Rozprawy doktorskie na temat „Solar energy”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Solar energy”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Золотова, Світлана Григорівна, Светлана Григорьевна Золотова, Svitlana Hryhorivna Zolotova i T. V. Konoplenko. "Energy producing: solar energy". Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/13440.
Pełny tekst źródłaBafana, Ramzi, i Zain Zulfiqar. "Solar Energy". Thesis, Blekinge Tekniska Högskola, Institutionen för tillämpad signalbehandling, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2079.
Pełny tekst źródłaRamzi: +46723231353, +966561993488 Zain:
Yeremenko, А. "Solar energy is an energy alternative source". Thesis, Sumy State University, 2017. http://essuir.sumdu.edu.ua/handle/123456789/62568.
Pełny tekst źródłaMaples, David William. "The Solar Energy Tracker". Thesis, University of Canterbury. Electrical and Computer Engineering, 2008. http://hdl.handle.net/10092/4420.
Pełny tekst źródłaParand, Foroutan. "Solar energy utilisation and evacuated tubular solar collectors". Thesis, Brunel University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.292989.
Pełny tekst źródłaBortolini, Marco. "Design, control and management of renewable energy plants and technologies". Doctoral thesis, Università degli studi di Padova, 2013. http://hdl.handle.net/11577/3422587.
Pełny tekst źródłaOggigiorno, ed in misura crescente nei prossimi decenni, la disponibilità e facilità di accesso alle fonti energetiche rappresenta un fattore determinante per lo sviluppo mondiale ed il progresso di popoli e nazioni. Parallelamente a ciò, il progressivo sfruttamento delle risorse naturali, unito all’aumento dell’impatto delle attività antropiche sull’ecosistema terrestre e sul clima, impongono a comunità ed istituzioni, ad ogni livello, un ripensamento e l’attuazione di differenti strategie per garantire lo sviluppo sociale ed economico attraverso il ricorso ad approcci basati sul concetto di sviluppo sostenibile. In questo contesto, le fonti energetiche rinnovabili, i.e. solare, eolica, idroelettrica, da biomasse, geotermica, ecc., assumono certamente un ruolo determinante per coniugare progresso ed attenzione alle tematiche ambientali. La presente Tesi di Dottorato si incentra su queste tematiche approfondendo strategie, metodi ed approcci innovativi per l’efficace progettazione, controllo e gestione di impianti e tecnologie per le energie rinnovabili. Nel dettaglio, lo scenario d’insieme delle fonti energetiche è analizzato con logica di sistema ed orientamento all’ottimizzazione globale proponendo studi e modelli che evidenzino l’importanza ed il potenziale delle principali risorse, rinnovabili e non, come elementi di un grande mosaico, i.e. il mix energetico globale, nel quale le potenzialità economiche ed ambientali di ogni risorsa sono enfatizzate minimizzando, nel contempo, gli impatti negativi e le rispettive debolezze. Tra le possibili fonti rinnovabili, la fonte solare assume primaria importanza per disponibilità, diffusione ed impatto potenziale. La presente Tesi di Dottorato analizza, in dettaglio, questa risorsa energetica presentando modelli, metodi ed impianti sviluppati per accrescere l’incidenza di questa risorsa nel mix energetico. Gli elementi ed aspetti fondamentali, insieme ad approcci innovativi per la stima delle componenti della radiazione solare, sono presentati nell’elaborato. Successivamente, l’innovativo settore della concentrazione solare è analizzato, in dettaglio, anche attraverso l’illustrazione delle scelte progettuali, lo sviluppo e la campagna sperimentale preliminare di un concentratore solare fotovoltaico/termico (PV/T) a lenti di Fresnel ed inseguimento biassiale. Nel seguito, vengono approfondite possibili strategie per l’inseguimento biassiale ed algoritmi di controllo, implementati in una piattaforma semi-automatizzata sviluppata in ambiente di programmazione grafica LabViewTM. L’ultima sezione propone, infine, un approccio per la progettazione di un simulatore solare, un dispositivo spesso adottato nei test di ottica solare. In conclusione, la presente Tesi di Dottorato, descrive una molteplicità di strategie orientate alla diffusione delle energie rinnovabili, con attenzione alle performance ed all’impatto potenziale che esse hanno verso il raggiungimento dell’obiettivo ambizioso di un sostenibile living planet.
Varella, Fabiana Karla de Oliveira Martins. "Estimativa do indice de nacionalização dos sistemas fotovoltaicos no Brasil". [s.n.], 2009. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263003.
Pełny tekst źródłaTese (doutorado) -Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica
Made available in DSpace on 2018-08-12T18:30:16Z (GMT). No. of bitstreams: 1 Varella_FabianaKarladeOliveiraMartins_D.pdf: 2814812 bytes, checksum: 2b3d8b0306df42b90c009281f0150f0d (MD5) Previous issue date: 2009
Resumo: A Lei nº 10.438/02 estabeleceu o Programa de Incentivo às Fontes Alternativas de Energia Elétrica - PROINFA, único programa nacional a estimular as fontes renováveis alternativas, com o intuito de aumentar a participação da energia elétrica produzida por empreendimentos a partir das fontes eólica, pequenas centrais hidrelétricas - PCHs e biomassa no sistema interligado nacional. Posteriormente, o PROINFA foi revisado pela Lei nº 10.762/03 e alterou em sua regulamentação a obrigatoriedade de um índice mínimo de nacionalização de serviços e equipamentos, que em sua primeira etapa passou a corresponder a 60% do custo total da construção dos projetos contemplados. A energia solar fotovoltaica não foi contemplada pelo Programa, e o objetivo desta tese é estimar o índice de nacionalização para cada um dos três sistemas fotovoltaicos selecionados para estudo (sistema de bombeamento de água, sistema de eletrificação rural e sistema conectado à rede elétrica). Para elaboração desse cálculo foi efetuada uma adaptação da metodologia utilizada pelo PROINFA e considerados somente os custos dos principais equipamentos e não dos serviços. Os resultados obtidos permitiram concluir que os sistemas de bombeamento de água e de eletrificação rural são sistemas que 5% e 35%, respectivamente, dos seus equipamentos já são disponibilizados pela indústria nacional. mesmo não ocorre com os sistemas fotovoltaicos conectados à rede elétrica, que atualmente tem 100% dos seus principais equipamentos importados
Abstract: The Law nº 10.438/02 established the Program of Incentives for Alternative Electric Power Sources - PROINFA, which is the only national program aimed to foster alternative renewable energy sources and to increase the share of electric energy production from enterprises based on wind power, small hydropower plants and biomass in the interconnected national power grid. PROINFA was later modified by the Law nº 10.762/03 which revised the regulation imposing a minimum nationalization index of services and equipment that in its first stage corresponded to 60% of the total cost of the selected projects. Solar photovoltaic power was not included in PROINFA and because of that the objective of this thesis is to estimate the nationalization index of each of the following photovoltaic systems selected for the study: water pumping PV system, rural electrification PV system and grid-connected PV system. In order to carry out the calculations, the methodology used at PROINFA was adapted and only the costs of the key equipment, not the services, were considered. The results led to the conclusion that the water pumping and the rural electrification systems are those in which 5% and 35%, respectively, equipment is already made available by the national industry. The same is not verified for the grid-connected PV systems in which 100% of the key equipment is imported
Doutorado
Doutor em Planejamento de Sistemas Energéticos
Mattos, Sérgio Ricardo de [UNESP]. "Análise do rendimento térmico do aquecedor solar parabólico cilíndrico". Universidade Estadual Paulista (UNESP), 2011. http://hdl.handle.net/11449/99302.
