Gotowe bibliografie tematyczne / Strips

Gotowa bibliografia na temat „Strips”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 31 lipca 2024

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Spis treści

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Strips”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Strips"

1

Jankowiak, Iwona, i Arkadiusz Madaj. "Numerical Analysis of Effectiveness of Strengthening Concrete Slab in Tension of the Steel-Concrete Composite Beam Using Pretensioned CFRP Strips". Civil and Environmental Engineering Reports 27, nr 4 (20.12.2017): 5–15. http://dx.doi.org/10.1515/ceer-2017-0046.

Pełny tekst źródła
Streszczenie:
Abstract One of the methods to increase the load carrying capacity of the reinforced concrete (RC) structure is its strengthening by using carbon fiber (CFRP) strips. There are two methods of strengthening using CFRP strips - passive method and active method. In the passive method a strip is applied to the concrete surface without initial strains, unlike in the active method a strip is initially pretensioned before its application. In the case of a steel-concrete composite beam, strips may be used to strengthen the concrete slab located in the tension zone (in the parts of beams with negative bending moments). The finite element model has been developed and validated by experimental tests to evaluate the strengthening efficiency of the composite girder with pretensioned CFRP strips applied to concrete slab in its tension zone.
Style APA, Harvard, Vancouver, ISO itp.
2

BUCHER, O., R. A. HOLLEY, R. AHMED, H. TABOR, C. NADON, L. K. NG i J. Y. D'AOUST. "Occurrence and Characterization of Salmonella from Chicken Nuggets, Strips, and Pelleted Broiler Feed". Journal of Food Protection 70, nr 10 (1.10.2007): 2251–58. http://dx.doi.org/10.4315/0362-028x-70.10.2251.

Pełny tekst źródła
Streszczenie:
Raw, frozen chicken nuggets and strips have been identified as a significant risk factor in contracting foodborne salmonellosis. Cases of salmonellosis as a result of consuming partly cooked chicken nuggets may be due in part to Salmonella strains originating in broiler feed. This study was undertaken to determine the occurrence and characterize the strains of Salmonella contaminating chicken nuggets, strips, and pelleted feeds, in an attempt to demonstrate whether the same Salmonella strains present in broiler feed could be isolated from raw, frozen chicken nuggets and strips available for human consumption. Salmonellae were recovered using the Health Canada MFHPB-20 method for the isolation and identification of Salmonella from foods. Strains were characterized by serotyping, phage typing, antimicrobial resistance typing (R-typing), and by pulsed-field gel electrophoresis (PFGE). Salmonellae were isolated from 25-g samples in 27% (n = 92) of nugget and strip samples, 95% (n = 20) of chicken nugget meat samples, and from 9% (n = 111) of pelleted feed samples. Salmonella Heidelberg, Salmonella Enteritidis, and Salmonella Orion were the most commonly isolated serovars from chicken nuggets and strips, nugget and strip meat, and pelleted broiler feeds, respectively. Salmonella Enteritidis phage type (PT) 13a with PFGE pattern SENXAI.0006 and R-type sensitive as well as Salmonella Enteritidis PT13a with PFGE pattern SENXAI.0068 and R-type sensitive were isolated from pelleted feed, and chicken nugget and strip meat in two separate instances. Data showed that Salmonella strains isolated from broiler feed were indistinguishable from strains isolated from packaged raw, frozen chicken nuggets and strips. However, results did not rule out the possibility that breeding stock or contamination during processing may have contributed to chicken meat contamination by Salmonella.
Style APA, Harvard, Vancouver, ISO itp.
3

ZHANG, HAIXIA, DI ZHANG, XIAO QIN, HUI WANG i LIN LI. "STUDY OF THE TRANSVERSAL DEFORMATION OF CORNEAL STRIP UNDER UNIAXIAL LOADING". Journal of Mechanics in Medicine and Biology 18, nr 07 (listopad 2018): 1840018. http://dx.doi.org/10.1142/s0219519418400183.

Pełny tekst źródła
Streszczenie:
Uniaxial test is easy to access and to obtain accuracy data, but it is difficult to acquire two-dimensional deformation information. We investigated the relationship between the two strain components of corneal strip in uniaxial tests, which is the basis for determining of anisotropic strain energy function of cornea via uniaxial tests. Nine rabbits were taken. The left and right corneas were cut along superior-inferior (SI) and nasal-temporal (NT) direction, respectively. For each strip the uniaxial test was carried out, and the tensile displacements, strip images and loads were recorded. Then the stretching strain, the transversal strains and stress were obtained. Optimization based inverse analysis was utilized to find the best among six fitting models that characterizes the relationship between two strain components in uniaxial tests. All models fitted well the experimental data gathered for corneal strips ([Formula: see text]). According to the model selection index, the power model achieved the best performance index: 0.1268 for SI strips and 0.1063 for NT strips versus 0.151 (SI strips) and 0.107 (NT strips) found at most by other models. Thus, it is the most suitable one for describing the relationship between the two strain components of corneal strip during uniaxial stretching.
Style APA, Harvard, Vancouver, ISO itp.
4

Rai, Sumit, Mukta Tandon, Narendra Pal Singh, Vikas Manchanda i Iqbal Rajinder Kaur. "Development, optimization, standardization, and validation of a simple in-house agar gradient method to determine minimum inhibitory concentration of vancomycin for Staphylococcus aureus". Journal of Laboratory Physicians 11, nr 03 (lipiec 2019): 220–28. http://dx.doi.org/10.4103/jlp.jlp_11_19.

