Artykuły w czasopismach na temat „TAGUCHI L16 ARRAY”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „TAGUCHI L16 ARRAY”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.
Struzikiewicz, Grzegorz, Wojciech Zębala i Ksenia Rumian. "Application of Taguchi Method to Optimization of Cutting Force and Temperature during Turning of Difficult to Cut Materials". Key Engineering Materials 686 (luty 2016): 114–18. http://dx.doi.org/10.4028/www.scientific.net/kem.686.114.
Pełny tekst źródłaBashir M. Aburawi i Meor Othman Hamzah. "Investigating the Effect of Experimental Factors on the Performance of Warm Mix Asphalt with Wax Additive using Application of the Taguchi Method". Journal of Pure & Applied Sciences 22, nr 3 (2.10.2023): 54–59. http://dx.doi.org/10.51984/jopas.v22i3.2735.
Pełny tekst źródłaKhavekar, Rajendra, Hari Vasudevan i Gosar Vimal. "Optimization of Injection Moulding Process Parameters for Manufacturing Plastic Components (PBT) Using Taguchi Method (TM)". Materials Science Forum 969 (sierpień 2019): 775–80. http://dx.doi.org/10.4028/www.scientific.net/msf.969.775.
Pełny tekst źródłaEski, Ardahan, Zihni Demirbağ i İsmail Demir. "Improvement of delta-endotoxin production from local Bacillus thuringiensis Se13 using Taguchi’s orthogonal array methodology". Turkish Journal of Biochemistry 43, nr 6 (25.07.2018): 662–70. http://dx.doi.org/10.1515/tjb-2017-0364.
Pełny tekst źródłaKarolina, Rahmi, Johannes Tarigan, M. A. Megat Johari, M. J. A. Mijarsh i Harianto Hardjasaputra. "Synthesis of Volcanic Ash-based Geopolymer Mortar Designed by the Taguchi Method". Civil Engineering Journal 8, nr 11 (1.11.2022): 2585–97. http://dx.doi.org/10.28991/cej-2022-08-11-016.
Pełny tekst źródłaAhmed, Shaimaa Abdul-Rahman, i Hasan F. Makki. "Corrosion Rate Optimization of Mild-Steel under Different Cooling Tower Working Parameters Using Taguchi Design". Journal of Engineering 26, nr 1 (25.12.2019): 174–85. http://dx.doi.org/10.31026/j.eng.2020.01.13.
Pełny tekst źródłaTabaraki, Reza, i Mina Khodabakhshi. "Multidye Biosorption: Wavelet Neural Network Modeling and Taguchi L16 Orthogonal Array Design". CLEAN - Soil, Air, Water 45, nr 5 (18.04.2017): 1500499. http://dx.doi.org/10.1002/clen.201500499.
Pełny tekst źródłaGugulothu, Bhiksha, P. S. Satheesh Kumar, Bathula Srinivas, Alapati Ramakrishna i S. Vijayakumar. "Investigating the Material Removal Rate Parameters in ECM for Al 5086 Alloy-Reinforced Silicon Carbide/Flyash Hybrid Composites by Using Minitab-18". Advances in Materials Science and Engineering 2021 (3.11.2021): 1–6. http://dx.doi.org/10.1155/2021/2079811.
Pełny tekst źródłaSreeraj, P., T. Kannan i Maji Subhasis. "Analysis of flux cored arc welding process parameters by hybrid taguchi approach". World Journal of Engineering 11, nr 6 (1.12.2014): 575–88. http://dx.doi.org/10.1260/1708-5284.11.6.575.
Pełny tekst źródłaWang, Hong Jun, Dun Wen Zuo, Hong Miao, Hong Feng Wang i Min Wang. "Effect of Discharge Parameters on Micro-Surface Topography of NAK80 by Mirror-Like Surface EDM". Key Engineering Materials 431-432 (marzec 2010): 438–41. http://dx.doi.org/10.4028/www.scientific.net/kem.431-432.438.