Pełny tekst źródłaCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Este aquecedor solar foi construído em uma estrutura metálica, que tem um revestimento de polietileno reflexivo parabólico cilíndrico, onde no foco da parábola passa uma serpentina com sete tubos em cobre de 9,5 mm e o projeto foi desenvolvido para obter temperaturas mais elevadas do que os aquecedores planos. O objetivo desta dissertação foi atingir temperaturas mais altas na fase líquida. As temperaturas alcançadas foram obtidas utilizando uma densidade de potência solar que variou entre (1.000±10) W/m2, nas vazões de: 66, 54, 42, 30, 27, 24, 21, 18, 15, 12 e 9 litros por hora. A máxima temperatura atingida utilizando-se a vazão de nove litros por hora foi de 71°C, permitindo uma diferença de temperatura, em relação a temperatura ambiente de 43°C. A máxima vazão utilizada no aquecedor solar parabólico cilíndrico foi de 66 litros por hora e obteve-se uma temperatura de 38°C, sendo a diferença em relação à temperatura ambiente de 6°C. Assim com o desenvolvimento do aquecedor solar parabólico cilíndrico obtiveram-se temperaturas maiores em uma área de captação menor, do que em aquecedor convencionais planos e com rendimentos superiores a 70% em sua maior faixa de operação
This solar heater is constructed of a metallic structure, which has a polyethylene coating reflective parabolic cylindrical, where the focus of the parable is a serpentine seven copper pipes of 9.5 mm and the project was designed to obtain higher temperatures than the heaters plans and the objective of this thesis was to reach higher temperatures in the liquid phase. The temperatures reached were obtained using a solar power density ranged from (1000±10) W/m2, the flow rates: 66, 54, 42, 30, 27, 24, 21, 18, 15, 12 and 9 liters per hour. The maximum temperature reached by using the flow of nine liters per hour was 71°C, allowing a temperature difference in relation to ambient temperature of 43°C. The maximum flow rate used in the cylindrical parabolic solar heater was 66 liters per hour and obtained a temperature of 38°C, and the difference in the ambient temperature of 6°C. So with the development of a cylindrical parabolic solar heater temperatures were obtained in a larger area smaller than in conventional heating plans and with performance up to 70% on the higher range of operation
Yang, Sun. "Solar Energy Control System Design". Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-141489.
Pełny tekst źródłaHofker, Gerrit. "Desiccant cooling with solar energy". Thesis, De Montfort University, 2001. http://hdl.handle.net/2086/4274.
Pełny tekst źródłaVan, Zyl GHC. "Solar energy for domestic use". Thesis, Cape Technikon, 2000. http://hdl.handle.net/20.500.11838/884.
Pełny tekst źródłaThe demand for pool heating has increased dramatically over the last few years. This is ascribed to the idea that a swimming pool is expensive and can only be used for four months of the year. Therefore, a need for a relatively inexpensive solar heating system, capable of heating pool water to comfortable temperatures for an extended period, does exist. The least expensive solar heating system for swimming pool heating on the market in South Africa is in the order of R 11000. This is a fixed system, usually mounted on the roof of a house. In order to ensure the safety of minors, a safety net or sail must be installed. This is an additional cost, which approximates R1500, yielding a total cost for safety and heating in the order of R 12500. Copper pipes packed in black material are utilised in these conventional heating systems, and it is the cost of this good heat conductor that makes these units expensive. In this study an alternative pool heating system constructed of PVC was investigated. The system is designed to be flexible, mobile, act as a safety mechanism and absorbs the maximum amount of solar energy available. Dark blue material as opposed to black PVC was selected for aesthetic reasons at the expense of maximum efficiency. The material strength was tested as well as the strength of adhesion. The influence of factors such as exposure to the sun and the effect of water containing chlorine and acid on the material were evaluated. Also, various means of channelling the water through the system for increased efficiency was investigated. A pilot model was constructed and its performance evaluated. It has been concluded that the alternative approach provides effective heating at a lower cost than current systems. Also, the durability of the design was found to be acceptable.
Іщенко, Наталія Володимирівна, Наталия Владимировна Ищенко i Nataliia Volodymyrivna Ishchenko. "Solar energy in sustainable future". Thesis, Вид-во СумДУ, 2007. http://essuir.sumdu.edu.ua/handle/123456789/17432.
Pełny tekst źródłaSabaawi, Ahmed Mohammed Ahmed. "Nanoantennas for solar energy harvesting". Thesis, University of Newcastle upon Tyne, 2015. http://hdl.handle.net/10443/2921.
Pełny tekst źródłaGriffitts, Fletcher G. "Fullerenes in Solar Energy Cells". Digital Commons @ East Tennessee State University, 2017. https://dc.etsu.edu/honors/394.
Pełny tekst źródłaOrtíz, Elvis Richard Tello. "Sistemas fotovoltaicos e eólicos: metodologia para análise da complementaridade espacial-temporal com aplicação no dimensionamento e análise de risco financeiro". Universidade de São Paulo, 2014. http://www.teses.usp.br/teses/disponiveis/3/3143/tde-29122014-175607/.
Pełny tekst źródłaThis thesis proposes to characterize the spatial-temporal complementarity between wind and solar photovoltaic energy between regions of Brazil and study, in the marketing of electricity in the Brazilian Electrical Sector - SEB, a portfolio formed by these sources bring significant economic benefits to the investor. To meet these goals, methods for data processing were studied as correction of solar irradiance calculation of the energy generated by the sources studied, the environment of contracting electricity in Brazil, optimization methods and models for risk analysis for contracting energy in the free energy market. The proposed methodology to answer the questions was applied in a case study involving three Brazilian regions with a horizon of ten years time series. It was concluded that there is complementarity between energy sources in the different regions studied and in different time periods. It was confirmed that technically can reduce the fluctuation in power generation by analyzing the complement of sources, however, the installation cost of photovoltaic power is still too high, preventing yet large-scale investments and complementary way the source wind. Also it was found within the sites evaluated, only one of the three sites presented economic and financial benefit by the portfolio of wind and solar sources acting in the sale of energy market and considering the risk criteria limit established when evaluated according to perspective of maximizing revenue in the free energy market.
Santos, Romi Stella dos [UNESP]. "Conservação de energia: uma ferramenta para analisar o aproveitamento de energia solar em instalações residenciais". Universidade Estadual Paulista (UNESP), 2008. http://hdl.handle.net/11449/99283.
Pełny tekst źródłaConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
No Brasil, devido ao forte crescimento da demanda de energia elétrica nas últimas décadas e com a necessidade de atender a esta procura, torna-se indispensável a inclusão no sistema elétrico brasileiro de programas de eficiência energética e a utilização de fontes alternativas de energia, pois com a construção de novas hidrelétricas e termoelétricas para atender o consumidor, ocorre inundações de grandes áreas e diminuição da emissão de gases para a atmosfera, o que causa fortes impactos ambientais. O uso de fontes alternativas também diminui a dependência do Brasil de combustíveis fósseis, pois futuramente ocorrerá o esgotamento de reservas naturais no país, tendo a necessidade de importar energia, o que elevará os preços das tarifas de energia elétrica. Para que haja a conservação de energia proveniente de fontes tradicionais e incentivar a implantação de energia solar no sistema elétrico brasileiro, desenvolveu-se um programa que analisa a viabilidade técnico-econômica de inclusão do sistema fotovoltaico e fototérmico ao sistema tradicional de distribuição de energia nas diversas regiões do Brasil em residências, pois é o setor que possui um maior potencial de economia de energia. O programa é uma ferramenta de fácil manuseio, de acesso rápido que permitem tomadas de decisões rápidas e seguras quanto à implantação de energia solar por parte do consumidor, além de fornecer em qual região é mais viável essa implantação.
In Brazil, due to a solid increasing in electrical energy demand at the last decades and due to the need to comply with this demand, became essential the inclusion of energetic efficiency programs and use of alternative energy resources in the Brazilian electrical supply system. However, the new hydro and thermo electrical power plants construction to attend the consumer cause strong environmental impacts, since they need big flooded lakes and eliminate theirs pollutants in the atmosphere, respectively. Moreover, the use of alternative energy resources decreases Brazil dependency of fossil fuels, besides it prevents the breakdown of the natural reserves and the need of energy importation, what would increase the charge for the electrical energy. To the energy conservation provided by traditional resources and to encourage the implementation of a solar energy based system in Brazil, it was developed a software that analyzes technical and economic feasibility of the photovoltaic and photothermical systems introduction in the traditional supply system on the several regions of Brazil to residential use, because this is a sector that has an elevated potential of energy saving. The software has a friendly interface, with quick access that allows the user to take quick and safe decisions, regarding to the solar energy implementation by consumers, and evaluate which area of the country is the most interesting to the implementation.
