Gotowe bibliografie tematyczne / Thermal Expansion Coefficient

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Thermal Expansion Coefficient”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 31 stycznia 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Thermal Expansion Coefficient”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Thermal Expansion Coefficient"

1

Haverland, Gordon Wayne. "Thermal expansion coefficient". JOM 49, nr 8 (sierpień 1997): 6. http://dx.doi.org/10.1007/bf02914380.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Oku, Tatsuo, i Shinichi Baba. "Coefficient of Thermal Expansion". TANSO 2002, nr 202 (2002): 90–95. http://dx.doi.org/10.7209/tanso.2002.90.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Sugimoto, Hideki, Ken Imamura, Kazuki Sakami, Katsuhiro Inomata i Eiji Nakanishi. "Transparent Acryl‐Alumina Nano‐Hybrid Materials with Low Coefficient of Thermal Expansion". Sen'i Gakkaishi 71, nr 11 (2015): 333–38. http://dx.doi.org/10.2115/fiber.71.333.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Yang, Rui, Qing Yang i Bin Niu. "Design and study on the tailorable directional thermal expansion of dual-material planar metamaterial". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234, nr 3 (7.11.2019): 837–46. http://dx.doi.org/10.1177/0954406219884973.

Pełny tekst źródła
Streszczenie:
Current studies on tailoring the coefficient of thermal expansion of metamaterials focused on either complex bending-dominated lattice or the stretching-dominated lattice which transforms the spaces of triangle and tetrahedron. This paper proposes a kind of dual-material rectangular cell of tailorable thermal expansion, which reduces the complexities of design, calculation, and manufacture of lattice materials. The theoretical derivation using the matrix displacement method is adopted to study the thermal expansion properties of rectangular cell in the direction of height, the analytical expressions of coefficient of thermal expansion and optimization model are used to design the sizes of rectangular cell, and experimental verification is carried out. It is found that the middle cell of lattice had the same thermal expansion law as that of the unit cell. The rectangular cells of negative coefficient of thermal expansion −7 ppm/℃, zero coefficient of thermal expansion, and large positive coefficient of thermal expansion 36.2 ppm/℃ in the direction of height were realized, respectively. The consistency of theory, simulation, and experiment verifies that rectangular lattice material made of two kinds of common materials with a different coefficient of thermal expansions can achieve the design of coefficient of thermal expansion in the direction of height by choosing different material distribution and geometric parameters.
Style APA, Harvard, Vancouver, ISO itp.
5

Miyazawa, S. "Coefficient of Thermal Expansion of Concrete". Concrete Journal 56, nr 5 (2018): 368–72. http://dx.doi.org/10.3151/coj.56.5_368.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Roy, R., D. K. Agrawal i H. A. McKinstry. "Very Low Thermal Expansion Coefficient Materials". Annual Review of Materials Science 19, nr 1 (sierpień 1989): 59–81. http://dx.doi.org/10.1146/annurev.ms.19.080189.000423.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Takeda, Jun, Yukio Yasui, Hisashi Sasaki i Masatoshi Sato. "Thermal Expansion Coefficient of BaCo1-xNixS2". Journal of the Physical Society of Japan 66, nr 6 (15.06.1997): 1718–22. http://dx.doi.org/10.1143/jpsj.66.1718.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Talwar, D. N., i Joseph C. Sherbondy. "Thermal expansion coefficient of 3C–SiC". Applied Physics Letters 67, nr 22 (27.11.1995): 3301–3. http://dx.doi.org/10.1063/1.115227.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Trumper, Ricardo, i Moshe Gelbman. "Measurement of a thermal expansion coefficient". Physics Teacher 35, nr 7 (październik 1997): 437–38. http://dx.doi.org/10.1119/1.2344750.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Low, D., T. Sumii i M. Swain. "Thermal expansion coefficient of titanium casting". Journal of Oral Rehabilitation 28, nr 3 (marzec 2001): 239–42. http://dx.doi.org/10.1046/j.1365-2842.2001.00664.x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Thermal Expansion Coefficient"

1

Okada, Yoshio 1928. "The thermal expansion coefficient of polypropylene and related composites /". Thesis, McGill University, 1992. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=56778.

Pełny tekst źródła
Streszczenie:
The variability of thermal expansion coefficients during the molding of plastics causes the development of frozen thermal stresses in the molded parts. Also, the distribution of thermal expansion coefficients of the material in the molded part plays an important role in controlling shrinkage and warpage. In turn, the distribution of linear thermal expansion coefficients (LTECs) depends on the distributions of crystallinity and orientation in the part. In the case of fibre reinforced polymers, the distributions of fibre concentration and orientation are also important.
In this project, a model has been proposed for estimating the LTEC of fibre reinforced plastics as a function of crystallinity, matrix orientation, and fibre concentration and orientation. Also, extensive data have been obtained regarding the LTEC of polypropylene with and without fibre reinforcement. Extruded pellets and injection molded parts were considered. Model predictions have been compared with experimental data.
Style APA, Harvard, Vancouver, ISO itp.
2

Sakyi-bekoe, Kwame Opare Schindler Anton K. "Assessment of the coefficient of thermal expansion of Alabama concrete". Auburn, Ala, 2008. http://hdl.handle.net/10415/1435.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Kulkarni, Raghav Shrikant. "Characterization of carbon fibers: coefficient of thermal expansion and microstructure". Texas A&M University, 2004. http://hdl.handle.net/1969.1/3073.

Pełny tekst źródła
Streszczenie:
The focus of the research is to develop a consistent and repeatable method to evaluate the coefficient of thermal expansion (CTE) of carbon fibers at high temperatures. Accurate measurement of the CTE of carbon fibers is essential to understand and develop optimal processing procedures as well as computational simulations to predict properties and allowables for fiber-reinforced composites. The mismatch between the coefficient of thermal expansion of the fiber and the matrix has a profound impact on the development of residual stresses and the subsequent damage initiation and progression, potentially diminishing the performance of composite structures. In situ transmission electron microscopy (TEM) is selected to perform the experimental work on account of the high resolution and the capability of evaluating both the longitudinal and transverse CTE. The orthotropy in the CTE is tested by rotating the fibers through 45° about their axis. The method is validated by testing standard tungsten filaments of known CTE. Additionally, the microstructure of the fibers is studied in a field emission scanning electron microscope as well as through selected area diffraction patterns in a TEM to observe presence of any potential orthotropy. The pitch based P55 fiber revealed a cylindrically orthotropic microstructure, but the PAN based IM7 and T1000 fibers did not reveal any orthotropy. Finite element models of hexagonally arranged IM7 fibers in a 977 epoxy matrix are developed using PATRAN and analyzed using the commercial FEA code ABAQUS 6.4. The fiber properties were considered temperature independent where as the matrix properties were varied linearly with temperature. The lamina properties evaluated from the finite element modeling are in agreement with the experimental results in literature within 10% in the temperature range of room temperature to the stress free temperature of the epoxy, however at cryogenic temperatures the difference is greater. The residual stresses developed during processing of the composite indicated a potential location for fiber matrix debonding to be in the matrix dominant regions.
Style APA, Harvard, Vancouver, ISO itp.
4

Rassi, Erik Michael. "An inverse approach to coefficient of thermal expansion optimization in optical structures". Thesis, Montana State University, 2007. http://etd.lib.montana.edu/etd/2007/rassi/RassiE1207.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Gutierrez, Emmanuel David Mercado. "Thermal expansion coefficient for a trapped Bose gas during phase transition". Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/76/76132/tde-27102016-102903/.

Pełny tekst źródła
Streszczenie:
Ultra cold quantum gas is a convenient system to study fundamental questions of modern physics, such as phase transitions and critical phenomena. This master thesis is devoted to experimental investigation of the thermodynamics susceptibilities, such as the isothermal compressibility and the thermal expansion coefficient of a trapped Bose-Einstein condensate (BEC) of 87Rb atoms. The critical phenomena and the critical exponents across the transition can explain the behavior of the isothermal compressibility and the thermal expansion coefficient near the critical temperature TC. By employing the developed formalism of global thermodynamics variables, we carry out a statistical treatment of Bose gas in a 3D harmonic potential. After that, comparison of obtained results reveals the most appropriate state variables describing the system, namely volume and pressure parameter V and Π respectively. The both are related with the confining frequencies and BEC density distribution. We apply this approach to define the set of new thermodynamic variables of BEC, and also to construct the isobaric phase diagram V T. Its allows us to extract the compressibility κT and the thermal expansion coefficient βΠ. The behavior of the isothermal compressibility corresponds to the second-order phase transition, while the thermal expansion coefficient around the critical point behaves as β ∼ tr-α, where tr is reduced temperature of the system and α is the critical exponent on the basic of these. Results we have obtained the critical exponent α = 0.15±0.09, which allows us to determine the system dimensionality by means of the scaling theory, relating the critical exponents with the dimensionality. As a result, we found out that the dimensionality of the system to be d ∼ 3, one is in agreement with the real dimension of the system.
Amostras atômicas ultrafrias de um gás de Bose são convenientes para estudar questões fundamentais da física moderna, como as transições de fase e fenômenos críticos em condensados de Bose-Einstein (BEC). A minha dissertação dedica se à investigação das susceptibilidades termodinâmicas como a compressibilidade isotérmica e o coeficiente de expansão térmica de a traves da transição de um BEC de 87Rb. Os fenômenos críticos e os exponentes críticos a traves da transição podem explicar o comportamento da compressibilidade isotérmica e do coeficiente de expansão térmica perto da temperatura crítica TC. Ao empregar o desenvolvido formalismo das variáveis termodinâmicas globais, levamos a cabo o tratamento estatístico de um gás de Bose num potencial harmônico 3D. Depois da comparação dos resultados obtidos, revelam as mais apropriadas variáveis de estado descrevendo o sistema, chamadas parâmetro de volume e pressão, V e Π respectivamente. As duas estão relacionadas com as frequências de confinamento e a distribuição de densidade do BEC. Nós aplicamos esta abordagem para definir um conjunto de novas variáveis termodinâmicas do BEC, e também para construir o diagrama de fase isobárico V T. O anterior nós permite extrair a compressibilidade κT e o coeficiente de expansão termina βΠ. O comportamento da compressibilidade isotérmica corresponde a uma transição de fase de segunda ordem enquanto que o coeficiente de expansão térmica ao redor do ponto crítico comporta se como β ∼ tr-α, onde tr é a temperatura reduzida do sistema, e α o exponente crítico. Deste resultado nós obtemos um exponente critico, α = 0.15 ± 0.09, que permite determinar a dimensionalidade do sistema a traves da teoria de escala, relacionando os exponentes críticos com a dimensionalidade. Como resultado, encontramos que a dimensionalidade do sistema é d ∼ 3 que está de acordo como a dimensão real do sistema.
Style APA, Harvard, Vancouver, ISO itp.
6

Hacker, Paul John. "A study of the coefficient of thermal expansion of nuclear graphites". Thesis, University of Bath, 2001. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341579.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Maravola, Michael. "Low Coefficient of Thermal Expansion Composite Tooling Manufactured via Additive Manufacturing Technologies". Youngstown State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ysu154704993501967.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

PRISCO, LUCIANA PRATES. "SYNTHESIS OF AL2MO3O12 NANOMETRIC POWDERS FOR OPTIMIZATION OF BULK COEFFICIENT OF THERMAL EXPANSION". PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2012. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=21439@1.

Pełny tekst źródła
Streszczenie:
PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
A síntese de pós nanométricos do Al2Mo3O12 para otimização de seu coeficiente de expansão térmica na forma maciça tem como objetivo principal aproximar o comportamento térmico intrínseco e extrínseco do material. A expansão térmica intrinseca de escala atomica é medida por difração de raios-X a partir do aumento dos parametros de rede, por outro lado, a tecnica de dilatometria mede ambos os efeitos tanto intrinsecos quanto extrinsecos provenientes da microestrutura. Materiais anisotropicos apresentam coeficientes de expansão termica diferentes ao longo dos eixos cristalograficos, e com isso são encontradas maiores diferenças entre as propriedades intrinseca e maciça da expansão termica. Dessa forma a aplicação desses materias anisotropicos na forma maciça é comprometida devido a formação de microtrincas. O Al2Mo3O12 foi obtido na forma nanometrica pela síntese por coprecipitação e na forma micrométrica pela síntese de sol-gel assistido com álcool polivinilico e por reação em estado solido. Dessa forma o resultado de CET maciço obtidos pelos três métodos foram comparados entre si e também comparados aos existentes na literatura para comportamento intrínseco e maciço. Os resultados mostraram que o Al2Mo3O12 na forma nanometrica possui resultado de CET maciço muito próximo ao intrínseco, diferente do obtido para o micrométrico e também do já reportado na literatura,o que confirma que a partir de um tamanho de cristal critico não seria mais possível obter um mesmo CET intrínseco e maciço para um mesmo material.
Optimization of the bulk thermal expansion coefficient of the Al2Mo3O12 using nanometric powder in order to approximate the intrinc and the extrinsic thermal properties.When a solid body is exposed to temperature variation, a change of dimensions will occur due to emergence of different effects originating at atomic (intrinsic) or microstructural (extrinsic) scales. The intrinsic thermal expansion is measured by X-ray diffraction from lattice parameters increase, on the other hand, the technique of dilatometric measures both the intrinsic as both extrinsic effects may then be defined as their CTE solid (bulk). Cubic materials exhibit isotropic behavior during thermal expansion, and thus may be insignificant variations between intrinsic and CTE s massive. Anisotropic materials have different coefficients of thermal expansion along the crystallographic axes, and presents major differences between the intrinsic properties and thermal expansion of the bulk, being mostly a bulk CTE smaller than the intrinsic one. The application of these anisotropic materials is difficult because bulk CTE massive changes expected due to formation of microcracks. The Al2Mo3O12 was obtained by three routes :coprecipitation (nanometric way) , sol-gel assisted with polyvinyl alcohol (PVA) and by solid state reaction (micrometric ways). Thus the result of bulk CET obtained by the three methods were compared and also compared with those found in the literature for intrinsic behavior and bulk. The nanometric Al2Mo3O12 showed a bulk linear CTE close to the intrinsic value, whereas micrometric one showed a negative bulk CTE ,which confirms that from a critical cristal size it is no possible to obtain bulk CTE close to the intrinsic one.
Style APA, Harvard, Vancouver, ISO itp.
9

Archer, Robert Joseph 1957. "Effects of spacial variation of the thermal coefficient of expansion on optical surfaces". Thesis, The University of Arizona, 1988. http://hdl.handle.net/10150/276887.

Pełny tekst źródła
Streszczenie:
The deformation of a mirror's optical surface due to a spacial variation of the coefficient of thermal expansion is examined. Four types of variations of the coefficient of thermal expansion are studied. These represent variations which result after typical manufacturing and/or fabrication processes. Equations describing the deformations resulting from the variations in the coefficient of thermal expansion are derived for some of the cases. Deformations due to more complex variations in the coefficient of thermal expansion are developed empirically using data generated by the finite-element method.
Style APA, Harvard, Vancouver, ISO itp.
10

Neekhra, Siddharth. "A new mineralogical approach to predict coefficient of thermal expansion of aggregate and concrete". Texas A&M University, 2004. http://hdl.handle.net/1969.1/1461.

Pełny tekst źródła
Streszczenie:
A new mineralogical approach is introduced to predict aggregate and concrete coefficient of thermal expansion (CoTE). Basically, a modeling approach is suggested based on the assumption that the CoTE of aggregate and concrete can be predicted from the CoTE of their constituent components. Volume percentage, CoTE and elastic modulus of each constituent mineral phase are considered as input for the aggregate CoTE model, whereas the same properties for coarse aggregate and mortar are considered for the concrete CoTE model. Methods have been formulated to calculate the mineral volume percentage from bulk chemical analysis for different type of rocks commonly used as aggregates in Texas. The dilatometer testing method has been established to measure the CoTE of aggregate, pure minerals, and concrete. Calculated aggregate CoTE, based on the determined CoTE of pure minerals and their respective calculated volume percentages, shows a good resemblance with the measured aggregate CoTE by dilatometer. Similarly, predicted concrete CoTE, based on the calculated CoTE of aggregate and mortar and their respective volume percentages compares well with the measured concrete CoTE by dilatometer. Such a favorable comparison between predicted and measured CoTE provided a basis to establish the composite model to predict aggregate and concrete CoTE. Composite modeling will be useful to serve as a check of aggregate source variability in terms of quality control measures and improved design and quality control measures of concrete.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Thermal Expansion Coefficient"

1

C, Maciag, i United States. National Aeronautics and Space Administration., red. The effect of bromination of carbon fibers on the coefficient of thermal expansion of graphite fiber-epoxy composites. [Washington, D.C.]: National Aeronautics and Space Administration, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

A, Fellenstein J., i United States. National Aeronautics and Space Administration., red. The effect of compositional tailoring on the thermal expansion and tribological properties of PS300: A solid lubricant composite coating. [Washington, D.C: National Aeronautics and Space Administration, 1996.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Center, Lewis Research, i United States. National Aeronautics and Space Administration., red. Micromechanical prediction of the effective coefficients of thermo-piezoelectric multiphase composites. [Cleveland, Ohio]: National Aeronautics and Space Administration, Lewis Research Center, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Thermal Expansion Coefficient"

1

Gooch, Jan W. "Thermal-Expansion Coefficient". W Encyclopedic Dictionary of Polymers, 742. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11748.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Meyer, B. K. "ZnO: thermal expansion coefficient". W New Data and Updates for IV-IV, III-V, II-VI and I-VII Compounds, their Mixed Crystals and Diluted Magnetic Semiconductors, 620. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-14148-5_343.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Gooch, Jan W. "Coefficient of Thermal Expansion". W Encyclopedic Dictionary of Polymers, 151. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_2539.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

da Silva, E. C. F. "GaSb: linear thermal expansion coefficient". W Landolt-Börnstein - Group III Condensed Matter, 180. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-23415-6_103.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Gooch, Jan W. "Volume Coefficient of Thermal Expansion". W Encyclopedic Dictionary of Polymers, 801. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_12643.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Hönerlage, B. "CuCl, gamma modification: thermal expansion coefficient". W New Data and Updates for I-VII, III-V, III-VI and IV-VI Compounds, 132. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-48529-2_39.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Fernandes da Silva, E. C. "AlGaxAs1–x: linear thermal expansion coefficient". W New Data and Updates for III-V, II-VI and I-VII Compounds, 61. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-92140-0_49.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Strauch, D. "BN: equation of state, thermal expansion coefficient". W New Data and Updates for IV-IV, III-V, II-VI and I-VII Compounds, their Mixed Crystals and Diluted Magnetic Semiconductors, 245–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-14148-5_133.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Herwig, Heinz. "Thermischer Ausdehnungskoeffizient β* (thermal expansion coefficient β*)". W Wärmeübertragung A-Z, 255–57. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-642-56940-1_57.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Wiff, J. P., Y. Kinemuchi, S. Naito, A. Uozumi i K. Watari. "Thermal Expansion Coefficient of SiO2-Added Leucite Ceramics". W Mechanical Properties and Performance of Engineering Ceramics and Composites IV, 241–48. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470584262.ch23.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Thermal Expansion Coefficient"

1

Poplavko, Y. M., Y. V. Didenko i Y. I. Yakimenko. "Negative Thermal Expansion Coefficient". W 2019 IEEE 2nd Ukraine Conference on Electrical and Computer Engineering (UKRCON). IEEE, 2019. http://dx.doi.org/10.1109/ukrcon.2019.8879790.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Madenci, Erdogan, Atila Barut i Mehmet Dorduncu. "Peridynamics for Predicting Thermal Expansion Coefficient of Graphene". W 2019 IEEE 69th Electronic Components and Technology Conference (ECTC). IEEE, 2019. http://dx.doi.org/10.1109/ectc.2019.00130.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Pomp, Norbert, i Pavel Kloucek. "Longer Parts Coefficient of Thermal Expansion Measurement Method". W 2021 13th International Conference on Measurement. IEEE, 2021. http://dx.doi.org/10.23919/measurement52780.2021.9446836.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Kondo, Kazuo, Shingo Mukahara, Jin Onuki, Taro Hayashi i Masayuki Yokoi. "Reduction of thermal expansion coefficient of electrodeposited copper". W 2015 IEEE 65th Electronic Components and Technology Conference (ECTC). IEEE, 2015. http://dx.doi.org/10.1109/ectc.2015.7159660.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

OLIVIERI, E., E. PASCA, G. VENTURA, M. BARUCCI i L. RISEGARI. "THERMAL EXPANSION COEFFICIENT OF COLD-PRESSED SILICON CARBIDE". W Proceedings of the 8th Conference. WORLD SCIENTIFIC, 2004. http://dx.doi.org/10.1142/9789812702708_0087.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Podrażka, Jacek, Paweł Bogusz i Wiesław Barnat. "Thermal expansion coefficient influence on FML material deformation under thermal load". W COMPUTATIONAL TECHNOLOGIES IN ENGINEERING (TKI’2018): Proceedings of the 15th Conference on Computational Technologies in Engineering. Author(s), 2019. http://dx.doi.org/10.1063/1.5092097.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Xie, Yan, Dengfeng Lu i Jingjun Yu. "Bimaterial Micro-Structured Annulus With Zero Thermal Expansion Coefficient". W ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-68142.

Pełny tekst źródła
Streszczenie:
This paper mainly concentrates on the design and analysis of the annulus with zero thermal expansion coefficient (ZTE) aiming to solve the heat generation and deformation in high speed bearing. First, a fork-like lattice cell inspired by the basic triangular cell is put forward and further applied to construct an annulus. The stretch-dominated lattice cell utilizes the Poisson’s contraction effect to achieve the tailorable thermal expansion coefficient (CTE). The thermal behaviors differences between the continuous interfaces and lattice cells will lead to the internal stress. Thus, the CTE of the annulus consisting of the lattice cell can be tailored to zero even negative values through the offset between the thermal-strain and force-strain. Then a theoretical model is established with some appropriate assumptions to reveal the quantitative relations among the geometrical parameters, material properties and equivalent CTEs thoroughly. The prerequisites for realizing a zero CTE are further derived in terms of material limitations and geometric constraints. Finally, FEA method is implemented to verify and analyze the thermal behaviors of annulus. The proposed annulus design characterized by the CTE tunability, structure efficiency and continuous interfaces is hopefully to be applied in the high speed bearings, adapters between the shaft and collar and fastener screws.
Style APA, Harvard, Vancouver, ISO itp.
8

Mwanang'onze, Hanakumbo, Ian D. Moore i Mark Green. "Coefficient of Thermal Expansion Characterization for Plain Polyethylene Pipe". W Pipeline Engineering and Construction International Conference 2003. Reston, VA: American Society of Civil Engineers, 2003. http://dx.doi.org/10.1061/40690(2003)142.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Beghini, M., L. Bertini i F. Frendo. "Thermal Expansion of Thermally Sprayed Coatings". W ITSC 1998, redaktor Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p1595.

Pełny tekst źródła
Streszczenie:
Abstract The coefficient of thermal expansion (CTE) of a NiCoCrAlY coating was investigated in this work. The CTE was inferred from the measured length variations of coated prismatic symmetric specimens (i.e. having the coating on two opposite surfaces) at various temperature increments. The elongation of the specimen was evaluated from the relative positions of two markers, which was recorded during the test by a CCD video camera; analysis with subpixeling technique allowed high resolution in the dilatation measurements. Analytical relationships used to determine the coating's CTE were based on the simple multilayer beam model; the temperature dependent elastic moduli of the layers had been determined by four point bend test in a previous work. Coated specimens were employed having different substrate thicknesses in order to check the accuracy of measurements.
Style APA, Harvard, Vancouver, ISO itp.
10

Badami, Vivek G., i Michael Linder. "Ultrahigh-accuracy measurement of the coefficient of thermal expansion for ultralow-expansion materials". W SPIE's 27th Annual International Symposium on Microlithography, redaktor Roxann L. Engelstad. SPIE, 2002. http://dx.doi.org/10.1117/12.472323.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Thermal Expansion Coefficient"

1

Thompson, Darla Graff, i Racci DeLuca. Coefficient of Thermal Expansion of Pressed PETN Pellets. Office of Scientific and Technical Information (OSTI), marzec 2015. http://dx.doi.org/10.2172/1172824.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Thompson, Darla Graff, Caitlin Savanna Woznick i Racci DeLuca. The Volumetric Coefficient of Thermal Expansion of PBX 9502. Office of Scientific and Technical Information (OSTI), marzec 2018. http://dx.doi.org/10.2172/1425787.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Carter, Austin D., i S. Elhadj. Modulus of Elasticity and Thermal Expansion Coefficient of ITO Film. Office of Scientific and Technical Information (OSTI), czerwiec 2016. http://dx.doi.org/10.2172/1325877.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Casias, Zachary. High Throughput Coefficient Thermal Expansion Testing Utilizing Digital Image Correlation. Office of Scientific and Technical Information (OSTI), listopad 2022. http://dx.doi.org/10.2172/1898723.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Duvall, Donovan S., Michael D. Hale, Donald J. Lewis i Arthur D. Snyder. Determination of the Coefficient of Thermal Expansion of JP-4 Fuels. Fort Belvoir, VA: Defense Technical Information Center, grudzień 1985. http://dx.doi.org/10.21236/ada171495.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Perham, T. Joining of silicon carbide using interlayer with matching coefficient of thermal expansion. Office of Scientific and Technical Information (OSTI), listopad 1996. http://dx.doi.org/10.2172/432941.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Bishop, Sean, Daniel Lowry, Amanda Peretti, Mia Blea-Kirby, Perla Salinas, Eric Coker, Edward Arata i in. Processing, structure, and thermal properties of ZrW2O8, HfW2O8, HfMgW3O12, Al(HfMg)0.5W3O12, and Al0.5Sc1.5W3O12 negative and zero thermal expansion coefficient ceramics. Office of Scientific and Technical Information (OSTI), wrzesień 2022. http://dx.doi.org/10.2172/1890063.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

DeSmith, Matthew. Changes to the morphology and coefficient of thermal expansion in HDPE and UHMWPE following irradiation-based crosslinking. Office of Scientific and Technical Information (OSTI), wrzesień 2022. http://dx.doi.org/10.2172/1887095.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

C.B. Skidmore, T.A. Butler i C.W. Sandoval. The Elusive Coefficients of Thermal Expansion in PBX 9502. Office of Scientific and Technical Information (OSTI), maj 2003. http://dx.doi.org/10.2172/809945.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Feng, W., i T. Hoheisel. Coefficients of thermal expansion for a carbon-carbon composite. Office of Scientific and Technical Information (OSTI), listopad 1989. http://dx.doi.org/10.2172/5244635.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Thermal Expansion Coefficient” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii