Gotowa bibliografia na temat „Structures crustales profondes”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Structures crustales profondes”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Rozprawy doktorskie na temat "Structures crustales profondes"
Gonçalves, Susana Ferreira D. S. "Geophysical characterization of the Crustal structures from Equatorial to North-East Brazilian margins". Electronic Thesis or Diss., Brest, 2023. https://theses.hal.science/tel-04619710.
Pełny tekst źródłaAdaptation and application of 3D gravity inversion with seismic constraint method to the study of the deep crustal structures of the Northwest Brazil passive margins. With a layer-stripping approach, the method has the capacity, robustness and coherency to study the geometry of the Moho discontinuity, or any other crustal layer, within the context of the passive margins environment. The obtained results have sufficient accuracy to distinguish transitions between different domains – continental domain, necking zones and oceanic domain. It is also capable to identify differences within the same domain when analyzing two parallel profiles, for example.Imaging of deep crustal structures with Reverse Time Migration method applied to two Wide-Angle Seismic data profiles, acquired by Ocean Bottom Seismometers and Land Seismic Stations. The method has capacity to image these type of structures in the two domains. The analysis of the two results is an important tool to investigate the shape and geometry of the necking zone even in profiles with asymmetric shooting. It is also shown the essential contribution of the refracted wavefield for its success.Merge of three sub-parallel Wide-Angle Seismic profiles in the Northwest area of Brazil into a unique profile of approximately 1800 km in length, providing an unique perspective on the evolution process of the opening of the South Atlantic Ocean. The merged profile showcases the similarities between the Equatorial and Central margins of the South Atlantic Ocean in spite of the different geodynamic processes and time of opening
Biari, Youssef. "Structure profonde de la marge Nord-Ouest Africaine". Thesis, Brest, 2015. http://www.theses.fr/2015BRES0080/document.
Pełny tekst źródłaThe NE American margin represents one of the best studied margins in the world, it was the subject of several scientific programs. In comparison, the conjugate NW African margin remains fairly unknown, only two deep seismic cruises were acquired: the SISMAR cruise (2001) offshore the Meseta and the DAKHLA cruise (2002) offshore the Sahara. The deep structure of the Canadian margin is known due to the SMART wide-angle seismic profiles 1, 2 and 3. The first objective of the MIRROR project was to acquire combined wide-angle and deep reflection seismic data offshore a segment conjugate to the SMART-1 profile. The comparison between the homologous segments of these two margins aimed to better understand the opening mechanism of the Central Atlantic Ocean. A comparison between Sismar, Dakhla and Mirror models shows that the continental crust is thicker in the north and thins toward the south. The width of the transition zone is narrower south and Sismar profiles are located on a sedimentary basin placed on a very thinned continental crust. Comparing the Mirror profile with that of the Canadian conjugate margin (Smart 1) shows that the thickness, the structure of the continental crust and the thinning is very similar. However, zones of exhumed and serpentinized mantle were imaged along the Canadian profile that have no conjugate on the African margin. Moreover, the thickness of the oceanic crust is variable with 8 km on the African side and only 3-4 km on the Canadian margin. Several hypotheses have been proposed to explain this difference (a) an age difference between the two types of crust (b) thickening associated with the passage of the Canary hotspot (c) an asymmetric accretion or (d) an accretion at slow to ultra-slow speading centers
Mihoubi, Abdelhafid. "Imagerie sismique de la structure profonde de la marge Algérienne orientale (secteur de Jijel) : implications en terme de potentiel pétrolier". Thesis, Brest, 2014. http://www.theses.fr/2014BRES0037/document.
Pełny tekst źródłaThis thesis has been conducted within the framework of the Algerian-French research cooperation program SPIRAL (Sismique Profonde et Investigations Régionales du Nord de l’Algérie). This project aims to study the deep structure of the Algerian margin. The area covered by this study focuses in the region of Jijel in eastern Algerian margin.The main objective of our thesis is to improve depth imaging of the Algerian margin using a combined approach of seismic techniques; wide-angle and multi- channel seismic data. The purpose of this thesis is to bring new knowledge to answer some questions about the nature of the crust, the area of continental -oceanic transition, the presence of Messinian salt, its distribution and relationship between surface sedimentary formations and crustal structures.This study presents the results of a deep seismic survey across the north Algerian margin, based on the combination of 2D multi-channel and wide-angle seismic data simultaneously recorded by 41 ocean bottom seismometers deployed along a North-South line extending 180 km off Jijel into the Algerian offshore basin, and 25 land stations deployed along a 100 km-long line, cutting through the Lesser Kabylia and the Tellian thrust-belt.In this study, our approach is a joint inversion of wide-angle seismic recordings (OBS, ocean bottom seismometers) and multi- channel seismic data (MCS). We conducted a series of first arrivals tomography, a joint inversion of reflected and refracted arrivals and gravity modelling. Since the solution of the inverse problem is not unique, two tomography programs were applied using the same data for the same study area; FAST (First Arrival Seismic Tomography) and Tomo2D. Tomography was followed by a joint inversion of reflected and refracted arrivals following an approach based on the combination of Kirchhoff prestack depth migration (PSDM) for MCS data and forward modelling of OBS. To check the consistency of the velocity model with gravity data, the free air anomaly was modeled.The final model obtained using forward modelling of the wide-angle data and pre-stack depth migration of the seismic reflection data provides an unprecedented view of the sedimentary and crustal structure of the margin. The sedimentary layers in the Algerian basin are 3.75 km thick to the north and up to 4.5 to 5 km thick at the foot of the margin. They are characterised by seismic velocities from 1.9 km/s to 3.8 km/s. Messinian salt formations are about 1 km thick in the study area, and are modelled and imaged using a velocity between 3.7 km/s to 3.8 km/s. The crust in the deep sea basin is about 4.5 km thick and of oceanic origin, presenting two distinct layers with a high gradient upper crust (4.7 km/s - 6.1 km) and a low gradient lower crust (6.2 km/s - 7.1 km/s). The upper mantle velocity is constrained to 7.9 km/s. The ocean-continent transition zone is very narrow between 15 km to 20 km wide. The continental crust reaches 25 km thickness as imaged from the most landward station and thins to 5 km over a less than 70 km distance. The continental crust presents steep and asymmetric upper and lower crustal geometry, possibly due to either asymmetric rifting of the margin, an underplated body, or flow of lower crustal material towards the ocean basin. Present-time deformation, as imaged from 3 additional seismic profiles, is characterized by an interplay of gravity-driven mobile-salt creep and active thrusting at the foot of the tectonically inverted Algerian margin
Thinon, Isabelle. "Structure profonde de la Marge Nord Gascogne et du Bassin Armoricain". Phd thesis, Université de Bretagne occidentale - Brest, 1999. http://tel.archives-ouvertes.fr/tel-00605279.
Pełny tekst źródłaMihoubi, Abdelhafid. "Imagerie sismique de la structure profonde de la marge Algérienne orientale (secteur de Jijel) : implications en terme de potentiel pétrolier". Electronic Thesis or Diss., Brest, 2014. http://www.theses.fr/2014BRES0037.
Pełny tekst źródłaThis thesis has been conducted within the framework of the Algerian-French research cooperation program SPIRAL (Sismique Profonde et Investigations Régionales du Nord de l’Algérie). This project aims to study the deep structure of the Algerian margin. The area covered by this study focuses in the region of Jijel in eastern Algerian margin.The main objective of our thesis is to improve depth imaging of the Algerian margin using a combined approach of seismic techniques; wide-angle and multi- channel seismic data. The purpose of this thesis is to bring new knowledge to answer some questions about the nature of the crust, the area of continental -oceanic transition, the presence of Messinian salt, its distribution and relationship between surface sedimentary formations and crustal structures.This study presents the results of a deep seismic survey across the north Algerian margin, based on the combination of 2D multi-channel and wide-angle seismic data simultaneously recorded by 41 ocean bottom seismometers deployed along a North-South line extending 180 km off Jijel into the Algerian offshore basin, and 25 land stations deployed along a 100 km-long line, cutting through the Lesser Kabylia and the Tellian thrust-belt.In this study, our approach is a joint inversion of wide-angle seismic recordings (OBS, ocean bottom seismometers) and multi- channel seismic data (MCS). We conducted a series of first arrivals tomography, a joint inversion of reflected and refracted arrivals and gravity modelling. Since the solution of the inverse problem is not unique, two tomography programs were applied using the same data for the same study area; FAST (First Arrival Seismic Tomography) and Tomo2D. Tomography was followed by a joint inversion of reflected and refracted arrivals following an approach based on the combination of Kirchhoff prestack depth migration (PSDM) for MCS data and forward modelling of OBS. To check the consistency of the velocity model with gravity data, the free air anomaly was modeled.The final model obtained using forward modelling of the wide-angle data and pre-stack depth migration of the seismic reflection data provides an unprecedented view of the sedimentary and crustal structure of the margin. The sedimentary layers in the Algerian basin are 3.75 km thick to the north and up to 4.5 to 5 km thick at the foot of the margin. They are characterised by seismic velocities from 1.9 km/s to 3.8 km/s. Messinian salt formations are about 1 km thick in the study area, and are modelled and imaged using a velocity between 3.7 km/s to 3.8 km/s. The crust in the deep sea basin is about 4.5 km thick and of oceanic origin, presenting two distinct layers with a high gradient upper crust (4.7 km/s - 6.1 km) and a low gradient lower crust (6.2 km/s - 7.1 km/s). The upper mantle velocity is constrained to 7.9 km/s. The ocean-continent transition zone is very narrow between 15 km to 20 km wide. The continental crust reaches 25 km thickness as imaged from the most landward station and thins to 5 km over a less than 70 km distance. The continental crust presents steep and asymmetric upper and lower crustal geometry, possibly due to either asymmetric rifting of the margin, an underplated body, or flow of lower crustal material towards the ocean basin. Present-time deformation, as imaged from 3 additional seismic profiles, is characterized by an interplay of gravity-driven mobile-salt creep and active thrusting at the foot of the tectonically inverted Algerian margin
Bouyahiaoui, Boualem. "Structure profonde et réactivation de la marge est-algérienne et du bassin adjacent (secteur d'Annaba), contraintes par sismique réflexion multitrace et grand-angle terre-mer". Thesis, Nice, 2014. http://www.theses.fr/2014NICE4116/document.
Pełny tekst źródłaIn this study, we determine the deep structure of the eastern Algerian basin and its southern margin in the Annaba region (easternmost Algeria), to better constrain the plate kinematic reconstruction in this region. This study is based on new geophysical data collected during the SPIRAL cruise in 2009 that included a wide-angle, 240-km-long, onshore-offshore seismic profile, multichannel seismic reflection lines, and gravity and magnetic data, which was complemented by the available geophysical data for the study area. The analysis and modeling of the wide-angle seismic data using travel-times and amplitudes, and integrated with the multichannel seismic lines, reveal the detailed structure of an ocean-to-continent transition. In the deep basin, there is an ~5.5-km-thick oceanic crust that is composed of two layers. The upper layer of the crust is defined by a high velocity gradient and P-wave velocities between 4.8 km/s and 6.0 km/s from the top to the bottom. The lower crust is defined by a lower velocity gradient and P-wave velocity between 6.0 km/s and 7.1 km/s. The Poisson ratio in the lower crust deduced from S-wave modeling is 0.28, which indicates that the lower crust is composed mainly of gabbros. Below the continental edge, a typical continental crust with P-wave velocities between 5.2 km/s and 7.0 km/s from the top to the bottom shows a gradual seaward thinning of ~15 km over an ~35-km distance