Gotowa bibliografia na temat „Scanner mobile”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Spis treści
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Scanner mobile”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Scanner mobile"
Anshari, Muhammad, Mitra istiar Wardhana i Dhara Alim Cendekia. "Visual Login Fingerprints Scanner Aplikasi Mobile Banking (BRImo, Jenius, BNI Mobile Banking) berdasarkan Model Kait Nir Eyal". JoLLA: Journal of Language, Literature, and Arts 3, nr 8 (31.08.2023): 1198–216. http://dx.doi.org/10.17977/um064v3i82023p1198-1216.
Pełny tekst źródłaMezian, c., Bruno Vallet, Bahman Soheilian i Nicolas Paparoditis. "UNCERTAINTY PROPAGATION FOR TERRESTRIAL MOBILE LASER SCANNER". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B3 (9.06.2016): 331–35. http://dx.doi.org/10.5194/isprs-archives-xli-b3-331-2016.
Pełny tekst źródłaMezian, c., Bruno Vallet, Bahman Soheilian i Nicolas Paparoditis. "UNCERTAINTY PROPAGATION FOR TERRESTRIAL MOBILE LASER SCANNER". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B3 (9.06.2016): 331–35. http://dx.doi.org/10.5194/isprsarchives-xli-b3-331-2016.
Pełny tekst źródłaJing, H., N. Slatcher, X. Meng i G. Hunter. "MONITORING CAPABILITIES OF A MOBILE MAPPING SYSTEM BASED ON NAVIGATION QUALITIES". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B1 (6.06.2016): 625–31. http://dx.doi.org/10.5194/isprs-archives-xli-b1-625-2016.
Pełny tekst źródłaJing, H., N. Slatcher, X. Meng i G. Hunter. "MONITORING CAPABILITIES OF A MOBILE MAPPING SYSTEM BASED ON NAVIGATION QUALITIES". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLI-B1 (6.06.2016): 625–31. http://dx.doi.org/10.5194/isprsarchives-xli-b1-625-2016.
Pełny tekst źródłaRahok, Sam Ann, Hirohisa Oneda, Akio Tanaka i Koichi Ozaki. "A Robust NavigationMethod for Mobile Robots in Real-World Environments". Journal of Robotics and Mechatronics 26, nr 2 (20.04.2014): 177–84. http://dx.doi.org/10.20965/jrm.2014.p0177.
Pełny tekst źródłaLu, Yaoqing, Kangfu Liu i Tao Wu. "Dual-Axis MEMS Resonant Scanner Using 128∘Y Lithium Niobate Thin-Film". Acoustics 4, nr 2 (1.04.2022): 313–28. http://dx.doi.org/10.3390/acoustics4020019.
Pełny tekst źródłaPermana, Indra Surya, Taufik Hidayat i Rahutomo Mahardiko. "MOBILE SCANNER ADOPTION ANALYSIS BETWEEN EMPLOYMENT AND EDUCATIONAL BACKGROUND – AN ANALYSIS OF LOGISTIC REGRESSION". TEKNOKOM 4, nr 2 (11.06.2021): 37–42. http://dx.doi.org/10.31943/teknokom.v4i2.56.
Pełny tekst źródłaKaijaluoto, R., i A. Hyyppä. "PRECISE INDOOR LOCALIZATION FOR MOBILE LASER SCANNER". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XL-4/W5 (11.05.2015): 1–6. http://dx.doi.org/10.5194/isprsarchives-xl-4-w5-1-2015.
Pełny tekst źródłaسامي حلواني، وسارودين كاري, سامي حلواني، وسارودين كاري. "Mobile ECG Scanner Using Smartphone". journal of king abdulaziz university computing and information technology sciences 1, nr 1 (3.01.2012): 85–96. http://dx.doi.org/10.4197/comp.1-1.4.
Pełny tekst źródłaRozprawy doktorskie na temat "Scanner mobile"
Nalani, Hetti Arachchige. "Automatic Reconstruction of Urban Objects from Mobile Laser Scanner Data". Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-159872.
Pełny tekst źródłaUp-to-date 3D urban models are becoming increasingly important in various urban application areas, such as urban planning, virtual tourism, and navigation systems. Many of these applications often demand the modelling of 3D buildings, enriched with façade information, and also single trees among other urban objects. Nowadays, Mobile Laser Scanning (MLS) technique is being progressively used to capture objects in urban settings, thus becoming a leading data source for the modelling of these two urban objects. The 3D point clouds of urban scenes consist of large amounts of data representing numerous objects with significant size variability, complex and incomplete structures, and holes (noise and data gaps) or variable point densities. For this reason, novel strategies on processing of mobile laser scanning point clouds, in terms of the extraction and modelling of salient façade structures and trees, are of vital importance. The present study proposes two new methods for the reconstruction of building façades and the extraction of trees from MLS point clouds. The first method aims at the reconstruction of building façades with explicit semantic information such as windows, doors and balconies. It runs automatically during all processing steps. For this purpose, several algorithms are introduced based on the general knowledge on the geometric shape and structural arrangement of façade features. The initial classification has been performed using a local height histogram analysis together with a planar growing method, which allows for classifying points as object and ground points. The point cloud that has been labelled as object points is segmented into planar surfaces that could be regarded as the main entity in the feature recognition process. Knowledge of the building structure is used to define rules and constraints, which provide essential guidance for recognizing façade features and reconstructing their geometric models. In order to recognise features on a wall such as windows and doors, a hole-based method is implemented. Some holes that resulted from occlusion could subsequently be eliminated by means of a new rule-based algorithm. Boundary segments of a feature are connected into a polygon representing the geometric model by introducing a primitive shape based method, in which topological relations are analysed taking into account the prior knowledge about the primitive shapes. Possible outlines are determined from the edge points detected from the angle-based method. The repetitive patterns and similarities are exploited to rectify geometrical and topological inaccuracies of the reconstructed models. Apart from developing the 3D façade model reconstruction scheme, the research focuses on individual tree segmentation and derivation of attributes of urban trees. The second method aims at extracting individual trees from the remaining point clouds. Knowledge about trees specially pertaining to urban areas is used in the process of tree extraction. An innovative shape based approach is developed to transfer this knowledge to machine language. The usage of principal direction for identifying stems is introduced, which consists of searching point segments representing a tree stem. The output of the algorithm is, segmented individual trees that can be used to derive accurate information about the size and locations of each individual tree. The reliability of the two methods is verified against three different data sets obtained from different laser scanner systems. The results of both methods are quantitatively evaluated using a set of measures pertaining to the quality of the façade reconstruction and tree extraction. The performance of the developed algorithms referring to the façade reconstruction, tree stem detection and the delineation of individual tree crowns as well as their limitations are discussed. The results show that MLS point clouds are suited to document urban objects rich in details. From the obtained results, accurate measurements of the most important attributes relevant to the both objects (building façades and trees), such as window height and width, area, stem diameter, tree height, and crown area are obtained acceptably. The entire approach is suitable for the reconstruction of building façades and for the extracting trees correctly from other various urban objects, especially pole-like objects. Therefore, both methods are feasible to cope with data of heterogeneous quality. In addition, they provide flexible frameworks, from which many extensions can be envisioned
Yasser, Almodhi. "Classifying Receipts and Invoices in Visma Mobile Scanner". Thesis, Linnéuniversitetet, Institutionen för datavetenskap (DV), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-49671.
Pełny tekst źródłaColaço, André Freitas. "Mobile terrestrial laser scanner for site-specific management in orange crop". Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/11/11152/tde-23012017-151317/.
Pełny tekst źródłaSensores baseados em tecnologia LiDAR (Light Detection and Ranging) têm o potencial de fornecer modelos tridimensionais de árvores, provendo informações como o volume e altura de copa. Essas informações podem ser utilizadas em diagnósticos e recomendações localizadas de fertilizantes e defensivos agrícolas. Este estudo teve como objetivo investigar o uso de sensores LiDAR na cultura da laranja, uma das principais culturas de porte arbóreo no Brasil. Diversas pesquisas têm desenvolvido sistemas LiDAR para culturas arbóreas. Porém, normalmente tais sistemas são empregados em plantas individuais ou em pequenas áreas. Dessa forma, diversos aspectos da aquisição e processamento de dados ainda devem ser desenvolvidos para viabilizar a aplicação em larga escala. O primeiro estudo deste documento (Capítulo 3) focou no desenvolvimento de um sistema LiDAR (Mobile Terrestrial Laser Scanner - MTLS) e nova metodologia de processamento de dados para obtenção de informações acerca da geometria das copas em pomares comerciais de laranja. Um sensor a laser e um receptor RTK-GNSS (Real Time Kinematics - Global Navigation Satellite System) foram instalados em um veículo para leituras em campo. O processamento de dados foi baseado na geração de uma nuvem de pontos, seguida dos passos de filtragem, classificação e reconstrução da superfície das copas. Um pomar comercial de laranja de 25 ha foi utilizado para a validação. O sistema de aquisição e processamento de dados foi capaz de produzir uma nuvem de pontos representativa do pomar, fornecendo informação sobre geometria das plantas em alta resolução. A escolha sobre o tipo de classificação da nuvem de pontos (em plantas individuais ou em seções transversais das fileiras) e sobre o algoritmo de reconstrução de superfície, foi discutida nesse estudo. O segundo estudo (Capítulo 4) buscou caracterizar a variabilidade espacial da geometria de copa em pomares comerciais. Entender tal variabilidade permite avaliar se a aplicação em taxas variáveis de insumos baseada em sensores LiDAR (aplicar quantias de insumos proporcionais ao tamanho das copas) é uma estratégia adequada para otimizar o uso de insumos. Cinco pomares comerciais foram avaliados com o sistema MTLS. De acordo com a variabilidade encontrada, a economia de insumos pelo uso da taxa variável foi estimada em aproximadamente 40%. O segundo objetivo desse estudo foi avaliar a relação entre a geometria de copa e diversos outros parâmetros dos pomares. Os mapas de volume e altura de copa foram comparados aos mapas de produtividade, elevação, condutividade elétrica do solo, matéria orgânica e textura do solo. As correlações entre geometria de copa e produtividade ou fatores de solo variaram de fraca até forte, dependendo do pomar. Quando os pomares foram divididos entre três classes com diferentes tamanhos de copas, o desempenho em produtividade e as características do solo foram distintas entre as três zonas, indicando que parâmetros de geometria de copa são variáveis úteis para a delimitação de unidades de gestão diferenciada em um pomar. Os resultados gerais desta pesquisa mostraram o potencial de sistemas MTLS para pomares de laranja, indicando como a geometria de copa pode ser utilizada na gestão localizada de pomares de laranja.
Halim, Humam. "Evaluation of a Near Field Scanner For Active Measurements of Mobile Phones". Thesis, University of Gävle, Department of Technology and Built Environment, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-3469.
Pełny tekst źródłaThe radio performance measurements of terminal antennas require expensive investments and they are often performed in anechoic chambers. Now a days measurement techniques using wheeler cap, reverberation chamber, etc have become popular. But these methods are used for measurements either during the design or production or in-network testing phases but not for all. Hence EMSCAN, a Canadian company, has come up with a device called Lab express near field scanner to counter this problem.
In this thesis an attempt is made to study the EMSCAN near field scanner by looking into architecture and design aspects of this device. Moreover, the capability of the device to measure the radio performance of the terminal antennas in terms of radiation pattern and total radiated power (TRP) is also studied and anlaysed.The analysis of the TRP and radiation pattern measurements of the terminal antennas is done by comparing the EMSCAN measurement results of 10 commercially available mobile phones with that of CTIA approved Satimo SG24 chamber.
The TRP and radiation pattern measurements are done for GSM 900 MHz and DCS 1800 MHZ low bands i.e.975 and 512 respectively. Furthermore, the dependency of the measured TRP on the positioning of the mobile phone on EMSCAN is tested by measuring the TRP and the radiated power of a single mobile phone.
The measurement results after comparison suggest that there is a correlation of around 79% at 1800 MHz and 49% at GSM 900 MHz among the two methods. This leads to the conclusion that EMSCAN scanner cannot replace the anechoic chambers for estimating the radio performance of terminal antennas. The results obtained by measuring the mobile phone in 8 different positions suggest that there is no significant difference in the TRP measured. There is a difference of 1.25dB was observed between the maximum and minimum TRP measured in two different positions on the near field scanner.
The results obtained by both the methods are verified by computing the TRP and radiation pattern in Matlab.The Matlab results agrees more with the EMSCAN results than Satimo SG 24 chamber results.
Caliri, Claudia. "A mobile xrf scanner for a real-time elemental imaging of painted artworks". Doctoral thesis, Università di Catania, 2017. http://hdl.handle.net/10761/3771.
Pełny tekst źródłaWatanabe, Masao. "Performance Evaluation of a Newly Developed MR-Compatible Mobile PET Scanner with Two Detector Layouts". Kyoto University, 2020. http://hdl.handle.net/2433/253141.
Pełny tekst źródłaAlshawa, Majd. "Contribution à la cartographie mobile : développement et caractérisation d’un système basé sur un scanner laser terrestre". Strasbourg, 2009. https://publication-theses.unistra.fr/public/theses_doctorat/2010/ALSHAWA_Majd_2010.pdf.
Pełny tekst źródłaMobile mapping technology has been developing with the growing demand of three-dimensional urban and peri-urban data. This thesis approach is based on the design of a low cost terrestrial mobile mapping system with the adaptation of a Terrestrial Laser Scanner for low dynamics. Our goal is not to compete in performance with commercial systems but rather to appropriate scientific and technological skills which will help in proposing solutions in the field of mobile mapping. Necessary operational settings, such as synchronization and calibration are explained. Then, some methods based on the adjustment of polynomial models are developed according to the traveled paths. Data from various sensors (GPS/ AHRS/TLS) are filtered and tested before their integration by direct georeferencing equation in order to produce a correct point cloud. A comprehensive study on the influence of errors of each sensor on the resulting point cloud is established. The theoretical precision is compared with reference data in order to validate the error analyze. A digital calibrated camera is integrated in the system as a navigation sensor. A photogrammetric solution is proposed to improve the accuracy of the orientation and the position calculated by integrating GPS/ AHRS. At the end of this thesis, an approach towards automatic modeling is proposed to make use of the geometry and precision provided by the system. The designed prototype supplies point clouds whose precision is about 10 to15 cm at the average distance of 20 m
Ryusuke, Nakamoto. "Comparison of PET/CT with sequential PET/MRI using an MR-compatible mobile PET system". Kyoto University, 2018. http://hdl.handle.net/2433/232099.
Pełny tekst źródłaRascão, Madalena da Silva Ruivo Coreixas. "Aquisição de dados LiDAR com TLS e HMLS para deteção de árvores individuais". Master's thesis, ISA, 2019. http://hdl.handle.net/10400.5/21291.
Pełny tekst źródłaLiDAR (Light Detection And Ranging) é um sistema baseado nos princípios de Deteção Remota que permite medir distâncias com base no tempo da trajetória da radiação laser, desde que é emitida pelo aparelho até que retorna ao recetor depois de ser refletida numa superfície sólida. A aplicabilidade deste sistema é abrangente a várias áreas da engenharia e prende-se com a capacidade que o mesmo tem de recolher e armazenar dados tridimensionais em forma de nuvens de pontos de qualquer objeto sólido sobre a superfície terrestre. No sector florestal, este sistema permite estimar características dos povoamentos e digitalizar uma extensa área de floresta, de uma forma automatizada, rápida e com detalhe na ordem dos milímetros. O objetivo do presente trabalho é avaliar a capacidade do sistema LiDAR na individualização da árvore comparando as coordenadas estimadas obtidas com dois métodos LiDAR - HMLS (Held-Hand Mobile Laser Scanner) e TLS (Terrestrial Taser Scanner) - com as coordenadas obtidas com GPS sub-métrico, pelo método tradicional de campo, num ensaio clonal de Eucalyptus globulus Labill. com 10 anos de idade. O presente estudo serviu também como primeira abordagem ao desempenho dos dois métodos LiDAR na obtenção de diâmetros às várias alturas do tronco, recorrendo aos algoritmos disponíveis no software R. Para a deteção das árvores individuais, os resultados demonstraram que, em média, o método TLS detetou 65,1% das árvores, enquanto o método HMLS detetou 44,7% das árvores, para todas as parcelas de estudo. Comprovou-se ainda que o levantamento com HMLS só é vantajoso para terrenos regulares e percursos retos. Concluiu-se que deve ser efetuada uma melhoria nos processos associados à utilização do algoritmo SLAM (Simultaneous Localization And Mapping) e salientou-se a importância de utilizar pontos de referência em campo para a obtenção de nuvens de pontos de melhor qualidade
N/A
Mulè, Leonardo. "Low-cost survey solutions to support HBIM - Two case studies: the Azurém Canteen and Paço dos Duques in Portugal". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2022.
Znajdź pełny tekst źródłaKsiążki na temat "Scanner mobile"
Kneitel, Tom. Tune in on telephone calls: Scanner & shortwave frequency directory. Commack, NY: CRB Research Books, 1988.
Znajdź pełny tekst źródłaCanadian Coordinating Office for Health Technology Assessment. A comparison of fixed and mobile CT and MRI scanners. Ottawa, Ont: The Office, 1995.
Znajdź pełny tekst źródłaPrelinger, Richard. Monitor America. Scanner Master Publishing Corporation, 1985.
Znajdź pełny tekst źródłaCzęści książek na temat "Scanner mobile"
Enesi, Indrit, i Blerina Zanaj. "Implementing Steganocryptography in Scanner and Angio-Scanner Medical Images". W Mobile Networks for Biometric Data Analysis, 109–20. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-39700-9_9.
Pełny tekst źródłaJensen, B., G. Ramel i R. Siegwart. "Detecting Semi-static Objects with a Laser Scanner". W Autonome Mobile Systeme 2003, 21–31. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-18986-9_3.
Pełny tekst źródłaFlores-Rodríguez, K. L., J. J. González-Barbosa, F. J. Ornelas-Rodríguez, J. B. Hurtado-Ramos i P. A. Ramirez-Pedraza. "Road Signs Segmentation Through Mobile Laser Scanner and Imagery". W Advances in Computational Intelligence, 376–89. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-60887-3_33.
Pełny tekst źródłaPhan, Anh Thu Thi, i Anh Vy Ngoc Huynh. "Automatic Extracting Road Edges from Mobile Laser Scanner Point Cloud". W Lecture Notes in Civil Engineering, 1624–32. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-7434-4_175.
Pełny tekst źródłaDhillon, Vandana, Amruta Pabarekar i Sreedevi Nair. "Active Bandpass Filter Design to Attenuate Harmonic Distortions in MPI Scanner". W International Conference on Mobile Computing and Sustainable Informatics, 61–67. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49795-8_6.
Pełny tekst źródłaJose, Jephin V., M. Sherin Eliyas, Sathish Kumar i Angeline Benitta. "Smart Industrial Scanner for Implementation of Relevant Data Parsing from Prescriptions Using SSWF Algorithm". W Mobile Radio Communications and 5G Networks, 625–36. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7982-8_52.
Pełny tekst źródłaMittal, Mamta, Gopi Battineni, Waqar Ahmad, Nitin Kumar i Ravi Upreti. "Mathematical Scanner (M-Scan) Mobile Application for Solving Simple Math Equations". W Advances in Intelligent Systems and Computing, 345–53. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-2597-8_29.
Pełny tekst źródłaJose, Jephin V., Sherin Eliyas, Sathish Kumar i Angeline Benitta. "Correction to: Smart Industrial Scanner for Implementation of Relevant Data Parsing from Prescriptions Using SSWF Algorithm". W Mobile Radio Communications and 5G Networks, C1. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7982-8_57.
Pełny tekst źródłaLiu, Tianyu, Ye Gu, Weihua Sheng, Yongqiang Li i Yongsheng Ou. "Detection and Tracking of Moving Objects for Indoor Mobile Robots with a Low-Cost Laser Scanner". W Artificial Intelligence and Mobile Services – AIMS 2018, 243–50. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-94361-9_19.
Pełny tekst źródłaPrevitali, Mattia, Fabrizio Banfi i Raffaella Brumana. "Handheld 3D Mobile Scanner (SLAM): Data Simulation and Acquisition for BIM Modelling". W R3 in Geomatics: Research, Results and Review, 256–66. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-62800-0_20.
Pełny tekst źródłaStreszczenia konferencji na temat "Scanner mobile"
Jedwabny, Tomasz, Piotr Skrzypczynski i Grzegorz Wiczynski. "Optical scanner for mobile robots". W Optoelectronic and Electronic Sensors II, redaktorzy Zdzislaw Jankiewicz i Henryk Madura. SPIE, 1997. http://dx.doi.org/10.1117/12.266720.
Pełny tekst źródłaAlthobaiti, Abdulrahman, Fadl Abdellatif, Ali Alrasheed, Hassane Trigui, Ahmed Alsaadi i Sahejad Patel. "AR Gauge Scanner Mobile Application". W Abu Dhabi International Petroleum Exhibition & Conference. SPE, 2021. http://dx.doi.org/10.2118/207441-ms.
Pełny tekst źródłaShrestha, Ashok, Truong Tran, Ramazan Aygun i Marc Pusey. "Mobile Scanner for Protein Crystallization Plates". W 2018 IEEE International Symposium on Multimedia (ISM). IEEE, 2018. http://dx.doi.org/10.1109/ism.2018.000-5.
Pełny tekst źródłaMarkom, Marni Azira, Abdul Hamid Adom, Erdy Sulino Mohd Muslim Tan, Shazmin Aniza Abdul Shukor, Norasmadi Abdul Rahim i Ali Yeon Md Shakaff. "A mapping mobile robot using RP Lidar scanner". W 2015 IEEE International Symposium on Robotics and Intelligent Sensors (IRIS). IEEE, 2015. http://dx.doi.org/10.1109/iris.2015.7451592.
Pełny tekst źródłaPodsedkowski, L., J. Nowakowski, M. Idzikowski i I. Visvary. "Online navigation of mobile robots using laser scanner". W Proceedings of the First Workshop on Robot Motion and Control. RoMoCo'99 (Cat. No.99EX353). IEEE, 1999. http://dx.doi.org/10.1109/romoco.1999.791082.
Pełny tekst źródłaRyde, Julian. "An inexpensive 3D scanner for indoor mobile robots". W 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2009). IEEE, 2009. http://dx.doi.org/10.1109/iros.2009.5354173.
Pełny tekst źródłaSobreira, Heber, A. Paulo Moreira, Paulo Gomes Costa i Jose Lima. "Robust Mobile Robot Localization Based on Security Laser Scanner". W 2015 IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC). IEEE, 2015. http://dx.doi.org/10.1109/icarsc.2015.28.
Pełny tekst źródłaMorita, Kakeru, Masafumi Hashimoto i Kazuhiko Takahashi. "Point-Cloud Mapping and Merging Using Mobile Laser Scanner". W 2019 Third IEEE International Conference on Robotic Computing (IRC). IEEE, 2019. http://dx.doi.org/10.1109/irc.2019.00078.
Pełny tekst źródłaRamm, Roland, Christian Bräuer-Burchardt, Peter Kühmstedt i Gunther Notni. "High-resolution mobile optical 3D scanner with color mapping". W SPIE Optical Metrology, redaktorzy Luca Pezzati i Piotr Targowski. SPIE, 2017. http://dx.doi.org/10.1117/12.2269964.
Pełny tekst źródłaJavadi, Bahman, Quoc Lap Trieu, Kenan M. Matawie i Rodrigo N. Calheiros. "Smart Food Scanner System Based on Mobile Edge Computing". W 2020 IEEE International Conference on Cloud Engineering (IC2E). IEEE, 2020. http://dx.doi.org/10.1109/ic2e48712.2020.00009.
Pełny tekst źródłaRaporty organizacyjne na temat "Scanner mobile"
Palmer, Donald D., Wood Jr. i Nancy L. Mobile Automated Scanner System (MAUS). Fort Belvoir, VA: Defense Technical Information Center, kwiecień 1999. http://dx.doi.org/10.21236/ada366930.
Pełny tekst źródłaZhylenko, Tetyana I. Auto Checker of Higher Mathematics - an element of mobile cloud education. [б. в.], lipiec 2020. http://dx.doi.org/10.31812/123456789/3895.
Pełny tekst źródłaPabón Méndez, Mónica Rocío, Silvia Andrea Tarazona Ariza, Alfredo Duarte Fletcher i Nelly Johana Álvarez Idarraga. English Vowel Sounds: A Practical Guide for the EFL Classroom. Ediciones Universidad Cooperativa de Colombia, luty 2023. http://dx.doi.org/10.16925/gcgp.78.
Pełny tekst źródłaCoastal Lidar And Radar Imaging System (CLARIS) mobile terrestrial lidar survey along the Outer Banks, North Carolina in Currituck and Dare counties. Coastal and Hydraulics Laboratory (U.S.), styczeń 2020. http://dx.doi.org/10.21079/11681/39419.
Pełny tekst źródłaCoastal Lidar And Radar Imaging System (CLARIS) mobile terrestrial lidar survey along the Outer Banks, North Carolina in Currituck and Dare counties. Coastal and Hydraulics Laboratory (U.S.), styczeń 2020. http://dx.doi.org/10.21079/11681/39419.
Pełny tekst źródła