Artykuły w czasopismach na temat „Simulation à base d'objets”

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Simulation à base d'objets.

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Simulation à base d'objets”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Cadiot, Pierre. "Représentations d'objets et sémantique lexicale: Qu'est-ce qu'une boîte?" Journal of French Language Studies 4, nr 1 (marzec 1994): 1–23. http://dx.doi.org/10.1017/s0959269500001952.

Pełny tekst źródła
Streszczenie:
AbstractDans les dictionnaires usuels du français le mot ‘boîte’ est défini à partir d'une valeur de base correspondant à un prototype matéeriel (ou perceptu). Les très nombreux composées (introduits de manière alternante par les prépositions A ou de) qui ne se conferment pas à ce prototype (par exemple, ‘boîte aux lettres’, ‘boîte d';essieu’, ‘boîte de nuit’) sont décrits sous les rubriques ‘fourre-tout’ de ‘spécialité’, ‘analogie’, parfois aussi ‘métaphore’. A ce mode de présentation, une approche non dictionnairique, mais de sémantique lexicale, suggère d'opposer le principe d'un stéréotype ‘intensionnel’ (ou concept) formulé en termes exclusivement fonctionnels (contenir X. et produire/fournir Y.). Mettant a priori les (quasi-) innombrables usages du mot sur un pied d'égalité, cette description permet de rendre justice à cette variété et à cette productivité grâce à une mécanique flexible d'ajustement entre l'instruction stéréotypique générique et les contraintes matérielles spécifiques.
Style APA, Harvard, Vancouver, ISO itp.
2

García-Bañuelos, Luciano, Phuong-Quynh Duong i Christine Collet. "Une infrastructure à base de composants pour la construction de gestionnaires d'objets persistants". Techniques et sciences informatiques 23, nr 9 (1.11.2004): 1161–86. http://dx.doi.org/10.3166/tsi.23.1161-1186.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Hellegouarch, Yves. "Notions De Base Pour L'Arthmetique De Fq((1/t))". Canadian Journal of Mathematics 40, nr 04 (sierpień 1988): 817–32. http://dx.doi.org/10.4153/cjm-1988-036-0.

Pełny tekst źródła
Streszczenie:
Le but de ce travail est de définir un certain nombre d'objets de F q ((1/t) et de fonctions qui sont analogues à des objets classiques de R(ou C) et à des fonctions classiques R → R (ou C → C) : par exemple ζ(l), ζ(2), etc., fractions continues, domaine fondamental du “demi-plan” de Poincaré, séries d'Eisenstein, fonctions multiplement périodiques. Un tel travail avait été entrepris autrefois par E. Artin [2], mais dans un autre esprit, et la fonction zéta que j'ai définie dans [7] n'est pas celle d'Artin, mais celle de Carlitz [3]. L'intersection de la thèse d'Artin et de ce travail n'est donc pas vide, mais elle n'est pas non plus très étendue bien que je me sois limité aux définitions et aux propriétés les plus élémentaires. En revanche, par son esprit, ce travail se rapproche davantage du point de vue de Carlitz.
Style APA, Harvard, Vancouver, ISO itp.
4

Abergel, Violette, Renato Saleri i Hervé Lequay. "Vecteurs aériens téléopérés pour l'acquisition de données spatiales d'objets patrimoniaux, Retour d'expérience". Revue Française de Photogrammétrie et de Télédétection, nr 213 (27.04.2017): 73–79. http://dx.doi.org/10.52638/rfpt.2017.363.

