Artykuły w czasopismach: „Technology – czech republic – encyclopedias”

1

Klusacek, Karel. "Technology foresight in the Czech Republic". International Journal of Foresight and Innovation Policy 1, nr 1/2 (2004): 89. http://dx.doi.org/10.1504/ijfip.2004.004623.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Bezousek, P., i V. Schejbal. "Radar technology in the Czech Republic". IEEE Aerospace and Electronic Systems Magazine 19, nr 8 (sierpień 2004): 27–34. http://dx.doi.org/10.1109/maes.2004.1346896.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Afanasyeva, Olyesya, Evgeniy Ivanov i Andrey Makushev. "Hop growing in the Czech Republic: ways of organizing production and solving modern problems". Agrarian Bulletin of the 23, nr 10 (13.11.2023): 114–23. http://dx.doi.org/10.32417/1997-4868-2023-23-10-114-123.

Pełny tekst źródła

Streszczenie:

Abstract. The purpose. Modern challenges faced by hop growers in Russia and the Czech Republic are quite similar. Parallels in development are especially obvious with those subjects where the industry has been developing historically, for example, with the Chuvash Republic. Therefore, the purpose of the work was to study the organization of hop production in the Czech Republic, review and analyze the main challenges, as well as identify ways to solve them, implemented in the Czech Republic. Methods. The theoretical and methodological basis of the study was the works of Czech scientists, the country's legislation. The official Internet resources of state and public structures of the Czech Republic became the information base. Scientific novelty. The study of ways to organize production and solve modern problems of hop growing by scientists, social activists and producers of the Czech Republic will serve as a good information base for domestic representatives of the industry. Results. To solve the problems with the obsolescence of hopspalers in the Czech Republic, it is proposed to replace them with shorter ones, which will reduce the cost of their maintenance and simplify mechanical processes. So that these changes do not reduce the volume of harvesting in the country, new varieties of hops are being developed. There are 12 of them in total, but 11 new varieties are expected to be introduced into circulation. Now the most popular and world-famous Czech variety is Saaz, which accounts for about 88% of the total hop area in the country. The high capital intensity of the industry requires large expenditures for any innovation. According to the calculations of Czech scientists, the commissioning and maintenance of a 50-hectare hop-growing field will cost 3.7 million euros. Therefore, an important aspect of the development of the industry in the Czech Republic is the availability of investment support from the state. Another distinguishing feature of the Czech hop industry is the involvement of 113 farmers in a single cooperative “Hop Growing”, which accounts for 90 % of the market share. All industry innovations and innovative solutions in the country are introduced into production through the cooperative.

Style APA, Harvard, Vancouver, ISO itp.

4

Koudelková, Petra. "Business Education for Students at Faculties of Technology". Lifelong Learning 3, nr 3 (2013): 45–62. http://dx.doi.org/10.11118/lifele2013030345.

Pełny tekst źródła

Streszczenie:

Many small and midsize companies are being closed down in the Czech Republic nowadays and new ones are not being established. It is necessary to introduce students and graduates to entrepreneurship to encourage business on the Czech market and to increase the competitiveness of the Czech Republic. Unfortunately, young people, above all students and graduates, have no effort to establish new start ups. This article deals with entrepreneurship among students at faculties of technology. The research used both quantitative and qualitative method.

Style APA, Harvard, Vancouver, ISO itp.

5

Rozmarinová, Jana, i Barbora Říhová. "Health Technology Assessment of the Medical Devices: A Case Study from the Czech Republic". NISPAcee Journal of Public Administration and Policy 14, nr 2 (1.12.2021): 253–72. http://dx.doi.org/10.2478/nispa-2021-0022.

Pełny tekst źródła

Streszczenie:

Abstract Health technology assessment (HTA) has become the systematic evaluation of health technology’s properties and effects that inform decision-makers. The implementation and expansion of HTA can contribute to slowing down burgeoning healthcare costs. In the Czech Republic, elements of HTA are quite standardly used in pharmacoeconomics, but questions arise on the use of HTA of medical devices. The theoretical framework developed is followed by a case study of the Czech Republic to assess whether the use of HTA of medical devices in the Czech Republic is implemented. This study uses publicly available resources, mainly public health acts and public notices related to HTA. We examined the institutionalisation of HTA for medical devices (HTA applied only at a selected area of medical devices) in the Czech Republic and compared Czech’s HTA principles of medical devices to the HTA Core Model. It was found that the HTA process used for medical devices is very limited in the Czech Republic. Our data show that HTA was officially established, but in reality, the medical devices have not been assessed following HTA principles.

Style APA, Harvard, Vancouver, ISO itp.

6

Wanner, Jirí, Jakub S. Cech, Miroslav Kos i Michael Barchánek. "Municipal effluent standards in the Czech Republic". Water Science and Technology 33, nr 12 (1.06.1996): 1–10. http://dx.doi.org/10.2166/wst.1996.0289.

Pełny tekst źródła

Streszczenie:

The paper explains the need for proper wastewater treatment in the Czech Republic and the development of legislation for effluent standards. A step-wise development from environmental quality standards to emission effluent standards is described. The necessity of retaining the environmental quality standards in the new legislation under specific conditions of the Czech Republic is explained. The paper describes the proposal by the Czech Association of Wastewater Treatment Experts to change the absolute effluent standards to standards with a stochastic character. The numerical values of effluent standards in the Czech Republic depend on the wastewater treatment plant size. Thus the wastewater treatment processes characteristic of individual size categories are described.

Style APA, Harvard, Vancouver, ISO itp.

7

Jakl, Ladislav. "Patent information situation in the Czech Republic". World Patent Information 16, nr 1 (marzec 1994): 50–54. http://dx.doi.org/10.1016/0172-2190(94)90189-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Valášek, Pavel. "Personal information environment awareness in the Czech Republic". MATEC Web of Conferences 210 (2018): 04039. http://dx.doi.org/10.1051/matecconf/201821004039.