Pełny tekst źródłaNorouzbeigi, Reza, i Mohammad Edrissi. "Modification and optimization of nano-crystalline Al2O3 combustion synthesis using Taguchi L16 array". Materials Research Bulletin 46, nr 10 (październik 2011): 1615–24. http://dx.doi.org/10.1016/j.materresbull.2011.06.014.
Pełny tekst źródłaVijayaraj, R., S. Gowri i A. S. S. Balan. "Study on Parametric Influence, Optimization and Modeling in Micro WEDM of Ti Alloy". Advanced Materials Research 76-78 (czerwiec 2009): 571–76. http://dx.doi.org/10.4028/www.scientific.net/amr.76-78.571.
Pełny tekst źródłaShi, Wentian, Yanjun Hou, Chao Kong i Yude Liu. "Optimization of cutting force and temperature during Ti6Al4V/Al7050 laminate composites elliptical vibration turning". Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, nr 16 (29.05.2019): 5585–96. http://dx.doi.org/10.1177/0954406219853315.
Pełny tekst źródłaRavikumar, A. R., K. S. Amirthagadeswaran i P. Senthil. "Parametric Optimization of Squeeze Cast AC2A-Ni CoatedSiCpComposite Using Taguchi Technique". Advances in Materials Science and Engineering 2014 (2014): 1–10. http://dx.doi.org/10.1155/2014/160519.
Pełny tekst źródłaTeng, Li Wei, Ran Huang, Si Yu Zou i Hui Mi Hsu. "Protection Effectiveness of Concrete Surface Treating Materials". Advanced Materials Research 834-836 (październik 2013): 749–54. http://dx.doi.org/10.4028/www.scientific.net/amr.834-836.749.
Pełny tekst źródłaKou, Yalin, Ying Gao, Yuelin You i Yurang Wang. "Numerical investigation for optimization of spark-ignition internal combustion engine knock by Taguchi-Grey method". Science Progress 105, nr 4 (październik 2022): 003685042211292. http://dx.doi.org/10.1177/00368504221129280.
Pełny tekst źródłaRizvi, Saadat Ali, i Wajahat Ali. "Multi attribute decision making parametric optimization in weld bead by gas metal arc welding through grey relation analysis: A case study". International Journal of Engineering, Science and Technology 12, nr 2 (1.06.2020): 59–66. http://dx.doi.org/10.4314/ijest.v12i2.7.
Pełny tekst źródłaSenthamilperarasu, S., P. Padmini, B. Shanmuganathan, N. R. R. Anbusagar i P. Sengottuvel. "Effects of Electrical Process Parameters and Electrode Tool Geometries in EDM of Inconel825 Material Using Zirconium Copper Electrode". Applied Mechanics and Materials 766-767 (czerwiec 2015): 668–73. http://dx.doi.org/10.4028/www.scientific.net/amm.766-767.668.
Pełny tekst źródłaZhang, Ning, Ai Zhong Lu, Pan Cui i Yun Qian Xu. "Investigating Properties of Haydite Concrete by Using Taguchi Method". Advanced Materials Research 261-263 (maj 2011): 242–46. http://dx.doi.org/10.4028/www.scientific.net/amr.261-263.242.
Pełny tekst źródłaTang, Chao Wei, Shun Yuan Wang, Chiu Kuei Cheng i Chung Ho Huang. "Producing Lightweight Aggregates by Incorporating Waste LCD Glass with Reservoir Sediments". Advanced Materials Research 610-613 (grudzień 2012): 2287–91. http://dx.doi.org/10.4028/www.scientific.net/amr.610-613.2287.
Pełny tekst źródłaHulipalled, Poornima, Veerabhadrappa Algur, V. Lokesha i S. Naveen. "Wear Behaviour Of Modified ZA-27 Alloy: A Statistical Analysis". Journal of Mines, Metals and Fuels 70, nr 3A (12.07.2022): 57. http://dx.doi.org/10.18311/jmmf/2022/30669.
Pełny tekst źródłaChen, Dyi-Cheng, i Yu-Kuan Yeh. "Using finite element analysis to discuss the study of drawing of servo stamping curve". Advances in Mechanical Engineering 13, nr 11 (listopad 2021): 168781402110610. http://dx.doi.org/10.1177/16878140211061015.
Pełny tekst źródłaAyaz, M., N. Banimostafa Arab i D. Mirahmadi Khaki. "Application of Taguchi Method for Investigating the Mechanical Properties of a Microalloyed Steel". Archives of Metallurgy and Materials 59, nr 3 (28.10.2014): 853–58. http://dx.doi.org/10.2478/amm-2014-0144.
Pełny tekst źródłaSolati, Ali, Nasrollah Bani Mostafa Arab, Akbar Mohammadi-Ahmar i Hamid Reza Fazli Shahri. "Multi-criteria optimization of weld bead in pulsed Nd:YAG laser welding of stainless steel 316". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 233, nr 2 (16.02.2018): 151–64. http://dx.doi.org/10.1177/0954408918756654.
Pełny tekst źródłaYeo, Chae-Eun, Minhye Seo, Dongju Kim, Cheonwoo Jeong, Hye-Sun Shin i Suhyun Kim. "Optimization of Operating Conditions for CO2 Methanation Process Using Design of Experiments". Energies 14, nr 24 (13.12.2021): 8414. http://dx.doi.org/10.3390/en14248414.
Pełny tekst źródłaWunna, Kyaw, Kiohiko Nakasaki, Joseph Auresenia, Leonila Abella i Peg-asa Gaspilo. "Enhancement of Delignification and Glucan Content of Sugarcane Bagasse by Alkali Pretreatment for Bioethanol Production". ASEAN Journal of Chemical Engineering 21, nr 2 (30.12.2021): 133. http://dx.doi.org/10.22146/ajche.59093.
Pełny tekst źródłaGope, Deepayan, i Sandeep Kumar Goel. "Design optimization of permanent magnet synchronous motor using Taguchi method and experimental validation". International Journal of Emerging Electric Power Systems 22, nr 1 (25.12.2020): 9–20. http://dx.doi.org/10.1515/ijeeps-2020-0169.
Pełny tekst źródłaYerrawar, R. N., i R. R. Arakerimath. "Parametric Analysis of Magnetorheological Strut for Semiactive Suspension System Using Taguchi Method". Engineering, Technology & Applied Science Research 8, nr 4 (18.08.2018): 3218–22. http://dx.doi.org/10.48084/etasr.2139.
Pełny tekst źródłaZolgharnein, Javad, Neda Asanjarani i Tahere Shariatmanesh. "Taguchi L16 orthogonal array optimization for Cd (II) removal using Carpinus betulus tree leaves: Adsorption characterization". International Biodeterioration & Biodegradation 85 (listopad 2013): 66–77. http://dx.doi.org/10.1016/j.ibiod.2013.06.010.
Pełny tekst źródłaWang, Hong Jun, Dun Wen Zuo, X. M. Wu i M. Wang. "Relationship between the Fine Discharge Parameters and Craters EDMed of the NAK80 Steel". Key Engineering Materials 426-427 (styczeń 2010): 85–88. http://dx.doi.org/10.4028/www.scientific.net/kem.426-427.85.
Pełny tekst źródłaRao, Ch Maheswara, B. B. Ashok Kumar i K. Venkata Subbaiah. "Application of MCDM/MADM Approach Entropy-TOPSIS in Turning of AA6061". International Journal of Advance Research and Innovation 9, nr 2 (2021): 126–32. http://dx.doi.org/10.51976/ijari.922120.
Pełny tekst źródłaGacem, Amel, Moamen S. Refat, H. Elhosiny Ali, S. C. V. Ramana Murty Naidu, B. Beenarani, Pranjali Deole, S. Sandeep Kumar, S. Rama, Amnah Mohammed Alsuhaibani i Abdi Diriba. "Optimization and Mechanical Characteristics of AA6061/Zirconia Nanocomposites Fabricated by Ultrasonic-Aided Stir Casting Method". Journal of Nanomaterials 2022 (20.09.2022): 1–15. http://dx.doi.org/10.1155/2022/2453412.
Pełny tekst źródłaLokeshwari, M., P. Vidya Sagar, K. Dilip Kumar, D. Thirupathy, Ram Subbiah, P. Ganeshan, A. H. Seikh, S. M. A. K. Mohammed i David Christopher. "Optimization and Tribological Properties of Hybridized Palm Kernel Shell Ash and Nano Boron Nitride Reinforced Aluminium Matrix Composites". Journal of Nanomaterials 2022 (22.06.2022): 1–9. http://dx.doi.org/10.1155/2022/8479012.
Pełny tekst źródłaNatrayan, L., Raviteja Surakasi, Pravin P. Patil, S. Kaliappan, V. Selvam i P. Murugan. "Optimizing Numerous Influencing Parameters of Nano-SiO2/Banana Fiber-Reinforced Hybrid Composites using Taguchi and ANN Approach". Journal of Nanomaterials 2023 (27.04.2023): 1–14. http://dx.doi.org/10.1155/2023/3317584.
Pełny tekst źródłaLee, Pin-Chan, Tzu-Ping Lo, Haoqing Sun i I.-Jyh Wen. "An efficient method for determining the optimal convolutional neural network structure based on Taguchi method". Journal of Intelligent & Fuzzy Systems 39, nr 3 (7.10.2020): 2611–25. http://dx.doi.org/10.3233/jifs-190275.
Pełny tekst źródłaözdemir, Mustafa. "Optimization of Spring Back in Air V Bending Processing using Taguchi and RSM Method". Mechanics 26, nr 1 (12.02.2020): 73–81. http://dx.doi.org/10.5755/j01.mech.26.1.22831.
Pełny tekst źródłaAdil, A., i A. Moutawakil. "The Quality Cost Reduction in Hollow Glass Manufacturing by Taguchi Method". Journal of Scientific Research 4, nr 1 (26.12.2011): 155. http://dx.doi.org/10.3329/jsr.v4i1.7900.
Pełny tekst źródłaAmin, Azriszul Mohd, Mohd Halim Irwan Ibrahim, Rosli Asmawi, Najwa Mustapha i Mohd Yussni Hashim. "Green Density Optimisation with Sustainable Sewage Fat as Binder Components in SS316L Feedstock of Metal Injection Moulding Process (MIM) by Taguchi Method". Applied Mechanics and Materials 773-774 (lipiec 2015): 173–77. http://dx.doi.org/10.4028/www.scientific.net/amm.773-774.173.
Pełny tekst źródłaMaňková, Ildikó, Marek Vrabel', Daniel Kottfer, Mária Franková i Miroslav Paľo. "Evaluation of Relationship between Cutting Parameters and Torque in Hole Making of Titanium Alloy". Solid State Phenomena 261 (sierpień 2017): 17–21. http://dx.doi.org/10.4028/www.scientific.net/ssp.261.17.
Pełny tekst źródłaHong, Tran Thi, Nguyen Van Cuong, Le Hong Ky, Quoc Tuan Nguyen, Banh Tien Long, Luu Anh Tung, Thanh Tu Nguyen i Vu Ngoc Pi. "Multi-Criteria Optimization of Dressing Parameters for Surface Grinding 90CrSi Tool Steel Using Taguchi Method and Grey Relational Analysis". Materials Science Forum 998 (czerwiec 2020): 61–68. http://dx.doi.org/10.4028/www.scientific.net/msf.998.61.
Pełny tekst źródłaSalahi, A., i T. Mohammadi. "Oily wastewater treatment by ultrafiltration using Taguchi experimental design". Water Science and Technology 63, nr 7 (1.04.2011): 1476–84. http://dx.doi.org/10.2166/wst.2011.383.
Pełny tekst źródłaRamavandi, Bahman, Ghorban Asgari, Javad Faradmal, Soleyman Sahebi i Babak Roshani. "Abatement of Cr (VI) from wastewater using a new adsorbent, cantaloupe peel: Taguchi L16 orthogonal array optimization". Korean Journal of Chemical Engineering 31, nr 12 (4.09.2014): 2207–14. http://dx.doi.org/10.1007/s11814-014-0172-6.
Pełny tekst źródłaGajević, Sandra, Slavica Miladinović, Onur Güler, Hamdullah Çuvalcı, Nenad Miloradović i Blaža https://orcid.org/0000-0003-4790-2856. "Multi response parameters optimization of ZA-27 nanocomposites". Advanced Technologies & Materials 46, nr 1 (30.06.2021): 11–18. http://dx.doi.org/10.24867/atm-2021-1-003.
Pełny tekst źródłaKarmiris, P., E. L. Papazoglou, B. Leszczyńska, K. Zagórski i A. P. Markopoulos. "On machining of Calmax steel by EDM: an experimental study". IOP Conference Series: Materials Science and Engineering 1193, nr 1 (1.10.2021): 012020. http://dx.doi.org/10.1088/1757-899x/1193/1/012020.
Pełny tekst źródłaIrawati, Nelvi, Nilda Tri Putri i Alexie Herryandie Bronto Adi. "Strategi Perencanaan Jumlah Material Tambahan dalam Memproduksi Semen dengan Pendekatan Taguchi untuk Meminimalkan Biaya Produksi (Study Kasus PT Semen Padang)". Jurnal Optimasi Sistem Industri 14, nr 1 (21.04.2016): 176. http://dx.doi.org/10.25077/josi.v14.n1.p176-191.2015.
Pełny tekst źródłaKohli, Deepak, Sangeeta Garg, A. K. Jana i Mithu Maiti. "Synthesis of Graft Copolymers for Green Composite Films and Optimization of Reaction Parameters using Taguchi (L16) Orthogonal Array". Indian Chemical Engineer 59, nr 2 (8.02.2016): 136–58. http://dx.doi.org/10.1080/00194506.2016.1139473.
Pełny tekst źródłaMashhadani, Zuhair I. Al, i Muneam Hussein Ali. "Investigating the Effect of Tic Coating Layer on the Surface Roughness of Tungsten Carbide Cutting Tools Using Taguchi Design". NeuroQuantology 19, nr 12 (29.12.2021): 30–36. http://dx.doi.org/10.14704/nq.2021.19.12.nq21193.
Pełny tekst źródłaGeetha, Narayanan Kannaiyan, Pappuula Bridjesh i Perumal Sekar. "Influence of Ethanol as Gasoline Blend on Spark Ignition Engine". Oriental Journal Of Chemistry 35, nr 5 (5.10.2019): 1491–99. http://dx.doi.org/10.13005/ojc/350503.
Pełny tekst źródłaDirisenapu, Gopichand, Laxmanaraju salavaravu, Murahari kolli, Rajyalakshmi Bandi, Ashish kumar sahu i Kosaraju Satyanarayana. "Optimization of process variables on Electrical Discharge Machining of novel Al7010/B4C/BN hybrid metal matrix nanocomposite". E3S Web of Conferences 391 (2023): 01170. http://dx.doi.org/10.1051/e3sconf/202339101170.
Pełny tekst źródłaYILDIZ, Can, Faruk ÇAVDAR i Erdoğan KANCA. "Toz Oranı ve EDM Parametrelerinin Toz Katkılı EDM ile İşlenen CrCoMo’nin Yüzey Kalitesine Etkileri Üzerine Bir Cevap Yüzeyi Çalışması". Karadeniz Fen Bilimleri Dergisi 13, nr 2 (15.06.2023): 415–33. http://dx.doi.org/10.31466/kfbd.1216109.
Pełny tekst źródła