Pełny tekst źródła
Streszczenie:
Le relevé aérien constitue, dans le domaine de l'archéologie et de l'architecture, un vaste champ d'applications et d'intérêt. Au-delà des capacités croissantes des drones existants, le potentiel opérationnel de tels outils dépasse aujourd'hui l'imagination de leur propres créateurs : initialement conçus dans le secteur de la robotique civile et militaire, de récentes expérimentations ont pu tester le vol autonome, la prise de décision automatique, ainsi que l'intelligence distribuée.Avec près de dix ans d'expérience dans le domaine du relevé aérien, le laboratoire MAP a expérimenté un large panel de vecteurs aériens, pilotés ou semi-autonomes, équipés de capteurs de différentes natures, à des fns de télédétection et d'acquisition de données spatiales, ce travail étant principalement dévolu à la modélisation et à la simulation d'environnements 3D à haute valeur patrimoniale. Les compétences du MAP concernent donc la mobilisation de vecteurs aériens sans équipage, mais aussi le développement d'outils experts pour la modélisation et représentation 3D ou encore les protocoles d'analyse d'image dans le domaine de l'architecture, de l'urbanisme et du paysage.
Style APA, Harvard, Vancouver, ISO itp.
5

Woimant, Georges Pierre. "Analyses métallographiques d'objets chaudronnés en métal base cuivre de Beauvais par le laboratoire des Musées de France". Revue archéologique de Picardie 3, nr 1 (1990): 95–96. http://dx.doi.org/10.3406/pica.1990.1612.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Craciun, Paula, i Josiane Zerubia. "Unsupervised marked point process model for boat extraction and counting in harbors from high resolution optical remotely sensed images". Revue Française de Photogrammétrie et de Télédétection, nr 207 (20.06.2014): 33–44. http://dx.doi.org/10.52638/rfpt.2014.2.

Pełny tekst źródła
Streszczenie:
Les modèles de processus ponctuels marquès ont été appliqués avec succès pour l'extraction d'objets à partir d'images optiques de télédétection à haute résolution lors de la dernière décennie. Les modèles se composes typiquement de deux types de termes d'énergie : un terme de données qui reflète la fidélité des configurations à l'image d'entrée et un terme qui intègre des connaissances a priori sur les objets à extraire. Dans cet article, nous traitons le problème de l'extraction des bateaux dans des ports. C'est un problème difficile en raison de la répartition particulière des objets dans ce cas. Nous décrivons un modèle de processus ponctuel marquè à base d'ellipses développé auparavant, pour lequel nous déterminons automatiquement l'un de ses principaux paramètres. Nous présentons quelques-uns des inconvénients de ce modéle en raison des contraintes dures imposées, que nous relaxons ensuite pour rendre le nouveau modèle plus général.
Style APA, Harvard, Vancouver, ISO itp.
7

Chablat, Damien, Fouad Bennis, Bernard Hoessler i Mathieu Guibert. "Périphériques haptiques et simulation d'objets, de robots et de mannequins dans un environnement de CAO-Robotique : eM-Virtual Desktop". Mécanique & Industries 5, nr 2 (marzec 2004): 189–97. http://dx.doi.org/10.1051/meca:2004020.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Mazouzi, Smaine, Zahia Guessoum i Fabien Michel. "Une approche multi-agent pour la segmentation d'images de profondeur à base d'objets polyédriques. Une nouvelle approche de segmentation d'images". Techniques et sciences informatiques 28, nr 3 (30.03.2009): 365–93. http://dx.doi.org/10.3166/tsi.28.365-393.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Klyuchevskii, Anatoly, i Anna Kakourova. "BASE SIMULATION MODEL OF MIGRATING SEISMICITY". Proceedings of Irkutsk State Technical University 115, nr 8 (sierpień 2016): 74–84. http://dx.doi.org/10.21285/1814-3520-2016-8-74-84.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Zöller, Ilka, Nicole Mautes, Wen Ren i Bettina Abendroth. "Knowledge Base for Valid Driving Simulation". ATZ worldwide 117, nr 3 (16.02.2015): 46–49. http://dx.doi.org/10.1007/s38311-015-0173-z.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
11

Bergner, W., P. Packan, B. Seidl i H. Klose. "Emitter-base breakdown: Measurement and simulation". Microelectronic Engineering 19, nr 1-4 (wrzesień 1992): 695–98. http://dx.doi.org/10.1016/0167-9317(92)90524-u.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
12

Hautbois, Xavier. "La Mélodie Solide Ou le Mythe de la Caverne Revisité". Musicae Scientiae 2, nr 2 (wrzesień 1998): 171–97. http://dx.doi.org/10.1177/102986499800200205.

