Gotowa bibliografia na temat „Stepped pressure filtration”

In accord with Darcy's law, the flow rate through a porous bed depends upon the pressure drop Δpc. In general, increasing Dpc leads to increased values of flow rate and average percentage solids in filtration operations. When cakes become super-compactible, their behavior undergoes an unexpected change in which both the flow rate and the percentage solids reach maximum values and thereafter are unaffected by increasing Δpc. The critical pressure drop ΔpcR is defined as that value at which the flow rate reaches 90% of its ultimate value. When Δpc is greater than DpcR and is doubled or tripled, the cake resistance approximately doubles or triples leaving the rate virtually unchanged. The super-compactibility problem is analyzed theoretically, and is verified by stepped pressure filtration experiments on different materials from Houston and Korea.

We investigated renal hemodynamics in isolated, perfused kidneys from rat models of diabetes and hypertension. Autoregulation and passive vascular responses were measured using stepped pressure ramps in the presence of angiotensin II (pEC50) or papaverine (0.1 mM), respectively. Male diabetic heterozygote m(Ren2)27 rats were compared with three male control groups: nondiabetic, normotensive Sprague-Dawley (SD) rats; nondiabetic, hypertensive heterozygote m(Ren2)27 rats; and diabetic, normotensive SD rats. Kidney function (proteinuria, creatinine clearance) was monitored before induction and at monthly intervals. Vascular function was measured in vitro in rats of induction age (6–8 wk) and at 2 and 4 mo postinduction. Renal flow correlated with age, but not diabetes or the Ren2 gene. Kidney weight-specific and body weight-specific renal flow differed between diabetic and nondiabetic rats because diabetic rats had higher kidney but lower body weights. Kidneys from all groups showed effective autoregulation in the presence of angiotensin II. The autoregulatory pressure threshold of m(Ren2)27 rats was higher, and the autoregulation pressure range was wider, compared with SD rats. When vascular smooth muscle activity was blocked with papaverine, pressure-flow responses differed between groups and with time. The m(Ren2)27 rat groups showed higher renal vascular resistance at lower pressures, suggesting greater vascular stiffness. In contrast, diabetic SD rat kidneys demonstrated reduced vessel stiffness. Flow was impaired in diabetic m(Ren2)27 rats at 4 mo, and this correlated with a decline in creatinine clearance. The results suggest that the characteristic late decline in renal filtration function in diabetes- and hypertension-related renal disease follows changes in renal vascular compliance.

Lai-Fook, Stephen J. Pleural Mechanics and Fluid Exchange. Physiol Rev 84: 385–410, 2004; 10.1152/physrev.00026.2003.—The pleural space separating the lung and chest wall of mammals contains a small amount of liquid that lubricates the pleural surfaces during breathing. Recent studies have pointed to a conceptual understanding of the pleural space that is different from the one advocated some 30 years ago in this journal (Agostoni E. Physiol Rev 52: 57–128, 1972). The fundamental concept is that pleural surface pressure, the result of the opposing recoils of the lung and chest wall, is the major determinant of the pressure in the pleural liquid. Pleural liquid is not in hydrostatic equilibrium because the vertical gradient in pleural liquid pressure, determined by the vertical gradient in pleural surface pressure, does not equal the hydrostatic gradient. As a result, a viscous flow of pleural liquid occurs in the pleural space. Ventilatory and cardiogenic motions serve to redistribute pleural liquid and minimize contact between the pleural surfaces. Pleural liquid is a microvascular filtrate from parietal pleural capillaries in the chest wall. Homeostasis in pleural liquid volume is achieved by an adjustment of the pleural liquid thickness to the filtration rate that is matched by an outflow via lymphatic stomata.

Batch sedimentation is a method that enables us to understand the mechanism of compaction and compression of sedimenting slurry. However, batch settling behaviour is a very complex phenomenon that is not easily described fully by a mathematical model. This causes unrealistically large empirical calculations when the thickener size estimations are required. Channelling, reverse concentration gradients and the initial concentration of the slurry have large effects on batch settling. Existing procedures do not provide clear relationships involving these three significant variables. In this study, batch sedimentation phenomena are examined in detail and possible explanations are given to clarify the complex behaviour using recent theories. Modern research has shown that channelling is an unwanted formation because channels can change the concentration at the bottom and top of the bed by carrying a great amount of flocs upwards. Batch sedimentation tests were performed using flocculated slurry of Calcium Carbonate at various initial concentrations such as 250 g/l, 500 g/l, 750 g/l and 1000 g/l to observe channelling and reverse concentration gradients. Flux plots for the batch system reveal behaviour which can be attributed to the upward flow of solids. In addition, photographic methods were used to observe settling processes, channelling mechanisms and flocs in the channels. One of the purposes of this work was to examine the phenomenological solid-liquid separation theory of Buscall and White (1987), which employs the material properties of the local volume fraction, compressive yield stress Py ()ö and hindered settling function R()ö to identify the material behaviour in batch sedimentation. Stepped-pressure filtration and batch settling tests were used to measure the material characteristics for the flocculated CaCO3 suspension. Experimental data were demonstrated using Height versus Time and Height versus Concentration graphs and displayed the possible region of reverse concentration gradients and channelling in the settling bed. Mathematical predictions adopted from Usher (2002) were performed employing material characteristics of the material and graphical documentations were presented. The results of mathematical predictions were compared to the experimental results and the modes of sedimentation explained by Lester et al. (2005). Fundamental theoretical models and experimental observations highlight that the main driving force for channelling is the high-pressure gradient at the bottom of the bed and the most important factors that cause channelling are high initial concentration of slurry and settling time. The predictions also show that the material and flocculant used for the batch settling tests demonstrate important effect on the settling process. The knowledge and information gained from this study is valuable to maximize the thickening process.

The Collaborative Initial Glaucoma Treatment Study (CIGTS) was a randomized clinical trial to determine whether patients with newly diagnosed open-angle glaucoma (OAG) were managed better by initial treatment with medications (using a stepped regimen of medications starting initially with a topical beta-blocker) or by immediate filtration surgery (trabeculectomy with or without 5-fluorouracil). Although the surgery group achieved a lower mean intraocular pressure (IOP) than the medication group, both groups had similarly low rates of visual field progression. Three measures of IOP fluctuation over extended time, the range of IOP, the standard deviation of IOP, and the maximum IOP, seem to play an important role in visual field progression The results showed that more aggressive treatment was warranted when undue elevation or variation in IOP measures is observed.