Gotowa bibliografia na temat „Sensors and actuators placement”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Sensors and actuators placement”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Sensors and actuators placement"
CHEN, KEVIN K., i CLARENCE W. ROWLEY. "H2 optimal actuator and sensor placement in the linearised complex Ginzburg–Landau system". Journal of Fluid Mechanics 681 (20.06.2011): 241–60. http://dx.doi.org/10.1017/jfm.2011.195.
Pełny tekst źródłaŠolek, Peter, i Marek Maták. "An Active Control of the Thin-Walled Mechanical Systems". Applied Mechanics and Materials 611 (sierpień 2014): 22–31. http://dx.doi.org/10.4028/www.scientific.net/amm.611.22.
Pełny tekst źródłaMersch, Johannes, Najmeh Keshtkar, Henriette Grellmann, Carlos Alberto Gomez Cuaran, Mathis Bruns, Andreas Nocke, Chokri Cherif, Klaus Röbenack i Gerald Gerlach. "Integrated Temperature and Position Sensors in a Shape-Memory Driven Soft Actuator for Closed-Loop Control". Materials 15, nr 2 (10.01.2022): 520. http://dx.doi.org/10.3390/ma15020520.
Pełny tekst źródłaSeyed Sakha, Masoud, i Hamid Reza Shaker. "Optimal sensors and actuators placement for large-scale unstable systems via restricted genetic algorithm". Engineering Computations 34, nr 8 (6.11.2017): 2582–97. http://dx.doi.org/10.1108/ec-04-2016-0138.
Pełny tekst źródłaJohnson, Marty E., Luiz P. Nascimento, Mary Kasarda i Chris R. Fuller. "The Effect of Actuator and Sensor Placement on the Active Control of Rotor Unbalance". Journal of Vibration and Acoustics 125, nr 3 (18.06.2003): 365–73. http://dx.doi.org/10.1115/1.1569946.
Pełny tekst źródłaSoman, Rohan, Kaleeswaran Balasubramaniam, Ali Golestani, Michał Karpiński, Pawel Malinowski i Wieslaw Ostachowicz. "Actuator placement optimization for guided waves based structural health monitoring using fibre Bragg grating sensors". Smart Materials and Structures 30, nr 12 (1.11.2021): 125011. http://dx.doi.org/10.1088/1361-665x/ac31c4.
Pełny tekst źródłaHeck, L. P., J. A. Olkin i K. Naghshineh. "Transducer Placement for Broadband Active Vibration Control Using a Novel Multidimensional QR Factorization". Journal of Vibration and Acoustics 120, nr 3 (1.07.1998): 663–70. http://dx.doi.org/10.1115/1.2893881.
Pełny tekst źródłaGAWRONSKI, W. "SIMULTANEOUS PLACEMENT OF ACTUATORS AND SENSORS". Journal of Sound and Vibration 228, nr 4 (grudzień 1999): 915–22. http://dx.doi.org/10.1006/jsvi.1999.2466.
Pełny tekst źródłaNandy, Animesh, Debabrata Chakraborty i Mahesh S. Shah. "Optimal Sensors/Actuators Placement in Smart Structure Using Island Model Parallel Genetic Algorithm". International Journal of Computational Methods 16, nr 06 (27.05.2019): 1840018. http://dx.doi.org/10.1142/s0219876218400182.
Pełny tekst źródłaHuang, Xiu Feng, Ming Hong i Hong Yu Cui. "The Optimal Location of Piezoelectric Sensor/Actuator Based on Adaptive Genetic Algorithm". Applied Mechanics and Materials 635-637 (wrzesień 2014): 799–804. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.799.
Pełny tekst źródłaRozprawy doktorskie na temat "Sensors and actuators placement"
Szczepanski, Robert Walter. "Optimal placement of actuators and sensors for vibration control using genetic algorithms". Thesis, University of Newcastle Upon Tyne, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341754.
Pełny tekst źródłaPotami, Raffaele. "Optimal sensor/actuator placement and switching schemes for control of flexible structures". Worcester, Mass. : Worcester Polytechnic Institute, 2008. http://www.wpi.edu/Pubs/ETD/Available/etd-042808-124333/.
