Gotowa bibliografia na temat „Steel – Inclusions”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Steel – Inclusions”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Steel – Inclusions"
Wang, Yan, Qing Xiao Li, Shuo Ming Wang i Peng Long Han. "Study of Inclusion’s Source and Character in Different T[O] Content". Advanced Materials Research 887-888 (luty 2014): 187–90. http://dx.doi.org/10.4028/www.scientific.net/amr.887-888.187.
Pełny tekst źródłaWang, Yuhang, Xian Zhang, Wenzhui Wei, Xiangliang Wan, Jing Liu i Kaiming Wu. "Effects of Ti and Cu Addition on Inclusion Modification and Corrosion Behavior in Simulated Coarse-Grained Heat-Affected Zone of Low-Alloy Steels". Materials 14, nr 4 (7.02.2021): 791. http://dx.doi.org/10.3390/ma14040791.
Pełny tekst źródłaWang, Linzhu, Zuobing Xi i Changrong Li. "Modification of Type B Inclusions by Calcium Treatment in High-Carbon Hard-Wire Steel". Metals 11, nr 5 (21.04.2021): 676. http://dx.doi.org/10.3390/met11050676.
Pełny tekst źródłaWang, Wanlin, Liwen Xue, Tongsheng Zhang, Lejun Zhou, Daoyuan Huang, Weiguang Tian i Jialin Xu. "Thermodynamics and transient behavior of the inclusion in Si deoxidized stainless steel for high-grade plate". Metallurgical Research & Technology 116, nr 6 (2019): 612. http://dx.doi.org/10.1051/metal/2019042.
Pełny tekst źródłaShen, Ping, i Jianxun Fu. "Morphology Study on Inclusion Modifications Using Mg–Ca Treatment in Resulfurized Special Steel". Materials 12, nr 2 (9.01.2019): 197. http://dx.doi.org/10.3390/ma12020197.
Pełny tekst źródłaYu, Huixiang, Muming Li, Jiaming Zhang i Dexin Yang. "Effect of Mn Content on the Reaction between Fe-xMn (x = 5, 10, 15, and 20 Mass pct) Steel and CaO-SiO2-Al2O3-MgO Slag". Metals 11, nr 8 (28.07.2021): 1200. http://dx.doi.org/10.3390/met11081200.
Pełny tekst źródłaZhu, Tengwei, Feng Huang, Jing Liu, Qian Hu i Wei Li. "Effects of inclusion on corrosion resistance of weathering steel in simulated industrial atmosphere". Anti-Corrosion Methods and Materials 63, nr 6 (7.11.2016): 490–98. http://dx.doi.org/10.1108/acmm-05-2015-1538.
Pełny tekst źródłaGu, Chao, Min Wang, Yanping Bao, Fuming Wang i Junhe Lian. "Quantitative Analysis of Inclusion Engineering on the Fatigue Property Improvement of Bearing Steel". Metals 9, nr 4 (24.04.2019): 476. http://dx.doi.org/10.3390/met9040476.
Pełny tekst źródłaXing, Zhiguo, Zhiyuan Wang, Haidou Wang i Debin Shan. "Bending Fatigue Behaviors Analysis and Fatigue Life Prediction of 20Cr2Ni4 Gear Steel with Different Stress Concentrations near Non-metallic Inclusions". Materials 12, nr 20 (21.10.2019): 3443. http://dx.doi.org/10.3390/ma12203443.
Pełny tekst źródłaZhou, Xiao Lei, Zhe Shi i Gui Fang Zhang. "The Evolution of Non-Metallic Inclusions in IF Steel". Applied Mechanics and Materials 696 (listopad 2014): 62–65. http://dx.doi.org/10.4028/www.scientific.net/amm.696.62.
Pełny tekst źródłaRozprawy doktorskie na temat "Steel – Inclusions"
Douglas, Brent A. "Nonmetallic inclusions in HSLA steel weldments". Thesis, Monterey, California. Naval Postgraduate School, 1989. http://hdl.handle.net/10945/27164.
Pełny tekst źródłaGregg, John Martin. "Ferrite nucleation on non-metallic inclusions in steel". Thesis, University of Cambridge, 1995. https://www.repository.cam.ac.uk/handle/1810/221878.
Pełny tekst źródłaKuyucak, Selçuk. "Direct detection of non-metallic inclusions in molten iron". Thesis, McGill University, 1985. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63356.
Pełny tekst źródłaRuoru, Ke. "Pitting corrosion on sulphide inclusions in stainless steel 316". Thesis, University of Surrey, 1988. http://epubs.surrey.ac.uk/847585/.
Pełny tekst źródłaNakajima, Hidemasa. "On the detection and behaviour of second phase particles in steel melts". Thesis, McGill University, 1986. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=75341.
Pełny tekst źródła1. Slag droplet entrainment/dispersion is an axisymmetric gas injection stirred system was investigated: A tank containing a water-olive oil simulation of stirred ladles of molten steel was used. Extensive numerical predictions of the oil (slag) droplet population distributions within the vessel were also carried out, and reasonable agreement with the experimental data achieved. Droplet dispersions were shown to be time and spatially dependent.
2. Inclusion separation characteristics in tundishes of continuous steel casting operations were investigated. The mixed reactor model proved to be adequate for predicting particle separation behaviour, proved that the effective upper surface area of the dispersed plug flow region is known, a priori.
3. An on-line method for the detection and measurement of inclusions in molten steel systems was developed. Inclusion removal rates within an induction furnace, as well as inclusion separation behaviour in a commercial scale tundish for continuous billet casting, were measured.
Hussain, I. "A comparison of the cleanliness of steels treated with calcium-silicon and magnesium". Thesis, University of Wolverhampton, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234259.
Pełny tekst źródłaDeng, Zhiyin. "Study on the Interaction between Refractory and Liquid Steel Regarding Steel Cleanliness". Doctoral thesis, KTH, Mikro-modellering, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-190071.
Pełny tekst źródłaQC 20160816
Söder, Mats. "Growth and removal of inclusions during ladle refining". Doctoral thesis, KTH, Materials Science and Engineering, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-45.
Pełny tekst źródłaThe overall purpose of this thesis work has been to further our understanding of the growth and removal of inclusions in gas- and induction-stirred ladles. The primary focus has been on alumina inclusions.
Growth mechanisms were studied using data from fundamental mathematical models of gas- and induction-stirred ladles. The results showed the turbulence mechanism to be the most dominant in alumina inclusion growth. The dynamic growth and removal of inclusions in a gas-stirred ladle was studied using mathematical modelling. The model results showed concentration gradients of inclusions. The effect was most obvious in the steel flow past the removal sites: top slag, ladle refractory, and gas plume (bubble flotation). A new removal model was developed for large spherical caps bubbles.
In order to verify the predicted concentration gradients for the size population of inclusions, three experiments were carried out in production. The sampling equipment enabled sampling at five different positions and different locations at the same time. The results showed that concentration gradients of inclusions do exist both in induction-stirred and gas-stirred ladles. A theoretical analysis showed that the drag force on the inclusions to be the dominating force and that therefore inclusions follow the fluid flow.
The cluster behaviour of alumina inclusions were examined on steel samples taken in an industrial-scale deoxidation experiment in a ladle. The samples were examined by microscope and the results used to study cluster growth. It was found that there was rapid cluster growth due to collision during stirring and that at the end of the deoxidation experiment a majority of the small inclusions were bound in clusters. The cluster growth data determined using the microscopic results were compared with predicted cluster-growth data. A method was developed for converting the experimental data observed per unit area into data given per unit volume and vice versa. An expression for the collision diameter of the cluster was also developed. The results showed that the predicted cluster growth agreed well with the microscopic observations for the assumptions made in the growth model.
Tian, Chenguo. "On the removal of non-metallic inclusions from molten steel through filtration". Thesis, McGill University, 1990. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=59991.
Pełny tekst źródłaIn this investigation, attempts have been made to remove these non-metallic inclusions by passing the liquid steel through a ceramic filter. It was found that this approach is very effective for removing solid non-wetting inclusions such as alumina. It appeared that liquid silicates could also be removed to some degree.
Dey, Arghya. "The effect of steel composition on the behaviour of inclusions during steelmaking". Thesis, University of Sheffield, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.500451.
Pełny tekst źródłaKsiążki na temat "Steel – Inclusions"
Kiessling, Roland. Non-metallic inclusions in steel. London: Institute of Metals, 1989.
Znajdź pełny tekst źródłaPytel, Stanisław. Ocena odkształcalności wtrąceń niemetalicznych w stali. Kraków: Politechnika Krakowska im. Tadeusza Kościuszki, 1989.
Znajdź pełny tekst źródłaDouglas, Brent A. Nonmetallic inclusions in HSLA steel weldments. Monterey, Calif: Naval Postgraduate School, 1989.
Znajdź pełny tekst źródłaInternational, Symposium on the Control and Effects of Inclusions and Residuals in Steels (2nd 1986 Toronto Ont ). Proceedings, International Symposium on the Control and Effects of Inclusions and Residuals in Steels: A symposium. Montreal, Quebec: Canadian Institute of Mining and Metallurgy, 1986.
Znajdź pełny tekst źródłaKemeny, Frank. Review of deoxidation practice. Des Plaines, Ill: Carbon and Low Alloy Research Committee, Steel Founders' Society of America, 1990.
Znajdź pełny tekst źródłaWanstall, Christopher R. Clean cast steel technology. [Des Plaines, IL]: Technical Steering Committee, Steel Founders' Society of America, 1994.
Znajdź pełny tekst źródłaA, Griffin John. Ladle treating, pouring, and gating for the production of clean steel castings. [Des Plaines, Ill.]: Technical Steering Committee, Steel Founders' Society of America, 1991.
Znajdź pełny tekst źródłaRamaswamy, Viswanathan, i ASM International Energy Division, red. Clean steels technology: Proceedings of the Robert I. Jaffee Memorial Symposium on Clean Materials Technology, ASM/TMS materials week, 2-5 November 1992, Chicago, Illinois, USA. [Palo Alto, Calif.]: Electric Power Research Institute, 1992.
Znajdź pełny tekst źródłaGubenko, Svetlana Ivanovna. Transformat͡s︡ii͡a︡ nemetallicheskikh vkli͡u︡cheniĭ v stali. Moskva: "Metallurgii͡a︡", 1991.
Znajdź pełny tekst źródłaY, Sahai. Tundish technology for clean steel production. Hackensack, NJ: World Scientific, 2008.
Znajdź pełny tekst źródłaCzęści książek na temat "Steel – Inclusions"
Ototani, Tohei. "Influence of Calcium on Nonmetallic Inclusions in Steels". W Calcium Clean Steel, 62–77. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-82752-5_5.
Pełny tekst źródłaLi, Ming, Biao Tao, Huajie Wu i Yanhui Sun. "Effect of ZrO2 Filters on Inclusions in Steel". W The Minerals, Metals & Materials Series, 155–64. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65253-1_13.
Pełny tekst źródłaIslam, Showmic, Satyajeet P. Deshpande, Luz D. Sotelo, Musa Norouzian, Michael T. Lumpkin, Liesl F. Ammerlaan, Allen J. Fuller i Joseph A. Turner. "Quantitative Ultrasonic Characterization of Subsurface Inclusions in Tapered Roller Bearings". W Bearing Steel Technologies: 12th Volume, Progress in Bearing Steel Metallurgical Testing and Quality Assurance, 66–81. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2020. http://dx.doi.org/10.1520/stp162320190081.
Pełny tekst źródłaGlaws, Peter C., i Michael E. Burnett. "The Effect of Nonmetallic Inclusions on Bending Fatigue Performance in High-Strength Steels". W Bearing Steel Technologies: 11th Volume, Advances in Steel Technologies for Rolling Bearings, 502–18. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2017. http://dx.doi.org/10.1520/stp160020170011.
Pełny tekst źródłaSuarez, Aldara Naveira. "Characterization of Non-Metallic Inclusions in Bearing Steels by Means of Focused Ion Beam". W Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings, 1–21. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2014. http://dx.doi.org/10.1520/stp158020140082.
Pełny tekst źródłaShimamoto, Masaki, Tomoko Sugimura, Sei Kimura, Akihiro Owaki, Masaki Kaizuka i Yosuke Shindo. "Improvement of the Rolling Contact Fatigue Resistance in Bearing Steels by Adjusting the Composition of Oxide Inclusions". W Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings, 1–13. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2014. http://dx.doi.org/10.1520/stp158020140043.
Pełny tekst źródłaLiu, Hui, Yikui Xie, Qiankun Yang, Qi Zhou i Jie Ma. "Modification of Inclusions by Adding Mg to 16MnCrS5 Gear Steel". W 11th International Symposium on High-Temperature Metallurgical Processing, 595–604. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36540-0_53.
Pełny tekst źródłaZhou, Qinghai, Jiongming Zhang i Yanbin Yin. "Analysis of Large Inclusions in Crankshaft Steel by Ingot Casting". W Materials Processing Fundamentals 2019, 107–16. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05728-2_10.
Pełny tekst źródłaZhu, Mingmei, Fei Xiong, Guanghua Wen, Shengjian Cao i Jian Li. "Inclusions Removal by Gas Bubbles in Steel Continuous Casting Tundish". W Characterization of Minerals, Metals, and Materials 2013, 37–43. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118659045.ch5.
Pełny tekst źródłaRajendran, Mohan Kumar, Michael Budnitzki i Meinhard Kuna. "Multi-scale Modeling of Partially Stabilized Zirconia with Applications to TRIP-Matrix Composites". W Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites, 679–721. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-42603-3_21.
Pełny tekst źródłaStreszczenia konferencji na temat "Steel – Inclusions"
Wang, Y., L. Zhang, W. Yang, Q. Ren, D. Pan, X. Wang i L. Sun. "Modification of Oxide Inclusions in Q345D Steel". W MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017/mst_2017_676_681.
Pełny tekst źródłaWang, Y., L. Zhang, W. Yang, Q. Ren, D. Pan, X. Wang i L. Sun. "Modification of Oxide Inclusions in Q345D Steel". W MS&T17. MS&T17, 2017. http://dx.doi.org/10.7449/2017mst/2017/mst_2017_676_681.
Pełny tekst źródłaWang, Chia-Sui, Wesley Huang, Mark Yeh i Jou-Wei Lin. "A Digital Evaluation System for Inclusions in Steel". W 2018 IEEE International Conference on Advanced Manufacturing (ICAM). IEEE, 2018. http://dx.doi.org/10.1109/amcon.2018.8615078.
Pełny tekst źródłaDedmon, Steven, i James M. Pilch. "The Development of Residual Micro-Stresses Surrounding Various Inclusion Types in Wheel Steel". W ASME 2009 Rail Transportation Division Fall Technical Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/rtdf2009-18009.
Pełny tekst źródłaZhang, X., X. Luo, L. Zhang, F. Chai i C. Yang. "Detection of Inclusions in Steel by Electrochemical Corrosion Methods". W MS&T18. MS&T18, 2018. http://dx.doi.org/10.7449/2018mst/2018/mst_2018_1271_1290.
Pełny tekst źródłaLi, W., Y. Ren, J. Wang i L. Zhang. "Evolution of Inclusions in Solid Steel during Reheating Process". W MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019mst/2019/mst_2019_1440_1445.
Pełny tekst źródłaLi, W., Y. Ren, J. Wang i L. Zhang. "Evolution of Inclusions in Solid Steel during Reheating Process". W MS&T19. TMS, 2019. http://dx.doi.org/10.7449/2019/mst_2019_1440_1445.
Pełny tekst źródłaZhang, X., X. Luo, L. Zhang, F. Chai i C. Yang. "Detection of Inclusions in Steel by Electrochemical Corrosion Methods". W MS&T18. MS&T18, 2018. http://dx.doi.org/10.7449/2018/mst_2018_1271_1290.
Pełny tekst źródłaHu, Ping, Joseph A. Turner, Constantine Tarawneh, Brent Wilson i Allen J. Fuller. "Multiple Frequency Ultrasonic Detection of Subsurface Near-Race Inclusions for Improved Fatigue Life Performance". W 2015 Joint Rail Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/jrc2015-5785.
Pełny tekst źródłaLi, Yan-hua, Hai-tao Wang, Ling-kang Ji, Qiang Chi i Hong-yuan Chen. "Evaluation Method of Large Inclusions in High-Grade Pipeline Steel". W ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/omae2013-11588.
Pełny tekst źródłaRaporty organizacyjne na temat "Steel – Inclusions"
Dr Alan Cramb, Sridar. Inclusion Optimization for Next Generation Steel Products. Office of Scientific and Technical Information (OSTI), kwiecień 2006. http://dx.doi.org/10.2172/878645.
Pełny tekst źródłaBabu, S. S., S. A. David i T. DebRoy. Inclusion formation in low-alloy steel welds. Office of Scientific and Technical Information (OSTI), listopad 1998. http://dx.doi.org/10.2172/290931.
Pełny tekst źródłaR. C. Bradt i M.A.R. Sharif. Enhanced Inclusion Removal from Steel in the Tundish. Office of Scientific and Technical Information (OSTI), wrzesień 2009. http://dx.doi.org/10.2172/993814.
Pełny tekst źródłaHicho, George E. Crack arrest fracture toughness measurements of normalized and inclusion shape controlled AAR TC128 grade B steel, and micro-alloyed, control-rolled, and inclusion shape controlled A 8XX grade B steel. Gaithersburg, MD: National Institute of Standards and Technology, 1991. http://dx.doi.org/10.6028/nist.ir.4501.
Pełny tekst źródłaStokes, Rebecca S., Daniel D. Loy i Stephanie L. Hansen. Effects of Increased Inclusion of Algae Meal on Finishing Steer Performance and Carcass Characteristics. Ames (Iowa): Iowa State University, styczeń 2016. http://dx.doi.org/10.31274/ans_air-180814-422.
Pełny tekst źródłaMessner, Mark C., Sam Sham i Yanli Wang. FY17 Status Report on Testing Supporting the Inclusion of Grade 91 Steel as an Acceptable Material for Application of the EPP Methodology. Office of Scientific and Technical Information (OSTI), sierpień 2017. http://dx.doi.org/10.2172/1394364.
Pełny tekst źródłaHariharan, Vasudevan, i Carl, D. Lundin. Final Report, Volume 5, Data Package for ASTM A923 Supporting Inclusion of A890-5A Super Duplex Stainless Steel ( Cast Equivalent of 2507). Office of Scientific and Technical Information (OSTI), wrzesień 2005. http://dx.doi.org/10.2172/861371.
Pełny tekst źródłaHariharan, Vasudevan, i Carl, W. Lundin. Final Report, Volume 5, Data Package for ASTM A923 Supporting Inclusion of A890-5 Super Duplex Stainless Steel (Cast Equivalent of 2507). Office of Scientific and Technical Information (OSTI), wrzesień 2005. http://dx.doi.org/10.2172/861934.
Pełny tekst źródłaAsaoka, Junya, Takahiro Shinoda, Katsumi Mori, Takashi Kano i Kenichiro Kimura. Development of New Alloy Steel and Its Application for Both High Fatigue Strength and High Machinability by Utilizing New Inclusion Morphology Control Technology. Warrendale, PA: SAE International, maj 2005. http://dx.doi.org/10.4271/2005-08-0094.
Pełny tekst źródłaLundy, Erika L., Beth E. Doran, Evan Vermeer, Daniel D. Loy i Stephanie L. Hansen. Influence of Corn Particle Size on Steer Performance and Carcass Characteristics When Fed Diets with Moderate Inclusions of Wet Distillers Grains plus Solubles. Ames (Iowa): Iowa State University, styczeń 2015. http://dx.doi.org/10.31274/ans_air-180814-1281.
Pełny tekst źródła