Pełny tekst źródła
Streszczenie:
Cet article traite d'une approche de l'écriture qui développe l'hypothèse du principe d'organicité de la mélodie. A la différence des precédés habituels d'ecriture qui différencient le traitement des notes de celui du rythme, la prise en compte de ce principe se caracterise par une structuration forte régissant les notes et leurs positions respectives dans le temps. Son application se révèle par une représentation dans l'espace géométrique d'objets mélodiques, appelés mélodies solides par analogie avec notre espace visuel. Ces objets peuvent alors être observés et exploités par des outils de transformation mathématiques qui respectent leur structure interne ou, au contraire, la rompent. Une des fonctions particulièrement riche pour tirer profit de ce matériau musical sans le détériorer est la rotation. Son intérèt est multiple dans le cadre compositionnel. D'une part, elle généralise les quatre mouvements symétriques des cellules du contrepoint traditionnel. D'autre part, elle permet une connaissance minutieuse des objets mélodiques facilitée par la simplicité des processus mis en ceuvre. De cette fonction, enfin, découle la possibilité d'aborder une cinématique musicale á travers la succession d'images obtenues par des rotations d'un mème objet de base.
Style APA, Harvard, Vancouver, ISO itp.
13

Petrenko, V. D., i I. O. Sviatko. "SIMULATION OF SUBGRADE EMBANKMENT ON WEAK BASE". Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, nr 4(58) (11.09.2015): 198–204. http://dx.doi.org/10.15802/stp2015/49286.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
14

Lyngfelt, Sven. "Base Catchment Modeling in Urban Runoff Simulation". Hydrology Research 22, nr 3 (1.06.1991): 137–48. http://dx.doi.org/10.2166/nh.1991.0010.

Pełny tekst źródła
Streszczenie:
The selection of numerical model and the transformation of catchment data into ‘input data’ are two fundamental problems in urban runoff simulation. They are discussed from a general point of view. A numerical solution method for the kinematic wave equations is proposed for base catchment modeling. In connection to this solution a methodology for the generation of input data representing the individual base catchment is presented.
Style APA, Harvard, Vancouver, ISO itp.
15

Aminfar, H., i M. Mohammadpourfard. "Lattice Boltzmann simulation of droplet base electrowetting". International Journal of Computational Fluid Dynamics 24, nr 5 (4.01.2010): 143–56. http://dx.doi.org/10.1080/10618560903369169.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
16

Pierreval, Henri, i Séverine Durieux-Paris. "Robust simulation with a base environmental scenario". European Journal of Operational Research 182, nr 2 (październik 2007): 783–93. http://dx.doi.org/10.1016/j.ejor.2006.07.045.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
17

Kanak, Katharine M., Jerry M. Straka i David M. Schultz. "Numerical Simulation of Mammatus". Journal of the Atmospheric Sciences 65, nr 5 (1.05.2008): 1606–21. http://dx.doi.org/10.1175/2007jas2469.1.

Pełny tekst źródła
Streszczenie:
Abstract Mammatus are hanging lobes on the underside of clouds. Although many different mechanisms have been proposed for their formation, none have been rigorously tested. In this study, three-dimensional numerical simulations of mammatus on a portion of a cumulonimbus cirruslike anvil are performed to explore some of the dynamic and microphysical factors that affect mammatus formation and evolution. Initial conditions for the simulations are derived from observed thermodynamic soundings. Five observed soundings are chosen—four were associated with visually observed mammatus and one was not. Initial microphysical conditions in the simulations are consistent with in situ observations of cumulonimbus anvil and mammatus. Mammatus form in the four model simulations initialized with the soundings for which mammatus were observed, whereas mammatus do not form in the model simulation initialized with the no-mammatus sounding. Characteristics of the modeled mammatus compare favorably to previously published mammatus observations. Three hypothesized formation mechanisms for mammatus are tested: cloud-base detrainment instability, fallout of hydrometeors from cloud base, and sublimation of ice hydrometeors below cloud base. For the parameters considered, cloud-base detrainment instability is a necessary, but not sufficient, condition for mammatus formation. Mammatus can form without fallout, but not without sublimation. All the observed soundings for which mammatus were observed feature a dry-adiabatic subcloud layer of varying depth with low relative humidity, which supports the importance of sublimation to mammatus formation.
Style APA, Harvard, Vancouver, ISO itp.
18

Miyake, Norihisa, Tsukasa Shiina, Masayuki Oshiro i Yuji Matsuda. "Interactive Simulation Ride". Journal of Robotics and Mechatronics 14, nr 1 (20.02.2002): 64–67. http://dx.doi.org/10.20965/jrm.2002.p0064.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
19

Folch-Mateu, Pere, i Josep Oriol Esteve. "Multiplicité de la psyché dans les groupes". Revue de psychothérapie psychanalytique de groupe 18, nr 1 (1992): 39–51. http://dx.doi.org/10.3406/rppg.1992.1143.

Pełny tekst źródła
Streszczenie:
Dans le présent travail, il s'agit d'une comparaison dans l'usage de modèles que le psychanalyste emploie au cours de la cure type et de l'analyse du groupe. Aussi bien dans l'une que dans l'autre technique, on constate une situation croisée des lignes interprétatives. Tandis que, dans le traitement individuel, la présence concrète et actuelle de l'analysé dérive, dans la pensée de l’analyste, en un groupe composé d'objets internalisés et de parties du Self, dans la thérapie du groupe, par contre, la factualité de ses membres se rapporte à l'unité du groupe, ce que l'on tâche d'illustrer et de réaffirmer à chaque interprétation. On étudie le processus thérapeutique chez l'individu dans le groupe sur la base de l'introjection de la psyché multiple, incarnée par la factualité du groupe, psyché multiple qui commence par être vécue comme une hypothèse conjecturale de l'analyste de groupe. Cette conjecture serait ranimée à chaque interprétation. L' hypothèse rencontre la conviction de l'individu au groupe à partir des transferts collatéraux entre les différents membres. On suggère que ces transferts équivaudraient aux transferts intrapsychiques (des imagos inconscientes au préconscient ) que Freud (1900) a décrit pour la première fois au chapitre vu de sa Traumdeutung. Ces transferts collatéraux se développeraient, comme on le sait bien, en même temps que le transfert du groupe (au singulier) vis-à-vis de l'analyste.
Style APA, Harvard, Vancouver, ISO itp.
20

Kakourova, Anna, i Anatolii Klyuchevskii. "SIMULATION BASE MODEL OF MIGRATION SEISMICITY: FAULT ZONE". Proceedings of Irkutsk State Technical University 21 (czerwiec 2017): 49–59. http://dx.doi.org/10.21285/1814-3520-2017-6-49-59.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
21

Tian, Hong Fang, Ying Hong Li, Li Zhi Shan i Xiao Qing Hao. "Semi-Physical Simulation Platform Design Base on FMI". Applied Mechanics and Materials 336-338 (lipiec 2013): 498–505. http://dx.doi.org/10.4028/www.scientific.net/amm.336-338.498.

Pełny tekst źródła
Streszczenie:
FMI is put forward by ITEA2, the target is the realization of cross platform, many areas of joint simulation. FMI is a standard interface which is used to implement the simulation. It is complete the following parts of specific functions: To load FMU model which is generated by other software , edit and compile the model , then download to target machine which VxWorks is running on; Realization of seamless connection with VxWorks target machine; Supporting the simulation model which is build by C/C++ language . Through this platform, FMU model and C/C++ model can be used in the Real time operating system of VxWorks, and realize the real time monitoring of simulation data, which make it becoming possible to realization of joint simulation.
Style APA, Harvard, Vancouver, ISO itp.
22

Morrow, Jarrett D., i Brandon W. Higgs. "CallSim: Evaluation of Base Calls Using Sequencing Simulation". ISRN Bioinformatics 2012 (12.12.2012): 1–10. http://dx.doi.org/10.5402/2012/371718.

Pełny tekst źródła
Streszczenie:
Accurate base calls generated from sequencing data are required for downstream biological interpretation, particularly in the case of rare variants. CallSim is a software application that provides evidence for the validity of base calls believed to be sequencing errors and it is applicable to Ion Torrent and 454 data. The algorithm processes a single read using a Monte Carlo approach to sequencing simulation, not dependent upon information from any other read in the data set. Three examples from general read correction, as well as from error-or-variant classification, demonstrate its effectiveness for a robust low-volume read processing base corrector. Specifically, correction of errors in Ion Torrent reads from a study involving mutations in multidrug resistant Staphylococcus aureus illustrates an ability to classify an erroneous homopolymer call. In addition, support for a rare variant in 454 data for a mixed viral population demonstrates “base rescue” capabilities. CallSim provides evidence regarding the validity of base calls in sequences produced by 454 or Ion Torrent systems and is intended for hands-on downstream processing analysis. These downstream efforts, although time consuming, are necessary steps for accurate identification of rare variants.
Style APA, Harvard, Vancouver, ISO itp.
23

Savrasovs, Mihails. "Traffic Flow Simulation on Discrete Rate Approach Base". Transport and Telecommunication Journal 13, nr 2 (1.01.2012): 167–73. http://dx.doi.org/10.2478/v10244-012-0014-8.

Pełny tekst źródła
Streszczenie:
Traffic Flow Simulation on Discrete Rate Approach Base The classical scientific literature dedicated to transport modelling has emphasised three levels of detail on which traffic models could be created. These levels are: microlevel, mesolevel and macroscopic level. Microscopic and macroscopic modelling are well known and widely used. The term ‘mesoscopic modelling’ has been interpreted by different scientists in different ways. In general, mesoscopic traffic flow models are understood to be models where traffic flow is described with a high level of detail, but at the same time flow behaviour and flow interactions are presented with a low level of description. The previously proposed new simulation approach (called ‘mesoscopic simulation’) was applied to traffic flow simulation. All the described models were implemented using Microsoft Excel and VBA. However, the practical application concerns that to construct more sophisticated models Microsoft Excel and VBA could not be used, because of programming complexity. The main goal of this paper is to present examples of the application of the discrete rate approach of ExtendSim simulation software for traffic flow simulation. A literature survey has shown that the discrete rate approach is mainly used in logistics, but not in the area of transport area. So the tasks of this paper are to present the main techniques of model implementation using a discrete rate approach and to apply this approach to traffic flow simulation.
Style APA, Harvard, Vancouver, ISO itp.
24

NISHIKAWA, Kyoei, Miyoko HIWATASHI, Kiku KANBE, Toshiaki SHIIBAYASHI i Kazunori TAKAHASHI. "DATA BASE, FOREST STAND GROWTH MODELING AND SIMULATION". Japanese Journal of Biometrics 8, nr 2 (1987): 2_79–86. http://dx.doi.org/10.5691/jjb.8.2_79.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
25

Pulle, D. W. J. "New data base for switched reluctance drive simulation". IEE Proceedings B Electric Power Applications 138, nr 6 (1991): 331. http://dx.doi.org/10.1049/ip-b.1991.0040.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
26

Sugano, Kiyohiko. "Computational oral absorption simulation of free base drugs". International Journal of Pharmaceutics 398, nr 1-2 (październik 2010): 73–82. http://dx.doi.org/10.1016/j.ijpharm.2010.07.027.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
27

Huang, Xue Zheng, Yang Tao Liu i Lei Zhang. "The Computer Simulation of the Acid-Base Titration". Advanced Materials Research 634-638 (styczeń 2013): 20–24. http://dx.doi.org/10.4028/www.scientific.net/amr.634-638.20.

Pełny tekst źródła
Streszczenie:
The mathematical model on acid-base titration was established by using analytical chemistry theory; therefore the author designed a program to solve the model by using of Visual Basic language. The program can not only calculate the pH Value of the acid-base titration solution, choose the appropriate indicator, calculate the endpoint error and judge the feasibility of the titration, but also can draw the curve of the acid-base titration.
Style APA, Harvard, Vancouver, ISO itp.
28

Shwehdi, M. H., C. M. Hughes i M. A. Quasem. "Base load fuel consumption with radiant boiler simulation". IEEE Transactions on Energy Conversion 7, nr 4 (1992): 677–83. http://dx.doi.org/10.1109/60.182650.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
29

Sobociński, Paweł. "Relational presheaves, change of base and weak simulation". Journal of Computer and System Sciences 81, nr 5 (sierpień 2015): 901–10. http://dx.doi.org/10.1016/j.jcss.2014.12.007.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
30

Glover, N. E., i C. L. Davis. "Thermal cycle simulation of a Ni-base superalloy". Scripta Materialia 34, nr 5 (marzec 1996): 675–84. http://dx.doi.org/10.1016/1359-6462(95)00579-x.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
31

Yu, Wen-jie, Yong-gang Yu i Bin Ni. "Numerical simulation of base flow with hot base bleed for two jet models". Defence Technology 10, nr 3 (wrzesień 2014): 279–84. http://dx.doi.org/10.1016/j.dt.2014.06.010.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
32

Tao, Gui Ming. "Research on Fault Knowledge Acquisition Base of Circuit Simulation". Advanced Materials Research 490-495 (marzec 2012): 1763–66. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.1763.

Pełny tekst źródła
Streszczenie:
To resolve bottle-net problem of knowledge acquisition of fault diagnoses expert system. This paper make use of circuit simulation software Multisim2001module modeling and simulating, acquiring fault data of electric control circuit of missile launching vehicle, acquiring correspondence relation of function-fault, establishing knowledge base of intelligent diagnostic expert system, affording a new thought to resolve knowledge acquisition of expert system. The fault diagnosis expert system is based on the knowledge base, but many fault diagnosis expert systems face the same problem: the knowledge of fault and fault maintenance is very poor. This causes many of intelligent fault diagnosis systems are still in the theoretical research or prototype design stage, and its use value is low, therefore, how to gain more significant and enough knowledge has turned to be the bottleneck which confine the engineering operational capability of fault diagnosis system[1] . This article will build an electrical system dynamic operational model of some equipment by circuit simulation. And it will do the direct current analysis, transient analysis etc. for the circuit by the software’s powerful analyze ability, include the setting of some devices’ voltage value, current value and test point, and gain the simulation parameters of normal conditions and fault conditions. Then lead these data into the database so as to the system to call and search, and confirm the fault node finally [2, 3]. The function simulation which is mentioned in this article is an ingredient of the equipment system simulation; structure simulation and movement simulation are also like it. And it contains system-level simulation, part-level simulation and component-level simulation in the hierarchical division. Because of the limited space, this article just considerate the electricity circuit simulation’s application in the fault knowledge acquisition, which is belong to the function simulation.
Style APA, Harvard, Vancouver, ISO itp.
33

Millet, Pierre-Alain. "Une modélisation objet des processus industriels." Revue Française de Gestion Industrielle 14, nr 3-4 (1.12.1995): 27–37. http://dx.doi.org/10.53102/1995.14.03-4.242.

Pełny tekst źródła
Streszczenie:
Les techniques de la production au plus juste (juste à temps,réduction des temps de cycle, production unitaire, à la commande,configurateur, gestion par activité...) conduisent à rechercher des systèmes d'informations capables de réactivité, flexibilité, communication, intégration...pour s'adapter aux mutations accélérées des technologies et des produits, aux contraintes toujours plus fortes de coûts, délais, qualité. Or, les applications existantes de gestion industrielle s'appuient en général sur le modèle M.R.P et sur la modélisation classique des processus industriels en nomenclatures et gammes linéaires issue de l'entreprise taylorisée. Elles ne peuvent alors prendre en compte la diversité et la complexité des produits et ressources industrielles. Les approches nouvelles de "gestion hiérarchisée" proposent un cadre pour une décentralisation maîtrisée des outils de pilotage de systèmes industriels. Les approches objets constituent un cadre nouveau de modélisation, conception et développement de systèmes informatisés. Cet article propose donc une modélisation orientée objet des processus industriels à partir d'une expérience de terrain dans l'industrie et les services. Cette modélisation hiérarchisée permet de prendre en compte les notions de coproduit, sous-produit, multi-produits, variantes, ressources usables, différenciation retardée, découpe, tri sélectif, bains ou fours avec contraintes de configurations, modélisation à base de règles... Une telle modélisation va dans le sens d'une reconception des applications industrielles autour d'un serveur dynamique d'objets avec contraintes dialoguant avec des serveurs d'optimisation et résolution de problèmes, de communication et messagerie dans une architecture distribuée.
Style APA, Harvard, Vancouver, ISO itp.
34

Zhang, Fu Cai, Qing Wang i Ru Yang. "Analysis to Milling Force Base on AdvantEdge Finite Element Analysis". Advanced Materials Research 981 (lipiec 2014): 895–98. http://dx.doi.org/10.4028/www.scientific.net/amr.981.895.

Pełny tekst źródła
Streszczenie:
Aiming at NC milling processing simulation problem, a ball-end cutter milling force model is established, the numerical simulation analysis of aluminum alloy AL2024 milling process is conducted by using the finite element analysis software AdvantEdge finite element analysis. Focus on the Milling force simulation, the size of the milling force is obtained by simulating calculation. Using the same cutting parameters for milling experiment, the results show that simulation analysis of the cutting force values ​​are in good agreement with the experimental results,the milling force model prior established is correct. The research laid a foundation for the perfect CNC milling simulation system.
Style APA, Harvard, Vancouver, ISO itp.
35

Choi, Gui Yun, Eun Jin Choi, Eun Hee Jo, Young Suk Yoon, Eun Hee Lee i Yang Sin Kim. "A Study on Regional Base of Simulation Training Center". Korean Society of Nursing Research 4, nr 1 (30.03.2020): 65–75. http://dx.doi.org/10.34089/jknr.2020.4.1.65.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
36

Nishio, Naoki, Yasushi Fujimoto i Michihiko Sone. "Preoperative Three-dimensional Surgical Simulation for Skull Base Surgery". Practica Oto-Rhino-Laryngologica 109, nr 12 (2016): 830–31. http://dx.doi.org/10.5631/jibirin.109.830.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
37

Shin, Jae-Ryul, Sung-Young Moon, Su-Hee Won i Jeong-Yeol Choi. "Detached Eddy Simulation of Base Flow in Supersonic Mainstream". Journal of the Korean Society for Aeronautical & Space Sciences 37, nr 10 (1.10.2009): 955–66. http://dx.doi.org/10.5139/jksas.2009.37.10.955.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
38

Zhao, Gang, i Lei Wang. "Research and Simulation Base on Asynchronous Motor Soft Starter". Advanced Materials Research 403-408 (listopad 2011): 3615–19. http://dx.doi.org/10.4028/www.scientific.net/amr.403-408.3615.

Pełny tekst źródła
Streszczenie:
Soft-Starter is a new equipment and it is used to control Squirrel-Cage Induction Motors because of its pefect control effect, compared with the traditional Start method. This paper analysis the superiority of Voltage Ramp and current limit control algorithm.The MATLAB simulation result base on 4.7KW Motor shown that the soft-starter can be used to Reduce the start voltage, limit start Current and Reduce the impact on power. Correctness and validity of algorithms is verified by simulation results.
Style APA, Harvard, Vancouver, ISO itp.
39

Bahrami, Mohammad Reza. "Modeling and Simulation of Non-Contact Base Excited AFM". E3S Web of Conferences 285 (2021): 07035. http://dx.doi.org/10.1051/e3sconf/202128507035.

Pełny tekst źródła
Streszczenie:
AFM has some unique properties such as higher spatial resolution, mapping even a single molecule, simple sample preparation, scanning in different types of medium, and can obtain a 3D scan of the sample surface. Therefore, with the help of AFM, one can obtain a unique understanding of the structure and functional behavior of materials. In this article, to construct the mathematical model of the base excited AFM cantilever mass spring system (lumped parameter model) is used and the solution obtained by the method of Multiple scales. Here, in this work, we consider the AFM operates in the non-contact mode. To study the effect of the non linearity, amplitude of excitation, and damping coefficient, frequency response equation obtained.
Style APA, Harvard, Vancouver, ISO itp.
40

Ranjith, Ramakrishnan, Shanmugasundaram Piramasubramanian i Muthu Ganesh Madhan. "Numerical simulation and analysis of dual base transistor laser". Microwave and Optical Technology Letters 64, nr 5 (11.02.2022): 962–71. http://dx.doi.org/10.1002/mop.33186.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
41

WU, Chunlong, Qingyan XU, Jichun XIONG, Zhonglin LI, Jiarong LI i Baicheng LIU. "NUMERICAL SIMULATION OF RECRYSTALLIZATIONPROCESS OF NICKEL BASE SINGLECRYSTAL SUPERALLOY". Acta Metallurgica Sinica 49, nr 5 (2013): 523. http://dx.doi.org/10.3724/sp.j.1037.2013.00036.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
42

Дорошенко, Олександр Іванович, Олена Вікторівна Романюк i Світлана Олександрівна Борисенко. "Physical base development for mathematical simulation of transmission process". Technology audit and production reserves 4, nr 1(24) (23.07.2015): 51. http://dx.doi.org/10.15587/2312-8372.2015.47770.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
43

Escalera, Juan A., Roque Saltarén, Manuel Ferre, Rafael Aracil i Cecilia E. García. "BASE MOLECULE DESIGN AND SIMULATION OF MODULAR ROBOT ROBMAT". IFAC Proceedings Volumes 38, nr 1 (2005): 25–30. http://dx.doi.org/10.3182/20050703-6-cz-1902.01275.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
44

JIMBO, Tomohiko, Kei MATSUOKA, Takashi FURUSAWA i Satoru YAMAMOTO. "Numerical Simulation of Supercritical Fluid base on Preconditioning Method". Proceedings of the National Symposium on Power and Energy Systems 2019.24 (2019): A113. http://dx.doi.org/10.1299/jsmepes.2019.24.a113.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
45

Bin Chen, Ronghua Zhong i Hans Vangheluwe. "Integrating Base Object Model Components into DEVS-based Simulation". Journal of Defense Modeling and Simulation: Applications, Methodology, Technology 7, nr 4 (23.04.2010): 241–56. http://dx.doi.org/10.1177/1548512910367632.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
46

Chang-Gyu Hwang, D. H. Navon i Ting-Wei Tang. "Monte Carlo simulation of the GaAs permeable base transistor". IEEE Transactions on Electron Devices 34, nr 2 (luty 1987): 154–59. http://dx.doi.org/10.1109/t-ed.1987.22901.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
47

Wiet, Gregory J., Donald L. Stredney, Roni Yagel i Dennis J. Sessanna. "USING ADVANCED SIMULATION TECHNOLOGY FOR CRANIAL BASE TUMOR EVALUATION". Otolaryngologic Clinics of North America 31, nr 2 (kwiecień 1998): 341–56. http://dx.doi.org/10.1016/s0030-6665(05)70053-0.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
48

Bazkiaei, Amirheshmat Khedmati, Kourosh Heidari Shirazi i Mohammad Shishesaz. "A framework for model base hyper-elastic material simulation". Journal of Rubber Research 23, nr 4 (8.10.2020): 287–99. http://dx.doi.org/10.1007/s42464-020-00057-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
49

Flores, D., P. Godignon, M. Vellvehí, J. Fernández, S. Hidalgo, J. Rebollo i J. Millán. "Numerical simulation of the insulated base MOS-controlled thyristor". Microelectronics Journal 27, nr 2-3 (marzec 1996): 177–80. http://dx.doi.org/10.1016/0026-2692(95)00086-0.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
50

Ohsasa, Kenichi. "Numerical simulation of solidification for aluminum-base multicomponent alloy". Journal of Phase Equilibria 22, nr 4 (sierpień 2001): 498–503. http://dx.doi.org/10.1361/105497101770333081.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii