Zaloguj się

Gotowe bibliografie tematyczne / Stripline fed tapered slot antenna / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Stripline fed tapered slot antenna.

Artykuły w czasopismach na temat „Stripline fed tapered slot antenna”

Autor: Grafiati

Data publikacji: 6 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Stripline fed tapered slot antenna”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Schaubert, D. H., J. A. Aas, M. E. Cooley i N. E. Buris. "Moment method analysis of infinite stripline-fed tapered slot antenna arrays with a ground plane". IEEE Transactions on Antennas and Propagation 42, nr 8 (1994): 1161–66. http://dx.doi.org/10.1109/8.310008.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Nalumakkal, Priya Suresh, K. Maheshwara Reddy, K. J. Vinoy i Saurabh Shukla. "Wideband stripline fed tapered slot antenna with integral coupler for wide scan angle active phased array". IET Microwaves, Antennas & Propagation 12, nr 9 (4.04.2018): 1487–93. http://dx.doi.org/10.1049/iet-map.2017.0784.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Kim, Jung-Min, Kun-Wook Kim, Jong-Gwan Yook i Han-Kyu Park. "Compact stripline-fed meander slot antenna". Electronics Letters 37, nr 16 (2001): 995. http://dx.doi.org/10.1049/el:20010667.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Knott, P., i A. Bell. "Coaxially-fed tapered slot antenna". Electronics Letters 37, nr 18 (2001): 1103. http://dx.doi.org/10.1049/el:20010761.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Yao, Yuan, Wenhua Chen, Bin Huang i Zhenghe Feng. "Novel planar tapered‐slot‐fed UWB antenna". Microwave and Optical Technology Letters 50, nr 9 (wrzesień 2008): 2280–83. http://dx.doi.org/10.1002/mop.23657.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Sangster, A. J., P. Smith, E. McErlean, K. Sinclair i R. Jacobs. "Dual-polarised stripline fed slot antenna incorporating signal cancellation". IEE Proceedings - Microwaves, Antennas and Propagation 148, nr 6 (2001): 357. http://dx.doi.org/10.1049/ip-map:20010768.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Woo, Dong Sik, Kang Wook Kim i Hyun-Chul Choi. "A Broadband and High Gain Tapered Slot Antenna for W-Band Imaging Array Applications". International Journal of Antennas and Propagation 2014 (2014): 1–6. http://dx.doi.org/10.1155/2014/378527.

Pełny tekst źródła

Streszczenie:

A broadband and high gain tapered slot antenna (TSA) by utilizing a broadband microstrip- (MS-) to-coplanar stripline (CPS) balun has been developed for millimeter-wave imaging systems and sensors. This antenna exhibits ultrawideband performance for frequency ranges from 70 to over 110 GHz with the high antenna gain, low sidelobe levels, and narrow beamwidth. The validity of this antenna as imaging arrays is also demonstrated by analyzing mutual couplings and 4-element linear array. This antenna can be applied to mm-wave phased array, imaging array for plasma diagnostics applications.

Style APA, Harvard, Vancouver, ISO itp.

8

Meena, R., i A. R. Harish. "Parasitically Loaded Wideband CPW-Fed Tapered Slot Antenna". Journal of Electromagnetic Waves and Applications 25, nr 17-18 (styczeń 2011): 2399–408. http://dx.doi.org/10.1163/156939311798806167.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Lazaro, M. A. P., i R. Judaschke. "A 150-GHz CPW-fed tapered-slot antenna". IEEE Microwave and Wireless Components Letters 14, nr 2 (luty 2004): 62–64. http://dx.doi.org/10.1109/lmwc.2003.822572.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Löcker, C., T. Vaupel i T. F. Eibert. "Radiation Efficient Unidirectional Low-Profile Slot Antenna Elements for X-Band Application". Advances in Radio Science 3 (12.05.2005): 143–46. http://dx.doi.org/10.5194/ars-3-143-2005.

Pełny tekst źródła

Streszczenie:

Abstract. Slots in metallic ground planes are very promising candidates for conformal antenna applications. However, a low-profile unidirectional antenna requires a back reflector close to the slot and the resulting stripline feed causes strong excitation of parallel-plate modes. In this contribution, we consider unidirectional reflector-backed slot configurations with parallel-plate mode suppression by shorting pins. Starting from a parametric study with respect to shorting pin location and back reflector distance, we present a stripline-fed rectangular slot element with radiation efficiency of more than 80% and a bandwidth of about 5% at centre frequency 10GHz. A careful optimisation of shorting pin locations guarantees reliable parallel-plate mode suppression without deteriorating the slot radiation behaviour. Coupling coefficients between parallel and aligned rectangular slot elements are presented. For increased bandwidth applications, a bow-tie slot element with about 8% bandwidth and radiation efficiency of close to 80% is proposed.

Style APA, Harvard, Vancouver, ISO itp.

11

Huang, Chih-Yu, i Kin-Lu Wong. "Stripline-fed printed square spiral slot antenna for circular polarisation". Electronics Letters 34, nr 24 (1998): 2290. http://dx.doi.org/10.1049/el:19981644.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Ma, T. G., i C. H. Tseng. "An Ultrawideband Coplanar Waveguide-Fed Tapered Ring Slot Antenna". IEEE Transactions on Antennas and Propagation 54, nr 4 (kwiecień 2006): 1105–10. http://dx.doi.org/10.1109/tap.2006.872562.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Abbosh, A. M. "Miniaturized Microstrip-Fed Tapered-Slot Antenna With Ultrawideband Performance". IEEE Antennas and Wireless Propagation Letters 8 (2009): 690–92. http://dx.doi.org/10.1109/lawp.2009.2025613.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Qing, X. M., i Y. W. M. Chia. "Circularly polarised circular ring slot antenna fed by stripline hybrid coupler". Electronics Letters 35, nr 25 (1999): 2154. http://dx.doi.org/10.1049/el:19991474.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Hokmabadi, Alireza, Asghar Keshtkar, Alireza Bayat i Ahmad Keshtkar. "A CPW-fed tapered slot antenna with improved time and frequency domain characteristics". International Journal of Microwave and Wireless Technologies 9, nr 5 (21.11.2016): 1185–90. http://dx.doi.org/10.1017/s1759078716001288.

Pełny tekst źródła

Streszczenie:

In this paper, a miniaturized CPW-fed tapered slot antenna (TSA) with a modified CPW to slot-line transition structure was introduced. An air-bridge and tapered slot edge (TSE) structure was also employed to broaden the transition bandwidth. Through these applied modifications, negative features of the original TSA (limitation of transition) and antipodal Vivaldi antenna (bad cross-polarization) are both removed, while all the positive features remained. Results showed that the proposed structure offered a broad bandwidth of 2.6–20 GHz and also exhibited an appropriate current distribution with high radiation efficiency. The radiation pattern was stable in the working frequency band with good directivity, gain, and low cross-polarization. The proposed antenna structure also presented satisfactory time-domain characteristics. In this study, we confirmed the simulation results through data measurements.

Style APA, Harvard, Vancouver, ISO itp.

16

Liu, Jiashan, Hongda Lu, Zihao Li, Zhipeng Liu, Zhiyong Dong, Changjiang Deng, Xin Lv i Yong Liu. "Wideband Circularly Polarized Waveguide-Fed Antipodal Exponential Tapered Slot Antenna". IEEE Antennas and Wireless Propagation Letters 18, nr 9 (wrzesień 2019): 1912–16. http://dx.doi.org/10.1109/lawp.2019.2933539.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Wang, N. B., Y. C. Jiao, Y. Song, L. Zhang i F. S. Zhang. "A Microstrip-Fed Logarithmically Tapered Slot Antenna for Wideband Applications". Journal of Electromagnetic Waves and Applications 23, nr 10 (1.01.2009): 1335–44. http://dx.doi.org/10.1163/156939309789108543.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Zheng, Guiping, Ahmed A. Kishk, Allen W. Glisson i Alexander B. Yakovlev. "Slot antenna fed by a CPW line with tapered transition". Microwave and Optical Technology Letters 38, nr 6 (31.07.2003): 465–67. http://dx.doi.org/10.1002/mop.11091.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Santón, Pablo, Ruth De los Reyes i Juan Vicente Balbastre. "Cavity Backed Slot Antenna Fed by a Stripline with SIW Structure and Vertical Coaxial Transition for Microwave Solid-State Heating Applications". Electronics 11, nr 3 (20.01.2022): 327. http://dx.doi.org/10.3390/electronics11030327.

Pełny tekst źródła

Streszczenie:

This paper presents a new approach to feed multimode cavities used as microwave applicators for industrial and domestic microwave ovens using solid-state sources operating in the 2.45 GHz ISM (Industrial, Scientific and Medical) band (commonly used for industrial microwave applications). The feeding structure consists of a slot on the top side of the applicator cavity. The slot is fed by a shielded asymmetric stripline with a Substrate Integrated Waveguide structure (to preserve the stripline Transversal Electro-Magnetic (TEM) operation within the shield) and is N-connectorized. A first design of the antenna was obtained using state-of-the-art antenna theory assuming free-space radiation. Then, it was refined using a commercial simulation tool based on the Finite Element Method in the frequency domain to achieve VSWR values lower than 1.5 in the source bandwidth (from 2.42 to 2.48 GHz) when the antenna radiates into the applicator cavity. The design parameters of all the components making up this feeding structure are discussed throughout the paper. A prototype was built and measured in the laboratory. The experimental results are presented at the end of the paper along with the simulated ones, showing a very good agreement.

Style APA, Harvard, Vancouver, ISO itp.

20

He, Juntao, Xing Chen i Kama Huang. "A novel suspended stripline-fed printed square slot array antenna with high-gain". International Journal of RF and Microwave Computer-Aided Engineering 19, nr 6 (16.07.2009): 712–16. http://dx.doi.org/10.1002/mmce.20395.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

de Lera Acedo, E., E. Garcia, V. Gonzalez-Posadas, J. L. Vazquez-Roy, R. Maaskant i D. Segovia. "Study and Design of a Differentially-Fed Tapered Slot Antenna Array". IEEE Transactions on Antennas and Propagation 58, nr 1 (styczeń 2010): 68–78. http://dx.doi.org/10.1109/tap.2009.2036193.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Lu, Hongda, Xin Lv, Kai Zhou i Yong Liu. "Experimental realisation of micromachined terahertz waveguide‐fed antipodal tapered slot antenna". Electronics Letters 50, nr 8 (kwiecień 2014): 615–17. http://dx.doi.org/10.1049/el.2014.0327.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Zhi-hong Tu, Wen-Ao Li i Qing-Xin Chu. "Single-Layer Differential CPW-Fed Notch-Band Tapered-Slot UWB Antenna". IEEE Antennas and Wireless Propagation Letters 13 (2014): 1296–99. http://dx.doi.org/10.1109/lawp.2014.2332355.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Fei, Peng, Yong-Chang Jiao, Yang Ding i Fu-Shun Zhang. "A COMPACT COPLANAR WAVEGUIDE FED WIDE TAPERED SLOT ULTRA-WIDEBAND ANTENNA". Progress In Electromagnetics Research Letters 25 (2011): 77–85. http://dx.doi.org/10.2528/pierl11060208.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Woo, Dong Sik, Young-Ki Cho i Kang Wook Kim. "Balance Analysis of Microstrip-to-CPS Baluns and Its Effects on Broadband Antenna Performance". International Journal of Antennas and Propagation 2013 (2013): 1–9. http://dx.doi.org/10.1155/2013/651040.

Pełny tekst źródła

Streszczenie:

Amplitude and phase balances of two types of microstrip-(MS-) to-coplanar stripline (CPS) baluns have been analyzed through simulations and measurements, and their effects on broadband antenna performance are investigated. The impedance bandwidth of the balun determined by a back-to-back configuration can sometimes overestimate the balun operating bandwidth. With the conventional balun with a 180° phase delay line, it is observed that the balun balance over the operating frequencies becomes much more improved as the CPS length increases to over 0.1 λg. As compared with the conventional balun, the proposed MS-to-CPS balun demonstrated very wideband performance from 5 to over 20 GHz. With the proposed balun, amplitude and phase imbalances are within 1 dB and ±5°, respectively. Effects of the balun imbalance on overall broadband antenna performance are also discussed with a quasi-Yagi antenna and a narrow beamwidth tapered slot antenna (TSA).

Style APA, Harvard, Vancouver, ISO itp.

26

Ta, Son Xuat, Hosung Choo i Ikmo Park. "WIDEBAND DOUBLE-DIPOLE YAGI-UDA ANTENNA FED BY A MICROSTRIP-SLOT COPLANAR STRIPLINE TRANSITION". Progress In Electromagnetics Research B 44 (2012): 71–87. http://dx.doi.org/10.2528/pierb12080605.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Kim, H., i C. W. Jung. "Bandwidth enhancement of CPW fed tapered slot antenna with multi-transformation characteristics". Electronics Letters 46, nr 15 (2010): 1050. http://dx.doi.org/10.1049/el.2010.1624.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Singhal, Sarthak, Ankit Pandey i Amit Kumar Singh. "CPW-fed circular-shaped fractal antenna with three iterations for UWB applications". International Journal of Microwave and Wireless Technologies 9, nr 2 (12.10.2015): 373–79. http://dx.doi.org/10.1017/s1759078715001506.

Pełny tekst źródła

Streszczenie:

A coplanar waveguide (CPW)-fed circular-shaped fractal antenna with third iterative orthogonal elliptical slot for ultra-wideband applications is presented. The bandwidth is enhanced by using successive iterations of radiating patch, CPW feedline, and tapered ground plane. An impedance bandwidth of 2.9–20.6 GHz is achieved. The designed antenna has omnidirectional radiation patterns along with average peak realized gain of 3.5 dB over the entire frequency range of operation. A good agreement is observed between the simulated and experimental results. This antenna structure has the advantages of miniaturized size and wide bandwidth in comparison to previously reported fractal structures.

Style APA, Harvard, Vancouver, ISO itp.

29

MA, T. G. "A Planar Tapered-Slot-Fed Annular Slot Antenna with Band-Notched Characteristics for Ultra-Wideband Radios". IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences E88-A, nr 9 (1.09.2005): 2384–86. http://dx.doi.org/10.1093/ietfec/e88-a.9.2384.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Zhao, Hongxin, Yufu Li i Xiaoxing Yin. "Low Cross-Polarization Gaussian Tapered Post-Wall Slotline Antenna for Short Pulse Applications". International Journal of Antennas and Propagation 2017 (2017): 1–7. http://dx.doi.org/10.1155/2017/4852709.

Pełny tekst źródła

Streszczenie:

A Gaussian tapered slot antenna based on post-wall structured slotline for improvement of cross-polarization for ultra-wideband applications is proposed and experimentally demonstrated. The antenna is composed of two pairs of Gaussian tapered slotline which have the same structure printed on both sides of the PCB, two metallic via arrays positioned along the slot edges, and two terminal resistors. The metallic via arrays are used to reduce the characteristic impedance of the conventional slotline which form a post-wall slotline and thus can be fed by a coaxial connector directly. More importantly, the balanced symmetrical post-wall structure ensures low cross-polarization levels of the antenna. The Gaussian tapered edges and the terminal resistors diminish reflected signal and thus can enlarge the bandwidth significantly. Good agreements between the simulated and the measured results have been observed. Results show that the proposed antenna exhibits a −10 dB impedance bandwidth from 1.5 GHz to 20 GHz, a maximum realized gain of 12 dBi, and the broadside cross-polarization level is averaged about −32 dB in the lower frequency band and −25 dB in the higher frequency band with a maximum value of −22 dB in the whole working frequency band.

Style APA, Harvard, Vancouver, ISO itp.

31

Wu, Yanjie, Kang Ding, Bing Zhang, Jianfeng Li, Duolong Wu i Kun Wang. "Design of a Compact UWB MIMO Antenna without Decoupling Structure". International Journal of Antennas and Propagation 2018 (2018): 1–7. http://dx.doi.org/10.1155/2018/9685029.

Pełny tekst źródła

Streszczenie:

A compact high isolation ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna is designed. The proposed MIMO antenna consists of a rectangular monopole antenna and a slot antenna fed by two microstrip lines, respectively. To improve the impedance matching, a circular coupling structure is designed to feed the tapered slot antenna. The parasitic resonance introduced by the ground stub helps to extend the impedance bandwidth of monopole antenna at the upper UWB band. Commonly used complex decoupling or coupling structures are eliminated that endow the proposed antenna minimized foot print, which is preferred in mobile handset. Although without decoupling structure, high isolation is obtained between two antenna elements. Simulation and measurement verify the antenna’s desirable performance, showing a broad impedance bandwidth of 3.1–10.6 GHz with |S11| < −10 dB and |S21| < −20 dB over 3.4–10.6 GHz, and |S21| < −18 dB from 3.1–3.4 GHz.

Style APA, Harvard, Vancouver, ISO itp.

32

Lu, Hongda, Xin Lv i Yong Liu. "Radiation characteristics of terahertz waveguide‐fed circularly polarised antipodal exponentially tapered slot antenna". Electronics Letters 50, nr 16 (lipiec 2014): 1122–23. http://dx.doi.org/10.1049/el.2014.1448.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Saraereh, Omar A. "A MULTIBAND AND OMNIDIRECTIONAL, CPW-FED SINGLE-LAYER BASED DUAL TAPERED-SLOT ANTENNA". Progress In Electromagnetics Research C 70 (2016): 183–91. http://dx.doi.org/10.2528/pierc16112211.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Van Trinh, Thai, Son Trinh-Van, Kang-Yoon Lee, Youngoo Yang i Keum Cheol Hwang. "Design of a Low-Cost, Low-Sidelobe-Level, Differential-Fed SIW Slot Array Antenna with Zero Beam Squint". Applied Sciences 12, nr 21 (25.10.2022): 10826. http://dx.doi.org/10.3390/app122110826.

Pełny tekst źródła

Streszczenie:

This paper presents a low-cost, low-sidelobe-level, differential-fed, substrate-integrated waveguide (SIW)-based slot array antenna with zero beam squint. The antenna consists of two identical six-way unequal power dividers (PDs) and a 6 × 16 slot array and is realized on a single-layer substrate. The six-way unequal PD provides tapered amplitude and in-phase excitation for six SIWs, and each of them has 16 radiating slots. The 1 × 16 linear slot array on each SIW is excited using a differential feed to avoid undesired beam squinting across its operating band. A two-way hybrid waveguide (WG)-to-SIW E-plane PD is developed to provide equal amplitude and out-of-phase excitation for two six-way unequal power dividers. Moreover, metallic decoupling walls are implemented between two adjacent linear slot arrays to reduce E-plane external mutual coupling. An antenna prototype is fabricated and experimentally verified. The fabricated antenna shows that the measured −10 dB reflection bandwidth is 7.15% (9.57–10.28 GHz), with the achieved gain ranging from 20.30 to 21.92 dBi. A stable boresight beam is observed over the entire operating band. Furthermore, at the designed frequency of 10 GHz, peak SLLs of −29.1 dB and −29.4 dB are achieved in the E- and H-plane, respectively.

Style APA, Harvard, Vancouver, ISO itp.

35

Patre, Situ Rani, Soni Singh i S. P. Singh. "Study of trapezoidal toothed log-periodic antenna fed through tapered microstrip line-to-coplanar stripline transition". Microwave and Optical Technology Letters 57, nr 7 (27.04.2015): 1671–77. http://dx.doi.org/10.1002/mop.29163.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Trinh-Van, Son, Sung Chan Song, Seung-Hee Seo i Keum Cheol Hwang. "Waveguide Slot Array Antenna with a Hybrid-Phase Feed for Grating Lobe Reduction". International Journal of Antennas and Propagation 2016 (2016): 1–8. http://dx.doi.org/10.1155/2016/4825924.

Pełny tekst źródła

Streszczenie:

The design of a 112-element millimeter-wave waveguide slot array antenna to reduce the grating lobe level is presented. A hybrid-phase feeding technique combining a cophase feed and an alternating-phase feed is applied to facilitate the suppression of grating lobes. In addition, a stepped feed waveguide and offset coupling slots aligned in a line are employed to realize a tapered aperture distribution. As a result, grating lobe suppression of 8.1 dB was achieved on the diagonal planes compared to a conventional alternating-phase-fed waveguide slot array antenna. A prototype of the proposed antenna was fabricated and measured. The measured results show that the proposed antenna exhibits a −15 dB reflection bandwidth of 3.4%and an average realized gain of 26.72 dBi within the measured frequency range. Good agreement between the simulated and measured radiation patterns is also observed.

Style APA, Harvard, Vancouver, ISO itp.

37

Li, Xue-Ping, Gang Xu, Chang-Jiao Duan, Ming-Rong Ma, Shui-E. Shi i Wei Li. "Compact TSA with Anti-Spiral Shape and Lumped Resistors for UWB Applications". Micromachines 12, nr 9 (27.08.2021): 1029. http://dx.doi.org/10.3390/mi12091029.

Pełny tekst źródła

Streszczenie:

A novel compact tapered-slot-fed antenna (TSA) with anti-spiral shape and lumped resistors is presented for ultra-wideband (UWB) applications. Unique coplanar waveguide (CPW) to coplanar strip (CPS) feeding structure and exponential slot are designed to ensure the continuous current propagation and good impedance matching. With a pair of anti-spiral-shaped structure loadings at the end of the antenna, the radiation performance in lower operating band can be enhanced obviously. The typical resistor loading technique is applied to improve the time domain characteristics and expand the bandwidth. The fabricated prototype of this proposed antenna with a size of 53 × 63.5 mm2 was measured to confirm simulated results. The proposed antenna has S11 less than −10 dB in the range of 1.2–9.8 GHz, and the group delay result is only 0.4 ns. These findings indicate the proposed antenna can be taken as a promising candidate in UWB communication field.

Style APA, Harvard, Vancouver, ISO itp.

38

Lin, Fenghan, Yihong Qi i Yong-Chang Jiao. "A 0.7–20-GHz Strip-Fed Bilateral Tapered Slot Antenna With Low Cross Polarization". IEEE Antennas and Wireless Propagation Letters 12 (2013): 737–40. http://dx.doi.org/10.1109/lawp.2013.2270934.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Lin, F., Y. ‐C Jiao i Z. Zhang. "Strip‐fed tapered slot antenna with enhanced impedance bandwidth from 0.57 to 35 GHz". Electronics Letters 49, nr 17 (sierpień 2013): 1057–58. http://dx.doi.org/10.1049/el.2013.1920.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Ma, Han-Qing, i Tao Feng. "Antipodal linearly tapered slot antenna with reduced mutual coupling fed by substrate integrated waveguide". Microwave and Optical Technology Letters 53, nr 11 (19.08.2011): 2512–15. http://dx.doi.org/10.1002/mop.26368.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Kumar, Sachin, Gwan Hui Lee, Dong Hwi Kim, Nashuha Syifa Haunan, Hyun Chul Choi i Kang Wook Kim. "Compact Planar Super-Wideband Monopole Antenna with Four Notched Bands". Electronics 9, nr 8 (27.07.2020): 1204. http://dx.doi.org/10.3390/electronics9081204.

Pełny tekst źródła

Streszczenie:

A compact-sized planar super-wideband (SWB) monopole antenna with four notched bands is presented in this paper. The antenna consists of a rectangular ground plane and a circular radiator that is fed by a tapered microstrip feed line. The overall size of the antenna is 18 mm × 12 mm × 0.5 mm, and its impedance bandwidth (S11 ≤ −10 dB) ranges from 2.5 GHz to 40 GHz (bandwidth ratio of 16:1). Four notched bands are obtained using two inverted U-shaped slots, a split-ring resonator (SRR), and a meandered slot. The notched frequency bands can be adjustable by changing the parameters of parasitic slot elements, and the realized notched bands in this paper are Wi-MAX band (3.5 GHz), WLAN band (5.5 GHz), satellite communication X-band (7.5 GHz), and amateur radio band (10.5 GHz). The simulated and experimental results show good agreement with each other. The antenna possesses a high gain, super-wide impedance bandwidth, and omni-directional radiation patterns.

Style APA, Harvard, Vancouver, ISO itp.

42

Shuai, Chen-Yang, Guang-Ming Wang i Ya-Wei Wang. "A novel uniplanar wideband magneto-electric dipole antenna element". International Journal of Microwave and Wireless Technologies 9, nr 10 (8.08.2017): 1983–89. http://dx.doi.org/10.1017/s1759078717000861.

Pełny tekst źródła

Streszczenie:

A novel uniplanar wideband magneto-electric dipole antenna element is proposed in this paper. The proposed antenna is composed of the conventional bow-tie radiation patch as an electric dipole, a semi-circular loop, which works as a magnetic dipole, a coplanar ground plane, two directors with different lengths for enhancing gain, and a microstrip-to-coplanar stripline transition balun. The designed antenna adopts a small-size coplanar ground plane to achieve a uniplanar structure. Consequently, this method reduces the space size immensely and makes the antenna suitable for the array application. In addition, a tapered slot structure is utilized to improve impedance matching. The prototype of the proposed antenna was fabricated and measured. The measured results keep in good accordance with the simulated ones. The simulated results show that the proposed antenna obtains a broad impedance bandwidth of 60.5% from 2.25 to 4.20 GHz (voltage standing wave ratio [VSWR] ≤ 2) which can be applied for wireless local area network (WLAN) (2.4–2.484 GHz), worldwide interoperability for microwave access (WiMAX) (2.5–2.69/3.4–3.69 GHz), and long term evolution (LTE) (2.5–2.69 GHz). Meanwhile, the stable gain, low cross-polarization, stable unidirectional radiation patterns, and low back lobe are obtained within the operating frequency band. The array composed of the proposed antenna elements is also investigated in this paper.

Style APA, Harvard, Vancouver, ISO itp.

43

Zhang, Yingsong, Wei Hong i Zhenqi Kuai. "A SIW Fed Antipodal Linear Tapered Slot Planar Multi-Beam Antenna for Millimeter-Wave Application". Journal of electromagnetic engineering and science 10, nr 3 (30.09.2010): 175–78. http://dx.doi.org/10.5515/jkiees.2010.10.3.175.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Wu, Chen. "A K-band suspended microstripline-fed linear tapered slot antenna and its E-plane arrays". Microwave and Optical Technology Letters 41, nr 6 (2004): 451–55. http://dx.doi.org/10.1002/mop.20168.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Li, P., J. Liang i X. Chen. "Ultra-wideband elliptical slot antenna fed by tapered microstrip line with U-shaped tuning stub". Microwave and Optical Technology Letters 47, nr 2 (2005): 140–43. http://dx.doi.org/10.1002/mop.21104.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Remez, J., E. Zeierman i R. Zohar. "Dual-Polarized Tapered Slot-Line Antenna Array Fed by Rotman Lens Air-Filled Ridge-Port Design". IEEE Antennas and Wireless Propagation Letters 8 (2009): 847–51. http://dx.doi.org/10.1109/lawp.2009.2025063.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Liu, Xiaochun, Li Wang, Mingxi Zhang, Shaobin Liu i Guiqiang Du. "A Dual-Polarized Printed Antenna Based on a Tapered Slot SICL Balun for Airborne Radar Application". International Journal of Antennas and Propagation 2020 (14.03.2020): 1–13. http://dx.doi.org/10.1155/2020/7148969.

Pełny tekst źródła

Streszczenie:

The substrate-integrated coaxial line (SICL) is a potential transmission line due to its good characteristics of high efficiency, nondispersive, and single operational mode. A tapered slot SICL balun is proposed, which can realize the impedance transformation from the microstrip line to the coplanar strip line (CPS). At the same time, the proposed balun can transform the quasi-TEM mode of the microstrip line to the TEM mode of CPS. A printed dipole radiator is designed and is fed by the proposed SICL balun to achieve the impedance matching. The dual-polarized radiation mode is realized by employing two orthogonal printed dipoles. For each polarization radiator, the CPS is bended to avoided the occlusion of two polarization ports and realize the direct assembling of two orthogonal printed circuits. What is more, the assembling method is advantageous to improve the port isolation degree and decrease the cross polarization level. To improve the ratio of front to back (F/B) of the radiation pattern, a cylindrical metal cavity is adopted. According to the results of simulation and experiments, the VSWR of each port is lower than 2, the isolation degree between two polarization ports is higher than 20 dB, and the cross polarization level at the boresight is lower than −20 dB at the operational frequency. The patterns of two ports are almost symmetric, and high radiation efficiency is obtained. The experimental results of the principle prototype verify the design schemes of the balun and the dual-polarized antenna. The proposed dual-polarized antenna fed by the tapered slot SICL balun is suitable for the airborne radar application.

Style APA, Harvard, Vancouver, ISO itp.

48

Khan, Imran, Hongbing Qiu, Saeed Ur Rahman i Habib Ullah. "Compact Single Band Suppression Monopole Antenna for SWB Application". International Journal of Advanced Networking and Applications 14, nr 05 (2023): 5645–50. http://dx.doi.org/10.35444/ijana.2023.14509.

Pełny tekst źródła

Streszczenie:

This article describes the design of a miniatured monopole antenna with a band notch for use in super-wideband applications. The suggested antenna is fed by a triangular tapered micro-strip feed line and has a frequency range of 2.88 to 60 GHz (bandwidth ratio: 20.83:1) with |S11|<−10 dB, with the exception of the notched band for WLAN band at 4.35–6.45 GHz. The antenna’s overall dimensions are 23 × 14.5 × 1 mm3 which consists of F4B substrate having permittivity of 2.65 and 1mm thickness, a round-cornered beveled-shaped radiating element, and a roundcornered partial ground plane. To realize the band notch characteristic an inverted crescent shape slot is introduced in the radiator. This paper presents the simulated results for the suggested antenna. The results shows that the suggested antenna operates well over the whole operational BW (181.7%), making it a good choice for SWB applications.

Style APA, Harvard, Vancouver, ISO itp.

49

Zhang, Xiaobo, Saeed Ur Rahman, Qunsheng Cao, Ignacio Gil i Muhammad Irshad khan. "A Novel SWB Antenna with Triple Band-Notches Based on Elliptical Slot and Rectangular Split Ring Resonators". Electronics 8, nr 2 (10.02.2019): 202. http://dx.doi.org/10.3390/electronics8020202.

Pełny tekst źródła

Streszczenie:

In this paper, a wideband antenna was designed for super-wideband (SWB) applications. The proposed antenna was fed with a rectangular tapered microstrip feed line, which operated over a SWB frequency range (1.42 GHz to 50 GHz). The antenna was implemented at a compact size with electrical dimensions of 0.16 λ × 0.27 λ × 0.0047 λ mm3, where λ was with respect to the lowest resonance frequency. The proposed antenna prototype was fabricated on a F4B substrate, which had a permittivity of 2.65 and 1 mm thickness. The SWB antenna exhibited an impedance bandwidth of 189% and a bandwidth ratio of 35.2:1. Additionally, the proposed antenna design exhibited three band notch characteristics that were necessary to eradicate interference from WLAN, WiMAX, and X bands in the SWB range. One notch was achieved by etching an elliptical split ring resonator (ESRR) in the radiator and the other two notches were achieved by placing rectangular split ring resonators close to the signal line. The first notch was tuned by incorporating a varactor diode into the ESRR. The prototype was experimentally validated with, with notch and without notch characteristics for SWB applications. The experimental results showed good agreement with simulated results.

Style APA, Harvard, Vancouver, ISO itp.

50

Malekpoor, H. "Broadband Printed Tapered Slot Antenna Fed by CPW Fulfilled with Planar Artificial Magnetic Conductor for X-Band Operation". Advanced Electromagnetics 12, nr 1 (24.01.2023): 1–10. http://dx.doi.org/10.7716/aem.v12i1.2087.

Pełny tekst źródła

Streszczenie:

A low-profile printed slot antenna (PSA) backed by broadband planar artificial magnetic conductor (AMC) is introduced in this study. Firstly, a suggested PSA with the radiating tapered slots excited by coplanar-waveguide (CPW) is used to expand the bandwidth in the measured range of 9-11 GHz (S11≤ -10 dB). Then, the suggested planar AMC surface as the ground plane of the antenna is inserted into the PSA to gain improved radiation efficiency. The realized result from the PSA with the 9×9 planar AMC array exhibits -10 dB measured impedance bandwidth from 6.63 to 13.73 GHz (70%). The suggested PSA with AMC compared to the PSA without AMC exhibits a size reduction of 60%, enhanced bandwidth of 50%, and excellent impedance matching with a minimum value of almost -40 dB. The novel AMC unit cell is realized to operate at 10.14 GHz with an AMC bandwidth of 8-12.35 GHz (43.1%) for X-band operation. Besides, by loading a periodic AMC unit cells into PSA, a high gain of more than 11 dBi with uni-directional radiation patterns is achieved.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!