Rozprawy doktorskie na temat „Shear Failure”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Shear Failure”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Nie, Xin. "Failure mechanism of rolling shear failure in cross-laminated timber". Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/55299.
Pełny tekst źródłaForestry, Faculty of
Graduate
Chana, Palvinder Singh. "Shear failure of reinforced concrete beams". Thesis, University College London (University of London), 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.282869.
Pełny tekst źródłaRaischel, Frank. "Fibre models for shear failure and plasticity". [S.l. : s.n.], 2007. http://nbn-resolving.de/urn:nbn:de:bsz:93-opus-29619.
Pełny tekst źródłaJohnsson, Helena. "Plug shear failure in nailed timber connections : avoiding brittle and promoting ductile failures /". Luleå : Univ, 2004. http://epubl.luth.se/1402-1544/2004/03.
Pełny tekst źródłaLi, Xu Dong. "Simulation of Progressive Shear Failure in Railway Foundation". Thesis, Université d'Ottawa / University of Ottawa, 2020. http://hdl.handle.net/10393/41498.
Pełny tekst źródłaZhang, Xuesong, i n/a. "Punching Shear Failure Analysis of Reinforced Concrete Flat Plates Using Simplified Ust Failure Criterion". Griffith University. School of Engineering, 2003. http://www4.gu.edu.au:8080/adt-root/public/adt-QGU20051104.153239.
Pełny tekst źródłaZhang, Xuesong. "Punching Shear Failure Analysis of Reinforced Concrete Flat Plates Using Simplified Ust Failure Criterion". Thesis, Griffith University, 2003. http://hdl.handle.net/10072/365777.
Pełny tekst źródłaThesis (Masters)
Master of Philosophy (MPhil)
School of Engineering
Full Text
Zhou, Guolin, i 周國林. "Complete stress-strain behavior for shear failure of rocks". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1999. http://hub.hku.hk/bib/B42575679.
Pełny tekst źródłaZhou, Guolin. "Complete stress-strain behavior for shear failure of rocks". Click to view the E-thesis via HKUTO, 1999. http://sunzi.lib.hku.hk/hkuto/record/B42575679.
Pełny tekst źródłaNazir, Shahid. "Studies on the failure of unreinforced masonry shear walls". Thesis, Queensland University of Technology, 2015. https://eprints.qut.edu.au/82792/1/Shahid_Nazir_Thesis.pdf.
Pełny tekst źródłaLee, Jaeman. "Flexural and Shear Failure Mechanisms of Precast/Prestressed Concrete Members". 京都大学 (Kyoto University), 2013. http://hdl.handle.net/2433/174917.
Pełny tekst źródłaBaptist, Olu. "Powder cohesion and stick-slip failure in a shear cell". Thesis, University of Surrey, 2007. http://epubs.surrey.ac.uk/843467/.
Pełny tekst źródłaBarsoum, Imad. "Ductile failure and rupture mechanisms in combined tension and shear". Licentiate thesis, Stockholm, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4064.
Pełny tekst źródłaDiangha, Maurice Nkinyam Boh. "Punching shear modes of failure in impacted reinforced concrete beams". Thesis, University of Sheffield, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245559.
Pełny tekst źródłaKuang, Jun Shang. "Punching shear failure of concrete slabs with compressive membrane action". Thesis, University of Cambridge, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240241.
Pełny tekst źródłaKaneko, Yoshio. "Modelling of shear-off failure of concrete : fracture mechanics approach". Thesis, Massachusetts Institute of Technology, 1992. http://hdl.handle.net/1721.1/13200.
Pełny tekst źródłaSalim, Wijaya. "Punching shear failure in reinforced concrete slabs with membrane restraint". Thesis, University of Bristol, 2006. http://hdl.handle.net/1983/e2a8f32a-0fc2-40ee-8183-a9100122e429.
Pełny tekst źródłaFan, Dongliang Fan. "Lap-shear test: from “Kendall’s steady peeling” to “catastrophic failure”". University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1523316028088973.
Pełny tekst źródłaOluwabusi, Oludare E. "Assessing the In-plane Shear Failure of GFRP Laminates and Sandwich Structures". University of Dayton / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1544528074090494.
Pełny tekst źródłaHayward, Benjamin James. "Investigation of road base shear strains using in-situ instrumentation". Thesis, University of Canterbury. Civil Engineering, 2006. http://hdl.handle.net/10092/1164.
Pełny tekst źródłaKara, Emre. "A Numerical Study On Block Shear Failure Of Steel Tension Members". Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12606359/index.pdf.
Pełny tekst źródłaPani´c, Nebojsa. "High strain rate-induced failure in steels at high shear strains". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0006/MQ45106.pdf.
Pełny tekst źródłaMinnaar, Karel. "Comparison and analysis of dynamic shear failure behavior of structural metals". Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/16340.
Pełny tekst źródłaKunieda, Minoru, Naoshi Ueda, Yoshihito Yamamoto, Hikaru Nakamura i Yasar Hanifi Gedik. "Effect of Stirrups on the Shear Failure Mechanism of Deep Beams". 日本コンクリート工学会, 2012. http://hdl.handle.net/2237/20960.
Pełny tekst źródłaBarragán, Bryan Erick. "Failure and toughness of steel fiber reinforced concrete under tension and shear". Doctoral thesis, Universitat Politècnica de Catalunya, 2002. http://hdl.handle.net/10803/5905.
Pełny tekst źródłaEl comportamiento a tracción uniaxial del hormigón reforzado con fibras de acero se caracteriza utilizando cilindros entallados, elaborados con hormigones de resistencia normal y alta, con y sin fibras de acero. La metodología se extiende también para testigos extraídos de elementos de mayor tamaño. Los resultados se utilizan para definir parámetros de tenacidad y resistencia equivalentes de post-pico utilizables para representar el comportamiento del material y para un posible diseño estructural. Además, se desarrolla un estudio paramétrico experimental, que considera diferentes variables del ensayo y forma de probetas, para definir una configuración confiable del ensayo. Se analizan los modos de rotura observados y se evalúa la respuesta tensión-ancho de fisura. Asimismo, se propone una relación tensión-apertura de fisura característica para el diseño y análisis estructural. El comportamiento a tracción uniaxial se compara también con el de flexión y tracción por compresión diametral.
La fractura por cortante se estudia a nivel material, en hormigones de resistencia normal y alta, con y sin fibras de acero, utilizando la configuración de cortante directo denominada push-off. Se analizan el modo de rotura y la respuesta tensión-desplazamiento. Además, se definen parámetros basados en la tenacidad y tensiones equivalentes de cortante para una posible utilización en el diseño estructural.
Con el fin de obtener resultados que validen la utilización de las fibras de acero como refuerzo de cortante y al mismo tiempo estudiar la fractura por cortante a nivel estructural, se han realizado ensayos a escala real sobre vigas de sección rectangular y en T. Se analizan las respuestas carga-flecha y carga-ancho de fisura de vigas rectangulares de hormigón reforzado con fibras de acero variando su altura y de vigas T variando las dimensiones del ala. Los resultados obtenidos experimentalmente se utilizan para verificar la aplicabilidad de los métodos de diseño existentes en el caso del hormigón reforzado con fibras de acero. Además, se presenta una propuesta para el diseño a cortante basada en la respuesta tensión-desplazamiento relativo obtenida a partir del ensayo push-off de cortante directo.
The thesis deals with the characterization of the failure of steel fiber reinforced concrete (SFRC) in tension and shear, on the material level, and the determination of parameters that represent the toughness in these two modes of failure. Tests have been performed on large-scale beams failing under shear failure, which have been analyzed using existing design code formulas. The toughness parameters determined from the material are used in the design against such failure.
The uniaxial tensile behavior of SFRC is characterized using notched cylinders of normal and high strength concretes, with and without steel fibers. The methodology is also extended to cores extracted from large elements. Results are used to define toughness parameters and equivalent post-peak strengths to be used for representing the material behavior and for possible structural design. Furthermore, a parametric study considering different test variables and specimen shape is carried out in order to define a reliable test configuration. The observed modes of failure are analyzed and the stress-crack width response is evaluated. Also, a characteristic stress-crack width response is proposed for structural analysis and design. The uniaxial tension behavior is also compared with that of flexural and splitting-tension.
The shear failure is studied using the direct shear push-off test configuration, in normal and high strength concretes with and without steel fibers. The mode of failure and the stress-slip and stress-crack opening responses are analyzed. Toughness parameters and equivalent shear strengths based on the test results are defined for structural design.
In order to provide results for validating the use of steel fibers as shear reinforcement and for studying shear failure at the structural level, full-scale tests on rectangular and T-beams were performed. The load-deflection and load-crack width responses are analyzed and compared with results of plain concrete beam tests. The experimentally-obtained results are used to evaluate the applicability of existing design methods for steel fiber reinforced concrete. Furthermore, a proposal for shear design based on the shear stress versus slip relationship from the push-off shear test is presented.
Swaminathan, Palanivel. "Numerical study of the occurrence of adiabatic shear banding without material failure". Thesis, Wichita State University, 2010. http://hdl.handle.net/10057/3750.
Pełny tekst źródłaThesis (M.S.)--Wichita State University, College of Engineering, Dept. of Industrial and Manufacturing Engineering.
Chui, Clarence 1970. "Interface failure under local normal and shear stress conditions : initiation and propagation". Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/11779.
Pełny tekst źródłaSarzynski, Melanie Diane. "Carbon foam characterization: sandwich flexure, tensile and shear response". Thesis, Texas A&M University, 2003. http://hdl.handle.net/1969.1/55.
Pełny tekst źródłaO'Connor, Bernard. "High strain deformation and ultimate failure of HIPS and ABS polymers". Thesis, Cranfield University, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245417.
Pełny tekst źródłaUmberger, Pierce David. "Modeling the High Strain Rate Tensile Response and Shear Failure of Thermoplastic Composites". Diss., Virginia Tech, 2013. http://hdl.handle.net/10919/23846.
Pełny tekst źródłaPh. D.
Ngekpe, B. E. "Punching shear failure of reinforced concrete flat slabs supported on steel edge column". Thesis, Coventry University, 2016. http://curve.coventry.ac.uk/open/items/5f0f9112-1838-448f-a245-cacc0bc3a9f5/1.
Pełny tekst źródłaKaraca, Erdem 1976. "FRP strengthening of RC beams in flexure and shear : failure modes and design". Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/84785.
Pełny tekst źródłaPetkune, Natalja. "Investigating behaviour and failure modes of FRP and hybrid steel/FRP shear walls". Thesis, Kingston University, 2016. http://eprints.kingston.ac.uk/37873/.
Pełny tekst źródłaWilhelm, Maximilian Felix, Uwe Füssel, Thomas Richter, Matthias Riemer i Martin Foerster. "Analysis of the shear-out failure mode for CFRP connections joined by forming". Sage, 2015. https://tud.qucosa.de/id/qucosa%3A35782.
Pełny tekst źródłaDahlem, Emilie. "Characterisation of refractory failure under combined hydrostatic and shear loading at elevated temperatures". Limoges, 2011. https://aurore.unilim.fr/theses/nxfile/default/dfd9d04c-9d0f-4489-a364-f7ffe7a40e0c/blobholder:0/2011LIMO4051.pdf.
Pełny tekst źródłaDans de nombreuses applications industrielles, les matériaux réfractaires subissent des contraintes combinées de compression et de cisaillement pouvant entrainer la rupture du matériau. La prédiction de la rupture du revêtement réfractaire nécessite alors la connaissance du comportement multiaxial des matériaux réfractaires dans ces conditions d’utilisation. Afin de tenir compte de ces aspects dans la modélisation numérique, le critère de Drucker-Prager est souvent utilisé pour décrire le comportement mécanique des matériaux granulaires. En effet, le critère de Drucker-Prager correspond à une approche simple qui permet de décrire la dépendance de la contrainte à rupture en cisaillement en fonction de la pression hydrostatique. Néanmoins, l’utilisation de ce critère nécessite la connaissance de deux paramètres essentiels qui doivent être déterminés expérimentalement : la cohésion (d) traduisant la contrainte à la rupture en cisaillement sans pression hydrostatique appliquée, et l’angle de frottement (β) traduisant l’évolution de cette contrainte à rupture lorsque la pression hydrostatique augmente. De nombreux travaux expérimentaux sur ce type de caractérisation sont disponibles dans la littérature, en particulier dans le domaine de la géologie ou du génie civil. Mais, malheureusement, tous ces travaux traitent de techniques de caractérisation fonctionnant à température ambiante. Dans notre cas, la cohésion et l’angle de frottement doivent aussi être déterminés à haute température (jusqu’à 1500°C). La transposition à haute température des dispositifs développés pour des mesures à température ambiante, est tout simplement impossible. Ce travail propose donc une nouvelle approche pour réaliser de telles mesures dans le cas des matériaux réfractaires
Haidar, Mohamed. "Modelling of failure mechanisms for corrugated board". Thesis, KTH, Hållfasthetslära (Inst.), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-176010.
Pełny tekst źródłaNedele, Martin Rolf. "Micromechanical modelling of unidirectional composites subjected to external and internal loadings". Thesis, University of Bristol, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336828.
Pełny tekst źródłaJunaideen, Sainulabdeen Mohamed. "Failure of saturated sandy soils due to increase in pore water pressure". Thesis, Click to view the E-thesis via HKUTO, 2005. http://sunzi.lib.hku.hk/hkuto/record/B30708540.
Pełny tekst źródłaBell, A. P. "Finite element analysis of shear band failure with particular reference to circular plate impact". Thesis, City University London, 1989. http://openaccess.city.ac.uk/7410/.
Pełny tekst źródłaChen, Yiyu. "Non-linear finite element analysis of certain shear failure mechanisms in reinforced concrete beams". Thesis, Heriot-Watt University, 2007. http://hdl.handle.net/10399/68.
Pełny tekst źródłaWilliams, Scott A. "Numerical Analysis of Reinforced Masonry Shear Walls Using the Nonlinear Truss Approach". Thesis, Virginia Tech, 2014. http://hdl.handle.net/10919/25219.
Pełny tekst źródłaMaster of Science
Pei, Shuangxi. "An investigation into the punching shear failure in R.C. waffle slabs subjected to concentrated load". Thesis, University of Abertay Dundee, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.240614.
Pełny tekst źródłaAliamiri, Sara. "Prediction of premature failure load in FRP or steel plated RC beams". Thesis, Loughborough University, 2013. https://dspace.lboro.ac.uk/2134/13631.
Pełny tekst źródłaIsabell, Eriksson, i Niklas Karlsson. "Non-Linear Assessment of a Concrete Bridge Slab Loaded to Failure". Thesis, KTH, Betongbyggnad, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-188900.
Pełny tekst źródłaDenna uppsats behandlar en utredning gällande brottet i plattan på Gruvvägsbron, som var resultatet av det fullskaletest som bron utsattes för innan rivning. Med hjälp av den icke-linjära finita element-programvaran ATENA 3D skapades en modell avbron, med syfte att på ett realistiskt sätt försöka återskapa experimentet och fånga brons verkliga beteende. Detta för att således kunna dra slutsatser angående brottets natur. Den första delen av denna uppsats innehåller en sammanfattning av en utförd litteraturstudie, som ämnar ge en ökad förståelse angående fenomenen skjuvning och genomstansning, tillsammans med olika brottmekanismer relaterade till dessa. Vidare har brons motstånd mot skjuv- och genomstansningbrott beräknats enligt rådande normer. En parameterstudie utfördes på modellen, då den ursprungligen uppvisade ett överstyvt beteende. Syftet med detta var att studera nyckelparametrars påverkan på analysens resultat, och eventuellt komma närmare den verkliga brottlasten i experimentet. Av de studerade parametrarna observerades att en samtida reduktion av draghållfasthet och brottenergi, samt ett lågt värde på den så kallade "fixedcrack"-koefficienten gav störst inverkan på resultatet. Vidare observerades att brottets lokalisering och brottlasten var beroende av hur lasten påfördes modellen, dvs genom last- eller deformationsstyrning. Den slutgiltiga modellen gick till brott vid en last som översteg den verkliga brottlasten med 10.5%. Brottet som skedde var i samtliga analyser resultatet av en skjuvspricka som sträckte sig från kanten av lastplattan, genom plattan, ner till mötet mellan platta och balk. Detta indikerar att den typ av brott som skedde var ett primärt skjuvbrott med en sekundär stanseffekt. Lastvärdena beräknade enligt rådande normer tycks vara för konservativa, om jämförelse görs med lasten som uppnåddes i experimentet. Detta visar på svårigheten i att bedöma den inre kraftspridningen i plattor, och även dess skjuvbärande bredd, då analysen visade att denna var betydligt större än vad som ges i koden.
Love, Bryan Matthew. "Multiscale Analysis of Failure in Heterogeneous Solids Under Dynamic Loading". Diss., Virginia Tech, 2004. http://hdl.handle.net/10919/29650.
Pełny tekst źródłaPh. D.
Ekesiöö, Anton, i Andreas Ekhamre. "Safety formats for non-linear finite element analyses of reinforced concrete beams loaded to shear failure". Thesis, KTH, Betongbyggnad, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-231087.
Pełny tekst źródłaOtaki, Takeshi. "SIZE EFFECTS IN SHEAR FAILURE OF REINFORCED CONCRETE BRIDGE COLUMNS - FULL SCALE TEST AND ANALYTICAL EVALUATION". Kyoto University, 2001. http://hdl.handle.net/2433/150668.
Pełny tekst źródłaSaum, Keith L. "Targeting Endothelial Kruppel-like Factor 2 (KLF2) in Arteriovenous Fistula Maturation Failure". University of Cincinnati / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1530269382206163.
Pełny tekst źródłaLear, Matthew Houck. "Numerical Simulation of Adiabatic Shear Bands and Crack Propagation in Thermoviscoplastic Materials". Diss., Virginia Tech, 2003. http://hdl.handle.net/10919/27196.
Pełny tekst źródłaPh. D.
Herrero, Javier. "Buckling, postbuckling and progressive failure analysis of hybrid composite shear webs using a continuum damage mechanics model". Diss., Wichita State University, 2007. http://hdl.handle.net/10057/1488.
Pełny tekst źródłaThesis (Ph.D.)--Wichita State University, College of Engineering, Dept. of Aerospace Engineering
"December 2007."