Rozprawy doktorskie: „Technology implementation”

1

Scalbi, Jacopo. "NexTower technology & implementation". Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amslaurea.unibo.it/21525/.

Pełny tekst źródła

Streszczenie:

Il mondo del traffico aereo è sempre stato soggetto a criticità per la sua natura in termini di responsabilità e in quanto organizzazione ad alta affidabilità, il cui obiettivo è raggiungere l'errore zero; l’Ente Nazionale per l'Assistenza al Volo è alla continua ricerca di un metodo che possa avvicinare sempre più a tale risultato. Analizzando la storia del traffico aereo e le tecnologie sviluppate nell’ultimo secolo, arriviamo alla nascita di un valido strumento, nato negli ultimi anni, per aeroporti con un intenso traffico aereo: NexTower. L’obiettivo di questo studio è valutare, analizzando il metodo di funzionamento, la sua tecnologia, il rapporto costi-benefici e la sua implementazione su aeroporti già dotati di essa, se e come NexTower riesca effettivamente a rispondere a questa problematica e ad avvicinare il mondo del traffico areo all’errore zero. Grazie al materiale fornito dal dott. Matteo Ergotti, esperto dell'argomento, all’analisi di un precedente incidente, e alle ricerche fatte nei siti preposti del mondo dell’aviazione civile, le risposte alle quale siamo giunti ci hanno mostrato come NexTower possa effettivamente incrementare la Situational Awareness, cioè la consapevolezza del controllore di cosa sta succedendo intorno a lui, attraverso l’uso di un sistema digitalizzato, che consente una presentazione situazionale avanzata e, in generale, una digitalizzazione del processo che permette al controllore di avere informazioni inequivocabili e di qualità. Su questa base, l’implementazione di NexTower è consigliata anche su ulteriori aeroporti facendo un’analisi costi benefici, in quanto la tecnologia ha un costo e questo è un ottimo strumento per problematiche legate ad aeroporti con elevato numero di traffici e in torri di controllo con una complessa linea operativa, dove la comunicazione tra controllori diventa sempre più difficile.

Style APA, Harvard, Vancouver, ISO itp.

2

Galla, Anthony James. "Educational Technology: Leadership and Implementation". Digital Commons at Loyola Marymount University and Loyola Law School, 2009. https://digitalcommons.lmu.edu/etd/257.

Pełny tekst źródła

Streszczenie:

The purpose of this study was to evaluate two important aspects of educational technology: leadership and implementation. The research conducted in this study aimed to assess three aspects of leadership as it relates to educational technology: leadership that supports the technology implementation process, leadership that supports the change associated implementing technology, and leadership that supports a culture that embraces technology. An additional purpose of this study was to evaluate the process, procedures, and actions of implementing educational technology at three Catholic elementary schools in ways that foster a culture that promotes a supportive disposition towards educational technology. The data from the interviews, document reviews, and site observations revealed that leadership styles and practices that support the adaptation to change and a culture that can embrace technology are vital to the educational technology implementation process. This study confirmed literature that contends that partnership, collaboration, and ownership from all stakeholders are essential conditions in being able to cultivate change and sustain a culture that embraces technology. In addition, this study identified and discusses the significance of effective educational technology leaders, professional development, the establishment of a vision, mission, and plan, proper technology maintenance, and the idea that technology is a resource that is meant to enhance rather than replace teaching and instruction.

Style APA, Harvard, Vancouver, ISO itp.

3

Shattuck, Dominick. "Technology Implementation in the Classroom". NCSU, 2006. http://www.lib.ncsu.edu/theses/available/etd-05182006-145752/.

Pełny tekst źródła

Streszczenie:

The purpose of this research was to examine the relationship between teachers? attitudes toward technology and its implementation while their schools are undergoing a large-scale technology infusion in the state of North Carolina. The eleven treatment schools were selected through a grant writing procedure, high technology needs and Title I status. A detailed procedure was used to identify and recruit comparison schools. Treatment schools were provided with almost $1.5 million over three years to purchase educational technology, train their teachers and staff two full-time technology related positions: Media Coordinator and Technology Facilitator. In addition, schools were required to develop and integrate a Media Technology Advisory Committee (MTAC) to oversee planning and budgeting issues related to technology. Utilizing a quasi-experimental pre-post design, this study analyzed teacher attitude changes for treatment and comparison groups over year-one. Attitude and instructional practices were compared with pre-measure data to assess a baseline comparison of groups. Changes in group scores over time were conducted using RMANCOVA and differences were found between groups for two attitude subscales and for four instructional practices. The largest effect was found for technology implementation. Exploratory hierarchical regression analyses were conducted to assess the predictive relationship between attitude subscales and technology implementation. Only teachers? Affective Reaction to Computers had a significant relationship with Technology Implementation.

Style APA, Harvard, Vancouver, ISO itp.

4

Carey, David R. "Information technology : attitudes and implementation". Thesis, Massachusetts Institute of Technology, 1988. http://hdl.handle.net/1721.1/14534.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Boyer, Kenneth K. "Patterns of advanced manufacturing technology implementation : technology and infrastructure". The Ohio State University, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=osu1272480607.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Boyer, Kenneth Karel. "Patterns of advanced manufacturing technology implementation : technology and infrastructure /". The Ohio State University, 1994. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487858417984099.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Meyer, David C. "Climate for Computer-Mediated Communication Technology Implementation and Implementation Success". NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20010119-154920.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Savioz, Pascal. "Technology intelligence in technology-based SMEs : conceptual design and implementation /". Zürich : Verl. Industrielle Organisation, 2002. http://www.gbv.de/dms/zbw/349776881.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Beaumaster, Suzanne. "Information Technology Implementation Issues: An Analysis". Diss., Virginia Tech, 1999. http://hdl.handle.net/10919/27177.

Pełny tekst źródła

Streszczenie:

This research project addresses the issues affecting information technology development and deployment. The issues represented in this study are addressed in the context of IT implementation processes, especially with regard to the question of the needs and perceptions of administrators from the local government arena. In addition, this study will provide an exploratory look at the problematic issues surrounding IT implementation and how local government administrators--in particular--perceive them. More specifically, this study provides the following: a discussion of management and organizational issues that have a direct relationship to IT and local government implementation needs; a discussion of the problems which are specific to local government executives with regard to IT implementation; a comprehensive view of the overriding problems associated with the IT development and deployment process in local government; descriptive data revealing local government executiveâ s perceptions about the issues surrounding IT development processes; and a basis for development of an IT implementation framework for local government. Each of these provisions is integral to developing a comprehensive understanding of the problems associated with the planning, acquisition, and implementation of ITs in local government. These provisions lay the foundations for future development of an IT implementation framework for local government. The research in this study suggests that there are three primary results, which are shown here. The first is thatâ strategic planning for IT is fundamental to the ultimate effectiveness of IT implementation. Planning with regard to IT acquisition and deployment has proven to be a difficult accomplishment regardless of organization type or sector. This study specifically addresses many of the issues surrounding this problem, as it is integral to the implementation process as a whole. Secondly, it is shown that interdepartmental coordination has proven to be a major factor in effective IT implementation. Previous studies in this area have shown a propensity over the course of the development of IT towards decentralization of the acquisition and management of technologies. This trend speaks directly to the issue of interdepartmental coordination and the difficulties local government managers face when attempting to implement ITs in their organizations. Finally, it is shown that the expertise levels of executives with regard to IT has proven to be a contributing factor to effectiveness of the IT development and deployment process.
Ph. D.

Style APA, Harvard, Vancouver, ISO itp.

10

Fu, Ping 1964. "China's science & technology policy and the implementation of technology transfer". Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=31108.

Pełny tekst źródła

Streszczenie:

China's scientific development has gone through several phases over the past 50 years. In 1956, the first generation of leaders called on the whole country to "march towards science," drafting China's first scientific development plan. In 1978, the then Chinese leaders sponsored a national science conference and mapped out scientific development strategies for a new period of reform and opening-up policies. In 1985, the central government issued a "Decision on the Reform of Scientific and Technological Systems," with the aim of accelerating the application of technological discoveries to promote productivity. Since then, China has implemented a series of projects to spur the take-off of the rural economy. In 1995, at a national conference on science and technology, the Chinese leaders put forward the strategy of "revitalizing the country through science, technology and education." The central government listed this strategy along with the policy of sustainable development as the basic principles for China's long-term economic and social development. (Abstract shortened by UMI.)

Style APA, Harvard, Vancouver, ISO itp.

11

Bucher, Philip Eugen. "Integrated technology roadmapping design and implementation for technology-based multinational enterprises /". [S.l.] : [s.n.], 2003. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=14995.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Johnson, Marcus Cullen. "Implementation of a manufacturing technology roadmapping initiative". Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/74920.

Pełny tekst źródła

Streszczenie:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering; and, (M.B.A.)--Massachusetts Institute of Technology, Sloan School of Management; in conjunction with the Leaders for Global Operations Program at MIT, 2012.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 93-95).
Strategic technology planning is a core competency of companies using technological capabilities for competitive advantage. It is also a competency with which many large companies struggle due to the cross-functional knowledge that needs to be shared, the varying perspectives that must to be aligned, the complicated network of dependencies that need to be understood and the high-degree of uncertainty involved in technology planning. Technology roadmapping has proven to be an effective strategic technology planning technique that can overcome these challenges. This thesis reviews literature on technology roadmapping and expands on this literature by applying these techniques to roadmapping the manufacturing technology. While the existing literature largely focuses on roadmapping the technologies that will directly deliver value to the customers, this thesis focuses on the technologies that indirectly deliver value to the customer. In an advanced products company, examples of the former and latter technologies are the product and manufacturing technologies, respectively. This distinction has important implications for the management of these technologies. Technology roadmapping is a powerful and flexible technique that must be tailored to the strategic context where it will be implemented. Through a case study of the development and implementation of manufacturing technology roadmapping at Raytheon Space and Airborne systems, the author seeks to provide a general set of guidelines for roadmapping a company's technology that indirectly add value to the customer.
by Marcus Cullen Johnson.
M.B.A.
S.M.

Style APA, Harvard, Vancouver, ISO itp.

13

Dou, Jie. "Evaluating Microsoft .NET technology: Implementation online store". CSUSB ScholarWorks, 2006. https://scholarworks.lib.csusb.edu/etd-project/3060.

Pełny tekst źródła

Streszczenie:

The purpose of this project is to design, develop and implement an e-commerce shopping cart system based on Microsoft.NET technology and to evaluate ASP.NET technology by developing a shopping cart system.

Style APA, Harvard, Vancouver, ISO itp.

14

Mandaza, Mapesa Nixjoen. "Health Information Technology Implementation Strategies in Zimbabwe". ScholarWorks, 2016. https://scholarworks.waldenu.edu/dissertations/2452.

Pełny tekst źródła

Streszczenie:

The adoption rate of health information technology (HIT) remains low in developing countries, where healthcare institutions experience high operating costs and loss of revenue, which are related to systems and processes inefficiency. The purpose of this case study was to explore strategies leaders in Zimbabwe used to implement HIT. The conceptual framework of the study was Davis's technology acceptance model (TAM). Data were gathered through observations, review of organizational documents (i.e., policies, procedures, and guidelines), and in-depth interviews with a purposive sample of 10 healthcare leaders and end-users from hospitals in Zimbabwe who had successfully implemented HIT. Transcribed interview data were coded and analyzed for emerging themes. Implementation strategies, overcoming barriers to adoption, and user acceptance emerged as the themes most healthcare leaders associated with successful HIT projects. Several subthemes also emerged, including: (a) the importance of stakeholder involvement, (b) the importance of management buy-in, and (c) the low level of IT literacy among healthcare workers. The strategies identified in this study may provide a foundation on which healthcare leaders in developing countries can successfully adopt and implement HIT. The recommendations from this study could lead to positive social change by providing leaders with knowledge and skills to use information technology strategies to deliver better healthcare at lower costs while creating employment for local communities.

Style APA, Harvard, Vancouver, ISO itp.

15

Vorobiyenko, Petro, i Victor Tikhonov. "Integrated telecommunication technology UA-ITT implementation perspectives". Thesis, ВНТУ, 2014. http://ir.lib.vntu.edu.ua/handle/123456789/4558.

Pełny tekst źródła

Streszczenie:

This paper focuses the Next Generation Networks (NGN) challenges along with implementation perspectives of advanced Integrated Telecommunication Technology made in Ukraine (UA-ITT). The UA- ITT introduces a sophisticated method of dynamic digital flow control to meet high QoS-demands and to benefit both packet- and circuit-switching techniques in a converged telecommunication network.
Даний матеріал висвітлює проблеми мереж наступних поколінь (NGN) та перспективи впровадження новітньої інтегрованої технології телекомунікацій, яка розроблена в Україні (UA- ITT). Технологія UA-ITT запроваджує сучасний метод динамічного управління цифровими потоками для підтримки високих вимог якості обслуговування та об’єднує достоїнства техніки комутації пакетів і комутації каналів у конвергентній телекомунікаційній мережі.

Style APA, Harvard, Vancouver, ISO itp.

16

Dautbegovic, Dino. "Chirp Sounding and HF Application : SDR Technology Implementation". Thesis, Linnéuniversitetet, Institutionen för datavetenskap, fysik och matematik, DFM, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-20096.

Pełny tekst źródła

Streszczenie:

From a HF propagation point of view, the ionospheric layers act as partially conducting media (plasma) in which a transmitted radio wave can reflect upon.A way of determining whether a radio wave with a given frequency will reflect from the ionosphere or completely penetrate is to utilize special radar instruments know as ionosondes or chirp sounders. The technique is widely used by amateur enthusiasts and military radio users for monitoring available radio channel links between two remote locations and can often serve as a base for HF radio prognoses.The objective of this Bachelor’s Thesis was to explore, implement and test a single channel receiver for monitoring ionospheric sounders. The implementation is based on Software Defined Radio (SDR) technology and relies on the GNU Chirp Sounder (gcs) open source script program.

Style APA, Harvard, Vancouver, ISO itp.

17

Sun, Zheng 1976. "The link level security implementation of bluetooth technology /". Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33849.

Pełny tekst źródła

Streszczenie:

Bluetooth technology is a de facto global standard for a short-range, low-power and low-cost form of wireless communication. New as it is, the technology is anticipated to play a very important role in an increasingly mobile world.
Like almost any other modern communication technology, Bluetooth must be sufficiently secure before it can be widely accepted. This is particularly challenging for Bluetooth due to the fact that it uses radio as the physical communication media. The nature of microwave links, as opposed to fixed cable connections, means that Bluetooth is especially vulnerable to attacks. However, through the use of some well-known and highly-effective cryptographic algorithms, Bluetooth is able to achieve the three most important security goals: secrecy, authenticity and integrity.
The focus of the thesis is how Bluetooth translates the theoretical cryptographic techniques into effective real life implementations. Security measures in Bluetooth are taken at both the application level and the link level. In the thesis, the author places the emphasis on the link level measures. Various security areas are discussed, such as random number generation, key management, encryption, authentication, etc. The limitations and weaknesses of Bluetooth security implementations are also discussed, and some suggestions for future improvements are offered.

Style APA, Harvard, Vancouver, ISO itp.

18

Aljuaied, Ali M. "Bluetooth technology and its implementation in sensing devices". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2001. http://handle.dtic.mil/100.2/ADA397232.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Duursema, N. L. P. "Implementation of the Balanced Scorecard at SASOL Technology". Thesis, Stellenbosch : Stellenbosch University, 2001. http://hdl.handle.net/10019.1/16478.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Pagette, Francois Carleton University Dissertation Engineering Electronics. "Implementation of a double-poly bipolar transistor technology". Ottawa, 1994.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Gerwin, Howard R. (Howard Ross) 1964. "A system dynamics study of technology strategy implementation". Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/88325.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Garber, Robert A. (Robert Andrew) 1973. "Implementation of new technology in a regulated environment". Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/34740.

Pełny tekst źródła

Streszczenie:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering; and, (M.B.A.)--Massachusetts Institute of Technology, Sloan School of Management; in conjunction with the Leaders for Manufacturing Program at MIT, 2004.
Includes bibliographical references (leaves 84-85).
This thesis investigates potential improvements to the manufacturing process through the implementation of process analytical technologies (PAT) in the heavily regulated pharmaceutical industry. The thesis focuses on the identification, prioritization, evaluation, and implementation of Process Analytical Technologies (PAT's) to solve manufacturing issues. While full implementation of a solution is not a part of this thesis, development of an implementation plan is. In parallel to executing these four stages of the project, processes and tools for the assessment of future PAT ideas are developed. The ideas developed in this thesis were tested in an industrial setting, and several case studies are included from this work. Key results are that a rigorous business evaluation of a potential project from a financial and intangible viewpoint is necessary, that PAT can improve the efficiency of a manufacturing process both at the unit operation and entire system levels, and that the organizational structure of a pharmaceutical company and the regulatory authority will have to change in order to support the integration of PAT into the manufacturing plant. Ramifications of the new technology on the organization are presented along with recommendations for organizational change to better utilize PAT.
by Robert A. Garber.
M.B.A.
S.M.

Style APA, Harvard, Vancouver, ISO itp.

23

Mantena, Anup V. (Anup Verma) 1977. "Technology Enabled Active Learning : system architecture & implementation". Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/84307.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Huang, Jiangwei. "Methodology Study for Sealing Technology of Robotic Implementation". Thesis, KTH, Maskinkonstruktion (Inst.), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-183515.

Pełny tekst źródła

Streszczenie:

This thesis is based upon one project, STEP (Sealing Technology – Enhanced Properties), inside ABB Corporate Research, Sweden, which is aiming to study the sealing technology of robotic implementation by a scientific/systematic approach. Nowadays the radial lip seal can be found in many fields such as automobiles, aero-planes, and marines, etc., and they have evolved into different designs and materials for the past several decades. Most of them are designed for conventional applications like cars, in which the shaft usually works in continuous rotary motions, and with such conditions lip seals could normally function well due to the sealing mechanism. However, regarding the robotic application, in which the shaft typically works in bi-directional and intermittent motions, the lip seal may not perform ideally and sometimes cause additional leakage. Hence, this thesis is mainly focused on an experimental approach to study the lip seal performance with controlled parameters, especially the robotic motion, together with other parameters, such as oil, temperature, pressure, etc. The work includes literature survey of lip seals, specifying the test rig, building the test rig, developing a leakage detection system, carrying out benchmark tests and seal tests with different robotic motions.
Detta examensarbete är baserat på ett så kallat STEP-projekt (Tätningsteknik – förstärkande egenskaper), inom ABB Corporate Research i Sverige, med syftet att studera tätningsteknik för robottillämpningar på ett vetenskapligt/systematiskt sätt. I dagsläget används radiella läpptätningar inom många områden, såsom fordons-, flyg- och fartygsindustri. Under de senaste decennierna har den vidareutvecklats och är nu gjord av flera olika material. De flesta är utformade för konventionella tillämpningar, som exempelvis fordon. Där arbetar axeln vanligen imedkontinuerligt roterande rörelser, och vid sådana förhållanden kan läpptätningar normalt fungera väl. Men när det gäller robottillämpningar, där axeln typiskt arbetar i dubbelriktade och intermittenta rörelser, fungerar läpptätningen inte idealt och kan även ge oönskat läckage. Detta examensarbete är fokuserat på att utveckla en experimentell metod för att studera läpptätningars prestanda med väl kontrollerade parametrar, såsom oljans egenskaper, temperatur, tryck, o.s.v. I arbetet ingår litteraturstudie av läpptätningar, specificering av testrigg, byggande av testrigg, utveckling av ett system för att detektera läckage, utförande av benchmark-tester, samt tätningsprov för olika robotrörelser.

Style APA, Harvard, Vancouver, ISO itp.

25

Morelock, Joseph Stephen. "Effective Technology Implementation in Schools| Differing Perceptions of Teachers, Administrators, and Technology Staff". Thesis, Portland State University, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=3742845.

Pełny tekst źródła

Streszczenie:

This study examined the connection between perceptions of teacher self-efficacy, professional development, and leadership practices and attitudes as it relates to successful implementation of technology for student learning in K-12 schools. As external pressures exhort schools to transform the learning environment and to include more meaningful applications of technology in the learning experiences for all students, issues which create barriers to a successful implementation of new practices must be examined.

This study examined the responses of teachers, school and district administrators, and technology support personnel in a stratified random sample from 37 school districts in the state of Oregon to analyze the combined effects of teacher self-efficacy perceptions, leadership practices, and professional development as they relate to the implementation of classroom educational technology.

The study revealed perceptual differences between staff roles of what teachers know about technology and how they use technology. School contexts, such as percentages of disadvantaged or non-White students, and teacher factors, such as age and gender, affected participant perception of technology implementations and of professional development opportunities.

The researcher proposes a new framework for understanding school contexts and for planning successful technology implementations based upon a review of literature and original research.

Style APA, Harvard, Vancouver, ISO itp.

26

Nordlöv, Per. "Implementation Aspects of Image Processing". Thesis, Linköping University, Linköping University, Computer Vision, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-54365.

Pełny tekst źródła

Streszczenie:

This Master's Thesis discusses the different trade-offs a programmer needs to consider when constructing image processing systems. First, an overview of the different alternatives available is given followed by a focus on systems based on general hardware. General, in this case, means mass-market with a low price-performance-ratio. The software environment is focused on UNIX, sometimes restricted to Linux, together with C, C++ and ANSI-standardized APIs.

Style APA, Harvard, Vancouver, ISO itp.

27

Aldhahyani, Ammar. "Implementation of FaDO in React.js : Implementation of FaDO in React.js". Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-438670.

Pełny tekst źródła

Streszczenie:

This report describes the implementation of FaDO as a REACT.JS web-based tool. FaDO is a machine learning method for real-time fraud detection: it flags (financial)transactions as either fraudulent or normal in a real-time fashion. FaDO implementssemi-supervised machine learning for this task: in semi-supervised learning, only a small portion of the presented data needs to be labeled. This tool is designed as a filter that works together both with existing automatic fraud filters and human experts. The contribution of this work is a dynamical webpage that implements and demonstrates the approach. Herefore, the REACT framework and the JSX programming language were used. The emphasis of this tool is put on real-time in-browser processing of all data. In order to illustrate the tool, a realistic artificial transaction generator was implemented. The tool then allows to organise different fraud filters to select fraudulent transactions from this high-frequency stream. This report gives also preliminary key performance indicators (KPIs) of the approach. A comparison to a realistic hand-crafted expert system is given.

Style APA, Harvard, Vancouver, ISO itp.

28

Steele, Darby Eckman. "Factors Influencing Degree of Implementation of Technology in a Georgia High School". ScholarWorks, 2017. https://scholarworks.waldenu.edu/dissertations/4685.

Pełny tekst źródła

Streszczenie:

Based on an external school review, a large suburban high school outside a southeastern United States metropolitan area was not in compliance with state technology standards. The school leadership team concluded that because teachers were not effectively integrating technology for teaching, student achievement may have been negatively influenced. The purpose of this nonexperimental project study was to measure relationships among factors influencing degree of implementation of technology (ITC) in the classroom using Dewey's experiential theory with an emphasis upon constructivism as a theoretical framework. A modified survey, Technology and Professional Development Survey of Georgia High School Teachers, was distributed to all teachers in the local school (N = 109). The 8 research questions addressed the relationship between the dependent variable, Degree of ITC, and the independent variables: teacher disposition, instructional support, availability of technology, teacher collaboration, access and use of computers at home, teacher's level of education, number of years of teaching experience, and teacher participation in the Georgia Technology Initiatives. Using multiple regression and Chi-Square analysis, this quantitative investigation identified significant relationships between degree of ITC and both teacher disposition (B = .279, r = .473, p = .002) and instructional support (B = .249, r = .403, p = .012). These findings lead to professional development for increasing the use of technology for improving compliance with state technology standards, thus promoting positive social change through improved teaching and learning.

Style APA, Harvard, Vancouver, ISO itp.

29

Moore, Julia Marie. "Virginia Technology Education Teachers' Implementation of Standards for Technological Literacy". Diss., Virginia Tech, 2007. http://hdl.handle.net/10919/29620.

Pełny tekst źródła

Streszczenie:

The International Technology Education Association published Standards for Technological Literacy (STL) to assist technology educators in establishing curriculum to reflect technological literacy. Presently, the extent to which STL and the individual Standards are being used is not known. The problem of this study was to determine the extent to which Virginia secondary technology education teachers are implementing STL. A questionnaire was sent to 285 randomly selected Virginia secondary technology education teachers seeking information concerning their use of STL, their use of the individual Standards within STL, and their perceptions with regard to Rogersâ five attributes of innovation. Frequencies and percentages were calculated to describe the population and the respondentsâ perception of implementation of the individual Standards with regard to Rogersâ attributes of and innovation. A two way contingency table was used to evaluate the relationship between Rogersâ attributes of innovation and the implementation of individual Standards. Twenty percent of the respondents use STL with varying percentages for each individual Standard. These identified relationships may be used to assist change agents in understanding respondentsâ perceptions and assisting them in further implementing STL in Virginia.
Ph. D.

Style APA, Harvard, Vancouver, ISO itp.

30

Grogan, D. Michael. "Information Technology Implementation Decisions to Support the Kentucky Mesonet". TopSCHOLAR®, 2010. http://digitalcommons.wku.edu/theses/171.

Pełny tekst źródła

Streszczenie:

The Kentucky Mesonet is a high-density, mesoscale network of automated meteorological and climatological sensing platforms being developed across the commonwealth. Data communications, collection, processing, and delivery mechanisms play a critical role in such networks, and the World Meteorological Organization recognizes that “an observing system is not complete unless it is connected to other systems that deliver the data to the users.” This document reviews the implementation steps, decisions, and rationale surrounding communications and computing infrastructure development to support the Mesonet. A general overview of the network and technology-related research is provided followed by a review of pertinent literature related to in situ sensing network technology. Initial infrastructure design considerations are then examined followed by an in-depth review of the Mesonet communications and computing architecture. Finally, some general benefits of the Mesonet to the citizens of Kentucky are highlighted.

Style APA, Harvard, Vancouver, ISO itp.

31

Asnawi, Amrullah. "Intranet implementation in a context of Web technology discovery". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1999. http://handle.dtic.mil/100.2/ADA361114.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Information Technology Management) Naval Postgraduate School, March 1999.
Thesis advisor(s): William J. Haga, Chris Eagle. "March 1999". Includes bibliographical references (p. 95-96). Also available online.

Style APA, Harvard, Vancouver, ISO itp.

32

Pugh, Todd W. "Exit strategy in the implementation of Information Technology Systems". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1997. http://handle.dtic.mil/100.2/ADA341257.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Information Technology Management) Naval Postgraduate School, September 1997.
"September 1997." Thesis advisor(s): William J. Haga, Barry Frew. Includes bibliographical references (p. 55-57). Also available online.

Style APA, Harvard, Vancouver, ISO itp.

33

Bruchal, Terrence A. "An integrated model for the implementation of computer technology". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/NQ60277.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Vandenbussche, Jean-Jacques. "Analysis and implementation of MFIR filters in FPGA technology". Thesis, University of Kent, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.592014.

Pełny tekst źródła

Streszczenie:

This research investigates a digital filter architecture called Multiplicative Finite Impulse Response (MFIR) filters, for implementation on Field Programmable Gate Array (FPGA) technology, MFIR filters are a class of filter structures that can be used to replace recursive Infinite Impulse Response (IIR) filters with Finite Impulse Response (FIR) equivalents, requiring significantly less hardware than classical FIR architectures that fulfil the same specifications. A theoretical analysis of the performance, coefficient quantization effects and round off error behaviour is presented. Optimal FPGA-based implementations are suggested and analyzed. The performance of the MFIR structures is checked based on real-life applications. MFIR structures cannot compete with the IIR structures in terms of hardware requirements. Therefore, the MFIR approximation is mainly appropriate when potentially unstable IIR filters (with poles close to the unit circle) must be implemented in hardware or when linear phase filters with narrow transition bands are required . In general, it can be concluded that MFIR structures, when implemented on FPGA technology, are very good structures for the realization of demanding, possibly linear phase, stable digital filters.

Style APA, Harvard, Vancouver, ISO itp.

35

Heineck, Fabio L. (Fabio Luis). "Methodological analysis of process technology in Engineering projects implementation". Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/39514.

Pełny tekst źródła

Streszczenie:

Thesis (S.M.)--Massachusetts Institute of Technology, Sloan School of Management, 2007.
Includes bibliographical references (p. 94).
This thesis will evaluate the utilization of process management tools in the implementation of a major engineering project in a steel plant of Gerdau Group in the city of Charqueadas, Brazil. The project consisted of an increase in capacity of the electric arc furnace in order to improve the availability of liquid steel to the subsequent processes in the Melt Shop. The evaluation will be performed according to the Approach to Developing Process Technology Strategy (Beckman, S.L. and Rosenfield, D.B., Operations Leadership Competing in the New Economy, Irwin McGraw Hill, 2007) methodology and it will assess to what degree the company covered the six recommended steps of the methodology: Step 1 - Understand the Business Strategy and Competitive Environment Step 2 - Understand the Technology Trends in the Industry Step 3 - Understand the Internal Capabilities of the Company Step 4 - Identify and Assess Process Technology Investment Alternatives Step 5 - Develop an Implementation Plan and Implement Step 6 - Implement, Assess and Measure Results The evaluation will not prioritize the technical depth of the process technologies analyzed, but rather will focus on the strategic and tactical aspects of the projects' implementation process.
(cont.) The major goal will be to assist the company in improving its engineering projects managerial system. The actual methodology utilized in engineering projects, although covering most of managerial aspects of implementation, does not represent a formal approach to the process technology decisions required. The utilization of process management tools will provide less variability in the achievement of project performance goals, allowing the company to achieve the expected benefits related to its investments in installations and infrastructure quickly and consistently. The conclusions will be used to develop recommendations for the implementation of future projects and the evaluation will also address the organizational aspects for a possible replication of the project in other steel plants outside Brazil.
by Fabio L. Heineck.
S.M.

Style APA, Harvard, Vancouver, ISO itp.

36

Liu, Yuan-Ping. "Design and implementation of piezoelectric technology based power devices". Cachan, Ecole normale supérieure, 2009. http://tel.archives-ouvertes.fr/tel-00505837/fr/.

Pełny tekst źródła

Streszczenie:

Le travail présenté dans ce mémoire s'inscrit dans le cadre de l'utilisation de matériaux piézoélectriques pour la réalisation de composants passifs dans des applications de conversion d'énergie électrique. Le travail débute avec l'étude et le dimensionnement de deux convertisseurs d 'une puissance de 10 watt intégrant un transformateur piézoélectrique, l'un pour des applications d'alimentation stabilisée de 15 V (convertisseur DC/DC) et l'autre servant a l'alimentation de lampes fluorescentes a cathode froide utilisées pour le retro-éclairage d'écrans TFT de 32 pouces. L'idée étant que le transformateur piézoélectrique présente, dans ces applications, un certain nombre d'avantages compare au transformateur électromagnétique, comme une plus grande compacité et une meilleure compatibilité électromagnétique. L'originalité du travail repose sur la méthode de dimensionnement du transformateur qui n'est plus base sur Le principe de charge optimale mais qui introduit la notion de courant mécanique ou de vitesse maximale de vibration. Cette technique permet également de prédire l'élévation de température ainsi que les pertes du transformateur. On s'intéresse ensuite a l'optimisation et a la gestion de l'énergie au sein du transformateur piézoélectrique. La commutation introduisant des non-linéarités dans son fonctionnement, Le concept de cycle de travail a été introduit permettant une étude et des comparaisons des différentes architectures de conversion. Cela a permis la mise au point d'un nouveau redresseur contr6le par la vitesse de vibration. Ce redresseur actif a été transpose avec succès dans des appliIn this dissertation, piezoelectric materials were adopted in various power devices, and were further developed more specifically to power converters. The main purpose of this dissertation is to use piezoelectric transformer to replace the conventional electromagnetic transformer in power converters. A piezoelectric transformer based converter may reduce the electromagnetic interferences (EMI), the thickness ofthe converters and may increase the power density of the converter. Cold cathode fluorescent lamp (CCFL) based inverters, DC/DC converters and optimization of the piezoelectric layer fed rectifiers are the three main parts in this dissertation. Previous researches used the concept of the optimal loading condition as the major design parameter. However, practical power converters require regulating output current or voltage. Considering the power converters with current or voltage regulation, the concept of the optimal loading condition is no longer suitable to be the major design parameter. In this dissertation, the vibration velocity was adopted as the major design parameter, which makes the design procedure of piezoelectric transformers easier and clearer compared to the usual design rule. The proposed design procedure can predict the temperature rise as well as the losses of the piezoelectric transformers clearly. Both cold cathode fluorescent lamp based inverters and DC/DC converters can be designed to fit the requirements and the specifications well by the proposed design procedure. A 32 inches LCDTV inverter and a lOWatt step-down DC/DC converter were developed successfully, based on the design procedure detailed in this thesis. In addition, although the piezoelectric transformer itself does not radiate EMI , it still remains the conducted EMI problem. Due to the effect of parasitic capacitors and to the specific effect of the rectifier connected to the piezoelectric transformers, the EMI behaviour of the piezoelectric transformer based converter is quite different from typical converters. The model and analysis of the conducted EMI were studied and detailed in this dissertation. On the other hand, a piezoelectric layer fed rectifier is a non-linear device, which is not easy to analyze in general. The concept of work cycle analysis was proposed to simplify the analysis and the design procedure. Based on these work cycle analysis, a new concept of velocity controlled piezoelectric layer fed rectifier was proposed to optimize the energy flow out of the piezoelectric layer. This technique, also presented herein, was applied successfully to the structural damping.

Style APA, Harvard, Vancouver, ISO itp.

37

Foley, Virginia P. "Technology Implementation: Teacher Age, Experience, Self-Efficacy, and Professional". Digital Commons @ East Tennessee State University, 2013. https://dc.etsu.edu/etsu-works/5990.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Månsson, Max, i Erik Lidbeck. "Implementation of Sensor and Communication Technology for PAL Products". Thesis, Högskolan i Halmstad, Akademin för informationsteknologi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-43003.

Pełny tekst źródła

Streszczenie:

DD Company AB wanted to improve their existing products the football training rebounding board PAL and their PAL Cones. Their suggested solution was to create an application which communicates with PAL and PAL Cones via Bluetooth. The goal was to have an app which can record how many times PAL has been hit during a set time span and control PAL Cones to indicate to the player to step on a specific cone. PAL's problem was solved by on it place a base unit made of an accelerometer to sense impacts, a BLE112 Bluetooth module to communicate over Bluetooth and an Arduino UNO for reading the accelerometer and signal the Bluetooth module which transmits a hit counter over Bluetooth to the mobile application. The PAL Cone uses only the BLE112, a LED, a button and a button cell battery to keep the size to a minimum. The base unit is able to filter the initial impact from the residual vibrations and sends a updating hit counter over a Bluetooth connection to the mobile application. The mobile application can control the counter by sending commands to the base unit. After a hit the mobile application can activate a cone to light up and receives feedback when a player steps on the specified cone.

Style APA, Harvard, Vancouver, ISO itp.

39

Mok, Chuan-Hao. "National authentication framework implementation study". Thesis, Monterey, California : Naval Postgraduate School, 2009. http://edocs.nps.edu/npspubs/scholarly/theses/2009/Dec/09Dec%5FMok.pdf.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Computer Science)--Naval Postgraduate School, December 2009.
Thesis Advisor(s): Lundy, Bert ; Fulp, J. D. "December 2009." Description based on title screen as viewed on January 27, 2010. Author(s) subject terms: authentication, identity, OpenID, Infocard, SAML, WS-Federation, PKI, National Authentication Framework. Includes bibliographical references (p. 59-62). Also available in print.

Style APA, Harvard, Vancouver, ISO itp.

40

Jung, Hans-Helmuth. "Technology management control systems in technology-based enterprises design and implementation of systems to control technology strategy and performance /". Zürich : [s.n.], 2002. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=14857.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Russell, Gregg. "Strategic Leadership in Technology Implementation| A Case Study on the Principal's Role in Classroom Technology". Thesis, Northwest Nazarene University, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10813492.

Pełny tekst źródła

Streszczenie:

There is a high demand to incorporate technology into schools. Technology has infiltrated our society, and principals must learn to leverage technology to enhance learning while preparing students for a digital world. This case study examined principal leadership during a technology implementation in four public schools. The research was designed to investigate which specific actions principals take to promote technology in a school setting. McRel’s change management process was used as a theoretical framework in which to view the leadership of the participants. Methodology for the study included qualitative interviews and observations. A quantitative survey was used to run a Principal Component Analysis. Findings indicate that principals who strategically create a vision, provide resources, develop strong lines of communication, and systematically manage the change process, develop supportive cultures that promote innovation, and student-centered learning. Factors that support technology included managing change and communicating with stakeholders. This study identified five leadership responsibilities which, when used in conjunction with McRel’s second-order change process, enhanced a principal’s effectiveness. Findings would indicate that strategic leadership, paired with a change management framework, can increase a principal’s efficacy in implementing technology to promote a student-centered learning environment.

Style APA, Harvard, Vancouver, ISO itp.

42

Ashleigh, Douglas Anthony, i res cand@acu edu au. "A Study of Successful Implementation and Management of Educational Technology in Three New South Wales Primary Schools". Australian Catholic University. School of Educational Leadership, 2005. http://dlibrary.acu.edu.au/digitaltheses/public/adt-acuvp71.25092005.

Pełny tekst źródła

Streszczenie:

The main purpose of this dissertation is to analyse why three New South Wales primary schools were successful in implementing and managing educational technology. Responding to this research focus four specific questions were considered: Why have these schools been successful in implementing and managing educational technology? What factors have helped and/or hindered the successful implementation and management of educational technology within the selected schools? What are the indicators of successful implementation of educational technology? What were the particular contributions of leadership to the successful implementation and management of educational technology within the selected schools? This qualitative research study is based on the assumption that valuable data are gathered by studying schools that have been successful with the implementation and management of technology. In particular, the study provided a description and analysis of the best practice in three New South Wales Primary schools that had successfully implemented and managed educational technology. An interactive and cyclical process of data analysis was employed with data collection, data analysis and theory development proceeding simultaneously. To reduce and display data gathered from in-depth interviews, document study and non- participant observation the qualitative data analysis program QSR NUD*IST was utilised. The development and validation of the study’s conceptual framework shaped the study leading to the formulation of the SupportIF Model of Implementation. This model posits that success with implementation and management of educational technology is closely related to the level of interdependence between the implementation factors. The study results also endorsed the prime importance of a supportive work environment in each of the studied schools and linked this environment to the level of success realised with the implementation and management of technology and the utilisation of educational technology to enhance the achievement of student learning outcomes. The study contends that the sustainability of a school based technology initiative rests with a school’s ability to dynamically balance the key implementation factors and to redesign in light of shared practice. Tantamount to this process is a supportive work environment in each school which is the critical variable that facilitates interdependence between leadership, resources, relationships and teaching and learning factors.

Style APA, Harvard, Vancouver, ISO itp.

43

Engberg, Mattias. "An implementation of a rational, reactive agent". Thesis, Linköping University, Department of Science and Technology, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-2559.

Pełny tekst źródła

Streszczenie:

We are working on the development and design of an approach to agents that can reason, react to the environment and are able to update their own knowledge as a result of new incoming information. In the resulting framework, rational, reactive agents can dynamically change their own knowledge bases as well as their own goals. An agent can make observations, learn new facts and new rules from the environment, and then update its knowledge accordingly. The knowledge base of an agent and its updating mechanism has been implemented in Logic Programming. The agent’s framework is implemented in Java.

This aim of this thesis is to design and implement an architecture of a reactive, rational agent in both Java and Prolog and to test the interaction between the rational part and the reactive part of the agent. The agent architecture is called RR-agent and consists of six more or less components, four implemented in Java and the other two are implemented in XSB Prolog.

The result of this thesis is the ground for the paper “An architecture of a rational, reactive agent” by P. DellAcqua, M. Engberg, L.M. Pereira that has been submitted.

Style APA, Harvard, Vancouver, ISO itp.

44

Sharjeel, Khilji Muhammad. "Design and Implementation of aHeterogeneous Multicore Architectureusing Field Programmable Technology". Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-121697.

Pełny tekst źródła

Streszczenie:

Latest trend in multi core architectures is to integrate heterogeneouscores on a single chip in order to achieve task and threadlevel parallelism, high performance and energy efficiency. Someexamples of heterogeneous multi cores processors include (Tegraby NVIDIA,Cell by IBM and Fusion by AMD). The goal of this thesis work is to design a heterogeneous (2x2)network on chip which can run different tasks in parallel on allthe four cores in the network. Development steps of heterogeneousnetwork on chip include integration of Leon3 -a soft core processorby AeroFlex Gaisler which conforms with IEEE 1754 (SPARCV8) architecture- at one of the nodes of a homogeneous networkon chip incorporating four NiosII/s cores -soft core processor byAltera.This integration involves replacing a NiosII/s processor fromone of the four nodes of the homogeneous network by Leon3 processor.To translate the signals between the resource to networkinterface of the node and the Leon3 processor an AMBA bus1 toAvalon bus2 signal translation wrapper was designed. All processorsin the network on chip communicate by message passing interface.To exploit the potential of heterogeneous network on chipthree applications including sparse LU factorization, nqueens andFibonacci numbers calculation were run on it. These applicationwere run on Leon3 SPARC which generated a number of tasks thatcan run in parallel on all cores of the network simultaneously. Thisparallel execution of nqueens and fibonacci numbers calculationhas resulted in speed up as compared to the serial execution ofthese applications on Leon3 SPARC only. Because of the limitedsize of the on chip memory available for the Leon3 processor, itwas not possible to run sparse LU factorization for bigger matrixsizes and this constraint has resulted in no speed up in case ofsparse LU factorization.

Style APA, Harvard, Vancouver, ISO itp.

45

Rich, Oliver E. Rich Valerie S. "Intranet technology : considerations for implementation within the Department of Defense /". Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1997. http://handle.dtic.mil/100.2/ADA331697.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Information Technology Management) Naval Postgraduate School, March 1997.
Thesis advisors, Frank J. Barrett, Nancy C. Roberts. Includes bibliographical references (p. 99-101). Also available online.

Style APA, Harvard, Vancouver, ISO itp.

46

McKinnerney, Erin. "Reality bytes : a formative technology implementation plan for public schools /". View online, 2004. http://ecommons.txstate.edu/arp/25/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Mak, Yuen-ki Vinci. "Implementation of information and communication technology in primary English reading". Click to view the E-thesis via HKUTO, 2004. http://sunzi.lib.hku.hk/hkuto/record/B39848826.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Alexiadis, Evangelos. "Implementation of a real time Hough transform using FPGA technology". Thesis, University of Kent, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.544083.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Rich, Oliver E., i Valerie S. Rich. "Intranet technology: considerations for implementation within the Department of Defense". Monterey, California. Naval Postgraduate School, 1997. http://hdl.handle.net/10945/8565.

Pełny tekst źródła

Streszczenie:

Approved for public release; distribution is unlimited
Intranets, internal networks based on the same technology and protocol as the World Wide Web, have emerged in the past two years as a very popular medium for communication and information exchange within organizations. Organizations are flocking to this new tool in order to maintain or improve their market share and enhance communications and productivity. The purpose of this thesis is to give the DoD some guidance in deciding if this new wave of technology is suitable for its computing and information environment. A qualitative approach is used in obtaining the data for this thesis. The primary assumption of this research is that the introduction of an intranet is similar to the introduction of any information system. Therefore, a sample of information technology professionals with at least five years experience in planning, developing, managing, and implementing information systems within DoD or large, bureaucratic, and hierarchical organizations is interviewed. The interviews reveal a process of implementation that is heavily dependent on variables such as culture, structure, and size of the organization. The process has four major phases: leadership buy-in, prototype introduction, attainment of critical mass, and intranet refinement. The authors conclude that intranet technology creates the Opportunity for the DoD to become more productive and more efficient. They note that the real test for DoD implementors is in the application of the technology

Style APA, Harvard, Vancouver, ISO itp.

50

Mak, Yuen-ki Vinci, i 麥婉琪. "Implementation of information and communication technology in primary English reading". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2004. http://hub.hku.hk/bib/B39848826.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Rozprawy doktorskie na temat „Technology implementation”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych