Gotowa bibliografia na temat „RFID Modules”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „RFID Modules”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "RFID Modules"

1

Węglarski, Mariusz, Piotr Jankowski-Mihułowicz, Kazimierz Kamuda, Patryk Pyt, Grzegorz Pitera, Wojciech Lichoń, Mateusz Chamera i Cezary Ciejka. "RFID Sensors for Monitoring Glazing Units Integrating Photovoltaic Modules". Energies 15, nr 4 (15.02.2022): 1401. http://dx.doi.org/10.3390/en15041401.

Pełny tekst źródła
Streszczenie:
The paper focuses on the synthesis of semi-passive RFID transponders-sensors that are intended to integrate with active glazing units with built-in photovoltaic cells. The main purpose of the designed construction of the UHF RFID device is to provide diagnostic information in the monitoring system of a photovoltaic micro-power plant. Furthermore, the RFID sensor is aimed at being implemented at various stages of the product life cycle: production, distribution, storage, installation, common operation, service/maintenance and disposal. In the presented research work, particular attention is paid to several aspects of the RFID sensor synthesis: use of the energy, generated periodically in the PV cells, to power the monitoring device that has to act permanently; specification of the PV module parameters that have to be monitored in the diagnostic process; implementation of data acquisition and energy management models in an electrical circuit; wireless data transfer to the master unit (monitoring host), even in the absence of power supply (e.g., module damage, blackout), using a standardized communication protocol IEC 18000-63 used in the RFID technology; and the design of the antenna system taking into consideration limitations of electronic technology and the material properties of substrates and glasses used in PV modules and RFID sensors. Based on the results of the investigations, the modular structure of the RFID sensor demonstrator is proposed. Moreover, several diagnostic scenarios are analyzed in detail. On the basis of the provided considerations, it is shown that in order to find a malfunctioning component, it is enough to compare the voltages on the photovoltaic modules that are in the close vicinity.
Style APA, Harvard, Vancouver, ISO itp.
2

Rahman, Sepsa Nur, i Eva Rianti. "PERANCANGAN SISTEM INFORMASI MEDIA BELAJAR PADA SISWA SEKOLAH DASAR BERBASIS RFID". Jurnal Teknologi Informasi dan Pendidikan 10, nr 2 (2.06.2017): 13–24. http://dx.doi.org/10.24036/tip.v10i2.28.

Pełny tekst źródła
Streszczenie:
This study was conducted to make RFID applications as learning media information System in primary school students. This system is made by designing, making and implementing the components of the system which includes a microcontroller as process controllers, sound modules WTV as output which wil lgenerate. This system also uses RFID as input, where before the tool RFID function should be brought closer to the first RFID TAG and its output on the LCD. The results show a tool created to function properly and can be developed to a larger scale. Keywords : RFID, Sensors, Arduino, Sound Module ISD020
Style APA, Harvard, Vancouver, ISO itp.
3

Rafif Muhammad Irdian, Rafi Fredy Septianto i Aksen Winarto. "APPLICATION OF INTERNET OF THINGS BASED ROOM SECURITY SYSTEM USING ANDROID APPLICATION". Jurnal Cakrawala Ilmiah 1, nr 4 (7.01.2022): 841–46. http://dx.doi.org/10.53625/jcijurnalcakrawalaindonesia.v1i4.1026.

Pełny tekst źródła
Streszczenie:
Along with the increasing crime rate of data theft that occurs, it takes a good room security system to maintain data security for a particular agency or organization. Something A good security system is a security system that can be monitored and controlled remotely using the internet or better known as IoT (Internet of Things). In this thesis will designed an IoT-based room security system using the Android application, this system works using several modules including RFID (Radio Frequency Identification) module, camera module and door lock solenoid. The RFID card in this RFID Module functions as an identification process for people who want to enter into the room. In addition, this RFID module also functions as a trigger for the camera to work to take pictures a picture of the person who wants to enter the room. The data obtained from the two modules later will be sent into the Android application. The admin of the room can carry out the verification process to allow or deny people who want to enter the room. The results of testing this system can be runs well when the internet speed of the access point is fast and stable, but less optimal when the internet speed of the access point is running slowly.
Style APA, Harvard, Vancouver, ISO itp.
4

Limas Ptr, Agus Fahmi, B. Herawan Hayadi i Gilang Prayatna. "Sistem Keamanan Ruang Server BHS (Baggage Handling System) Kualanamu Berbasis IoT". Jurnal MESIL (Mesin Elektro Sipil) 3, nr 1 (20.06.2022): 22–30. http://dx.doi.org/10.53695/jm.v3i1.695.

Pełny tekst źródła
Streszczenie:
Along with the increasing level of criminal data theft that occurs, a room security system is needed that good for maintaining information security of a particular agency or organization. A good security system is a security system that can be monitored and controlled remotely using the web or better known as IoT (Internet of Things). In this research, a language room security system (baggage handling system) will be designed. Kualanamu airport based on IoT using an android application, this system works using several modules including an RFID (Radio Frequency Identification) module, a camera module and an entrance lock solenoid. The RFID card in this RFID module functions as a process of identifying people who want to enter the room. In addition, this RFID module also functions as a trigger for the camera to work to take pictures of people who want to enter the room. The information obtained from both modules will be sent to the Android application. Room administrators can carry out a verification process to allow or deny people who want to enter the room. The test results of this system can run well when the web speed of the access point is fast and stable, but less than ideal when the web speed of the access point is slow.
Style APA, Harvard, Vancouver, ISO itp.
5

Xu, Li Yan, Ling Ling Sun, Zhi Hua Xiao i Fei Yue Hu. "UHF RFID Reader Implementation for EPC C1G2 Protocol". Advanced Materials Research 219-220 (marzec 2011): 1608–11. http://dx.doi.org/10.4028/www.scientific.net/amr.219-220.1608.

Pełny tekst źródła
Streszczenie:
UHF RFID system has been mainly used in logistics,production and supply chain management. The implementation of UHF RFID reader with excellent performance is still challenging. This paper presents a UHF RFID reader implementation for EPC C1G2 protocol. EPC C1G2 physical layer architecture and some critical modules like encoder ,decoder, modulator and demodulator are described in details. All modules are verified in FPGA and the experiments demonstrate that the designed RFID reader baseband system could perform well.
Style APA, Harvard, Vancouver, ISO itp.
6

Tan, Hui. "Application of RFID System in Manufacturing Production Control". Advanced Materials Research 503-504 (kwiecień 2012): 52–55. http://dx.doi.org/10.4028/www.scientific.net/amr.503-504.52.

Pełny tekst źródła
Streszczenie:
Aimed at the characteristic of manufacturing, it analyses application demands of RFID technology in manufacturing production, expatiates the operational principles of applying RFID technology in the manufacture industry to improve production efficiency in details. Through integrated application, which based on RFID technology, network technology and wireless communication technology, a structure of RFID application system, facing the management of production has been established for enterprises. Functional modules of the application system have been described according to the design requirements.
Style APA, Harvard, Vancouver, ISO itp.
7

Li, Zhe Kun, Min Li i Fu Yu Li. "Intelligent MES Based on RFID". Key Engineering Materials 407-408 (luty 2009): 194–97. http://dx.doi.org/10.4028/www.scientific.net/kem.407-408.194.

Pełny tekst źródła
Streszczenie:
By taking the advantages of RFID (Radio frequency identification) technology, this paper consequently raises an idea of applying RFID into MES (Manufacturing Execution System), establishing the modules concerning MES onsite-material management and monitoring of manufacturing, and studying how to construct Intelligent MES.
Style APA, Harvard, Vancouver, ISO itp.
8

Jankowski-Mihułowicz, Piotr, Mariusz Węglarski, Wojciech Lichoń, Mateusz Chamera, Patryk Pyt i Cezary Ciejka. "Synthesis of Antennas for Active Glazing Unit with Photovoltaic Modules". Energies 14, nr 20 (14.10.2021): 6632. http://dx.doi.org/10.3390/en14206632.

Pełny tekst źródła
Streszczenie:
The problem considered in the paper concerns the synthesis process of antennas for autonomous semi-passive RFID transponder/sensors dedicated to active glazing units. Glazing units are frequently used in modern multi-storey buildings to create amazing facades. When they are integrated with photovoltaic (PV) modules, active units are obtained. It is desirable, mainly for economic reasons and in order to ensure the high efficiency of a micro-photovoltaic power plant, that active glazing units are equipped with a system for monitoring their operating parameters. In connection with this, design problems occur that fall within the fields of sensor technology and radio communications. The main purpose of the presented study was to prepare appropriate input data for design tools used in the synthesis of antenna systems in the UHF band. Many important issues are considered including: proximity to structural elements of the building facade and PV cells, which disturbs the shape of the radiation pattern and affects the impedance parameters of the antenna system; the need to ensure easy integration of the RFID sensor and the specified object, without significant interference in the production of glazing units; appropriate shaping of the radiation pattern in order to enable reading and writing of the RFID tag from both inside and outside the building; impedance matching to the selected RFID chip in the broadest possible frequency range, etc.
Style APA, Harvard, Vancouver, ISO itp.
9

Liu, Min, Yi Hua Feng, Geng Lei Zhong i Guang Jie Du. "The Design of Cigarette WMS Based on RFID". Advanced Materials Research 712-715 (czerwiec 2013): 2991–94. http://dx.doi.org/10.4028/www.scientific.net/amr.712-715.2991.

Pełny tekst źródła
Streszczenie:
This paper proposes a design of cigarette WSM (Warehouse Management System) which is based on RFID by analyzing the workflow of the system. The architecture and some function modules of the cigarette warehouse management which are based on computer network, Software development and RFID technology are discussed.
Style APA, Harvard, Vancouver, ISO itp.
10

Yuan, Cheng Fen. "Research on the Development of Smart Library Based on Embedded RFID Middleware". Advanced Materials Research 926-930 (maj 2014): 2410–13. http://dx.doi.org/10.4028/www.scientific.net/amr.926-930.2410.

Pełny tekst źródła
Streszczenie:
This research is mainly designed and implemented the RFID middleware based on embedded Linux system. This middleware uses compositive control framework for design and development, by doing this, it makes middleware function modules can be dynamically loaded, installed and uninstalled by plug-in application form, witch will improve the flexibility and stability of the use of the RFID middleware. In the complex event processing, the paper introduced Esper engine to promoted the ability to filter, analyze, aggregate and some other complex event processing to dulling with the tagged data. This paper realized the main function module design by strictly compliance with the ALE protocol witch is made by the EPC Global Organization. The RFID middleware in this article establish the interactive interface with the external application. This middleware application can be deployed on the embedded Linux system, and it has obtained the expected effect and function after the test of this middleware application.
Style APA, Harvard, Vancouver, ISO itp.

Rozprawy doktorskie na temat "RFID Modules"

1

Basat, Sabri S. "Design and Characterization of RFID Modules in Multilayer Configurations". Thesis, Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/14070.

Pełny tekst źródła
Streszczenie:
Radio Frequency IDentification (RFID) Tags have become quite widespread in many services in the industry such as access control, parcel and document tracking, distribution logistics, automotive systems, and livestock or pet tracking. In these applications, a wireless communication link is provided between a remote transponder (antenna and integrated circuit (IC)) and an interrogator or reader. A suitable antenna for these tags must have low cost, low profile and especially small size whereas the bandwidth requirement (few kilohertz to megahertz) is less critical. In this document, methods to reduce tag size, the performance optimization of the tag by using novel antenna matching techniques for increased operational bandwidth and gain/radiation pattern/radiation efficiency improvement are introduced for 13.56 MHz HF and 915 MHz UHF RFID tags.In addition, an evaluation of an active 915 MHz UHF RFID field study for container tracking at the port of Savannah, GA is also presented.
Style APA, Harvard, Vancouver, ISO itp.
2

Nasri, Nejah. "Étude, simulation et caractérisation électronique et protocolaire de modules RFID dédiés à une communication en milieu aquatique". Toulouse 2, 2010. http://www.theses.fr/2010TOU20093.

Pełny tekst źródła
Streszczenie:
L’originalité de notre étude concerne la proposition, la simulation et la caractérisation d’une chaîne d’identification utilisant le médium acoustique. De manière globale, le travail attendu consiste à développer une plateforme de communication RFID (Radio Frequency IDentification) dont les couches physiques et protocolaires seront adaptées à une transmission en milieu aquatique. Les domaines d’application sont riches et multi domaines, tant au niveau maritime (détection et suivi de pollution, d’animaux sous-marins) que grand public (surveillance intelligente de piscine)
The originality of our study concerns the proposal, simulation, and characterization of an identification system using the acoustic medium. Overall, the expected work is to develop an RFID (Radio Frequency Identification) communication platform whose physical layer and protocol will be adapted to a transmission in aquatic environments. The application areas are rich and multi domains, both at sea level (detection and monitoring of pollution, underwater animals) and public (intelligent monitoring)
Style APA, Harvard, Vancouver, ISO itp.
3

Rida, Amin Hassan. "Integrated RF modules and passives on low-cost flexible materials for applications up to the mm-wave frequency range". Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/39552.

Pełny tekst źródła
Streszczenie:
The objective of the proposed research is to develop solutions for High-Performance Low-Cost Passives for Radar, Identification, and Communication Applications up to mm-Wave Frequencies. This research will bring to the table potential solutions that will meet three main requirements: small size (or low weight), high performance, and low cost. This research embarks on antenna design and development for passive RFID tags on LCP substrates, and then a transition towards lower cost modules investigates and explores the possibilities of using paper as RF substrates with inkjet printing as a low cost fabrication technology. Modules such as dual band antenna for Wifi frequencies (2.4 GHz and 5 GHz) and UWB (up to 10GHz) on paper substrate using inkjet printing are presented. This work then bridges into developing higher frequency modules. These include: highly selective filter design on LCP for X-band Radar application to be used as a benchmark for an easy adjustment for higher frequencies, and antenna modules LCP using inkjet printing for communication such as mm-Wave WLAN or WPAN. A transition into mm-Wave Modules then takes place for the general realization of low-cost high-performance mm-Wave modules and more specifically the low cost automotive radar. After proposing an architecture for integrated mm-Wave module, this work then investigates 2D/3D interconnections (and their integration with antennas) on LCP using conventional etching design guidelines up to 100GHz. Antenna arrays that are implemented with phase shifters for beam steering are then designed using edge fed and multilayer technology. Furthermore, crosstalk reductions for highly dense transmission lines are analyzed via simulations for the optimum performance and space saving of such mm-Wave modules such as the IC interface where space restrictions are strictly enforced.
Style APA, Harvard, Vancouver, ISO itp.
4

Kumža, Mantas. "RFID technologijų panaudojimas gamybos kokybės valdyme". Master's thesis, Lithuanian Academic Libraries Network (LABT), 2007. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2007~D_20070816_144255-99814.

Pełny tekst źródła
Streszczenie:
Gamybos pramonės sektorius apima viena iš didžiausių ir pelningiausią rinkos sektorių pasaulyje. Norėdamos išlikti ir sėkmingai dirbti besikeičiančios konkurencinės rinkos sąlygomis, įmonės neišvengiamai susiduria su konkurencinio pranašumo didinimo poreikiu. Tuo tikslu yra kuriamos veiklos vystymo strategijos, taikoma naujų technologijų diegimas, verslo valdymo procesų tobulinimas, produktų kokybės didinimas, valdymas, kokybės reikalavimų ir standartų taikymas. Vienas iš gamybos kokybės proceso optimizavimo sprendimas gali būti RFID technologijos pritaikymas gamybos veiklose. RFID yra viena naujausių ir besivystančių technologijų, kuri pasaulyje yra pritaikoma ir naudojama įvairiose srityse. Įgyvendintas projektas ir jo pasakoje sukurta RFID sistemos modulis, bei priemonės gali būti naudojamos, ne tik su užsakovo UAB „RTech“ plėtojama „QMS“ (Quality Management Systems) programinę įrangą, bet ir kaip sąsaja tarp RFID įrangos ir vartotojo veiklos taikomosios programos. Panaudojus RFID technologas ir sąsajas su RFID technologijomis galima: • dalinai automatizuoti gamybos kokybės valdymo procesą, • padidinti efektyvumą gaminio atsekamume, • sumažinti broko kontrolę tiekiant gaminius užsakovui. Šio darbo vienas iš tikslų yra įvertinti sukurta sistemą ir ką būtu galima patobulinti, kad būtų galima padaryti lankstesne pritaikant darbui su kitomis programinės įrangos sistemomis. Darbo metu yra tiriami ir analizuojami ISO standartų RFID sistemų modeliai, bei jų pritaikymo galimybės... [toliau žr. visą tekstą]
Manufactory industry is the most profitable sector of world’s market. Companies confronts with competitive market advantages to keep working successfully in continually changing market conditions. Therefore activities development strategies are created, new technologies are used in installation process, perfection of business control process, increasing quality of products, use of standards and quality requirements. The solution of these problems can be use of RFID (Radio Frequency Identification) technologies in manufacture management process. RFID is an automatic identification technology that relies on cheap tags (transponders) that can be attached to objects and storage information on it. The results of this project are RFID systems components witch can be used with other users applications such as „QMS“ (Quality Management Systems) of “RTech” company or other users applications. The successful integration of RFID technologies in manufacture quality management process can give effect in: • Automate and computerize manufacture quality management process; • Increase efficiency of product traceability system process; • Reduce rejects on product supply for consumer’s process. One of the master’s work goals is to evaluate the system, which was created in this work. The system can be improved by ISO standard models and made more flexible to use it for other works.
Style APA, Harvard, Vancouver, ISO itp.
5

Petrušek, Marek. "Přístupový bezpečnostní systém mobilního zařízení na principu RFID". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230959.

Pełny tekst źródła
Streszczenie:
This thesis discusses the model of security access with the use of microcontroller and RFID reader.The model is designed for utilization in automobiles,in which it will have the properties of a an immobilizer and also the function of saving the time and ID of the chip in use.For application in automobiles the minimalization of consumption of the mobile device is also described.This thesis is a part of project IGA VUT Brno,FSI-S-11-31,Application of artificial intelligence methods.
Style APA, Harvard, Vancouver, ISO itp.
6

Jia, Rui S. M. Massachusetts Institute of Technology. "Implementation of RFID in a low volume high flexibility assembly plant : module component tracking". Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/62499.

Pełny tekst źródła
Streszczenie:
Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2010.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 86-89).
The purpose of this thesis is to help Varian Semiconductor Equipment Associates, Inc. (VSEA) to smooth the production and reduce the manufacturing cost. Without an efficient way to track on its high-value components, VSEA thereby spends hundreds of thousands of dollars to respond to customers' fraudulent claims and adds extra burdens to manufacturing teams. RFID system is introduced to improve the traceability of high-value components. By physically applying a RFID tag on a component and associating the tag with necessary information of the component, VSEA is able to avoid accepting a fraudulent claim by providing reliable and accurate record for a particular component. After testing different types of RFID tags and various checking system setups, the RFID system is verified feasible to be implemented in the high-value component tracking. Specially, a guideline of tag placements on different components is generated for reference in further implementation.
by Rui Jia.
M.Eng.
Style APA, Harvard, Vancouver, ISO itp.
7

Al-Ashraf, Samir Daniel, i Arban Sefedini. "Prototyper för NFC implementeringar". Thesis, Malmö högskola, Teknik och samhälle, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20545.

Pełny tekst źródła
Streszczenie:
Near Field Communication (NFC) är en trådlös kommunikationsteknik för korta avstånd, vanligast med cirka 10 cm vilket medför en säkrare förbindelse. NFC är en relativt ung teknologi som är billig att implementera samt användarvänlig. NFC är lämpad främst för mobiltelefoner där en bred implementering av applikationer är möjlig. Tekniken medför snabbare och enklare utbyte av information genom att ställa enheter sida vid sida. I dagsläget används tekniken mest i Asien. I Europa har ingen stor satsning påbörjats än, men den är på väg. I framtiden förväntas det att NFC kommer att finnas i de flesta mobiltelefoner.Denna uppsats behandlar praktisk implementering av en ”verktygslåda” med NFC teknologi. Målet är att skapa en ”verktygslåda” med olika komponenter. ”verktygslådan” är tänkt att användas som grundskelett för implementering av NFC applikationer och för experiment med de olika komponenterna. Hårdvarukomponenterna består av mobiltelefon, tagg, RFID läsarmodul och mikroprocessor. Programvarukomponenterna består av ett antal kodexempel.Vårt arbete har resulterat i tre prototyper som tillsammans utgör ”verktygslådan”. I prototyperna sker kommunikation mellan en kombination av komponenter i ”verktygslådan”: mobiltelefon och tagg, läsare och tagg samt läsare och mobiltelefon.
Near Field Communication (NFC) is a contactless short distance (approximately 10 centimeters) communication technology, which conveys a more secure connection. NFC is a relatively young technology which is cheap to implement, and user-friendly. NFC is directed to mainly cellphones, where opportunities for implementation of applications are wide. The technology conveys a faster and easier exchange of information, by putting units side by side. At present, the technology is used mostly in Asia. In Europe, no major effort has begun yet, but is expected to. NFC is expected to exist in a majority of cellphones, in the future.This essay treats practical implementation of a “toolbox” with the NFC technology. The goal was to make a “toolbox” with different components. The “toolbox” is intended as a base for implementing NFC applications and for experimenting with the different components. The hardware components are: cellphone, a tag, a RFID module and a microprocessor. The program components consist of a number of code examples.Our work has resulted in three prototypes which together constitute a “toolbox”. The prototypes communicate between any combinations of the components in the “toolbox”: cellphone with tag, reader with tag and reader with cellphone.
Style APA, Harvard, Vancouver, ISO itp.
8

Bugár, Loránt. "Vestavný systém s komunikačním rozhraním NFC a Wi-Fi". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-240926.

Pełny tekst źródła
Streszczenie:
This master’s thesis deals with communication system design via the NFC and Wi-Fi interface. The thesis has two basic goals. The first goal is to create a device that is capable of storing of data and its subsequent transfer via the NFC interface. The second aim is to utilize this device for measuring various physical variables. The IoT technology is employed to fulfill the aforementioned goal. IoT technology is capable of visualizing data in real time and make them accessible via the Internet. The result of this work is an universal device, that contains the most popular communication interfaces, such as I2C, SPI and that is capable of processing measurement data from digital, analogue, and wireless sensors.
Style APA, Harvard, Vancouver, ISO itp.
9

Chen, Pi-Hsin, i 陳丕欣. "Reliability analysis and evaluation for RFID modules of transformers". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/24186218574450695962.

Pełny tekst źródła
Streszczenie:
碩士
國立勤益科技大學
機械工程系
102
The RFID technology for distribution transformers is that writing the basic information on the plate of a device into the RFID tag and read the data stored in the tag out via the RFID reader so as to establish the management and control mechanism for equipment in/out factory and a premium model of equipment supply and material management . Because of the variety of the working circumstance , all the RFID modules need to accept the parts/modules level reliability test and lifetime prediction test so as to assure the modules can correctly perform the designed functions under the prescribed time duration and circumstance stresses . Therefore , this study entrusted ARTC to do the reliability evaluation and accelerated lifetime tests for the developing stage RFED samples . The results were analyzed to know the average lifetime and failure modes of the modules. Furthermore , possible causes of the failures were studied that offers the R&;D staffs as references for system design , parts selection so as to improve the reliability , quality and function of the RFID modules. Based on the test results, the RFID modules have excellent reliability that includes climate resistance and mechanical stress properties. The estimated lifetime is 167,184 hours.
Style APA, Harvard, Vancouver, ISO itp.
10

Liou, Gang-Sin, i 劉岡鑫. "A High Performance Design for Active RFID Module". Thesis, 2006. http://ndltd.ncl.edu.tw/handle/62856443420581617029.

Pełny tekst źródła
Streszczenie:
碩士
國立高雄第一科技大學
電腦與通訊工程所
94
Abstract Microstrip planar antennas are popular in recently because of its compactness and fabrication easily, and it integrates with circuits easily. In this thesis, we design several conventional macrostrip antennas and a two-stage low noise amplifier (LNA) which are reported to fit with 2.4GHz ISM band or 2.45GHz active RFID system. For the low noise amplifier, it exhibits low voltage, low noise, and high gain. And then, we integrate the microstrip antenna and low noise amplifier into a active RFID module. In addition, a novel design of active RFID module is developed. It shows the wideband frequency response is between 2.2 to 2.5 GHz when return loss less than -10dB. Moreover, the maximum antenna gain is larger than 4 dBi. In particular, we have obtained the total gain about 19 dBi in the antenna and active circuit possessing low noise amplifier (LNA), and the result is very simple impedance matching and simple mechanical construction. The reports of such experiments are presented in this thesis.
Style APA, Harvard, Vancouver, ISO itp.

Książki na temat "RFID Modules"

1

The Benefits of RFID readers for Industry 4.0 applications and RFID Modules. iDTRONIC Professional RFID, 2023.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Erforschung der Anwendungen von eingebetteten RFID-Modulen in Zugangskontrollsystemen zur Erhöhung der Sicherheit. idtronicrfiddeweb, 2024.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Leveraging RFID Readers And Modules For Enhanced Efficiency In Industry 4.0. idtronicrfidweb, 2024.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Exploring the Applications of Embedded RFID Modules in Access Control Systems to Enhance Security. idtronicrfidweb, 2024.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Die Vorteile von RFID-Lesegeräten für Industrie 4.0-Anwendungen und RFID-Modulen. iDTRONIC Professional RFID, 2023.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Einsatz Von RFID-Lesegeräten Und -Modulen Für Mehr Effizienz In Der Industrie 4.0. idtronicrfiddeweb, 2024.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "RFID Modules"

1

Ahmadi, Candra, Wirarama Wedashwara, Ni Nyoman Harini Puspita i Jiann-Liang Chen. "IoT-Based Smart Village Transaction System Using RFID and Load Cell Modules". W Proceedings of the First Mandalika International Multi-Conference on Science and Engineering 2022, MIMSE 2022 (Informatics and Computer Science), 341–51. Dordrecht: Atlantis Press International BV, 2022. http://dx.doi.org/10.2991/978-94-6463-084-8_29.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Qin, Zhongyuan, Yongxin Zheng, Yuying Wang i Jie Huang. "RFID Tag Anticollision Scheme Using Modular Arithmetic". W Advances in Intelligent Systems and Computing, 325–32. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-1759-6_39.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Vivek Raj, K., N. Navya, P. Madhushree, K. Anjali i B. Soundarya. "RFID-Based Secure Multipurpose Smart Card Using Arduino Module". W Advances in Intelligent Systems and Computing, 403–15. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7330-6_31.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Jian, Ming-Shen, Jun-Hong Shen, Ming-Sian You, Yu-Siang Huang i Yu-Syuan Liou. "RFID Based Modular Clerk Management System in Cloud". W Lecture Notes in Electrical Engineering, 155–61. Dordrecht: Springer Netherlands, 2015. http://dx.doi.org/10.1007/978-94-017-9558-6_19.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Li, Chao, i Yu-lin Zhang. "Design and Realization of Encoding Module for UHF RFID Based on FPGA". W Communications in Computer and Information Science, 117–21. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-02342-2_16.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Juraboev, Abduaziz, Sebastian Suess, Rüdiger Kern i Joaquín Díaz. "Embedding RFID Tags into Modular Textile Floor Coverings and Integration in BIM". W Lecture Notes in Civil Engineering, 137–46. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-44021-2_15.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Gao, Wenjun, Weisheng Lu i Liupengfei Wu. "RFID-BIM-Enabled Reuse of “Fangcang Shelter Hospitals” Modular Components During the Post-Covid-19 Era". W Proceedings of the 27th International Symposium on Advancement of Construction Management and Real Estate, 379–88. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3626-7_30.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Nejah, Nasri, Kachouri Abdennaceur, Andrieux Laurent i Samet Mounir. "Electronic and Mac Protocol Characterization of RFID Modules". W Radio Frequency Identification Fundamentals and Applications Bringing Research to Practice. InTech, 2010. http://dx.doi.org/10.5772/7989.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Choi, S. H., H. H. Cheung, B. Yang i Y. X. Yang. "Item-Level RFID for Retail Business Improvement". W RFID Technology Integration for Business Performance Improvement, 1–26. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-6308-4.ch001.

Pełny tekst źródła
Streszczenie:
This chapter proposes an item-level RFID-enabled store management system to help improve retail business. The system adopts an integral design approach to exploit RFID and the e-pedigree established for anti-counterfeiting and tracking of product items in a supply chain. Various modules, such as back-store inventory, smart shelves, interactive mirrors and fitting, and self-checkout services, can be subsequently implemented for retail operations and management. Features for anti-counterfeiting and individual customer marketing can also be incorporated to enhance brand image and customer experience. Moreover, intelligent algorithms may be integrated to mine useful information, such as the sales history of products and the shopping behaviour of customers from the data captured by the RFID devices to facilitate business decision-making and proactive individual marketing. As such, the efficiency of store operations and the overall retail business can be expected to improve substantially. The chapter presents the design approach of the proposed system and discusses some implementation issues, exemplified by two basic applications: (1) track-and-trace anti-counterfeiting to prevent injection of faked products into the back-store inventory and (2) smart product collocation to promote individual customer marketing and cross selling.
Style APA, Harvard, Vancouver, ISO itp.
10

Djenouri, Djamel, ElMouatezbillah Karbab, Sahar Boulkaboul i Antoine Bagula. "Networked Wireless Sensors, Active RFID, and Handheld Devices for Modern Car Park Management". W Securing the Internet of Things, 1012–24. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9866-4.ch045.

Pełny tekst źródła
Streszczenie:
Networked wireless sensors, actuators, RFID, and mobile computing technologies are explored in this paper on the quest for modern car park management systems with sophisticated services over the emerging internet of things (IoT), where things such as ubiquitous handheld computers, smart ubiquitous sensors, RFID readers and tags are expected to be interconnected to virtually form networks that enable a variety of services. After an overview of the literature, the authors propose a scalable and lowcost car parking framework (CPF) based on the integration of aforementioned technologies. A preliminary prototype implementation has been performed, as well as experimentation of some modules of the proposed CPF. The results demonstrate proof of concept, and particularly reveal that the proposed approach for WSN deployment considerably reduces the cost and energy consumption compared to existing solutions.
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "RFID Modules"

1

Tentzeris, M. M., A. Traille, L. Yang, V. Lakafossis, R. Vyas, A. Rida, A. Haque i D. Staiculescu. "RFID-enabled biosensing wireless modules". W 2009 IEEE Radio and Wireless Symposium (RWS). IEEE, 2009. http://dx.doi.org/10.1109/rws.2009.4957302.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Dhauta, Shallu, i Shashank Kapoor. "Interactive intellegent shopping cart using RFID and ZIGBEE modules". W 2017 International Conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud) (I-SMAC). IEEE, 2017. http://dx.doi.org/10.1109/i-smac.2017.8058282.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Thirumarai Selvi, C., A. Amruthamathi, P. S. Surabhi, N. M. Motheswar i D. Pavithra. "Smart Authentication of Documents Using RFID and Fingerprint Modules". W 2021 7th International Conference on Advanced Computing and Communication Systems (ICACCS). IEEE, 2021. http://dx.doi.org/10.1109/icaccs51430.2021.9441851.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Avanzato, Roberta, Francesco Beritelli, Giacomo Capizzi, Christian Napoli i Corrado Rametta. "Soil Moisture Estimation based on the RSSI of RFID Modules". W 2021 11th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications (IDAACS). IEEE, 2021. http://dx.doi.org/10.1109/idaacs53288.2021.9661031.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Kayalvizhi, M., G. Vallathan i A. Vinoth Kannan. "Operative presence and workflow management using RFID and sensor based modules". W 2016 International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET). IEEE, 2016. http://dx.doi.org/10.1109/wispnet.2016.7566104.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Rida, Amin, Rushi Vyas, Li Yang, Catherina Kruesi i Manos M. Tentzeris. "Low Cost Inkjet-printing Paper-Based Modules for RFID Sensing and Wireless Applications". W 2008 38th European Microwave Conference (EuMC). IEEE, 2008. http://dx.doi.org/10.1109/eumc.2008.4751806.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Shi, Weiwei, Zhao Guangdong i Chiu-Sing Choy. "Subthreshold Passive RFID Tag's Baseband Processor Core Design with Custom Modules and Cells". W 2016 IEEE Computer Society Annual Symposium on VLSI (ISVLSI). IEEE, 2016. http://dx.doi.org/10.1109/isvlsi.2016.82.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Shi, Weiwei, Linqing Fu i Chiu-Sing Choy. "Subthreshold passive RFID tag's baseband processor core design with custom modules and cells". W 2015 IEEE International Conference on Electronics, Circuits, and Systems (ICECS). IEEE, 2015. http://dx.doi.org/10.1109/icecs.2015.7440245.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Laheurte, Jean-Marc, i Stephane Protat. "Considerations on the use of commercial loop modules in the excitation of UHF RFID antennas". W 2014 XXXIth URSI General Assembly and Scientific Symposium (URSI GASS). IEEE, 2014. http://dx.doi.org/10.1109/ursigass.2014.6929406.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Adeyeye, Ajibayo, Charles Lynch, Xuanke He, Sanghoon Lee, John D. Cressler i Manos M. Tentzeris. "Fully Inkjet Printed 60GHz Backscatter 5G RFID Modules for Sensing and Localization in Internet of Things (IoT) and Digital Twins Applications". W 2021 IEEE 71st Electronic Components and Technology Conference (ECTC). IEEE, 2021. http://dx.doi.org/10.1109/ectc32696.2021.00195.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii