Zaloguj się

Gotowe bibliografie tematyczne / Thermal / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Thermal.

Artykuły w czasopismach na temat „Thermal”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 1 sierpnia 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Thermal”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Lee, Seung-Rae. "Thermal Behavior of Energy Pile Considering Ground Thermal Conductivity and Thermal Interference Between Piles". Journal of the Korean Society of Civil Engineers 33, nr 6 (2013): 2381. http://dx.doi.org/10.12652/ksce.2013.33.6.2381.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Cowling, I. D., S. Willcox, Y. Patel, P. Smith i M. Roberts. "Increasing persistence of UAVs and MAVs through thermal soaring". Aeronautical Journal 113, nr 1145 (lipiec 2009): 479–89. http://dx.doi.org/10.1017/s0001924000003146.

Pełny tekst źródła

Streszczenie:

Abstract This work looks to harness atmospheric energy through thermal soaring to optimise the flight persistence of Micro Air Vehicles (MAVs) and Unmanned Air Vehicles (UAVs). There are two key challenges when considering thermal soaring, the first being the locating of thermals and the second being the extraction of the maximum potential energy from the thermals. Thermal location is by no means an exact science with experienced glider pilots needing to consider many factors to improve the probability of encountering a thermal. As thermals are caused by the uneven heating of the Earth’s surface it is, however, possible to predict likely thermal locations. With the application of a suitable guidance algorithm which considers these ‘hot spots’ it is possible to increase the likelihood of encountering a thermal. Once a thermal is found it is important to attempt to extract the maximum energy from the thermal. To do this the vehicle needs to move quickly to the centre of the thermal. There are many potential techniques for thermal centring, some of which appear to be entirely contradictory to each other, the crucial factor determining the success of such a technique has been found to be the response time of the onboard sensors. This paper considers the many aspects of thermal soaring such as locating thermals, thermal detection and thermal centring. Five different thermal models are presented which are used to demonstrate the thermal centring techniques. Finally a commercial glider simulation package is used to demonstrate the control architecture and simulate a fully autonomous flight.

Style APA, Harvard, Vancouver, ISO itp.

3

Fitch, J. S., L. Monier i H. Tamet. "Thermap: a thermal model for microprocessors". IEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A 18, nr 3 (1995): 553–58. http://dx.doi.org/10.1109/95.465152.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

DAHAM, Sadoon R., Nebras H. GHAEB i Faiz F. MUSTAFA. "Topographical thermal imaging for solid square shaft cooling". Journal of Thermal Engineering 7, nr 14 (30.12.2021): 1970–79. http://dx.doi.org/10.18186/thermal.1051323.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Hayashi, Morihito, i Hayato Mouri. "E-3 MONOSEMOUSNESS OF THERMAL PLASTIC STRAIN ON THERMAL FATIGUE LIFE IN FERRITE DUCTILE CAST IRON(Session: Thermal Fatique/Creep)". Proceedings of the Asian Symposium on Materials and Processing 2006 (2006): 95. http://dx.doi.org/10.1299/jsmeasmp.2006.95.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Graetsch, Heribert A. "Thermal expansion and thermally induced variations of the crystal structure of AlPO4 low cristobalite". Neues Jahrbuch für Mineralogie - Monatshefte 2003, nr 7 (15.07.2003): 289–301. http://dx.doi.org/10.1127/0028-3649/2003/2003-0289.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Tolibjonovich, Tojiboyev Boburjon. "LIQUID COMPOSITE THERMAL INSULATION COATINGS AND METHODS FOR DETERMINING THEIR THERMAL CONDUCTIVITY". International Journal of Advance Scientific Research 02, nr 03 (1.03.2022): 42–50. http://dx.doi.org/10.37547/ijasr-02-03-07.

Pełny tekst źródła

Streszczenie:

The article describes the analysis of existing methods for determining the thermal conductivity of liquid composite thermal insulation coatings and the results of experimental studies on its improvement.

Style APA, Harvard, Vancouver, ISO itp.

8

Tarshish, Nathaniel, Nadir Jeevanjee i Daniel Lecoanet. "Buoyant Motion of a Turbulent Thermal". Journal of the Atmospheric Sciences 75, nr 9 (28.08.2018): 3233–44. http://dx.doi.org/10.1175/jas-d-17-0371.1.

Pełny tekst źródła

Streszczenie:

Abstract By introducing an equivalence between magnetostatics and the equations governing buoyant motion, we derive analytical expressions for the acceleration of isolated density anomalies (thermals). In particular, we investigate buoyant acceleration, defined as the sum of the Archimedean buoyancy B and an associated perturbation pressure gradient. For the case of a uniform spherical thermal, the anomaly fluid accelerates at 2B/3, extending the textbook result for the induced mass of a solid sphere to the case of a fluid sphere. For a more general ellipsoidal thermal, we show that the buoyant acceleration is a simple analytical function of the ellipsoid’s aspect ratio. The relevance of these idealized uniform-density results to turbulent thermals is explored by analyzing direct numerical simulations of thermals at a Reynolds number (Re) of 6300. We find that our results fully characterize a thermal’s initial motion over a distance comparable to its length. Beyond this buoyancy-dominated regime, a thermal develops an ellipsoidal vortex circulation and begins to entrain environmental fluid. Our analytical expressions do not describe the total acceleration of this mature thermal, but they still accurately relate the buoyant acceleration to the thermal’s mean Archimedean buoyancy and aspect ratio. Thus, our analytical formulas provide a simple and direct means of estimating the buoyant acceleration of turbulent thermals.

Style APA, Harvard, Vancouver, ISO itp.

9

Sobamowo, M. G. "THERMAL PERFORMANCE ANALYSIS OF CONVECTIVE-RADIATIVE FIN WITH TEMPERATURE-DEPENDENT THERMAL CONDUCTIVITY IN THE PRESENCE OF UNIFORM MAGNETIC FIELD USING PARTIAL NOETHER METHOD". Journal of Thermal Engineering 4, nr 5 (28.06.2018): 2287–302. http://dx.doi.org/10.18186/thermal.438485.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Kishore, Abhishek, i Ameen Uddin Ahmad. "Ocean Thermal Energy Conversion". International Journal of Trend in Scientific Research and Development Volume-1, Issue-5 (31.08.2017): 412–15. http://dx.doi.org/10.31142/ijtsrd2314.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Sinha, Dr Deepa A. "Thermal Properties of Concrete". Paripex - Indian Journal Of Research 3, nr 2 (15.01.2012): 90–91. http://dx.doi.org/10.15373/22501991/feb2014/27.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Saeed, Sarkawt Abdul-Rahman, Shler Saeed Qadir i Riyadh Hanna Shaan. "Thermal Insulating Concrete Tiles". Journal of Zankoy Sulaimani - Part A 10, nr 1 (6.02.2007): 53–58. http://dx.doi.org/10.17656/jzs.10163.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

FERROUDJ, Nawal, i Hasan KÖTEN. "NUMERICAL SIMULATION OF PRANDTL NUMBER EFFECT ON ENTROPY GENERATION IN A SQUARE CAVITY". Journal of Thermal Engineering 7, nr 4 (2.05.2021): 1016–29. http://dx.doi.org/10.18186/thermal.931364.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

HATAMİ, M., Farooq ALİ, Ammar ALSABERY, Songwei HU, D. JİNG i Hameed K. "MIXED CONVECTION HEAT TRANSFER OF SIO2-WATER AND ALUMINA-PAO NANO-LUBRICANTS USED IN A MECHANICAL BALL BEARING". Journal of Thermal Engineering 7, nr 2 (1.02.2021): 134–61. http://dx.doi.org/10.18186/thermal.871348.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

AL-GEBORY, Layth. "OPTICAL AND RADIATIVE PROPERTIES OF INDIVIDUAL AND HYBRID NANOSUSPENSIONS: THE EFFECTS OF SIMILAR AND DISSIMILAR PARTICLE AGGLOMERATES ON THERMAL RADIATION". Journal of Thermal Engineering 7, nr 2 (1.02.2021): 174–86. http://dx.doi.org/10.18186/thermal.871304.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

ÜNSÜR, Veysel. "STABILIZATION OF MINORITY CARRIER LIFETIME IN PERC STRUCTURED SILICON SOLAR CELL". Journal of Thermal Engineering 7, nr 2 (1.02.2021): 187–95. http://dx.doi.org/10.18186/thermal.871308.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

"Thermal Instability". International Journal of Science and Research (IJSR) 5, nr 3 (5.03.2016): 609–12. http://dx.doi.org/10.21275/v5i3.nov161898.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

"Thermal and Non-Thermal Plasma for Destruction of Pollutants". Journal of Plasma Chemistry and Plasma Processing Research 2, nr 1 (10.05.2022). http://dx.doi.org/10.33140/jpcppr.02.01.03.

Pełny tekst źródła

Streszczenie:

Wastewater remediation has become a global concern; thus, the development of innovative advanced oxidation processes (AOPs) for wastewater treatment is still a major challenge. Advanced oxidation processes (AOPs) are innovative tools that involve an introduction of energy (e.g., chemical, electrical and radiative) into the reaction zone to generate highly reactive species, especially hydroxyl radicals (HO•). In this sense, plasma technology is included among AOPs and considered as a promising remediation technology for water remediation. Developed since 1987 [1], the technique is environmentally friendly, simple and effective for decomposing toxic organic compounds in raw water or wastewater [2 - 4]. In view of these facts, applications of atmospheric pressure electrical plasma technologies for water treatment attract the increasing interest and emerge as technological opportunities for the plasma community [5].

Style APA, Harvard, Vancouver, ISO itp.

19

"Thermal and Non-Thermal Plasma for Destruction of Pollutants". Journal of Plasma Chemistry and Plasma Processing Research 2, nr 1 (5.02.2021). http://dx.doi.org/10.33140/jpcppr.02.01.01.

Pełny tekst źródła

Streszczenie:

Wastewater remediation has become a global concern; thus, the development of innovative advanced oxidation processes (AOPs) for wastewater treatment is still a major challenge. Advanced oxidation processes (AOPs) are innovative tools that involve an introduction of energy (e.g., chemical, electrical and radiative) into the reaction zone to generate highly reactive species, especially hydroxyl radicals (HO•). In this sense, plasma technology is included among AOPs and considered as a promising remediation technology for water remediation. Developed since 1987 [1], the technique is environmentally friendly, simple and effective for decomposing toxic organic compounds in raw water or wastewater [2 - 4]. In view of these facts, applications of atmospheric pressure electrical plasma technologies for water treatment attract the increasing interest and emerge as technological opportunities for the plasma community [5].

Style APA, Harvard, Vancouver, ISO itp.

20

ATGUR, Vinay, Gowda MANAVENDRA, G. p. DESAI i B. NAGESWARA RAO. "Experimental investigation on thermal conductivity and thermal degredation of Honge oil methyl ester with B-20 blend." Journal of Thermal Engineering, 22.11.2021, 1604–13. http://dx.doi.org/10.18186/thermal.1026846.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

PUTU SUSASTRIAWAN, Anak Agung, Yuli PURWANTO, Bambang Wahyu SIDHARTA i Noval SIOLIMBONA. "Thermal performance of cocoa pod cook stove". Journal of Thermal Engineering, 22.06.2022, 188–95. http://dx.doi.org/10.18186/thermal.1429918.

Pełny tekst źródła

Streszczenie:

Indonesia produces approximately 550.000 ton/year of cocoa pod waste from chocolate indus-try. The waste has a good potential to be used as a biomass feedstock of a cook stove. How-ever, thermal performance of the conventional cook stove is low when using a high moisture content feedstock, such as a cocoa pod waste. In addition, conventional cook stove generates high pollutant when high moisture content feedstock is used. In other to encounter the prob-lems, the present work develops gasifier based cocoa pod cook stove and investigates thermal performance of the stove at various equivalence ratios. The data collection is performed by varying equivalence ratio at 0.4, 0.5, and 0.6. Temperature of the stove, flame image, flame temperature, and water temperature are collected and used to analyze the thermal perfor-mance (i.e. useful heat and thermal efficiency) of the stove. The results reveal that a waste of cocoa pod can be used as a feedstock of gasifier based cook stove. Maximum useful heat of 1337.6 kJ and maximum thermal efficiency of 3.5% are obtained at optimum equivalence ratio of 0.5. To improve performance of the stove, the cocoa pod waste should be sun dried to reduce its moisture content and the porous burner may be applied as a burner of the gasifier based cook stove in the future work.

Style APA, Harvard, Vancouver, ISO itp.

22

Baidak, Yurii. "METHOD OF INDIRECT DETERMINATION OF THERMAL LOAD PARAMETER". Journal of Thermal Engineering, 25.02.2019, 84–92. http://dx.doi.org/10.18186/thermal.532158.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Dalkilic, Ahmet Selim. "DETERMINATION OF SOME DOMESTIC RADIATORS’ THERMAL CAPACITY NUMERICALLY". Journal of Thermal Engineering, 24.06.2019, 251–70. http://dx.doi.org/10.18186/thermal.581754.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

SINGH, Udayvir, i Naveen Kumar GUPTA. "Thermal performance analysis of heat pipe using response surface methdologyUdayvir". Journal of Thermal Engineering, 5.04.2023, 411–23. http://dx.doi.org/10.18186/thermal.1277897.

Pełny tekst źródła

Streszczenie:

Heat pipes are the specific class of heat exchangers. They are used in thermal management of electronic components. Research community is continuously working to obtain the optimum heat transfer performance. In present work, parametric study of heat pipe using nano- fluid has been carried out. The operating parameters of heat pipe like power supply, orientation (gravity assisted angle), filling- ratio, and nano-fluids concentration are being investigated to find the optimum thermal performance of heat pipe. Response surface method (RSM) is used to analyze the effect of operating parameters on thermal performance. The optimum value of thermal resistance and thermal efficiency are 0.3994 °C/Watt and 68.44% respectively. Most suitable power supply, inclination angle, filling ratio and nanofluid concentration are 185.85 W, 60.09°, 50.7% and 1.05 % respectively. The experimental results confirm and validate the RSM predicted results.

Style APA, Harvard, Vancouver, ISO itp.

25

NOOR, Dedy, Heru MIRMANTO, Joko SARSETIYANTO i Denny SOEDJONO. "Flow behavior and thermal separation mechanism on vortex tube". Journal of Thermal Engineering, 2.08.2021, 1090–99. http://dx.doi.org/10.18186/thermal.977941.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Yilbas, Bekir Sami. "COST EFFECTIVE OPERATION OF HVAC SYSTEM UNDER THERMAL DISTURBANCE". Journal of Thermal Engineering, 24.06.2019, 302–18. http://dx.doi.org/10.18186/thermal.581777.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

HAJİBEİGY, Mohammad Taghi, Rashmi WALVEKAR i Aravind CV. "MATHEMATICAL MODELLING, SIMULATION ANALYSIS OF A PHOTOVOLTAIC THERMAL SYSTEM". Journal of Thermal Engineering, 30.12.2020, 291–306. http://dx.doi.org/10.18186/thermal.850645.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

JANI, Mohammad Nazirul Syafiqaiman, i Nawaf SAEİD. "Thermal stress analysis in pin fin microchannel heat sink". Journal of Thermal Engineering, 2.03.2023, 273–85. http://dx.doi.org/10.18186/thermal.1448547.

Pełny tekst źródła

Streszczenie:

The conjugate heat transfer and the thermal stresses produced within a pin-fin microchannel heat sink are investigated numerically. The pin-fin microchannel heat sink is subjected to a constant heat flux from the bottom surface and cooled by water flow through the channel across the pin fins. Rectangular cross-section microchannel incorporating one raw of square pin fins are considered. The water flowing through the microchannel at Reynolds number varies from 200 to 800. The heat sink dissipates constant heat flux in the range of 75-175 kW/m2. The selected materials used for the solid substrate are Copper, Aluminium, Titanium, and Structural steel. The results are presented as contour plots for the temperature, thermal stress, and deformation distribution. It is found that the heat dissipation and the Nusselt number are increased with increasing Reynolds number, increasing the thermal conductivity of the mate-rial but remain constant throughout various heat fluxes. Thermal stresses are increased with decreasing Reynolds number, increasing heat flux, and increasing Youngs’ Modulus of the substrate material. The total deformation is increased with decreasing Reynolds number, in-creasing heat flux, and increasing the thermal expansion coefficient of the substrate material.

Style APA, Harvard, Vancouver, ISO itp.

29

J. ASALEKAR, Amol, D. v. A. RAMA SASTRY, M. b. s. Sreekara REDDY i Surendra D. BAREWAR. "Analysis of thermophysical properties of novel hybrid nanoparticles based vegetable nanofluid". Journal of Thermal Engineering, 22.05.2023, 1466–77. http://dx.doi.org/10.18186/thermal.1397183.

Pełny tekst źródła

Streszczenie:

Nano additive-based vegetable-oil fluids are playing a vital role in conventional thermal appli-cations due to their contribution to improved thermophysical properties. This work is focused on the synthesis and characterization of a novel ZnO-Ag hybrid nanoparticles-based sun-flower oil for thermal applications. Firstly, the ZnO-Ag hybrid nanoparticles were prepared by a wet chemical approach and characterized using SEM and TEM. The synthesized hybrid nanoparticles were then mixed in the sunflower oil to prepare various nanofluids at different volume concentrations ranging from 0.05 to 0.20%. The stability of the prepared nanofluids was investigated as a function of Zeta potential and visual examination. Further, the thermal conductivity and viscosity of prepared nanofluids were measured by the KD2-pro analyzer and Brookfield viscometer. The result showed that the thermal conductivity of prepared nano-fluids was increased up to 21.01% at 0.20% nanoparticles volume concentration. Finally, an artificial neural network model was developed to accurately predict the thermal conductivity of prepared nanofluids.

Style APA, Harvard, Vancouver, ISO itp.

30

KAMRAN, Mohammad, i Adnan QAYOUM. "Investigation of thermo-rheological properties of Fe3O4/Ethylene glycol nanofluid in a square cavity". Journal of Thermal Engineering, 28.05.2022, 1324–38. http://dx.doi.org/10.18186/thermal.1377221.

Pełny tekst źródła

Streszczenie:

Many fluids used in heat transfer and transport phenomena restrict the effectiveness of heat exchange equipment on account of their low thermal conductivity. Using nanofluids, the ef-fectiveness of heat exchange equipment is enhanced by many folds. The use of magnetic nano-fluids for heat transfer generates a prospect of regulating flow and controlling the thermal and transport properties particularly the thermal conductivity and viscosity using an externally applied magnetic field. The present study involves synthesis of oleic acid-coated magnetic nanofluids at varying concentrations of 0 to 0.643% by volume, measurement of thermal conductivity, rheological properties and corresponding numerical simulation of Nanofluid in a heated square cavity. The thermal conductivity measurement have been carried out by transient hot-wire method using KD2-pro at varying concentrations of solid phase. The re-sults show a significant increase in thermal conductivity with increase in particle concentra-tion. Rheological measurements show variation in viscosity with shear rate, temperature and concentration. Moreover, it has been found that at low particle loading magnetic nanofluids exhibited Newtonian behavior unlike non-Newtonian behavior at increased concentration. Numerical simulation of the magnetic nanofluid in the heated square cavity demonstrates the immense potential of augmentation of heat transfer coefficient using such fluids.

Style APA, Harvard, Vancouver, ISO itp.

31

GHARDE, Pankaj R., i Sanjay N. HAVALDAR. "Numerical investigation of an amalgamation of two phase change materials thermal energy storage system". Journal of Thermal Engineering, 29.05.2022, 263–72. http://dx.doi.org/10.18186/thermal.1448527.

Pełny tekst źródła

Streszczenie:

In the last three decades, many researchers have published their findings on the storage of thermal energy using various phase transition materials (both organic and non-organic). One of their goals was to have a higher heat storage capacity with a shorter heat charging cycle for thermal energy storage. This study looked into a floating capsule thermal energy storage system (TESS). A number of spherical capsules filled with beeswax were placed in a paraffin-filled cylindrical shell. With heat transfer fluid flowing through three hexagonal tubes arranged at 120° inside the TESS core, the two phase change materials (beeswax with a thermal conductivity of 0.25 W/mK and paraffin with a thermal conductivity of 0.23 W/mK) were charged and discharged. For the proposed TESS, a mathematical model was created and utilised to forecast thermal energy storage capacity and charging/discharge times for various configurations. In TESS, a 70–30% mixture of the two PCMs results in a 21.5 percent increase in heat storage capacity when beeswax alone is used, and an 8.4 percent decrease in storage capacity when paraffin alone is used. For a heat storage capacity of 7300 kJ, the model estimates charging and discharging times of around 2.6 and 3.2 hours, respectively.

Style APA, Harvard, Vancouver, ISO itp.

32

ÖZTUNA TANER, Öznur. "Energy and production analysis of a dairy milk factory: A case of study". Journal of Thermal Engineering, 30.08.2023, 1166–79. http://dx.doi.org/10.18186/thermal.1370731.

Pełny tekst źródła

Streszczenie:

This study illustrates a factory’s production efficiency by demonstrating its energy efficiency in the dairy milk industry. Determining the thermal energy to save energy enhances the prof-itability of the factory. The aim of this study is to conduct a thermal energy and production analysis of a dairy milk factory based on annual production. This study intends to make the conclusions more realistic by using production and energy data dependability analysis. The overall power consumption for the thermal and electric energy processes was found to be as 180,520 [W]. The target-specific energy consumption value was computed for Case 1 as 6,352.14 [MJ/t], for Case 2 as 5,898.67 [MJ/t], and for Case 3 as 5,445.21 [MJ/t]. The annual thermal (steam boiler) and electrical energy expenditures were obtained, with 315.87 [kW] of thermal (steam) energy and 80.98 [kW] of electrical energy. The total thermal and electri-cal energy reached 396.85 [kW]. Despite the factory’s expenditure on thermal and electrical energy, the energy efficiency was determined to be as 45.5%. The input energy was obtained to be 374.24 [kW] in Case 1, 356.33 [kW] in Case 2, and 342.08 [kW] in Case 3. The energy efficiency was calculated as 48.2 [%] for Case 1, 50.7 [%] for Case 2, and 52.8 [%] for Case 3. This study, which is expected to inspire future research, is also likely to assist livestock and agriculture in the energy field. The novelty of this study is that optimizing product efficiency and energy consumption in the production of milk and dairy products positively increases the energy efficiency of factories.

Style APA, Harvard, Vancouver, ISO itp.

33

LAKRAFLI, Hicham, Soufiane TAHIRI, Mohamed SENNOUNE i Abdelmajid BOUARDI. "Improving the energy efficiency of a refrigerated warehouse through the use of palm tree pruning waste as thermal insulator". Journal of Thermal Engineering, 14.04.2023, 332–41. http://dx.doi.org/10.18186/thermal.1283362.

Pełny tekst źródła

Streszczenie:

This work investigates the effect of palm tree pruning waste (PTPW) on thermal insulation and energy consumption of a refrigerated warehouse (RW). The thermal properties of PTPW depend strongly on its compactness, i.e. how much it weighs divided by how much space it takes up. The thermal conductivity of PTPW measured using the box method is about 0.069 W/m °C for a mass/occupied volume ratio of 0.064 g/cm3. It is comparable or lower than that of other natural materials discussed in the literature. The dynamic thermal simulation tool “TRNSYS” was applied to predict the thermal behavior of RW. The thickness of PTPW material was considered as variant to choose the better condition allowing achieving results very close to those of polyurethane. Obtained results highlight that 30 cm thick PTPW can reduce temperature by 1 to 2°C compared to 10 cm thick polyurethane. An improvement in the energy efficiency of the refrigerated warehouse was also highlighted. So, because of its performance, low cost, and eco-friendly nature, PTPW can compete with conventional insulating materials.

Style APA, Harvard, Vancouver, ISO itp.

34

ZIAD, Slimane, Imane BENOUDJAFER i Ibtissam BENOUDJAFER. "Towards the use of natural thermal insulation on the exterior of vertical building walls in desert regions: A case study in the city of Bechar, Algeria". Journal of Thermal Engineering, 3.08.2023, 308–20. http://dx.doi.org/10.18186/thermal.1448589.

Pełny tekst źródła

Streszczenie:

The use of natural-based exterior thermal insulation systems constitutes a significant challenge for achieving energy efficiency of construction. The purpose of this article is to propose new exterior thermal insulation solutions based on natural materials such as wood wool, cellulose wadding, expanded cork, hemp fiber, and sheep’s wool, in order to minimize energy consumption, address durability concerns, maintain thermal comfort, and promote the use of natural materials in thermal insulation system designs. The methodology followed consists of presenting a comparative numerical study of different exterior insulation techniques (ETI) using a dynamic thermal simulator for desert regions. The study evaluated ETI systems for vertical walls attached to a concrete block wall, including one EPS system with coating (wet process) and six systems with cladding (dry process). The results show that applying exterior insulation to walls using the two cladding systems based on hemp fiber and sheep wool resulted in a total reduction in building energy consumption of 42.21% and 42.81%, respectively. These results confirm the effectiveness of natural materials in improving the energy performance of buildings, particularly the system based on sheep wool.

Style APA, Harvard, Vancouver, ISO itp.

35

GUNGOR, Sahin, Sinan GOCMEN i Erdal CETKIN. "A review on battery thermal management strategies in lithium-ion and post-lithium batteries for electric vehicles". Journal of Thermal Engineering, 8.08.2017, 1071–92. http://dx.doi.org/10.18186/thermal.1334238.

Pełny tekst źródła

Streszczenie:

Electrification on transportation and electricity generation via renewable sources play a vital role to diminish the effects of energy usage on the environment. Transition from the conven-tional fuels to renewables for transportation and electricity generation demands the storage of electricity in great capacities with desired power densities and relatively high C-rate values. Yet, thermal and electrical characteristics vary greatly depending on the chemistry and struc-ture of battery cells. At this point, lithium-ion (Li-ion) batteries are more suitable in most applications due to their superiorities such as long lifetime, high recyclability, and capacities. However, exothermic electrochemical reactions yield temperature to increase suddenly which affects the degradation in cells, ageing, and electrochemical reaction kinetics. Therefore, strict temperature control increases battery lifetime and eliminates undesired situations such as lay-er degradation and thermal runaway. In the literature, there are many distinct battery thermal management strategies to effectively control battery cell temperatures. These strategies vary based on the geometrical form, size, capacity, and chemistry of the battery cells. Here, we focus on proposed battery thermal management strategies and current applications in the electric vehicle (EV) industry. In this review, various battery thermal management strategies are doc-umented and compared in detail with respect to geometry, thermal uniformity, coolant type and heat transfer methodology for Li-ion and post-lithium batteries.

Style APA, Harvard, Vancouver, ISO itp.

36

BULUT, Murat, i Nedim SÖZBİR. "THERMAL DESIGN, ANALYSIS AND TEST VALIDATION OF TURKSAT-3USAT SATELLITE". Journal of Thermal Engineering, 26.02.2021, 468–82. http://dx.doi.org/10.18186/thermal.887316.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Devade, Kiran. "PARAMETRIC ANALYSIS OF THERMAL PERFORMANCE OF RANQUE-HILSCH VORTEX TUBE". Journal of Thermal Engineering, 29.06.2018, 2333–54. http://dx.doi.org/10.18186/thermal.439061.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

ALJABAIR, Sattar, Israa ALESBE i Sahira Hasan IBRAHIM. "Review on latent thermal energy storage using phase change material". Journal of Thermal Engineering, 31.01.2023, 247–56. http://dx.doi.org/10.18186/thermal.1245298.

Pełny tekst źródła

Streszczenie:

One of the appealing technologies that contributes to raising the energy storage density is latent heat thermal energy storage. The heat of fusion is isothermally stored at a temperature representing the temperature at which a phase-change material transitions between phases. The current research provides a review of how phase transition materials are used in melting and solidification. Generally, the range of working temperature extends from -20 °C to 200 °C for solidification and melting applications. The first range (-20 to 5 °C) is employed for commercial and domestic refrigeration. The second range (5 to 40 °C) is utilized to lower the energy requirements for air-conditioning applications. The applications includes in third range (40 to 82 °C) are solar collector and heating of water. Applications of absorption cooling, waste electricity generations, and heat recovery are operated at high temperature range (82 to180 °C). There are various types of PCMs for all the above temperature ranges. The present review paper will discuss the application field, Geometry, PCM type, heat transfer augmentation technique and their effects on the performance. The conclusions are mentioned to give more insight about the PCM behavior in various applications.

Style APA, Harvard, Vancouver, ISO itp.

39

Rashevski, Milan, i Slavtcho Slavtchev. "Convective thermal losses of long-term underground hot water storage". Journal of Thermal Engineering, 11.04.2023, 528–40. http://dx.doi.org/10.18186/thermal.1457058.

Pełny tekst źródła

Streszczenie:

A case of underground long-term hot water storage is investigated numerically. The study is based on the unsteady two-dimensional Navier-Stokes equations in Boussinesq approximation applied to a closed cavern with time-dependent temperature boundary conditions on the walls. The problem formulated in a vorticity-stream function statement is solved by finite difference method (FDM) for high values of the Rayleigh number and for the Prandtl number of water. Streamlines, velocity and temperature fields are presented graphically for given moments of time. The evolution of the thermocline thickness in the mid-section of the cavern is slow and illustrates that the hot water zone occupies more than the half of the cavern even after 6 months period. The Nusselt number on the walls shows that the convective thermal losses are small and after certain period of time tend to decrease due to the diminished temperature difference at the walls. The influence of the fluid convection on the thermal losses is evaluated quantitatively, showing high seasonal thermal efficiency of the insulated hot water storage.

Style APA, Harvard, Vancouver, ISO itp.

40

DEVİ, Renu, Vikas POPLY i Mani MALA. "EFFECT OF ALIGNED MAGNETIC FIELD AND INCLINED OUTER VELOCITY IN CASSON FLUID FLOW OVER A STRETCHING SHEET WITH HEAT SOURCE". Journal of Thermal Engineering, 30.04.2021, 823–44. http://dx.doi.org/10.18186/thermal.930347.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

MBURU, Zachariah Mbugua, Sabyasachi MONDAL, Precious SİBANDA i Ramprakash SHARMA. "A NUMERICAL STUDY OF ENTROPY GENERATION ON OLDROYD-B NANOFLUID FLOW PAST A RIGA PLATE". Journal of Thermal Engineering, 30.04.2021, 845–66. http://dx.doi.org/10.18186/thermal.930653.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

BAMİMORE, O. T., S. o. ENİBE i Paul A. ADEDEJİ. "PARAMETRIC EFFECTS ON THE PERFORMANCE OF AN INDUSTRIAL COOLING TOWER". Journal of Thermal Engineering, 1.05.2021, 904–17. http://dx.doi.org/10.18186/thermal.930791.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

AL-MAYYAHİA, Mohammad, Mohammad FARES i Nabeel ABBOOD. "A SYSTEMATIC GRAPHICAL METHOD FOR SYNTHESIS OF HEAT EXCHANGER NETWORKS". Journal of Thermal Engineering, 30.04.2021, 890–903. http://dx.doi.org/10.18186/thermal.930713.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

PARKASH, Om, Arvind KUMAR i Basant SİKARWAR. "CFD MODELING OF SLURRY PIPELINE AT DIFFERENT PRANDTL NUMBERS". Journal of Thermal Engineering, 1.05.2021, 951–69. http://dx.doi.org/10.18186/thermal.930932.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

KAUR, Jagbir, i Suyeb KHAN. "INFLUENCE OF RELAXATION TIMES ON HEAT TRANSFER IN HUMAN HEAD EXPOSED TO MICROWAVE FREQUENCIES". Journal of Thermal Engineering, 1.05.2021, 934–50. http://dx.doi.org/10.18186/thermal.930919.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

MUSTAFA, Ali Abdulqader, Zamri NORANAİ i Ahmed Abdulnabi IMRAN. "SOLAR ABSORPTION COOLING SYSTEMS: A REVIEW". Journal of Thermal Engineering, 1.05.2021, 970–81. http://dx.doi.org/10.18186/thermal.931165.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

SHOJAEİ, Mohammad Hossein, Hamid MORTEZAPOUR, Kazem JAFARİNAEİMİ i Mohammad Mehdi MAHARLOOEİ. "AN ESTIMATION METHOD FOR GREENHOUSE TEMPERATURE UNDER THE INFLUENCE OF EVAPORATIVE COOLING SYSTEM". Journal of Thermal Engineering, 1.05.2021, 918–33. http://dx.doi.org/10.18186/thermal.930907.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

AHMADPOUR, Vahid, Sajad REZAZADEH, Iraj MİRZAEİ i A. h. MOSAFFA. "NUMERICAL INVESTIGATION OF HORIZONTAL MAGNETIC FIELD EFFECT ON THE FLOW CHARACTERISTICS OF GALLIUM FILLED IN A VERTICAL ANNULUS". Journal of Thermal Engineering, 2.05.2021, 984–99. http://dx.doi.org/10.18186/thermal.931348.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

AL-TAE’Y, Kays A., Ameer Abed JADDOA i Hussain Saad ABD. "A LOOP THERMOSYPHON FOR LIQUID COOLED MINICHANNELS HEAT SINK WITH PULSATE SURFACE HEAT FLUX". Journal of Thermal Engineering, 2.05.2021, 1030–38. http://dx.doi.org/10.18186/thermal.931389.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

AL_QASAAB, Mohammed R., Qahtan A. ABED i Wisam A. ABD AL-WAHİD. "ENHANCEMENT THE SOLAR DISTILLER WATER BY USING PARABOLIC DISH COLLECTOR WITH SINGLE SLOPE SOLAR STILL". Journal of Thermal Engineering, 2.05.2021, 1000–1015. http://dx.doi.org/10.18186/thermal.931352.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!