Zaloguj się

Gotowe bibliografie tematyczne / Single stage design / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Single stage design.

Artykuły w czasopismach na temat „Single stage design”

Autor: Grafiati

Data publikacji: 8 września 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Single stage design”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Huber, L., i M. M. Jovanovic. "Design optimization of single-stage single-switch input-current shapers". IEEE Transactions on Power Electronics 15, nr 1 (styczeń 2000): 174–84. http://dx.doi.org/10.1109/63.817375.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Gouge, M. J., S. K. Combs, P. W. Fisher i S. L. Milora. "Design considerations for single‐stage and two‐stage pneumatic pellet injectors". Review of Scientific Instruments 60, nr 4 (kwiecień 1989): 570–75. http://dx.doi.org/10.1063/1.1140365.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Sun, Bao Wen, i Yun Xi Wu. "Single-Stage Power Factor Correction (PFC) Converter Design". Applied Mechanics and Materials 687-691 (listopad 2014): 3383–86. http://dx.doi.org/10.4028/www.scientific.net/amm.687-691.3383.

Pełny tekst źródła

Streszczenie:

A single-stage PFC converter was introduced in this paper, then the converter EMI filters, converters inductors, high-frequency transformers and power components were designed and chosen, proven to good effect.

Style APA, Harvard, Vancouver, ISO itp.

4

Soltanalian, Mojtaba, Heng Hu i Petre Stoica. "Single-stage transmit beamforming design for MIMO radar". Signal Processing 102 (wrzesień 2014): 132–38. http://dx.doi.org/10.1016/j.sigpro.2014.03.013.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Onwulata, C. I., i N. Goldberg. "Design of a single-stage mechanical fat separator". Journal of the American Oil Chemists' Society 74, nr 6 (czerwiec 1997): 679–83. http://dx.doi.org/10.1007/s11746-997-0200-3.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Vemparala, Vignesh, Arun Tom Mathew i Tirumala Rao Koka. "Design of single piece sabot for a single stage gas gun". IOP Conference Series: Materials Science and Engineering 263 (listopad 2017): 062059. http://dx.doi.org/10.1088/1757-899x/263/6/062059.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Rosàs-Canyelles, Elisabet, Andrew J. Modzelewski, Alisha Geldert, Lin He i Amy E. Herr. "Assessing heterogeneity among single embryos and single blastomeres using open microfluidic design". Science Advances 6, nr 17 (kwiecień 2020): eaay1751. http://dx.doi.org/10.1126/sciadv.aay1751.

Pełny tekst źródła

Streszczenie:

The process by which a zygote develops from a single cell into a multicellular organism is poorly understood. Advances are hindered by detection specificity and sensitivity limitations of single-cell protein tools and by challenges in integrating multimodal data. We introduce an open microfluidic tool expressly designed for same-cell phenotypic, protein, and mRNA profiling. We examine difficult-to-study—yet critically important—murine preimplantation embryo stages. In blastomeres dissociated from less well-studied two-cell embryos, we observe no significant GADD45a protein expression heterogeneity, apparent at the four-cell stage. In oocytes, we detect differences in full-length versus truncated DICER-1 mRNA and protein, which are insignificant by the two-cell stage. Single-embryo analyses reveal intraembryonic heterogeneity, differences between embryos of the same fertilization event and between donors, and reductions in the burden of animal sacrifice. Open microfluidic design integrates with existing workflows and opens new avenues for assessing the cellular-to-molecular heterogeneity inherent to preimplantation embryo development.

Style APA, Harvard, Vancouver, ISO itp.

8

Son, Yoolee, i Taebok Kim. "Two-stage capacity design problem in a single-collector-single-remanufacturer system". International Journal of Procurement Management 8, nr 3 (2015): 272. http://dx.doi.org/10.1504/ijpm.2015.069154.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Petrakova, Ekaterina A., i Vladislav A. Sumatokhin. "Forecasting the main dimensions of single-stage cylindrical reducers at early design stages". Nauchno-tekhnicheskiy vestnik Bryanskogo gosudarstvennogo universiteta 5, nr 3 (25.09.2019): 386–95. http://dx.doi.org/10.22281/2413-9920-2019-05-03-386-395.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Stanley, Douglas O., Walter C. Engelund, Roger A. Lepsch, Mark McMillin, Kathryn E. Wurster, Richard W. Powell, Tony Guinta i Resit Unal. "Rocket-powered single-stage vehicle configuration selection and design". Journal of Spacecraft and Rockets 31, nr 5 (wrzesień 1994): 792–98. http://dx.doi.org/10.2514/3.26514.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Rackov, Milan, Siniša Kuzmanović, Ivan Knežević, Maja Čavić, Marko Penčić, Vladimir B. Algin, Victor E. Starzhinsky i Sergey V. Shil’ko. "Design solutions overview of single-stage universal gear reducers". MATEC Web of Conferences 317 (2020): 01005. http://dx.doi.org/10.1051/matecconf/202031701005.

Pełny tekst źródła

Streszczenie:

Today, for almost all products, the appearance is very important. Thus, for example, the appearance of universal gear reducers was not given so much attention, but today there are many very interesting solutions of shape, colour and graphic design. It should have in mind that universal gear reducers have much complex construction comparing them with special gear reducers. In the same time, they have to provide different positions and way of mounting and different speeds with different powers (torques) at the output shaft. Particularly, it should be noticed, that within all universal gear reducers single-stage gear units are nowadays increasingly used because their gear ratio values are increased (values of gear ratio can go up to 15) so that these reducers largely cover most of the two-stage gear reducers with their gear ratio values, so thereby their exploitation is significantly increased. Single-stage gear reducers are very simple products, and today there is a large number of manufacturers of such product. However, their mounting dimensions and way of mounting are not defined by a standard, so there is a variety of units with different dimensions and way of mounting. Although, most manufacturers look up to dimensions of leading manufacturers (usually SEW) in order to ensure greater exchangeability of their gear units. It is interesting to note, that most manufacturers tend to adopt the design of housing that will be substantially different from competing solutions. The reason is probably to avoid the possibility of being accused of copying someone else’s solution. However, there are manufacturers that retain almost identical housing design as a competing solution (probably they bought the licence or the solution is copied without permission). This paper considers only the design solutions of single-stage gear reducer in order to indicate the expected directions of their further development.

Style APA, Harvard, Vancouver, ISO itp.

12

Amrani, Fayçal, Mohamed Trabelsi, Rachida Youhami i Rabia Aksas. "New design method of the single stage distributed amplifier". Microelectronics Journal 52 (czerwiec 2016): 111–16. http://dx.doi.org/10.1016/j.mejo.2016.03.016.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Villarejo, Jos A., Javier Sebastian, Fulgencio Soto i Esther de Jodar. "Optimizing the Design of Single-Stage Power-Factor Correctors". IEEE Transactions on Industrial Electronics 54, nr 3 (czerwiec 2007): 1472–82. http://dx.doi.org/10.1109/tie.2007.894734.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Woinowsky-Krieger, M., J. P. Lavoie, E. P. Vlasic i S. H. Moustapha. "Off-Design Performance of a Single-Stage Transonic Turbine". Journal of Turbomachinery 121, nr 2 (1.04.1999): 177–83. http://dx.doi.org/10.1115/1.2841299.

Pełny tekst źródła

Streszczenie:

This paper presents results of rig testing of a transonic, single-stage turbine at off-design conditions. Mapping of the 3.4 pressure ratio, 1.9 stage loading turbine ranged from 70 through 120 percent of design speed and 75 to 125 percent of design pressure ratio. Results show expansion efficiency dropping over 4 percent from 100 to 80 percent of design speed at design pressure ratio, while remaining within half a percent from 90 to 110 percent of design pressure ratio at design speed. Efficiency lapse rate from equivalent sea-level to cruise altitude Reynolds numbers at the design point was measured and found to be worth over 1.5 percent. Analyses of test results using a viscous three-dimensional solver showed very good agreement for the efficiency change with speed.

Style APA, Harvard, Vancouver, ISO itp.

15

Dan-Abia, Dan E., Akaninyene Obot i Kufre M. Udofia. "Design and Analysis of a Multistage Common Emitter Amplifier for Low Frequency Applications". European Journal of Engineering Research and Science 4, nr 10 (19.10.2019): 87–92. http://dx.doi.org/10.24018/ejers.2019.4.10.1431.

Pełny tekst źródła

Streszczenie:

The design and analysis of the multistage common emitter (CE) amplifier for improved voltage gain over the single stage CE amplifier is presented in this paper. The design procedure started with the design of a single stage CE amplifier. The design specifications for the CE amplifier were specified. The design of the multistage CE amplifier was done using the designed single stage CE amplifier as the basic configuration. The designed single stage and multistage CE amplifiers were simulated in the linear technology simulation program with integrated circuit emphasis (LT SPICE). The results obtained show that using analytical method a voltage gain of 45 dB was obtained for the single stage and 54 dB was obtained for the multistage respectively, the LT SPICE simulation software presented a result of 44 dB for the single stage and 54 dB for the multistage. The proposed amplifier may find suitable applications in devices operating in the low frequency such as audio signal applications. Furthermore, judging from these results coupling of more stages of the transistor amplifier to obtain greater voltage, current and power gains is recommended.

Style APA, Harvard, Vancouver, ISO itp.

16

Dan-Abia, Dan E., Akaninyene Obot i Kufre M. Udofia. "Design and Analysis of a Multistage Common Emitter Amplifier for Low Frequency Applications". European Journal of Engineering and Technology Research 4, nr 10 (19.10.2019): 87–92. http://dx.doi.org/10.24018/ejeng.2019.4.10.1431.

Pełny tekst źródła

Streszczenie:

The design and analysis of the multistage common emitter (CE) amplifier for improved voltage gain over the single stage CE amplifier is presented in this paper. The design procedure started with the design of a single stage CE amplifier. The design specifications for the CE amplifier were specified. The design of the multistage CE amplifier was done using the designed single stage CE amplifier as the basic configuration. The designed single stage and multistage CE amplifiers were simulated in the linear technology simulation program with integrated circuit emphasis (LT SPICE). The results obtained show that using analytical method a voltage gain of 45 dB was obtained for the single stage and 54 dB was obtained for the multistage respectively, the LT SPICE simulation software presented a result of 44 dB for the single stage and 54 dB for the multistage. The proposed amplifier may find suitable applications in devices operating in the low frequency such as audio signal applications. Furthermore, judging from these results coupling of more stages of the transistor amplifier to obtain greater voltage, current and power gains is recommended.

Style APA, Harvard, Vancouver, ISO itp.

17

Ye, Wenbin. "Multiplierless Multiple-Stage Cascaded FIR Filter Design". Journal of Circuits, Systems and Computers 24, nr 01 (10.11.2014): 1550011. http://dx.doi.org/10.1142/s0218126615500115.

Pełny tekst źródła

Streszczenie:

It is well known that multiplierless finite impulse response (FIR) filters in multiple-stage cascade form can achieve lower hardware cost and lower coefficient sensitivity than that of single stage design. In this work, a novel algorithm is proposed for the design of multiplierless multiple-stage cascaded FIR filters. Unlike to the conventional algorithms in which the number of stages is fixed and usually is fixed to two, the number of stage in the proposed algorithm is automatically determined. The design examples show that the proposed algorithm significantly outperforms the best existing algorithm in terms of hardware cost and the design time is also saved.

Style APA, Harvard, Vancouver, ISO itp.

18

Arora, Rajat, Ramraj H. Sundararaj i Abhijit Kushari. "An Iterative Approach towards Single stage Axial Fan Design using Off Design Prediction". Defence Science Journal 71, nr 5 (2.09.2021): 581–87. http://dx.doi.org/10.14429/dsj.71.16699.

Pełny tekst źródła

Streszczenie:

A single-stage axial fan having a pressure ratio of 1.01 is designed in the current study. The design pressure ratio is chosen based on the power available from the existing motor (2.2 kW). The design space for the axial flow fan was generated by varying specific flow and geometrical parameters in suitable steps, using a program written in MATLAB. The varied flow parameters are mass flow rate, inlet Mach number, inlet flow angle, and rotor speed. The geometrical parameters that were varied are hub to tip ratio, aspect ratio, and blade solidity. Using these as the input variables and applying free vortex theory for 3-dimensional blade design, the aerodynamic design of the axial flow fan was carried out. Performance parameters like flow coefficient, stage loading coefficient, degree of reaction, diffusion factor, De Haller’s number, and blade angles were calculated at the blade’s hub, mean, and tip. Total design space of 92160 data points was obtained from the combination of input parameters. Several constraints were applied to optimise the design space based on the available power from the existing motor and in-house manufacturing limitations. The initial design space was reduced to 82 data points using these constraints. To further reduce the number of points in the design space, off-design performance was evaluated for each of these data points. Following this, one design point was selected based on the optimum performance range in off-design operation, while considering manufacturing limitations. Using Mellor charts, a suitable blade profile was chosen based on the inlet and exit blade angles. NACA 65-410 airfoil was selected with a stagger of 55 degrees and an incidence of 6 degrees for optimum performance.

Style APA, Harvard, Vancouver, ISO itp.

19

Singh, Rashmi, i Rajesh Mehra. "Low Noise Amplifier using Darlington Pair At 90nm Technology". International Journal of Electrical and Computer Engineering (IJECE) 8, nr 4 (1.08.2018): 2054. http://dx.doi.org/10.11591/ijece.v8i4.pp2054-2062.

Pełny tekst źródła

Streszczenie:

<p class="Abstract"><span>The demand of low noise amplifier (LNA) has been rising in today’s communication system. LNA is the basic building circuit of the receiver section satellite. The design concept demonstrates the design trade off with NF, gain, power consumption. This paper reports on with analysis of wideband LNA. This paper shows the schematic of LNA by using Darlington pair amplifier. This LNA has been fabricated on 90nm CMOS process. This paper is focused on to make comparison of three stage and single stage LNA. Here, the phase mismatch between these patameters is quantitavely analyzed to study the effect on gain and noise figure (NF). In this paper, single stage LNA has shown the 23 dB measured gain, while the three stages LNA has demonstrated 29 dB measured gain. Here, LNA designed using darlington pair shows low NF of 3.3-4.8 dB, which comparable to other reported single stage LNA designs and appreciably low compared to the three stages LNA. Hence, findings from this paper suggest the use of single stage LNA designed using Darlington pair in transceiver satellite applications.</span></p>

Style APA, Harvard, Vancouver, ISO itp.

20

Kayser, R. "New German design guideline for single stage activated sludge plants". Water Science and Technology 41, nr 9 (1.05.2000): 139–45. http://dx.doi.org/10.2166/wst.2000.0190.

Pełny tekst źródła

Streszczenie:

The German design guideline A 131 “Design of single stage activated sludge plants” was amended in 1999. The main changes of the guideline from 1991 are outlined. The design procedure for plants with nitrogen and phosphorus removal is presented.

Style APA, Harvard, Vancouver, ISO itp.

21

Jang, Yungtaek, i Milan M. Jovanovic. "The Single-Stage Taipei Rectifier—Design Consideration and Performance Evaluation". IEEE Transactions on Power Electronics 29, nr 11 (listopad 2014): 5706–14. http://dx.doi.org/10.1109/tpel.2014.2298240.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Qi, Wang, Wu Jie i Baohua Lang. "Design of Single-Stage Flyback PFC Converter for LED Driver". TELKOMNIKA (Telecommunication Computing Electronics and Control) 14, nr 4 (1.12.2016): 1263. http://dx.doi.org/10.12928/telkomnika.v14i4.3966.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Tsai-Fu Wu, Yung-Chun Wu i Zing-Ying Su. "Design considerations for single-stage electronic ballast with dimming feature". IEEE Transactions on Industry Applications 37, nr 5 (2001): 1537–43. http://dx.doi.org/10.1109/28.952532.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Buice, Eric S., David Otten, Raymond H. Yang, Stuart T. Smith, Robert J. Hocken i David L. Trumper. "Design evaluation of a single-axis precision controlled positioning stage". Precision Engineering 33, nr 4 (październik 2009): 418–24. http://dx.doi.org/10.1016/j.precisioneng.2008.11.001.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Shahabudeen, P., i G. D. Sivakumar. "Algorithm for the design of single-stage adaptive kanban system". Computers & Industrial Engineering 54, nr 4 (maj 2008): 800–820. http://dx.doi.org/10.1016/j.cie.2007.10.017.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Sivakumar, G. D., i P. Shahabudeen. "Design of single-stage adaptive Kanban system using genetic algorithm". International Journal of Services and Operations Management 4, nr 1 (2008): 125. http://dx.doi.org/10.1504/ijsom.2008.015943.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Jean, Almira, Rusli i Zhongxiang Shen. "Design of wideband hybrid silicon carbide single-stage power amplifier". Microelectronic Engineering 83, nr 1 (styczeń 2006): 20–23. http://dx.doi.org/10.1016/j.mee.2005.10.016.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Kumar Jain, Navneet, Sudhir Aggarwal i R. Bahl. "A 64-Stage Single Bit CMOS Digital Correlator Chip Design". IETE Technical Review 6, nr 3 (maj 1989): 244–47. http://dx.doi.org/10.1080/02564602.1989.11438481.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Fiore, Antonio, i Giuliano Scarcelli. "Single etalon design for two-stage cross-axis VIPA spectroscopy". Biomedical Optics Express 10, nr 3 (28.02.2019): 1475. http://dx.doi.org/10.1364/boe.10.001475.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Chen, Xiao Chuan, Xiao Xia Lai i John K. Gershenson. "Relative Design Cost Estimation at Design Stage Based on Design Features". Applied Mechanics and Materials 26-28 (czerwiec 2010): 625–36. http://dx.doi.org/10.4028/www.scientific.net/amm.26-28.625.

Pełny tekst źródła

Streszczenie:

With the global financial crisis happened, companies and investors pay more attention to development expense. Development costs mainly include design cost at the design stage. We analyze the design process and extract many design factors in order to estimate design cost at the conceptual and embodiment design stage. A number of process-based design features that impact the design cost are considered. These design factors include: 1) the number of performances and constraints, 2) sub-functions level and relationships, and 3) solutions at the conceptual design stage. At the embodiment of the design stage the design factors include: 1) the number of parts and their relationships, 2) the types of materials, 3) load resources, and 4) the number and types of tolerances. We use relative cost to estimate design cost by comparing the number of design factors among designs. To demonstrate the relative design cost estimation in practice, Kodak single-use cameras are used as example products. Use of these methods proves beneficial in estimate design cost in the design process.

Style APA, Harvard, Vancouver, ISO itp.

31

Chung, Tae-Jin, Gun-Woo Moon i Myung-Joong Youn. "Analysis and design of a single-stage single-switch bi-flyback ac/dc converter". International Journal of Electronics 91, nr 1 (styczeń 2004): 25–40. http://dx.doi.org/10.1080/00207210310001658923.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Shrivastava, Ashish, i Bhim Singh. "Single Stage Single Switch Power Supply (S4PS)Design for Low Power HB-LED Lighting". International Journal of Emerging Electric Power Systems 14, nr 1 (30.05.2013): 33–40. http://dx.doi.org/10.1515/ijeeps-2013-0025.

Pełny tekst źródła

Streszczenie:

Abstract This paper presents an improved power quality converter (IPQC)-based power supply design for high brightness light emitting diode (HB-LED) low power lighting. The IPQC circuit uses a Cuk buck-boost converter to operate it in a discontinuous conduction mode (DCM) using the voltage follower technique for the mitigation of harmonic contents present in the AC mains current. Subsequently, reduction in harmonic contents results in improving the power quality indices at the AC mains. Single-stage single switch converter topology is used, which has less component count, size and cost as compared to the two-stage converter topology. DCM operation has an advantage that only output voltage control loop is required as compared to three control loops required in the continuous conduction mode operation. An 18-W LED driver is designed, modeled and simulated using MATLAB/Simulink software for 220 V, 50 Hz AC mains. The performance of the proposed LED driver is observed in terms of total harmonic distortion of the input current (THDi), input power factor (PF) and crest factor (CF) taking into account the strict international standard of IEC 61000-3-2 for class C equipments.

Style APA, Harvard, Vancouver, ISO itp.

33

Délen, Xavier, François Balembois i Patrick Georges. "Design of a high gain single stage and single pass Nd:YVO_4 passive picosecond amplifier". Journal of the Optical Society of America B 29, nr 9 (7.08.2012): 2339. http://dx.doi.org/10.1364/josab.29.002339.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Guo, Bin, Mei Su, Yao Sun, Hui Wang, Bin Liu, Xin Zhang, Josep Pou, Yongheng Yang i Pooya Davari. "Optimization Design and Control of Single-Stage Single-Phase PV Inverters for MPPT Improvement". IEEE Transactions on Power Electronics 35, nr 12 (grudzień 2020): 13000–13016. http://dx.doi.org/10.1109/tpel.2020.2990923.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

CHIBA, Kazuhisa, Shin'ya WATANABE, Masahiro KANAZAKI, Koki KITAGAWA i Toru SHIMADA. "Conceptual design of single-stage launch vehicle with hybrid rocket engine using design informatics". Transactions of the JSME (in Japanese) 80, nr 818 (2014): TRANS0287. http://dx.doi.org/10.1299/transjsme.2014trans0287.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Oboe, R., A. Beghi, P. Capretta i F. C. Soldavini. "A simulation and control design environment for single-stage and dual-stage hard disk drives". IEEE/ASME Transactions on Mechatronics 7, nr 2 (czerwiec 2002): 161–70. http://dx.doi.org/10.1109/tmech.2002.1011253.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

ROH, CHUNG-WOOK, GUN-WOO MOON i MYUNG-JOONG YOUN. "SINGLE-STAGE SINGLE-SWITCHED RECTIFIER/REGULATOR WITH MAGNETIC COUPLED NONDISSIPATIVE SNUBBER". Journal of Circuits, Systems and Computers 13, nr 03 (czerwiec 2004): 557–76. http://dx.doi.org/10.1142/s0218126604001465.

Pełny tekst źródła

Streszczenie:

This paper presents a new single-stage single-switched forward converter with magnetic coupled nondissipative snubber, which gives good power factor correction (PFC), low current harmonic distortion, and tight output voltage regulation. The proposed converter features low switch current and voltage stresses, essential for the design of a single-stage power factor correction converter. The prototype shows that the IEC1000-3-2 requirements are met satisfactorily with nearly unity power factor. This proposed converter with magnetic coupled nondissipative snubber is particularly suited for power supply applications with low power level.

Style APA, Harvard, Vancouver, ISO itp.

38

Place, J. M. M., M. A. Howard i N. A. Cumpsty. "Simulating the Multistage Environment for Single-Stage Compressor Experiments". Journal of Turbomachinery 118, nr 4 (1.10.1996): 706–16. http://dx.doi.org/10.1115/1.2840926.

Pełny tekst źródła

Streszczenie:

The performance of a single-stage low-speed compressor has been measured both before and after the introduction of certain features of the multistage flow environment. The aim is to make the single-stage rig more appropriate for developing design rules for multistage compressors. End-wall blockage was generated by teeth on the hub and casing upstream of the rotor. A grid fitted upstream produced free-stream turbulence at rotor inlet typical of multistage machines and raised stage efficiency by 1.8 percent at the design point. The potential field that would be generated by blade rows downstream of an embedded stage was replicated by introducing a pressure loss screen at stage exit. This reduced the stator hub corner separation and increased the rotor pressure rise at flow rates below design, changing the shape of the pressure-rise characteristic markedly. These results highlight the importance of features of the flow environment that are often omitted from single-stage experiments and offer improved understanding of stage aerodynamics.

