Gotowa bibliografia na temat „Swelling stresses”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Swelling stresses”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Swelling stresses"
Bathija, Arpita Pal, Haiyi Liang, Ning Lu, Manika Prasad i Michael Lee Batzle. "Stressed swelling clay". GEOPHYSICS 74, nr 4 (lipiec 2009): A47—A52. http://dx.doi.org/10.1190/1.3131385.
Pełny tekst źródłaNah, C., G. B. Lee, C. I. Lim, J. H. Ahn i A. N. Gent. "Swelling of Rubber under Nonuniform Stresses and Internal Migration of Swelling Liquid When the Stresses Are Removed". Macromolecules 44, nr 6 (22.03.2011): 1610–14. http://dx.doi.org/10.1021/ma102528t.
Pełny tekst źródłaPapanastasiou, Tasos C., Dionissios G. Kiriakidis i Theodore G. Nikoleris. "Extrudate Swelling: Physics, Models, and Computations". Applied Mechanics Reviews 48, nr 10 (1.10.1995): 689–95. http://dx.doi.org/10.1115/1.3005050.
Pełny tekst źródłaKhrapatova, I. V., i O. V. Krotov. "THE ANALYSIS OF THE STRESS-STRAIN STATE OF THE SYSTEM «BASEMENT - PILE FOUNDATION – STRUCTURE» CONSIDERING SWELLING PROPERTIES OF SOILS". ACADEMIC JOURNAL Series: Industrial Machine Building, Civil Engineering 2, nr 49 (17.10.2017): 54–60. http://dx.doi.org/10.26906/znp.2017.49.824.
Pełny tekst źródłaMakhnenko, O. V., I. V. Mirzov i V. B. Porokhonko. "Modelling of residual stresses, radiation swelling and stressed state of in-service WWER-1000 reactor baffle". Paton Welding Journal 2016, nr 4 (28.04.2016): 32–38. http://dx.doi.org/10.15407/tpwj2016.04.03.
Pełny tekst źródłaHall, M. M. "Irradiation creep relaxation of void swelling-driven stresses". Journal of Nuclear Materials 432, nr 1-3 (styczeń 2013): 166–74. http://dx.doi.org/10.1016/j.jnucmat.2012.08.015.
Pełny tekst źródłaKowalski, Stefan J., i Andrzej Rybicki. "Drying Induced Stresses in a Swelling Porous Wall". Transport in Porous Media 57, nr 1 (październik 2004): 35–48. http://dx.doi.org/10.1023/b:tipm.0000032743.55654.ed.
Pełny tekst źródłaKowal, M., i S. J. Kowalski. "Experimental Investigation of Water Soaked Wood at Uniaxial and Biaxial States of Stress". Applied Mechanics Reviews 48, nr 10 (1.10.1995): 684–88. http://dx.doi.org/10.1115/1.3005049.
Pełny tekst źródłaBreslavsky, Dmytro. "Influence of stresses on deformation process under the irradiation creep and swelling". Bulletin of the National Technical University «KhPI» Series: Dynamics and Strength of Machines, nr 2 (31.12.2021): 23–28. http://dx.doi.org/10.20998/2078-9130.2021.2.245529.
Pełny tekst źródłaVirta, Jari, Simo Koponen i Ilmari Absetz. "Measurement of swelling stresses in spruce (Picea abies) samples". Building and Environment 41, nr 8 (sierpień 2006): 1014–18. http://dx.doi.org/10.1016/j.buildenv.2005.10.012.
Pełny tekst źródłaRozprawy doktorskie na temat "Swelling stresses"
Panek, Joel C. "Fragmentation of brittle polymeric toner line caused by swelling of paper substrate during immersion in water". Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/5808.
Pełny tekst źródłaVosgien, Lacombre Coralie. "Influence du taux de pigment sur la dégradation de revêtements polymères anticorrosion sous contraintes environnementales couplées". Thesis, La Rochelle, 2017. http://www.theses.fr/2017LAROS002/document.
Pełny tekst źródłaThis study focuses on the influence of titanium dioxide on the behavior of a model epoxy polymer resin. The considered systems are composites which contain titanium dioxide TiO2 as pigment and DGEBA-DAMP as epoxy resin. The studied amounts of titanium dioxide are 10 wt.% and 20 wt.%. Firstly, mechanical and thermal properties of totally cured free films are studied by DSC and DMA. The results of the composites are compared to those of the resin alone to better understand the impact of the titanium dioxide. Then, composite free films are immersed in pure water at different temperatures (30, 40, 50 and 60 °C) to investigate water uptake and diffusion coefficients by gravimetry. At each step of ageing, measurements of the properties are carried out to show the influence of water on our systems behaviors. Then, composites of epoxy resin and pigment are applied on steel panels and some samples are submitted to external mechanical stresses. These coatings are submitted to an environment of NaCl 3 wt.% saline solution and water uptake is followed by Electrochemical Impedance Spectroscopy (EIS). Swelling of composites coatings is followed by SECM in a last step of this work. Finally, a comparison of the results of pure resin and of composite gives access to the impact of titanium dioxide on the durability of these systems. It is mainly due to the presence of internal stresses
Augustine, Anusree. "Swelling induced debonding of thin hydrogel films grafted on silicon substrate : the role of interface physical-chemistry". Electronic Thesis or Diss., Université Paris sciences et lettres, 2022. http://www.theses.fr/2022UPSLS040.
Pełny tekst źródłaHydrogel coatings are transparent and hydrophilic polymer networks that absorb a lot of water and can be suitable candidates for anti-mist coatings. However, swelling-induced stresses within the film can result in detrimental debonding of hydrogel and may fail. In this study, these debonding processes are investigated in the relation to the grafting density at the film/substrate interface, so as to control and predict the failure of the coatings during swelling or under contact stresses. For that purpose, we have developed a methodology consisting in monitoring the initiation and the propagation of swelling-induced delamination from well-controlled preexisting interface defects.Surface-attached poly(dimethylacrylamide) (PDMA) hydrogel thin films are prepared on silicon wafers from the simultaneous Cross-Linking And Grafting (CLAG) of functionalized polymer chains by thiol-ene click chemistry. This strategy allows to tune the film thickness (0.1-2 µm) while ensuring a homogeneous crosslinking density. In order to vary the strength of the film/substrate interface, the silicon wafer is grafted by mixing reactive mercaptosilane and unreactive propylsilane in various proportions prior to the formation of the hydrogel film. We characterize the mercaptosilane surface fraction thus obtained by XPS and TOF-SIMS analyses. Well-controlled line defects (width between 2 and 100 µm) are also created to nucleate delamination of the hydrogel from the substrate.Swelling-induced debonding of the film is achieved under a constant vapor flow ensuring water saturation. Optical observations show the progressive debonding of the film from the pre-existing line defects under the action of localized swelling stresses. We obtain a delamination pattern of typical so-called telephone cord instability. We measure the debonding propagation velocity where the hydrogel is grafted to the substrate. The debonding rate is found to decrease over two orders of magnitude when the amount of mercaptosilane in the reactive silane mixture is increased from 10% to 100% while increasing the covalent bonds between hydrogel and substrate. A threshold thickness for debonding is also observed. This threshold thickness increases with the amount of mercaptosilane used to graft the substrate. We derived quantitative values of the interface fracture energy from the measured thickness threshold with a simple fracture mechanics model
Giambastiani, Mauricio. "Comportamento dependente do tempo de rochas sulfáticas de anidrita e gipso". Universidade de São Paulo, 2005. http://www.teses.usp.br/teses/disponiveis/18/18132/tde-18042006-112853/.
Pełny tekst źródłaThe purpose of this thesis is to contribute for the knowledge of time-dependent behavior of sulfatic rocks of anhydrite and gypsum. Emphasis is given to provide straightforward arguments about physical mechanisms responsible for creep observed in some underground excavations in those rocks in Europe. Explanation for this phenomena is not clear yet and studies about them are still scarce. The backbone idea behind this research is that the time-dependent behavior of anhydrite and gypsum is totally or at least partially due to rheological properties, and not exclusively due to swelling resulting from the anhydritegypsum transformation. This problem was investigated experimentally with specific tests. Free swelling tests on anhydrite led to the conclusion that when immersed into distilled water, volume decrease due to dissolution is observed. Anhydrite samples in contact with a saturated solution of 'CA'SO IND.4' present a nonlinear relationship between axial strain and time, indicating swelling rate decreasing with time. Axial swelling rates vary between 0,3% and 2,4%/year. The new concept is that this swelling is due to the deposition of a continuous layer of gypsum composed by gypsum neo-crystals, and not due to hydration swelling of anhydrite, a usual with clay minerals. The transformation mechanism consists of anhydrite dissolution and later precipitation of gypsum under over-saturation condition of the solution. The mineralogical transformation takes place in nature under favorable conditions of temperature and solution saturation with 'CA POT.2+' and 'SO IND.4'POT.2-' ions. An alternative theory is proposed about creep of sulfatic rock masses based on crystallization forces resulting from the deposition of gypsum crystals in the rock masses joints. The use of thermodynamic formulations is proposed for concrete swelling due to the growth of ettringite and gypsum. Uniaxial compression creep tests show that both types of sulfatic rocks present elasto-visco-plastic behavior and axial and lateral strain rates of the order of '10 POT.-12' to '10 POT.-10' 'S POT.-1'. Triggering of secondary creep takes places under stresses of the order of 4 6 MPa for gypsum and 25 40 MPa for anhydrite. The analyses about the possible creep mechanisms were not consistent and no definite conclusion has been reached get. Apparently under low stresses diffusion and pressure dissolution mechanism dominate. Under intermediate stresses, intra- and inter crystalline displacement mechanisms seem to dominate, and under high stresses rock deform due to microcrack propagation. Creep tests monitored with acoustic emission devices show the occurrence of microseismic events attributed to microcrack propagation. Both axial swelling and creep rock are compatible with convergence rocks measured in some underground works excavated in sulfatic rock masses, following the central idea of this thesis
BARLA, MARCO. "Tunnels in swelling ground: simulation of 3D stress paths by triaxial laboratory testing". Doctoral thesis, Politecnico di Torino, 1999. http://hdl.handle.net/11583/2504404.
Pełny tekst źródłaArmstrong, Michelle Hine, Tepole Adrián Buganza, Ellen Kuhl, Bruce R. Simon i Geest Jonathan P. Vande. "A Finite Element Model for Mixed Porohyperelasticity with Transport, Swelling, and Growth". Public Library of Science, 2016. http://hdl.handle.net/10150/614631.
Pełny tekst źródłaCesaretti, Juan Manuel. "Mechanical stress and stress compensation in Hall sensors". Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/28202.
Pełny tekst źródłaLobosco, Vinicius. "On the Modelling of Mechanical Dewatering in Papermaking". Doctoral thesis, KTH, Fibre and Polymer Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3702.
Pełny tekst źródłaMost of the water fed into a paper machine is removedmechanically in the forming and press sections. One of thefactor which has an important influence on mechanicaldewatering, i.e. in both forming and pressing, is thestress-strain behaviour of the fibre network.
The focus of this thesis is on the development of improvedmathematical descriptions of the stress-strain behaviourexhibited by fibre networks in the forming and press sections.The first part of the thesis presents a physically based modelof the forming and densification of fibre mats in twin-wireformers. The model can calculate the ecect of the applicationof a varied load through the forming section. It was developedfrom mass and momentum balances of the fibre and liquid phases,the fibre mat stress-porosity relation and an expression forthe permeability as a function of the porosity. The fibre-matstress-porosity relation used is rate-independent and presentshysteresis. Simulations have been conducted to study theeffects of roll pressure, blade pulses, wire tension andbeating. The effect of sequential blade pressure pulses afterthe forming roll on the dewatering and the concentrationgradients could be characterised. The simulations alsoexhibited rewetting by expansion when the fibre mats left theforming roll. Increasing wire tension resulted in increaseddewatering, but the rate of increase diminished rapidly withincreasing tension. The simulation results also indicated thatbeating has a large influence on dewatering.
The second part of the thesis presents two models of therate-dependent stress-strain behaviour of the fibre networkthat is observed in wet pressing. The first model was based onthe approach pioneered by Perzyna (1966) for strain-ratedependent plasticity and was quite satisfactory for calculatingthe stress-strain behaviour of the fibre network in singlepress nips. It was successfully applied for studyingdensification and dewatering in both normal wet pressing andhigh temperature wet pressing. However, the first model onlyincludes rate dependence in the compression phase of thecompressionexpansion cycle; the expansion phase is treated asbeing rate independent
The second model of the stress-strain behaviour of the fibrenetwork treats both compression and expansion as being ratedependent, according to experimental observations. It is basedon the idea that the wet fibre web may be conceived as alayered network of restricted swelling gels. A swollen fibre isa restricted gel, the inner swelling pressure in a swollenfibre wall being balanced by the stresses in the fibre wallstructure. The observed rate dependence of wet webs in bothcompression and expansion phases was attributed to the flow ofwater out of and into the fibre walls. The second model gavepredictions that are in good agreement with results fromuniaxial experiments using pressure pulses of arbitrary shapefor both a single pulse and a sequence of pulses. It maytherefore be used as a general model for the rheologicalbehaviour of the wet fibre network in wet pressing, providedthe model parameters are estimated from experimental data withsmall experimental error.
KEYWORDS:Paper, modelling, dewatering, forming, wetpressing, fibre network stress, rheology, hysteresis,intra-fibre water, compressibility, structural stress,stress-strain, restricted gels, swelling.
Stamatialis, Dimitrios F., Dimitrios N. Soulas i Merope Sanopouloua. "Mechanisms of non-fickian micromolecular diffusion in glassy polymer films: analysis of experimental sorption and concurrent dilation kinetics in the light of a differential swelling stress model". Diffusion fundamentals 11 (2009) 10, S. 1-2, 2009. https://ul.qucosa.de/id/qucosa%3A13930.
Pełny tekst źródłaPhilip, Benjamin N. "Characterization and physiological role of aquaporins during desiccation and freezing in Eurosta solidaginis". Miami University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=miami1280843234.
Pełny tekst źródłaKsiążki na temat "Swelling stresses"
Grant, Sophie. Genius Foods: The Balance of Contrast in the Kitchen. Diabetes, Swelling, Biliary Calculations, Anti-Inflammatory Diet, Weight and Fat Liver Problems. Stress Free Meals to Heal the Immune System. Independently Published, 2020.
Znajdź pełny tekst źródłaCzęści książek na temat "Swelling stresses"
Wittke, Walter. "Consideration of Stresses and Deformations due to Swelling in Finite Element Analyses". W Rock Mechanics, 318–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-88109-1_7.
Pełny tekst źródłaNeu, Gerrit Emanuel, Florian Christ, Tagir Iskhakov, Christina Krikelis, Diego Nicolás Petraroia, Sven Plückelmann, Maximilian Schoen i in. "Tunnel Linings". W Interaction Modeling in Mechanized Tunneling, 253–327. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-24066-9_5.
Pełny tekst źródłaPlaas, Anna H. K., Meghan M. Moran, John D. Sandy i Vincent C. Hascall. "Aggrecan and Hyaluronan: The Infamous Cartilage Polyelectrolytes – Then and Now". W Advances in Experimental Medicine and Biology, 3–29. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-25588-5_1.
Pełny tekst źródłaBoersma, L., Yongsheng Feng i Xiaomei Li. "Osmotic Adjustment in Plant Cells Exposed to Drought and Temperature Stress: Can a Cause and Effect Hypothesis be Formulated and Tested?" W Mechanics of Swelling, 143–64. Berlin, Heidelberg: Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-642-84619-9_6.
Pełny tekst źródłaKolditz, Olaf, Tuanny Cajuhi, Ralf-Michael Günther, Holger Steeb, Frank Wuttke, Keita Yoshioka, Norbert Grunwald i Thomas Nagel. "Synthesis and Outlook". W SpringerBriefs in Earth System Sciences, 91–98. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-26493-1_6.
Pełny tekst źródłaKolditz, Olaf, Uwe-Jens Görke, Heinz Konietzky, Jobst Maßmann, Mathias Nest, Holger Steeb, Frank Wuttke i Thomas Nagel. "Synthesis and Outlook". W GeomInt–Mechanical Integrity of Host Rocks, 227–42. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-61909-1_6.
Pełny tekst źródłaSetton, Lori A., Weiyong Gu, W. Michael Lai i Van C. Mow. "Predictions of the Swelling-Induced Pre-Stress in Articular Cartilage". W Solid Mechanics and Its Applications, 299–320. Dordrecht: Springer Netherlands, 1996. http://dx.doi.org/10.1007/978-94-015-8698-6_17.
Pełny tekst źródłaGrimal, Etienne. "Contribution of Stress Measurements in Modelling Structures Affected by Concrete Swelling". W RILEM Bookseries, 392–99. Cham: Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-59349-9_45.
Pełny tekst źródłaLi, Sheng-Jie, Chao-Sheng Tang, Zhi-Guo Chen, Dong-Wei Wang, Bin Shi i Inyang Hilary. "Influence of Stress-Strain Boundary Conditions on the Swelling Behavior of Bentonite". W Proceedings of GeoShanghai 2018 International Conference: Fundamentals of Soil Behaviours, 679–88. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0125-4_76.
Pełny tekst źródłaKuhara, Kei, i Manabu Enoki. "Stress Analysis of the Swelling and Deswelling Process of Thermo-Responsive Gel". W Key Engineering Materials, 2215–18. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.2215.
Pełny tekst źródłaStreszczenia konferencji na temat "Swelling stresses"
Stellrecht, Eric, Bongtae Han i Michael Pecht. "Measurement of Hygroscopic Swelling in Mold Compounds and Its Effect on PEM Reliability". W ASME 2003 International Electronic Packaging Technical Conference and Exhibition. ASMEDC, 2003. http://dx.doi.org/10.1115/ipack2003-35252.
Pełny tekst źródłaLiu, Z. P., W. Y. Gu, W. M. Lai i V. C. Mow. "Analysis of One-Dimensional Confined Swelling of Charged-Hydrated Soft Tissues". W ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0289.
Pełny tekst źródłaHan, B., E. Stellrecht i M. Pecht. "Effect of Hygroscopic Swelling of Mold Compound on PEM Reliability". W ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42223.
Pełny tekst źródłaKaneshima, Takuma, Fuqiao Bai i Nobuo Morita. "Comprehensive Analysis of Borehole Stability with Temperature, Swelling, and Pore Pressure Change for Layered and Orthotropic Formations". W SPE/IADC International Drilling Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/204068-ms.
Pełny tekst źródłaWilliams, J. R., R. N. Natarajan i G. B. J. Andersson. "Prediction of Endplate Bulging With and Without Inclusion of Physiological Swelling Pressure and Strain Dependent Permeability and Porosity". W ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59409.
Pełny tekst źródłaOzaltun, Hakan, Herman Shen i Pavel Medvedev. "Numerical Simulation for Mechanical Behavior of U10Mo Monolithic Miniplates for Research and Test Reactors". W ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62114.
Pełny tekst źródłaCarrilho, Leo A. "Stress Analysis of the Pressurized-Water Reactor Control Rod Under Operating Conditions". W 2020 International Conference on Nuclear Engineering collocated with the ASME 2020 Power Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/icone2020-16872.
Pełny tekst źródłaTang, Changbing, Yongjun Jiao, Wenjie Li, Tao Qing, Yifei Miao i Ping Chen. "Numerical Simulation of Different Sizes Missing Pellet Surface Effects on Thermal-Mechanical Behaviors in Nuclear Fuel Rods". W 2016 24th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/icone24-60116.
Pełny tekst źródłaChahine, Nadeen O., Christopher C. B. Wang, Clark T. Hung i Gerard A. Ateshian. "Determination of Poisson’s Ratios of Bovine Articular Cartilage in Tension and Compression Using Osmotic and Mechanical Loading". W ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-32622.
Pełny tekst źródłaHolck, O., J. Bauer, T. Braun, H. Walter, O. Wittler, B. Wunderle i K. D. Lang. "Moisture transport and swelling stresses at moulding-compound substrate interfaces investigated by molecular modeling and finite element simulations". W 2013 14th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). IEEE, 2013. http://dx.doi.org/10.1109/eurosime.2013.6529958.
Pełny tekst źródłaRaporty organizacyjne na temat "Swelling stresses"
Lauritzen, T., W. L. Bell, G. M. Konze, J. M. Rosa, S. Vaidyanathan i F. A. Garner. Effects of tensile and compressive stresses on irradiation-induced swelling in AISI 316. [LMFBR]. Office of Scientific and Technical Information (OSTI), maj 1985. http://dx.doi.org/10.2172/5534996.
Pełny tekst źródłaTeysseyre, S. Effect of Swelling on Irradiation-Assisted Stress Corrosion Cracking. Office of Scientific and Technical Information (OSTI), lipiec 2017. http://dx.doi.org/10.2172/1483829.
Pełny tekst źródłaTeysseyre, Sebastien Paul. Study of the Effect of Swelling on Irradiation Assisted Stress Corrosion Cracking. Office of Scientific and Technical Information (OSTI), wrzesień 2016. http://dx.doi.org/10.2172/1364496.
Pełny tekst źródłaVorobjev, A. N., S. I. Porollo i Yu V. Konobeev. Irradiation creep and stress-enhanced swelling of Fe-16Cr-15Ni-Nb austenitic stainless steel in BN-350. Office of Scientific and Technical Information (OSTI), kwiecień 1997. http://dx.doi.org/10.2172/543298.
Pełny tekst źródłaSnyder, Victor A., Dani Or, Amos Hadas i S. Assouline. Characterization of Post-Tillage Soil Fragmentation and Rejoining Affecting Soil Pore Space Evolution and Transport Properties. United States Department of Agriculture, kwiecień 2002. http://dx.doi.org/10.32747/2002.7580670.bard.
Pełny tekst źródła