Rozprawy doktorskie na temat „RFID products”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „RFID products”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Lugo, Heinz. "Novel development of distributed manufacturing monitoring systems to support high cost and complexity manufacturing". Thesis, Loughborough University, 2013. https://dspace.lboro.ac.uk/2134/13285.
Pełny tekst źródłaAbdelnour, Abanob. "Développement d'étiquettes RFID UHF pour la traçabilité et le contrôle de qualité des produits alimentaires, Application : production de fromage". Thesis, Université Grenoble Alpes (ComUE), 2018. http://www.theses.fr/2018GREAT081/document.
Pełny tekst źródłaIn the food sector, the use of RFID makes it possible to improve the safety of food while ensuring better traceability and better monitoring of products. The work of the thesis was mainly carried out within the framework of a project in cooperation with several academic and industrial partners in the cheese sector where the main objective of the project is to develop UHF RFID tags adapted to the constraints of food products by ensuring a dual function: a traceability function with unitary identification, and then a sensing function of cheese maturation by indirect measurement of its electromagnetic and physicochemical properties.The first step of the project was the characterization of the electromagnetic parameters of food products during ripening in order to achieve an appropriate design of the tag antenna. Knowledge of these properties is essential to meet industrial requirements and to integrate systems in right conditions. Also, a correlation study is carried out between the variation of the dielectric properties and that of the chemical properties during the period of cheese ripening. This study helps to understand the difference between cheese types and allows determining the main parameters to follow during cheese maturation for the design of the sensor tag.The second step was the design of identification tags for the traceability of food products during the manufacturing process. The primary objective is to create a UHF RFID tag with a performance that meets the needs of manufacturers in the cheese sector regarding the size, memory and reading distance while respecting the health standards at the packaging level as well as the substrate used. Several UHF RFID tag configurations were realized and tested in an industrial environment where the results obtained show the effectiveness of using an RFID system to automate the traceability of products in the cheese sector.The third step is the design of sensor tags to track the degree of maturation of products during the ripening period. A first solution, based on the exploitation of the effect of variation of the dielectric properties on the tag reading distance, shows a lack of performance due to the small variations as well as the difficulties of measurement in a real environment. A second solution based on the analysis of gas evolution rate shows the possibility of estimating the degree of cheese maturation. However, the sensor activation power and the high cost represent significant challenges and thus it was difficult to adopt this solution. Finally, two alternative solutions to measure the effect of gas evolution were presented. The idea is based on monitoring other parameters varying due to the increase of gas release during cheese maturation. The first sensor tag configuration traces the variation of product dimension due to maturation using a resistive sensor. On the other hand, the second sensor tag configuration measures the change of pressure inside the product packaging due to gas production. The results obtained show that these two sensor RFID tag configurations can offer simple and practical solutions for controlling the cheese ripening process
Bolatli, Yurtseven. "Utility Analysis And Computer Simulation Of Rfid Technologies In The Supply Chain Applications Of Production Systems". Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/12611261/index.pdf.
Pełny tekst źródłalowvolume high-value&rdquo
products is considered by focusing on the production processes of a real company. First, the processes of the company are examined and associated problems are determined. Accordingly, a simulation of the current situation is constructed by using the discrete event simulation technique, in order to obtain an accurate model. In addition to modeling the current situation, this simulation model provides a flexible platform to analyze different scenarios and their effects on the company production. Next, various scenarios including RFID technology deployment are examined, and their results are compared with respect to profitanalysis which takes into consideration the changes in the production, work in process (WIP) inventory, stockouts, transportation and initial investment. Finally, the analysis of the results and conclusions are given in order to provide guidance for companies with &ldquo
low-volume high-value&rdquo
product portfolios.
Kheiravar, Sara. "SToP Tampering of Products in Aviation Industry Design a practical guidline for choosing an appropriate RFID system for anti-counterfeiting in the aviation industry". Thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-19127.
Pełny tekst źródłaUppsatsnivå: D
Kuchařová, Hana. "Technologie RFID v ekonomických sektorech". Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-85237.
Pełny tekst źródłaMorenza, Cinos Marc. "RFID autonomous robot for product inventory and location". Doctoral thesis, Universitat Pompeu Fabra, 2018. http://hdl.handle.net/10803/664139.
Pełny tekst źródłaEs presenta una solució per a l'automatizació de l'inventari i la localització dels productes de tendes i magatzems. Radio Frequecy Identification (RFID), una tecnologia d'identificació automàtica, i la robòtica mòbil es combinen per dissenyar un robot per a inventaris. La navegació del robot està comandada per un algoritme que escolta el progrés de les noves identificacions. L'algoritme és essencial per tal que el robot obtingui una exactitud superior al 99% i per tal que la duració de l'inventari sigui òptima. S'implementen una interfície d'interacció i el conjunt de procediments necessaris per a operar amb el robot. La localització dels productes s'aborda de dues maneres. La primera consisteix en aplicar clústering a les cadenes d'identificacions dels productes i després assignar la localitzacio coneguda d'un producte de referència a tots els membres del clúster. El segon mètode de localització consisteix en aplicar Bayesian Recursive Estimation després d'haver computat un model d'identificació. Es proposa una metodolgia per a l'avaluació dels inventaris i el dataset generat per a l'anàlisi és compartit obertament. L'exactitud dels inventaris i la localització s'avaluen en escenaris reals. Es demostra que la solució proposada és de valor i està llesta per entrar al mercat.
Dotas, Arvydas. "Buitinio šaldytuvo produktų atpažinimo ir identifikavimo sistema". Master's thesis, Lithuanian Academic Libraries Network (LABT), 2007. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2007~D_20070816_144200-04424.
Pełny tekst źródłaIn this work, there are analyzed tendencies of the "Smart house" technology and possibilities to integrate new technologies into a kichen's appliences. Acording to results of the analizes of product information and possible methods of the product recognition and identification there was compossed product recognition and identification system model.
Dvořáková, Alena. "Studie řízení plynulých materiálových toků s využitím značení produktů". Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2008. http://www.nusl.cz/ntk/nusl-221599.
Pełny tekst źródłaYang, Bo, i 楊波. "Implementation issues in RFID-based track-and-trace anti-counterfeiting". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/208016.