Pełny tekst źródła

Streszczenie:

This article discusses the condition of information and communication technology usage in relation to problematics of the personal information environment in the Czech Republic. As to start any broader study of this topic in the ara of the Czech Republic, it is necessary to assess a current perception of the personal information environment and its elements. As existing studies are aimed mainly at a technical point of view, the presented study is focused on user participation a perception of individual technology elements. By a mean of the survey, a data were collected and analyzed using cluster analysis. Established groups of users are presented. The results of this study may create the suitable basis for a further research of discussed phenomena in the Czech Republic as well as an element of comparison for similar studies in other countries.

Style APA, Harvard, Vancouver, ISO itp.

9

Erban, Pawel. "Energy problems in the Czech Republic". International Journal of Global Energy Issues 16, nr 1/2/3 (2001): 26. http://dx.doi.org/10.1504/ijgei.2001.000906.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Lapčík, Vladimír, i Marta Lapčíková. "Possibilities of energy recovery from municipal waste". GeoScience Engineering 58, nr 4 (1.12.2012): 49–58. http://dx.doi.org/10.2478/v10205-011-0023-1.

Pełny tekst źródła

Streszczenie:

Abstract The article summarizes possibilities of energy recovery from municipal waste. It describes the history of incineration and energy recovery from municipal waste in Czechoslovakia and then in the Czech Republic. The attention is paid to the three currently operated plants for energy recovery from municipal waste in the Czech Republic (ZEVO Malešice, SAKO Brno and TERMIZO Liberec). The following are the characteristics of the planned plants for energy recovery from municipal waste in the Czech Republic. All these plants operate essentially based on grate boilers with flue gas treatment at the highest technical level. The article also lists other technologies which can be used for energy recovery from municipal waste - these are gasification and pyrolysis units and plasma technology. The conclusion of this contribution is devoted to the current and future situation in the area of energy recovery from municipal waste in the Czech Republic with regard to the applicable legal standards

Style APA, Harvard, Vancouver, ISO itp.

11

Janeček, Miloslav, Vít Květoň, Eliška Kubátová, Dominika Kobzová, Michaela Vošmerová i Jana Chlupsová. "Values of rainfall erosivity factor for the Czech Republic". Journal of Hydrology and Hydromechanics 61, nr 2 (1.06.2013): 97–102. http://dx.doi.org/10.2478/johh-2013-0013.

Pełny tekst źródła

Streszczenie:

Abstract The processing of ombrographic data from 29 meteorological stations of the Czech Hydrometeorological Institute (CHMI), according to the terms of the Universal Soil Loss Equation for calculating long term loss of soil through water erosion, erosion hazard rains and their occurrence have been selected, with their relative amount and erosiveness - R-Factors determined for each month and years. By comparing the value of the time division of the R-Factor in the area of the Czech Republic and in selected areas of the USA it has been demonstrated that this division may be applied in the conditions of the Czech Republic. For the Czech Republic it is recommended to use the average value R = 40 based on the original evaluation.

Style APA, Harvard, Vancouver, ISO itp.

12

Petrova, K., i E. Pravdova. "Radon program of the Czech Republic". Radiation Protection Dosimetry 160, nr 1-3 (8.04.2014): 27–29. http://dx.doi.org/10.1093/rpd/ncu113.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Bruthansová, J., i P. Kraft. "Ordovician conulariid monospecific assemblages (Czech Republic, Morocco)". Estonian Journal of Earth Sciences 72, nr 1 (2023): 120. http://dx.doi.org/10.3176/earth.2023.10.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Paiger, Karel, i Vlastimil Havelka. "Overview of the Czech Republic research and technology development activities". Air & Space Europe 3, nr 3-4 (maj 2001): 291–93. http://dx.doi.org/10.1016/s1290-0958(01)90122-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Kotaška, Stanislav, i Jaromír Říha. "Dam Incidents and Failures – Cases in the Czech Republic". Slovak Journal of Civil Engineering 31, nr 1 (1.03.2023): 22–33. http://dx.doi.org/10.2478/sjce-2023-0003.

Pełny tekst źródła

Streszczenie:

Abstract Dam incidents and failures mainly occur during extreme floods. In the Czech Republic (CR), large-scale regional floods were recorded in different regions in 1985, 1987, 1997, 2002, 2006, 2010, and 2013, while local floods especially occurred in 1991, 1996, 1997, 1998, 2002, 2004, 2005, 2009, and 2010. During these events, numerous incidents and total breaches of small dams were recorded, and a few large dams were also critically endangered, although they were not completely breached. This paper presents a comprehensive summary of incidents and failures affecting small dams in the CR since 1985. The most significant incidents concerning large dams are listed as well. The statistics show that 62 small dams were completely breached and that 350 were seriously damaged over 35 years in the period 1985–2020. The annual frequency amounts to 1.85 collapsed and 10 small damaged dams per year. The most common causes of the complete breaching of dams were overtopping (85 %) and internal erosion (15 %).

Style APA, Harvard, Vancouver, ISO itp.

16

Chládková, Helena, Renata Skýpalová i Veronika Blašková. "Strengthening the university competitiveness in the Czech Republic". Tuning Journal for Higher Education 9, nr 1 (26.11.2021): 127–55. http://dx.doi.org/10.18543/tjhe-9(1)-2021pp127-155.

