Gotowa bibliografia na temat „Teeth Abrasion”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Teeth Abrasion”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Teeth Abrasion"
Jakarta1, Ngatemi poltekkes, i Erna Sariana. "Hubungan Karakteristik dan Kebiasaan Menyikat Gigi dengan Kejadian Abrasi Gigi Pada Pegawai Yayasan Masjid Al-ikhlas Cilandak Jakarta". ARKESMAS (Arsip Kesehatan Masyarakat) 4, nr 2 (29.02.2020): 185–90. http://dx.doi.org/10.22236/arkesmas.v4i2.3746.
Pełny tekst źródłaNam, Jinsu, Duong Hong Nguyen, Seungjun Lee, Seok-Mo Heo i Junyoung Park. "Simulation of Non-Carious Cervical Lesions by Computational Toothbrush Model: A Novel Three-Dimensional Discrete Element Method". Sensors 22, nr 11 (31.05.2022): 4183. http://dx.doi.org/10.3390/s22114183.
Pełny tekst źródłaSharma, Eeshita, Manjit Kumar, Rohit Sharma, Ajay Bansal i Sumit Katoch. "Comparative Evaluation of Bond Strength between Ridge Lap Surface of Acrylic Teeth and Denture Base Resin: An In Vitro Study". Dental Journal of Advance Studies 07, nr 01 (28.03.2019): 012–18. http://dx.doi.org/10.1055/s-0039-1684881.
Pełny tekst źródłaFreitas, Karina Matthes de, i Helena de Freitas Oliveira Paranhos. "Weight loss of five commercially available denture teeth after toothbrushing with three different dentifrices". Journal of Applied Oral Science 14, nr 4 (sierpień 2006): 242–46. http://dx.doi.org/10.1590/s1678-77572006000400006.
Pełny tekst źródłaSubbotin, R. S., S. B. Fishchev, A. V. Lepilin, A. A. Kondratyuk i M. N. Puzdyreva. "Comparative characteristics of masticatory muscle tone in patients with compensated and decompensated increased teeth abrasion". Periodontology 24, nr 2 (29.04.2019): 150–56. http://dx.doi.org/10.33925/1683-3759-2019-24-2-150-156.
Pełny tekst źródłaMucić, Dinka, i Marija Đurić-Srejić. "Abrasion of Teeth in Population Groups from Historical Periods in the Region of Former Yugoslavia". Dental Anthropology Journal 11, nr 1 (7.09.2018): 7–10. http://dx.doi.org/10.26575/daj.v11i1.218.
Pełny tekst źródłaRazumova, S. N., Y. S. Kozlova, A. S. Brago, H. Barakat i A. S. Manvelyan. "Evaluation of the Roughness of the Enamel Surface According to Profilometry Data (Pilot Study)". Medical alphabet, nr 34 (13.01.2023): 14–18. http://dx.doi.org/10.33667/2078-5631-2022-34-14-18.
Pełny tekst źródłaMitic, Nadica, Aleksandar Mitic, Vladimir Mitic, Vojin Savic i Marija Nikolic. "Tooth macromorphological and ultrastructural analysis of osteological material from the medieval locality of St. Panteleimon Church in Nis". Srpski arhiv za celokupno lekarstvo 138, nr 11-12 (2010): 699–705. http://dx.doi.org/10.2298/sarh1012699m.
Pełny tekst źródłaKulkarni, Rahul S. "Esthetic and Functional Rehabilitation of a Patient with Abrasion, Attrition, and Missing Teeth". International Journal of Prosthodontics and Restorative Dentistry 4, nr 2 (2014): 52–55. http://dx.doi.org/10.5005/jp-journals-10019-1107.
Pełny tekst źródłaQiu, Chang Ming, Yan Feng Wang, Shu Ming Xing i Li Jun Guo. "The Failure Mechanism of Bucket Teeth of Electric Excavator Used in Metal Mine". Advanced Materials Research 580 (październik 2012): 185–88. http://dx.doi.org/10.4028/www.scientific.net/amr.580.185.
Pełny tekst źródłaRozprawy doktorskie na temat "Teeth Abrasion"
Chan, Kit-ping Cordelia, i 陳潔萍. "Comparing the effectiveness of a new innovative desensitizing paste to a home-used desensitizing toothpaste in reducing dentine hypersensitivity among Chinese adults". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/206444.
Pełny tekst źródłapublished_or_final_version
Dentistry
Master
Master of Philosophy
Wong, Tak-ying Anita, i 黃德瑩. "Oral health status and quality of life of children and adolescents with severe hypodontia". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B31954339.
Pełny tekst źródłaMuzilli, Marcelo 1972. "Efeito de metodos de polimento na rugosidade e dureza Vickers de ceramicas para cobertura". [s.n.], 2009. http://repositorio.unicamp.br/jspui/handle/REPOSIP/289567.
Pełny tekst źródłaTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-13T01:39:57Z (GMT). No. of bitstreams: 1 Muzilli_Marcelo_D.pdf: 34149055 bytes, checksum: 91212ba7ea6406d835e270899c5d9256 (MD5) Previous issue date: 2009
Resumo: O objetivo deste estudo foi avaliar o efeito do método de polimento na rugosidade e na dureza Vickers de doze cerâmicas utilizadas para cobertura, após serem submetidas ao desgaste abrasivo. Foram confeccionados quarenta discos de cada cerâmica, cor de esmalte, com 8 mm de diâmetro e 2 mm de espessura. O pó cerâmico de cada marca comercial (CERAMCO, CERCON, FINESSE, IPS D.SIGN, IPS ERIS, VINTAGE HALO, VISION, VISION ESTHETIC, VITA VM7, VITA VM9, VITA VM13 e WILL CERAM) foi aglutinado com o líquido modelador indicado e aplicado em uma matriz metálica bipartida. Após a sinterização e o esfriamento, os discos foram desgastados, simulando uma situação de ajuste oclusal, com ponta diamantada 3098 F e 3098 FF (KG Sorensen), e divididos em 4 grupos (n=10): Grupo P - polimento com abrasivos do sistema Shofu; Grupo PP - polimento com sistema Shofu + pasta diamantada (6 mm - KG SORENSEN); Grupo PG - polimento + glaze e Grupo G - glaze (Controle). Os corpos-de-prova foram levados ao rugosímetro Surf-Corder para mensuração da rugosidade de superfície, utilizando o parâmetro Ra. Foram feitas três mensurações em cada corpo-de-prova. A dureza Vickers foi efetuada no aparelho HMV-2 (Shimadzu), calibrado com carga de 9,8 N atuando por 15 segundos. Cinco penetrações foram feitas em cada corpo-de-prova e a média calculada. Os dados foram submetidos à Análise de Variância e ao teste de Tukey (5%) e mostraram que as cerâmicas Finesse, VM7, VM9, VM13 e IPS Eris não tiveram influência do método de polimento na dureza Vickers. Os menores valores de dureza Vickers foram obtidos pelas cerâmicas Vintage Halo e VM7 no grupo P; Cercon, Vintage Halo, VM9 e Ceramco no grupo PP; Cercon no grupo PG e Ceramco, Cercon, Will Ceram e Vision Esthethic no grupo G. Os métodos de polimento tiveram influência na rugosidade em todas as cerâmicas utilizadas. Os menores valores de rugosidade foram obtidas pelas cerâmicas VM9, VM13, VM7, IPS Eris, Ceramco e Vintage Halo, no grupo P; Will Ceram, VM7, VM13 e Vintage no grupo G e Will Ceram, VM7 e Vision no grupo PG. O grupo PP promoveu os menores valores de rugosidade não diferindo entre as cerâmicas utilizadas.
Abstract: The aim of this study was to evaluate the polish method influence on surface roughness and Vickers hardness number of the twelve dental ceramics, after abrasive grinding. Forty enamel ceramic disks with 8 mm in diameter and 2.0mm thickness were made. The ceramic powder for each brand (CERAMCO, CERCON, FINESSE, IPS D.SIGN, IPS ERIS, VINTAGE HALO, VISION, VISION ESTHETIC, VITA VM7, VITA VM9, VITA VM13 and WILL CERAM) was agglutinated with the appropriate modeling liquid and applied on a bipartite metallic matrix. After the sinterization and cooling, the disks were submitted to a simulation of oclusal adjustment with 3098 F and 3098 FF diamonds burs (KG SORENSEN), and divided into four groups (n=10): Group P - Shofu polishing system; Group PP - Shofu polishing system + diamond paste (6mm - KG SORENSEN); Group PG - Shofu polishing system + glaze; and, Group G - glaze (control). The roughness was measured on a Surf-Corder machine using Ra parameter. Three measurements were made for each specimen and the average calculated. The Vickers hardness number was measured with HMV 2 microhardness tester (Shimadzu), with a load of 9,8 N applied for 15 seconds. Five measurements were made for each specimen. The dates were submitted to ANOVA and Tukey's test (5%) and showed that only the ceramics FINESSE, VM7, VM9, VM13 and IPS ERIS weren't the influence of surface treatment on Vickers hardness. The lowers hardness values were obtained by Cercon, Vintage Halo and VM7, in group P; Cercon, Vintage Halo, VM9 and Ceramco in Group PP; Cercon, in Group PG; Ceramco, Cercon, Will Ceram and Vision Esthetic, in Group G. The roughness suffered the influence of the surface treatment in all the ceramics that were used. The lowers roughness values were obtained by VM9, VM13, VM7, IPS Eris, Ceramco and Vintage Halo, in Group P; Will Ceram, VM7, VM13 e Vintage in Group G and Will Ceram, VM7 e Vision in Group PG. The Group PP promoted the lowers roughness averages that didn't show any difference statistic among all the ceramics.
Doutorado
Materiais Dentarios
Doutor em Materiais Dentários
Logan, Murray. "Nutritional stresses and the feeding behaviour and activity patterns of free-ranging koalas (Phascolarctos cinereus : Goldfuss)". Monash University, School of Biological Sciences, 2003. http://arrow.monash.edu.au/hdl/1959.1/9593.
Pełny tekst źródłaTaylor, R. M. S. (Richard Morris Stovin), i n/a. "Anatomy and biology of tooth dislocation and wear in the pre-European Maori and Australian Aborigine : with supporting publications". University of Otago. School of Dentistry, 1991. http://adt.otago.ac.nz./public/adt-NZDU20070627.105619.
Pełny tekst źródłaShabanian-Borojeni, Mitra. "Wear studies of enamel and some restorative materials". Title page, contents and summary only, 2001. http://web4.library.adelaide.edu.au/theses/09PH/09phs5241.pdf.
Pełny tekst źródłaViana, Ítallo Emídio Lira. "Efeito dos desafios erosivo ou erosivo/abrasivo sobre as estruturas dentárias adjacentes às restaurações realizadas com materiais contendo fluoreto ou cálcio". Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/23/23134/tde-04042018-110822/.
Pełny tekst źródłaThis in vitro study evaluated the effect of erosive or erosive/abrasive challenges on restorative materials containing fluoride and calcium, and on the dental hard tissues adjacent to restorations performed with these materials. Enamel and dentin specimens (4 mm × 4 mm × 2 mm), obtained from bovine incisors, were embedded in acrylic resin, flattened and polished. In the specimens, a standard cavity of 1,2 mm × 4 mm × 1,5 mm was prepared and restored with the following materials: 1. Z350 - Composite resin without actives, Filtek Z350 (3MESPE); 2. VB - experimental composite containing barium glass only; 3. DCPD30% - experimental composite containing 10% of barium glass and 30% of DCPD particles functionalized with DEGDMA; 4. DCPD60% - experimental composite containing 60% of DCPD particles functionalized with DEGDMA; 5. Beautifil - GIOMER (Beautifil II, Shofu Dental Corporation); 6. Fuji IX - high viscosity glass ionomer (Fuji IX, GC Corporation); 7. Fuji II LC - resin-modified glass ionomer (Fuji II LC, GC Corporation). The specimens were polished again and then submitted to one of the two treatments: erosion only (n=10) or erosion plus toothbrushing abrasion (n=10). Erosion was performed by immersing the specimens in 0.3% citric acid solution (p~2.6), for 5 min, followed by 60 min exposure to artificial saliva. This procedure was repeated 4 times a day, for 5 days. Toothbrushing was performed with a slurry of a standard dentifrice (Colgate Total 12 Mint Clean; 1450 ppm F, as NaF), for 15 s (2 min total exposure time to the slurry), 2 times a day, 30 min after the first and last erosive challenges. At the end of cycling, enamel, dentin and restorative material surface loss (in ?m) were determined by optical profilometry. Data were analyzed by the Kruskal-Wallis and Tukey tests. The level of significance was 5%. In the erosion model, for enamel, both ionomeric cements presented lower surface loss than the Z350, although Fuji II LC did not differ significantly from Beautifil and DCPD30% groups. The other groups were no different from Z350 and from each other. For dentin, none of the groups were different from Z350, except for DCPD60%, which presented the highest surface loss. Both ionomeric cements presented lower loss than DCPD30%, Beautifil and DCPD60%. Regarding the restoration, the materials Z350, Beautifil, VB, DCPD30% showed minimal surface loss, with no differences between them. The ionomeric cements had the highest loss values, not differing from DCPD60%. In the erosion-abrasion model, for enamel, the lowest loss was observed for Fuji II LC, with no difference to Beautifil. The other groups showed no difference among them and from Beautifil. For dentin, the groups DCPD60%, Beautifil, Fuji II LC, Z350 and Fuji IX were no significant different and presented lower loss than VB. These five groups were also no different from DCPD30%, except Fuji IX. Regarding the restoration, the highest loss was observed for Fuji IX, with no difference from Fuji II LC and Beautifil. DCPD30%, Z350, VB and DCPD60% presented minimum values of surface loss, without differences between them. It was concluded that Fuji II LC ionomeric cement was the only material able to protect the enamel adjacent to the restoration against erosive and erosive/abrasive challenges, although it was one of the materials that was most susceptible to be wear off by both challenges. For dentin, no material exhibited a significant protective effect.
Mello, Pâmela Carbone. "Avaliação da resistência à abrasão, microdureza superficial e estabilidade de cor de dentes artificiais de resina acrílica". Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/58/58131/tde-28032008-174332/.
Pełny tekst źródłaThe objective of this work was to evaluate in vitro the abrasion resistance, the superficial microhardness and the color stability of acrylic resin artificial teeth. Seven groups (1-Biolux, 2 - Trilux, 3 - Blue Dent, 4 - Biocler, 5 - Orthosit-Vivodent, 6 - Postaris-Antaris, 7 - Gnathostar-Ivostar), composed of 12 upper premolar for each manufacturer\'s, being 6 against metallic antagonists (Ni-Cr) and 6 against indirect resin (Solidex) antagonists, were delineated in a perfilometer, before and after the abrasion test. The linear difference between the first and the second readings was measured with a digital calliper (0,01mm precision). After the statistical analysis (variance analysis, Tukey-Kramer\'s test, p<0.05), it was observed that there were significant differences among the groups and that the trademark Postaris presented the smallest wear values against both antagonists (R=2,33±0,91µm and M=1,78±0,42µm). For Vickers superficial microhardness, 6 lateral upper incisors of each mark and 3 readings were used (incisal, medium, and cervical thirds) done with the microdurometer. The averages of Vickers superficial microhardness were submitted to the statistical analysis (p<0.05) and the obtained results show that the group Biolux (22,1±0,91VHN) followed by Antaris (21,9±1,58VHN), Ivostar (21,1±0,98VHN) and Biocler (21,0±1,80VHN) presented higher values, differing from Vivodent (19,1±0,99VHN) and Blue Dent (18,9±1,54VHN), less harders. For the color stability test 6 upper right central incisors of each commercial mark were used (n=42), submitted to the accelerated artificial aging process. The apparel for color reading was a Portable Spectruncolorimeter Model Color Guide 45/0 (BYK-Gardner, Germany). Each tooth had his color read before and immediately after the artificial aging. The ΔE values were submitted to the statistical analysis with JMP 5.1 (HEALTHY Institute, USA) software and show that significant differences were found among the groups and that only Blue Dent (4,37±0,32) presented clinically unacceptable values of ΔE (ΔE>3.3). For the groups that had clinically acceptable color alterations, the Antaris/Postaris group had the largest color variation (ΔE=2.73±0.96) and the Biolux group presented to smallest color variation (ΔE=1.39±0.27). Within the limitations of the methodology, was concluded that the antagonist (metal or resin) influence the choice of the artificial tooth, and that the tested artificial teeth have different behaviors for the abrasion resistance, superficial microhardness and color stability.
Correr-Nolasco, Gisele Maria. "Degradação de materiais restauradores resinosos e do esmalte deciduo e permanente em soluções simuladoras da dieta". [s.n.], 2007. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288592.
Pełny tekst źródłaTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba
Made available in DSpace on 2018-08-08T10:33:11Z (GMT). No. of bitstreams: 1 Correr-Nolasco_GiseleMaria_D.pdf: 6596776 bytes, checksum: 63d7c0e65d2597ab8ee9132bae660714 (MD5) Previous issue date: 2007
Resumo: A cavidade bucal é considerada um ambiente agressivo onde a estrutura dentária e os materiais restauradores estão constantemente sujeitos a desafios térmicos, mecânicos e quÃmicos. A associação destes fatores está diretamente relacionada à longevidade/estabilidade das restaurações, bem como à preservação da estrutura dentária. A exposição da estrutura dentária e dos materiais restauradores resinosos aos agentes da dieta pode causar erosão dental, amolecimento e aumento da rugosidade de restaurações resinosas, deixando-as mais susceptÃveis ao desgaste. Dessa forma, os objetivos desta tese fundamentada em três capÃtulos foram: (1) avaliar o efeito do armazenamento em longo prazo em diferentes soluções simuladoras da dieta na rugosidade superficial de materiais restauradores resinosos; (2) avaliar o efeito da associação dos desafios erosivo e abrasivo no desgaste do esmalte decÃduo e permanente; (3) avaliar o efeito da associação dos desafios corrosivo e abrasivo no desgaste de materiais restauradores resinosos. No capÃtulo 1, sessenta amostras de diferentes materiais restauradores (Filtek Z250, Esthet X, Filtek Flow, Dyract AP e Vitremer) foram armazenadas em 5 lÃquidos simuladores da dieta (água destilada, ácido lático, ácido cÃtrico, refrigerante a base de cola (Coca-Cola) e álcool) por até 6 meses. A rugosidade superficial das amostras foi mensurada após o polimento (baseline), 1 semana, 1 mês, 3 meses e 6 meses de armazenamento. Houve aumento significativo na rugosidade superficial apenas para Esthet X armazenado em Coca-Cola e em ácido cÃtrico após 1 e 3 meses, respectivamente; e para Dyract AP armazenado em água destilada após 6 meses. No capÃtulo 2, foram obtidas amostras planas de esmalte decÃduo e permanente (n=10), as quais foram submetidas ao desgaste (100.000 ciclos a 1,9 Hz) em meio neutro (água deionizada) e meio ácido (ácido cÃtrico). Antes e após o desgaste, as amostras foram analisadas em perfilÃ'metro (MTS 3D Profiler). A alteração do volume e a profundidade máxima do desgaste foram quantificadas utilizando o software Ansur 3D. O esmalte decÃduo apresentou maior desgaste que o esmalte permanente, independentemente do meio. O meio ácido proporcionou maior desgaste do que o meio neutro (p<0,05). Diferença significativa entre meio neutro e ácido foi observada apenas para o esmalte decÃduo. No capÃtulo 3, dez amostras de cada material [Filtek Supreme (S), Point 4 (P), Dyract AP (D) e Fuji II LC (F)] foram confeccionadas e submetidas ao desgaste (100.000 ciclos a 1,9 Hz) em meio neutro (água) e meio ácido (ácido cÃtrico). Antes e após o desgaste, as amostras foram analisadas em perfilÃ'metro (MTS 3D Profiler). A alteração do volume e a profundidade máxima do desgaste foram quantificadas utilizando o software Ansur 3D. Diferença significativa no desgaste dos materiais foi observada (S=P
Materiais Dentarios
Doutor em Materiais Dentários
ADACHI, LENA K. "Estudo in vitro do desgaste do esmalte dental pelos materiais restauradores utilizando metodo radiometrico". reponame:Repositório Institucional do IPEN, 2000. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10811.
Pełny tekst źródłaMade available in DSpace on 2014-10-09T14:07:43Z (GMT). No. of bitstreams: 1 06896.pdf: 4262092 bytes, checksum: a107ec0ad6ce79bad3021b2d96ac0cc6 (MD5)
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Dissertacao [Mestrado]
IEA/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
FAPESP:98/01953-0
Książki na temat "Teeth Abrasion"
Wahome, E. W. The significance of dental attrition in the reconstruction of prehistoric diets: A general review. [Nairobi]: University of Nairobi, Dept. of History, 1989.
Znajdź pełny tekst źródłaIncremental structures and wear patterns of teeth for age assessment of red deer. Oxford: Archaeopress, 2008.
Znajdź pełny tekst źródłaEnamel microabrasion. Chicago: Quintessence Pub. Co., 1991.
Znajdź pełny tekst źródłaMashloosh, K. M. Abrasive wear with particular reference to digger teeth. Uxbridge: Brunel University, 1987.
Znajdź pełny tekst źródłaDental Microwear in Natufian Hunter-Gatherers and Pre-Pottery Neolithic Agriculturalists from Northern Israel. Not Avail, 2005.
Znajdź pełny tekst źródłaAn introduction to pet dental care: for veterinary nurses and technicians. Wallingford: CABI, 2021. http://dx.doi.org/10.1079/9781789248869.0000.
Pełny tekst źródłaCzęści książek na temat "Teeth Abrasion"
Istace, Kathy. "If it's broke, fix it! Tooth fractures, discoloured teeth, abrasion and attrition." W An introduction to pet dental care: for veterinary nurses and technicians, 80–101. Wallingford: CABI, 2021. http://dx.doi.org/10.1079/9781789248869.0004.
Pełny tekst źródłaLivaditis, Joanne M., i Gus J. Livaditis. "The Use of Custom-Milled Zirconia Teeth to Address Tooth Abrasion in Complete Dentures". W Journal of Prosthodontics on Complex Restorations, 205–13. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119274605.ch28.
Pełny tekst źródłaWatanabe, Koji, Shigeru Watanabe i Kenshi Maki. "When to Brush Teeth after Single Short Time Intake of Carbonated Soft Drink to Prevent Enamel Abrasion?" W Highlights on Medicine and Medical Research Vol. 1, 8–12. Book Publisher International (a part of SCIENCEDOMAIN International), 2021. http://dx.doi.org/10.9734/bpi/hmmr/v1/6928d.
Pełny tekst źródłaKilpatrick, N. M., i L. A. L. Burbridge. "Advanced restorative dentistry". W Paediatric Dentistry. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198789277.003.0019.
Pełny tekst źródłaKemp, T. S. "6. Herbivorous mammals". W Mammals: A Very Short Introduction, 65–81. Oxford University Press, 2017. http://dx.doi.org/10.1093/actrade/9780198766940.003.0006.
Pełny tekst źródłaGutsalenko, Yuriy, i Tetyana Tretyak. "FORMATION OF WORKING SURFACES AND RESEARCH OF QUALITATIVE INDICATORS OF NON-EVOLVENT GEARS (REVIEW AND PROSPECTS OF DEVELOPMENT)". W Integration of traditional and innovation processes of development of modern science. Publishing House “Baltija Publishing”, 2020. http://dx.doi.org/10.30525/978-9934-26-021-6-35.
Pełny tekst źródłaStreszczenia konferencji na temat "Teeth Abrasion"
Vakhovskyi, V. V., V. Yu Filimonov, S. O. Filimonova, O. V. Androshchuk i O. V. Shypytsyna. "Air abrasive method of preparation of hard tissues of teeth in the treatment of caries". W THE CONCEPT OF MODERN PHARMACY AND MEDICINE IN UKRAINE AND EU COUNTRIES. Baltija Publishing, 2021. http://dx.doi.org/10.30525/978-9934-26-113-8-20.
Pełny tekst źródłaSuryo, S. Hadi, A. P. Bayuseno, J. Jamari i Muhammad Arief Rahmat Ramadhan. "Analysis of AISI material power of AISI 4140 bucket teeth excavator using influence of abrasive wear". W HUMAN-DEDICATED SUSTAINABLE PRODUCT AND PROCESS DESIGN: MATERIALS, RESOURCES, AND ENERGY: Proceedings of the 4th International Conference on Engineering, Technology, and Industrial Application (ICETIA) 2017. Author(s), 2018. http://dx.doi.org/10.1063/1.5042942.
Pełny tekst źródłaWang, Zegui, Xiaopeng Xie i Jianhua Zhang. "Experimental Study on Running-In of Steel Gear Pairs With Micro- and Nano-Materials". W 2007 First International Conference on Integration and Commercialization of Micro and Nanosystems. ASMEDC, 2007. http://dx.doi.org/10.1115/mnc2007-21121.
Pełny tekst źródłaRaporty organizacyjne na temat "Teeth Abrasion"
MALDONADO, KARELYS, JUAN ESPINOZA, DANIELA ASTUDILLO i WILSON BRAVO. Fatigue and fracture resistance and survival of occlusal veneers of composite resin and ceramics blocks in posterior teeth with occlusal wear: A protocol for a systematic review. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, październik 2021. http://dx.doi.org/10.37766/inplasy2021.10.0036.
Pełny tekst źródła