Pełny tekst źródłaKeywords: hybrid system, PZT actuators, performance enchancement, actuator placement, actuator switching. Includes bibliographical references (leaves 102-108).
Polyzos, Dimitrios. ""Measuring System Properties & Structured Diagnostics for the Selection of Sensors, Actuators Placement & Eigenstructure Assignment"". Thesis, City University London, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.524712.
Pełny tekst źródłaSuwit, Pulthasthan Information Technology & Electrical Engineering Australian Defence Force Academy UNSW. "Optimal placement of sensor and actuator for sound-structure interaction system". Awarded by:University of New South Wales - Australian Defence Force Academy. School of Information Technology and Electrical Engineering, 2006. http://handle.unsw.edu.au/1959.4/38741.
Pełny tekst źródłaJha, Akhilesh K. "Vibration Analysis and Control of an Inflatable Toroidal Satellite Component Using Piezoelectric Actuators and Sensors". Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/28243.
Pełny tekst źródłaPh. D.
MURUGAN, JAYA MAHESH. "Vibration monitoring and control of industrial structures". Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2858351.
Pełny tekst źródłaBrakna, Mohammed. "Sensor and actuator optimal location for dynamic controller design. Application to active vibration reduction in a galvanizing process". Electronic Thesis or Diss., Université de Lorraine, 2023. https://docnum.univ-lorraine.fr/ulprive/DDOC_T_2023_0152_BRAKNA.pdf.
Pełny tekst źródłaThe aims of the present PhD thesis are to determine a model that is both sufficiently accurate and numerically exploitable to propose optimal placement of sensors and actuators for active vibration control in a galvanizing line. A continuous hot-dip galvanizing process consists in covering a metal (here: a steel band) by a protective layer of zinc which avoids the corrosion due to the air. The thickness of this layer must be constant to guarantee the mechanical properties and surface condition of the product. In a galvanizing line, the moving steel strip is heated and then immersed in a liquid zinc bath before being wiped out by nozzles projecting air. The air flow, as well as the rotation of the driving rolls, among other things, creates vibrations affecting the wiping process and thus the regularity of the zinc deposit. Active control is therefore necessary, for example by means of electromagnets placed on either side of the moving steel strip. In a first step, a behavioral model of the steel strip taking into account the presence and propagation of vibrations was obtained by spatial discretization of a partial differential equation. This state space model was validated in simulation and experimentally on a pilot galvanizing line of ArcelorMittal Research in Maizières-lès-Metz. Once this model is established, the objective of the study is to find the optimal placement of sensors, to measure the vibrations of the strip as efficiently as possible, but also of actuators to minimize the amplitude of these vibrations by an appropriate control law. These problems of optimal placement are at the heart of the issues of active vibration control and are found in many fields of application. An optimal placement method based on Gramian maximization has been proposed in order to reduce the impact of disturbances on the system. Different control strategies have been considered such as (i) observed state feedback based on Kalman filter and LQ regulator; and (ii) extended observed state feedback to improve the results by also taking into account the disturbance estimation provided by a PI (proportional-integral) observer. Simulation and experimental results illustrate the thesis contributions
Perini, Efrain Araujo [UNESP]. "Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward". Universidade Estadual Paulista (UNESP), 2009. http://hdl.handle.net/11449/94510.
Pełny tekst źródłaFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Este trabalho apresenta o desenvolvimento de uma análise teórica do desempenho de um sistema de controle ativo utilizando mancais magnéticos como atuadores de não-contato para a redução de vibrações em rotores. São analisados três modelos de rotores, sendo que em um deles aplica-se apenas o controle feedback e os outros são suportados apenas por mancais magnéticos, os quais também são os atuadores do controlador. Assim, Luna arquitetura de controle tipo feedforward é empregada sobreposta ao sistema de controle feedback dos atuadores nestes dois modelos, sendo urna análise realizada em relação ao desempenho do sistema de controle quanto às diferentes geometrias de distribuição de massa acopladas ao eixo do rotor. O enfoque principal deste trabalho é voltado para a análise do desempenho do sistema de controle em função da posição e quantidade dos sensores de erro (onde se deseja minimizar as vibrações) em relação à posição dos atuadores e das forças de excitação. As excitações são do tipo síncronas e sub-síncronas que normalmente aparecem em rotores com elevadas velocidades de rotação, como as turbomáquinas. Também é realizada urna análise das forças de controle necessárias a serem aplicadas pelos atuadores para se obter urna redução dos níveis de vibração do rotor na posição dos sensores de erro do sistema feedforward. A análise é executada empregando modelos de rotores desenvolvidos pelo método da matriz de impedância. Esta pesquisa também apresenta Luna aplicação da técnica de controle Feedforward em acústica, que realiza a depuração da voz para comunicação em ambientes ruidosos.
This research work brings a theoretical analysis of a control system performance that uses magnetic bearings as non-contact actuators to reduce rotor vibrations. It is analyzed three rotor models, in which one of them operates under the feedback control only. The other models are supported by magnetic bearings only, which also are the controller system actuators. Thus, a feedforward control scheme is applied over the feedback control inherent to the AMB control circuit. The analysis is carried out over these two last models regarding to the control performance for different geometry of mass distribution along the rotor. The focus of this work is to analyze the controller performance according to the sensor quantity and placement (where the vibrations are desired to be minimized) regarding to the actuator position and to the exciting forces. The subsynchronous and synchronous excitations are considered here since they frequently occur in high rotating speed rotors, as in the turbomachinery scenario. Also, the control force required by the actuators is monitored according to the sensors placement to reduce the local vibrations level and the analysis was carried out using the impedance matrix rotor modeling. Further, this work brings a modeling and an application of the feedforward active control scheme in the acoustics field used for voice extraction for communication in noisy environments.
Perini, Efrain Araujo. "Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward /". Ilha Solteira : [s.n.], 2009. http://hdl.handle.net/11449/94510.
Pełny tekst źródłaAbstract: This research work brings a theoretical analysis of a control system performance that uses magnetic bearings as non-contact actuators to reduce rotor vibrations. It is analyzed three rotor models, in which one of them operates under the feedback control only. The other models are supported by magnetic bearings only, which also are the controller system actuators. Thus, a feedforward control scheme is applied over the feedback control inherent to the AMB control circuit. The analysis is carried out over these two last models regarding to the control performance for different geometry of mass distribution along the rotor. The focus of this work is to analyze the controller performance according to the sensor quantity and placement (where the vibrations are desired to be minimized) regarding to the actuator position and to the exciting forces. The subsynchronous and synchronous excitations are considered here since they frequently occur in high rotating speed rotors, as in the turbomachinery scenario. Also, the control force required by the actuators is monitored according to the sensors placement to reduce the local vibrations level and the analysis was carried out using the impedance matrix rotor modeling. Further, this work brings a modeling and an application of the feedforward active control scheme in the acoustics field used for voice extraction for communication in noisy environments.
Orientador: Luiz de Paula do Nascimento
Coorientador: Vicente Lopes Junior
Banca: Gilberto Pechoto de Melo
Banca: Kátia Luchese Cavalca Dedini
Mestre
Mitwalli, Ahmed Hamdi. "Polymer gel actuators and sensors". Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9969.
Pełny tekst źródłaIncludes bibliographical references (p. [351]-361).
by Ahmed Hamdi Mitwalli.
Sc.D.
Książki na temat "Sensors and actuators placement"
K, Kincaid Rex, i Langley Research Center, red. Optimization strategies for sensor and actuator placement. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.
Znajdź pełny tekst źródłaK, Kincaid Rex, i Langley Research Center, red. Optimization strategies for sensor and actuator placement. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1999.
Znajdź pełny tekst źródłaCenter, Langley Research, red. Optimal control of unsteady stokes flow around a cylinder and the sensor/actuator placement problem. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.
Znajdź pełny tekst źródłaCenter, Langley Research, red. Optimal control of unsteady stokes flow around a cylinder and the sensor/actuator placement problem. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1998.
Znajdź pełny tekst źródłaOsada, Yoshihito. Polymer Sensors and Actuators. Berlin, Heidelberg: Springer Berlin Heidelberg, 2000.
Znajdź pełny tekst źródłaVigna, Benedetto, Paolo Ferrari, Flavio Francesco Villa, Ernesto Lasalandra i Sarah Zerbini, red. Silicon Sensors and Actuators. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-80135-9.
Pełny tekst źródłaBusch-Vishniac, Ilene J. Electromechanical Sensors and Actuators. New York, NY: Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4612-1434-2.
Pełny tekst źródłaBrauer, John R. Magnetic Actuators and Sensors. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2006. http://dx.doi.org/10.1002/0471777714.
Pełny tekst źródłaBrauer, John R. Magnetic Actuators and Sensors. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118779262.
Pełny tekst źródłaRupitsch, Stefan Johann. Piezoelectric Sensors and Actuators. Berlin, Heidelberg: Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-57534-5.
Pełny tekst źródłaCzęści książek na temat "Sensors and actuators placement"
Khapalov, Alexander Y. "Degenerate Sensors in Source Localization and Sensor Placement Problems". W Mobile Point Sensors and Actuators in the Controllability Theory of Partial Differential Equations, 123–43. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60414-5_8.
Pełny tekst źródłaGawronski, Wodek K. "Actuator and Sensor Placement". W Dynamics and Control of Structures, 100–128. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-0-387-21855-7_7.
Pełny tekst źródłaLi, Xu, Amiya Nayak, David Simplot-Ryl i Ivan Stojmenovic. "Sensor Placement in Sensor and Actuator Networks". W Wireless Sensor and Actuator Networks, 263–94. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470570517.ch10.
Pełny tekst źródłaGawronski, Wodek. "Balanced sensor and actuator placement". W Balanced Control of Flexible Structures, 107–36. Berlin, Heidelberg: Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/3540760172_5.
Pełny tekst źródłaUsher, M. J., i D. A. Keating. "Actuators". W Sensors and Transducers, 131–46. London: Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13345-1_9.
Pełny tekst źródłaKatebi, Reza, Michael A. Johnson i Jacqueline Wilkie. "Sensors and Actuators". W Advances in Industrial Control, 144–65. London: Springer London, 1999. http://dx.doi.org/10.1007/978-1-4471-0423-0_6.
Pełny tekst źródłaSciavicco, Lorenzo, i Bruno Siciliano. "Actuators and Sensors". W Modelling and Control of Robot Manipulators, 295–320. London: Springer London, 2000. http://dx.doi.org/10.1007/978-1-4471-0449-0_8.
Pełny tekst źródłaAamo, Ole Morten, i Miroslav Krstić. "Sensors and Actuators". W Flow Control by Feedback, 179–83. London: Springer London, 2003. http://dx.doi.org/10.1007/978-1-4471-3805-1_6.
Pełny tekst źródłaMarkley, F. Landis, i John L. Crassidis. "Sensors and Actuators". W Fundamentals of Spacecraft Attitude Determination and Control, 123–81. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-0802-8_4.
Pełny tekst źródłaGenta, Giancarlo. "Actuators and Sensors". W Introduction to the Mechanics of Space Robots, 427–82. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-1796-1_7.
Pełny tekst źródłaStreszczenia konferencji na temat "Sensors and actuators placement"
Kameyama, Masaki, i Hisao Fukunaga. "Optimal Placement of Sensors and Actuators for Modal Measurement/Control of CFRP Laminated Plates". W ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2008. http://dx.doi.org/10.1115/smasis2008-416.
Pełny tekst źródłaSpäh, Britta, Rudolf Sebastian Schittenhelm i Stephan Rinderknecht. "Optimal Sensor and Actuator Placement for Active Vibration Control Systems". W ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ncad2012-0982.
Pełny tekst źródłaHanagud, S., C. C. Won i M. W. Obal. "Optimal Placement of Piezoceramic Sensors and Actuators". W 1988 American Control Conference. IEEE, 1988. http://dx.doi.org/10.23919/acc.1988.4790034.
Pełny tekst źródłaTrease, Brian, i Sridhar Kota. "Topology Synthesis of Compliant Systems With Embedded Actuators and Sensors". W ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49688.
Pełny tekst źródłaAl-Masoud, Nidal, i Tarunraj Singh. "Optimal Actuator/Sensor Placement for Control of Combustion Instabilities". W ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/dsc-24562.
Pełny tekst źródłaAlnuaimi, Mohammed, Abdulaziz BuAbdulla, Tarcísio Silva, Sumaya Altamimi, Dong-Wook Lee i Mohamed Al Teneiji. "Active Vibration Control of Piezoelectric Beam Using the PID Controller". W ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-70960.
Pełny tekst źródłaGabbert, U., I. Schulz i C. T. Weber. "Actuator Placement in Smart Structures by Discrete-Continuous Optimization". W ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-3937.
Pełny tekst źródłaTrease, Brian P., i Sridhar Kota. "Synthesis of Adaptive and Controllable Compliant Systems With Embedded Actuators and Sensors". W ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99266.
Pełny tekst źródłaShelley, Franz J., i William W. Clark. "Active Mode Localization in Distributed Parameter Systems With Consideration of Limited Actuator Placement". W ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0575.
Pełny tekst źródłaSEPULVEDA, A., i L. SCHMIT. "Optimal Placement of Actuators and Sensors in Control Augmented Structural Optimization". W 31st Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-1055.
Pełny tekst źródłaRaporty organizacyjne na temat "Sensors and actuators placement"
Almeida, Oscar J., Brian G. Dixon, Jill H. Hardin, John P. Sanford i Myles Walsh. High Temperature Smart Sensors and Actuators. Fort Belvoir, VA: Defense Technical Information Center, sierpień 1992. http://dx.doi.org/10.21236/ada256985.
Pełny tekst źródłaKrulewich, D. A. Handbook of actuators and edge alignment sensors. Office of Scientific and Technical Information (OSTI), listopad 1992. http://dx.doi.org/10.2172/6788910.
Pełny tekst źródłaMATERIALS SYSTEMS INC CONCORD MA. Cost-Effective Method for Synthesizing Innovative Transducer Materials for Sensors and Actuators. Fort Belvoir, VA: Defense Technical Information Center, czerwiec 1994. http://dx.doi.org/10.21236/ada282339.
Pełny tekst źródłaTed Quinn i Jerry Mauck. Digial Technology Qualification Task 2 - Suitability of Digital Alternatives to Analog Sensors and Actuators. Office of Scientific and Technical Information (OSTI), wrzesień 2012. http://dx.doi.org/10.2172/1057681.
Pełny tekst źródłaCline, Joseph I. Surface Absorption Polarization Sensors (SAPS), Final Technical Report, Laser Probing of Immobilized SAPS Actuators Component. Office of Scientific and Technical Information (OSTI), kwiecień 2010. http://dx.doi.org/10.2172/977056.
Pełny tekst źródłaBeshouri, Greg. PR-309-14212-R01 Field Demonstration of Fully Integrated NSCR System. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), styczeń 2019. http://dx.doi.org/10.55274/r0011545.
Pełny tekst źródłaRatmanski, Kiril, i Sergey Vecherin. Resilience in distributed sensor networks. Engineer Research and Development Center (U.S.), październik 2022. http://dx.doi.org/10.21079/11681/45680.
Pełny tekst źródłaBeshouri. PR-309-08208-R01 A Survey of Diagnostics Techniques for Compressor Engines. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), wrzesień 2009. http://dx.doi.org/10.55274/r0010730.
Pełny tekst źródłaDasberg, Shmuel, Jan W. Hopmans, Larry J. Schwankl i Dani Or. Drip Irrigation Management by TDR Monitoring of Soil Water and Solute Distribution. United States Department of Agriculture, sierpień 1993. http://dx.doi.org/10.32747/1993.7568095.bard.
Pełny tekst źródłaTarko, Andrew P., Mario A. Romero, Vamsi Krishna Bandaru i Cristhian Lizarazo. TScan–Stationary LiDAR for Traffic and Safety Applications: Vehicle Interpretation and Tracking. Purdue University, 2022. http://dx.doi.org/10.5703/1288284317402.
Pełny tekst źródła