Style APA, Harvard, Vancouver, ISO itp.

39

Dodic, Marjan, Branimir Krstic i Bosko Rasuo. "Single rotor helicopter parasite drag estimation in the preliminary design stage". Tehnika 73, nr 1 (2018): 65–77. http://dx.doi.org/10.5937/tehnika1801063d.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Rasheduzzaman, Md, Poria Fajri, Jonathan Kimball i Brad Deken. "Modeling, Analysis, and Control Design of a Single-Stage Boost Inverter". Energies 14, nr 14 (7.07.2021): 4098. http://dx.doi.org/10.3390/en14144098.

Pełny tekst źródła

Streszczenie:

A single-phase, single-stage, differential boost inverter comprises two independently-controlled boost DC-DC converters, with the load connected between their outputs. The net voltage on the load is sinusoidal and has a controllable frequency and magnitude that is larger than that of the DC source. The present work first derives steady-state and small-signal models of the inverter with parasitic elements. The results obtained from the line-to-output transfer function, control-to-output transfer function, open-loop input impedance, and open-loop output impedance models are compared with that of the ones obtained from the experimental testbed. Using the new models, a voltage mode controller is designed in the synchronous reference frame. The regulator design is explored through the use of an example. The results are verified against the small-signal model, then PLECS simulations, and finally a laboratory experiment. The results indicate excellent agreement between the model and experiment during transients in voltage reference, input source voltage, and output load. A sensitivity analysis is performed based on the inverter model considering the parameter variation. Finally, loss and efficiency estimations are provided in this work.

Style APA, Harvard, Vancouver, ISO itp.

41

Tamila, V. A. "Design principes of single-stage rolling mills for machine-building industries". Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 63, nr 3 (1.11.2018): 297–306. http://dx.doi.org/10.29235/1561-8358-2018-63-3-297-306.

Pełny tekst źródła

Streszczenie:

The use of variable profiles in engineering is the most effective way to reduce metal consumption and improve performance, increase the lifetime, reliability of machines and mechanisms, and reduce costs for their production, repair and operation. The purpose of the present work is to systematize the blanks of machine-building industries obtained by methods of plastic deformation and to develop general principes of the con cept of creating single-stage rolling mills on the basis of analysis of their design and operation. Three main classes of profiles are distinguished, differing in the type of the initial workpiece: strip, shaped and tube periodic billets. All these types of blanks can be used as semi-finished products for the production of the main parts of suspension and chassis of cars. Strip billets are widely used for the manufacturing of elastic suspension elements, tubular – for manufacturing of hollow body parts with increased requirements for strength and rigidity, in particular, driving axle housing, semi-axles of cars and trailers, jet engine casings. Shaped periodic profiles of various shapes are used as blanks for hot volumetric stamping. Mills and automatic lines for the rolling of blanks of low-spring springs, under-springs, guide bearings of air suspension, rolling of the bars of the front axle beam, manufacturing of protective elements and semi-axes of agricultural machinery developed under the guidance or with the direct participation of the author are presented. General requirements for the deformation equipment of machine-building industries are formulated. Recommendations to use induction heating and high-temperature thermomechanical treatment are justified. It is not recommended to change the direction of movement of the workpiece in the process chain. As a power drive equipment it is better to take electromechani cal, rather than hydraulic systems. It is also advisable to choose separate drives for each working element of the equipment.

Style APA, Harvard, Vancouver, ISO itp.

42

Lai, Yi-Chih, Ye-Ling Lee i Jia-Yush Yen. "Design and Servo Control of a Single-Deck Planar Maglev Stage". IEEE Transactions on Magnetics 43, nr 6 (czerwiec 2007): 2600–2602. http://dx.doi.org/10.1109/tmag.2007.893530.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Kim, H., i M. Kim. "Duty‐ratio feedforward controller design for single‐stage flyback CCM inverter". Electronics Letters 52, nr 25 (grudzień 2016): 2053–55. http://dx.doi.org/10.1049/el.2016.3658.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Krasyuk, AM, i PV Kosykh. "Design model for bending vibrations of single-stage tunnel fan rotor". IOP Conference Series: Earth and Environmental Science 134 (marzec 2018): 012034. http://dx.doi.org/10.1088/1755-1315/134/1/012034.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Park, Geun-Yong, i Gang-Youl Jeong. "Design and Control of Single-stage LEDConverter with High Power Factor". International Journal of Control and Automation 7, nr 10 (31.10.2014): 301–10. http://dx.doi.org/10.14257/ijca.2014.7.10.28.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Chen, Shih-Yu, Zhu Rong Li i Chern-Lin Chen. "Analysis and Design of Single-Stage AC/DC $LLC$ Resonant Converter". IEEE Transactions on Industrial Electronics 59, nr 3 (marzec 2012): 1538–44. http://dx.doi.org/10.1109/tie.2011.2161649.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

McCullough, James P., i Karen F. Carr. "Stage process design: A predictive confirmation structure for the single case." Psychotherapy: Theory, Research, Practice, Training 24, nr 4 (1987): 759–68. http://dx.doi.org/10.1037/h0085777.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Heydari, Payam, i Mahyar Safiallah. "Evolution of Broadband Amplifier Design: From Single-Stage to Distributed Topology". IEEE Microwave Magazine 24, nr 9 (wrzesień 2023): 18–29. http://dx.doi.org/10.1109/mmm.2023.3284729.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Husev, Matiushkin, Roncero-Clemente, Vinnikov i Chopyk. "Bidirectional Twisted Single-Stage Single-Phase Buck-Boost DC-AC Converter". Energies 12, nr 18 (11.09.2019): 3505. http://dx.doi.org/10.3390/en12183505.

Pełny tekst źródła

Streszczenie:

This paper describes a bidirectional twisted single-phase single-stage buck-boost dc-ac converter based on an output unfolding circuit. This solution is derived by the combination of an inverting buck-boost dc-dc converter and an unfolding circuit. The operation principle, component design guidelines, along with the control approach are presented. The zero-crossing distortion problem is discussed and solved by a simple approach. The simulation and experimental results confirm all theoretical statements. Loss distribution and achievable efficiency are analyzed. Finally, the pros and cons of the proposed solution, along with the most promising application field, are analyzed and discussed in the conclusion.

Style APA, Harvard, Vancouver, ISO itp.

50

Raaed Faleh Hassan, Dr. "Design and software implementation of solid state transformer". International Journal of Engineering & Technology 7, nr 3 (21.08.2018): 1776. http://dx.doi.org/10.14419/ijet.v7i3.16423.

Pełny tekst źródła

Streszczenie:

The work presented in this paper concerned with the analysis, design and software implementation of the Solid State Transformer as an alternative to the conventional power transformer. The proposed transformer aims to perform the same task as the conventional one with additional facilities and advantages. Three stages are considered to configure the Solid State Transformer. The first stage which is known as input stage and implemented using Vienna rectifier which converts the AC voltage of the main supply to a DC voltage. The second stage (isolation stage) step down the DC voltage to a lower level DC voltage. This stage consists of a single – phase five-level diode clamped inverter, 1 KHz step – down transformer and fully controlled bridge rectifier. The output stage (third stage) is a three-phase three-level diode clamped inverter which converts the low level DC voltage to a three-phase, 50 Hz AC voltage. Model Predictive Current Control has been employed for driving transformer’s stages. The gating signal is produced directly when the given cost function is minimized, therefore there is no need of any modulator. Behavior of the proposed structure is achieved by simulation which shows high quality power conversion with low Total Harmonic Distortion.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!