Pełny tekst źródła
Streszczenie:
Abstract BACKGROUND: The Clinical and Laboratory Standards Institute recommends reporting minimum inhibitory concentration (MIC) values of vancomycin for Staphylococcus aureus. Commercial MIC strips are expensive, and the traditional broth microdilution method is cumbersome. With this background, we attempted to develop and standardize an in-house agar gradient method to determine MIC values of vancomycin for S. aureus. OBJECTIVES: To develop and validate an in-house vancomycin MIC strip, based on simple agar gradient method for S. aureus as per bioassay development guidelines. MATERIALS AND METHODS: Filter paper gradient strips were made in house and impregnated with varying concentrations of vancomycin to create an antibiotic gradient. During standardization, MICs of ninety clinical strains of S. aureus and ATCC 29213 were tested by the broth microdilution and commercial strip followed by the in-house strip. During the validation stage, MICs of ninety different clinical strains of S. aureus and ATCC 29213 were determined by the in-house strip followed by MIC detection by broth microdilution and commercial strips. A reading of more than ± 1log2 dilution compared with broth microdilution was considered as an outlier. RESULTS: During the initial stage, there were 7/90 outliers in the clinical strains, and no outliers were seen with the ATCC 29213 control strain. Corrective action included increasing precaution during the antibiotic impregnation on the strip. During validation stage, only 4/90 outliers were observed in the clinical strains. The commercial strips had 29/90 among clinical and 15/30 outliers in the control strain during the prevalidation phase. Despite maintaining cold chain during the validation phase, the outliers for commercial strip were 18/90 and 4/30 for clinical and control strains, respectively. CONCLUSION: Reporting vancomycin MIC for S. aureus may be attempted using the in-house method after validating it with a gold standard broth microdilution method and quality control as per protocol.
Style APA, Harvard, Vancouver, ISO itp.
5

Daamen, Markus, Daniel Dávalos Julca i Gerhard Hirt. "Tailored Strips by Welding, Strip Profile Rolling and Twin Roll Casting". Advanced Materials Research 907 (kwiecień 2014): 29–39. http://dx.doi.org/10.4028/www.scientific.net/amr.907.29.

Pełny tekst źródła
Streszczenie:
Conventional strips can be converted into tailored strips by further processing such as rolling and welding. Tailored strips have a thickness or thickness distribution which is designed according to the expected loads. A new approach for the production of tailored strips is the twin roll casting of profiled strips. This technology combines the advantages of direct strip casting and the production of steel strip with an optimized cross section. In this paper the achievable process limits regarding the geometry of tailored strips with varying thickness in the cross section made by strip profile rolling, twin roll casting and welding are discussed and compared. Furthermore, experiments to demonstrate the suitability of twin roll casting to produce tailored strips made of AISI 304 stainless steel are treated. A selected tailored strip geometry of 150 x 1.5 mm2 (width x thickness) with a difference in strip thickness of 33% over the width was cast.
Style APA, Harvard, Vancouver, ISO itp.
6

Haga, Toshio, Hiroshi Tsuge, Shinji Kumai i Hisaki Watari. "A Roll Caster to Cast Clad Strip". Key Engineering Materials 554-557 (czerwiec 2013): 1902–9. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1902.

Pełny tekst źródła
Streszczenie:
A tandem-type roll caster that can cast a three-layered clad strip was developed by mounting one twin roll caster on another twin roll caster. In this caster, the base strip is cast by the upper twin roll caster, and the overlay strips are cast by the lower caster. The three strips are metallurgically bonded by the lower caster. This study investigated three aspects of this caster. First, the clad ratio could be controlled by the solidification lengths of strips from the upper and lower twin roll casters, and a clad ratio of 1:8:1 was attained. Second, although it is known that fabrication of clad strips from Al-Mg alloy and other Al alloys is very difficult, the clad strip with the Al-Mg alloy as the base strip or the overlay strip could be cast. Finally, by adding scrapers, the caster could cast the clad strip with a base strip having a lower melting point than the overlay strip. Element strips of the clad strip are made by many processes, such as direct chill (DC) casting, scraping of the ingot surface, heat treatment, hot rolling, and cold rolling. Typically, surface treatment and hot rolling are used to clad the strips. Since many processes are required, clad strips require consume much energy. Therefore, producing clad strips is expensive. A vertical-type tandem twin roll caster was developed to cast clad strips. This caster has the advantages of process saving and energy saving, and so can fabricate economical clad strips. In the fabrication of clad strips, control of the clad ratio is very important. In the brazing sheet for automobile radiators, the base strip is made from AA3003 and the overlay strips are made from AA4045, and the clad ratio is usually 1:8:1. In the present study, a clad strip with a clad ratio of 1:8:1 was attained. The cladding by hot rolling of Al-Mg and other aluminum alloys, which is considered to be a very difficult process, was also investigated. Clad strips with either a base strip or an overlay strip of an Al-Mg alloy were cast by the roll caster. Although the cladding was not easy, the Al-Mg alloy could be cast into the clad strip. In addition, a clad strip with a base strip having a lower melting point than that of the overlay strip was investigated. Such cladding cannot be cast by the vertical-type tandem twin roll caster as mentioned above because the base strip is re-melted from the heat of the overlay strips. In the present study, a scraper was developed and adopted to cast a clad strip with a base having a lower melting point than that of the overlay strips. This type of clad strip could be cast because the scrapers prevented the re-melting of the base strip. In this paper, these three aspects of fabrication are reported.
Style APA, Harvard, Vancouver, ISO itp.
7

Gao, Huilin, Jian Feng, You Yin, Wanjin Hu, Yang Qu i Mingguo Liu. "Effect of strip shelterwood-cuts on the crown morphology plasticity of natural regenerated Pinus tabuliformis saplings in northeastern China". PeerJ 8 (26.08.2020): e9826. http://dx.doi.org/10.7717/peerj.9826.

Pełny tekst źródła
Streszczenie:
The study analysed the effect of shelterwood-cut strips on the outermost crown profiles and crown characteristics of naturally regenerated Pinus tabuliformis saplings in northeastern China. A total of 49 regenerated saplings from shelterwood-cut strips and 30 from uncut strips were collected. Nonlinear quantile regression was used to develop the outermost crown profile model for the saplings from the shelterwood-cut and uncut strips. The quantile value suitable for describing the outermost crown profiles of the two types of strips was selected using nonparametric boundary regression. The difference in crown morphologies between the shelterwood-cut strips and uncut strips was compared. The results showed that with the same diameter at breast height, the crown radii of the uncut strip saplings were larger than those of the shelterwood-cut strip saplings within the range of 0.2–1.0 for the relative depth into the crown. The largest crown radius of the saplings from the uncut strips was larger than that of the saplings from the shelterwood-cut strips. The inflection points of the shelterwood-cut strip sapling crowns were larger than those of the uncut strip sapling crowns. The crown volume of the small uncut strip saplings was larger than that of the shelterwood-cut strip saplings, and the difference in crown volume decreased with increasing sapling size. The saplings in the early stage of the uncut strips showed a greater growth rate than those of the shelterwood-cut strips, but their growth rate slowed over the long term according to branch-length annual growth. The present study provides a reference for forest management strategy decision making in promoting natural regeneration.
Style APA, Harvard, Vancouver, ISO itp.
8

Nakamura, Ryoji, Masakazu Sawai, Ryoji Nakamura, H. Watari i S. Kumai. "Casting of Clad Strip by an Unequal Diameter Twin Roll Caster". Materials Science Forum 638-642 (styczeń 2010): 413–18. http://dx.doi.org/10.4028/www.scientific.net/msf.638-642.413.

Pełny tekst źródła
Streszczenie:
An unequal diameter twin roll caster which can cast clad strips was devised and assembled. The casting of the clad strip was tried, and fabrication of the clad strip was attained. This twin roll caster was planned for the process saving. The clad strip was assembled directly from AA3003 molten metal and AA4045 molten metal at speed of 20m/min. The Si-diffusion-area between the strips was very narrow, and the interface between the strips was clear. The strips were bonded firmly. The strips were not pealed by the cold rolling and the continuous bending.
Style APA, Harvard, Vancouver, ISO itp.
9

Zhang, Yang, Wenguang Li, Yijian Hu, Zhiquan Huang, Yan Peng i Zhibing Chu. "Microstructural Evolution and Mechanical Behavior of Pure Aluminum Ultra-Thin Strip under Roller Vibration". Metals 14, nr 6 (24.05.2024): 617. http://dx.doi.org/10.3390/met14060617.

Pełny tekst źródła
Streszczenie:
As the demand for lithium-ion batteries increases, higher quality requirements are being placed on pure aluminum ultra-thin strips, one of the main materials used in lithium-ion battery current collectors. Roller vibration during the rolling process of pure aluminum ultra-thin strips is unavoidable and significantly affects the quality of the strips. This paper uses 1A99 pure aluminum ultra-thin strips as raw materials and employs a controlled vibration method during the rolling process to obtain products under two conditions: stable rolling and vibrational rolling. The surface and cross-section of the aluminum strips were characterized using scanning electron microscopy (SEM), and the microstructure of the surface and cross-section was studied using electron backscatter diffraction (EBSD) technology. The results show that, during stable rolling, the surface quality of the aluminum strip is good without defects. Under vibration, obvious vibration marks appear on the surface of the aluminum strip, showing characteristics of peaks and troughs. With the increase in strain at the trough position, there is a transition from low-angle grain boundaries to high-angle grain boundaries, and the grain size is uneven at the peak and trough positions, with noticeable grain refinement at the troughs. At the same time, under the influence of vibration, the aluminum strip induces a different texture morphology from conventional rolling. Due to the different plastic strains at the peak and trough positions, a texture alternation phenomenon occurs at these positions. The tensile test results indicate that aluminum strips exhibit poor mechanical properties under roller vibration, with the reduction in mechanical performance primarily attributed to the uneven microstructure distribution caused by roller vibration.
Style APA, Harvard, Vancouver, ISO itp.
10

Sulastiningsih, I. M., Surdiding Ruhendi, Muh Yusram Massijaya, I. Wayan Darmawan i Adi Santoso. "Effects of Nodes on the Properties of Laminated Bamboo Lumber". Wood Research Journal 4, nr 1 (19.04.2017): 19–24. http://dx.doi.org/10.51850/wrj.2013.4.1.19-24.

Pełny tekst źródła
Streszczenie:
The objective of this study was to determine the effects of node on the properties of laminated bamboo lumber (LBL) glued with water based polymer-isocyanate adhesive. Bamboo strips for LBL fabrication were prepared from andong bamboo (Gigantochloa pseudoarundinacea) collected from private gardens in West Java. Each bamboo strip has dimension of 40 cm x 2 cm x 0.5 cm. The bamboo strips were assigned into 3 groups by the node positions: without node, with node position of 10 cm from one end of the bamboo strip, and with node position in the centre of the bamboo strip. Prior LBL fabrication, the bamboo strips were treated by cold soaking in 7% boron solution for 2 h. The laboratory scale 3-layer laminated bamboo lumbers were manufactured with 5 different layer compositions: all layers made of bamboo strips without node, inner layer made of bamboo strips with nodes at 10 cm from one end of the strip, inner layer made of bamboo strips with nodes at the centre of the strip, all layers made of bamboo strips with nodes at 10 cm from one end of the strip, and all layers made of bamboo strips with nodes at the centre of the strip. The glue spread and cold pressing time applied were 250 g/m2 and 1 h, respectively.The results showed that the average density, moisture content, thickness swelling, bending strength and compression strength of laminated bamboo lumbers were 0.74 g/cm3, 11.3%, 2.9%, 1090 kg/cm2,and560 kg/ cm2, respectively. No delamination occurred in all samples, indicating high bonding quality. The average bonding strength (dry test) of laminated bamboo lumbers was 70.3 kg/cm2. Several properties of laminated bamboo lumber were not significantly affected by the present of nodes in the bamboo strips except the thickness swelling and compression strength.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Strips"

1

Minks, Marlin. "Strips /". Online version of thesis, 1985. http://hdl.handle.net/1850/10111.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Bloom, Michael. "The bawdy politic : strips of culture and the culture of strip". Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=75963.

Pełny tekst źródła
Streszczenie:
This work develops a new approach to female strip dancing as cultural practice by using methods of cultural history, ethnographic field work and theoretical critique in order to reconstruct the historical setting in which strip dancing emerged, the varied sites where it continues to evolve, and the diverse interpretations of strip by its different practitioners.
Toward this end, the dissertation is divided into five major sections which link such forms of body movement and display to wider socio-historical movements of theory and practice; sexuality; commerce; pleasure and power; and culture.
It is then concluded that such small-scale or "stripped-down" studies following this model may advance critical understanding of human bodies and subjects in cultural theory and practice, by situating non-mechanistic notions of communication, culture and dance within detailed investigations that emphasize the complexity and specificity of the practice of everyday life.
Style APA, Harvard, Vancouver, ISO itp.
3

Ibrahim, Wael [Verfasser]. "Stress redistribution in steel reinforced concrete members strengthened with CFRP strips / Wael Ibrahim". Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2012. http://d-nb.info/101856098X/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Ramos, Romero Jose Francisco. "LODStrips:Continuous Level of Detail using Triangle Strips". Doctoral thesis, Universitat Jaume I, 2008. http://hdl.handle.net/10803/10480.

Pełny tekst źródła
Streszczenie:
In recent years, multiresolution models have progressed substantially. At the beginning, discrete models were employed in graphics applications, due mainly to the low degree of complexity involved in implementing them, which is the reason why nowadays they are still used in applications without high graphics requirements. Nevertheless, the increase in realism in graphics applications makes it necessary to use multiresolution models which are more exact in their approximations, which do not call for high storage costs and which are faster in visualization. This has given way to continuous models, where two consecutive levels of detail only differ by a few polygons and where, additionally, the duplication of information is avoided to a considerable extent, thus improving on the spatial cost offered by most discrete models.
Advances have been made in the use of new graphics primitives which minimize the data transfer between the CPU and the GPU, apart from trying to make use of the connectivity information given by a polygonal mesh. For this purpose, graphics primitives with implicit connectivity, such as triangle strips and triangle fans, have been developed. Many continuous models based on this type of primitives have been recently developed. In these last few years, graphics hardware performance has evolved outstandingly, giving rise to new techniques which allow the continuous models to accelerate even more.
In this work, we have improved the interactive render of polygonal meshes. To tackle the problem, we firstly studied fundamental techniques to efficiently render polygonal meshes and we later made use of geometry simplification and level of detail techniques. Thus, we defined a multiresolution model that represents a polygonal mesh at any given resolution. This approach is able to manage continuous level-of-detail by smoothly adapting mesh resolution to the application requirements. Moreover, the model was modified to take the maximum advantage of the recent GPU features. We also created a modified version of the model for being used in deforming meshes. Finally, we developed an independent library to integrate our model in real-time applications.
Style APA, Harvard, Vancouver, ISO itp.
5

Jenke, Peter. "Creating triangle strips from clustered point sets". Thesis, Högskolan i Gävle, Akademin för teknik och miljö, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-7686.

Pełny tekst źródła
Streszczenie:
To create a digital model of the surface of some object from a setof points, representing positions on the surface of this object, requiresinformation about the relationship between the points. This informa-tion is not immediatly accessible. Thus, for creating such a model itis necessary to establish relationsships between the points of the set.In addition, it should be possible to render the resulting modelas efficiently as possible. Modern graphics cards offer to send vertexinformations as triangle strips; by using triangle strips the informationabout the triangles can be compressed.This work is about a method for retrieving information about therelations between points in an unstructered spatial point set and trans-forming this information into triangle strips. It is based on the convexlayers of a planar point set and an algorithm for triangulating theannuli of the convex layers, which uses the Rotating Calipers.
Style APA, Harvard, Vancouver, ISO itp.
6

Liu, Hao. "Scattering from periodic array of parallel strips". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/NQ59228.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Lwadya, Mujanay. "The drying characteristics of mango fruit strips". Pretoria : [S.n.], 2005. http://upetd.up.ac.za/thesis/available/etd-07092008-145646/.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Jaffar, Mohammad Jawad. "Elastic strips in dry and lubricated contacts". Thesis, University of Leeds, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.237097.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Walker, Martin. "Flexural mechanics of creased thin metallic strips". Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/276917.

Pełny tekst źródła
Streszczenie:
The introduction of creases into thin sheets has a dramatic effect on their global mechanical properties. This can be observed by manipulating a crumpled piece of paper which has been unfolded; it no longer deforms in the same way as the original sheet. Creases have typically been modelled as singular hinge lines, often accompanied by a torsional spring to provide some opening resistance; however, the appropriate stiffness of these springs is unclear. In reality, creases have a discrete geometry based on the method they were formed. This dissertation investigates the flexural behaviour of a creased thin metallic strip and the influence of the crease geometry. When a strip is bent perpendicular to the crease, putting the crease region in tension and the strip edges in compression, initially torsional deformations occur which ultimately coalesce into a central localised flattened region. An analytical model of this flexural behaviour is developed, which idealises the crease as an initially circular segment. Predictions show the bending resistance increases as the crease decreases in size. The model predictions are compared to finite element analysis and experimental results showing excellent agreement. When a strip is bent in the opposite direction, with the crease region in compression and the strip edges in tension, a bistable snap-through occurs. The deformed shape is characterised by a sharp vertex on the crease line. An analytical model is developed by generalising a Gauss mapping approach, and used to predict the deformed shape. These predictions match experimental results well. This dissertation provides an understanding of the mechanics of creased thin strips, where the crease is given a discrete geometry, and explores the nature of localisation. It also provides the foundation to explore the mechanics of thin sheets featuring a network of creases. This offers the opportunity to improve the efficiency of thin shell structures by using creasing to optimise the mechanics, leading to reduced material use, more sustainable construction, and fuel savings from lighter vehicles.
Style APA, Harvard, Vancouver, ISO itp.
10

Stockan, Jennifer A. "Impacts of riparian buffer strips on biodiversity". Thesis, University of Aberdeen, 2013. http://digitool.abdn.ac.uk:80/webclient/DeliveryManager?pid=211222.

Pełny tekst źródła
Streszczenie:
Buffer strips alongside watercourses are now a widely accepted method of reducing nutrient and sediment run-off from agricultural land thereby improving water quality and meeting policy goals. However, this change in land use may have consequences for riparian biodiversity which have yet to be fully understood. This study investigated the impact of buffering on various aspects of biodiversity by comparing three types of margins in three river catchments in north east Scotland. Margins were categorised as unbuffered (open and unfenced), buffered (fenced-off vegetated) and wooded (long established woody vegetation - fenced and unfenced). Components of biodiversity studied included vegetation patterns, and the abundance, diversity, movement and assemblage composition of ground-dwelling arthropods focussing primarily, though not exclusively, on ground beetles (Coleoptera, Carabidae). This study further considered management options which may improve or enhance biodiversity. Evidenced changes in vegetation were associated with soil parameters (including decreasing pH), channel morphology, decreasing light availability and tree canopy cover, and bryophyte abundance along a successional gradient from unbuffered-buffered-wooded sites. Buffered and wooded sites showed lower activity density and species richness of ground beetles, but while one measure of functional diversity was high for wooded sites, buffered sites were found to have significantly lower values. Both species and trait assemblage structure of ground beetles were influenced by soil and vegetation, but also by features of buffer strip design such as width, length and age. Active management of sites through grazing or cutting increased ground beetle abundance, particularly hygrophilous species, but did not affect diversity. Radiotracking showed increased movement of ground beetles was correlated with intensity of grazing. Few truly riparian plant or arthropod species were identified indicating the process of buffering essentially 'terrestrialises' the riparian margins. The presence of a tree canopy layer appears to be the key instigator of change in soil conditions with vegetation and arthropods responding accordingly. Therefore planting and maintaining trees in buffer strips could be crucial to ensuring that functional diversity and associated ecosystem services are maintained. Active management through grazing or cutting could help in this regard. The results from this study suggest that rather than buffering all riparian margins within catchments, it is fundamentally important for biodiversity to maintain a mosaic of different successional stages and a diversity of habitats.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Strips"

1

Hawkins, Omar Smadi and Neal. Practice of Rumble Strips and Rumble Stripes. Washington, D.C.: Transportation Research Board, 2016. http://dx.doi.org/10.17226/23522.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

1924-, Sobol Donald J., red. Encyclopedia Brown's book of comic strips: Comic strips. Toronto: Bantam Books, 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Miller, Margaret J. Strips that sizzle. Bothell, WA: That Patchwork Place, 1992.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Gordon, Ian. Kid Comic Strips. New York: Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/978-1-137-55580-9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Russell, Eugene. Centerline rumble strips. Washington, D.C: Transportation Research Board, National Research Council, 2005.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

England, Bank of. Gilt strips update. London: Bank of England, 1996.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Staff, Carson-Dellosa Publishing. Word Strips Sentence Strips. Carson-Dellosa Publishing, LLC, 2000.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Kalitin, Ruslan. Strips. Independently Published, 2018.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Staff, Carson-Dellosa Publishing. White Word Strips Sentence Strips. Carson-Dellosa Publishing, LLC, 2000.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Clarke, Kirk. Binary Strip Puzzles: Over 1000 Mixed Strips. Independently Published, 2019.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Strips"

1

Blanco-Canqui, Humberto, i Rattan Lal. "Buffer Strips". W Principles of Soil Conservation and Management, 223–57. Dordrecht: Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-1-4020-8709-7_9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Aloupis, Greg, Jean Cardinal, Sébastien Collette, Shinji Imahori, Matias Korman, Stefan Langerman, Oded Schwartz, Shakhar Smorodinsky i Perouz Taslakian. "Colorful Strips". W LATIN 2010: Theoretical Informatics, 2–13. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12200-2_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Mielke, Alexander. "Necking of strips". W Hamiltonian and Lagrangian Flows on Center Manifolds, 109–19. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/bfb0097554.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Fink, Eugene. "Extended Strips Domain". W Changes of Problem Representation, 299–319. Heidelberg: Physica-Verlag HD, 2002. http://dx.doi.org/10.1007/978-3-7908-1774-4_12.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Enters, Thomas, i Justin Lee*. "Stripping the Strips". W Farmer Innovations and Best Practices by Shifting Cultivators in Asia-Pacific, 136–49. GB: CABI, 2023. http://dx.doi.org/10.1079/9781800620117.0007.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Gordon, Ian. "Why Kid Comics". W Kid Comic Strips, 1–11. New York: Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/978-1-137-55580-9_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Gordon, Ian. "America and Australia: Skippy and Ginger Meggs". W Kid Comic Strips, 13–36. New York: Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/978-1-137-55580-9_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Gordon, Ian. "America and France: Perry Winkle and Bicot". W Kid Comic Strips, 37–61. New York: Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/978-1-137-55580-9_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Gordon, Ian. "America and Britain: Dennis the Menace (s)". W Kid Comic Strips, 63–86. New York: Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/978-1-137-55580-9_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Gordon, Ian. "Comics Scholarship and Comparative Studies". W Kid Comic Strips, 87–90. New York: Palgrave Macmillan US, 2016. http://dx.doi.org/10.1057/978-1-137-55580-9_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Strips"

1

Bäuml, Gerhard. "Investigation into the Protection Effectiveness of Segmented Diverter Strips (Button Strips) and Solid Diverter Strips". W International Conference on Lightning and Static Electricity. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1999. http://dx.doi.org/10.4271/1999-01-2344.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Zemánek, Jaroslav. "Orbits in strips". W Perspectives in Operator Theory. Warsaw: Institute of Mathematics Polish Academy of Sciences, 2007. http://dx.doi.org/10.4064/bc75-0-27.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Minano, Mercedes. "Atlas Strips Upgrade". W VERTEX 2009 (18th workshop). Trieste, Italy: Sissa Medialab, 2010. http://dx.doi.org/10.22323/1.095.0036.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Parra, J. A., A. Sayanskiy, D. Zhirihin, S. B. Glybovski i J. D. Baena. "Validity of homogenization for Artificial Plasmas: Straight Strips Versus Zigzag Strips". W 2018 12th International Congress on Artificial Materials for Novel Wave Phenomena (Metamaterials). IEEE, 2018. http://dx.doi.org/10.1109/metamaterials.2018.8534144.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Guo, Qinglian, Kyoko Kato, Norio Sato i Yuko Hoshino. "An algorithm for extracting text strings from comic strips". W ACM SIGGRAPH 2006 Research posters. New York, New York, USA: ACM Press, 2006. http://dx.doi.org/10.1145/1179622.1179710.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Laverty, Rich. "Transient Stress Optimzation of Elastic and Viscoelastic Composite Strips". W SHOCK COMPRESSION OF CONDENSED MATTER - 2005: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2006. http://dx.doi.org/10.1063/1.2263618.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Zaharia, Luchian, Radu Comaneci, Constantin Baciu i Nicanor Cimpoesu. "The Evaluation of Strain, Microstructural Aspects and Some Mechanical Properties of Nano-Grained Aluminum Processed by Accumulative Roll Bonding Using 2, 3 and 4 Initial Strips". W ASME 2008 9th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2008. http://dx.doi.org/10.1115/esda2008-59234.

Pełny tekst źródła
Streszczenie:
The main objective of the paper is to present the refinement of grains when aluminum strips are exposed to Severe Plastic Deformation (SPD) by Accumulative Roll-Bonding (ARB). Also, the relationship between nano-grain size and the increase of some mechanical characteristics (yield stress, tensile strength) is investigated. The work presents a theoretical analysis of ARB process taking into account the effect of the initial number of strips stacked before rolling on the strain evolution. We proposed the ARB process analysis when the number of strips initially stacked is 2, 3 and 4 and the initial thickness of each strip before rolling is equal with the thickness of the laminated strip, so the thickness of initial strip is a multiple of thickness resulting from rolling. It is obvious that in the case of rolling with a multilayer initial stacked, each layer will be deformed with a bigger strain, so the bond will be realised easier, at lower working temperature and the grain refinement will be achieved by a smaller number of passes. For each case (2, 3 and 4 initial layers) the engineer and equivalent (von Mises) strain are calculated. From this analysis results that increasing the number of strips initially stacked increases the total strain and the grain size from the laminated strip achieve submicronic values after a smaller pass number. The micro-structural investigations, made with Atomic Force Microscope (AFM), show that nanometric grain appear at 5–6 equivalent strain for 2 initial stacked strips and at 3–4 equivalent strain for 4 initial stacked strips. The stress – strain curves for each case and evolution of yield stress, tensile strength and micro-hardness with the number of passes are presented.
Style APA, Harvard, Vancouver, ISO itp.
8

Yang, Chien-Yuh, Chun-Ta Yeh i Ting-Yu Lin. "Performance Comparison of Rectangular and Air-Foil Shapes Offset Strip Flow Paths Micro Heat Exchangers". W ASME 2007 5th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2007. http://dx.doi.org/10.1115/icnmm2007-30203.

Pełny tekst źródła
Streszczenie:
Six micro heat exchangers with rectangle, airfoil and shuttle type strips was designed and fabricated in the present work. Two major parameters were considered for heat transfer performance comparison. One is the effect of strip type and the other is the strip arrangement. From the test results, we may notice that for both rectangle and airfoil strips heat exchangers, those with shorter strips performed lower thermal resistance than those with longer strips. Furthermore, the heat exchangers with more strips have better heat transfer performance. However, the space between strips is limited by the fabrication techniques.
Style APA, Harvard, Vancouver, ISO itp.
9

Bahari, S. A., M. Ahmad, K. Nordin, M. A. Jamaludin, Mohamad Rusop, Rihanum Yahaya Subban, Norlida Kamarulzaman i Wong Tin Wui. "Tensile Mechanics of Bamboo Strips". W INTERNATIONAL CONFERENCE ON ADVANCEMENT OF MATERIALS AND NANOTECHNOLOGY: (ICAMN—2007). AIP, 2010. http://dx.doi.org/10.1063/1.3377866.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Elnady, Tamer, i Hans Bodén. "Hard Strips in Lined Ducts". W 8th AIAA/CEAS Aeroacoustics Conference & Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2002. http://dx.doi.org/10.2514/6.2002-2444.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Strips"

1

Tukey, John W., i James G. Veitch. Scrawl Strips, and Letter or B-Letter Strips: Depicting Marginals of Scatter Plots. Fort Belvoir, VA: Defense Technical Information Center, grudzień 1990. http://dx.doi.org/10.21236/ada238556.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Tukey, John W., i James G. Veitch. Scrawl Strips, and Letter or B-Letter Strips: Depicting Marginals of Scatter Plots. Fort Belvoir, VA: Defense Technical Information Center, maj 1991. http://dx.doi.org/10.21236/ada246231.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Arbuckle, J. Gordon. STRIPS Collaborator Survey: 2019 Results. Ames (Iowa): Iowa State University. Library, kwiecień 2020. http://dx.doi.org/10.31274/soc_las_reports-20200408-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

CORPS OF ENGINEERS WALTHAM MA NEW ENGLAND DIV. Buffer Strips for Riparian Zone Management. Fort Belvoir, VA: Defense Technical Information Center, styczeń 1991. http://dx.doi.org/10.21236/ada336633.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Giglio, Stefano, Bryan Kelly i Serhiy Kozak. Equity Term Structures without Dividend Strips Data. Cambridge, MA: National Bureau of Economic Research, kwiecień 2023. http://dx.doi.org/10.3386/w31119.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

El-Rayes, Khaled, Ernest-John Ignacio, Ramez Hajj, Omar Sallam i Mamdouh Al-Ghzawi. Noise Measurements of US-41 Transverse Rumble Strips. Illinois Center for Transportation, kwiecień 2023. http://dx.doi.org/10.36501/0197-9191/23-004.

Pełny tekst źródła
Streszczenie:
This report focuses on collecting and analyzing external and internal noise levels generated by the modified transverse rumble strips on US-41 that were reconstructed in October 2022. The goal is to enable a comparison with noise levels generated by the previous rumble strips that were constructed in the same location in 2019. This work is organized in three tasks: (1) observe and document the construction of the 2022 transverse rumble strips, (2) collect US-41 traffic flow data as well as external and internal noise levels generated by the 2022 transverse rumble strips, and (3) compare the collected external noise levels generated by the 2022 US-41 rumble strips to those generated by the 2019 US-41 rumble strips that were collected and reported in the related 2021 study. The comparison results demonstrate that the time-equivalent continuous sound pressure level (Leq) generated by the 2022 US-41 transverse rumble strips at the AASHTO T 390-recommended measurement distances of 25 and 50 feet were lower than those reported in the 2021 study.
Style APA, Harvard, Vancouver, ISO itp.
7

Chehab, Ghassan. Effectiveness and External Noise of Transverse Rumble Strip Designs. Illinois Center for Transportation, czerwiec 2022. http://dx.doi.org/10.36501/0197-9191/22-009.

Pełny tekst źródła
Streszczenie:
The report presents a case study motivated by comments and concerns from residents regarding high levels of noise originating from vehicles passing transverse rumble strips at the intersection of US-41 northbound and West Park Avenue in Highland Park, Illinois. The Illinois Department of Transportation seeks to reduce the exterior noise the rumble strips generate without compromising the safety they deliver. A review of the latest literature on the topic and state of practice by other state departments of transportation revealed the absence of an existing standard that mandates specific designs and, thus, lack of consistency among the agencies on a configuration that could be followed. To decide whether changes to the existing design are appropriate, a performance comparison with other candidate designs needs to be conducted. To that end, measurements of exterior noise levels at the rumble strips on US-41 and at the adjacent neighborhood were collected in the presence of continuous flow of traffic. The collected measurements serve as a baseline for comparison with noise emanating from modified or new transverse rumble strip designs that would be investigated for possible implementation in the future. Similar measurements were conducted for interior noise in a vehicle passing over the rumble strips at different speeds to study their effectiveness in alerting drivers of cautions ahead.
Style APA, Harvard, Vancouver, ISO itp.
8

Earle, L., i B. Sparn. Results of Laboratory Testing of Advanced Power Strips. Office of Scientific and Technical Information (OSTI), sierpień 2012. http://dx.doi.org/10.2172/1219753.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Turhollow, A. Costs of Producing Biomass from Riparian Buffer Strips. Office of Scientific and Technical Information (OSTI), wrzesień 2000. http://dx.doi.org/10.2172/814247.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

DuMez, Aaron, Aaron Gernetzke, Jason Krueger, Kaleb Schott, Joseph R. Vanstrom i Jacek A. Koziel. Economic Analysis and Utilization of Sustainable Row Strips. Ames: Iowa State University, Digital Repository, kwiecień 2018. http://dx.doi.org/10.31274/tsm416-180814-37.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Strips” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii