Gotowe bibliografie tematyczne / Test5

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Test5”

Autor: Grafiati

Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Test5”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Test5"

Derks, G., A. Doelman, S. A. van Gils i H. Susanto. "Stability Analysis of π-Kinks in a 0-π Josephson Junction". SIAM Journal on Imaging Sciences 1, nr 1 (2008): 99. http://dx.doi.org/10.1137/test5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Fowo, Yohanes Kristono, Josina Irene Brigetha Hutubessy i Elisebet Ndae. "RESPON TANAMAN JAGUNG PULUT (Zea mays ceratina Kulesh) AKIBAT BERBAGAI DOSIS PUPUK NPK PHONSKA DAN JARAK TANAM ANTAR BARIS". AGRICA 15, nr 2 (3.01.2023): 122–32. http://dx.doi.org/10.37478/agr.v15i2.2311.

Pełny tekst źródła

Streszczenie:

Waxi corn, which is included in the cereal plant group, is a food source for meeting the needs of life and has an important role in fulfilling community nutrition. Efforts to increase production that include quantity and quality can be made by applying NPK phonska fertilizer and spacing out planters to minimize the occurrence of competition. The study was to obtain the interaction caused by various doses of NPK phonska dose with different spacings on maize plants and to obtain the optimum dose of NPK phonska and ideal spacing to produce the optimum pulut maize plant. Using a factorial randomized block study design (RAKF)consisting of two treatment factors, each combination was repeated 3 times. Phoska NPK treatment consists of three levels (P1:50; P2:100 and P3:150)kg/ha, While the spacing treatment includes (J1: 50x 40; J2: 60x40 and J3: 70x40) cm. Data is collected non-descriptively. level F test5% to go to treatment. The interaction effect is based on Duncan's 5% test and LSD 5% test for a single treatment difference phonska test on the variable length of cropping cobs and yield hectare with a percentage increase of 15,19% and 28,33% respectively, the single treatment of plant spacing had a significant effect on the variable cob weight cropping weights 33,73%.

Style APA, Harvard, Vancouver, ISO itp.

Salas, Julián, María Jesús Guinea i Juan Diego Bernal. "Análisis de resultados de ensayos de resistencia de probetas de tierra". Materiales de Construcción 38, nr 210 (30.06.1988): 25–38. http://dx.doi.org/10.3989/mc.1988.v38.i210.836.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yushchenko, K. A., E. A. Velikoivanenko, N. O. Chervyakov, G. F. Rozynka i N. I. Pivtorak. "Finite-element modelling of stress-strain state in weldability tests (PVR-TEST)". Paton Welding Journal 2016, nr 12 (28.12.2016): 9–12. http://dx.doi.org/10.15407/tpwj2016.12.02.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhang, J., i S. Mednick. "0094 The Effect of Zolpidem on Sleep-Dependent Declarative Memory Consolidation". Sleep 43, Supplement_1 (kwiecień 2020): A38. http://dx.doi.org/10.1093/sleep/zsaa056.092.

Pełny tekst źródła

Streszczenie:

Abstract Introduction Sleep plays a critical role in memory consolidation. At the same time, about 20% of population in the U.S. suffer from sleep disorders or deprivation, and about 16% of them reported using sleep aids (CDC, 2015). However, the effect of sleep aids on sleep-dependent memory consolidation remains unclear. Previous studies have observed an improvement in sleep-dependent declarative memory consolidation with zolpidem over a daytime nap (Mednick et al., 2013). The current study investigates the effect of zolpidem on declarative memory consolidation over a night of sleep and over 24 hours. Methods This study employed a double-blind, placebo-controlled, within-subject design, in which every subject (N=26, 12 females) experienced both zolpidem and placebo. All subjects were healthy, college-aged adults without sleep disorder. A 32-channel electroencephalogram cap was used to record brain activity during sleep. Word paired-associates task was used to evaluate memory performance. Participants reported to the laboratory in the evening, performed word paired-associates task (test1), then ingested either zolpidem or placebo before sleep. They were tested on the task in the following morning (test2) as well as in the following evening (test3). Paired-sample t-tests for retrieval difference scores between placebo and zolpidem conditions were conducted. Results Participants showed similar baseline performance on the word paired-associates task (test 1, p=0.45). Zolpidem condition showed higher memory retention compared to placebo 24hr after drug ingestion (test3-test1, t₂ 5=2.09, p<0.05). The improvement in performance for zolpidem condition occurred across the following day (test3-test2, t₂ 5=2.22, p<0.05), as no difference was observed between conditions after sleep (test2-test1, t₂ 5=0.34, p=0.74) Conclusion Consistent with previous studies, participants showed better memory performance after taking zolpidem compared to placebo. However, the current study showed that the improvement in memory occurred across a day of wakefulness after nighttime drug ingestion, while other studies observed improvements shortly after sleep, indicating a potential delayed benefit of zolpidem on memory consolidation. Support This work was supported by the Office of Naval Research grant N00014-14-1-0513

Style APA, Harvard, Vancouver, ISO itp.

Stecka, Mariola, i Hanna Karakuła-Juchnowicz. "Polish Adult Reading Test – PART – construction of polish test for estimation the level of premorbid intelligence in schizophrenia". Psychiatria Polska 51, nr 4 (29.08.2017): 673–85. http://dx.doi.org/10.12740/pp/onlinefirst/63207.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Richardson, Ken. "What IQ Tests Test". Theory & Psychology 12, nr 3 (czerwiec 2002): 283–314. http://dx.doi.org/10.1177/0959354302012003012.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Behrend, Christian. "Tests im Test: Depressionsscreenings". Im Focus Onkologie 21, nr 7-8 (lipiec 2018): 70. http://dx.doi.org/10.1007/s15015-018-4110-z.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Koscher, Chuck. "Article Apr 10, 2007 09:01". Test Publication 33, nr 1 (9.05.1995): 57–200. http://dx.doi.org/10.50505/test_.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Xu, Jian, Kwok-Wai Chung i Chuen-Lit Chan. "An Efficient Method for Studying Weak Resonant Double Hopf Bifurcation in Nonlinear Systems with Delayed Feedbacks". SIAM Journal on Imaging Sciences 1, nr 1 (2008): 29. http://dx.doi.org/10.1137/test2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Test5"

Šotolová, Ludmila. "Ekotoxikologické hodnocení vybraných monomerů pomocí testů toxicity". Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2008. http://www.nusl.cz/ntk/nusl-216368.

Pełny tekst źródła

Streszczenie:

Environmental effects of selected monomers, eventually aditives of polymers, will be evaluated by ecotoxicity tests. For this purpose two alternative tests of toxicity: Thamnotoxkit F TM on testing organism Thamnocephalus platyurus and Daphnotoxkit F TM on testing organism Daphnia magna will be used. Two phytotoxicity tests will be also used: Sinapis alba root growth inhibition toxicity test and Allium cepa L root growth inhibition toxicity test. Obtained results enable calculation of value LC50, EC50 and IC50 for tested substances.

Style APA, Harvard, Vancouver, ISO itp.

Jankowski, Jamie H. "Test anxiety and standardized intelligence tests". Online version, 1998. http://www.uwstout.edu/lib/thesis/1998/1998jankowskij.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Jonas, Katherine Grace. "Potential test information for multidimensional tests". Diss., University of Iowa, 2017. https://ir.uiowa.edu/etd/5787.

Pełny tekst źródła

Streszczenie:

Test selection in psychological assessment is guided, both explicitly and implicitly, by how informative tests are with regard to a trait of interest. Most existing formulations of test information are sensitive to subpopulation variation, with the result that test information will vary from sample to sample. Recently, measures of test information have been developed that quantify the potential informativeness of the test. These indices are defined by the properties of the test, as distinct from the properties of the sample or examinee. As of yet, however, measures of potential information have been developed only for unidimensional tests. In practice, psychological tests are often multidimensional. Furthermore, multidimensional tests are often used to estimate one specific trait among many. This study develops measures of potential test information for multidimensional tests, as well as measures of marginal potential test information---test information with regard to one trait within a multidimensional test. In Study 1, the performance of the metrics was tested in data simulated from unidimensional, first-order multidimensional, second-order, and bifactor models. In Study 2, measures of marginal and multidimensional potential test information are applied to a set of neuropsychological data collected as part of Rush University's Memory and Aging Project. In simulated data, marginal and multidimensional potential test information were sensitive to the changing dimensionality of the test. In observed neuropsychological data, five traits were identified. Verbal abilities were most closely correlated with probable dementia. Both indices of marginal potential test information identify the Mini Mental Status Exam as the best measure of that trait. More broadly, greater marginal potential test information calculated with regard to verbal abilities was associated with greater criterion validity. These measures allow for the direct comparison of two multidimensional tests that assess the same trait, facilitating test selection and improving the precision and validity of psychological assessment.

Style APA, Harvard, Vancouver, ISO itp.

Glasser, David Samuel. "Test factoring with amock: generating readable unit tests from system tests". Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/45982.

Pełny tekst źródła

Streszczenie:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2007.
Includes bibliographical references (p. 95-98).
Automated unit tests are essential for the construction of reliable software, but writing them can be tedious. If the goal of test generation is to create a lasting unit test suite (and not just to optimize execution of system tests), it is essential that generated tests can be understood by the developers that will be running them, so that they can tell the difference between real and spurious failures. amock is a system which automatically generates human-readable JUnit regression tests that use mock objects to simulate the behavior of individual objects dynamically observed during a system test execution.
by David Samuel Glasser.
M.Eng.

Style APA, Harvard, Vancouver, ISO itp.

Moreira, Patrícia Sandei Galvão [UNESP]. "Comportamento da função cardiorrespiratória e muscular de pacientes com câncer submetidos à cirurgia abdominal oncológica". Universidade Estadual Paulista (UNESP), 2018. http://hdl.handle.net/11449/153168.

Pełny tekst źródła

Streszczenie:

Submitted by PATRÍCIA SANDEI GALVÃO MOREIRA null (patriiciia.sandei@gmail.com) on 2018-03-21T12:24:18Z No. of bitstreams: 1 Mestrado Final para Biblio 2603.pdf: 861323 bytes, checksum: dd1d75db77b9b44bc3d840bd894d4ed7 (MD5)
Approved for entry into archive by Adriana Aparecida Puerta null (dripuerta@rc.unesp.br) on 2018-03-22T19:47:40Z (GMT) No. of bitstreams: 1 moreira_psg_me_rcla.pdf: 784052 bytes, checksum: 2b209d1f15333e1a97529b0f9690df95 (MD5)
Made available in DSpace on 2018-03-22T19:47:40Z (GMT). No. of bitstreams: 1 moreira_psg_me_rcla.pdf: 784052 bytes, checksum: 2b209d1f15333e1a97529b0f9690df95 (MD5) Previous issue date: 2018-02-26
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Os pacientes com câncer podem apresentar sintomas pulmonares incapacitantes como dispneia, fadiga e intolerância ao exercício. Considerando que um dos principais tratamentos para essa patologia é a cirurgia, os profissionais devem atentar-se às complicações pós-operatórias (CPO) que estão presentes principalmente nas cirurgias abdominais e torácicas, já que interferem na função muscular e na mecânica respiratória. OBJETIVO: Analisar se a doença oncológica leva a alterações na função cardiorrespiratórias e musculares, avaliar o comportamento da função cardiorrespiratória e da força muscular de pacientes oncológicos submetidos à cirurgia abdominal aberta e identificar os fatores pré-operatórios que podem diferenciar as CPO em pacientes oncológicos submetidos a cirurgia abdominal aberta. METODOLOGIA: Os pacientes foram divididos em dois grupos: grupo experimental (GE) composto por pacientes com diagnóstico de câncer abdominal e grupo controle (GC) com pacientes saudáveis. Na avaliação passaram por anamnese, testes de esforço, teste da função e força pulmonar e teste de força de preensão manual. Considerou-se estatisticamente significante p<0,05. RESULTADOS: Foram avaliados 33 pacientes (19 mulheres) em cada grupo. Quando comparado os pacientes do GC e do GE, observou-se diferença estatística na PImax (%) e na distância percorrida no ISWT (%). Os pacientes que não complicaram no quinto dia de pós-operatório (PO5) ou no trigésimo dia de pós-operatório (PO30) tiveram as variáveis pré-operatórias (PRÉ) comparadas com PO5 ou PO30, respectivamente. Na primeira situação, observou-se que houve diferença estatística em CVF, VEF1, PEF, FEF25-75%, valores reais e (%), VEF1/CVF (%), PImax em valor real e PEmax e ISWT reais e em (%). Já os momentos PRÉ e PO30 sem CPO a diferença foi observada nas variáveis: distância do ISWT real e (%). Quando comparados todos os momentos de pacientes que não complicaram a diferença foi significante em CVF e VEF1 (%), PEF real e distância do ISWT real e (%). E por último foi comparado os momentos PRÉ dos pacientes que não tiveram CPO no PO5 com o PRÉ dos pacientes que tiveram CPO no PO5 e o momento PRÉ dos pacientes sem CPO no PO30 com o momento PRÉ dos pacientes com CPO no PO30. Na primeira situação observou-se diferença estatística em FEF25-75%, real e na distância do ISWT real e (%). Já na segunda situação foi observada diferença estatística em CVF, PFE e FEF25-75% reais e em VEF1 e ISWT reais e (%). CONCLUSÃO: Podemos concluir que a doença oncológica abdominal, assim como a cirurgia abdominal, levam a alterações funcionais cardiorrespiratórias e musculares. E que as variáveis espirométricas, o teste de esforço e a frequência cardíaca foram capazes de diferenciar pacientes que não complicam daqueles que complicam.
Cancer patients may present some disabling pulmonary symptoms such as dyspnea, fatigue and exercise intolerance. Considering that surgery is one of the main treatments for this pathology, professionals should pay attention to postoperative complications (POC) which are present mainly in abdominal and thoracic surgeries, since they interfere in muscle function and respiratory mechanics. OBJECTIVE: To analyze whether oncological disease leads to cardiorespiratory and muscular function disturbance, to evaluate the behavior of cardiorespiratory function and muscular strength in cancer patients submitted to open abdominal surgery and to identify preoperative factors that may differentiate PCO in oncological patients submitted open abdominal surgery. METHODOLOGY: Patients were divided into two groups: experimental group (EG) composed of patients with abdominal cancer and control group (CG) with healthy patients. The evaluation submitted both groups to anamnesis, stress tests, function test and pulmonary force and manual grip strength test. A value for p <0.05 was considered statistically significant. RESULTS: Thirty-three patients (19 women) were evaluated in each group. When comparing CG and EG patients, a statistical difference was observed in the MIP (%) and the distance covered in the ISWT (%). Patients who did not complicate on the fifth postoperative day (PO5) or on the 30th postoperative day (PO30) had the preoperative variables (PRÉ) compared to PO5 or PO30, respectively. In the first situation, it was observed that there was a statistical difference in FVC, FEV1, PEF, FEF(25-75%), real values and (%), FEV1/FVC (%), real MIP and real and (%) MEP, ISWT. In PRE and PO30 moments without PCO, the difference was observed in the variables: distance from the real ISWT and (%). When comparing all the moments of patients who did not complicate the difference was significant in FVC and FEV1 (%), real PEF and ISWT real and (%) distance. Finally, we compared the PRE moments of the patients who did not have POC in the PO5 with the PRE of the patients who had POC in the PO5 and the PRE moments of the patients without POC in the PO30 with the PRÉ moment of the patients with POC in the PO30. In the first situation, we observed a statistical difference in FEF(25-75%), real and in the distance of the real and (%) ISWT. In the second situation, a statistical difference was observed in real FVC, PEF and FEF(25-75%), and in FEV1 and ISWT real and (%). CONCLUSION: We can conclude that abdominal cancer, as well as abdominal surgery, lead to cardiorespiratory and muscular functional changes. And that the spirometric variables, the stress test and the heart rate were able to differentiate patients that do not complicate to those that complicate.

Style APA, Harvard, Vancouver, ISO itp.

Milatová, Martina. "Ekotoxikologické hodnocení polymerních substancí". Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2013. http://www.nusl.cz/ntk/nusl-216922.

Pełny tekst źródła

Streszczenie:

Polymers or their modifiers may become parts of a wide range of products. After the end of life cycle useful parts of the products are recycled but significant parts still become household waste. It´s therefore desirable not only by law on chemicals and chemical products, but also according to the requirements of European directive REACH, to assess the impact not only chemical but also the additives of all products or products themselves in terms of their impact on the environment. For these purposes it serves ecotoxicity tests, which allow prediction of the influence test compounds in the environment. In this diploma thesis were evaluated polypropylene modifiers, which are commercially produced. Use of ecotoxicity tests were evaluated maleic anhydride and itaconic anhydride effects on the environment. Alternative tests have been used for toxicity and namely Thamnotoxkit FTM the organism Thamnocephalus platyurus and Daphnotokit FTM the organism Daphnia magna. The phytotoxicity test groups were selected toxicity tests: Sinapis alba root growth inhibition toxicity test, Allium cepa L root growth inhibition toxicity test and Semi-chronic toxicity test on Lemna minor L. From marine toxicity tests was performed Acute inhibition test of brine shrimps Artemia salina.

Style APA, Harvard, Vancouver, ISO itp.

Turlapati, Radhika. "Leveraging test measurements into proposing additional domain tests". [Johnson City, Tenn. : East Tennessee State University], 2001. http://etd-submit.etsu.edu/etd/theses/available/etd-0404101-011957/unrestricted/TurlapatiR0430.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gurgždys, Viktoras. "Vienetų testų generavimas, remiantis testų duomenų baze". Master's thesis, Lithuanian Academic Libraries Network (LABT), 2009. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2009~D_20090824_150952-75688.

Pełny tekst źródła

Streszczenie:

Programinės įrangos testavimas yra kritinė viso kūrimo proceso dalis. Kokybe privalo rūpintis ne vien testuotojai. Programuotojai turi naudoti įvairias kokybės užtikrinimo technikas, tokias kaip statinė kodo analizė (kodo peržiūra) ir vienetų testavimas. Kartais programuotojai praleidžia kodo testavimą arba atlieka tik paviršutinį testavimą, nes tai užimą jų laiką. Automatiniai testavimo įrankiai suteikia galimybes testavimo kaštų sumažinimui. Sukurta daug įvairių testavimo atvejų generavimo technikų naudojant specializuotus įrankius. Testavimo atvejų generavimo tikslas yra pasiekti kuo didesnį kodo padengimą ir rasti netikėtas klaidas. Daugumoje atvejų yra neįmanoma pasiekti visišką kodo padengimą, naudojant vien generuotus testavimo atvejus. Reikalingi testavimo atvejai, parašyti žmogaus. Logiška pakartotinai naudoti testus, kuriais buvo ištestuoti panašūs metodai anksčiau. Šiame darbe analizuojama testų pakartotino panaudojimo problema. Siūlomas sprendimas yra paremtas vienetų testų saugojimu ir pakartotinu panaudojimu lyginant testuojamą metodą ir jau ištestuotą, kuris turi išsaugotus vienetų testus. Siūlomas metodas turėtų būti naudojamas kartu su vienetų testų generavimo įrankiais.
Software testing is critical part in software development. Not only testers are responsible for software quality. Programmers should use quality assurance techniques as code static analysis (code review) and unit testing. Sometimes developers omit testing their code or perform just superficial testing because unit testing consumes development time. Automated unit testing tools provide the way for reducing of testing costs. There are various techniques for generating test cases by using specialized tools. The goal of generation of tests cases is to achieve higher code coverage and expose unexpected errors. In many cases it is impossible to achieve full code coverage by using only generated test cases. Then manual efforts are needed. It is reasonable to reuse unit tests for method similar to that already tested. This work helps to analyse unit test reusability problem. The approach presented is based on unit test storing and reusing by comparing current testing method and method that has saved tests. This method should be used in combination with particular unit test generation tool.

Style APA, Harvard, Vancouver, ISO itp.

Santos, Jonatas Ferreira da Silva. "Validade, reprodutibilidade, sensibilidade e construção de tabela normativa do frequency speed of kick test para o taekwondo". Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/39/39135/tde-19062018-092046/.

Pełny tekst źródła

Streszczenie:

O objetivo do presente estudo foi estabelecer os critérios de autenticidade científica de validade, reprodutibilidade e a sensibilidade do FSKT10s e do FSKTmult para o taekwondo. O objetivo secundário foi construir uma tabela normativa para classificação do desempenho físico gerado no FSKT. O estudo foi conduzido em seis etapas, contendo amostras de praticantes ou atletas de diferentes níveis competitivos. Visando investigar a validade lógica do FSKT, foi apresentado um questionário para 94 sujeitos que tivessem alguma experiência com a modalidade. O objetivo do questionário foi conhecer a opinião a respeito do entendimento sobre as instruções, viabilidade de aplicação e predominância energética. Os participantes julgaram que o teste é \'fácil\' ou \'muito fácil de entender\', \'viável\' ou \'muito viável\' de aplicar e que ambos os testes medem predominantemente a condição anaeróbia. Quanto maior o grau de instrução, maior a frequência de resposta de que o FSKT10s é predominantemente anaeróbio, enquanto para o FSKTmult a maior frequência de resposta no grupo não graduado mede predominantemente a condição aeróbia e o grupo pós-graduado julgou que o teste mede predominantemente a condição anaeróbia. Na etapa seguinte 13 atletas de taekwondo do sexo masculino participaram em duas sessões experimentais para determinar a validade de critério entre a luta e o FSKT. Não foram encontradas associações entre as variáveis da luta e o FSKT. Não foram identificadas diferenças significantes para o lactato pico após FSKTmult e após luta, mas houve diferença estatística entre a luta e o FSKT10s. O objetivo seguinte foi determinar a validade de constructo. Foram avaliados 153 homens agrupados em não competidores (n= 53), competidores de nível regional/estadual (n= 55) e de nível internacional/nacional (n= 45) e 42 mulheres agrupadas em competidoras de nível regional/estadual (n= 21) e de nível internacional/nacional (n= 21). Houve superioridade dos competidores de nível nacional/internacional em comparação aos não competidores. As competidoras de nível regional/estadual diferiram do grupo de nível nacional/internacional. A etapa seguinte foi conduzida com 14 atletas para determinar a reprodutibilidade relativa e absoluta do FSKT em teste e reteste. Para a reprodutibilidade relativa foram observados valores de CCI entre 0,63 e 0,95. O EPM ficou entre 0,60 e 3,99 enquanto o SWC0,6 ficou entre 0,73 e 4,83 para as diferentes séries do FSKT. Na etapa seguinte foi determinada a sensibilidade do FSKT de 8 atletas após nove semanas de treinamento de taekwondo e de força/potência muscular. Foi observada melhora do desempenho gerado em todas as variáveis analisadas, exceto para o índice de decréscimo de chutes (IDC). Por fim, 115 homens e 70 mulheres praticantes/atletas familiarizados com o FSKT executaram cada teste uma vez. Após análise dos dados foi elaborada a tabela com cinco escalas (classificação, percentil: muito bom, >=95; bom, >75; regular, 25-75; ruim, <25; muito ruim, <=5) para as seguintes variáveis FSKT10S, FSKTmult (séries 1-5) e IDC. A conclusão é que o FSKT pode ser uma ferramenta utilizada por técnicos e treinadores visando medir o desempenho físico. Diferentes critérios de autenticidade científica foram apresentados no presente estudo, o que ajudará a tomar decisões mais confiáveis quando de sua aplicação. Também será possível classificar o desempenho dos praticantes/atletas via tabela normativa
The purpose of the present study was stablishing the authenticity criteria scientific of validity, reliability and the sensibility of FSKT10s and the FSKTmult for taekwondo. The secondary purpose was building a normative table to classify physical performance generated by FSKT. The study was conducted in six parts, content sample of practitioners or athletes in different competitive levels. Aiming to investigate the logical validity of FSKT, was presented a questionnaire for 94 subjects that would have any experience with the modality. The purpose was to know the opinion about the understanding of the instructions, feasibility of application and energetic predominance. The participants judged that the test is \"easy\" or \"very easy\", \"viable\" or \"many viable\" of apply and that both tests measure predominantly the anaerobic condition. The higher the level of education, higher is the response frequency of that the FSKT10s is predominantly anaerobic, while for FSKTmult the higher response frequency in the no-graduate group measure predominantly the aerobic condition and the postgraduate group judge that the test measure predominantly the anaerobic condition. In the next step 13 male taekwondo athletes participated in twice experimental sessions to determine a validity criterion between match and the FSKT. No associations were found between match variables and FSKT. No statistically significant difference were identified for the peak blood lactate concentration post FSKT and match, but there was statistical difference between the match and FSKT10s. the next objective was to determine the construct validity. 153 subjects were evaluated grouped in non-competitors (n= 53), regional/state competitors (n= 55) and national/international competitors (n= 45) and 42 women grouped in regional/state level competitors (n= 21) and international/national level (n= 21). There was a statistically significant difference with the superiority of national/international competitors compared to non-competitors. The regional/state level competitors differed from the national/international level group. The next step was conducted with 14 athletes to determine the relative and absolute reliability of FSKT test-retest. Regarding relative reliability, ICC values between 0.63 and 0.95 were observed. The EPM was between 0.60 and 3.99 while the SWC0.6 was between 0.73 and 4.83 for the different FSKT series. The next step was to determine the sensitivity of the FSKT of 8 athletes after nine weeks of taekwondo and strength training. It was observed an improvement in the performance generated in all variables analyzed except for the kicks decrement index (KDI). Finally, 115 mens and 70 womens practitioners/athletes familiar with the FSKT performed each test once. After analyzing the data, the table was elaborated with five scales (classification: \'Excellent\': >=95th percentile, \'Good\': 75th percentile up to 94th percentile, \'Regular\': 25th percentile up to 74th percentile, \'Poor\': 6th percentile up to 24th percentile, \'Very poor\': <=5th percentile) for the following variables FSKT10S, FSKTmult (series 1-5 and total) and IDC. The conclusion is that the FSKT can be a tool used by coaches and technicians to measure physical performance. Different criteria of scientific authenticity were presented in the present study, which will help to make more reliable decisions. It will also be possible to classify the performance of the practitioners/athletes, based on the classifications of the normative table

Style APA, Harvard, Vancouver, ISO itp.

Parr, Anita M. "TEACHER MADE TEST RELIABILITY: A COMPARISON OF TEST SCORES AND STUDENT STUDY HABITS FROM FRIDAY TO MONDAY IN A HIGH SCHOOL BIOLOGY CLASS IN MONROE COUNTY OHIO". Marietta College / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=marietta1142864088.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Test5"

Doody, Howdy, red. Eighth in a series. Boston: Crossref Publishing, 2018. http://dx.doi.org/10.5555/test6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Meyerhöfer, Wolfram. Tests im Test: Das Beispiel PISA. Opladen: Barbara Budrich, 2005.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Company, Riverside Publishing. The Iowa tests: Test coordinator guide. Itasca, IL: Riverside Pub., 2001.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

1949-, Rogers Bruce, red. TOEFL CBT practice tests: Test prep. Wyd. 7. Lawrenceville, NJ: Thomson/Peterson's, 2003.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Surname, Bob. Test title. Lynnfield: CrossRef, 2012. http://dx.doi.org/10.7717/test.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Surname, Bob. Temporary Title. Lynnfield: CrossRef, 2012. http://dx.doi.org/10.1606/test.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Tan, S. T. (Soo Tang), red. Applied calculus: Test bank with chapter tests. Wyd. 3. Boston: PWS-Kent Pub. Co., 1994.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

test. test, 2018.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Crossroads Tests: Tests Achievement Test Pack (Crossroads). Oxford University Press, USA, 1995.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Coshow, Sabrina. Re-Creating Bri's Testy Test Book: CC Test. Independently Published, 2015.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Test5"

Lascelles, P. T., i D. Donaldson. "Fluorescein Dilaurate (Pancreolauryl, International Laboratories Ltd) Test5". W Diagnostic Function Tests in Chemical Pathology, 57–58. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1846-7_30.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Justo, J. L. "Test Fills and in Situ Tests". W Advances in Rockfill Structures, 153–93. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3206-0_7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sharp, Todd Raymond. "Running Tests and Publishing Test Reports". W Introducing Micronaut, 25–38. Berkeley, CA: Apress, 2022. http://dx.doi.org/10.1007/978-1-4842-8290-8_3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gill, C. M. "Ace Tests and Conquer Test Anxiety". W College Success for Adults, 137–47. New York, NY: Routledge, 2021.: Routledge, 2020. http://dx.doi.org/10.4324/9781003030324-13.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Stetz, Thomas A. "Introduction to Tests and Test Bias". W Classroom Companion: Business, 1–8. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-89925-7_1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Wei, Anjiang, Pu Yi, Tao Xie, Darko Marinov i Wing Lam. "Probabilistic and Systematic Coverage of Consecutive Test-Method Pairs for Detecting Order-Dependent Flaky Tests". W Tools and Algorithms for the Construction and Analysis of Systems, 270–87. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-72016-2_15.

Pełny tekst źródła

Streszczenie:

AbstractSoftware developers frequently check their code changes by running a set of tests against their code. Tests that can nondeterministically pass or fail when run on the same code version are called flaky tests. These tests are a major problem because they can mislead developers to debug their recent code changes when the failures are unrelated to these changes. One prominent category of flaky tests is order-dependent (OD) tests, which can deterministically pass or fail depending on the order in which the set of tests are run. By detecting OD tests in advance, developers can fix these tests before they change their code. Due to the high cost required to explore all possible orders (n! permutations for n tests), prior work has developed tools that randomize orders to detect OD tests. Experiments have shown that randomization can detect many OD tests, and that most OD tests depend on just one other test to fail. However, there was no analysis of the probability that randomized orders detect OD tests. In this paper, we present the first such analysis and also present a simple change for sampling random test orders to increase the probability. We finally present a novel algorithm to systematically explore all consecutive pairs of tests, guaranteeing to detect all OD tests that depend on one other test, while running substantially fewer orders and tests than simply running all test pairs.

Style APA, Harvard, Vancouver, ISO itp.

Quicke, Donald L. J., Buntika A. Butcher i Rachel A. Kruft Welton. "Commonly used measures and statistical tests." W Practical R for biologists: an introduction, 103–18. Wallingford: CABI, 2021. http://dx.doi.org/10.1079/9781789245349.0010.

Pełny tekst źródła

Streszczenie:

Abstract There are a number of statistical tests that are frequently used, even by non-specialists. This chapter will cover tests such as Chi-squared, Fisher's exact test, Mann-Whitney U and several variations of the Student's t-test, amongst others.

Style APA, Harvard, Vancouver, ISO itp.

Pełny tekst źródła

Streszczenie:

Style APA, Harvard, Vancouver, ISO itp.

Rousson, Valentin. "Tests exacts avec statistique de test discrète". W Statistique appliquée aux sciences de la vie, 139–62. Paris: Springer Paris, 2013. http://dx.doi.org/10.1007/978-2-8178-0394-4_11.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Gälli, Markus. "Correlating Unit Tests and Methods under Test". W Extreme Programming and Agile Processes in Software Engineering, 317. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-540-24853-8_48.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Test5"

Gunkel, R. D., i M. S. Roy. "Age-Related Color Vision Changes Comparing F-M 100-Hue, Lanthony Desaturated D-15, and Gunkel Chromagraph". W Noninvasive Assessment of the Visual System. Washington, D.C.: Optica Publishing Group, 1986. http://dx.doi.org/10.1364/navs.1986.wa4.

Pełny tekst źródła

Streszczenie:

There are reports in the literature1,2,3,4that sensitivity to color as assessed by the Farnsworth-Munsell 100-Hue Test5 deteriorates with age, except between the ages of 10 and 19 years, when it has been shown to improve. These age-related losses in color discrimination might be due to changes occurring in the retinal or neural systems, transparency of the media, or to the test methods themselves.

Style APA, Harvard, Vancouver, ISO itp.

Dunn, Jennifer. "Test commander: providing automated tests". W Astronomical Telescopes and Instrumentation, redaktor Hilton Lewis. SPIE, 2002. http://dx.doi.org/10.1117/12.461431.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Tarantino, Mariano, Alessandro Del Nevo, Nicola Forgione i Giacomino Bandini. "Post Test Analysis of ICE Tests". W 2012 20th International Conference on Nuclear Engineering and the ASME 2012 Power Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/icone20-power2012-54952.

Pełny tekst źródła

Streszczenie:

Since 1999 ENEA is developing the heavy liquid metal (HLM) technology aiming to support the design and implementation of a Lead cooled Fast Reactor (LFR) and an Accelerator Driven System (ADS), both in the frame of the Italian and European research programs. In these contexts several experiments have been performed, in different fields, going from coolant thermal-hydraulic, component development and structural material characterization. Recently, in the frame of the IP-EUROTRANS (6th Framework Program EU), domain DEMETRA, ENEA assumed the commitment to perform an integral experiment aiming to reproduce the primary flow path of a pool-type nuclear reactor, cooled by Lead Bismuth Eutectics (LBE). This experimental activity, named “Integral Circulation Experiment (ICE)”, has been implemented thanks a joint effort of several research institutes, mainly ENEA and University of Pisa, allowing to design an appropriate test section. This has been installed in the CIRCE facility, the largest worldwide experimental facility for the HLM technology investigation. The goal of the experiments was to demonstrate the technological feasibility of a heavy liquid metal (HLM) pooltype nuclear system in a relevant scale (1 MW), investigating the related thermal–hydraulic behavior under both steady state and transient conditions. This paper reports a description of the experiment, as well as the results carried out in the first experimental campaign run on the CIRCE pool, which consists of a full power steady state test, an un-protected loss of heat sink (ULOH) test, and an un-protected loss of flow (ULOF) test. The post-test analyses of the experiments is presented. The whole domain has been modeled by a suitable 1-D nodalization, and the results carried out have been studied performing numerical calculations by the REALP5 system code modified to take in account the LBE thermal-physical properties when employed as nuclear coolant. The obtained experimental results as well as the performed post-test analysis have demonstrated the thermal-hydraulic and technological feasibility of a pool-type nuclear system cooled by HLM.

Style APA, Harvard, Vancouver, ISO itp.

Peng Yang, Shuming Yang, Jing Qiu, Guanjun Liu i Gangyong Chen. "Sequential test strategies with unreliable tests". W 2008 IEEE AUTOTESTCON. IEEE, 2008. http://dx.doi.org/10.1109/autest.2008.4662685.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Heinrich, Ralf, Holger Streitwolf, Lothar Dallwitz i Uwe Karsten. "Test device for radiated immunity tests". W 2009 20th International Zurich Symposium on Electromagnetic Compatibility. IEEE, 2009. http://dx.doi.org/10.1109/emczur.2009.4783482.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Zhang, Jiliang. "Test Design with Multiple Tests Combined". W 2022 Annual Reliability and Maintainability Symposium (RAMS). IEEE, 2022. http://dx.doi.org/10.1109/rams51457.2022.9894008.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Llana, Patricia, David Tyrell i Przemyslaw Rakoczy. "Conventional Locomotive Coupling Tests: Test Requirements and Pre-Test Analysis". W 2016 Joint Rail Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/jrc2016-5817.

Pełny tekst źródła

Streszczenie:

Research to develop new technologies for increasing the safety of passengers and crew in rail equipment is being directed by the Federal Railroad Administration’s (FRA’s) Office of Research, Development, and Technology. Crash energy management (CEM) components which can be integrated into the end structure of a locomotive have been developed: a push-back coupler and a deformable anti-climber. These components are designed to inhibit override in the event of a collision. The results of vehicle-to-vehicle override, where the strong underframe of one vehicle, typically a locomotive, impacts the weaker superstructure of the other vehicle, can be devastating. The components are designed to improve crashworthiness for equipped locomotives in a wide range of potential collisions, including collisions with conventional locomotives, conventional cab cars, and freight equipment. Concerns have been raised in discussions with industry that push-back couplers may trigger prematurely, and may require replacement due to unintentional activation as a result of service loads. It has been shown analytically that push back coupler trigger loads exceed the service load capacity of conventional couplers and draft gears. Two sets of coupling tests are planned to demonstrate this, one with a locomotive equipped with conventional draft gear and coupler and another with a locomotive equipped with a pushback coupler. These tests allow for comparison of conventional with CEM-equipped locomotive measured performance during coupling. In addition to the coupling tests, car-to-car compatibility tests of equipped locomotives and a train-to-train test are also planned. This arrangement of tests allows for evaluation of the CEM-equipped locomotive performance, as well as comparison of measured with simulated locomotive performance in the car-to-car and train-to-train tests. In the coupling tests of conventional equipment, the maximum coupling speed for which there is no damage to either vehicle will be measured. A moving locomotive will be coupled to a standing cab car. The coupling speed for the first test will be 2 mph, the second test 4 mph, and the tests will continue with the speed incrementing by 2 mph until damage occurs to either vehicle. This paper describes the test requirements and analysis predictions for the coupling tests of conventional equipment. The equipment to be tested, track conditions, test procedures, and measurements to be made are described. A one-dimensional model for predicting the longitudinal forces acting on the equipment and couplers has been developed, along with preliminary predictions for the conventional coupling tests. It is expected that damage will occur for coupling speeds between 6 and 8 mph.

Style APA, Harvard, Vancouver, ISO itp.

Jorde, Matthew, Sebastian Elbaum i Matthew B. Dwyer. "Increasing Test Granularity by Aggregating Unit Tests". W 2008 23rd IEEE/ACM International Conference on Automated Software Engineering. IEEE, 2008. http://dx.doi.org/10.1109/ase.2008.11.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Stratis, Panagiotis, i Ajitha Rajan. "Reordering tests for faster test suite execution". W ICSE '18: 40th International Conference on Software Engineering. New York, NY, USA: ACM, 2018. http://dx.doi.org/10.1145/3183440.3195048.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Shin, Seung-Hun, Seung-Kyu Park, Kyung-Hee Choi i Ki-Hyun Jung. "Normalized Adaptive Random Test for Integration Tests". W 2010 IEEE 34th Annual Computer Software and Applications Conference Workshops (COMPSACW). IEEE, 2010. http://dx.doi.org/10.1109/compsacw.2010.65.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Test5"

Weeks i Dash Weeks. L52336 Weld Design Testing and Assessment Procedures for High-strength Pipelines Curved Wide Plate Tests. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), grudzień 2011. http://dx.doi.org/10.55274/r0010452.

Pełny tekst źródła

Streszczenie:

A variety of mechanical property tests are performed in the design, construction and maintenance phase of a pipeline. Most of the tests are performed by use of small-scale specimens with size typically in the range of a few inches to tens of inches (1 in = 25.4 mm). There are numerous test labs capable of performing most small-scale tests. These tests can be performed effectively under a variety of conditions, e.g., test temperature, strain rate, and loading configuration. More importantly, most routine small-scale tests are performed in accordance with national and international standards, ensuring the consistency of testing procedures. To confirm pipeline designs and validate material performance, it is desirable to test girth welds under realistic service conditions. Full-scale tests can incorporate certain realistic features that small-scale specimens cannot. However, these tests can be time-consuming and expensive to conduct. Very few labs can perform the tests, even with months of start-up and preparation time. There are no generally accepted, consistent test procedures among different test labs. The data acquisition and post-processing may differ from lab to lab, creating difficulties in data comparison. Full-scale tests can only be performed under selected conditions as a supplemental tool to the small-scale tests. The work described in this report focuses on the development of test procedures and instrumentation requirements for curved-wide-plate (CWP) tests. The results of this work can be used for: Developing a test methodology to measure the physical response of a finite-length surface-breaking flaw to axial loads applied to a girth welded line pipe section, Determining the appropriate instrumentation to fully characterize the global stress/strain response of the CWP specimen during loading, Evaluating the applicability of the test methodology for sub-ambient temperatures, and Developing a standardized test procedure for CWP testing with a wide range of test parameters.

Style APA, Harvard, Vancouver, ISO itp.

Corscadden, Louise, i Anjali Singh. Grip Strength Test In Rodents. ConductScience, styczeń 2023. http://dx.doi.org/10.55157/cs2023109.

Pełny tekst źródła

Streszczenie:

The grip strength test is one of the most commonly applied tests in animal laboratories to measure neuromuscular functions or disorders. It was first developed in the 1970s. Today a wide range of techniques are available to study muscle strength in rodents. These methods are categorized into two categories:[2] Invasive method: In situ and in vitro measurements of muscle force are invasive methods. Non-invasive method: This method only includes in vivo measurement tests to analyze muscle force such as treadmill tests, wire hang tests, swimming endurance, vertical pole test, and grip strength tests. The most convenient technique of all tests is the grip strength test. It’s most convenient and causes less stress to animals. The grip test has been widely used in order to investigate the phenotypes of transgenic mice with neuromuscular disease and evaluate potential compounds involved in the motor functioning of organisms. The tests have been serving the purpose for 30 years either alone or in combination with other tests.

Style APA, Harvard, Vancouver, ISO itp.

Deaton i Frost. L51571 Pipe-Soil Interaction Tests on Sand and Soft Clay. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), październik 1987. http://dx.doi.org/10.55274/r0010291.

Pełny tekst źródła

Streszczenie:

This project was performed to establish a basis for developing pipe-soil interaction models suitable for PRCI's pipeline design program: "PIPEDYN". Full-scale pipe-soil tests on loose and dense sand and soft clay were performed at the Norwegian Hydrotechnical Laboratory, affiliated with SINTEF. The program tested soil resistance to lateral motions of full-scale (0.5 m and 1.0 m OD) pipe sections on loose and dense sand and soft clay. A test rig was used with a soil flume 12.5 m long, 1.8 m wide, and 0.6 m high, and containing 13.5 m3 of sand or soft clay. Three control signals were applied to the test pipes: simple breakout, regular oscillatory tests and breakout, and random tests with force time histories. The parameters considered were pipe diameter, pipe weight, pipe oscillations, and oscillation amplitude. A total of 110 tests were performed in 25 test flumes (13 preliminary and 12 main) on loose sand, three test flumes on dense sand and ten test flumes on soft clay. Forty-five preliminary and 32 main tests were performed in 25 loose sand flume preparations, whereas 8 main tests were performed in 3 dense sand flumes and 25 main tests in 10 soft clay flumes, for a grand total of 110 pipe-soil tests in 38 soil flumes. Special plate and cone penetration tests were also performed as part of the soil bed tests. Based on the results of the tests, pipe penetration appears to be the most important factor influencing lateral soil resistance. Also, the soil resistance in loose sand was generally higher than in dense sand due to larger pipe penetration and an accordingly higher lateral earth pressure.

Style APA, Harvard, Vancouver, ISO itp.

Kelner, Britton i Sparks. L51986 Natural Gas Sample Collection and Handling Phase II Simulated Field Conditions. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), styczeń 2003. http://dx.doi.org/10.55274/r0011157.

Pełny tekst źródła

Streszczenie:

Phase II was originally planned as a series of field tests to confirm the results of the sampling methods performance tests conducted during Phase I. However, the API Chapter 14.1 Gas Sampling Research Working Group chose to have the tests conducted at a newly developed wet gas test facility located at the Colorado Engineering Experiment Station (CEESI), in Nunn, Colorado. Three general tests were conducted. Test Plan I was intended to investigate the effects of sample point location on on-line gas chromatograph (GC) analyses and on spot sampling methods. Test Plan II was intended to investigate the effects of sample point location on on-line GC analyses and to compare several spot sampling methods when sampling from the same point. Test Plan III was intended to investigate the effects of coupling configurations and cylinder temperature on two specific methods: Helium Pop, and purging - Fill/Empty.

Style APA, Harvard, Vancouver, ISO itp.

Wang i Zhou. L52334 Curved Wide Plate Test Results and Transferability of Test Specimens. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), grudzień 2011. http://dx.doi.org/10.55274/r0010008.

Pełny tekst źródła

Streszczenie:

The work described in this report focuses on the development of data processing routines for curved-wide-plate (CWP) tests, the presentation of test results in a consistent and unified format, generation of fracture resistance curves from, and the examination of transferability between CWP and SENT (single-edge-notched tension) test specimens. The results of this work can be used for: Drafting and implementing consistent test procedures for CWP tests, Formulating test data for consistent presentation and comparison, Understanding the differences and limitations of test specimens of different scales, Making the best selection of test specimens for a given set of objectives, and Making correct interpretation of test data and their relevance to girth weld performance.

Style APA, Harvard, Vancouver, ISO itp.

Sarin, N. K. Operating procedures - flame tests on rigid ducts used for mine ventilation. Natural Resources Canada/CMSS/Information Management, 1987. http://dx.doi.org/10.4095/331775.

Pełny tekst źródła

Streszczenie:

Flammability tests are carried out on a variety of flexible and rigid duct materials used for mine ventilation in order to evaluate their fire-resistance and their suitability in a mining environment. Several tests are available for this purpose, however, CEAL has been using CSA standard C22.2 No. 30 for at least 10 years as part of its program for certification of various mining products. An interim large scale gallery test has been introduced since July, 1985 in order to determine if better repeatability of test results can be obtained. The aim is to eliminate threats to health and safety resulting from the use of such products in the mines. Special attention has been given to the safety precautions and sequence of operations necessary while conducting tests. A standard test recording sheet and test layout diagrams are also presented.

Style APA, Harvard, Vancouver, ISO itp.

Aiken, William B. PR-203-910-R01 Program for Screen Testing Mechanical Connectors for Use in J-Lay Installations. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), maj 1989. http://dx.doi.org/10.55274/r0011972.

Pełny tekst źródła

Streszczenie:

This report describes the development of a Scope of Work for the screening test program. The Committee will submit the Scope of work to potential testing laboratories as a part of a request for a quotation package. It completely defines the tests that will be required in the screening test program. Manufacturers of several of the selected connectors have submitted reports to the committee that describe the procedures and results of tests that have already been performed on their connectors. When possible, the committee wants to use these test results to eliminate duplicate testing and improve the cost-effectiveness of the screening test program.

Style APA, Harvard, Vancouver, ISO itp.

McCarthy, James, i Wendy Coulson. PR-312-17204-R01 Portable Analyzer Method Update - Phase 2. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), wrzesień 2018. http://dx.doi.org/10.55274/r0011520.

Pełny tekst źródła

Streszczenie:

This report provides status and results after completing Phase 2 of an ongoing project to develop a simplified test method for portable analyzer emissions tests. The Phase 1 report provided the technical rationale for simplifying procedures (e.g., calibration) and reducing associated costs based on the inherent linearity associated with the physical properties of electrochemical cells, which are the analytical technology used in current generation electrochemical analyzers. The Phase 1 report also identified the primary criteria for the simplified methodology. This document provides a listing of related PRCI project documents, including the project plan, the draft test method, and the data gaps memo. The main focus of this report is to present results of lab and field experimentation conducted in 2016 and 2017 designed to address the data gaps. Portable analyzer manufacturers (Testo, AMETEK, and ECOM) demonstrated support for this project via cofounding and participation in experimentation and draft method discussions. The conclusions drawn from the experimentation in support of draft method revisions will be discussed in greater detail in the final report.

Style APA, Harvard, Vancouver, ISO itp.

Geissler, G., D. Birmingham, J. Blake, H. Carter, M. Childerson, R. Ferron, T. Habib i in. Multiloop Integral System Test (MIST) (Final report: Test group 30, Mapping Tests). Office of Scientific and Technical Information (OSTI), grudzień 1989. http://dx.doi.org/10.2172/7023826.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Unknown, Author. PR-170-812-R01 Hydrodynamic Forces on a Sliding Pipeline - Model Tests. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), sierpień 1988. http://dx.doi.org/10.55274/r0011999.

Pełny tekst źródła

Streszczenie:

Tests to determine the hydrodynamic forces acting on a submarine pipeline when it becomes unstable under the influence of severe environmental loads. The study has been carried out in a scaled-down model test programmed comprising approximately 500 tests.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!