Pełny tekst źródła

Streszczenie:

The number of students at Czech universities had been growing continuously until 2010. In 2010, almost 400,000 students studied there. Since then, this number has declined every year. Pressure on present-day universities has been accruing due to the competitive environment. The only way to strengthen competitiveness is to improve constantly the quality and image. The objective of this paper is to verify what factors are important for students regarding their satisfaction and what factors could be key for supporting the competitiveness of the Czech universities. To assess student satisfaction, the authors conducted a questionnaire survey where students were asked to identify the strengths and weaknesses of the faculty. The survey was carried out within the Faculty of Business and Economics of Mendel University in Brno (FBE MENDELU) and a selected private university in Brno in 2019. Relative frequencies were used in data processing and statistical hypotheses were tested. In addition to the basic classification according to one feature, a combination classification was also processed, and the independence was tested for different combinations of questions. Of the total number (1,020) of identified strengths at FBE MENDELU, 57.7% of students stated, “quality teachers”, 32.4% “faculty image” and 31.8% “modern environment” as strengths. Regarding the identified weaknesses, the most frequently mentioned were “study difficulty (42.4%),” weaker image of the university with the public “(31.5%) and not enough practical training (23.2%). At the private college, 47.8% of respondents cited “quality teachers”, “interesting lectures and teaching methods” (40.8%) and “study materials for subjects” (29.4%) as the school’s strengths. Received: 16 April 2021Accepted: 23 October 2021

Style APA, Harvard, Vancouver, ISO itp.

17

Stehlík, Dušan, Petr Hyzl i Michal Varaus. "Waste Building Materials to Roads in Czech Republic". Applied Mechanics and Materials 832 (kwiecień 2016): 10–17. http://dx.doi.org/10.4028/www.scientific.net/amm.832.10.

Pełny tekst źródła

Streszczenie:

Using waste building materials in pavements is one of the goals of transportation sustainable development in the Czech Republic. As part of research projects of the Technology Agency of the Czech Republic, a project was devised, which focused on maximal utilization of waste building materials when constructing pavements. After the initial verification of properties of the recycled aggregate (especially concrete waste building material), the research focus shifted towards the utilization of these waste building materials in cement bound granular mixtures.

Style APA, Harvard, Vancouver, ISO itp.

18

Kučera, Zdeněk, i Tomáš Vondrák. "Key Enabling Technologies – is the Czech Republic catching up the leading countries in innovation and technology?" ERGO 13, nr 1 (1.01.2018): 3–14. http://dx.doi.org/10.2478/ergo-2018-0001.

Pełny tekst źródła

Streszczenie:

AbstractThe topic of this contribution is a comparison of the research & development related to the “key enabling technologies” (KETs) in the Czech Republic and the European Union as a whole with selected non-European economies. A further aim of this article is an appraisal of the effect of the European strategies and action programmes which have been implemented since the turn of the decade and which target the lagging of EU in innovations in critical technologies. We use the publication and the patent activities as a proxy to assess the intensity of the KETs oriented R&D. The Asian countries Japan, South Korea and the fast growing China have the highest fraction of KETs oriented publications and patents in their national output. The Chinese State Intellectual Property Office (SIPO) recorded in 2015 a half of the world patent applications related to KETs. Measured by their share of publications, the Asian countries exhibit a significantly more intensive R&D in the majority of KETs. Whereas the patent activity of the Asian countries grows the number of patent applications in the EU stagnates in the recent years and EU visibly lags behind the Asian competitors. The EU R&D policies and strategies aimed at the promotion of KET and the financial support does not seem exhibiting visible effects. In the Czech republic KETs became an organic component of the National Research and Innovation Strategy for the intelligent specialisation (National RIS3 strategy) and a number of targeted public financing programmes support KETs related projects. The situation in the Czech Republic has been evolving in a positive way between 2008 and 2016. Both the number of publications and patent applications related to KETs has been increasing and the growth dynamics approaches the Asian countries. The number of publications per research worker in the Czech Republic is on par with the EU. Due to a stronger growth in recent years of the number of patent applications in comparison to EU the Czech republic reached the EU average per researcher and the fraction of the KETs related applications surpasses the EU average and even some developed countries.

Style APA, Harvard, Vancouver, ISO itp.

19

Hes, Aleš, Daniela Šálková i Marta Regnerová. "ICT in the retail in the Czech Republic". Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 58, nr 6 (2010): 143–50. http://dx.doi.org/10.11118/actaun201058060143.

Pełny tekst źródła

Streszczenie:

Besides agricultural primary production, the food industry and all other branches of the economy /services/ it is the information and communication technology used in retail that is one of the factors that markedly influence food retail. Therefore it is necessary to analyse the effect of electronic transactions that are used by food retail to attract and acquire other target groups of the consumers purchasing food. Though globally the retail companies (for ex. in Great Britain) invest in this technology heavily in order to increase their competitiveness on the market the food e-business in the Czech Republic has been more or less stagnating, though the recent years have been showing slight increase of interest in this form of shopping. This article identifies both the positive and the negative reasons of this situation. The technological level of computer network and its high accessibility proven by the fact that the vast majority of consumers can use internet for purchasing any kind of goods incl. food can be considered the positive reason. On the other hand the poor offer of food presented on the internet by retailers who – for fear of low demand for other kinds of food – focus mainly on beverages and dry food can be considered one of the negatives. The weakest point here is the timely delivery of goods in unchanged quality. Despite these facts the purchasing of food via internet can still serve well for busy or handicapped customers with limited mobility.

Style APA, Harvard, Vancouver, ISO itp.

20

Němeček, Jana. "Customer relationship management influence on sales of selected companies". Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 60, nr 2 (2012): 231–36. http://dx.doi.org/10.11118/actaun201260020231.

Pełny tekst źródła

Streszczenie:

General awareness of information technology and business strategy Customer Relationship Management (CRM) among managers in the Czech Republic is for several years, but in comparison with Western states of the European Union the Czech companies are underdeveloped. Apparently also because of the economic crisis is CRM in the Czech Republic begins to be used more. The main goal of implementing CRM is to help to company increase the quality of relationship and communication with customers. In this article are the most common definitions of CRM.The main content of this article is about the analysing and comparing of Trading Income of selected companies doing business in the Czech Republic. There are compared selected companies with implemented information technology and business strategy CRM with companies without implemented CRM and how it could have an impact to the Trading Income of these selected companies. Has CRM implementation helped to increase the positive Trading Income during the economic crisis? Included is an analysis of Trading Income from 2007 to 2010 for selected companies grouped by number of employees. The conclusion summarizes the analysis of results and assumptions and benefits of CRM.

Style APA, Harvard, Vancouver, ISO itp.

21

Pešek, J., i M. Dopita. "Coal production and usage in the Czech Republic". Geological Society, London, Special Publications 125, nr 1 (1997): 3–12. http://dx.doi.org/10.1144/gsl.sp.1997.125.01.03.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Blackman, Michael. "EPIDOS Annual Conference, Prague, Czech Republic, October 2004". World Patent Information 27, nr 2 (czerwiec 2005): 179–80. http://dx.doi.org/10.1016/j.wpi.2004.11.002.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Andrýsková, Jana. "eGovernment readiness assessment of the Czech Republic". Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 57, nr 6 (2009): 13–18. http://dx.doi.org/10.11118/actaun200957060013.

Pełny tekst źródła

Streszczenie:

Modern information technologies has entered all spheres of human activities, public administration authorities are not exceptions. There has been significantly increasing tendency in using information and communication technologies since beginning of the century in public administration. Despite of some indicators, progress of public administration information systems is too slow. Several organizations are engaged of eGovernment assessment at the international level. We can find some variations in the methodologies that cause different ranking of some countries in international comparison. The main goal of this paper is to analyze and assess the present state of Czech Republic eGovernment with using both external indicators and internal indicators. eGovernment index, developed by United Nations, will be the main external indicator of eGovernment quality of the Czech Republic. It includes both potential for eGovernment development and its implementation, and it‘s the most complete international ranking at present. It is defined as average of the telecommunication infrastructure index, the human capital index and the web measure index. It represents overall country ability to engage and implement eGovernment. Internal ranking of the Czech Republic eGovernment will be based upon eGovernment level coefficient, that is defined as multi-dimensional model based on technology and communication facility index, Internet using index, using of public administration services by persons and companies, poviding obligatory information, existence of electronic registry on web pages, web pages accessability and language mutations. Selected statistic data are related to information society and using information technologies in public administration and were published on Czech Statistical Office or evaluated on the bases of previous years‘ development.

Style APA, Harvard, Vancouver, ISO itp.

24

Nemec, Juraj, Beata Merickova i Frantisek Ochrana. "Introducing benchmarking in the Czech Republic and Slovakia". Public Management Review 10, nr 5 (wrzesień 2008): 673–84. http://dx.doi.org/10.1080/14719030802264424.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Saleh, Waad, Dalibor Kojecky, Edyta Agata Macieja i Juyoul Kim. "Advancing Small Modular Reactor Technology Assessment in the Czech Republic, Egypt, and Poland". Science and Technology of Nuclear Installations 2023 (21.10.2023): 1–16. http://dx.doi.org/10.1155/2023/7002980.

Pełny tekst źródła

Streszczenie:

This paper introduces the utilization of the International Atomic Energy Agency’s toolkit for reactor technology assessment (RTA) application to deploy small modular reactors (SMRs) in the Czech Republic, Egypt, and Poland. The increasing demand for clean energy has led to the prominence of small modular reactors (SMRs) in addressing global energy challenges. The successful integration of SMRs into national energy systems necessitates comprehensive evaluations that take into account each country’s specific characteristics and energy requirements. RTA application represents significant progress towards innovative nuclear solutions, advancing a cleaner and more resilient energy future plan. The aim of this study is assessing the feasibility and advantages of SMR implementation in these countries, focusing on energy security, emission reduction, and long-term sustainability. Various SMR technologies, including NuScale, SMART, HTR-PM, BWRX-300, SMR-160, and RITM-200, are comparatively analyzed based on safety, scalability, efficiency, and economic viability. The findings reveal that BWRX-300 suits the needs of the Czech Republic and Poland, while RITM-200 is the optimal choice for Egypt. Moreover, NuScale also stands as a strong alternative for all three countries. This article emphasizes the importance of informed discussions and evidence-based decisions, promoting sustainable energy development and global advancements in nuclear technology. By utilizing SMRs, the Czech Republic, Egypt, and Poland can enhance energy security, reduce emissions, and meet rising energy needs sustainably.

Style APA, Harvard, Vancouver, ISO itp.

26

Štefaniková, Sandra, i Filip Láb. "Transformation of photojournalism practice in the Czech Republic in the age of digital technology". Journalism 19, nr 2 (9.08.2016): 234–51. http://dx.doi.org/10.1177/1464884916663622.

Pełny tekst źródła

Streszczenie:

This study investigates the impact of digitalization on the photojournalistic profession and its transformation during the last two decades. The development of digital technology and the Internet by the end of the 20th century has brought several questions to the field of photojournalism and impacted the entire process of photojournalistic material production. Taking the example of the Czech Republic, we examine how photojournalists and photo editors perceive the changes brought on by the adoption of digital technology and how news routines, photojournalistic practices, image content, and professional identity have been reshaped. We conducted in-depth interviews and surveys with 48 photojournalists and photo editors from different Czech news media and magazines. The findings show how Czech photojournalists evaluate the state of their profession after digitalization. We also discuss a new way of image taking, so-called ‘cinematic shooting’, the ‘myth of acceleration’, and new responsibilities laid upon visual news professionals.

Style APA, Harvard, Vancouver, ISO itp.

27

Bruthansová, J., P. Kraft i J. Bruthans. "Subway into the Ordovician (Prague Basin, Czech Republic)". Estonian Journal of Earth Sciences 72, nr 1 (2023): 121. http://dx.doi.org/10.3176/earth.2023.09.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Marek, Luboš, Petr Doucek i Lea Nedomová. "Wages of Information Technology Professionals - A Czech and Slovak Republic Case". Quality Innovation Prosperity 25, nr 1 (1.04.2021): 73–87. http://dx.doi.org/10.12776/qip.v25i1.1468.

Pełny tekst źródła

Streszczenie:

Purpose: The objective of this article is to compare the trend in wages of ICT Professionals in the Czech and Slovak economies during the past two decades. Methodology/Approach: The input data set for ICT Professionals was relatively large - over 2.2 million (of which ICT represented over 60 thousand) in the Czech Republic and 1.1 million (of which ICT represented over 24 thousand) in the Slovak Republic. For the purposes of presented analyses, we used basic statistical methods and characteristics. Findings: We can make the following general conclusions based on our analyses: all analyzed wage characteristics increased over time, with the exception of the economic crisis during 2009-2014 when they stagnate. Research Limitation/Implication: Our data include outliers, especially wages above EUR 4,000. However, these wages, which are relatively rare, significantly influence the total volume of wages. Originality/Value of paper: Analysis of our data offers information about development of average real wages in ICT oriented jobs. There can be found analysis of wages in all sectors in literature. Analysis of ICT Professionals wages is rarely published in journals.

Style APA, Harvard, Vancouver, ISO itp.

29

Vostalová, Lenka, Jana Mazelová, Jiří Samek i Milan Vocelka. "HEALTH TECHNOLOGY ASSESSMENT IN EVALUATION OF PHARMACEUTICALS IN THE CZECH REPUBLIC". International Journal of Technology Assessment in Health Care 33, nr 3 (2017): 339–44. http://dx.doi.org/10.1017/s0266462317000204.

Pełny tekst źródła

Streszczenie:

Objectives: In the Czech Republic, the health technology assessment (HTA) approaches have been implemented in evaluation of medicinal products since 2008.The aim of this study was to provide an overview of the implementation of HTA and different levels thereof in the evaluation process conducted by the State Institute for Drug Control (SUKL) and to describe the impact of HTA on the entrance of new medicinal entities into out-patient healthcare system including highly innovative and orphan drugs.Methods: Materials supporting this overview were collected using the records in the database of administrative proceedings of SUKL, in-house standard operating procedures, and the legislation in force. Based on these sources as well as the hands-on knowledge of the current practice, a brief description of the general rules of administrative proceedings involving HTA of varying complexity was elaborated. Characteristic features of the individual types of proceedings, basic differences in the complexity of HTA employed, and its most important challenges were summarized.Results: In Czech Republic, HTA in the formal administrative proceedings ensures a transparent process of introduction of new medicinal products into clinical practice and leaves space for restriction of reimbursement conditions to minimize budget impact.Conclusions: As a robust as well as pragmatic HTA methodology has been implemented by SUKL, relevant stakeholders (marketing authorization holders, Health Care Funds, clinical expert groups) are now able to influence reimbursement of new technologies.

Style APA, Harvard, Vancouver, ISO itp.

30

Dvořák, Ivan, i Kateřina Čihařová. "Technology Transfer Training in the Czech Republic – Pilot of European Certification". Procedia - Social and Behavioral Sciences 103 (listopad 2013): 946–53. http://dx.doi.org/10.1016/j.sbspro.2013.10.417.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

Pruskova, Kristyna. "Beginning of Real Wide us of BIM Technology in Czech Republic". IOP Conference Series: Materials Science and Engineering 471 (23.02.2019): 102010. http://dx.doi.org/10.1088/1757-899x/471/10/102010.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Rosina, J., E. Kvasnak, D. Suta, T. Kostrhun i D. Drabova. "Czech Republic 20 years after Chernobyl accident". Radiation Protection Dosimetry 130, nr 4 (28.03.2008): 452–58. http://dx.doi.org/10.1093/rpd/ncn074.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Presová, R., i O. Tvrdoň. "Categorization of work equipment used in the meat industry". Agricultural Economics (Zemědělská ekonomika) 51, No. 9 (20.02.2012): 411–18. http://dx.doi.org/10.17221/5128-agricecon.

Pełny tekst źródła

Streszczenie:

This paper deals with the meat industry in the Czech Republic, the equipment which is used for meat cutting and processing for sale and for production of smoked goods. It determines individual categories of this equipment according to the use and describes materials used for manufacturing of clothing of butchers and also the complementary tools improving labour safety during technology operations. Next it presents materials used for making metal tools and describes the situation in the market of butcher´s equipment in the Czech Republic.

Style APA, Harvard, Vancouver, ISO itp.

34

Vymazal, J. "Constructed wetlands for wastewater treatment in the Czech Republic". Water Science and Technology 44, nr 11-12 (1.12.2001): 369–74. http://dx.doi.org/10.2166/wst.2001.0853.

Pełny tekst źródła

Streszczenie:

The first constructed wetland (CW) for wastewater treatment was built in the Czech Republic in 1989. This recent survey shows that at the end of 1999 101 systems are in operation and several more are under construction. 95 CWs are designed with sub-surface horizontal flow, 6 systems are hybrid with a combination of vertical and horizontal flow beds. Most systems (56) were designed for the treatment of municipal and domestic sewage while 38 CWs were designed for the treatment of wastewater from combined sewer systems. The most commonly used size of vegetated beds is 1,001-2,500 m2 (31 systems) followed by the area between 51-250 m2 (19%). The area of vegetated bed of the largest system is 4,493 m2. Size distribution is quite evenly spread from very small systems (PE = 3 or 4) up to 1,000 PE. However, most systems (44) were sized to treat wastewater from sources between 101 and 500 PE. The most commonly used macrophyte is Common reed (Phragmites australis) which is used in 34 systems as a monotypic stand and in 44 systems in combination with other macrophytes, most frequently with Reed canarygrass (Phalaris arundinacea) (31 systems) and cattails (Typha spp.) (8 systems).