Freitas, Flavio Santos 1982. "Eletrodos de materiais inorgânicos modificados para células solares híbridas". [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/248430.
Pełny tekst źródłaTese (doutorado) - Universidade Estadual de Campinas, Instituto de Química
Made available in DSpace on 2018-08-23T23:53:53Z (GMT). No. of bitstreams: 1 Freitas_FlavioSantos_D.pdf: 16885434 bytes, checksum: 48b960051e69118d4e3bbf7bc096a552 (MD5) Previous issue date: 2013
Resumo: Este trabalho apresenta a síntese de moléculas carboxiladas e sua utilização como agentes compatibilizantes em sistemas híbridos inorgânico/orgânico. A caracterização e aplicação das interfaces destes sistemas híbridos de dióxido de titânio com poli(3-hexiltiofeno) (TiO2/P3HT) e silício monocristalino com poli(3-hexiltiofeno) (Si/P3HT) também foram estudadas. No primeiro sistema, TiO2/P3HT, a modificação superficial do TiO2 foi efetuada com três moléculas carboxiladas: ácido 2-tiofenocarboxílico (TCA), ácido 2-tiofenoacético (TAA) e ácido 2,4-tiofenodicarboxílico (TDA). Essas modificações demostraram que a molécula TAA apresenta melhor compatibilidade na interface, evidenciada por estudos fotofísicos de Espectroscopia de Absorção Transiente (TAS) e medidas de ângulo de contato. A célula solar com TAA (configuração invertida) apresentou eficiência de 0,03%, três vezes maior que a obtida no dispositivo padrão. Com a inserção do corante N719 na superfície do TiO2, a eficiência alcançou valores superiores a 1%. A eficiência dos dispositivos chegou a 1,35% com a inserção na camada de P3HT de nanopartículas de TiO2 na forma de bastão (TiO2 NB/TAA). Essa modificação da camada polimérica mostrou que o TiO2 NB/TAA apresentou propriedades ligeiramente superiores nos experimentos de fotoeletroquímica quando comparado com nanopartículas sintetizadas no formato esférico (TiO2 NE). Além disso, a técnica de Espalhamento de Raios-X a Baixo Ângulo (SAXS) mostrou que as nanopartículas TiO2 NB/TAA e TiO2 NE encontram-se distribuídas de forma homogênea pela matriz de P3HT. No segundo sistema, as células solares de Si/P3HT foram obtidas a partir de reações que modificaram a interface dos materiais. A adsorção química da molécula TAA sobre o óxido nativo (Si/SiOx/TAA) e a reação do grupo superficial Si-Cl com o reagente de Grignard brometo de tiofeno-magnésio (Si/Tiofeno) foram respectivamente caracterizadas por Espectroscopia de Infravermelho (FTIR) e Espectroscopia de Fotoelétrons por Raios-X (XPS). A contribuição do P3HT para o dispositivo foi avaliada a partir da comparação com uma junção Schottky (Al/Si/Au). Os valores de VOC obtidos nas células solares na presença de P3HT foram similares (~0,4 V) e superiores ao obtido no dispositivo sem o polímero (~0,2 V), evidenciando o domínio da junção Si/P3HT para as propriedades fotovoltaicas. O dispositivo Si/SiOx/TAA apresentou grande resistência em série, com eficiência de conversão de energia inferior a 0,5%. Porém, com a configuração Al/Si/Tiofeno/P3HT/Au, as células solares alcançaram valores de eficiência de 5,76%. A eficiência superior foi relacionada com a melhor adesão e compatibilidade entre o Si e o P3HT a partir de imagens de SEM
Abstract: This work presents the synthesis of carboxylated molecules and their use as compatibilizer agents in hybrid inorganic/organic systems. Characterization and application of the interfaces of those hybrid systems comprising titanium dioxide with poly(3-hexylthiophene) (TiO2/P3HT) and monocrystalline silicon with poly(3-hexylthiophene) (Si/P3HT) will also be described. In the former system, TiO2/P3HT, the TiO2 surface was modified with three molecules: 2-thiophenecarboxylic acid (TCA), 2-thiopheneacetic acid (TAA) and 2,4- thiophenedicarboxylic acid (TDA). Transient Absorption Spectroscopy (TAS) photophysical studies and contact angle measurements demonstrated that TAA presents the best compatibility in the interface. Solar cells modified with TAA, set up in inverted configuration, showed 0.03% of overall energy conversion efficiency, which is three times larger than the one obtained from a standard device. Replacing TAA by N719 dye on TiO2 surface increased the efficiency, achieving values higher than 1%. Inserting TiO2 rod-shaped nanoparticles (TiO2 NB/TAA) on P3HT layer of the latter system resulted in 1.35% overall efficiency. Photoelectrochemical experiments demonstrated that this modification using TiO2 NB/TAA increases exciton separation rate and conductivity properties slightly enhanced compared to spherical nanoparticles (TiO2 NE/TAA). Small-Angle X-ray Scattering (SAXS) showed that TiO2 NB/TAA and TiO2 NE nanoparticles are homogeneously distributed in the P3HT matrix. In the Si/P3HT hybrid system, the inorganic/organic interface was modified through chemical adsorption of TAA molecules on the native oxide (Si/SiOx/TAA) and a reaction of the surface Si-Cl groups with Grignard reagent 2-thiophene-magnesium bromide (Si/Tiofeno). Both reactions were characterized using Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS). The contribution of P3HT to the p-n junction formation in the photovoltaic device was evaluated from a comparison with a Schottky junction (Al/Si/Au). The VOC values obtained with P3HT were similar among the experiments (around 0.4 V) and higher than without the polymer (around 0.2 V). This observation highlights the dominance of Si/P3HT for photovoltaic properties. The Si/SiOx/TAA device exhibited a high series resistance, with energy conversion efficiency lower than 0.5%. However, using Al/Si/Tiofeno/P3HT/Au configuration, the solar cells reached 5.76% efficiency. The higher values might be related to a better adhesion and compatibility between Si and P3HT, which was observed from SEM images
Doutorado
Quimica Inorganica
Doutor em Ciências
Sholin, Veronica. "Luminescent solar concentrators and all-inorganic nanoparticle solar cells for solar energy harvesting /". Diss., Digital Dissertations Database. Restricted to UC campuses, 2008. http://uclibs.org/PID/11984.
Pełny tekst źródłaMahoney, Luther. "Solar hydrogen and solar electricity using mesoporous materials". Thesis, University of South Dakota, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=3723927.
Pełny tekst źródłaThe development of cost-effective materials for effective utilization of solar energy is a major challenge for solving the energy problems that face the world. This thesis work relates to the development of mesoporous materials for solar energy applications in the areas of photocatalytic water splitting and the generation of electricity. Mesoporous materials were employed throughout the studies because of their favorable physico-chemical properties such as high surface areas and large porosities. The first project was related to the use of a cubic periodic mesoporous material, MCM-48. The studies showed that chromium loading directly affected the phase of mesoporous silica formed. Furthermore, within the cubic MCM-48 structure, the loading of polychromate species determined the concentration of solar hydrogen produced. In an effort to determine the potential of mesoporous materials, titanium dioxide was prepared using the Evaporation-Induced Self-Assembly (EISA) synthetic method. The aging period directly determined the amount of various phases of titanium dioxide. This method was extended for the preparation of cobalt doped titanium dioxide for solar simulated hydrogen evolution. In another study, metal doped systems were synthesized using the EISA procedure and rhodamine B (RhB) dye sensitized and metal doped titania mesoporous materials were evaluated for visible light hydrogen evolution. The final study employed various mesoporous titanium dioxide materials for N719 dye sensitized solar cell (DSSC) materials for photovoltaic applications. The materials were extensively characterized using powder X-ray diffraction (XRD), nitrogen physisorption, diffuse reflectance spectroscopy (DRS), UV-Vis spectroscopy, Fourier-Transform-Infrared Spectroscopy (FT-IR), Raman spectroscopy, chemisorption, photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). In addition, photoelectrochemical measurements were completed using current-voltage (I-V) curves, external quantum efficiency (EQE) curves, electrochemical impedance spectroscopy (EIS), and transient spectroscopy. The thesis work presented provides a better understanding of the role of mesoporous materials for solar hydrogen and solar electricity production.
Mattos, Sérgio Ricardo de. "Análise do rendimento térmico do aquecedor solar parabólico cilíndrico /". Guaratinguetá : [s.n.], 2011. http://hdl.handle.net/11449/99302.
Pełny tekst źródłaBanca: Osiris Canciglieri Junior
Banca: Rubens Alves Dias
Resumo: Este aquecedor solar foi construído em uma estrutura metálica, que tem um revestimento de polietileno reflexivo parabólico cilíndrico, onde no foco da parábola passa uma serpentina com sete tubos em cobre de 9,5 mm e o projeto foi desenvolvido para obter temperaturas mais elevadas do que os aquecedores planos. O objetivo desta dissertação foi atingir temperaturas mais altas na fase líquida. As temperaturas alcançadas foram obtidas utilizando uma densidade de potência solar que variou entre (1.000±10) W/m2, nas vazões de: 66, 54, 42, 30, 27, 24, 21, 18, 15, 12 e 9 litros por hora. A máxima temperatura atingida utilizando-se a vazão de nove litros por hora foi de 71°C, permitindo uma diferença de temperatura, em relação a temperatura ambiente de 43°C. A máxima vazão utilizada no aquecedor solar parabólico cilíndrico foi de 66 litros por hora e obteve-se uma temperatura de 38°C, sendo a diferença em relação à temperatura ambiente de 6°C. Assim com o desenvolvimento do aquecedor solar parabólico cilíndrico obtiveram-se temperaturas maiores em uma área de captação menor, do que em aquecedor convencionais planos e com rendimentos superiores a 70% em sua maior faixa de operação
Abstract: This solar heater is constructed of a metallic structure, which has a polyethylene coating reflective parabolic cylindrical, where the focus of the parable is a serpentine seven copper pipes of 9.5 mm and the project was designed to obtain higher temperatures than the heaters plans and the objective of this thesis was to reach higher temperatures in the liquid phase. The temperatures reached were obtained using a solar power density ranged from (1000±10) W/m2, the flow rates: 66, 54, 42, 30, 27, 24, 21, 18, 15, 12 and 9 liters per hour. The maximum temperature reached by using the flow of nine liters per hour was 71°C, allowing a temperature difference in relation to ambient temperature of 43°C. The maximum flow rate used in the cylindrical parabolic solar heater was 66 liters per hour and obtained a temperature of 38°C, and the difference in the ambient temperature of 6°C. So with the development of a cylindrical parabolic solar heater temperatures were obtained in a larger area smaller than in conventional heating plans and with performance up to 70% on the higher range of operation
Mestre
Wigginton, James Michael. "Optical analysis of cavity solar energy receivers". Thesis, Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/17348.
Pełny tekst źródłaCanto, Mario Afonso Ribeiro do [UNESP]. "Projeto e desenvolvimento de um sistema automatizado para monitoramento de fontes alternativas de energia". Universidade Estadual Paulista (UNESP), 2007. http://hdl.handle.net/11449/99291.
Pełny tekst źródłaCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
A utilização de fontes alternativas e renováveis de energia apresenta-se como um recurso energético com um mínimo de impacto ambiental. Com o crescimento do uso destes recursos, torna-se importante o conhecimento dos mesmos do comportamento em relação às condições ambientais naturais. As alterações das condições climáticas, por vezes, causam incertezas quanto ao rendimento dos sistemas alternativos e renováveis de geração de energia. Este trabalho apresenta-se como uma forma de conhecimento do comportamento das fontes de energia perante diversas condições do clima. Esta dissertação tem por objetivo contribuir com o conhecimento sobre o comportamento de fontes alternativas de energia comerciais e desenvolvidas no Centro de Energias Renováveis da UNESP de Guaratinguetá. Neste trabalho, foi desenvolvido um sistema de aquisição e tratamento de dados para monitorar o comportamento de fontes alternativas e renováveis de energia e das condições ambientais. Nesse sistema são especificados sensores para monitoramento das condições ambientais e para monitoramento dos dispositivos componentes das fontes de energia alternativa. O desenvolvimento de um software para coleta de dados e controle dos dispositivos de medição é parte integrante do trabalho para viabilizar o acesso às informações de forma a facilitar a análise de resultados. O protótipo construído durante o desenvolvimento da dissertação possibilitou o monitoramento das fontes de energia do laboratório como também das condições atmosféricas locais.
The renewable and alternative energy sources utilization presents-itself as an energy resource with a minimum environmental impact. With the growth of the use of these resources, becomes so important the knowledge of the performace regarding to the natural environmental conditions. The climatic conditions alterations, for times, cause users doubts of confidance of the renewable and alternative systems performance in energy generation. This work presents-itself as a form of knowledge of the performance of the energy sources to diversiity climate conditions. This dissertation has for objective contribute with the knowledge about the performance of commercial and alternative energy sources and developed in the Renewable Energies Center of the UNESP, Guaratinguetá. Was developed a system of data acquisition and analysis for monitoring renewable and alternative energy sources and environmental conditions. In this work, are determined and specified sensors for monitoring of the environmental conditions and for monitoring of the devices components of the alternative energy.sources The development of a data aquisition software and control of measurement is a part to make easy the access the information to facilitate the results analysis. The prototype built during the dissertation development enabled the energy sources monitoring of the center as also of the local atmospheric conditions.
Beck, Madeleine, i Johannes Verweyen. "Utilization of Solar Energy in Liljeholmskajen". Thesis, KTH, Energiteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-99036.
Pełny tekst źródłaFör att uppnå en hållbar samhällsutveckling är det i dagsläget mycket viktigt att försöka hitta en lösning på hur man ska minska beroendet av fossila bränslen. En av de stora energiförbrukarna i dagens samhälle är alla byggnader, vilket gör denna sektor till ett viktigt föremål för vidareutveckling. Denna rapport undersöker möjligheterna för en eventuell användning av solenergi i Liljeholmskajen, en stadsdel i södra Stockholm, genom att ta i beaktning både teknik, ekonomi och miljöaspekter.Rapporten analyserar olika teknologier för användning av solenergi, med tyngdpunkten på termiska solfångare samt tunnfilms- och monokristallina solceller. Analysen omfattar områden såsom verkningsgrad, livslängd och systemspecifika begränsningar. Vidare studeras även Liljeholmskajen och dess energibehov. Analysen baseras på tre olika byggnader som kan anses vara representativa för stadsdelen. Detta leder sedan till att det totala energibehovet i Liljeholmskajen som kan täckas med hjälp av respektive teknik, samt deras investeringskostnader kan beräknas.Utifrån de erhållna resultaten har en slutsats dragits, vilken påvisar hur man på bästa sätt skulle kunna använda sig av solenergi i Liljeholmskajen. I dagsläget vore en kombination av solfångare och tunnfilms celler att rekommendera, men det är även beroende av hur stor investering man kan göra.Om man i framtiden skulle omvandla bergrummen som finns i området till värmelager så skulle inte längre lagringsmöjligheterna vara en begränsande faktor för solfångarsystem. Detta skulle innebära att en ökad användning av solfångare vore att rekommendera.
Giddings, S. L. "Heterogeneous reactions in solar energy conversion". Thesis, Swansea University, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637056.
Pełny tekst źródłaBengtsson, Tobias, i Håkan Hult. "Combining Solar Energy and UPS Systems". Thesis, KTH, Tillämpad termodynamik och kylteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-148042.
Pełny tekst źródłaSolenergi och avbrottsfri kraftförsörjning (UPS) är två tekniker som växer snabbt. Efterfrågan på solenergi ökar huvudsakligen på grund av den snabba utvecklingen mot billigare solceller, vilket lett till att solenergi blivit lönsamt i en större mängd applikationer. I många områden är solenergi dock fortfarande inte kostnadsmässigt konkurrenskraftigt jämfört med traditionella energikällor, vilket gör en fortsatt sänkning av kostnaderna för solenergi till en viktig fråga för solenergiindustrin. Detta examensarbete har som syfte att undersöka om det är tekniskt möjligt att kombinera solenergi med UPS-system samt potentialen för ekonomiska synergier med denna kombination. Tidigare forskning inom området har endast undersökt denna kombination från en rent teknisk synvinkel. Detta examensarbete driver istället hypotesen att ett kombinerat solenergi- och UPS-system kan leda till större kostnadsbesparingar jämfört med ett traditionellt nätanslutet solenergisystem, även i ett stabilt elnät som i Sverige. En on-line UPS skyddar en känslig last genom att kontinuerligt likrikta och sedan åter växelrikta inkommande ström för att därmed både isolera lasten från nätet samt höja strömkvalitén. I UPS-systemet finns därmed en likströmsdel dit solpanelerna direkt kan kopplas istället för att skicka den genererade solenergin ut på elnätet. Därmed undviks inköp och installation av sol-växelriktare i solenergisystemet. Studien är uppdelad i tre delar. Första delen är en datorsimulering i MATLAB och syftar till att explorativt undersöka det kombinerade systemet för en optimerad design innan fysiska experiment utförs. Den andra delen av studien utgörs av experiment på ett fysiskt prototypsystem baserat på ett principiellt UPS- och solenergisystem. Den tredje delen av studien är en ekonomisk analys av både investeringskostnader och energibalanser som jämför ett kombinerat system (UPS & sol) med två separata system (UPS & sol separat). Resultaten från prototypsystemet visar att påkopplandet av solceller i en principiell UPS har mycket låg påverkan på UPS-systemets funktionalitet, samt att solcellerna som en extra energikälla under vissa driftförhållanden kan ha en positiv påverkan på UPS-systemet. För optimal prestanda kan dock en viss integration av systemen krävas. Resultatet från den ekonomiska analysen visar att ett kombinerat system har potential att sänka investeringskostnaden genom billigare komponenter. Ett kombinerat system kan även leda till en högre energibesparing jämfört med ett nätanslutet solenergisystem eftersom konverteringsförlusterna i UPS-systemet sjunker i det kombinerade systemet. Slutsatsen av studierna är att ett kombinerat solenergi- och UPS-system är tekniskt möjligt. Dessutom finns betydande ekonomiska synergier med ett kombinerat system. Detta innebär att ett kombinerat system kan vara lönsamt även i fall där ett separat solelsystem inte är det.
Hassan, Ibrahim. "Solar energy conversion by photoelectrochemical processes". Thesis, University of Bath, 2011. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.542078.
Pełny tekst źródłaLiang, Xusheng, Elvis Tanyi i Xin Zou. "Charging electric cars from solar energy". Thesis, Blekinge Tekniska Högskola, Institutionen för tillämpad signalbehandling, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-11919.
Pełny tekst źródłaFerrer, Martínez Claudia. "Machine Learning for Solar Energy Prediction". Thesis, Högskolan i Gävle, Avdelningen för elektronik, matematik och naturvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-27423.
Pełny tekst źródłaBokfors, Sofie. "Awareness on Solar Energy in Kenya". Thesis, KTH, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-245193.
Pełny tekst źródłaSolenergi i kombination med medvetenhet gällande energieffektivitet är ett viktigt steg för att uppnå det slutliga målet, som är att ha en hållbar utveckling gällande energi och miljö i Kenya. Tillsammans med en bra energipolitik som har tydliga regler, kan detta mål uppnås. Detta kommer att hjälpa konsumenterna att fatta mer rationella beslut när det gäller ny teknik. Ett nyckelproblem som identifieras i detta arbete är bristen på medvetenhet och även bristen av en strikt energipolitik. Kunskapen om solenergi och energieffektivitet har inte nått ut till majoriteten av människorna i Kenya. I dagsläget är lagarna gällande energi inte tillräckligt strikta. Denna rapport syftar till att förbättra den nuvarande situationen genom att föreslå strategier för att nå ut till maximalt antal invånare och utbilda dem om solenergialternativ. Rapporten syftar till att lägga en grund för att kunna bygga upp en plattform som skapar medvetenhet om solenergi och energieffektivitet, och vad som krävs politiskt och finansiellt för att stödja detta. För att kunna bygga upp denna plattform har analyser gjorts genom litteraturstudier och möten med intressenter som har bidragit med förstahandsinformation, detta för att kunna skapa grunden till den framtida plattformen. Informationen som samlats in har sedan använts för att förklara och för att försöka möta utmaningarna gällande solenergi i Kenya. Slutsatsen av detta projekt är att majoriteten invånarna i landet saknar nödvändig kunskap om solenergi. Det är därför viktigt att skapa medvetenhet gällande solenergi.
Bokfors, Sofie. "Awareness on Solar Energy in Kenya". Thesis, KTH, Energiteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-250019.
Pełny tekst źródłaBorg, Isak, August Dixelius i David Östlund. "Interactive Visualization of Solar Energy Data". Thesis, Uppsala universitet, Institutionen för informationsteknologi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-385793.
Pełny tekst źródłaSverige har en av de lägsta produktionen av solenergi i Europa trots att deras väderförhållanden är jämförbara med Europas största producenter av solenergi. Även fast majoriteten av Sveriges befolkning är villiga att spendera mer pengar på tjänster som kan begränsa klimatförändringar är tillväxten av nya solpaneler långsammare än i andra Europeiska länder med liknande klimat. För att inspirera personer att installara solpaneler har vi skapat en interaktiv karta med information gällande solparker i Uppland. Vårt mål är att programmet skulle öka medvetenheten om solparkers effektivitet i Sverige. Programmet blev sedan installerat på en surfplatta som monterades på en offentlig plats tillsammans med en LED-installation för att nå en så omfattande publik som möjligt. För att dra till sig förbipasserandes uppmärksamhet så kopplades LED-installationen till kartan som visar energiproduktionen hos den valda solparken i en färgskala.
SCILLETTA, CLAUDIA. "Carbon nanotubes for solar energy conversion". Doctoral thesis, Università degli Studi di Roma "Tor Vergata", 2009. http://hdl.handle.net/2108/1039.
Pełny tekst źródłaIt has been demonstrated that nanotechnology and nanomaterials could offer valid solutions to improve the conversion efficiency by exploiting effects induced at mesoscopic scales. In this research field, the activity on carbon nanotubes CNTs as building blocks for solar energy conversion devices is developing. The work presented in this thesis has been devoted to investigate the physical mechanisms underlying the photoresponse generation of multiwall carbon nanotubes (MWCNTs) when exploited in electrochemical cells and solid-state devices. A large part of the activity has consisted of the development of suitable strategies for the controlled growth of MWCNTs. MWCNTs have been synthesised by thermal CVD varying the experimental growth parameters. By using morphological and structural characterization techniques, it has been possible to fix the proper synthesis parameters to obtain controlled MWCNTs structures on specific substrates. Experiments of photochemical current generation by MWCNTs grown on SiO2/Si substrates have been performed as well as solid-state photoconductivity measurements. They have confirmed the capability of MWCNTs to generate a current of electrons under light irradiation, despite their close similarity to metallic graphite. EELS spectra show a shoulder at energies 2-4 eV, below the typical plasmon π -π* peak for HOPG. That can be associated, similarly to SWCNTs, to the presence of van Hove singularities in electronic density of states. These transitions allow the generation upon illumination of an exciton. The electrolyte inside the chemical cell and/or the presence of localized Schottky junctions between different MWCNTs separates the charges. The solid-state photoconductivity results have been compared with those obtained in photochemical experiments, and with other described in literature. On the basis of theoretical calculations of DOS for a specific four-wall carbon nanotube (4WCNT), it is possible to affirm that MWCNTs are able to locally create p-n and/or Schottky junctions with the silicon substrate underneath, giving rise to an extended depletion layer. This implies a modification of the feature in the expected photocurrent spectrum of MWCNTs. MWCNTs have been decorated by Cu nanoparticles and their photoresponse has been studied and compared with that of bare nanotubes. The quantum efficiency of the hybrid system increases over the entire spectrum and two models have been proposed to explain these results. Finally, a first measurement of the performance of a MWCNTs/SiO2/Si device as PV cell has been performed by using a solar simulator. The I-V characteristic under illumination is not the expected well-shaped curve of a PV cell, but it demonstrates that the MWCNT solid-state device can operate as an active power supply element under solar illumination.
Reusswig, Philip David. "Sensitized energy transfer for organic solar cells, optical solar concentrators, and solar pumped lasers". Thesis, Massachusetts Institute of Technology, 2014. http://hdl.handle.net/1721.1/93831.
Pełny tekst źródłaCataloged from PDF version of thesis.
Includes bibliographical references (pages 123-130).
The separation of chromophore absorption and excitonic processes, such as singlet exciton fission and photoluminescence, offers several advantages to the design of organic solar cells and luminescent solar concentrators (LSCs) for the end goal of achieving a lower cost solar energy generation. This thesis explores three new device architectures to overcome limited solar absorption in singlet-exciton-fission based solar cells and neodymium based LSCs. The process of singlet exciton fission is de-coupled from photon absorption, exciton diffusion, and charge transport in singlet-exciton-fission based solar cells by inserting a singlet fission material at the donor-acceptor interface of an organic solar cell. Singlet excitons generated in the singlet exciton donor are transferred to the singlet fission material through near field energy transfer. In this device structure, the singlet donor can be chosen for high photon absorption, exciton diffusion, and charge transport, and the singlet fission sensitizer can be selected for high singlet fission efficiency. We demonstrated a doubling of the external quantum efficiency from 12.8% to 27.6% in a singlet donor (TPTPA) through the introduction of thin film singlet fission sensitizer (rubrene) for high efficiency organic solar cells. To reduce the cost of electricity generated by sunlight via LSC systems, replacing the expensive high efficiency visible photovoltaic (PV) elements with cheap, high efficiency, earth abundant near-infrared PV elements made with silicon. This requires replacing within the LSC the visible emitting chromophores with near infrared emitters. Here, we present the use of a lanthanide ion, neodymium--colloidal nanocrystal energy cascade system as a promising LSC emitter scheme for the silicon spectral region. Peak optical quantum efficiencies of 43% in a Nd³+:glass based LSC are demonstrated with simulated high geometric gain performance. With cascade energy transfer, the optical quantum efficiency in the visible of a Nd³+:glass is significantly improved with peak efficiency of 28%. The enhanced solar absorption of Nd³+:glass through cascade energy transfer can be extended into the infrared with more optimal sensitizers. The idea of directly converting broad-band solar radiation into coherent and narrow-band laser radiation could enable many attractive technologies for solar energy. Here, we present an architecture for solar pumped lasers that uses a luminescent solar concentrator to decouple the conventional trade-off between solar absorption efficiency and the mode volume of the optical gain material. We report a 750-[mu]m-thick Nd³+-doped YAG planar waveguide sensitized by a luminescent CdSe/CdZnS (core/shell) colloidal nanocrystal, yielding a peak cascade energy transfer of 14%, a broad spectral response in the visible portion of the solar spectrum, and an equivalent quasi-CW solar lasing threshold of 20 W-cm2 , or approximately 200 suns. The efficient coupling of incoherent, spectrally broad sunlight in small gain volumes should allow the generation of coherent laser light from intensities of less than 100 suns.
by Philip David Reusswig.
Ph. D.
Santos, Romi Stella dos. "Conservação de energia: uma ferramenta para analisar o aproveitamento de energia solar em instalações residenciais /". Guaratinguetá : [s.n.], 2008. http://hdl.handle.net/11449/99283.
Pełny tekst źródłaBanca: Durval Luiz Silva Ricciulli
Banca: George Alves Soares
Resumo: No Brasil, devido ao forte crescimento da demanda de energia elétrica nas últimas décadas e com a necessidade de atender a esta procura, torna-se indispensável a inclusão no sistema elétrico brasileiro de programas de eficiência energética e a utilização de fontes alternativas de energia, pois com a construção de novas hidrelétricas e termoelétricas para atender o consumidor, ocorre inundações de grandes áreas e diminuição da emissão de gases para a atmosfera, o que causa fortes impactos ambientais. O uso de fontes alternativas também diminui a dependência do Brasil de combustíveis fósseis, pois futuramente ocorrerá o esgotamento de reservas naturais no país, tendo a necessidade de importar energia, o que elevará os preços das tarifas de energia elétrica. Para que haja a conservação de energia proveniente de fontes tradicionais e incentivar a implantação de energia solar no sistema elétrico brasileiro, desenvolveu-se um programa que analisa a viabilidade técnico-econômica de inclusão do sistema fotovoltaico e fototérmico ao sistema tradicional de distribuição de energia nas diversas regiões do Brasil em residências, pois é o setor que possui um maior potencial de economia de energia. O programa é uma ferramenta de fácil manuseio, de acesso rápido que permitem tomadas de decisões rápidas e seguras quanto à implantação de energia solar por parte do consumidor, além de fornecer em qual região é mais viável essa implantação.
Abstract: In Brazil, due to a solid increasing in electrical energy demand at the last decades and due to the need to comply with this demand, became essential the inclusion of energetic efficiency programs and use of alternative energy resources in the Brazilian electrical supply system. However, the new hydro and thermo electrical power plants construction to attend the consumer cause strong environmental impacts, since they need big flooded lakes and eliminate theirs pollutants in the atmosphere, respectively. Moreover, the use of alternative energy resources decreases Brazil dependency of fossil fuels, besides it prevents the breakdown of the natural reserves and the need of energy importation, what would increase the charge for the electrical energy. To the energy conservation provided by traditional resources and to encourage the implementation of a solar energy based system in Brazil, it was developed a software that analyzes technical and economic feasibility of the photovoltaic and photothermical systems introduction in the traditional supply system on the several regions of Brazil to residential use, because this is a sector that has an elevated potential of energy saving. The software has a friendly interface, with quick access that allows the user to take quick and safe decisions, regarding to the solar energy implementation by consumers, and evaluate which area of the country is the most interesting to the implementation.
Mestre
Close, Brett T. "Solar energy research and development in California". Pomona College, 2007. http://ccdl.libraries.claremont.edu/u?/stc,16.
Pełny tekst źródłaMukhopadhyay, Boidurjo. "Solar energy based entrepreneurship and rural development : analysing institutional arrangements that support solar energy entrepreneurs in India". Thesis, University of Sussex, 2017. http://sro.sussex.ac.uk/id/eprint/68229/.
Pełny tekst źródłaAlghamedi, Ramzy. "Luminescent solar concentrator structures for solar energy harvesting and radiation control". Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2017. https://ro.ecu.edu.au/theses/1965.
Pełny tekst źródłaLiu, Suyao, i Li Xie. "Investigation of solar energy utilization in China". Thesis, Högskolan i Gävle, Akademin för teknik och miljö, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-14688.
Pełny tekst źródłaRay, Mike C. T. "Solar Data Analysis". PDXScholar, 2013. https://pdxscholar.library.pdx.edu/open_access_etds/1078.
Pełny tekst źródłaPerumattil, Jose Rose Mary. "The analysis of flat plate solar collector with double-axis solar tracking". Thesis, Högskolan i Halmstad, Akademin för ekonomi, teknik och naturvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-38932.
Pełny tekst źródłaMontornès, Torrecillas Alex. "A study of the shortwave schemes in the Weather Research and Forecasting model". Doctoral thesis, Universitat de Barcelona, 2017. http://hdl.handle.net/10803/401501.
Pełny tekst źródłaL’objectiu principal d’aquesta tesi ´es la identificaci´o i quantificaci´o de les fonts d’error que tenen una contribuci´o directa o indirecta en la precisi´o dels esquemes solars, particularment en aquells disponibles en el model Weather Research and Forecasting (WRF-ARW), `ampliament emprat en el sector de l’energia solar. Les fonts d’error s´on limitacions en la representaci´o del transport radiatiu com a consequ¨`encia del conjunt d’aproximacions assumides per cada esquema. En aquesta tesi hi ha tres fonts d’error que s´on analitzades: i) l’error degut a la discretitzaci´o vertical de l’atmosfera en un conjunt d’estrats que s’assumeixen homogenis (error de truncament, Etrun), ii) l’error com a resultat d’una repre- sentaci´o insuficient de l’estrat entre el cim del model (TOM) i el cim de l’atmosfera (TOA), anomenat error de TOM Etom, i iii) l’error degut a les simplificacions i a les parametritzacions f´ısiques de l’RTE, definit com a error físic, Ephys. Per tal d’evitar la incertesa introdu¨ıda pels altres components del model, el codi font de cadas- cun dels sis esquemes solars ha estat separat del model i adaptat per treballar amb perfils verticals 1-dimensionals. Mitjan¸cant aquest m`etode, les habilitats dels esquemes solars poden ´esser anal- itzades sota condicions d’entrada id`entiques. D’una banda l’error de TOM i el de truncament s’analitzen a partir de perfils ideals. De l’altra, l’error f´ısic s’evalua prenent dades de radiosondatge com a perfil vertical i comparant les sortides dels esquemes radiatius amb mesures en superf´ıcie. Els resultats d’aquesta tesi mostren que l’Etom esdev´e negligible per la majoria d’aplicacions de mesoscala. Per configuracions t´ıpiques del model, l’Etrun en condicions de cel ser`e es troba al voltant de l’1.1%, el 0.9% i el 4.9% per la GHI, DHI i DIF, respectivament. En el cas amb nu´vols augmenta de forma significativa. L’estudi de l’Ephys mostra una relaci´o significativa amb el contingut de vapor d’aigua i els aerosols.
Escobedo, João Francisco. "Refrigeração com uso de energia solar". Universidade de São Paulo, 1987. http://www.teses.usp.br/teses/disponiveis/54/54132/tde-28052009-094024/.
Pełny tekst źródłaA numerical simulation of the adsorption refrigeration cycle was made for zeolite/water and activated carbon(AC-35)/ methanol pairs, to select the pair and the solar collector in the prototype. The fabricated prototype consists of a cylindrical paraolic concentrator with solar trackins, a heat pipe and the refrigeration unit (with the zeolite/water pair). The technical aspects of values, welds and out-gassing are analyzed. The results of the performance tests are presented, discussed and compared with the literature. An analysis of costs is made. In parallel thermopiles were constructed using the evaporation method. These thermopiles were used in the construction of the piranometer and the pirheliometer. The instruments were characterized in terms of: sensitivity, stability with time, linearity, effects of temperature and natural convenction. The results of this characterization are discussed and compared with a model made by Eppley. Finally, in Apendix I, we tested the performance of a flat plate collector using a selective coating of aluminium oxide (developed in IFQSC) as absorber. The Best conditions for obtaining the seletive coating on big size plates are discussed.
Claudino, Filho Vicente de Vasconcelos. "Desenvolvimento de um coletor Fresnel para sistema de climatização dessecante". Universidade Federal da Paraíba, 2016. http://tede.biblioteca.ufpb.br:8080/handle/tede/8678.
Pełny tekst źródłaMade available in DSpace on 2016-09-23T16:07:12Z (GMT). No. of bitstreams: 1 Dissertação.pdf: 2848624 bytes, checksum: f5075c15190584601d6a5374e1d06fd7 (MD5) Previous issue date: 2016-06-22
Brazil has as a main source for production of electricity the dams using water to drive the turbines and as a secondary source are used the thermoelectric power plants that use fuel oil for electric power production. Both generate a large environmental impact, due to the fact of the dams need huge areas for its construction, which often leads to destruction of important ecosystems in the region where it will be installed the hydroelectric plant, besides the fact that they need the rainfall cycle so that the dams have the operating capacity, while the thermoelectric power plants burn fossil fuels thus increasing emissions of CO2 to the atmosphere. An alternative to the solution of the problems mentioned above is the use of renewable sources of energy, with emphasis on this work. Solar energy can be divided into two parts: thermal and photovoltaic. This work it is focused on thermal use of solar energy, with a Fresnel-type solar concentrator to heat water, which will trigger a cooling system environment with the use of desiccant rotors. The choice of type Fresnel collector gave the field of development of this hub is still in constant growth and by the fact that even occupy a relatively small area when compared to other solar thermal concentrators, in addition to its construction be simple and low cost when again compared to other solar concentrators.
O Brasil tem como fonte principal para produção de energia elétrica as hidrelétricas que utilizam água para movimentar as turbinas e como fonte complementar são utilizadas as termoelétricas que usam óleo combustível para produção de energia elétrica. Ambas geram um grande impacto ambiental, devido ao fato das hidrelétricas necessitarem de enormes áreas para a construção das represas, o que muitas vezes acarreta na destruição de ecossistemas importantes para a região onde irá ser instalada a hidrelétrica, além do fato que elas necessitam do ciclo das chuvas para que as represas possuam capacidade de operação, enquanto que as termoelétricas queimam combustíveis fosseis, aumentando assim as emissões de CO2 para a atmosfera. Uma alternativa para a solução dos problemas citados anteriormente é a utilização de fontes renováveis de energia, dando ênfase neste trabalho a energia solar. A energia solar pode ser dividida em duas vertentes: térmica e fotovoltaica. Este trabalho está voltado para a utilização térmica da energia solar, através da utilização de um concentrador solar do tipo Fresnel para o aquecimento de água, a qual irá acionar um sistema de refrigeração de ambientes com a utilização de rotores dessecantes. A escolha do coletor do tipo Fresnel se deu pelo campo de desenvolvimento deste concentrador estar ainda em constante crescimento e pelo fato do mesmo ocupar uma área relativamente pequena quando comparado com outros concentradores solares térmicos, além de sua construção ser simples e de baixo custo quando novamente comparada a outros concentradores solares.
Niaparast, Shervin. "ENERGY ANALYSIS OF A SOLAR BLIND CONCEPT INTEGRATED WITH ENERGY STORAGE SYSTEM". Thesis, KTH, Kraft- och värmeteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-131419.
Pełny tekst źródłaKang, Ji-Hwan. "Energy transfer enhancement of photon upconversion systems for solar energy harvesting". Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/45846.
Pełny tekst źródłaBrito, Jose Clet. "Estudo sobre piscina solar". [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263402.
Pełny tekst źródłaDissertação (mestrado profissional) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica
Made available in DSpace on 2018-08-09T17:08:37Z (GMT). No. of bitstreams: 1 Brito_JoseClet_M.pdf: 4633715 bytes, checksum: 1c1eff1cb154ddf97b9f0996fa4289bf (MD5) Previous issue date: 2006
Resumo: Neste trabalho apresentamos um estudo sobre piscina solar, como retentora de energia térmica, para futura transformação em energia elétrica, sendo esta constituída por 03 camadas de água salgada com gradientes de densidades diferentes e em ordem crescente de cima para baixo, fazendo com que obtivéssemos 03 temperaturas também em ordem crescente. Fizemos o seu monitoramento durante onze dias, e os dados obtidos nos ensaios permitiram uma análise das diferenças entre as temperaturas final e inicial, da zona de armazenamento, zona intermediária, zona de superfície e o rendimento ao longo dos onze dias no intervalo de tempo das 8:00h. às 17:00h., conforme mostra as tabelas 4.1 a 4.12. A apresentação dos resultados em forma de gráfico é muito importante, pois permite extrair com mais realidade os parâmetros que descrevem, de forma simples, o omportamento da piscina solar de gradiente salino. As variações de temperatura de cada zona, para melhor visualização gráfica, são apresentadas nos gráficos 4.1 a 4.11, sendo nas ordenadas as temperaturas médias e nas abscissas os tempos. E, no gráfico 4.12, o rendimento em função da temperatura média. Após a realização dos ensaios, os pontos foram plotados, gerando os gráficos 4.1 a 4.12. Utilizamos o valor médio diário da radiação solar incidente, como sendo 837,34W/m2, segundo dados da Tese de Mestrado de LOPES, (2004), para latitude de 2,55º em relação a linha do equador em São Luís do Maranhão e a potência total disponível de 164,41W. Os dados experimentais informam que a temperatura máxima da zona de armazenamento foi obtido no 2º ensaio, correspondendo a 45ºC e sua eficiência máxima de 13,09%, obtido no 5º ensaio, com intervalo de confiabilidade, respectivamente iguais a [4,26 ; 8,26]% e [5,16 ; 6,32]ºC, conforme demonstrativo nos apêndices: D.2.10.2 e D.5.8.2
Abstract: In this work we present a study on solar swimming pool, as retainer of thermal energy, for future transformation in electric energy, being this consisting by 03 salty with gradients of different densities and orderly water layers increasing from top to bottom, making with that we also got 03 temperatures orderly increasing. We made its monitoramento during eleven days, and the data gotten in the assays had allowed an analysis of the differences between the temperatures final and initial, of the zone of storage, intermediate zone, zone of surface and the income to the long one of the eleven days in the interval of time of 8:00h. to 17:00h., as it shows to tables 4,1 the 4.12. The presentation of the results in graph form is very important, therefore it allows to extract with more reality the parameters that they describe, of simple form, the behavior of the solar swimming pool of saline gradient. The variations of temperature of each zone, for better graphical visualization, are presented in graphs 4,1 the 4,11, being in commanded the average temperatures and the abscissas the times. E, in the graph 4,12, the income in function of the average temperature. After the accomplishment of the assays, the points had been located, generating graphs 4,1 the 4.12. We use the daily average value of the incident solar radiation, as being 837,34W/m2, according to data of the Thesis of Mestrado of LOPES, (2004), for latitude of 2,55º in relation the line of the equator in São Luís of the Maranhão and the available total power of 164,41W. The experimental data inform that the maximum temperature of the storage zone was gotten in 2º assay, corresponding 45ºC and its maximum efficiency of 13,09%, gotten in 5º assay, with trustworthiness interval, respectively equal [ 4,26; 8,26]% and [ 5,16; 6,32]ºC, as demonstrative in the appendices: D.2.10.2 and D.5.8.2
Mestrado
Instrumentação e Controle Industrial
Mestre em Engenharia Mecânica
Arthur, A. C. "A novel solar-savings fraction prediction methodology for integral passive solar water heaters". Thesis, Cranfield University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.237552.
Pełny tekst źródłaAlves, Alceu Ferreira [UNESP]. "Desenvolvimento de um sistema de posicionamento automático para painéis fotovoltaicos". Universidade Estadual Paulista (UNESP), 2008. http://hdl.handle.net/11449/101817.
Pełny tekst źródłaA necessidade de oferecer alternativas para energização de propriedades rurais de pequeno porte com eficiência, confiabilidade e custo acessível, motivou a realização desta pesquisa, cujo enfoque principal foram os sistemas fotovoltaicos e a busca por um melhor desempenho destes sistemas a partir de estratégias de posicionamento dos painéis solares em direção ao Sol. Este trabalho apresenta o desenvolvimento experimental de um conjunto posicionador automático para módulos fotovoltaicos e a avaliação do funcionamento deste conjunto considerando-se o aumento na geração de energia elétrica em função da complexidade de implementação e do consumo de energia pelo próprio sistema de movimentação, além de seus custos de implantação. Foi projetado e implementado um dispositivo eletromecânico simplificado, capaz de sustentar e movimentar um módulo fotovoltaico ao longo do dia e ao longo do ano, sempre mantendo sua superfície direcionada em posição perpendicular aos raios solares incidentes. Utilizaram-se motores de passo, controlador lógico programável e componentes de baixo custo, que resultaram em um conjunto de manutenção simplificada,sem uso de sensores e com otimização dos movimentos, devido ao ajuste de inclinação do painel ser realizado somente uma vez ao dia. A avaliação do ganho na geração de energia elétrica baseou-se na coleta dos dados elétricos (tensão e corrente) e ambientais (insolação e temperatura) de dois sistemas fotovoltaicos com as mesmas características, instalados lado a lado, sujeitos às mesmas condições de insolação, temperatura e carga elétrica, sendo um fixo e outro móvel. A partir dos resultados obtidos concluiu-se pela viabilidade da proposta, não apenas pelo êxito no aumento da geração de energia, mas também pela boa relação custo/benefício, indicando que o sistema posicionador desenvolvido mostra-se vantajoso...
The need to offer alternatives of electricity supply to the small rural properties, providing them with efficiency, reliability and accessible cost, has motivated the development of this research, whose main approach was photovoltaic systems and the search for better performance of these systems with the solar panels positioning toward the sun. This work presents the experimental development of an automatic positioning system for photovoltaic modules and the evaluation of this system’s behavior taking in account the increase in generation of electric energy as a function of the complexity of implementation and the consumption of energy by the movement system itself, and its costs of implantation also. It was designed and built a simplified electromechanical device, which is able to support and to move a photovoltaic module along the day and along the year, always keeping its surface aimed to the sun rays. Stepper motors, programmable logic controller and low cost components were used, and these have resulted on a simplified maintenance set, with no sensors and optimization of movements, due the adjustment of panel’s inclination take place only once a day. The methodology adopted to evaluate the gain in the electricity generation was based on the acquisition of electrical data (voltage and current) and environmental data (insolation and temperature) from two photovoltaic systems whose have identical physical and electrical characteristics and were installed side by side, submitted to the same conditions of insolation, temperature and electric load. One of the solar panels was mounted on a fixed mechanical structure, and the other one on a mobile structure.The obtained results demonstrate the feasibility of the proposed mobile system, not only because of the real increase observed in electric energy generation, but also by the excellent cost effectiveness obtained... (Complete abstract click electronic access below)
Oliveira, Táyzer Damasceno. "Facades and solar parking yield estimation at Ultrecht University". Master's thesis, Universidade de Évora, 2020. http://hdl.handle.net/10174/26741.
Pełny tekst źródłaCanto, Mario Afonso Ribeiro do. "Projeto e desenvolvimento de um sistema automatizado para monitoramento de fontes alternativas de energia /". Guaratinguetá : [s.n.], 2007. http://hdl.handle.net/11449/99291.
Pełny tekst źródłaBanca: Samuel Euzedice de Lucena
Banca: Osiris Canciglieri Junior
Resumo: A utilização de fontes alternativas e renováveis de energia apresenta-se como um recurso energético com um mínimo de impacto ambiental. Com o crescimento do uso destes recursos, torna-se importante o conhecimento dos mesmos do comportamento em relação às condições ambientais naturais. As alterações das condições climáticas, por vezes, causam incertezas quanto ao rendimento dos sistemas alternativos e renováveis de geração de energia. Este trabalho apresenta-se como uma forma de conhecimento do comportamento das fontes de energia perante diversas condições do clima. Esta dissertação tem por objetivo contribuir com o conhecimento sobre o comportamento de fontes alternativas de energia comerciais e desenvolvidas no Centro de Energias Renováveis da UNESP de Guaratinguetá. Neste trabalho, foi desenvolvido um sistema de aquisição e tratamento de dados para monitorar o comportamento de fontes alternativas e renováveis de energia e das condições ambientais. Nesse sistema são especificados sensores para monitoramento das condições ambientais e para monitoramento dos dispositivos componentes das fontes de energia alternativa. O desenvolvimento de um software para coleta de dados e controle dos dispositivos de medição é parte integrante do trabalho para viabilizar o acesso às informações de forma a facilitar a análise de resultados. O protótipo construído durante o desenvolvimento da dissertação possibilitou o monitoramento das fontes de energia do laboratório como também das condições atmosféricas locais.
Abstract: The renewable and alternative energy sources utilization presents-itself as an energy resource with a minimum environmental impact. With the growth of the use of these resources, becomes so important the knowledge of the performace regarding to the natural environmental conditions. The climatic conditions alterations, for times, cause users doubts of confidance of the renewable and alternative systems performance in energy generation. This work presents-itself as a form of knowledge of the performance of the energy sources to diversiity climate conditions. This dissertation has for objective contribute with the knowledge about the performance of commercial and alternative energy sources and developed in the Renewable Energies Center of the UNESP, Guaratinguetá. Was developed a system of data acquisition and analysis for monitoring renewable and alternative energy sources and environmental conditions. In this work, are determined and specified sensors for monitoring of the environmental conditions and for monitoring of the devices components of the alternative energy.sources The development of a data aquisition software and control of measurement is a part to make easy the access the information to facilitate the results analysis. The prototype built during the dissertation development enabled the energy sources monitoring of the center as also of the local atmospheric conditions.
Mestre