Pełny tekst źródłapublished_or_final_version
Industrial and Manufacturing Systems Engineering
Master
Master of Philosophy
Poon, Chun-hin. "An RFID-based track-and-trace anti-counterfeiting system". Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/HKUTO/record/B39556906.
Pełny tekst źródła潘俊軒 i Chun-hin Poon. "An RFID-based track-and-trace anti-counterfeiting system". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2007. http://hub.hku.hk/bib/B39556906.
Pełny tekst źródłaSaba, Rita. "Caractérisation et conception de tags RFID-UHF dédiés aux produits textiles". Thesis, Aix-Marseille, 2013. http://www.theses.fr/2013AIXM4783.
Pełny tekst źródłaThis thesis is part of a collaboration between the company Tagsys and IM2NP, under the PACID-TEXTILE project. The aim of the thesis is to create a robust UHF RFID tag antenna that can be easily and discreetly integrated into textile products.The idea is to design two antennas electromagnetically coupled and adapted for selected chips. Both antennas are designed to facilitate the coupling between them. The first antenna is packaged in a robust material in order to protect the chip from laundry cycles. The second antenna is made up by electro-thread. The first part of the work is to characterize the packaged antenna and packaging material. The second part is to measure the conductivity of the used thread, to establish the most accurate model possible. Tests of wire resistance are also made. Toughness of each wire is also tested.The third part deals with the antenna design. The tags are designed to have a minimum range of 4m. They have to resist deformation and stacking. These tags are subjected to various tests to determine their performance. Using resources available in the laboratory IM2NP (RFID platform), a "Benchmarking " is carried on different tags to find the best that meet the requirements of the specifications
Grubb, Daniel, i Toni Baslakovski. "Presenting Product Information : Helping Customers’ Decision Making, Using a Personal Mobile RFID Reader". Thesis, Växjö University, School of Mathematics and Systems Engineering, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-987.
Pełny tekst źródłaProblem drafting: Is it possible to give the customer larger foundation for decision making of contemplated product by presenting more extensive and personal filtered information regarding the product, with the help of a personal RFID-reader?
Methodology: In this bachelor thesis, we used constructive research to build the prototype in which we used a conceptual-analytic approach to gather the information to build it. Empirical studies were used for evaluation.
Results: Our conclusion shows that even though it is possible to
increase the basis on which the customers make decisions, through a RFID system, there are several issues that need to be addressed and taken into consideration before making it possible to implement such a system.
Gonnagar, Anand Subhashchandra. "Product traceability in manufacturing industries: Business case and pilot project". Master's thesis, Escola Superior de Tecnologia e Gestão de Oliveira do Hospital, 2018. http://hdl.handle.net/10400.26/31638.
Pełny tekst źródłaN/A
Canepa, Amy, Grecia Rodríguez, Jose Rojas i Carlos Raymundo. "Design of a model of marketing a product of detection and identification with technology of positioning in interiors based on RFID". Springer Verlag, 2020. http://hdl.handle.net/10757/656366.
Pełny tekst źródłaCurrently, one of the main problems is that “time” is becoming more important, which will cause people to perform multiple tasks every day because of a hectic lifestyle, and with it the issue of lost articles. and poorly placed also increases significantly. Although there have been initiatives by some small companies to offer solutions characterized by the use of positioning technologies, these have not achieved the desired success. That is why, in this research, a scheme for the design, evaluation and implementation and marketing of a product with RFID technology with location and alert functions in the absence of proximity to solve the aforementioned problem has been proposed. The scheme and the product were validated through focus tools, surveys and scenario analysis. Likewise, the components of the business model of the scheme allow to reach the demand.
Castillo, Alva Christian Leonardo. "Aplicación de la tecnología RFID para mejorar el control de productos terminados en un almacén de hilos". Bachelor's thesis, Universidad Nacional Mayor de San Marcos, 2018. https://hdl.handle.net/20.500.12672/9533.
Pełny tekst źródłaLa tecnología y la ciencia evolucionan constantemente y la tecnología de identificación por radio frecuencia es, sin duda, una de las tecnologías de comunicación para la identificación de productos que está experimentando un crecimiento acelerado y sostenido en los últimos tiempos. La investigación aplica RFID como herramienta importante para mejorar el control de los productos terminados en un almacén de hilos, haciendo un uso eficiente de los recursos reduciendo los tiempos operacionales del proceso. Los resultados de la aplicación de tecnología RFID muestran que mediante el uso de la misma puede mejorarse el control de los productos terminados, el costo de inventarios y la productividad de la empresa.
Tesis
Yang, Hye-Ran. "Mercury contamination and exposure assessment of fishery products in Korea". 京都大学 (Kyoto University), 2016. http://hdl.handle.net/2433/215463.
Pełny tekst źródłaKyoto University (京都大学)
0048
新制・課程博士
博士(社会健康医学)
甲第19637号
社医博第70号
新制||社医||9(附属図書館)
32673
京都大学大学院医学研究科社会健康医学系専攻
(主査)教授 木原 正博, 教授 小杉 眞司, 教授 YOUSSEFIAN Shohab
学位規則第4条第1項該当
Grande, Eliana Tiba Gomes. "ANÁLISE DE UM PROCESSO DE PRODUÇÃO DE UM FRIGORÍFICO DE CARNE BOVINA UTILIZANDO A TECNOLOGIA RFID". Pontifícia Universidade Católica de Goiás, 2012. http://localhost:8080/tede/handle/tede/2458.
Pełny tekst źródłaSince 2008, Brazil has been the largest beef exporter worldwide and also has had. The largest commercial beef herd in the world, which is around 205.3 million animals (IBGE, 2009). Remaining on the top of the ranking depends on technology implementations in the industry and a greater knowledge of the entire production process of beef cattle, mainly the identification of bottlenecks. The RFID technology, which is based on automatic transmission of data, has become a useful tool in various aspects of any productive sector. Throughout this technology one is able not only to track their products throughout the production process, but also do inventory control, logistics, quality control, with constant monitoring of temperature and moisture, which are essential for health y food, all done automatically in real time . The objective of this work was to analyze a solution for the control of traceability in the production process of a slaughter house using RFID technology. This monitoring can be accompanied from anywhere, and anytime because the RFID system uses the middleware that processes data read by the physical layer and provides them to various environments such as the Web. As a result to analyze has the confirmation of the feasibility of using RFID technology in such an unusual environment as the example of the production process in a slaughter house.
O Brasil, desde 2008, é o maior exportador de carne bovina no contexto mundial. Nele se concentra o maior rebanho comercial do mundo: cerca de 205,3 milhões de animais (IBGE, 2009). A permanência no topo do ranking depende das implementações tecnológicas no setor e de um maior conhecimento do processo produtivo de toda a cadeia da carne bovina, principalmente no que se refere à identificação dos pontos de gargalos. A tecnologia RFID, baseada na transmissão automática dos dados, vem se tornando uma aliada em vários aspectos em qualquer setor produtivo. Através desta tecnologia, pode ser possível não somente rastrear seus produtos durante todo o processo produtivo, mas também fazer controle de estoque, de logística, controle de qualidade com o monitoramento constante da temperatura e umidade, essencial à sanidade do alimento, tudo feito automaticamente em tempo real. Objetivou-se nesta dissertação analisar uma solução para a continuidade da rastreabilidade iniciada pelo SISBOV no contexto do processo produtivo de um frigorífico utilizando a tecnologia RFID. Este monitoramento pode ser acompanhado de qualquer lugar, a qualquer hora, pois a solução analisada possui um midlleware que processa dos dados lidos pela camada física e disponibiliza-os para vários ambientes, tais como a Web. Como resultados da análise têm-se a confirmação da viabilidade da utilização da tecnologia RFID em um ambiente tão incomum como é o caso do processo produtivo de um frigorífico.
Mikros, Efthimios. "Mitigation of EMI/RFI produced by a 1.2 kW uninterruptible power supply". Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from the National Technical Information Service, 1993. http://handle.dtic.mil/100.2/ADA273149.
Pełny tekst źródłaThesis advisor(s): Adler, Richard William. "September 1993." Includes bibliographical references. Also available online.
Farhat, Hadi. "Dispositif de détection et localisation basé sur un système RFID UHF intelligent : application au domaine de la grande distribution". Thesis, Lille, 2019. http://www.theses.fr/2019LIL1I025.
Pełny tekst źródłaUHF RFID technology, also known as RAIN RFID, is a passive technology that enables the automatic identification of items. Thus, it bridges the gap between the physical and digital worlds by allowing an item to become alive on the Internet of things thanks to inexpensive and battery-free RFID tags. Passive UHF RFID technology has witnessed a significant development due to the accelerated growth of sophisticated technological devices. This development is largely driven by the supply chain and the retail industries. Passive UHF RFID Gen2, among other tracing and identification solutions, is the logical choice given the low costs of large-volume tags, ease of printing and being battery-free, the need for maintenance is completely eliminated.The main concern of resellers, the withdrawal of the product, is mainly affected by errors related to visibility (stock gap, theft, loss) and human errors. It is, therefore, necessary to improve visibility and automate the process. Despite its advantages, RFID deployment in supermarkets is still facing many obstacles and challenges. In this thesis, we focus on technological availability by defining and analyzing the different challenges and possibly proposing the appropriate solutions.First, the maximum reading distances of passive tags are evaluated in different environments in order to identify the factors impacting them. At the end of this study, an alternative characterization method is proposed to control tag performance and identify tagged objects with poor performance. Secondly, we will use this method to propose a new solution to improve detection. The algorithms behind this solution allow readers to negotiate their configurations with the environment and with each other. Finally, a new location algorithm is proposed to improve accuracy. This algorithm is based on the exploitation of the answers of the reliable tags of the medium. The proposed solutions are universal, compatible with market readers and add no cost to the hardware used for detection
Crosby, Chris. "Producer level cost analysis of the U.S. National Animal Identification System". Thesis, Manhattan, Kan. : Kansas State University, 2008. http://hdl.handle.net/2097/1389.
Pełny tekst źródłaRibeiro, Priscilla Cristina Cabral. "Proposição de um método de avaliação de tecnologia de identificação: o caso RFID nas cadeias de carne bovina no Brasil e nos EUA". Universidade Federal de São Carlos, 2009. https://repositorio.ufscar.br/handle/ufscar/3344.
Pełny tekst źródłaFinanciadora de Estudos e Projetos
Identification technologies such as Radio Frequency Identification RFID and barcode are used in traceability systems. RFID is a promising identification and Information and Communication Technology (ICT) for traceability systems. It can be widely used on various products to control information from the beginning of the process until they reach the ultimate consumer. The objective of this study is to propose a method to evaluate identification technologies, especially RFID, in agro industrial chains and apply it to the beef cattle chain traceability systems. The research methodology used was a qualitative case study using interviews. The evaluation method provided a clear and wide view of the use of RFID in the cattle chain including importance and barriers. The results indicated some RFID advantages such as quickness in the traceability process, information accuracy, and more information stored in the tags among others. The RFID has some disadvantages such as: high costs; absence of international standard for labels; complex integration of this system; consumer privacy; and technical aspects such as broad band limitations for data transmission. In addition, the case studies revealed resistance against the use of RFID.
Em um sistema de rastreabilidade, utilizam-se algumas tecnologias de identificação, como a Identificação por Rádio Freqüência (Radio Frequency Identification RFID) e o código de barras. A RFID é uma Tecnologia da Informação e da Comunicação (TIC) promissora para os sistemas de rastreabilidade. Essa tecnologia pode ser utilizada em todos os produtos para controle de suas informações desde o seu ponto de origem até o consumidor final. O objetivo da tese é propor um método de avaliação de tecnologias de identificação, em especial a RFID, em cadeias agroindustriais, aplicando-o em sistemas de rastreabilidade da cadeia da carne bovina. O método de pesquisa escolhido foi o estudo de caso, com abordagem de pesquisa qualitativa, tendo entrevistas como instrumento de pesquisa. O método de avaliação foi capaz de tornar mais visível a importância e os entraves à implantação da RFID na cadeia de carne bovina. A pesquisa revelou que a RFID apresenta vantagens como rapidez no processo de rastreabilidade, precisão das informações, quantidade maior de informação inserida nas etiquetas, entre outras. A RFID possui desvantagens, como: custos altos; falta de um padrão internacional para as etiquetas; complexidade da integração do sistema; privacidade e segurança do consumidor; e limitações em termos de largura de banda necessária para transmissão dos dados. Além disso, os estudos de caso reveleram uma resistência à utilização da RFID.
Cea, Ramirez Aldo. "Contribution à la Modélisation et à la Gestion des Interactions Produit-Processus dans la Chaîne Logistique par l'Approche Produits Communicants". Phd thesis, Université Henri Poincaré - Nancy I, 2006. http://tel.archives-ouvertes.fr/tel-00139831.
Pełny tekst źródłaNordlindh, Mattias, i Mikael Berg. "Implementing Internet of Things in the Swedish Railroad Sector : Evaluating Design Principles and Guidelines for E-Infrastructures". Thesis, Uppsala universitet, Informationssystem, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-181536.
Pełny tekst źródłaHaouari, Lobna. "MODELISATION ET SIMULATION DE L’INTRODUCTION DE TECHNOLOGIES RFID DANS DES SYSTEMES DE CONFIGURATION A LA DEMANDE". Thesis, Saint-Etienne, EMSE, 2012. http://www.theses.fr/2012EMSE0680/document.
Pełny tekst źródłaRadio Frequency IDentification allows quick and secure identification of objects. In mass customisation systems, RFID technologies can be peculiarly efficient, because they are able to support the complex flows of information which characterize these systems.In this study, we focus on RFID technologies effects on configuration to order (CTO) systems.We base the research on an existing case in order to obtain reliable information directly usable by decision makers. The rarity of studies offering quantitative, detailed and real case based measures makes the originality of this thesis.RFID technology implementation's effect is analysed by a discrete event simulation approach and is presented in two levels:The first level relates direct changes brought about by RFID (e.g. faster execution of the many checks due to the wide range of products, reduced workload for resources…). These changes have an impact on system's performance in terms of lead time, late orders' rate, etc.The second level is axed on deeper changes occurring due to the increased product visibility and the ease of collecting large amounts of data with an RFID technology.These changes mainly focus on the dynamic allocation of workload. Reconsidering of processes and proposing changes deeper than the simple direct technology impact is a breakthrough, in this study, because of the lack of publications highlighting this benefit adequately.In conclusion, RFID contribution in CTO systems and, extensively, in assembly to order systems may be undeniable. Moreover, beyond the direct technology impact, rethinking how the system works by exploiting the deeper potential of technology can increase profits
Westafer, Ryan S. "Investigation of phononic crystals for dispersive surface acoustic wave ozone sensors". Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/41165.
Pełny tekst źródłaTchapnga, Takoudjou Rodrigue. "Méthodes de modélisation et d'optimisation par recherche à voisinages variables pour le problème de collecte et de livraison avec transbordement". Thesis, Bordeaux, 2014. http://www.theses.fr/2014BORD0052/document.
Pełny tekst źródłaThe thesis is conducted under the ANR project PRODIGE and it is focused on seeking strategies allowing the optimization of transport in general and road freight transport in particular. The transportation problem support for this study is the pickup and delivery problem with transshipment.This problem generalizes several classical transportation problems.Transshipment is used as optimization and flexibility leverage. To study and solve this problem, analyzes are performed along three axes :the first objective concerns the development of an analytical model, more accurately a mathematical model with mixed variables. This model allows providing optimal solution to the decision maker, but has the disadvantage of requiring a time resolution that grows exponentially with the size of the problem. This limitation is overcome by the second line of the study that solves the transportation problem studied by an approximate optimization method while ensuring satisfactory solutions. The method used is a mataheuristic broadly followed the variables neighborhoods research principles. In the third objective, the overall results obtained in the thesis are tested in real transport situation via the PRODIGE project
Tröger, Ralph. "Supply Chain Event Management – Bedarf, Systemarchitektur und Nutzen aus Perspektive fokaler Unternehmen der Modeindustrie". Doctoral thesis, Universitätsbibliothek Leipzig, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-155014.
Pełny tekst źródłaLal, Mel-Yin, i 賴美銀. "Consumers’ Perception and Behavioral Intention toward Privacy-related Products in RFID". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/44955387746278079320.
Pełny tekst źródła清雲科技大學
企業管理系暨經營管理研究所
97
The current research was intended to study consumers’ attitudes towards RFID privacy issues. One of the objectives was to test the theory of reasoned action (Feihbein and Anjze, 1978 ) based on consumers’ perception towards RFID embedded products. Since it was a quantitative study, a pilot test of the questionnaire was conducted using college students. Results indicated that very few respondents were familiar with the term of “RFID.” As a result, it was decided that 1) the sample should be drawn from college students. In this case, a sample of university college students of a private university in the northern part of Taiwan, who were employed during the day time and were students in the evening was gathered; and 2) during a class time when students were asked to respond to the questionnaire, a video showing what RFID was about was carried out. Instead of showing issues related to RFID privacy, a video emphasizing issues concerning the convenience of RFID was shown instead to a class of students by mistake. To be consistent, the same video was shown to all other classes of university college students, who were part of the sample as well. Major findings of the study based on 426 useful returns included the following:1.When and if consumers were aware of their personal consumption data were being collected by companies via RFID, respondents were more concerned about the security of a company’s database and the protection of their privacy; 2.There was a high correlation between the security of a company’s database and its right to use consumers’ personal data as well as consumers right to protect their own privacy data gathered via RFID; 3.Having viewed the video, respondents’ before and after purchasing intentions of RFID-based products were consistent with the theory of reasoned action, though in a different direction.
Yang, Ming-Tzung, i 楊明宗. "A Low-cost Tag RFID Prototype Module For Temperature-sensitive Products". Thesis, 2007. http://ndltd.ncl.edu.tw/handle/06267728787471101853.
Pełny tekst źródła國立成功大學
工學院工程管理專班
95
Currently RFID is being used in variety of industry for managing and controlling internal and external supply chain especially. Due to system setup costs or other reasons, only international enterprise and big size company have been using in internal/external supply chain and monitoring person/material. Some studies have been also made in RFID academically. Temperature logging RFID tag is costly compared to other RFID Tag. What cost-effective alternatives are there when we want to record temperature by RFID system ﹖ This research offers an alternative proposal that is cost-effective RFID with temperature-recording function . The investment in RFID tag is not as expensive as temperature logging RFID tag. We combine short-range, 13MHz passive RFID tag that has least cost of Tag with temperature sensor module as one module . This module can record variations of temperature in internal area. Finally, we make a comparison of the cost versus the benefit expected between this module and KSW VarioSen® Basic Label.
Wen, Tzu-Tseng, i 温子增. "Implementation of an Anti-counterfeiting System for Products Based on RFID". Thesis, 2015. http://ndltd.ncl.edu.tw/handle/32520691762432979140.
Pełny tekst źródła大同大學
資訊工程學系(所)
103
As technology advances, counterfeiting technology also become more powerful, even appraiser can’t verify the counterfeit product easily. The counterfeit products can be found everywhere, such as food, apparel, jewelry, medicine, and so on. It not only cause economic damage, moreover it cause life-threatening to people. The anti-counterfeiting using RFID have been researched for many years, and the portable devices with NFC have increased dramatically, making the future of RFID anti-counterfeiting is promising. Using NFC devices to verify products by reading RFID tags, that is not only protect the products to be counterfeited but also improve the efficiency of enterprise by combining with logistic chain. Besides, RFID anti-counterfeiting technology compares with other technologies, such as optical identification, biometrics, etc., RFID is more easy and fast to verify the products. RFID anti-counterfeiting identify the authenticity of the products electronically. And how it verify the authenticity of products, the first, RFID tags are attached to the products, and then read RFID tags by using RFID reader to catch the identification and verification message codes from RFID tags. Hence, using these message codes can authenticate the products. RFID anti-counterfeiting can effectively against from counterfeits, and also can protect the rights of customers and vendors. The purpose of this research mainly provides a consumer level anti-counterfeiting system with low-cost RFID tags, to establish a barrier wall against counterfeits for consumers and manufacturers.
Liu, Mu-Ching, i 劉沐青. "Study of High-Priced Products Embedded RFID Using AES Cryptology to Prevent Counterfeiting". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/39922164066733749177.
Pełny tekst źródła健行科技大學
資訊工程系碩士班
104
Now many nations have cause huge economic loss because forgery. In fact Taiwan was counterfeit country before. Because more and more counterfeit, it not only cause economic cause but also produce health and safety problem. Security has become an important issue in Taiwan. We propose a research by AES embed into RFID on high-priced commodity to prevent counterfeiting. We use RFID Tag、RFID Reader、Advanced Encryption Standard Cryptography、Sever、MYSQL in the research. And propose security strategy. When you want to buy a product, you need to go to counters. Attendant will read RFID and use Advanced Encryption Standard Cryptography. Consumer data will be encrypted and written into RFID. When you want to sell the product you need to go to Counters. Attendant will read RFID and use Advanced Encryption Standard Cryptography. Consumer data will be decrypted and the new Consumer data will be written in RFID. Information the research will improve Security and counterfeit problem cause our research.
Tsai, Yi-Ching, i 蔡一清. "Designing a RFID-based Traceability System for Screw Products - Exemplified by J Company". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/96671093548433981543.
Pełny tekst źródła國立高雄第一科技大學
資訊管理所
98
Traceability is one of manners to maintain agriculture products’ quality in recent years. If we could introduce this concept into aero-fastener, we can assure its quality. This study takes J company which is going to manufacture aero-fastener for an example. On the basis of safety of aero-fastener, we need a complete traceability to fulfill its necessity, due to its strictness of materials, procedure of production, test and tracing. The radio frequency identification (RFID) has become a fast developed wireless communication technique in recent years. This research discusses how to apply this system into screws with ISO 9002 via the mutual connection of RFID and information system and integrates it into ERP system to plan a thorough “Screw Traceability System”. Furthermore, in Screw Traceability System, consumers can use the tracing code on boxes through the internet to trace back ID of each box of screws, including screw information of assembling, test, delivery, materials, and so that. The visible benefits are sparing time of pouring materials as coarse thread and produce, reduce the time of collecting screws information and lower the cost of stock; on the contrary, those invisibles contain lowering the risk of producing flaw in screws, heightening the material tracing efficiency, clarifying the responsibility about customer’s complain quickly, marketing the differentiation of brands, and expanding the horizon of using traceability. The traceability can prevent factory owners and customers from distrust and the sense of insecurity. It’s a good way to trust and benefit form each other.
Hung, Yi-Min, i 洪宜旻. "The Reliability Verification Process for the Outdoor Products –Example of TPC Transformer RFID nameplate". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/8q658g.
Pełny tekst źródła國立臺北科技大學
工業工程與管理系碩士班
102
Outdoor Equipment increasingly widespread use, long placed outdoors space brought fear to face the impact of harsh environment, so the design must ensure that their products have to withstand the environmental conditions of the reliability of the above. Power delivery process, transformers and more exposed to a variety of settings and outdoor environments. Transformer can affect the end-user to enjoy the quality of the electricity key equipment, inventory and inspection became a regular power company priorities. RFID systems (Radio Frequency Identification; RFID) mainly consists of electronic tags (Tag), the reader (Reader) and application (Application System) composed of the data stored in the electronic label, and wireless data transmission. The use of RFID technology to replace the traditional engraved nameplate way to improve work efficiency and convenience. In this study, the transformer nameplate of RFID tags, consider the product may face a variety of environmental stresses to the proposed pilot project to test a combination of model and determine the appropriate test parameters. Study reference MIL-STD-105E specifications, to construct a fair income declined as a combination of the criteria allowed to reject the test to determine the reference basis. The results showed that all samples have encountered maintaining good functional operation of the test results judged to acceptance, which means that RFID tags have the appropriate level of reliability and can be imported to the use of the environment. In terms of dust and waterproof test, RFID sample functions can maintain normal operation, but in terms of protective shell, showing water stains and dust infiltration, said inadequate housing protection. In addition, this study burglar alarm module sheath and contained in the ceramic substrate for the strength test, the results show much less than the strength of the ceramic substrate theft sheath strength when subjected to an external force pulling the sheath security, fragmentation of the ceramic substrate will first occur to to ensure that the information stored in the RFID chip is safe, not to theft or tampering.
Huang, Yuan-Hsin, i 黃原新. "Establishment of RFID System on Goods Supply andAssortment Operation for Agricultural Products- AStudy on the Introduction of RFID Managementinto Taiwan’s Flower Auction Market". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/07754790016089220338.
Pełny tekst źródła國立中興大學
生物產業機電工程學系所
96
This study applies the RFID and information transmission equipment for establishing a set of goods supply and assortment system, together with introducing the existing purchase, sales and inventory system in the auction market. The supplier delivers potted plants to the collecting station (or self-delivery to the flower auction market) together with assortment; the purchase statement is then handed to the operator for entering data into the “Original Supply System”. The system will send the purchase data to the designated flower auction market via internet and, at the same time, the Original Supply System will print out RFID Tags, which contain the flower purchase data, via the RFID barcode printer. The operating personnel will then stick the RFID Tags (the tags’ surface contains Code 128 barcode) to the holding plate and the truck will deliver the flowers to the auction market. After off-loading, the assorting personnel in the auction market will retrieve the data in the RFID Tags via a palm RFID Reader with non-touch sensor. The data is then transmitted into the “Server of market-end assortment system” via the wireless access point (AP) and compared with the flower purchase data uploaded by the original supplier. Through this system, accuracy of the supplier’s flower delivery can be effectively ascertained; such method can speed up the purchase and assortment operation in the flower auction market, as well as improve the accuracy of supply data. This will effectively increase the economic benefits of the flower auction market, and improve problems such as delayed operation rising from long collection time and late delivery of suppliers of the auction market.
Cheng, Yin-Chao, i 鄭尹超. "The Application of RFID Sensor to Investigate the Environmental Factors Influencing of Shelf Life for Agricultural Products". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/a9wt8x.
Pełny tekst źródła國立臺北科技大學
工業工程與管理系碩士班
101
While Taiwan’s accession to the World Trade Organization in 2002 had to improve the international competitiveness of Taiwan fruits and after government targeted exports to strategic, the results have been encouraging. According to Agricultural Statistics for 2011 of Council of Agriculture, the value of fruit category exports got greatest growth recently and the value of exports was 2,797,734 tonnes in 2011 Because Taiwan geography location, the agricultural products were trasported by cold chain logistics and Taiwan launched an official reform program for traditional industries in 2013 which will vigorously promote the preservation and traceability of the cold chain logistics during it. Most perishable food was delivered and trasported by cold chain logistics, although it adapated a complete environment monitoring, but it still got 5°C temperature difference with pratice in Taiwan[3][7] and it took 85% time of overall process within 3°C temperature range. It can be seen from the practice, there were some interferences from environmental factors. The purpose of this study is understands the interferences from environmental factors in practice process by RFID sencor tags with SQL then develops a predicte model of shelf life with back-propagation neural algorithm. In this study, it compares the performerce among difference train function as Steepest Descent Method, Steepest Descent Method with momentum and Levenberg-Marquardt (LM), then the Levenberg-Marquardt train function with relevant parameters get a best performerce in finale. RFID food traceability system could not only control production origins but understand their shelf life after cold chian logistic. It increased the added value of RFID traceability system if they can combine the results of this study.
Wang, Ching-Shih, i 王靜詩. "A Study of Implementing RFID-based CPFR Business Process Model-for LCD TV Products in Retailer Company A". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/10717463946122850668.
Pełny tekst źródła大同大學
資訊經營學系(所)
94
This thesis research focuses on restructuring business processes with CPFR(Collaborative Planning, Forecasting, and Replenishment)model and RFID-based data capturing and sharing system for retailer company A and manufacturer B, target to their LCD TV products. This study is trying to reduce the “Bullwhip Effect” generated within the traditional supply chain and enhances the alliance relationship. We expect our RFID-based CPFR model can reduce the uncertainty in the market demand and tightly combine the strategic alliance relationship to win more benefits. Made phone calls and face-to-face interviews with related department managers and operational persons, we created the AS-IS business processes in retailer company A and the process mapping between retailer company A and manufacturer B. Studies on best pilot practices, we constructed CPFR business model in EPCglobal Network™ Infrastructure and elaborated TO-BE business processes between them under the infrastructure. The TO-BE business processes in our paper include five phases: Strategy and Planning Phase, Demand and Supply Management Phase, Delivery Execution Phase, Order Generation/Final Contract Phase, Material/Production Planning and Replenishment Phase. Finally, listing of the performance assessment items should be included for measuring and quantifying the model. The future works are to implement the TO-BE model in retailer company A and collect the performance assessment metrics. When the pilot in our case operates successfully, it is possible to implement to other production lines and stores and to investigate the detail manufacturing business processes on production line at plant.
Wang, Cheng-Yi, i 王正誼. "The Selection of Application in Innovative Products and Key Factors Analysis of Purchasing Decision Making- A Case Study on Active RFID". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/97774574001819885146.
Pełny tekst źródła實踐大學
企業創新與創業管理研究所
99
The RFID (Radio Frequency Identification, RFID) include passive type RFID (Passive RFID) and active type RFID (Active RFID), generally, one of the major differences in the active RFID, the tag powered by battery and its transmission distance is longest, mainly it could be used for tracking people or objects and sensing activity and so on. In this study, the case company which develop active RFID in Taiwan RFID market, and we explore its applications development and the evolution of technology selection during this period, and accorded literature review, to use modified Expert Delphi method to select proper applications in current stage for research, and invite different groups of experts to summarize the key factors, throught AHP analysis the three alternated selection for active RFID system, that we can understand what’s different of decision-making about procurement from different group as industry experts, system integrators ,users and manufactory. Accorded the result of the study , the selections’ limitations and the concerns key factors by the order would be different , but all experts believe UHF solution is the better selection , although the other alternate selection is most advantage in some specific field . In the case, there are varie new applications would be development in the emerging technology of Active RFID, The company may referrd the result of the rearch to develop as a reference for further in other specific application.
GONDEKOVÁ, Renata. "Analýza kontroly jakosti a distribuce výrobků v podniku". Master's thesis, 2008. http://www.nusl.cz/ntk/nusl-44877.
Pełny tekst źródłaChen, Shih-hsien, i 陳世賢. "A Study of Creating Innovative RFID Product Functions". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/66376645628688346951.
Pełny tekst źródła朝陽科技大學
資訊管理系碩士班
97
RFID (Radio Frequency IDentification) techniques have been widely applied in lots of domains in real life. In RFID industry, how to quickly create innovative functions and applications becomes one of important issues. In addition, to identify customer needs is a crucial task for RFID products suppliers. Traditionally, RFID products manufacturers heavily depend on subjective opinions of design engenderers or the specifications of orders to recognize customer preferences. However, customer preferences shift frequently. RFID products manufacturers need a systematic and effective method not to only identify customer needs, but also to create innovative functions for satisfying requirements of different customer segmentations. Therefore, this study proposed a QT-Kano model which combines TRIZ (Theoria Resheneyva Isobretatelskehuh Zadach, Theory for Solving Inventive Problems), QFD (Quality Function Deployment) and Kano model to assist RFID manufacturers in creating innovative functions and categorizing customer needs. Besides, this study also employs refined Kano model to acquire advanced knowledge of customer preferences. Finally, 16 innovative RFID products functions are presented to demonstrate the effectiveness of the proposed QT-Kano model.
Yu, Chong-Hao, i 余崇豪. "The Application of RFID Technology in Product Surveillance". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/3u2dk7.
Pełny tekst źródła國立臺北科技大學
電機工程系研究所
97
RFID and handheld devices have become hot issues in recent years. The application and innovation of RFID have been regarded as one of the most important expanding technologies in the 21 century. The handheld devices can promote trading and competitiveness for an industry when they are combined with the latest wireless communication technology. This research designs a product surveillance system which integrates the RFID and handheld device. The store can do commerce fast and display the products while guests can trade and get commodity information on hand. The surveillance system reports the related information to personnel''s handheld device immediately whenever a burglary is detected. Besides, the proposed system can be applied to supervise property inventory. Based on the experimental results, an alarm signal can be transmitted to store and personnel''s handheld device in a short time (less than 10ms). Even for multiple objects burglary the detection signal is transmitted within 1s. Therefore, the proposed system is not only more effective in handling burglary than the shop owners themselves but also can accurately identify the types and quantities of burglary products. This verifies the feasibility of the RFID technology in designing the product surveillance system.
Chen, Ching-Yu, i 陳璟瑜. "Post-Sale Product Service Tracking System By Using RFID". Thesis, 2005. http://ndltd.ncl.edu.tw/handle/61112425661856221682.
Pełny tekst źródła亞洲大學
資訊工程學系碩士班
94
In recent years, 3C (Computer, Communication, and Consumer Electronics) product demand by customers has shown the tendency of diversification, and relatively, the sales marketing has also expanded multiply. However, the characteristics of 3C product are different from the general commodity, and the demand for after-sales service is more required. In fact in the highly competitive market and product differentiation, it becomes difficult to win in the supply chain only by depending on the price and the specification. How to let customers purchase reliable products and feel easy without worries after sales will gradually become the circumstance of striving to gain customers’ confidence. Nevertheless, on after-sale service, the enterprise mostly still maintained the traditional artificial written work, which causes many problems and inconvenience such as the difficulty for the management of product transaction tracking and tracing, costing more man power and time to control each record for goods inquiry, lacking the suitable diagnose tool, difficulty for service work control, and etc… In order to solve this dilemma on after-sale service of 3C industry, it certainly requires implementing a RFID (Radio Frequency Identification) application. The implementation of RFID system can combine material logistics flow and information flow to record life-span message of the products in detail to increase the visibility and enhance the value of supply chain system. At the same time, the rising and development of the large-scale 3C super center, which will lead to bigger show room, more commodity items, and more complicated working process, will therefore cause the management problem. Nowadays, we consider “Customer Orientation” as the management concept. How to apply and integrate RFID Technology with Sales and Return Service will be the very important subject, which deserves us to further discuss. Hence, this paper will research how RFID is implemented into goods return and after-sales service of 3C industry, and how the service time and work procedure will be improved. In order to constructively present RFID application benefits, we’ll take IDEF0 drawing as the tool to analyze the request and construction of RFID System function. Furthermore, through RFID technology and development of software system together with the combination of database to verify the present working model, the After-Sales Service System after implementing RFID will be compared with system before implementing RFID by using e-EPC process analysis. This way can help us understand the difference between “Before Implementation” and “After Implementation”, and the improvement results.
Su, Yu-Sheng, i 蘇裕盛. "The Research of Product Management in Smart Store Management with RFID System". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/56454091243757150171.
Pełny tekst źródła靜宜大學
資訊管理學系研究所
98
Radio Frequency Identification (RFID) is the communication technology. After several years development, it used in many side of application. RFID mentioned frequently in the localization technology, the animal chip identification, the medical technology and so on, It applied at present focus on supply chain management and the localization technology, uses the domain quite few applications in the smart store, but RFID is worth used in the smart store and the thorough development application. This research inducts the smart store used with the RFID system as well as the comparison smart store and of efficiency variance the traditional bar code type store. The model systems of smart store used by RFID system are staff system, consumer system, stock inventorying, as well as the positioning system, improved positioning time on the positioning system of traditional method. In the future will achieve the collection the information of consumer and to make analysis, will assist the smart store to make business policy.
Ho, Chung-i., i 何忠毅. "Applying RFID technology to build the Process Integration of Product Recovery Information". Thesis, 2005. http://ndltd.ncl.edu.tw/handle/21177476415210421064.
Pełny tekst źródła立德管理學院
科技管理研究所
93
Since the industrial revolution, the necessity of consumer products is getting more and more growth. However, the wastes in the production process are gradually increasing. Hence, such as the EU was forced to develop an environmental protection oriented rule like WEEE&ROHS Directive. There are growing challenges in the environment protection and Product Lifecycle Mangement and leading to the era of the global green competition. On the basis of the goal of development based on enterprises looking for sustainable development not only conform to future development foundation of the environmental protection rules, but also apply to RFID-based information system and characteristic of tracing object. RFID can solve the problem which end-of-life products management system is difficult to collect data. The purpose of this thesis is to discuss the trend of green products, and how we can utilize RFID-based technology to trace object in the way that to improve end-of-life management of products and what is the value of recycled products. Additionally, a new model of recycling products is build to meet the WEEE&ROHS directive. Firstly, reviewing research papers, the research focuses the roles of information associated with those products collected across end-of-life products, the process of product recovery operations, and the feasibility way that RFID-based product identification techonologies could bring towards the process of product recovery operations, in addition, to point out what is the appropriate conclusion and suggestion. Finally, to get more valuation of production and duty of environmental protection, the lifecycle of production from material to the end has strict management methods, evaluation of procedures, improvement ways to make the quality of products recovery better.
傅達文. "Strategic Analysis and Performance Audit of New Product Development-A Case Study on RFID". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/97371935514958171917.
Pełny tekst źródłaShr-Chang, Chiou, i 邱士昌. "Production and marketing work of the Agricultural product combing Ant Colony System with RFID". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/86775765365051357480.
Pełny tekst źródła立德大學
資源環境研究所
97
Taiwan is the country which sets up the nation based on agriculture, But along with era of knowledge economy oncoming, As well as under agricultural production liberalization of trade tidal current, The domestic market spills into the overseas inexpensive agricultural product massively, Substitution domestic product agricultural product percentage, The domestic related agriculture has faced the enormous pressure, In this stern environment condition, The traditional farming like wants to maintain continues forever to develop, then must break through the unprecedented difficult position by the high style thought that, And most must adjust the change nothing but is the agricultural product transportation and sale organization and the structure. Base this research will use the wireless radio frequency identification system, Its convenience, rapid and the being unable robber beats potency of the imitation to take the agricultural product production and marketing work the control tool. Moreover using the ant group optimization calculation method, it has again may search for function of the optimal path to plan the agricultural product allocation route, After anticipating our country agricultural product to be able the affiliation from this system model utilization, but has the competitive power. In the article carries on the confirmation take the Shihu Township Changhua County kyohou Grape transportation and sale work as the example, Demonstrated by the findings, this article develops the agricultural product transportation and sale manages the work system and the tradition operating type comparatively speaking can save more manpower and the time, and enhances transportation and sale's accuracy.
Hsieh, Pei-Jung, i 謝佩蓉. "Electronic product lifecycle management and reverse logistics network design based on RFID for mobile phones". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/88432841693445118447.
Pełny tekst źródła國立交通大學
交通運輸研究所
97
With the limitation of environmental regulations, companies need to focus on product lifecycle management. Members including suppliers, manufacturers, retailers, consumer, and third party logistics with whole mobile supply chain can cooperate to improve product lifecycle management by RFID technology. In this study, product lifecycle management based on RFID is one of the issues to address mobile phone’s lifecycle management, and the other one is reverse logistics network design based on product lifecycle information from RFID. The results of this research are following points: (1) Companies can collect information by developing mobile phone lifecycle management and share information to members. (2) RFID technology can improve mobile phone reverse logistics activities from handle cost, facilities capacity and return quality. (3) The model in this study is different on handle activities, and output cost decreases by RFID.
Huang, Yu Wei, i 黃毓瑋. "Implementing a Product Traceability System by Using RFID and Barcode – A Case Study of 3C Industry". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/69854908712953647192.
Pełny tekst źródła亞洲大學
資訊工程學系碩士班
96
The startling safety issues of consumer’s products have occurred such as ox madness disease in America and Europe , the forge certificates of origin of Seichun beefs in Japan, the medicine residues in the agricultural and fishing products, the clothes formaldehyde residues in the towels and clothes, and the battery explosion during charging have caused the consumers to suspect the safety of consumer’s goods. Due to the consumption consciousness emphasis today and the consumers pursuing the quality of goods, therefore it will become the important topics of suppliers such as how to improve the transparency of goods’ quality and how to further reduce consumers' doubt. Production traceability of products can trace the processes of goods from production to consumption and the sources of products, and therefore it becomes a hot research in recent years. This research will implement an information system platform of goods through which let suppliers and their customers can track from parts in the up stream to products in the down stream, or products can be traced back backward to spare parts, and consumers’ confidence in products can be built to reduce the doubt of the products’ original sources by utilizing technology such as Barcode, RFID, SQL database and ASP.NET 2.0 and taking 3C industry supply chain as an example.
江承澤. "Study on System Integration of RFID Technology and Electronic Product Pedigree Applied in Supply Chain Management". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/86850970141826708654.
Pełny tekst źródła明新科技大學
工業工程與管理研究所
100
Radio Frequency Identification (RFID) technology applied in issues of supply chain information sharing is wider discussed recently. Electronic Product Code (EPC) and EPC Network architecture is getting more maturity in the related applications of supply chain. Electronic product pedigree, to resume the retrospective for the bulk product, is the typical RFID application in supply chain management. Recently, the government in Taiwan promotes applications in food industry especially, for purpose of hygiene and safety requirements. During the time to encounter the events of adding "plasticizers", it’s clear to realize the importance of related issues. The major topics investigated are: 1. follow the EPC Network specifications to trace product resume, 2. Electronic Product Code format transformation, 3. design an electronic pedigree prototype system, 4. provides an empirical demonstration of RFID applications. Through the literature review, we are going to explore issues about the theory, architecture and specifications of RFID and EPC. Survey the system architectures of electronic product pedigree based on related papers studied in depth. By using the existing RFID equipments, both software and hardware, in commerce automation laboratory, we are going to design an empirical application prototype with RFID technology for food product pedigree, which helps us to catch the practical concerns in electronic product pedigree system design.
Hsyu, JenJan, i 徐建楨. "The Research of RFID Application in Innovative Product Design and Development – An Example of Banking Passbook system". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/77012849610500588672.
Pełny tekst źródła國立臺北教育大學
數位科技設計學系(含玩具與遊戲設計碩士班)
100
This research tries to assess if the magnetic read/write head devices conventionally used in the banking industry, particularly in the passbook system involving passbooks and passbook printers, can be replaced by an RFID system comprising RFID readers and RFID tags. A feasibility evaluation is performed using existing passbook printers, passbooks, RFID readers and RFID tags. This study also analyzes the pros and cons of the RFID read/write system by comparing its features, types, prices, functions, specifications, etc. with those of the magnetic read/write head system. Now that IC-based banking cards have superseded those based on magnetic stripes, and thanks to the RFID technology, the applications of EasyCards in Taiwan have moved beyond the Metro system to the banking and medical systems, it is further discussed in this study whether the successful operations of such smart cards will lead to a revolution of the traditional magnetic-read/write-head passbook system. Although the declining prices of HF RFID tags still cannot compete with those of magnetic stripes, the trend is indisputably moving from magnetic to RFID. However, total substitution is unattainable unless all passbook printer suppliers introduce the RFID technology into the existing hardware and software structures of passbook printers and all passbook suppliers provide passbooks integrated with RFID tags. In addition, total support from the government and the banking system is crucial to the successful transition between the two systems, and this support is what we are looking forward to after we come to the positive conclusions of this study. Keywords: Reader, Tag, Passbook, ATM, Antenna, Collision, Authentication