQT framework has been applied primarily to systems of gases. In this dissertation, solid-state models are employed to extend the SEAQT approach to solid materials. The SEAQT framework is used to predict the thermal expansion of silver, the magnetization of iron, and the kinetics of atomic clustering and ordering in binary solid-solutions as a function of time or temperature. The model makes it possible to predict a unique kinetic path from any arbitrary, non-equilibrium, initial state to a stable equilibrium state. In each application, the approach is tested against experimental data. In addition to reproducing the qualitative kinetic trends in the cases considered, the SEAQT framework shows promise for modeling the behavior of materials far from equilibrium.
Davie, Stuart James. "Relative Free Energies from Non-Equilibrium Simulations: Application to Changes in Density". Thesis, Griffith University, 2014. http://hdl.handle.net/10072/365922.
Pełny tekst źródłaThesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School of Biomolecular and Physical Sciences
Science, Environment, Engineering and Technology
Full Text
Razavi, Seyed Mostafa. "OPTIMIZATION OF A TRANSFERABLE SHIFTED FORCE FIELD FOR INTERFACES AND INHOMOGENEOUS FLUIDS USING THERMODYNAMIC INTEGRATION". University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1481881698375321.
Pełny tekst źródłaMaghsoodloobabakhani, Saheb. "Cristallisation à l'équilibre et hors équilibre d'hydrates mixtes de gaz : Mesures PVTx et modélisation thermodynamique". Thesis, Lyon, 2018. http://www.theses.fr/2018LYSEM027.
Pełny tekst źródłaIn this work, in order to investigate the non-equilibrium behaviors of mixed clathrate hydrates, vapor-liquid-hydrate phase equilibria of mixed gas hydrates from CH4-C2H6-C3H8-nC4H10-CO2-N2 are studied. Two different experimental procedures are used: at quick and slow crystallization rates. The aim is to examine the effects of crystallization rate on the final state, either under usual dynamic (quick formation) or steady state conditions (slow formation). Unlike most of the literature data, providing temperature-pressure-vapor composition (PTy) results, this study also furnishes hydrate composition, volume, storage capacity, density, or hydration number and water conversion. At quick crystallization, hydrate volume increases from 2% to 69% according to the gas mixture. Moreover, storage capacity decreases with increasing rate of crystallization. In addition, a thermodynamic model, based on classical van der Waals and Platteuw method and Kihara potential, has been used. A new set of Kihara parameters for propane, based on slow crystallization, has been obtained successfully and compared to the literature.Besides, a review on guest composition in hydrates from experimental results is suggested, based on open literature. Then, the capability of thermodynamic modeling to simulate these rare data has been investigated. While simulation tools are interesting to predict phase equilibria for light molecules, they become less reliable when phase transition occurs in the system, or when heavier molecules are involved. In addition, the use of RAMAN spectroscopy has illustrated phase transition for CO2/C3H8 mixed hydrates under CO2 rich gas conditions.To conclude, the rate of crystallization significantly influences the process of mixed hydrates formation. The use of a thermodynamic flash shows that slow crystallization is necessary to satisfy the thermodynamic equilibrium, and thus increase storage capacity, and optimize hydrate processes
Książki na temat "Thermodynamic Equilibrium Calculations"
1940-, Sandler Stanley I., red. Models for thermodynamic and phase equilibria calculations. New York: Dekker, 1994.
Znajdź pełny tekst źródłaGupta, Roop N. Calculations and curve fits of thermodynamic and transport properties for equilibrium air to 30000 K. Hampton, Va: Langley Research Center, 1991.
Znajdź pełny tekst źródłaN, Gupta Roop, i United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., red. Calculations and curve fits of thermodynamic and transport properties for equilibrium air to 30 000 K. [Washington, D.C.]: National Aeronautics and Space Administration, Scientific and Technical Information Program, 1991.
Znajdź pełny tekst źródłaGordon, Sanford. Computer program for calculation of complex chemical equilibrium compositions and applications. [Cleveland, Ohio]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1996.
Znajdź pełny tekst źródłaGordon, Sanford. Computer program for calculation of complex chemical equilibrium compositions and applications. [Washington, D.C.]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1994.
Znajdź pełny tekst źródłaGordon, Sanford. Computer program for calculation of complex chemical equilibrium compositions and applications. Washington, D.C: NASA, 1994.
Znajdź pełny tekst źródłaA, Reno Martin, Gordon Sanford i United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., red. CET93 and CETPC: An interim updated version of the NASA Lewis computer program for calculating complex chemical equilibria with applications. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1994.
Znajdź pełny tekst źródłaCalculations and curve fits of thermodynamic and transport properties for equilibrium air to 30 000 K. Washington, D.C: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1991.
Znajdź pełny tekst źródłaCurrier, Robert Patrick. A statistical mechanical group contribution method for calculating thermodynamic properties of fluids. 1987.
Znajdź pełny tekst źródłaElectrical Installation Calculations: For Compliance with BS 7671. Blackwell Science Inc, 1998.
Znajdź pełny tekst źródłaCzęści książek na temat "Thermodynamic Equilibrium Calculations"
Chen, Long-Qing. "Thermodynamic Calculations of Materials Processes". W Thermodynamic Equilibrium and Stability of Materials, 175–239. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-13-8691-6_8.
Pełny tekst źródłaStateva, Roumiana P., i Georgi St Cholakov. "Challenges in the Modeling of Thermodynamic Properties and Phase Equilibrium Calculations for Biofuels Process Design". W Process Systems Engineering for Biofuels Development, 85–120. Chichester, UK: John Wiley & Sons, Ltd, 2020. http://dx.doi.org/10.1002/9781119582694.ch4.
Pełny tekst źródłaDuan, Yu, i Guobin Xu. "Analysis of River Stability in the Middle Reaches of Huaihe River Based on Non-equilibrium Thermodynamicsins". W Lecture Notes in Civil Engineering, 1030–40. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6138-0_91.
Pełny tekst źródłaBharti, Anand, Debashis Kundu, Dharamashi Rabari i Tamal Banerjee. "COSMO-SAC: A Predictive Model for Calculating Thermodynamic Properties on a-priori Basis". W Phase Equilibria in Ionic Liquid Facilitated Liquid–Liquid Extractions, 53–90. Boca Raton, FL : CRC Press, Taylor & Francis Group, [2017]: CRC Press, 2017. http://dx.doi.org/10.1201/9781315367163-3.
Pełny tekst źródłaRiyahi Malayeri, Kamrooz, Patrik Ölund i Ulf Sjöblom. "Thermodynamic Calculations Versus Instrumental Analysis of Slag-Steel Equilibria in an ASEA–SKF Ladle Furnace". W Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings, 1–11. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2014. http://dx.doi.org/10.1520/stp158020140025.
Pełny tekst źródłaHe, Ruoyu, Guangmin Zhao i Yidong Luo. "Study on the effect of sulfur and silicon dioxide on the reaction of CaO and Na2O with chromium during municipal solid waste incineration based on thermodynamic equilibrium calculation". W Advances in Civil Engineering and Environmental Engineering, Volume 2, 281–86. London: CRC Press, 2023. http://dx.doi.org/10.1201/9781003383031-43.
Pełny tekst źródłaClugston, Michael, Malcolm Stewart i Fabrice Birembaut. "Chemical Equilibrium". W Making the Transition to University Chemistry. Oxford University Press, 2021. http://dx.doi.org/10.1093/hesc/9780198757153.003.0006.
Pełny tekst źródłaAtkins, Peter, Julio de Paula i David Smith. "The origin of thermodynamic properties". W Elements of Physical Chemistry. Oxford University Press, 2016. http://dx.doi.org/10.1093/hesc/9780198727873.003.0072.
Pełny tekst źródłaSemeshkin, Vitalii, i Radion Cherkez. "RELATIONSHIP OF NON-EQUILIBRIUM THERMODYNAMICS IN THE HETEROGENEOUS PERMEABLE THERMOELEMENTS". W Science, technology and innovation in the modern world. Publishing House “Baltija Publishing”, 2023. http://dx.doi.org/10.30525/978-9934-26-364-4-1.
Pełny tekst źródła"Chapter 11 | Chemical Equilibrium Calculations". W The ASTM Computer Program for Chemical Thermodynamic and Energy Release Evaluation - Chetah® Version 11.0, 77–84. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2020. http://dx.doi.org/10.1520/ds51hol20200011.
Pełny tekst źródłaStreszczenia konferencji na temat "Thermodynamic Equilibrium Calculations"
Hurley, C. D., M. Whiteman i C. W. Wilson. "The Calculation of Thermodynamic Non Equilibrium Combustion Product Compositions". W ASME 1999 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/99-gt-275.
Pełny tekst źródłaZimmer, A. T., i P. Biswas. "336. Thermodynamic Equilibrium Calculations as an Occupational Assessment Tool: Welding Alloy Examples". W AIHce 1998. AIHA, 1999. http://dx.doi.org/10.3320/1.2762736.
Pełny tekst źródłaZhao, Baofeng, Li Sun, Xiaodong Zhang, Lei Chen, Jie Zhang, Guangfan Meng i Xiangmei Meng. "Thermodynamic Equilibrium Analysis of Rice Husk Pyrolysis". W ASME Turbo Expo 2008: Power for Land, Sea, and Air. ASMEDC, 2008. http://dx.doi.org/10.1115/gt2008-51052.
Pełny tekst źródłaHosokawa, Yoshifumi. "Models for chloride ion bindings in hardened cement paste using thermodynamic equilibrium calculations". W 2nd International RILEM Symposium on Advances in Concrete through Science and Engineering. RILEM Publications, 2006. http://dx.doi.org/10.1617/2351580028.025.
Pełny tekst źródłaPaolini, Christopher P., i Subrata Bhattacharjee. "The IGE Model: An Extension of the Ideal Gas Model to Include Chemical Composition as Part of the Equilibrium State". W ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-40762.
Pełny tekst źródłaDepraz, Se´bastien, Philippe Rivie`re, Marie-Yvonne Perrin i Anouar Soufiani. "Band Models for Radiative Transfer in Non-LTE Diatomic Molecules of CO2-N2 Plasmas". W 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-22301.
Pełny tekst źródłaRowe, A., M. Karunaratne i R. C. Thomson. "NiCoCrAlYHf Coating Evolution through Multiple Refurbishment Processing on a Single Crystal Nickel Superalloy". W AM-EPRI 2013, redaktorzy D. Gandy i J. Shingledecker. ASM International, 2013. http://dx.doi.org/10.31399/asm.cp.am-epri-2013p0412.
Pełny tekst źródłaKermani, Mohammad J., i Andrew G. Gerber. "Thermodynamic and Aerodynamic Loss Evaluation of Supersonic Nucleating Steam With Shocks". W ASME 2002 Joint U.S.-European Fluids Engineering Division Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/fedsm2002-31087.
Pełny tekst źródłaKorotkikh, A., i I. Sorokin. "EFFECT OF BORON ON THE COMBUSTION CHARACTERISTICS OF METALLIZED HIGH-ENERGY MATERIALS". W 9TH INTERNATIONAL SYMPOSIUM ON NONEQUILIBRIUM PROCESSES, PLASMA, COMBUSTION, AND ATMOSPHERIC PHENOMENA. TORUS PRESS, 2020. http://dx.doi.org/10.30826/nepcap9a-31.
Pełny tekst źródłaWu, Bei, i Hui Zhang. "Vapor Transport Controlled Process Models for AlN Bulk Sublimation Growth". W ASME 2004 Heat Transfer/Fluids Engineering Summer Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/ht-fed2004-56564.
Pełny tekst źródłaRaporty organizacyjne na temat "Thermodynamic Equilibrium Calculations"
Kotlar, Anthony J. The Proper Interpretation of the Internal Energy of Formation Used in Thermodynamic Equilibrium Calculations. Fort Belvoir, VA: Defense Technical Information Center, lipiec 1992. http://dx.doi.org/10.21236/ada252369.
Pełny tekst źródłaCrowley, David, Yitzhak Hadar i Yona Chen. Rhizosphere Ecology of Plant-Beneficial Microorganisms. United States Department of Agriculture, luty 2000. http://dx.doi.org/10.32747/2000.7695843.bard.
Pełny tekst źródłaTrowbridge, L. D., i J. M. Leitnaker. SOLGAS refined: A computerized thermodynamic equilibrium calculation tool. Office of Scientific and Technical Information (OSTI), listopad 1993. http://dx.doi.org/10.2172/10137601.
Pełny tekst źródłaTerah, E. I. Practical classes in general chemistry for students of specialties «General Medicine», «Pediatrics», «Dentistry». SIB-Expertise, kwiecień 2022. http://dx.doi.org/10.12731/er0556.13042022.
Pełny tekst źródłaTrowbridge, L. D., i J. M. Leitnaker. A spreadsheet-coupled SOLGAS: A computerized thermodynamic equilibrium calculation tool. Revision 1. Office of Scientific and Technical Information (OSTI), lipiec 1995. http://dx.doi.org/10.2172/106516.
Pełny tekst źródła