Rozprawy doktorskie na temat „Residual ratio”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Residual ratio”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Bean, Ian James Materials Science & Engineering Faculty of Science UNSW. "Blast furnace hearth drainage improvement of the residual - flowout correlation". Publisher:University of New South Wales. Materials Science & Engineering, 2008. http://handle.unsw.edu.au/1959.4/41490.
Pełny tekst źródłaSmith, Shannon Nicole. "Residual feed intake of Angus cattle divergently selected for feed conversion ratio". The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1229619401.
Pełny tekst źródłaMbowe, Omar B. "A Study of the Mean Residual Life Function and Its Applications". Digital Archive @ GSU, 2006. http://digitalarchive.gsu.edu/math_theses/11.
Pełny tekst źródłaHanpobamorn, Saijai. "Low-cost and Traditional Airlines : Ratio Analysis and Equity Valuation by the Residual Earnings Model". Thesis, Umeå University, Umeå School of Business, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-1203.
Pełny tekst źródłaFundamental analysts use basic fundamentals, which generally based on available public information, to determine a firm’s intrinsic value. Forecasting future performance is one of the key elements for doing fundamental analysis, and historical results are the foundation for future forecast.
The analysis of this study is conducted into two sections with case studies in the airline business. Firstly, financial ratios are analyzed to examine whether low-cost or traditional airlines better perform their operations during a certain period. The other section is undertaking fundamental analysis of the case studies to evaluate current stock prices of representative airlines based on the potential future forecast. The model using for this valuation is the Residual Earnings Model. Key assumptions of future forecasts are mainly based on their historical ratios. Other related factor such as the gross domestic product (GDP) is included in forecasting sales growth rate because it is one of the key influences in the airline business.
For ratio analysis, the findings suggest that low-cost airlines perform better operations based on five years average. However, the traditional airlines improve their performances significantly in the latest fiscal year. For equity valuation, the findings show that estimates of equity values of the airlines yield inconsistent results comparing to their stock prices. Possible reasons of the difference might be the improvement in key financial ratios of the airlines.
Yao, Chen. "Measuring Housing Affordability in Beijing". Thesis, KTH, Bygg- och fastighetsekonomi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-48600.
Pełny tekst źródłaNurmenniemi, S. (Sami). "Usefulness of book-to-market ratio and strength of future residual incomes to predict future stock returns". Master's thesis, University of Oulu, 2015. http://urn.fi/URN:NBN:fi:oulu-201505211552.
Pełny tekst źródłaCastro, Andressa Souza Campos Monteiro. "Consumption-wealth ratio and expected stock returns: evidence from panel data". reponame:Repositório Institucional do FGV, 2015. http://hdl.handle.net/10438/13668.
Pełny tekst źródłaApproved for entry into archive by BRUNA BARROS (bruna.barros@fgv.br) on 2015-04-30T14:49:43Z (GMT) No. of bitstreams: 1 Dissertacao_final.pdf: 676467 bytes, checksum: fdc9136b5dfb8c962d18e88e3f041564 (MD5)
Approved for entry into archive by Marcia Bacha (marcia.bacha@fgv.br) on 2015-05-04T12:47:02Z (GMT) No. of bitstreams: 1 Dissertacao_final.pdf: 676467 bytes, checksum: fdc9136b5dfb8c962d18e88e3f041564 (MD5)
Made available in DSpace on 2015-05-04T12:47:13Z (GMT). No. of bitstreams: 1 Dissertacao_final.pdf: 676467 bytes, checksum: fdc9136b5dfb8c962d18e88e3f041564 (MD5) Previous issue date: 2015-03-20
This paper investigates the role of consumption-wealth ratio on predicting future stock returns through a panel approach. We follow the theoretical framework proposed by Lettau and Ludvigson (2001), in which a model derived from a nonlinear consumer’s budget constraint is used to settle the link between consumption-wealth ratio and stock returns. Using G7’s quarterly aggregate and financial data ranging from the first quarter of 1981 to the first quarter of 2014, we set an unbalanced panel that we use for both estimating the parameters of the cointegrating residual from the shared trend among consumption, asset wealth and labor income, cay, and performing in and out-of-sample forecasting regressions. Due to the panel structure, we propose different methodologies of estimating cay and making forecasts from the one applied by Lettau and Ludvigson (2001). The results indicate that cay is in fact a strong and robust predictor of future stock return at intermediate and long horizons, but presents a poor performance on predicting one or two-quarter-ahead stock returns.
Benetti, Mozara. "Comportamento hidráulico e mecânico de um solo residual tratado com cal". reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2015. http://hdl.handle.net/10183/127889.
Pełny tekst źródłaThe approach of the hydraulic behavior associated with the mechanical behavior of a material is of utmost importance. The technique of treating soil with lime has been used successfully in geotechnical engineering, improving the characteristics of the soil, which is a highly variable and complex material, and does not always meet the required needs. In that sense, this study has for objective to quantify the influence of amounts of lime and of the porosity on the hydraulic and mechanical behavior a sandy silt soil stabilized with lime, checking the suitability of the use de voids/ lime ratio in estimating of the hydraulic conductivity, unconfined compression strength (qu) and tensile strength (qt). For that, number of hydraulic conductivity tests and strength tests were carried out for soil-hydrated lime blends, with lime contents of 5%, 7% e 9%, dry unit weight of 16,0 kN/m³, 17,2 kN/m³ and 18,5 kN/m³, 28 days as curing time. It was observed that the porosity of the mixture is a parameter influence on the hydraulic conductivity measured. The results show the unconfined compressive and the splitting tensile strength increasing potentially with the reduction of its porosity. It was found a single qt/qu relationship equal to 0,13, being independent of the porosity/lime ratio. The methodology suggested by Consoli (2014), was adequate for determining of Mohr-Coulomb failure parameters (effective cohesion intercept effective angle of shearing resistance) for a ratio [n/(Liv)0,12=35. The voids/lime ratio, defined as the ratio between the porosity of the compacted mixture and volumetric lime content, adjusted by a power, demonstrated to be the most appropriate parameter to assess the hydraulic and mechanical behavior of the soil-lime mixture studied.
Bhatia, Krishan. "USE OF NEAR INFRARED SPECTROSCOPY AND MULTIVARIATE CALIBRATION IN PREDICTING THE PROPERTIES OF TISSUE PAPER MADE OF RECYCLED FIBERS AND VIRGIN PULP". Miami University / OhioLINK, 2004. http://rave.ohiolink.edu/etdc/view?acc_num=miami1077768497.
Pełny tekst źródłaYasuda, Isao. "Pulmonary Stenosis with Intact Ventricular Septum: Assessment and Indication of Reconstructive Surgery for Residual Right-Ventricular Outflow Tract Obstruction". Thesis, Georg Thieme, 1991. http://hdl.handle.net/2237/16685.
Pełny tekst źródłaMeyer, Jason Andrew. "Innovations in Representation and Calibration of Residual Gas Fraction and Volumetric Efficiency in a Spark Ignited, Internal Combustion Engine". The Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=osu1211990310.
Pełny tekst źródłaCardoso, Francielli Dalprá. "Arrendamento acessível em Portugal: contributos para as políticas públicas". Master's thesis, Instituto Superior de Ciências Sociais e Políticas, 2019. http://hdl.handle.net/10400.5/18365.
Pełny tekst źródłaCom o aumento dos preços da habitação, a questão da habitação acessível entrou recentemente na agenda pública e política em Portugal. O governo apresentou soluções no âmbito do arrendamento, mas o problema público não parece ter sido claramente definido. Este estudo tem três objetivos. Primeiro, analisam-se os conceitos de “acessibilidade económica à habitação” e “habitação a preços acessíveis” subjacentes às políticas públicas portuguesas propostas para enfrentar a questão, comparando-os com a literatura. O segundo objetivo avalia a situação atual da acessibilidade ao arrendamento em Portugal, identificando as características socioeconómicas dos agregados familiares considerados em risco de enfrentar este tipo de problema. Utilizando os microdados do Inquérito às Condições de Vida e Rendimento de 2016, aplicaram-se as duas abordagens principais para examinar a acessibilidade à habitação – o rendimento residual e o rácio despesas-rendimentos. Por último, analisam-se os pontos fortes e fracos de ambas as abordagens. Os resultados sugerem uma maior adequação da abordagem do rendimento residual para a identificação das famílias nessas condições. Por conseguinte, discute-se a importância da correta definição do problema público e as suas implicações para o desenho e a implementação de políticas de habitação acessível.
In times of rising house prices, the affordable housing issue has recently reached the public and political agenda in Portugal. The government presented solutions within the rental sector, yet the public problem does not seem to have been clearly defined. The aim of this study is threefold. First, it analyses the underlying concepts of “housing affordability” and “affordable housing” in the Portuguese public policies proposed to tackle the issue, by comparing them to the literature. The second objective assesses the recent state of rental affordability in Portugal, identifying the socioeconomic characteristics of the households considered to be at risk of having this kind of problem. Using microdata from the 2016 Living Conditions and Income Survey, the study applies the two main approaches to examine housing affordability – the residual income and the expenditure-to-income ratio. Lastly, it analyses the strengths and weaknesses of both approaches. The results suggest a better suitability of the residual income approach for the identification of families in such conditions. Therefore, the study discusses the importance of the correct public problem definition and its implications for the design and implementation of affordable housing policies.
N/A
Kritzinger, Mieke. "Cortical Auditory Evoked Potential (CAEP) and the chirp Auditory Steady State Response (ASSR) in predicting behavioural hearing thresholds in adults with sensorineural hearing loss". Diss., University of Pretoria, 2019. http://hdl.handle.net/2263/73231.
Pełny tekst źródłaDissertation (MA (Audiology))--University of Pretoria, 2019.
Speech-Language Pathology and Audiology
MA Audiology
Unrestricted
Winnett, Angela Susan. "Flexible estimators of hazard ratios for exploratory and residual analysis". Thesis, University College London (University of London), 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.312945.
Pełny tekst źródłaFeenstra, Stanley. "Aqueous concentration ratios to estimate mass of multi-component NAPL residual in porous media". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/nq21345.pdf.
Pełny tekst źródłaAcosta, Argueta Lesly María. "Particle filtering estimation for linear and nonlinear state-space models". Doctoral thesis, Universitat Politècnica de Catalunya, 2013. http://hdl.handle.net/10803/134356.
Pełny tekst źródłaL’estimació seqüencial dels estats (filtratge) i la corresponent estimació simultània dels estats i els paràmetres fixos d’unmodel dinàmic formulat en forma d’espai d’estat –sigui lineal o no– constitueix un problema de rellevada importància enmolts camps, com ser a l’àrea de finances. L’objectiu principal d’aquesta tesi és el d’estimar seqüencialment i de manera eficient –des d’un punt de vista bayesià i usant lametodologia de filtratge de partícules– els estats i/o els paràmetres fixos d’unmodel d’espai d’estat dinàmic no estàndard: possiblement no lineal, no gaussià o no estacionari. El present treball consisteix de 7 capítols i s’organitza en dues parts. El Capítol 1 hi introdueix conceptes bàsics, lamotivació, el propòsit i l’estructura de la tesi. La primera part d’aquesta tesi (capítols 2 a 4) se centra únicament en l’estimació dels estats. El Capítol 2 presenta una revisió exhaustiva dels algorismes més clàssics no basats en simulacions (KF, EKF, UKF2) i els basats en simulacions (SIS, SIR, ASIR, EPF, UPF). Per a aquests filtres, tots esmentats en la literatura, amés de descriure’ls detalladament, s’ha unificat la notació amb l’objectiu que aquesta sigui consistent i comparable entre els diferents algorismes implementats al llarg d’aquest treball. Els capítols 3 i 4 se centren en la realització d’estudis Monte Carlo (MC) extensos que confirmen l’eficiència de la metodologia de filtratge de partícules per estimar els estats latents d’un procés dinàmic formulat en forma d’espai d’estat, sigui lineal o no. Alguns estudis MC complementaris es duen a terme per avaluar diferents aspectes de la metodologia de filtratge de partícules, com ser el problema de la degeneració, l’elecció de l’estratègia de remostreig, el nombre de partícules usades o la grandària de la sèrie temporal. Específicament, el Capítol 3 il·lustra el comportament de la metodologia de filtratge de partícules en un context lineal i gaussià en comparació de l’òptim i exacte filtre de Kalman. La capacitat de filtratge de les quatre variants de filtre de partícules estudiades (SIR, SIRopt, ASIR, KPF; l’últim sent un cas especial de l’algorisme EPF) es va avaluar sobre la base de dos processos de sèries temporals aparentment simples però importants: els anomenats Local Level Model (LLM) i el AR (1) plus noise, que són no estacionari i estacionari, respectivament. Aquest capítol estudia en profunditat temes rellevants dins de l’enfocament adoptat, coml’impacte en l’estimació de la relació entre el senyal i el soroll (SNR: signal-to-noise-ratio, en aquesta tesi), de la longitud de la sèrie temporal i del nombre de partícules. El Capítol 4 avalua i il·lustra el comportament de la metodologia de filtratge de partícules en un context no lineal. En concret, s’utilitza un model d’espai d’estat no lineal, no gaussià i no estacionari pres de la literatura per il·lustrar el comportament de quatre filtres de partícules (SIR, ASIR, EPF, UPF) en contraposició a dos filtres no basats en simulació ben coneguts (EKF, UKF). Aquí es comparen els esquemes de remostreig residual i estratificat i s’avalua l’efecte d’augmentar el nombre de partícules. A la segona part (capítols 5 i 6), es duen a terme també estudis MC extensos, però ara l’objectiu principal és l’estimació simultània dels estats i paràmetres fixos de certsmodels seleccionats. Aquesta àrea de recerca segueix sentmolt activa i és on aquesta tesi hi contribueixmés. El Capítol 5 proveeix una revisió parcial dels mètodes per dur a terme l’estimació simultània dels estats i paràmetres fixos a través de la metodologia de filtratge de partícules. Aquests filtres són una extensió d’aquells adoptats anteriorment només per estimar els estats. Aquí es realitza un estudi MC per estimar l’estat (nivell) i els dos paràmetres de variància del model LLM no estacionari; s’utilitzen quatre variants (LW, SIRJ, SIRoptJ, KPFJ) de filtre de partícules, sis escenaris típics del SNR i dos escenaris per a l’anomenat factor de descompte necessari en el pas de diversificació. En aquest capítol, es proposa la variant de filtre de partícules SIRJ (Sample Importance Resampling with Jittering) com a alternativa al filtre de referència de Liu iWest (LWPF). També es proposa i explora l’ús combinat d’una distribució d’importància basada en el filtre de Kalman i un pas de diversificació (jittering) que dóna lloc a la variant del filtre de partícules anomenada Kalman Particle Filteringwith Jittering (KPFJ). El Capítol 6 se centra en l’estimació dels estats i dels paràmetres fixos delmodel bàsic no estàndard de volatilitat estocàstica denominat Stochastic autoregressive model of order one: SARV (1). Després d’una introducció i descripció detallada de les característiques pròpies de sèries temporals financeres, es demostra mitjançant estudis MC la capacitat d’estimació de dues variants de filtre de partícules (SIRJ vs. LW(Liu iWest)) utilitzant dades simulades. El capítol acaba amb una aplicació a dos conjunts de dades reals dins de l’àrea financera: l’índex de rendiments espanyol IBEX 35 i els preus al comptat (en dòlars) del Brent europeu. La contribució en els capítols 5 i 6 consisteix en proposar noves variants de filtres de partícules, compoden ser el KPFJ, el SIRJ i el SIRoptJ (un cas especial de l’algorisme SIRJ utilitzant una distribució d’importància òptima) que s’han desenvolupat al llarg d’aquest treball. També se suggereix que els anomenats filtres de partícules EPFJ (Extended Particle Filter with Jittering) i UPFJ (Unscented Particle Filter with Jittering) podrien ser opcions raonables quan es tracta de models altament no lineals; el KPFJ sent un cas especial de l’algorisme EPFJ. En aquesta part, també es tracten aspectes rellevants dins de la metodologia de filtratge de partícules, com ser l’impacte potencial en l’estimació de la longitud de la sèrie temporal, el paràmetre de factor de descompte i el nombre de partícules. Al llarg d’aquest treball s’han escrit (i implementat en el llenguatge R) els pseudo-codis per a tots els filtres estudiats. Els resultats presentats s’obtenenmitjançant simulacionsMonte Carlo (MC) extenses, tenint en compte variats escenaris descrits en la tesi. Les característiques intrínseques del model baix estudi van guiar l’elecció dels filtres a comparar en cada situació específica. Amés, la comparació dels filtres es basa en el RMSE (RootMean Square Error), el temps de CPU i el grau de degeneració. Finalment, el Capítol 7 presenta la discussió, les contribucions i les línies futures de recerca. Alguns aspectes teòrics i pràctics complementaris es presenten en els apèndixs.
La estimación secuencial de los estados (filtrado) y la correspondiente estimación simultánea de los estados y los parámetros fijos de un modelo dinámico formulado en forma de espacio de estado –sea lineal o no– constituye un problema de relevada importancia enmuchos campos, como ser en el área de finanzas. El objetivo principal de esta tesis es el de estimar secuencialmente y de manera eficiente –desde un punto de vista bayesiano y usando la metodología de filtrado de partículas– los estados y/o los parámetros fijos de un modelo de espacio de estado dinámico no estándar: posiblemente no lineal, no gaussiano o no estacionario. El presente trabajo consta de 7 capítulos y se organiza en dos partes. El Capítulo 1 introduce conceptos básicos, la motivación, el propósito y la estructura de la tesis. La primera parte de esta tesis (capítulos 2 a 4) se centra únicamente en la estimación de los estados. El Capítulo 2 presenta una revisión exhaustiva de los algoritmos más clásicos no basados en simulaciones (KF, EKF,UKF3) y los basados en simulaciones (SIS, SIR, ASIR, EPF, UPF). Para todos estos filtros, mencionados en la literatura, además de describirlos en detalle, se ha unificado la notación con el objetivo de que ésta sea consistente y comparable entre los diferentes algoritmos implementados a lo largo de este trabajo. Los capítulos 3 y 4 se centran en la realización de estudios Monte Carlo (MC) extensos que confirman la eficiencia de la metodología de filtrado de partículas para estimar los estados latentes de un proceso dinámico formulado en forma de espacio de estado, sea lineal o no. Algunos estudios MC complementarios se llevan a cabo para evaluar varios aspectos de la metodología de filtrado de partículas, como ser el problema de la degeneración, la elección de la estrategia de remuestreo, el número de partículas usadas o el tamaño de la serie temporal. Específicamente, el Capítulo 3 ilustra el comportamiento de lametodología de filtrado de partículas en un contexto lineal y gaussiano en comparación con el óptimo y exacto filtro de Kalman. La capacidad de filtrado de las cuatro variantes de filtro de partículas estudiadas (SIR, SIRopt, ASIR, KPF; el último siendo un caso especial del algoritmo EPF) se evaluó en base a dos procesos de series temporales aparentemente simples pero importantes: los denominados Local Level Model (LLM) y el AR (1) plus noise, que son no estacionario y estacionario, respectivamente. Este capítulo estudia en profundidad temas relevantes dentro del enfoque adoptado, como el impacto en la estimación de la relación entre la señal y el ruido (SNR: signal-to-noise-ratio, en esta tesis), de la longitud de la serie temporal y del número de partículas. El Capítulo 4 evalúa e ilustra el comportamiento de la metodología de filtrado de partículas en un contexto no lineal. En concreto, se utiliza un modelo de espacio de estado no lineal, no gaussiano y no estacionario tomado de la literatura para ilustrar el comportamiento de cuatro filtros de partículas (SIR, ASIR, EPF, UPF) en contraposición a dos filtros no basados en simulación bien conocidos (EKF, UKF). Aquí se comparan los esquemas de remuestreo residual y estratificado y se evalúa el efecto de aumentar el número de partículas. En la segunda parte (capítulos 5 y 6), se llevan a cabo también estudios MC extensos, pero ahora el objetivo principal es la estimación simultánea de los estados y parámetros fijos de ciertos modelos seleccionados. Esta área de investigación sigue siendo muy activa y es donde esta tesis contribuye más. El Capítulo 5 provee una revisión parcial de losmétodos para llevar a cabo la estimación simultánea de los estados y parámetros fijos a través de lametodología de filtrado de partículas. Dichos filtros son una extensión de aquellos adoptados anteriormente sólo para estimar los estados. Aquí se realiza un estudio MC para estimar el estado (nivel) y los dos parámetros de varianza del modelo LLM no estacionario; se utilizan cuatro variantes (LW, SIRJ, SIRoptJ, KPFJ) de filtro de partículas, seis escenarios típicos del SNR y dos escenarios para el llamado factor de descuento necesario en el paso de diversificación. En este capítulo, se propone la variante de filtro de partículas SIRJ (Sample Importance resampling with Jittering) como alternativa al filtro de referencia de Liu y West (LW PF). También se propone y explora el uso combinado de una distribución de importancia basada en el filtro de Kalman y un paso de diversificación (jittering) que da lugar a la variante del filtro de partículas denominada Kalman Particle Filteringwith Jittering (KPFJ). El Capítulo 6 se centra en la estimación de los estados y de los parámetros fijos del modelo básico no estándar de volatilidad estocástica denominado Stochastic autoregressivemodel of order one: SARV (1). Después de una introducción y descripción detallada de las características propias de series temporales financieras, se demuestra mediante estudios MC la capacidad de estimación de dos variantes de filtro de partículas (SIRJ vs. LW (Liu y West)) utilizando datos simulados. El capítulo termina con una aplicación a dos conjuntos de datos reales dentro del área financiera: el índice de rendimientos español IBEX 35 y los precios al contado (en dólares) del Brent europeo. La contribución en los capítulos 5 y 6 consiste en proponer nuevas variantes de filtros de partículas, como pueden ser el KPFJ, el SIRJ y el SIRoptJ (Caso especial del algoritmo SIRJ utilizando una distribución de importancia óptima) que se han desarrollado a lo largo de este trabajo. También se sugiere que los llamados filtros de partículas EPFJ (Extended Particle Filter with Jittering) y UPFJ (Unscented Particle Filter with Jittering) podrían ser opciones razonables cuando se trata de modelos altamente no lineales; el KPFJ siendo un caso especial del algoritmo EPFJ. En esta parte, también se tratan aspectos relevantes dentro de lametodología de filtrado de partículas, como ser el impacto potencial en la estimación de la longitud de la serie temporal, el parámetro de factor de descuento y el número de partículas. A lo largo de este trabajo se han escrito (e implementado en el lenguaje R) los pseudo-códigos para todos los filtros estudiados. Los resultados presentados se obtienen mediante simulaciones Monte Carlo (MC) extensas, teniendo en cuenta variados escenarios descritos en la tesis. Las características intrínsecas del modelo bajo estudio guiaron la elección de los filtros a comparar en cada situación específica. Además, la comparación de los filtros se basa en el RMSE (Root Mean Square Error), el tiempo de CPU y el grado de degeneración. Finalmente, el Capítulo 7 presenta la discusión, las contribuciones y las líneas futuras de investigación. Algunos aspectos teóricos y prácticos complementarios se presentan en los apéndices.
Crnogorac, Goranka. "Analysis of dithiocarbamate fungicide residues by liquid chromatography, mass spectrometry and isotope ratio mass spectrometry". Aachen Shaker, 2008. http://d-nb.info/993691447/04.
Pełny tekst źródłaCrnogorac, Goranka [Verfasser]. "Analysis of Dithiocarbamate Fungicide Residues by Liquid Chromatography/Mass Spectrometry and Isotope Ratio Mass Spectrometry / Goranka Crnogorac". Aachen : Shaker, 2009. http://d-nb.info/1156517389/34.
Pełny tekst źródłaCamarão, Arnaldo Freitas. "Um modelo para previsão de tensões residuais em cilindros de aço temperados por indução". Universidade de São Paulo, 1998. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-08032018-094937/.
Pełny tekst źródłaLarge efforts have been made to predict and understand the residual stresses formation in through hardening and case hardening of steel. In the present work the objective was to develop a model to predict the residual stresses in induction hardening of cylindrical steel bars. Induction hardening, i.e. electromagnetic heating and subsequent quenching, is a surface treatment of great use in industry because it is suitable to improve locally mechanical properties of the high stressed regions of the part. A hard surface layer with high compressive residual stress is normally obtained, while retaining ductility and toughness in the core. Applied to components that undergo severe duty cycles, such as gears, shafts axles and bearings, it is also clean, fast and suitable for on-line applications. It is expected however, that increasing the hardening depth leads to undesirable high subsurface tensile stress, which can cause premature failure of the component. Emphasis has been on investigating the influence of case depth on the residual stress distribution of the cylindrical steel specimens. A finite element model was developed to compute the temperature history, phase transformation and residual stress for the induction hardening process. The Austenite to Martensite phase transformation during quenching, responsible for the high surface compressive stress, as result of volume expansion, was evaluated by a custom FORTRAN routine linked to the ANSYS5.3 FEA code. The model geometry and solution process were automated by the use of ANSYS Parametric Design Language (APDL). The thermoelastoplastic behavior of the material was studied, considering material properties temperature dependent. The results of the calculations have been compared to experimental measurements of the residual stresses at the surface, using X Ray diffraction technique. Finally, accuracy and main source of erros are discussed. Future improvements and applications of this model are proposed.
Pittman, Kara. "High Residue Cover Crops for Annual Weed Suppression in Corn and Soybean Production and Potential for Hairy Vetch (Vicia villosa) to be Weedy". Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/82041.
Pełny tekst źródłaMaster of Science in Life Sciences
Pittman, Kara Brooke. "High Residue Cover Crops for Annual Weed Suppression in Corn and Soybean Production and Potential for Hairy Vetch (Vicia villosa) to be Weedy". Thesis, Virginia Tech, 2002. http://hdl.handle.net/10919/82041.
Pełny tekst źródłaMaster of Science in Life Sciences
SILVA, Priscila Gonçalves da. "Inferência e diagnóstico em modelos não lineares Log-Gama generalizados". Universidade Federal de Pernambuco, 2016. https://repositorio.ufpe.br/handle/123456789/18637.
Pełny tekst źródłaMade available in DSpace on 2017-04-25T14:46:06Z (GMT). No. of bitstreams: 2 license_rdf: 1232 bytes, checksum: 66e71c371cc565284e70f40736c94386 (MD5) TESE VERSÃO FINAL (CD).pdf: 688894 bytes, checksum: fc5c0291423dc50d4989c1c2d8d4af65 (MD5) Previous issue date: 2016-11-04
Young e Bakir (1987) propôs a classe de Modelos Lineares Log-Gama Generalizados (MLLGG) para analisar dados de sobrevivência. No nosso trabalho, estendemos a classe de modelos propostapor Young e Bakir (1987) permitindo uma estrutura não linear para os parâmetros de regressão. A nova classe de modelos é denominada como Modelos Não Lineares Log-Gama Generalizados (MNLLGG). Com o objetivo de obter a correção de viés de segunda ordem dos estimadores de máxima verossimilhança (EMV) na classe dos MNLLGG, desenvolvemos uma expressão matricial fechada para o estimador de viés de Cox e Snell (1968). Analisamos, via simulação de Monte Carlo, os desempenhos dos EMV e suas versões corrigidas via Cox e Snell (1968) e através da metodologia bootstrap (Efron, 1979). Propomos também resíduos e técnicas de diagnóstico para os MNLLGG, tais como: alavancagem generalizada, influência local e influência global. Obtivemos, em forma matricial, uma expressão para o fator de correção de Bartlett à estatística da razão de verossimilhanças nesta classe de modelos e desenvolvemos estudos de simulação para avaliar e comparar numericamente o desempenho dos testes da razão de verossimilhanças e suas versões corrigidas em relação ao tamanho e poder em amostras finitas. Além disso, derivamos expressões matriciais para os fatores de correção tipo-Bartlett às estatísticas escore e gradiente. Estudos de simulação foram feitos para avaliar o desempenho dos testes escore, gradiente e suas versões corrigidas no que tange ao tamanho e poder em amostras finitas.
Young e Bakir (1987) proposed the class of generalized log-gamma linear regression models (GLGLM) to analyze survival data. In our work, we extended the class of models proposed by Young e Bakir (1987) considering a nonlinear structure for the regression parameters. The new class of models is called generalized log-gamma nonlinear regression models (GLGNLM). We also propose matrix formula for the second-order bias of the maximum likelihood estimate of the regression parameter vector in the GLGNLM class. We use the results by Cox and Snell (1968) and bootstrap technique [Efron (1979)] to obtain the bias-corrected maximum likelihood estimate. Residuals and diagnostic techniques were proposed for the GLGNLM, such as generalized leverage, local and global influence. An general matrix notation was obtained for the Bartlett correction factor to the likelihood ratio statistic in this class of models. Simulation studies were developed to evaluate and compare numerically the performance of likelihood ratio tests and their corrected versions regarding size and power in finite samples. Furthermore, general matrix expressions were obtained for the Bartlett-type correction factor for the score and gradient statistics. Simulation studies were conducted to evaluate the performance of the score and gradient tests with their corrected versions regarding to the size and power in finite samples.
Silva, Cleiton Carvalho. "AVALIAÃÃO DAS TENSÃES RESIDUAIS DE SOLDAGEM EM TUBULAÃÃES DE PEQUENO DIÃMETRO USADAS EM REFINARIA DE PETRÃLEO". Universidade Federal do CearÃ, 2007. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=1164.
Pełny tekst źródłaCoordenaÃÃo de AperfeiÃoamento de Pessoal de NÃvel Superior
Este trabalho teve como objetivo avaliar o comportamento das tensÃes residuais em tubulaÃÃes de aÃo ASTM A106 Gr. B com pequeno diÃmetro, soldada pelos processos TIG manual e automÃtico. Buscou-se tambÃm avaliar o efeito do aporte tÃrmico sobre o perfil de tensÃes, bem como correlacionar os resultados com a microestrutura e dureza. A mediÃÃo das tensÃes foi realizada atravÃs de difraÃÃo de raio-X, utilizando um minidifratÃmetro empregado para mediÃÃo em campo. AnÃlises metalogrÃficas foram realizadas na seÃÃo transversal da junta, atravÃs de microscopia Ãtica e microscopia eletrÃnica de varredura. Foram levantados os perfis de microdureza nas superfÃcies externa e interna. Os resultados mostraram que a mediÃÃo de tensÃes residuais por difraÃÃo de raio-X, usando o minidifratÃmetro para aplicaÃÃes em campo, à eficaz na determinaÃÃo do perfil de tensÃes, contudo, à necessÃria a realizaÃÃo de ajustes dos difratogramas por funÃÃes analÃticas, para determinar a correta localizaÃÃo do pico de difraÃÃo de raio-X, reduzindo o erro das medidas. As mediÃÃes das tensÃes residuais axiais realizadas na superfÃcie externa dos tubos mostraram que o perfil à formado por tensÃes compressivas na regiÃo da solda (zona fundida e zona afetada pelo calor) e por tensÃes trativas nas regiÃes mais afastadas. Foram observados elevados nÃveis de tensÃes residuais axiais compressivas na superfÃcie externa de tubos de parede fina, na regiÃo da solda, os quais podem representar uma situaÃÃo crÃtica, visto que o comportamento linear das tensÃes ao longo da espessura devido ao efeito torniquete à consensual e, portanto, isso indica a presenÃa de elevados nÃveis de tensÃes residuais de traÃÃo no metal de solda e na zona afetada pelo calor. O ciclo tÃrmico do passe de acabamento ocasionou um intenso refino de grÃo e uma significativa reduÃÃo de dureza, especialmente no metal de solda e na superfÃcie interna dos tubos, a exceÃÃo das amostras de 2â de diÃmetro soldadas com elevado aporte tÃrmico. Nenhuma das amostras soldadas apresentou valores de dureza acima do mÃximo estabelecido por norma, que à de 248 HV, mostrando que o fato da junta apresentar dureza baixa, nÃo necessariamente representa que esta nÃo esteja sujeita a um elevado nÃvel de tensÃes residuais.
The aim of this work was to evaluate the behavior of welding residual stress in small size pipes of ASTM A106 Gr. B steel, welded by manual and automatic GTAW processes. It was also evaluated the effect of the welding heat input on residual stress profile, as well as to correlate the results with microstructure and hardness. The residual stress measurement was accomplished through X-ray diffraction, using a minidiffractometer for measurement in field. Metallographics analysis were accomplished in the traverse section of the welded joint, using optic microscopy and scanning electron microscopy. The microhardness profiles in the outer and inner surfaces of pipe were determined. The results showed that the measures of residual stress by X-ray diffraction with minidiffractometer for applications in field was shown quite effective in the residual stress profile determination, however, it is necessary the accomplishment of diffractograms fittings by analytic functions, to determine the correct peak localization, reducing the measures error. The measurements of the axial residual stress accomplished in the outer surface pipes showed that the profile is formed by compressive stresses in the welds region (fusion zone and heat affected zone - HAZ) and for tension stresses in the areas more distant of weld bead. High levels of compressive axial residual stress were observed in the outer surface of small size pipes, located in the welds region, which can represent a critical situation, because the linear behavior of the through-thickness residual stress due to âtourniquetâ effect is consensual and, therefore, indicates the presence of high levels of tension residual stress in the inner surface, especially in the root weld metal and HAZ. The welding heat input of the finish pass caused an intense grain refining and a significant reduction of hardness of the weld metal in the inner surface, exception of 2" diameter sample welded with high heat input. None of the welded samples presented values of hardness above the maximum established for standard, which is 248 HV, showing that the fact of the welded joint to present low hardness, it does not necessarily represent that this is not subject to a high level of residual stress.
Silva, Cleiton Carvalho. "Avaliação das tensões residuais de soldagem em tubulações de pequeno diâmetro usadas em refinaria de petróleo". reponame:Repositório Institucional da UFC, 2007. http://www.repositorio.ufc.br/handle/riufc/598.
Pełny tekst źródłaSubmitted by Marlene Sousa (mmarlene@ufc.br) on 2011-07-08T18:31:23Z No. of bitstreams: 1 2007_dis_ccsilva.pdf: 19425141 bytes, checksum: 3e8e0027e5b3a676e1aa1113e28a5f6d (MD5)
Approved for entry into archive by Marlene Sousa(mmarlene@ufc.br) on 2011-07-08T18:31:43Z (GMT) No. of bitstreams: 1 2007_dis_ccsilva.pdf: 19425141 bytes, checksum: 3e8e0027e5b3a676e1aa1113e28a5f6d (MD5)
Made available in DSpace on 2011-07-08T18:31:43Z (GMT). No. of bitstreams: 1 2007_dis_ccsilva.pdf: 19425141 bytes, checksum: 3e8e0027e5b3a676e1aa1113e28a5f6d (MD5) Previous issue date: 2007
The aim of this work was to evaluate the behavior of welding residual stress in small size pipes of ASTM A106 Gr. B steel, welded by manual and automatic GTAW processes. It was also evaluated the effect of the welding heat input on residual stress profile, as well as to correlate the results with microstructure and hardness. The residual stress measurement was accomplished through X-ray diffraction, using a minidiffractometer for measurement in field. Metallographics analysis were accomplished in the traverse section of the welded joint, using optic microscopy and scanning electron microscopy. The microhardness profiles in the outer and inner surfaces of pipe were determined. The results showed that the measures of residual stress by X-ray diffraction with minidiffractometer for applications in field was shown quite effective in the residual stress profile determination, however, it is necessary the accomplishment of diffractograms fittings by analytic functions, to determine the correct peak localization, reducing the measures error. The measurements of the axial residual stress accomplished in the outer surface pipes showed that the profile is formed by compressive stresses in the welds region (fusion zone and heat affected zone - HAZ) and for tension stresses in the areas more distant of weld bead. High levels of compressive axial residual stress were observed in the outer surface of small size pipes, located in the welds region, which can represent a critical situation, because the linear behavior of the through-thickness residual stress due to “tourniquet” effect is consensual and, therefore, indicates the presence of high levels of tension residual stress in the inner surface, especially in the root weld metal and HAZ. The welding heat input of the finish pass caused an intense grain refining and a significant reduction of hardness of the weld metal in the inner surface, exception of 2" diameter sample welded with high heat input. None of the welded samples presented values of hardness above the maximum established for standard, which is 248 HV, showing that the fact of the welded joint to present low hardness, it does not necessarily represent that this is not subject to a high level of residual stress.
Este trabalho teve como objetivo, avaliar o comportamento das tensões residuais em tubulações de aço ASTM A106 Gr. B com pequeno diâmetro, soldada pelos processos TIG manual e automático. Buscou-se também avaliar o efeito do aporte térmico sobre o perfil de tensões, bem como correlacionar os resultados com a microestrutura e dureza. A medição das tensões foi realizada através de difração de raio-X, utilizando um minidifratômetro empregado para medição em campo. Análises metalográficas foram realizadas na seção transversal da junta, através de microscopia ótica e microscopia eletrônica de varredura. Foram levantados os perfis de microdureza nas superfícies externa e interna. Os resultados mostraram que a medição de tensões residuais por difração de raio-X, usando o minidifratômetro para aplicações em campo, é eficaz na determinação do perfil de tensões, contudo, é necessária a realização de ajustes dos difratogramas por funções analíticas, para determinar a correta localização do pico de difração de raio-X, reduzindo o erro das medidas. As medições das tensões residuais axiais realizadas na superfície externa dos tubos mostraram que o perfil é formado por tensões compressivas na região da solda (zona fundida e zona afetada pelo calor) e por tensões trativas nas regiões mais afastadas. Foram observados elevados níveis de tensões residuais axiais compressivas na superfície externa de tubos de parede fina, na região da solda, os quais podem representar uma situação crítica, visto que o comportamento linear das tensões ao longo da espessura devido ao efeito torniquete é consensual e, portanto, isso indica a presença de elevados níveis de tensões residuais de tração no metal de solda e na zona afetada pelo calor. O ciclo térmico do passe de acabamento ocasionou um intenso refino de grão e uma significativa redução de dureza, especialmente no metal de solda e na superfície interna dos tubos, a exceção das amostras de 2” de diâmetro soldadas com elevado aporte térmico. Nenhuma das amostras soldadas apresentou valores de dureza acima do máximo estabelecido por norma, que é de 248 HV, mostrando que o fato da junta apresentar dureza baixa, não necessariamente representa que esta não esteja sujeita a um elevado nível de tensões residuais.
Murtagian, Gregorio Roberto. "Surface integrity on grinding of gamma titanium aluminide intermetallic compounds". Diss., Available online, Georgia Institute of Technology, 2005, 2004. http://etd.gatech.edu/theses/available/etd-08192004-181021/unrestricted/murtagian%5Fgregorio%5Fr%5F200412%5Fphd.pdf.
Pełny tekst źródłaAshok Saxena, Committee Member ; Carlos Santamarina, Committee Member ; Thomas Kurfess, Committee Member ; Hugo Ernst, Committee Member ; Steven Danyluk, Committee Chair ; David McDowell, Committee Member. Vita. Includes bibliographical references.
Carlei, Hugues. "Caractérisation et optimisation d'une étape statique d'hydrolyse des ordures ménagères résiduelles en vue de leur méthanisation hors-sol". Thesis, Paris, AgroParisTech, 2013. http://www.theses.fr/2013AGPT0045.
Pełny tekst źródłaIn the framework of the European green policy, anaerobic digestion appears as a promising technology for stabilization and valorization of Municipal Solid Waste (MSW). In practice, mechanical mixing of a complex and heterogeneous matrix such as MSW induces major operational constraints. Anaerobic digestion performances are especially limited by hydrolysis of lignocellulosic fractions which represent the main part of MSW methanogenic potential. In this context, this PhD project was aiming to characterize and optimize of a percolation process in which MSW stands still. Preliminary experiments were conducted in order to define an experimental system suitable for lab-scale study of MSW hydrolysis. Therefore, the representativeness of an easy-to-use and reproducible reconstituted waste was verified in terms of methanogenic potential, hydrolytic profiles and associated microbial communities. Following system definition, hydrolysis behavior by percolation was compared to a reference lixiviation test (NF EN 12457-4). Surprisingly, hydrolysis by percolation permitted the extraction of 39% of carbonated matter initially contained in waste whereas 18% were extracted during hydrolysis by lixiviation, thus validating operational benefit of percolation for MSW hydrolysis. Optimization of hydrolysis performance was then conducted through the screening of eight operational parameters for their influence on MSW hydrolysis performances thanks to two Designs Of Experiment (DOE). Cumulative effect of alkalinity addition (12 gHCO3-.L-1) and percolate recirculation (6 hour.day-1) significantly improved hydrolysis yield, from 17 to 43% of extracted organic matter compared to the initial content of waste (corresponding to an extraction of 26 and 69% of biodegradable matter). Structure and activity of hydrolytic microbial communities were also studied. 16S rDNA-pyrotags sequencing brought out the dominance of classes Clostridia and Bacteroidia. Additionally, a quantitative approach led by qPCR revealed a correlation between carbonates addition, pH neutralization, amounts of hydrolyzed matter at day 14 and either class Bacteroidia or genes from hydA family, involved in fermentation. Finally, metatranscriptomic approach was conducted at day 4 in order to further study microbial activity during the intense hydrolysis phase. According to functional analysis, alkalinity seems have positive influence on class Clostridia activity. More specifically, carbonates addition seems correlated to a modification of carbohydrates metabolism of organisms affiliated to Clostridium cellulolyticum and to transcriptional up-regulation of nif operon, involved in nitrogen fixation, among various types of microorganisms
Vendramim, Luis Felipe. "Análise de tensões residuais de juntas soldadas em engrenagens de moenda de cana em aço baixa liga". Universidade Federal de São Carlos, 2015. https://repositorio.ufscar.br/handle/ufscar/7276.
Pełny tekst źródłaApproved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-20T18:00:26Z (GMT) No. of bitstreams: 1 DissLFV.pdf: 6082147 bytes, checksum: 0c3dbc2525f0888e4029ab4c5ea27574 (MD5)
Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-09-20T18:00:33Z (GMT) No. of bitstreams: 1 DissLFV.pdf: 6082147 bytes, checksum: 0c3dbc2525f0888e4029ab4c5ea27574 (MD5)
Made available in DSpace on 2016-09-20T18:00:39Z (GMT). No. of bitstreams: 1 DissLFV.pdf: 6082147 bytes, checksum: 0c3dbc2525f0888e4029ab4c5ea27574 (MD5) Previous issue date: 2015-08-07
Não recebi financiamento
Residual stresses are those which remain in the part when all the external mechanical stress applied previously are removed. These residual stresses often appear in parts subjected to different thermal or mechanical processing along its thickness, among then may be cited the welding process. The objective of this work is the analysis of residual stresses generated by the recovery process for shielded metal arc welding” (SMAW) of sugarcane milling gear in Low Alloy Mild Steel ASTM C-148 for the identification of conditions with lower levels of residual stresses, aiming materials less susceptible to failure and longer service life. A comparative assessment of the levels of residual stresses in the aforementioned samples was performed by opting for performance or nonperformance of pre-heating and heat treatment of stress relieving after the completion of the welds in the field. It will be characterized by metallography and hardness profile. In order to determine the way the macro and microscopic residual stresses non-destructive, it was decided in this work by the diffraction of X-ray method. The characterization was carried out by optical microscopy, scanning electron microscopy and Vickers microhardness. The microstructure present in the base metal was characterized as microconstituent bainite, when there is a stress relieving treatment. When there isn`t such treatment, the microstructure is ferrite / pearlite. Although in the weld metal, due to the electrode composition, the microstructure is acicular ferrite. The Vickers microhardness analysis for the sample without pre-heating gave higher microhardness values along line profile (range of 250 – 325 HV) than the other conditions (range of 150 – 275 HV). Regarding the residual stresses, it can be concluded that the pre-heating and the combination of it with a subsequent heat treatment reduces the levels of both longitudinal and transverse residual stress along the weld bead.
Tensões residuais são aquelas que permanecem na peça a temperatura ambiente quando todas as suas solicitações externas são removidas. Essas tensões aparecem frequentemente em peças submetidas a diferentes processamentos térmicos e/ou mecânicos, dentre os quais pode ser citada a soldagem. O principal objetivo desta dissertação é a análise da microestrutura e das tensões residuais geradas por diferentes estratégias de recuperação por soldagem a arco com eletrodo revestido (SAER) em engrenagens de moenda de cana fabricada em aço carbono ASTM A-148, para identificação das condições com menores níveis de tensões residuais e microestrutura adequada, visando materiais menos susceptíveis a falhas e com vida útil estendida. Foi realizada uma avaliação comparativa dos níveis de tensões residuais nas amostras mencionadas, optando pela realização ou não de pré-aquecimento e tratamento térmico de alívio de tensões após a realização das soldas em campo. As mesmas serão caracterizadas por metalografia e perfil de microdureza. Com o intuito de determinar de maneira não-destrutiva as tensões residuais macro e microscópicas, optou-se neste trabalho pelo método da Difração de Raios-X. A caracterização foi feita por: microscopia ótica, eletrônica de varredura, além de microdureza Vickers. A microestrutura presente no metal base é caracterizada por agulhas que correspondem ao microconstituinte bainita quando há o tratamento de alívio de tensões. Quando não há este tratamento, a microestrutura é ferrítica/perlítica. Já no metal de solda, devido à composição do eletrodo, a microestrutura presente é de ferrita acicular. Na análise de microdureza Vickers, para a amostra sem pré aquecimento, obteve-se maior microdureza em todo o perfil da linha (faixa de 250 a 325 HV) do que as demais (faixa de 150 a 275 HV). Quanto às tensões residuais, pode-se concluir que, o pré-aquecimento e a combinação dele com um tratamento térmico posterior reduzem os níveis de tensão residual longitudinal e transversal nos cordões.
Vieira, Claudia Brasil. "Estudo da absorção de metais em cultura de milho irrigado com efluente de esgoto domestico empregando a reflexão total com radiação sincroton (SR-TXRF)". [s.n.], 2004. http://repositorio.unicamp.br/jspui/handle/REPOSIP/258637.
Pełny tekst źródłaTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo
Made available in DSpace on 2018-08-04T00:14:42Z (GMT). No. of bitstreams: 1 Vieira_ClaudiaBrasil_D.pdf: 5833113 bytes, checksum: 31e0a6b8102959812d7979ce28eac381 (MD5) Previous issue date: 2004
Resumo: O uso de efluente secundário de esgoto doméstico na agricultura tem evoluído significativamente nas últimas décadas. Sob as condições do nosso país, é promissor a utilização de efluentes de esgotos domésticos, visando à reutilização dos nutrientes originários da ecomposição da matéria orgânica. A aplicação do método de irrigação que utiliza a técnica de infiltração por sulcos rasos como pós-tratamento dos efluentes de filtros anaeróbios pode ser utilizada em diferentes culturas, aliando os critérios da Engenharia Sanitária aos da Engenharia de Irrigação. Para tanto, o monitoramento e o controle ambiental exigem técnicas analíticas capazes de determinar vários elementos, entre eles os metais são de particular nteresse, visto que estes têm efeitos tóxicos nos seres vivos. Desta forma, o objetivo principal deste trabalho foi avaliar a absorção de metais rovenientes do esgoto doméstico aplicado através de um sistema de irrigação por sulcos. Para isto a cultura de milho (AG 405-AGROCERES) foi submetida a dois diferentes tratamentos: irrigação com efluente de esgoto doméstico e com água. Após o crescimento vegetativo as plantas coletadas foram divididas em duas partes: grãos e folhas. Estas diferentes partes foram submetidas a procedimento de digestão em sistema aberto e a seguir analisadas por Fluorescência de Raios X por Reflexão Total com Radiação Síncrotron (SR-TXRF). Foi observado que a concentração de metais nas plantas submetidas à aplicação com efluente foi mais elevada do que nas plantas irrigadas com água. Os resultados indicaram que a absorção de metais, nas folhas e na espiga, está diretamente relacionada com a taxa de aplicação no caso da irrigação com água. Mas no caso da irrigação com efluente foi observada uma maior absorção de metais quando a planta foi irrigada com a taxa de aplicação de 180 L, tanto para as folhas como para a espiga
Doutorado
Recursos Hidricos
Mestre em Engenharia Civil
Martinez, Meire França [UNESP]. "Ação de mistura de praguicidas no sistema reprodutor de ratos Lewis machos". Universidade Estadual Paulista (UNESP), 2012. http://hdl.handle.net/11449/104581.
Pełny tekst źródłaConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Levantamento feito pelo Programa de Análise de Resíduos de Agrotóxicos em Alimentos (PARA) apontaram resíduos de agrotóxicos em alimentos frescos à disposição da população brasileira. Esses resíduos apresentaram-se acima do permitido, ou representavam ingredientes ativos não autorizados para determinadas culturas. Situações como estas têm aumentado a preocupação quanto a exposição prolongada de consumidores a múltiplos agentes potencialmente nocivos. Há pouca informação experimental sobre se, e como, exposições múltiplas ou a misturas podem afetar a saúde. O presente estudo objetivou avaliar os efeitos de uma mistura de cinco praguicidas sobre o sistema reprodutor do rato macho. Para compor a mistura que foi adicionada à ração em níveis de NOEL/NOAEL ou LOEL/ LEL/LOAELs, foram selecionados cinco praguicidas cujos resíduos foram detectados em tomates pela ANVISA em 2004. Foram constituídos oito grupos de acordo com o tipo de ração: Grupo 1- ração basal, sem praguicidas; Grupo 2 (“Baixas doses” ou praguicidas de acordo com seus respectivos NOEL/NOAELs) - diclorvós 0,23 mg/kg, dicofol 0,22 mg/kg, endosulfan 0,6 mg/kg, dieldrin 0,025 mg/kg, permetrina 5,0 mg/kg; Grupo 3 (“Doses efetivas”, de acordo com respectivos LOEL/LEL/LOAEL) - diclorvós 2,3 mg/kg, dicofol 2,5 mg/kg, endosulfan 2,9 mg/kg, dieldrin 0,05 mg/kg, permetrina 25,0 mg/kg e Grupos 4 a 8 - rações contendo cada praguicida em separado, em concentrações de acordo com os respectivos LOEL, LEL ou LOAEL. Os animais foram sacrificados no final da 8ª. semana de tratamento. O modelo utilizado permitiu verificar que a mistura em “baixas doses” aumentou o peso relativo dos testículos, mas não causou alterações morfológicas nesse órgão, nem alterou a dinâmica da espermatogênese e função testicular. Níveis séricos de FSH e testosterona...
Not available
Martinez, Meire França. "Ação de mistura de praguicidas no sistema reprodutor de ratos Lewis machos /". Botucatu, 2012. http://hdl.handle.net/11449/104581.
Pełny tekst źródłaBanca: Luis Antonio Justulin Junior
Banca: Patrícia Fernanda Felipe Pereira
Banca: Carla Adriane da Silva Franchi
Banca: Silvia Berlanga De Moraes Barros
Resumo: Levantamento feito pelo Programa de Análise de Resíduos de Agrotóxicos em Alimentos (PARA) apontaram resíduos de agrotóxicos em alimentos frescos à disposição da população brasileira. Esses resíduos apresentaram-se acima do permitido, ou representavam ingredientes ativos não autorizados para determinadas culturas. Situações como estas têm aumentado a preocupação quanto a exposição prolongada de consumidores a múltiplos agentes potencialmente nocivos. Há pouca informação experimental sobre se, e como, exposições múltiplas ou a misturas podem afetar a saúde. O presente estudo objetivou avaliar os efeitos de uma mistura de cinco praguicidas sobre o sistema reprodutor do rato macho. Para compor a mistura que foi adicionada à ração em níveis de NOEL/NOAEL ou LOEL/ LEL/LOAELs, foram selecionados cinco praguicidas cujos resíduos foram detectados em tomates pela ANVISA em 2004. Foram constituídos oito grupos de acordo com o tipo de ração: Grupo 1- ração basal, sem praguicidas; Grupo 2 ("Baixas doses" ou praguicidas de acordo com seus respectivos NOEL/NOAELs) - diclorvós 0,23 mg/kg, dicofol 0,22 mg/kg, endosulfan 0,6 mg/kg, dieldrin 0,025 mg/kg, permetrina 5,0 mg/kg; Grupo 3 ("Doses efetivas", de acordo com respectivos LOEL/LEL/LOAEL) - diclorvós 2,3 mg/kg, dicofol 2,5 mg/kg, endosulfan 2,9 mg/kg, dieldrin 0,05 mg/kg, permetrina 25,0 mg/kg e Grupos 4 a 8 - rações contendo cada praguicida em separado, em concentrações de acordo com os respectivos LOEL, LEL ou LOAEL. Os animais foram sacrificados no final da 8ª. semana de tratamento. O modelo utilizado permitiu verificar que a mistura em "baixas doses" aumentou o peso relativo dos testículos, mas não causou alterações morfológicas nesse órgão, nem alterou a dinâmica da espermatogênese e função testicular. Níveis séricos de FSH e testosterona... (Resumo completo, clicar acesso eletrônico abaixo)
Abstract: Not available
Doutor
Mlčoch, Marek. "Kumulace biologických dat". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219246.