Style APA, Harvard, Vancouver, ISO itp.

35

Šperková, Radka, i Jiří Duda. "Preliminary situation analysis of wine production industry in the Czech Republic since 1989". Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 57, nr 6 (2009): 287–96. http://dx.doi.org/10.11118/actaun200957060287.

Pełny tekst źródła

Streszczenie:

External environment factors influencing Czech wine production industry went have been significantly changing in the past 20 years. Objective of this paper is to identify and describe selected external environment factors influencing this industry.Changes in the Czech Republic in 1989 significantly influenced all industries in the Czech economy, including wine production. The most significant include the transition from planned socialistic economy to the market economy, establishment of the Czech Republic (January 1, 1993), entrance European Union (May 1, 2004). For the wine production industry it brought for example opening the domestic market to competition, simplifying international trade with EU-member countries, stabilization of the area of vineyards including the ban on their extension, establishment of the Wine Fund, establishment of non-governmental organisations supporting activities of wine producers (e.g. Union of wine producers of the Czech Republic, National Wine centre, Moravín, Partnership foundation), etc. Significant changes can be found also in the field of wine-marketing and promotion of wines. Wines from the Czech Republic are sold in foreign markets and achieve awards within international trade fairs and wine exhibitions, Czech Republic organises wine trade fairs, e.g. Vinex or Wine and distilled products, Wine fund have registered the trademark „Svatomartinské víno“ (St. Martin Wine), etc. Other significant factors identified within macro-environment analysis include continuous changes in wine production technology. Here we can expect that in the future, there will grow the use of PET bottles, which could replace the classical glass bottles, just as it happened in the soft-drinks production industry. Changes happened also in the field of legislature, and were connected with updating the law on winegrowing and wine production, change of the VAT to 19 %, cancellation of the consumption tax on wine or new titles of subsidies.Also the buyer behaviour goes through a gradual development and it is influenced by many factors. Therefore the paper includes statistical evaluation of dependence between the average monthly wages and wine consumption. Calculated values show a semi-strong positive linear dependence of these two factors.

Style APA, Harvard, Vancouver, ISO itp.

36

Bartonek, Dalibor, Jiri Bures i Otakar Svabensky. "Optimized GNSS RTK measurement planning for effective point occupation via heuristic analysis". Engineering Computations 34, nr 1 (6.03.2017): 90–104. http://dx.doi.org/10.1108/ec-11-2015-0352.

Pełny tekst źródła

Streszczenie:

Purpose This paper aims to deal with the formulation of the technological principle for precise positioning using global navigation satellite systems (GNSS) in railway engineering during construction and maintenance of a railway line and its spatial position. Solution of optimal route is based on finding the shortest Hamiltonian path in the graph method with additional conditions in nodes. Design/methodology/approach The core of the algorithm is a dynamic data structure which is based on events list. The optimization of field measurement solves the time demands and brings economic effectiveness. Findings The technology enables to determine the precise position with absolute difference limit from 10 to 15 mm within GNSS CZEPOS permanent network in the territory of Czech Republic. Research limitations/implications Technology is the result of applied research. Practical implications This technology innovates the current procedure of geodetic control network determination used by Railway Infrastructure Administration (state organization) in Czech Republic. Originality/value The event means measurement at a given track point and time for a specified duration of observation. The algorithm was realized in Borland Delphi. The optimization of field measurement solves its time demands and increases economic effectiveness. The technology enables precise position determination with absolute difference limit from 10 to 15 mm within GNSS CZEPOS permanent network in the territory of Czech Republic. It has been verified in field selected electrified and non-electrified railway lines.

Style APA, Harvard, Vancouver, ISO itp.

37

Hanusová, Irena, Jiří Svoboda i Petr Večerník. "Experimental pressure and sealing plug as part of the European DOPAS project – deep geological repository plug demonstration". Clay Minerals 51, nr 4 (wrzesień 2016): 589–601. http://dx.doi.org/10.1180/claymin.2016.051.4.04.

Pełny tekst źródła

Streszczenie:

AbstractThe objective of the DOPAS international project is to design a sealing-plug system for deep geological repository (DGR) use, to provide detailed plans for the design of such plugs, to test the characteristics of the materials to be used and the construction technology and to install four experimental in situ plugs. The Czech experimental pressure and sealing-plug (EPSP) experiment is being conducted in a rock environment consisting of granitoids at the Josef Regional Underground Research Centre. The concept of the experiment is based primarily on the use of materials and technology available in the Czech Republic and the principal aim is to demonstrate the technical viability and functioning of a pressure-resistant plug located in a future DGR. The completion of the EPSP experiment will contribute towards both the demonstration of how sealing-plug systems behave under real underground conditions and the long-term safety of a future DGR in the Czech Republic.

Style APA, Harvard, Vancouver, ISO itp.

38

Clark, Ed, i Anna Soulsby. "Transforming Former State Enterprises in the Czech Republic". Organization Studies 16, nr 2 (marzec 1995): 215–42. http://dx.doi.org/10.1177/017084069501600202.

Pełny tekst źródła

Streszczenie:

The study of organizational transformation has emerged from the foundations established by contingency theory and research. While institutional approaches to organizational analysis have preferred to focus on the tendency towards organizational continuity and inertia, recent developments have begun to con sider institutional pressures leading to change, and to provide clues about how contingency and institutional theories might complement each other in improv ing our understanding of organizational change. The evidence presented in this paper, drawn from a study of organizational transformation in the Czech Republic, allows exploration of the relationship between transforming state enterprises and the wider processes of social, economic and institutional change. The values, motives and actions of the key enterprise managers are shown to be essential factors in explaining both the process of transformation in state enterprises, and the role of institutional factors in that process.

Style APA, Harvard, Vancouver, ISO itp.

39

Suchánek, Petr, i Radovan Sobota. "Modelling Customer Satisfaction of Smartphones in the Czech Republic". Quality Innovation Prosperity 27, nr 1 (31.03.2023): 119–41. http://dx.doi.org/10.12776/qip.v27i1.1818.

Pełny tekst źródła

Streszczenie:

Purpose: The goal of this paper is to model customer satisfaction of smartphone select manufacturers in the Czech Republic (CR). Furthermore, the paper aims to model the factors which affect customer satisfaction of the smartphone. Methodology/Approach: A questionnaire was sent to 1,063 respondents in CR to collect data. Using structural equation modelling, relationships between factors of customer satisfaction within three models of customer satisfaction of select smartphone manufacturers were modelled. Findings: Effects of all investigated factors of customer satisfaction were verified, as well as all items which constituted the factors. Additionally, the functioning of the factor of total satisfaction with dimensions of general satisfaction and price tolerance was verified. Research Limitation/Implication: The research is limited by its focus exclusively CR, the number of manufacturers included in the research is rather low and small number of factors and items included in those factors. Originality/Value of paper: The models differed from each other in terms of the strength and direction of the relationships between the factors, which has implications for these recommendations. In general, each manufacturer has its own strengths and weaknesses (factors) that affect customer satisfaction with its product. Individual manufacturers can increase customer satisfaction by strengthening the positive factors or by learning from their competitors and eliminating or improving the factors that currently affect customer satisfaction negatively.

Style APA, Harvard, Vancouver, ISO itp.

40

Sivek, Martin, Marek Čáslavský i Jakub Jirásek. "Applicability of Hilt's law to the Czech part of the Upper Silesian Coal Basin (Czech Republic)". International Journal of Coal Geology 73, nr 2 (styczeń 2008): 185–95. http://dx.doi.org/10.1016/j.coal.2007.05.006.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Balvín, Pavel, Adam Vizina, Magdalena Nesládková, Johanna Blöcher, Marcela Makovcová, Vojtěch Moravec i Martin Hanel. "Minimum Residual Flows for Catchments in the Czech Republic". Water 13, nr 5 (3.03.2021): 689. http://dx.doi.org/10.3390/w13050689.

Pełny tekst źródła

Streszczenie:

The determination of minimum residual flow (MRF) follows diverse methodology in Europe due to differing hydrological conditions, ecosystem requirements, water abstraction requirements, and legislation. Methodologies in individual countries are difficult to compare qualitatively. However, individual approaches can serve as examples for countries undergoing the process of developing new methodologies, either for legislative purposes or to improve environmental standards on watercourses. This is exactly the situation in the Czech Republic which, has been working on the Regulation of the Government of the Czech Republic for ten years, since the amendment to the Water Act in 2010, defines the methods and criteria for determining the MRF on watercourses. T.G. Masaryk Water Research Institute, p.r.i., was commissioned to develop a new methodology to serve as the basis for the wording of aforementioned regulation. The new methodological approach took into account modern trends concerning the preservation of ecological standards, and used standard hydrological characteristics for its calculations. The newly proposed approach is undergoing a complicated approval process as the authors seek to increase the MRF compared to the current approach. The new approach assumes an MRF setting between Q97 and Q90. It defines four areas within the Czech Republic, by their hydrological and hydrogeological conditions, where the MRF is determined in different ways. This article describes the development of a new methodological approach, including the use the available Czech Hydrometeorological Institute data sets, the proposed regional division for MRF calculations, the determination the MRF below reservoirs, and the current state of the issue.

Style APA, Harvard, Vancouver, ISO itp.

42

Jezerský, Zdeněk. "Hydrogeochemistry of a deep gas-storage cavern, Czech Republic". Hydrogeology Journal 15, nr 3 (20.02.2007): 599–614. http://dx.doi.org/10.1007/s10040-007-0162-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Paličková, Agáta, i Filip Černoch. "Gaslighting Europe: Russia's energy disinformation in the Czech Republic". Energy Research & Social Science 112 (czerwiec 2024): 103497. http://dx.doi.org/10.1016/j.erss.2024.103497.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Žáková, Zdeñka. "Constructed wetlands in the Czech Republic — survey of the research and practical use". Water Science and Technology 33, nr 4-5 (1.02.1996): 303–8. http://dx.doi.org/10.2166/wst.1996.0519.

Pełny tekst źródła

Streszczenie:

In the Czech Republic numerous constructed wetlands were designed and built for point and non-point pollution abatement in recent years. The contribution brings a concise survey of the progress made in the research and practical application of these systems. Appx. 39 constructed wetlands were in operation or under construction in 1995. Their treatment effect and function have been monitored and evaluated. The greatest constraint is a lack of practical experience. To prevent unnecessary mistakes it is desirable to use the experience from countries with a longer tradition in construction and operation of such systems. Nevertheless, the research results, which have been obtained in the Czech Republic could be also useful for designers in other countries.

Style APA, Harvard, Vancouver, ISO itp.

45

Pazderka, Jiří, Michal Ženíšek, Tereza Pavlů, Pavel Reiterman i Ondřej Holpaček. "REMEDIATION TECHNOLOGY OF CLOCHE REPLACEMENT FOR WW2 FORTIFICATION IN THE CZECH REPUBLIC". Stavební obzor - Civil Engineering Journal 29, nr 1 (2020): 86–96. http://dx.doi.org/10.14311/cej.2020.01.0008.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Gulácsi, László, Alexandru M. Rotar, Maciej Niewada, Olga Löblová, Fanni Rencz, Guenka Petrova, Imre Boncz i Niek S. Klazinga. "Health technology assessment in Poland, the Czech Republic, Hungary, Romania and Bulgaria". European Journal of Health Economics 15, S1 (maj 2014): 13–25. http://dx.doi.org/10.1007/s10198-014-0590-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Durcansky, Peter, Branislav Zvada, Radovan Nosek, Jan Najser i Tomáš Najser. "Evolution of Green Energy Production in Czech Republic". Applied Sciences 13, nr 4 (8.02.2023): 2185. http://dx.doi.org/10.3390/app13042185.

Pełny tekst źródła

Streszczenie:

The use of renewable resources has been on the rise in recent years. The use of renewable resources is also related to state support, either in the form of a fixed price for the purchase of energy or in the form of direct investment aid. The present article analyzed the use of RES in the Czech Republic and the number of installations depending on state support, which represents a significant factor affecting the end user. The article presented the development of the legislative framework that formed the basis of RES support during the years since independence and the country’s entry into the EU. The breaking points of support, when support was increased, and the impact of this support on the number of new installations were indicated. The development of energy production from RES was analyzed on the basis of historical data. A numerical model using a neural network was developed to illustrate the impact of government measures. The time interval for training the network was chosen on the basis of legislative changes, while the possible course was monitored if the change did not occur, or if the support remained the same. The results of the numerical simulation point to the fact that without adequate legislation and state support, there would probably not be an expansion of the use of RES. On the other hand, if the initial high support were to remain, there would probably be a significant distortion of the energy market. Finally, a prediction for the near future was presented, while a stabilization of the situation was assumed.

Style APA, Harvard, Vancouver, ISO itp.

48

Dušánek, Petr. "Exploitation of Countrywide Airborne Lidar Dataset for Documentation of Historical Human Activities in Countryside". Geoinformatics FCE CTU 6 (21.12.2011): 97–102. http://dx.doi.org/10.14311/gi.6.13.

Pełny tekst źródła

Streszczenie:

During three years (2010 – 12) The Czech Office for Surveying, Mapping and Cadastre in cooperation with The Ministry of Defense of the Czech Republic and The Ministry of Agriculture of the Czech Republic are providing mapping of the entire area of the Czech Republic by Airborne laser scanning (ALS) technology. The goal of this project is to derive a highly accurate Digital Terrain Model (DTM) for purposes of administration like detection of flooded areas, orthorectification of areal images etc. Such data set also seems to be an interesting da ta source for mapping of human activities in countryside. Human settlements, agriculture or mining activities left significant scars on natural landscape. These significant man-made structures are a part of so called cultural landscape. Man-made structures include ancient settlements, remains of medieval mining activities or remains of settlements abandoned during 20th century. This article generally presents how to derive information about the man-made structures from raw LiDAR. Examples of significant findings of man-made imprints in countryside are also presented. Goal of this article is not to describe a certain archeological site but to inform about strengths of ALS data to map human activities in countryside, mainly in forested areas.

Style APA, Harvard, Vancouver, ISO itp.

49

Housarová, E., K. Pavelka i J. Šedina. "RPAS ACCURACY TESTING FOR USING IT IN THE CADASTRE OF REAL ESTATES OF THE CZECH REPUBLIC". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B1 (6.06.2016): 861–66. http://dx.doi.org/10.5194/isprs-archives-xli-b1-861-2016.

Pełny tekst źródła

Streszczenie:

In the last few years, interest in the collection of data using remotely piloted aircraft systems (RPAS) has sharply risen. RPAS technology has a very wide area of use; one of its main advantages is its accuracy, timeliness of data, frequency of collecting data and low operating costs. RPAS can be used for the mapping of small, dangerous and inaccessible areas in contrast with ordinary aerial photogrammetry. In the cadastre of real estates of the Czech Republic, it is possible to map out areas by using aerial photogrammetry, so it has been done in the past. However, this is a relatively expensive and complex technology, and therefore we are looking for new alternatives. An alternative would be to use RPAS technology for data acquisition. The testing of the possibility of using RPAS for the cadastre of real estates of the Czech Republic is the subject of this paper. When evaluating results we compared point coordinates measured by geodetic method, GNSS technology and RPAS technology.

Style APA, Harvard, Vancouver, ISO itp.

50

Housarová, E., K. Pavelka i J. Šedina. "RPAS ACCURACY TESTING FOR USING IT IN THE CADASTRE OF REAL ESTATES OF THE CZECH REPUBLIC". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B1 (6.06.2016): 861–66. http://dx.doi.org/10.5194/isprsarchives-xli-b1-861-2016.

Pełny tekst źródła

Streszczenie:

In the last few years, interest in the collection of data using remotely piloted aircraft systems (RPAS) has sharply risen. RPAS technology has a very wide area of use; one of its main advantages is its accuracy, timeliness of data, frequency of collecting data and low operating costs. RPAS can be used for the mapping of small, dangerous and inaccessible areas in contrast with ordinary aerial photogrammetry. In the cadastre of real estates of the Czech Republic, it is possible to map out areas by using aerial photogrammetry, so it has been done in the past. However, this is a relatively expensive and complex technology, and therefore we are looking for new alternatives. An alternative would be to use RPAS technology for data acquisition. The testing of the possibility of using RPAS for the cadastre of real estates of the Czech Republic is the subject of this paper. When evaluating results we compared point coordinates measured by geodetic method, GNSS technology and RPAS technology.

Style APA, Harvard, Vancouver, ISO itp.

Artykuły w czasopismach na temat „Technology – czech republic – encyclopedias”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych