Gotowa bibliografia na temat „TEGs”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „TEGs”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "TEGs"
Gogoc, Szymon, i Przemyslaw Data. "Organic Thermoelectric Materials as the Waste Heat Remedy". Molecules 27, nr 3 (2.02.2022): 1016. http://dx.doi.org/10.3390/molecules27031016.
Pełny tekst źródłaLiu, Qiulin, Guodong Li, Hangtian Zhu i Huaizhou Zhao. "Micro thermoelectric devices: From principles to innovative applications". Chinese Physics B 31, nr 4 (1.04.2022): 047204. http://dx.doi.org/10.1088/1674-1056/ac5609.
Pełny tekst źródłaCamut, Julia, Eckhard Müller i Johannes de Boor. "Analyzing the Performance of Thermoelectric Generators with Inhomogeneous Legs: Coupled Material–Device Modelling for Mg2X-Based TEG Prototypes". Energies 16, nr 9 (24.04.2023): 3666. http://dx.doi.org/10.3390/en16093666.
Pełny tekst źródłaFaheem, Muhammad, Muhammad Abu Bakr, Muntazir Ali, Muhammad Awais Majeed, Zunaib Maqsood Haider i Muhammad Omer Khan. "Evaluation of Efficiency Enhancement in Photovoltaic Panels via Integrated Thermoelectric Cooling and Power Generation". Energies 17, nr 11 (27.05.2024): 2590. http://dx.doi.org/10.3390/en17112590.
Pełny tekst źródłaSanin-Villa, Daniel, Oscar Danilo Montoya i Luis Fernando Grisales-Noreña. "Material Property Characterization and Parameter Estimation of Thermoelectric Generator by Using a Master–Slave Strategy Based on Metaheuristics Techniques". Mathematics 11, nr 6 (9.03.2023): 1326. http://dx.doi.org/10.3390/math11061326.
Pełny tekst źródłaAttar, Alaa, Mohamed Rady, Abdullah Abuhabaya, Faisal Albatati, Abdelkarim Hegab i Eydhah Almatrafi. "Performance Assessment of Using Thermoelectric Generators for Waste Heat Recovery from Vapor Compression Refrigeration Systems". Energies 14, nr 23 (6.12.2021): 8192. http://dx.doi.org/10.3390/en14238192.
Pełny tekst źródłaSingh, Yogesh, Satyendra kumar Singh i Purnima Hazra. "Future Prospect of Rare Earth Element Free Materials for Thermoelectric Generators". ECS Transactions 107, nr 1 (24.04.2022): 453–64. http://dx.doi.org/10.1149/10701.0453ecst.
Pełny tekst źródłaMashburn, Paulla, Jodie Ecklund i Jeffrey Riley. "Do Heparinase Thrombelastographs Predict Postoperative Bleeding?" Journal of ExtraCorporeal Technology 28, nr 4 (grudzień 1996): 185–90. http://dx.doi.org/10.1051/ject/1996284185.
Pełny tekst źródłaFaraj, Jalal, Wassim Salameh, Ahmad Al Takash, Georges El Achakr, Hicham El Hajj, Cathy Castelain i Mahmoud Khaled. "Dual harvesting from exhaust gas of diesel generators using thermoelectric generators and cold water tank". Journal of Physics: Conference Series 2754, nr 1 (1.05.2024): 012021. http://dx.doi.org/10.1088/1742-6596/2754/1/012021.
Pełny tekst źródłaMorais, Flávio, Pedro Carvalhaes-Dias, Luís Duarte, Anderson Spengler, Kleber de Paiva, Thiago Martins, Andreu Cabot i José Siqueira Dias. "Optimization of the TEGs Configuration (Series/Parallel) in Energy Harvesting Systems with Low-Voltage Thermoelectric Generators Connected to Ultra-Low Voltage DC–DC Converters". Energies 13, nr 9 (6.05.2020): 2297. http://dx.doi.org/10.3390/en13092297.
Pełny tekst źródłaRozprawy doktorskie na temat "TEGs"
Lönn, Anders, i Tomas Nyberg. "Utbyte mellan Polishögskolan i Umeå och Tegs centralskola". Thesis, Umeå University, Basic training programme for Police Officers, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-27271.
Pełny tekst źródłaTegs central skola har tidigare varit en s.k. problemskola, men har numer ett mycket bättre rykte. Vi har fått antydningar om att det finns ett stort intresse från skolan och föräldrarna till eleverna, att polisen ska komma till skolan och informera ungdomarna om t.ex. alkohol/droger och mobbing. Tyvärr har polisen i dagens läge vare sig resurser eller tid att fullt ut tillmötesgå dessa önskemål. Tanken med vårt arbete är att skaffa oss en uppfattning om det är möjligt, och om intresse finns att starta ett förhoppningsvis långvarigt samarbete mellan Tegs central skola och polisutbildningen i Umeå. Vi vill ta reda på vilka problemområden som finns på skolan och i slutändan kunna presentera idéer om hur man tillsammans ska kunna arbeta för att minimera dessa problem. Arbetet kommer att visa på olika faktorer som ligger bakom ungdomars inträde i kriminaliteten, och även idéer om hur ett samarbete mellan skolorna skulle kunna se ut kommer att presenteras
Roepsch, Jodi Ann. "Characterizaton of Triethoxyfluorosilane and Tetraethoxysilane Based Aerogels". Thesis, University of North Texas, 2001. https://digital.library.unt.edu/ark:/67531/metadc2999/.
Pełny tekst źródłaHartman, Jennifer. "Alignment of Middle School Core TEKS with Visual Arts TEKS". Thesis, University of North Texas, 2010. https://digital.library.unt.edu/ark:/67531/metadc33160/.
Pełny tekst źródłaOulfarsi, Mostafa. "Contribution à l’amélioration de la fiabilité de modules thermoélectriques : développement de solutions matériaux alternatives". Electronic Thesis or Diss., Université de Lorraine, 2020. http://www.theses.fr/2020LORR0228.
Pełny tekst źródłaEnergy conversion from waste heat through thermoelectric effects (Seebeck effect) is a potential new renewable energy source. The thermoelectric (TE) technology is nevertheless limited to niche terrestrial applications due to its low efficiency (5-6%), but also due to the technological challenges to be overcome to avoid a degradation of the TE generators (TEG). Our thesis is devoted to this problem within the framework of a research program supported by the ANR (RELIATEG project) including HotBlockOnBoard (HBOB), CEA LITEN, CIRIMAT and IJL as partners. The objective is to make reliable the TEG, manufactured by HBOB, based on silicides, Mg₂Si₁₋ₓSnₓ (n-type) and MnSi₁₊ᵧ (p-type), for long-term use in the vicinity of 400-500°C. Our main role is to understand the mechanisms leading to their embrittlement, particularly to the oxidation problems linked to the Mg₂Si₀,₆Sn₀,₄ material. As they are unavoidable, we turned to the solutions of finding a protective coating and/or testing the thermal stability under air of a Mg₂Si₁₋ₓSnₓ material, less sensitive to oxidation. After a bibliographical synthesis of the basic concepts of TE and of the state of the art of TE materials, the choice of materials used by HBOB have been justified. The various stages of TEG manufacturing and the experimental techniques used to characterize the microstructure of TE materials and their thermal stability are presented. The performance tests performed on TEGs show that the power obtained, measured up to 450°C, is reproducible for the 25 devices tested. However, it is about 25% lower than what one could achieve with a perfect TEG, as shown by the simulations we carried out using the Comsol MultiPhysics software. The stability tests showed that the devices are stable under air at 250°C, for 500 hours or under 1000 cycles, and that they begin to degrade under air at 350°C through a pesting phenomenon linked to the oxidation of Mg₂Si₀,₆Sn₀,₄. Under vacuum, this process is slowed down but the presence of residual oxygen does not completely stabilize the material. At 500°C under air, the pesting is observed from 3 hours of testing. The oxidation tests carried out on the two materials with different Sn content showed the significant role of tin on the oxidation phenomena. A model explaining the pesting phenomenon was developed by the combined analyses of results obtained by thermogravimetric measurements, scanning electron microscopy and X-ray diffraction. On the basis of bibliography and phase diagrams of the differents systems, protective coatings based on ceramics, metallic silicides, metals and glasses have been studied. Several deposition methods were explored: sintering by Spark Plasma Sintering, electrochemical nickel plating, pack cementation, slurry, PVD and spray deposits. The most promising coatings were obtained with a glass whose CTE is close to that of the n-type material
Nakasēs, Athanasios. "O naos tēs Athēnas Makistu /". Athēna : Tameio Archaiologikōn Porōn kai Apallotriōseōn, 2004. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=014734171&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Pełny tekst źródłaRoper, Nick. "South Tees diabetes mortality study". Thesis, University of Newcastle upon Tyne, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.399543.
Pełny tekst źródłaTarnoff, David. "Episode 3.02 – Tens Complement Arithmetic". Digital Commons @ East Tennessee State University, 2020. https://dc.etsu.edu/computer-organization-design-oer/18.
Pełny tekst źródłaIerokēpiōtēs, Kōstas G. "Ē ellēnikē ekpaideusē stēn eparchia Paphu (1878-1960) : symbolē stēn istoria tēs ekpaideusēs tēs Kypru /". Leukōsia : Politistikes Hypēresies Hypurgeiu Paideias kai Politismu, 2004. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=020301014&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Pełny tekst źródłaCampagne, Ibarcq Claudie. "Tels serviteurs, tels maîtres : la représentation des domestiques dans la peinture vénitienne de la Renaissance". Paris, EHESS, 2015. http://www.theses.fr/2015EHES0051.
Pełny tekst źródłaRenaissance Venetian paintings include many servants, who often escape the notice of those who view them. A systematic statistical inventory of those servant figures and their grouping into different categories have made it obvious that those figures are hardly ever realistic or decorative but are most of the time an integral part of a symbolic system focusing on their masters' place in society and of the elite's conception of its social role, in particular during the more aristocratic second half of the sixteenth century. On the other hand, servant figures may be used to express views on varied subjects, either literary, theological or political, or even with an artistic or satirical goal in mind. Indeed, servants, figures of the popolo, have a legitimate place in pictorial representation in a city such as Venice where the Patricians like to think of the community as united. The systematic study of servants in painting has also led to a new questioning of well-known works when they include servant figures which differ from traditional or contemporary norms. The study of those discrepancies has shed a new light on those works by Carpaccio, Titian, Tintoretto and Veronese
Frangelakis, Fotios. "Controlling and upscaling laser induced surface morphology : from tens of microns to tens of nanometres". Thesis, Bordeaux, 2019. http://www.theses.fr/2019BORD0021/document.
Pełny tekst źródłaCurrent industrial markets demand highly value-added products offering new features at a low-cost. Among the most desired functionalities are surface colouring and blackening, anti-icing, anti-biofouling, wear reduction and anti-reflectivity. Laser surface processing holds a virtually endless potential in surface functionalization since it can generate versatile surface properties by modifying surface morphology and chemistry. Nevertheless, developing functional surfaces for implementation in the industry requires action on three levels. The first is to connect the macro-scale surface properties (colour, mechanical resistance, chemical stability, ageing) and the micro & nano-scale morphology. The second is to increase the level of control over the laser induced morphology in the near micron and submicron scale. The third is to upscale the lab-developed process both in terms of processed area and cycle time. Functional textures found in nature can be used as a guideline for connecting the surface texture with the surface property. It is well established that different textures can enable different functionalities. Nevertheless, the level of control of the laser induced morphology has to be improved significantly in order to allow one to mimic nature’s examples. Increase of control requires an in-deep understanding of the physical mechanisms that lead to nanostructure formation. To this end, we carry out a comprehensive parametric study of fs processing on stainless steel. The impact of wavelength, overlap, fluence, dose, repetition rate, polarization and interpulse delay in the induced morphology was investigated.We investigate several techniques to achieve controlled laser structuring in the submicron regime. Ripples of a few tens of nanometres were obtained with a UV laser. Double pulses were employed to further control the submicron structures. Structures of different size and symmetry were obtained in different delays underlining the key role of the interpulse delay (Δτ). Homogeneous triangular and square 2D-LIPSS were obtained for Δτ smaller than 5 ps and 500 ps, respectively. Process parameters and particularly fluence and polarization were found to play also a role in the laser induced feature characteristics. In a complementary set of experiments, we show that similar results can be obtained for small delays with a robust setup of birefringent crystals. In the above micron regime, trains of single pulses were employed for controlling the surface morphology. Fluence, dose and repetition rate, were varied to show a systematic variation of spikes in the range of tens of micrometers. Combining our experimental results with simulation data we underline the key role of heat accumulation on the structures size. Finally, we proposed an upscaling strategy showing the possibility to exploit repetition rates up to 10 MHz for laser texturing.In the upscaling part, areas much larger than the spot size were textured homogenously using high repetition rate laser and innovative laser positioning systems. Nanometric ripples induced by UV laser act as a subwavelength grating. Laser induced nano roughness exhibits superhydrophobic properties. Uniform distribution of well-defined, sub-wavelength, 2D-LIPSS was successfully generated over ~1 cm2. The final surface exhibits multiple axis iridescence giving a holographic effect. Employing a 10 MHz laser surface was textured at a rate of ~ 1 min/cm2 almost 60 times faster compared to our starting point. Lastly, surface blackening was achieved at a rate of ~ 9 sec/cm2.In conclusion, valuable data were provided both in surface functionalization, in understanding and controlling of laser induced structuring and in upscaling a lab developed process. We believe that our results open the way for exploiting fs laser texturing in everyday applications employing up to date laser sources and positioning systems
Książki na temat "TEGs"
Vavouskos, Anastasios Kōn, i Anastasios Kōn Vavouskos. Themeliōdeis arches tēs ekklēsiastikēs dikonomias tēs ekklēsias tēs Ellados: Ē archē tēs exasphaliseōs tēs anexartēsias kai tēs amerolēpsias tōn organōn aponomēs tēs ekklēsiastikēs dikaiosynēs. Thessalonikē: Etaireia Makedonikōn Spoudōn, 2003.
Znajdź pełny tekst źródłaTsirimōkou, Lizy. Grammatologia tēs polēs, logotechnia tēs polēs, poleis tēs logotechnias. Athēna: Lōtos, 1988.
Znajdź pełny tekst źródłaTsirimōkou, Lizy. Grammatologia tēs polēs, logotechnia tēs polēs, poleis tēs logotechnias. Athēna: Lōtos, 1988.
Znajdź pełny tekst źródłaKatsinēs, Mētsos. Tēs leuterias kai tēs eirēnēs. Athēna: To Hellēniko Vivlio, 1990.
Znajdź pełny tekst źródłaKaloutsa-Maurokephalou, Lilē. Tēs phōtias kai tēs erēmias. Athēna: "Nea Synora" Ekdotikos Organismos Livanē, 1997.
Znajdź pełny tekst źródłaBurton, Katherine, i Katherine Burton. Tess. Toronto: Harlequin Books, 1989.
Znajdź pełny tekst źródłaTecs. Llandysul: Gwasg Gomer, 1987.
Znajdź pełny tekst źródłaTennant, Emma. Tess. London: HarperCollins, 1993.
Znajdź pełny tekst źródłaReekie, Jocelyn. Tess. Vancouver, B.C: Raincoast, 2002.
Znajdź pełny tekst źródłaTennant, Emma. Tess. Halifax: Remploy Press, 1994.
Znajdź pełny tekst źródłaCzęści książek na temat "TEGs"
Nikitin, Mikhail, i Sergey Skipidarov. "The Nature of Heat Exchange of Human Body with the Environment and Prospects of Wearable TEGs". W Thin Film and Flexible Thermoelectric Generators, Devices and Sensors, 207–19. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-45862-1_8.
Pełny tekst źródłaRennels, Donald C., i Hobart M. Hudson. "Tees". W Pipe Flow, 177–200. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118275276.ch16.
Pełny tekst źródłaLatham, David W. "TESS". W Encyclopedia of Astrobiology, 1660. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-11274-4_1574.
Pełny tekst źródłaGooch, Jan W. "Tego". W Encyclopedic Dictionary of Polymers, 731. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_11596.
Pełny tekst źródłaLatham, David W. "TESS". W Encyclopedia of Astrobiology, 2481. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-44185-5_1574.
Pełny tekst źródłaBohnen, R. "TEMS". W Taktische Medizin, 379–87. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-39689-2_27.
Pełny tekst źródłaBolmont, Emeline, i Marion Cointepas. "TESS". W Encyclopedia of Astrobiology, 1–2. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. http://dx.doi.org/10.1007/978-3-642-27833-4_5566-1.
Pełny tekst źródłaMusselwhite, David. "Tess". W Social Transformations in Hardy’s Tragic Novels, 108–44. London: Palgrave Macmillan UK, 2003. http://dx.doi.org/10.1057/9780230504523_5.
Pełny tekst źródłaLatham, David W. "TESS". W Encyclopedia of Astrobiology, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-27833-4_1574-2.
Pełny tekst źródłaBolmont, Emeline, i Marion Cointepas. "TESS". W Encyclopedia of Astrobiology, 3018–19. Berlin, Heidelberg: Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-65093-6_5566.
Pełny tekst źródłaStreszczenia konferencji na temat "TEGs"
Sullivan, Owen, Saibal Mukhopadhyay i Satish Kumar. "Thermoelectric Generators Embedded in Microelectronic Chip". W ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87953.
Pełny tekst źródłaKishita, Yusuke, Michinori Uwasu, Hiroyuki Takeda, Keishiro Hara, Yuji Ohishi i Masashi Kuroda. "Assessing the Greenhouse Gas Emissions and Cost of Thermoelectric Generators for Passenger Automobiles: A Life Cycle Perspective". W ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34483.
Pełny tekst źródłaYan, Baoyu, Gen Li, Hongfen Cao, Xiaozhong Wang, Zhongcheng Wang i Yulong Ji. "Experimental Study on the Effect of Interface Heat Transfer on Performance of Thermoelectric Generators". W ASME 2019 6th International Conference on Micro/Nanoscale Heat and Mass Transfer. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/mnhmt2019-4156.
Pełny tekst źródłaArifeen, Shams U., Victor Wolemiwa, Dominic Nwoke, Lyudmyla L. Barannyk, Gabriel P. Potirniche, Aicha Elshabini i Fred Barlow. "Finite Element Analysis and Fatigue Life Prediction of an Aluminum Alloy Braze for High Temperature Thermoelectric Generator Package Assembly". W ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38829.
Pełny tekst źródłaZhou, Siyi, Bahgat G. Sammakia, Bruce White, Peter Borgesen i Cheng Chen. "Enhancement of the Power-Conversion Efficiency for Thermoelectric Generators". W ASME 2013 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ipack2013-73225.
Pełny tekst źródłaLin, Chih Chieh, Hanfei Chen, Mahder Tewolde, Gaosheng Fu, Di Liu, Tao Zhang, He Tao i in. "Thermoelectrically Powered Sensing for Small Modular Reactors". W ASME 2013 Heat Transfer Summer Conference collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/ht2013-17788.
Pełny tekst źródłaCoday, Eric, Jordan Parker, Randall Johnson i Shawn Duan. "Design and Analysis of an Innovative Portable Water-Cooled Thermoelectric Generator Apparatus". W ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-10804.
Pełny tekst źródłaLee, Soochan, Nishant Singh, Patrick E. Phelan i Carole-Jean Wu. "Harvesting CPU Waste Heat Through Pyroelectric Materials". W ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ipack2015-48421.
Pełny tekst źródłaDove, Megan, Jaideep Pandit, Srinath Ekkad i Scott Huxtable. "Experimental Validation of Temperature Distributions Across a Heat Exchanger for a Thermoelectric Generator". W ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88282.
Pełny tekst źródłaNajeeb, Ovais Ahmed Bin, Rasish Khatri, Liping Zheng i Jeremy Liu. "The Development of Turboexpander-Generators for Gas Pressure Letdown Part 3: Design Validation". W ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-82293.
Pełny tekst źródłaRaporty organizacyjne na temat "TEGs"
Neville, Kelly. Training Environment Support System (TESS). Fort Belvoir, VA: Defense Technical Information Center, luty 2003. http://dx.doi.org/10.21236/ada413042.
Pełny tekst źródłaJaison, Shaleena. TEDS Operating Modes and Control Strategies. Office of Scientific and Technical Information (OSTI), czerwiec 2023. http://dx.doi.org/10.2172/1986471.
Pełny tekst źródłaministerråd, Nordisk. Utviklingen i nordisk arverett - tegn i tiden. Nordic Council of Ministers, luty 2013. http://dx.doi.org/10.6027/tn2013-517.
Pełny tekst źródłaMichelsen, Gunnar. Grenseløse tegn? – Mobilitet og tegnspråk i Norden. Nordens välfärdscenter, maj 2021. http://dx.doi.org/10.52746/ishc6013.
Pełny tekst źródłaLybanon, M. Oceanographic Expert System: Potential for TESS(3) Applications. Fort Belvoir, VA: Defense Technical Information Center, lipiec 1992. http://dx.doi.org/10.21236/ada254908.
Pełny tekst źródłaLu, Xingang, i Wei Lu. Analgesia effect of TENS on myofascial pain syndrome. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, grudzień 2021. http://dx.doi.org/10.37766/inplasy2021.12.0090.
Pełny tekst źródłaNovotny, Vaclav, Junyung Kim, Terry Morton, Sarah Creasman i Daniel Mikkelson. Validation and Verification of TEDS Facility HYBRID Modeling. Office of Scientific and Technical Information (OSTI), wrzesień 2023. http://dx.doi.org/10.2172/2299518.
Pełny tekst źródłaSolberg, Jason B. MIL-STD-1660 Tests on Tactical Explosive System (TEXS). Fort Belvoir, VA: Defense Technical Information Center, sierpień 1990. http://dx.doi.org/10.21236/ada247572.
Pełny tekst źródłaMiller, R. J., i C. R. Sampson. Evaluation of Simple Mesoscale Models for Use in TESS. Fort Belvoir, VA: Defense Technical Information Center, listopad 1991. http://dx.doi.org/10.21236/ada247914.
Pełny tekst źródłaSolberg, Jason B. MIL-STD-1660 Tests on Tactical Explosive System (TEXS). Fort Belvoir, VA: Defense Technical Information Center, sierpień 1990. http://dx.doi.org/10.21236/ada257222.
Pełny tekst źródła