Pełny tekst źródłaFortes, Caio. "Produtividade de cana-de-açúcar em função da adubação nitrogenada e da decomposição da palhada em ciclos consecutivos". Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/64/64134/tde-03112010-005326/.
Pełny tekst źródłaThis work aimed to relate the agroindustrial yield of sugarcane with nitrogen (N) fertilization in successive cropping cycles in plant-cane and ratoons under minimum tillage system - without soil plowing or interows scarification in crop renewal and after the harvesting seasons, respectively - and to quantify the contribution of straw from mechanical harvesting on crop N nutrition. The field trial was planted in March 2005 in a very clayey Rhodic Eutrustox at Santa Terezinha Farm, Jaboticabal, Sao Paulo State and was conducted during four consecutive cropping cycles until July 2009. The plant-cane trial was designed as randomized blocks with four treatments (N-urea in increasing rates 0, 40, 80 and 120 kg ha-1 at planting added to 120 kg ha-1 P2O5 and K2O) and four replicates (48 furrows of 15 m length). For the ratoon-cane trial, (1st to 3rd ratoons) the plant-cane plots were subdivided into other four treatments (0, 50, 100 and 150 kg ha-1 N) and four replicates (12 rows x 15 m). The N fertilization of the 3rd ratoon was leveled to 100 kg ha-1 in all plots in order to detect residual effects of previous N fertilizations on sugarcane yield in this cycle. All ratoon cycles also received 150 kg ha-1 K2O as KCl. It has been installed microplots containing 15N-urea and/or 15N-labeled plant material at the 80 kg ha-1 N dose in plant-cane, simulating the crop residues prior to renewal (trash PAR or rhizomes, RAR of RB855536 variety) and which remained in soil after minimum tillage. The objective was to assess the contribution of N-fertilizer and N-residues in sugarcane N nutrition in consecutive cycles. After the plant-cane harvesting, new microplots containing post harvest trash (PPC-15N, variety SP81-3250) were placed in treatments 80-0 and 80- 150 kg N ha-1 in plant-cane and ratoons, respectively, aiming to assess the contribution of N-PPC in crop nutrition and the influence of N applied to ratoons in the N-PPC availability for sugarcane uptake. An additional study was conducted in litter bags containing PAR-15N in plant-cane (dose 80 kg ha-1 N) and PPC-15N in ratoons (doses 80-0 and 80-150 kg N ha-1) in order quantify the decomposition of trash during the crop cycles and possible differences in the decomposition rates due to N applications in plant-cane (PAR) and ratoons (PPC), respectively. In the four consecutive cycles were evaluated: i) Agroindustrial yields (TCH, Mg cane ha-1 stalks and TPH, Mg ha-1 of sugar) and raw material quality (pol% cane and fiber%) in plantcane and ratoon treatments; ii) Recovery of urea-15N, PAR-15N, 15N- RAR and 15NPPC by crop above ground parts (stalks, dry leaves and tips) and carbon (C) and N balances in the soil-plant system and iii) decomposition of PAR and PPC as reduction of dry matter (DM), C, nutrients (N, P, K, Ca, Mg and S) and structural carbohydrates (lignin cellulose and hemicellulose). The agroindustrial yields (TCH and TPH) were influenced by N rates at planting and subsequent ratoons. It hás been found linear response in crop yield due to N rates at planting and in the average of four crop cycles. However, no responses were detected in the interaction between 12 N doses in plant or ratoon cane. The highest accumulated yield (TCH) in four consecutive cycles was obtained in treatment 120-100 kg ha-1 N in plant-cane and ratoons, but treatment 120-50 kg ha-1 N has been found as the more economically viable. The recovery of N-urea applied in plant-cane was higher in the first cycle (24, 7 kg ha-1 or 31% of the applied dose) and decreased over subsequent crop cycles (5%, 4% and 3% respectively). The N balance after four cycles (2006-2009) showed 43% (34.4 kg ha-1) of total N-urea recovery by the crop above ground parts, 0.2% was found in the rhizomes, 20% in soil and 37% were counted as losses. Cane trash N-PAR and N-RAR recoveries in the above ground parts were 28% and 23% of the initial amount of N applied as crop residues (14.2 and 7.4 kg ha-1, respectively). On average, 0.2% of N-plant residues remained in the rhizomes, 52% in the soil and 22% were accounted as losses. The total recovery of N-PAR N-and RAR was 24.4 kg, or 39% of the total N of these residues, indicating that they are long term N sources for the sugarcane crop. There had been found a close correlation between the cumulative recovery of N-urea and N-residues with the accumulated evapotranspiration of the four crop cycles. The N-PPC recovery by sugarcane above ground parts almost doubled after three cycles due to N application in ratoons, 17% vs. 31% (6.9 and 12.6 kg ha-1 N, respectively). In other compartments, 0.3% and 0.4% of N-PPC remained in the rhizomes, 69% and 61%) in the soil and 13.4% and 7.6%) resulted in losses. There was detected no major changes in soil C and N stocks C due to the addition of N-urea and N-residues. The decomposition of PAR and PPC was influenced by N fertilizations in plant-cane and ratoons cane and by biological action over the cropping cycles. The major effects detected as trash decomposed over the agricultural cycles were the reduction in residues C:N ratio, sugarcane root growth under the trash blanket, and losses of DM, C, N, macronutrients and structural carbohydrates. The DM degradation of PAR and PPC was 96% and 73% after four and three years respectively. The nutrients that showed higher release rates were K 98% to 92%, Mg 97% to 70% Ca and 95% to 55% of the initial amount of nutrients (kg ha-1) sourced by PAR and PPC residues, respectively. After four agricultural cycles, the levels (g kg-1) of lignin, cellulose and hemicellulose from PAR decreased 60%, 29% and 70%, and for PPC the reduction was 47%, 35% and 70% in three cycles. The degradation of structural carbohydrates was influenced by climatic conditions that occurred during the agricultural cycles and the initial biochemical composition those residues (total carbohydrates and nutrients content). There was no difference in DM degradation of PPC due to N application in ratoons, however there were differences in C degradation, in the release of Ca, concentration of roots and in the decomposition of lignin when N- fertilizer has been applied over the trash blanket
Avelino, Neto Sebastião. "Estudo da remoção de metais por leitos cultivados utilizando a fluorescência de raios X por reflexão total com radiação síncrotron". [s.n.], 2008. http://repositorio.unicamp.br/jspui/handle/REPOSIP/258646.
Pełny tekst źródłaTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo
Made available in DSpace on 2018-08-16T10:36:10Z (GMT). No. of bitstreams: 1 AvelinoNeto_Sebastiao_D.pdf: 6321049 bytes, checksum: a54827db20bdd0eedb9943b48ef60d17 (MD5) Previous issue date: 2008
Resumo: O presente trabalho teve como objetivo avaliar a operação e o desempenho de seis Leitos Cultivados de Fluxo Subsuperficial que operaram como pós-tratamento de um Tanque Séptico Modificado, instalados na Faculdade de Engenharia Agrícola da Universidade Estadual de Campinas. O sistema em estudo é composto por três leitos retangulares e três quadrados, dispostos em paralelo. Como meio suporte utilizou-se brita e foram cultivadas duas espécies de macrófitas emergentes (Typha sp. e Eleocharis sp.). Foi estudado o desempenho do leito cultivado para diferentes tempos de detenção hidráulicos e para isto foram coletadas amostras das folhas das macrófitas, do perfil do meio suporte em diferentes profundidades, da água residuária no afluente e no efluente de cada leito cultivado. Para a análise quantitativa foi empregada a técnica de Fluorescência de Raios X por Reflexão Total com Radiação Síncrotron. Para a avaliação do desempenho dos leitos estudados as concentrações de Cr, Mn, Fe, Cu, Zn e Pb foram avaliadas nas folhas das macrófitas, no meio suporte, no afluente e no efluente. Foi verificado que o desempenho do leito quadrado cultivado com Eleocharis foi superior ao retangular para os seguintes elementos: Mn, Fe, Cu e Zn. Para os elementos Cr e Pb o leito retangular cultivado com Eleocharis teve um melhor desempenho. Verificou-se que tanto no leito quadrado quanto no retangular as folhas de Eleocharis e Typha apresentaram eficiência de remoção superior a do meio suporte. Assim como no leito cultivado com Eleocharis, foi observado um melhor desempenho do leito cultivado com Typha quadrado para Mn, Fe, Cu e Zn, enquanto que para Cr e Pb o leito cultivado com Typha retangular apresentou melhor desempenho. No sistema de leito cultivado de geometria quadrada com Typha e Eleocharis e Controle removeram os metais Fe, Cu e Zn a limites permitidos pela legislação em qualquer dos tempos de detenção hidráulico empregado. No entanto para a remoção de Cr a níveis estabelecidos pela legislação é recomendado a operação do sistema com tempo de detenção hidráulico de 4 dias, e para Pb os tempos de detenção hidráulico recomendados são os de 4 e 6 dias. Para o leito retangular cultivado com Eleocharis e Typha, assim como no leito controle podemos observar que para os elementos Fe, Cu e Zn, as concentrações estão abaixo dos valores máximos permitidos pela legislação de lançamento de efluentes, para todos os tempos de detenção hidráulico. Entretanto para uma remoção eficiente de Cr, Mn e Pb os tempos de detenção de 4 e 6 dias são os mais recomendados para a operação do sistema. Os leitos controles quadrado e retangular tiveram eficiência de remoção inferior ao dos leitos cultivados com as macrófitas. O meio suporte nas profundidades de 10, 30 e 50 cm do leito cultivado de geometria quadrado e retangular cultivados com as macrófitas Typha sp. e Eleocharis sp., removeu os metais Cr, Mn, Fe, Cu, Zn e Pb de forma semelhante, ou seja, não houve uma profundidade que tivesse eficiência de remoção superior as demais
Abstract: The purpose of this work was evaluated the operation and performance of six constructed wetland of subsuperface flow, operating as post-treatment of a septic tank, installed on Agricultural Engineering College at University of Campinas. The system in study containing three square units, disposed in parallel. The substrate used was gravel and two emergent macrophytes species were cultivated (Typha sp. and Eleocharis sp.). The performance of the units were studied for different hydraulic residence times (2, 3, 4 and 6 days) and for this leaf of the macrophytes, substrate in different depths, wastewater in all units were collected. For quantitative analysis Synchrotron Radiation Total Reflection X-ray Fluorescence technique was employed. For evaluation of the performance in the constructed wetlands concentrations of Cr, Mn, Fe, Cu, Zn e Pb in leaf macrophytes, substrate, entrance and exit of the system were determined. The performance of the square unit with Eleocharis was higher than rectangular shape for Mn, Fe, Cu and Zn elements. For Cr and Pb the rectangular unit with Eleocharis presented better performance. Leaf of Eleocharis and Typha showed removal efficiency higher than substrate for square and rectangular units. As in the unit with Eleocharis a better perfomance was observed in a square unit cultivated with Typha for Mn, Fe, Cu and Zn, while for Cr and Pb the rectangular shape with Typha presented better performance. In the square system cultivated with Typha, Eleocharis and the control removed Fe, Cu and Zn to levels permitted by the legislation for all hydraulic residence times. Moreover for Cr removal to levels established by the legislation the operation with 4 days of hydraulic residence time was indicated and for Pb the recommended times were 4 and 6 days. For rectangular systems cultivated with Eleocharis and Typha, as the control unit, Fe, Cu and Zn, concentrations were smaller than the permissive values established by the legislation for all hydraulic residence times. By the order hand for a efficient removal of Cr, Mn and Pb the residence times of 4 and 6 days were most recommended for the system operation. Square and rectangular control units showed efficiency removal smaller than units containing the macrophytes. The removal of Cr, Mn, Fe, Cu, Zn and Pb metals by the substrate in 10, 30 and 50 cm depths of square and rectangular shapes cultivated with the two macrophytes showed no significative difference
Doutorado
Recursos Hidricos
Doutor em Engenharia Civil
Clark, Tad Dee. "An Analysis of Microstructure and Corrosion Resistance in Underwater Friction Stir Welded 304L Stainless Steel". Diss., BYU ScholarsArchive, 2005. http://contentdm.lib.byu.edu/ETD/image/etd872.pdf.
Pełny tekst źródłaSouza, Luciana Carla Ferreira de. "Avaliação de metais em esgoto e lodo gerado em estações de tratamento, nos municípios de Jaguariúna e Campinas, empregando a fluorescência de raios x por reflexão total com radiação síncrotron (SR-TXRF)". [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/258555.
Pełny tekst źródłaTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo
Made available in DSpace on 2018-08-22T06:30:46Z (GMT). No. of bitstreams: 1 Souza_LucianaCarlaFerreirade_D.pdf: 23739098 bytes, checksum: 19ea527d066d2fff5ef81495ee85ff0f (MD5) Previous issue date: 2013
Resumo: O rápido crescimento urbano e industrial nas ultimas décadas provocou alterações no meio ambiente, dentre eles a poluição dos corpos d'água, principalmente por metais que podem causar danos a saúde humana. Os municípios de Campinas e Jaguariúna estão inseridos na Região Metropolitana de Campinas (RMC), uma das regiões mais dinâmicas no cenário econômico brasileiro. Portanto, visando estudar a influencia antropogenica das cidades, foi avaliada a qualidade do efluente bruto e tratado e, do lodo gerado na estação de tratamento de esgoto de Anhumas, no município de Campinas e na estação de tratamento Camanducaia no município de Jaguariúna, ambas no estado de São Paulo, principalmente no que se refere à contaminação por metais. As analises foram realizadas pela técnica de Fluorescência de Raios X por Reflexão Total com Radiação Sincrotron (SR-TXRF) e os resultados comparados com as legislações vigentes. Para o efluente tratado os dados foram comparados as legislações CONAMA 357 e 430 que estabelecem limites para o descarte de efluentes nos corpos d'água e todos os elementos Cr, Mn, Fe, Ni, Cu, Zn, Ba e Pb apresentaram concentrações em conformidade com a legislação. Para o reuso na agricultura, cujos limites são definidos pela Instrução Técnica CETESB alguns dos elementos apresentaram concentrações acima do permitido e desta forma o efluente tratado não pode ser empregado para reuso. No caso do lodo os teores de Cr, Ni, Cu, Zn, Ba e Pb foram comparados aos valores máximos permitidos das legislações CONAMA 357 e 430 e os teores de todos os elementos ficaram abaixo do valor Maximo permitido, e desta forma existe a possibilidade de aplicação do lodo no solo agrícola, para as duas estações de tratamento de esgoto estudadas, Anhumas (Campinas) e Camanducaia (Jaguariúna)
Abstract: The rapid urban and industrial growth in recent decades caused changes in the environment, including pollution of water bodies, mainly of metals that can cause harm to human health. The cities of Campinas and Jaguariuna are inserted in the Metropolitan Region of Campinas (MRC), one of the most dynamic regions in the Brazilian economy. Therefore, to study the influence of anthropogenic citiesit was evaluated the quality of raw and treated wastewater and sludge generated in the wastewater treatment plant of Anhumas, in Campinas and the treatment plant in the municipality of Camanducaia Jaguariuna, both in state of Sao Paulo, particularly with regard to metal contamination. Analyses were performed by the technique of X-ray Fluorescence by Total Reflection with Synchrotron Radiation (SR-TXRF) and the results compared with existing laws. For the treated effluent data were compared laws CONAMA 357 and 430 that set limits for the discharge of effluents into water bodies and all the elements Cr, Mn, Fe, Ni, Cu, Zn, Pb and Ba concentrations presented in accordance with legislation. To reuse in agriculture, whose limits are defined by the Technical Instruction CETESB some elements had concentrations above the permitted and thus the treated effluent can't be used for reuse. In the case of sludge contents of Cr, Ni, Cu, Zn, Ba and Pb were compared with maximum permissible values of the laws CONAMA 357 and 430 and the contents of all elements were below the maximum allowable value, and thus it is possible application of sludge to agricultural soil, for the two sewage treatment stations studied, Anhumas (Campinas) and Camanducaia (Jaguariuna)
Doutorado
Saneamento e Ambiente
Doutora em Engenharia Civil
Kubík, Adam. "Kumulace biologických signálů". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219514.
Pełny tekst źródłaBaumgarten, Lars. "Gesteinsmechanische Versuche und petrophysikalische Untersuchungen – Laborergebnisse und numerische Simulationen". Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2016. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-202612.
Pełny tekst źródłaFornari, Marilda Menchon Tavares. "Aplicação da técnica de eletro-floculação no tratamento de efluentes de curtume". Universidade Estadual do Oeste do Parana, 2008. http://tede.unioeste.br:8080/tede/handle/tede/1866.
Pełny tekst źródłaIn the present work has been studied the electro-flocculation efficiency on the reduction of organic and inorganic material concentrations such as Chemical Oxygen Demand (COD), turbidity, total solids and metal, mainly chromium, on an untreated tannery effluent using a pair of electrodes. For this purpose, a lab scale Electro-Flocculation (EF) reactor was constructed using an 8-L plastic cylindrical container, containing a valve in its lower part for sludge evacuation and a horizontal support in its upper part for fixing a pair of electrolytic cell in upright position into a 5-L available reactor volume. The electrodes plates, made of iron or aluminum, were connected to terminals of direct current power supply. All the physical-chemistry parameters were measured following the Standard Methods for water analysis, while metal concentrations were determined using the Synchrotron X-Ray Fluorescence technique, available in the Brazilian Synchrotron Light Laboratory. In order to determine optimal operating conditions, the effects of current intensity, electrodes distance, effluent initial pH, and EF time have been experimentally examined, according to a statistic planning and correlation analysis. For each electrode, a total of 11 EF experiments were carried out for maximum and minimum values of EF reactor operating parameters. Applying a 95% confidence level into the correlation analysis between EF parameters, the physical-chemistry parameters and metal concentrations were reduced in all of them when the effluent initial pH was increased, while the EF time and the applied voltage were reduced for small electrodes distances. Moreover, the EF treatment efficiencies tend towards higher values with an increasing on the current intensity. In order to determine the best reactor operating values, other EF experiments were performed varying the effluent initial pH from 6.5 to 9.0 and from 6.0 to 8.5 for iron and aluminum electrodes, respectively, fixing the distance between the electrodes in 4.0 cm, the current intensity in 5.5 A and the EF time in 30 minutes. Nevertheless, these EF experiments have shown that the reduction factor on parameter concentrations due to an increasing of effluent initial pH was not significant compared to prior experiments. Henceforth, the effluent pH value was maintained near to the original one for the next EF treatments, avoiding introducing other substances into the effluent. Keeping effluent pH value in 7.5, other EF experiments were performed changing the EF time from 15 to 120 min., fixing current intensities and electrode distances in 5.5 A and 4.0 cm, respectively. For these reactor conditions, the EF time setting up in 30 min. was enough to get a good efficiency according the reduction factor in the most of parameters examined, without increasing a lot the reactor electrical power, for both kinds of electrodes. The EF reactor purpose and examined has shown a high efficiency on turbidity and chromium concentration reduction factor (98%). Furthermore, this system can be also used to reduce other elementary concentrations such as calcium, potassium and zinc, for both kinds of electrodes (Fe/Al). In comparison with iron electrodes, aluminum one has reported a better reduction factor (80%) on COD values and a good reduction factor (50%) on iron concentration. On the other hand, the EF method for tanneries effluent treatment system was also compared with conventional method using coagulating and flocculating agents, showing a great similarity between them in the reduction factor. In the EF method is not necessary to introduce substances to start the coagulation and flocculation process in effluent treatment.
Este trabalho tem por objetivo o estudo da eficiência da eletro-floculação na redução das concentrações de substâncias orgânicas e inorgânicas expressas através dos parâmetros: Demanda Química de Oxigênio (DQO), turbidez, sólidos totais e metais, principalmente o cromo, em efluente de curtume não tratado, utilizando um par de eletrodos. Para esse propósito foi construído, em escala laboratorial, um reator confeccionado a partir de um recipiente plástico de 8 litros, contendo uma válvula na parte inferior, para a retirada dos sedimentos, e um suporte horizontal na parte superior para a fixação do par de células eletrolíticas, em posição perpendicular dentro do reator com volume útil de 5 litros. As placas de eletrodos, de ferro e alumínio, foram conectadas a uma fonte de alimentação de energia.Todos os parâmetros físico-químicos foram determinados seguindo o Método Padrão para análise de água, enquanto que as concentrações de metal foram determinadas através da técnica de Fluorescência de Raios X por Reflexão Total, (SR-TXRF), disponível no Laboratório Nacional de Luz Síncroton. A fim de determinar as condições ótimas de operação, os efeitos da intensidade da corrente, distância entre eletrodos, pH inicial do efluente e tempo de eletrólise foram avaliados experimentalmente, de acordo com um planejamento estatístico e análise de correlação. Para cada eletrodo, foram realizados 11 experimentos de EF com valores máximos e mínimos para os parâmetros de operação do reator. Empregando um nível de 95% de confiança na correlação de análises dos parâmetros a análise de correlação entre os parâmetros de EF, os modelos mostraram tendência de redução nas concentrações dos parâmetros físico-químicos e de metais, quando o pH inicial do efluente foi elevado, enquanto o tempo de EF e a voltagem aplicada apresentaram tendência de redução nos valores para uma menor distância entre os eletrodos.. Além disso, a eficiência do tratamento de EF tende a valores mais elevados com o aumento na intensidade de corrente. A fim de determinar as melhores condições de operação do reator, outros experimentos EF foram feitos variando o pH inicial de 6.5 a 9.0 e de 6.0 a 8.5 para eletrodos de ferro e alumínio, respectivamente, fixando a distância entre os eletrodos em 4.0 cm, a intensidade da corrente em 5.5 A e o tempo de EF em 30 minutos. Entretanto, esses experimentos mostraram que o fator de redução percentual na concentração dos parâmetros, causada pelo aumento no pH inicial do efluente, não foi significativo comparado aos experimentos anteriores. Nos tratamentos posteriores de EF, o pH do efluente foi mantido próximo ao original, evitando a introdução de outras substâncias no efluente. Mantendo o valor do pH do efluente em 7.5, outros experimentos de EF foram realizados variando o tempo de eletrólise de 15 a 120 min., e fixando a intensidade da corrente e distância entre os eletrodos em 5.5 A e 4.0 cm., respectivamente. Nessas condições, o tempo de EF fixado em 30 min. foi suficiente para alcançar uma boa eficiência, de acordo com o fator de redução, para maioria dos parâmetros analisados, sem aumentar muito a potência elétrica do reator, para os dois tipos de eletrodos. Os experimentos realizados com reator de EF mostraram uma alta eficiência na redução da turbidez e concentração de cromo (98%). Ademais, esse sistema também pode ser utilizado na redução de outras concentrações elementares como cálcio, potássio e zinco, para ambos os tipos de eletrodos (Fe/Al). Em comparação com os eletrodos de ferro, o eletrodo de alumínio apresentou um melhor fator de redução nos valores de DQO (80%) e um bom fator de redução de ferro (50%). Por outro lado, o método de EF para o tratamento de sistema de efluentes de curtumes foi também comparado ao método convencional utilizando agentes coagulantes e floculantes, mostrando uma grande semelhança entre eles no fator de redução. No método EF não é necessário introduzir substâncias para iniciar o processo de coagulação e floculação no tratamento de efluente.
Orire, Endurance. "The techno-economics of bitumen recovery from oil and tar sands as a complement to oil exploration in Nigeria / E. Orire". Thesis, North-West University, 2009. http://hdl.handle.net/10394/5704.
Pełny tekst źródłaThesis (M.Ing. (Development and Management))--North-West University, Potchefstroom Campus, 2010.
鍾東志. "Residual strength ratio of crosstie after twenty years service". Thesis, 2003. http://ndltd.ncl.edu.tw/handle/81154668207619405192.
Pełny tekst źródłaJen, Yi-Fan, i 任逸凡. "Study on the Relationship between Price Book Ratio and Residual Earnings". Thesis, 2011. http://ndltd.ncl.edu.tw/handle/02265618564583524082.
Pełny tekst źródła國立交通大學
管理學院財務金融學程
99
Based on residual earnings model, those companies could create higher residual earnings, their intrinsic value would be higher, and this study primarily investigates the relationship between residual earnings and company value in Taiwan stock market to proof that our result is consistent with residual earnings model. That is, the market would give companies higher valuation if they have higher residual earnings. Our research use rank-order correlation coefficient to test whether price book ratio and residual earnings are positively correlated, we use two statistics methods: Spearman and Kendall rank-order correlation coefficient to test. The results show us that price book ratio and residual earnings have significant positive correlation in Taiwan stock market. In order to ensure that our research on the relationship between price book ratio and residual earnings would not lose explanatory power by sample selection, our paper also investigate whether the relationship between price book ratio and residual earnings would be influenced by growth or value industry and let the original positive relation change. We find that the positive relation between price book ratio and residual earnings cannot be affected by belonging to growth or value industry. In other words, residual earnings model have reliability and is suitable for Taiwan capital market because its explanatory power would not be affected by different stock characteristics.
Liou, Jiann-Cherng, i 劉建成. "Residual Strain Ratio of No Plasticity Fine in Saturated Sand under Cyclic Loading". Thesis, 1994. http://ndltd.ncl.edu.tw/handle/42864365907818979218.
Pełny tekst źródłaZhang, Wei. "Cyclic strain impact on the residual electrical resisivity ratio of twisted high purity aluminum". 1994. http://catalog.hathitrust.org/api/volumes/oclc/32918974.html.
Pełny tekst źródłaTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 81-84).
Ting-Hu, Chien, i 胡建霆. "Voltage Holding Ratio and Residual-Direct-Current Characteristics in Stratified PolymerLiquid-Crystal Composite Films". Thesis, 2009. http://ndltd.ncl.edu.tw/handle/00978211251280507977.
Pełny tekst źródła中原大學
應用物理研究所
97
Voltage holding ratio (VHR) and residual direct current (RDC) of stratified polymerliquid-crystal films are investigated in this thesis. The auto-measurement system developed in this laboratory is used to monitor the VHR and RDC in standard cells of either liquid crystal or polymer alone and in asymmetric ones of polymerliquid-crystal layer hybrid with various polymer contents, clarifying the contributions of the liquid-crystal and polymer layers separately to the VHR and RDC of the stratified films. The thesis demonstrates: (1) the VHR of stratified polymerliquid- crystal films is dominated by the polymer concentration—the more the polymer content is, the higher the bulk resistance becomes, leading to the higher VHR; (2) the RDC of stratified samples depends on the polymeric structure—as the precursor concentration increases, the solidification process mitigates during photopolymerization and the polymeric surface becomes smoother, resulting in suppressed ion-adsorptive capability on the interface and, in turn, reducing the RDC; (3) the currentvoltage behavior of a stratified cell, again dictated by the polymer layer, is distinctive from that of a typical liquid-crystal cell.
Cheng, Hao-Wen, i 鄭皓文. "Voltage-Holding-Ratio and Residual-DC-Voltage Characteristics of Twisted-Nematic and Planar-Alignment Liquid-Crystal Cells". Thesis, 2013. http://ndltd.ncl.edu.tw/handle/20193968023445947370.
Pełny tekst źródła國立交通大學
光電系統研究所
102
According to the requirement on the detection of display performance in thin film transistor liquid crystal display (TFTLCD), a multi-functional instrument for the measurement of voltage holding ratio (VHR), residual direct current (RDC), and electro-optical characteristics of liquid crystal cells have been developed by our research group. In order to expand the application field and measurement range for abovementioned parameters, in this study, a simple temperature-control system consisting of heating chips and cooling systems is designed and combined into our proposed instrument. We also integrate various types of circuits and whole framework for the instrument to obtain highly automatic measurement and numerical analysis through the data acquisition and interface of virtual instrument control. Furthermore, electrical properties such as the VHR and RDC, of twisted nematic and planar-aligned liquid crystal cells under specific measuring conditions are presented.
Liao, Ming Gui, i 廖明癸. "New approach on the investigation of frozen skin ratio and residual stress in white-metzner injection flow field". Thesis, 1995. http://ndltd.ncl.edu.tw/handle/59683779658659059121.
Pełny tekst źródłaNoroozi, Amir. "Development of a Two-Parameter Model (Kmax, ΔK) for Fatigue Crack Growth Analysis". Thesis, 2007. http://hdl.handle.net/10012/3020.
Pełny tekst źródła江玉茹. "Estimation of the simultaneous confidence regions for the ratios of quantile residual lifetimes". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/75482525092373948978.
Pełny tekst źródła東海大學
統計學系
104
The estimation of mean residual lifetime or quantile residual lifetime is becoming more critical in cancer research, since it provides patients and physicians with information about the efficacy of the treatment therapies in a more straightforward way using the hazard function or probability of survival. In medical study, the multiple comparison procedures are the commonly used multiple decisions that assess the differences of the effects for several treatment groups, simultaneously. Because the simultaneous confidence regions maybe used for hypotheses testing, as well as providing the information about magnitudes of the differences between the survival indices of each treatment group. In this project for censored survival data, we consider the construction of the simultaneous confidence regions for the ratios of quantile residual lifetimes between the treatment group and the control group based on the nonparametric method and the empirical likelihood ratio tests. The performance of the associated coverage probability and the average coverage area will be investigated via a simulation study. The use of the proposed procedure will be illustrated using real data sets. Keywords : censored survival data; confidence region; minimum dispersion statistic; multiple comparison; quantile residual lifetime
Chen, Kuei-Luen, i 陳逵綸. "Residual Stress in GZO and IGZO Thin Films Prepared by Radio-Frequency Sputtering Technique". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/t835fr.
Pełny tekst źródłaPAI, TSAI-LING, i 白彩綾. "Integrating Dynamic Principal Component Analysis-Decorrelated Residuals with Generalized Likelihood Ratio Test for Autocorrelated Multivariate Process Fault Detection". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/595h64.
Pełny tekst źródła朝陽科技大學
工業工程與管理系
105
Principal Component Analysis (PCA) has been widely used for multivariate process fault detection. PCA can effectively detect process faults under the premise of independent observations. However, the acquired data from a real process usually exhibits autocorrelation characteristics. Therefore, Ku, Storer and Georgakis (1995) suggested to introduce lagged variables into original data matrix and then apply the traditional PCA algorithm to the augmented matrix, they called this method as Dynamic PCA (DPCA). Moreover, Rato and Reis (2013) discovered the T^2 and Q monitoring statistics calculated from DPCA still present autocorrelation. To tackle this issue, Rato and Reis (2013) developed a Dynamic PCA based on Decorrelated Residuals (DPCA-DR) method in an attempt to reduce the autocorrelation of T^2 and Q. Even though the implementation of DPCA-DR can lower the autocorrelation of monitoring metrics, the autocorrelation cannot be exterminated. Furthermore, T^2 and Q are essentially calculated from Mahalanobis distance in which only recent observation was taken into consideration, leading to an ineffective detection of a small process change. According to abovementioned, this study will develop a DPCA-DR-GLR in an effort to detect a wide range of process changes. The DPCA-DR-DR was used to reduce data dimensionality and reduce the autocorrelation of T^2 and Q. The Generalized Likelihood Ratio (GLR) is adopted as the monitoring statistic due to the simultaneous consideration of recent observation and past observations. The advantages of the proposed method includes : 1) can detect a wide range of process changes; 2) can estimate the process change point that will provide practitioner the fault diagnosed information; 3) no further parameters to be given during monitoring. The efficiency of the proposed method will be verified via three examples : a simulated multivariate autocorrelated process, Tennessee Eastman process and White-wine inspection. Result demonstrated that the proposed method can effectively detect multivariate autorrelated process faults.