Zaloguj się

Gotowe bibliografie tematyczne / Refractory materials / Artykuły w czasopismach

Artykuły w czasopismach na temat „Refractory materials”

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Refractory materials.

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 2 marca 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Refractory materials”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Albrecht, Gelon, Stefan Kaiser, Harald Giessen i Mario Hentschel. "Refractory Plasmonics without Refractory Materials". Nano Letters 17, nr 10 (8.09.2017): 6402–8. http://dx.doi.org/10.1021/acs.nanolett.7b03303.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Vakhula, Orest, Myron Pona, Ivan Solokha, Oksana Koziy i Maria Petruk. "Ceramic Protective Coatings for Cordierite-Mullite Refractory Materials". Chemistry & Chemical Technology 15, nr 2 (15.05.2021): 247–53. http://dx.doi.org/10.23939/chcht15.02.247.

Pełny tekst źródła

Streszczenie:

The issue of cordierite-mullite refractories protection from the influence of aggressive factors is considered. The interaction between the components of protective coatings has been studied. It has been investigated that in the systems based on poly(methylphenylsiloxane) filled with magnesium oxide, alumina and quartz sand, the synthesis of cordierite (2MgO•2Al2O3•5SiO2), mullite (3Al2O3•2SiO2) or magnesium aluminate spinel (MgO•Al2O3) is possible. The basic composition of the protective coating, which can be recommended for the protection of cordierite-mullite refractory, is proposed.

Style APA, Harvard, Vancouver, ISO itp.

3

Suvorov, S. A. "Elastic refractory materials". Refractories and Industrial Ceramics 48, nr 3 (maj 2007): 202–7. http://dx.doi.org/10.1007/s11148-007-0060-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Vakhula, Orest, Myron Pona, Ivan Solokha i Igor Poznyak. "Research of Corrosive Destruction Mechanism of Cordierite-Mullite Refractory Materials". Chemistry & Chemical Technology 4, nr 1 (20.03.2010): 81–84. http://dx.doi.org/10.23939/chcht04.01.081.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Simon, Franz-Georg, Burkart Adamczyk i Gerd Kley. "Refractory Materials from Waste". MATERIALS TRANSACTIONS 44, nr 7 (2003): 1251–54. http://dx.doi.org/10.2320/matertrans.44.1251.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Ismailov, M. B., i Zh A. Gabayev. "SHS of refractory materials". Journal of Engineering Physics and Thermophysics 65, nr 5 (1994): 1131–33. http://dx.doi.org/10.1007/bf00862048.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Dudnik, E. V., A. V. Shevchenko, A. K. Ruban, Z. A. Zaitseva, V. M. Vereshchaka, V. P. Red’ko i A. A. Chekhovskii. "Refractory and ceramic materials". Powder Metallurgy and Metal Ceramics 46, nr 7-8 (lipiec 2007): 345–56. http://dx.doi.org/10.1007/s11106-007-0055-z.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Seifert, Severin, Sebastian Dittrich i Jürgen Bach. "Recovery of Raw Materials from Ceramic Waste Materials for the Refractory Industry". Processes 9, nr 2 (26.01.2021): 228. http://dx.doi.org/10.3390/pr9020228.

Pełny tekst źródła

Streszczenie:

Products of the refractory industry are key for the production of heavy industry goods such as steel and iron, cement, aluminum and glass. Corresponding industries are dependent on thermal processes to manufacture their products, which in turn would not be possible if there were no refractory materials, such as refractory bricks or refractory mixes. For the production of refractory materials, primary raw materials or semi-finished products such as corundum, bauxite or zircon are used. Industrial recycling of refractory raw materials would reduce dependencies, conserve resources and reduce global CO2 emissions. Today, only a small quantity of the refractory materials used can be recycled because raw materials (regenerates) obtained from end-of-life materials are of insufficient quality. In this study, regenerates from different refractory waste products could be obtained using the innovative processing method of electrodynamic fragmentation. It was shown that these regenerates have a high chemical purity and are therefore of high quality. It could be confirmed that the use of these regenerates in refractory materials does not affect the characteristic properties, such as refractoriness and mechanical strength. Thus, electrodynamic fragmentation is a process, which is able to provide high-quality raw materials for the refractory industry from used materials.

Style APA, Harvard, Vancouver, ISO itp.

9

Zhang, Cai Li, i Xiao Qing Song. "Fabrication and Properties of New Building Materials by Reutilization Refractory Materials". Applied Mechanics and Materials 507 (styczeń 2014): 388–91. http://dx.doi.org/10.4028/www.scientific.net/amm.507.388.

Pełny tekst źródła

Streszczenie:

The utilization of domestic waste refractory materials are reviewed, and points out that China exists to the comprehensive utilization of waste refractory material in question, discusses the necessity of recycling of waste refractory material; focuses on the composite insulation board has the advantages of organic heat preservation material strength coefficient of heat conductivity of inorganic insulation materials of high and low flame retardant, for example discusses the feasibility of waste refractory materials used in building materials field, comprehensive recycling of waste refractory material resources and corresponding to focus attention on the utilization of the problems put forward their views.

Style APA, Harvard, Vancouver, ISO itp.

10

Mukasyan, A. S., i J. D. E. White. "Combustion joining of refractory materials". International Journal of Self-Propagating High-Temperature Synthesis 16, nr 3 (wrzesień 2007): 154–68. http://dx.doi.org/10.3103/s1061386207030089.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Joswiak, D. J., D. E. Brownlee, A. N. Nguyen i S. Messenger. "Refractory materials in comet samples". Meteoritics & Planetary Science 52, nr 8 (12.06.2017): 1612–48. http://dx.doi.org/10.1111/maps.12877.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Opachina, R. "Magnohrom: Producer of refractory materials". Refractories and Industrial Ceramics 40, nr 3-4 (marzec 1999): 174–75. http://dx.doi.org/10.1007/bf02762377.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Coughanowr, Corinne A., Bernard A. Dissaux, Rolf H. Muller i Charles W. Tobias. "Electrochemical machining of refractory materials". Journal of Applied Electrochemistry 16, nr 3 (maj 1986): 345–56. http://dx.doi.org/10.1007/bf01008844.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Averkov, E. I., i V. N. Zapechnikov. "Radiation properties of refractory materials". Refractories 31, nr 1-2 (styczeń 1990): 82–90. http://dx.doi.org/10.1007/bf01282493.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Hong-Xia, LI. "Development Overview of Refractory Materials". Journal of Inorganic Materials 33, nr 2 (2018): 198. http://dx.doi.org/10.15541/jim20170582.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Fleuriault, Camille, Joseph Grogan i Jesse White. "Refractory Materials for Metallurgical Uses". JOM 70, nr 11 (21.08.2018): 2420–21. http://dx.doi.org/10.1007/s11837-018-3096-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Bazhin, V. Yu, D. V. Makushin i Yu N. Gagulin. "Contemporary aluminum electrolyzer refractory materials". Refractories and Industrial Ceramics 49, nr 5 (wrzesień 2008): 334–35. http://dx.doi.org/10.1007/s11148-009-9093-z.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Antusch, Steffen, Jens Reiser, Jan Hoffmann i Alexandru Onea. "Refractory Materials for Energy Applications". Energy Technology 5, nr 7 (5.04.2017): 1064–70. http://dx.doi.org/10.1002/ente.201600571.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

HIRAOKA, Yutaka. "Joining of Refractory Metals and Refractory Metal-Based Composite Materials". Journal of Smart Processing 4, nr 2 (2015): 73–78. http://dx.doi.org/10.7791/jspmee.4.73.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Mansurov, Zulkhair A., i Sergey M. Fomenko. "Carbonaceous Refractory Materials on SHS-Technology". Advances in Science and Technology 88 (październik 2014): 94–103. http://dx.doi.org/10.4028/www.scientific.net/ast.88.94.

Pełny tekst źródła

Streszczenie:

This study contains results of carbonaceous SHS-refractory materials application for binding of the graphite products and melting of metals in the induction furnaces. The opportunity of producing strong graphite-graphite bond up to 5 MPa by means of the carbonaceous refractory material that demonstrated high chemical stability in the aggressive liquid metals and alloys environment has been shown. The results of the industrial tests of melting crucibles made of carbonaceous SHS-refractory materials have been presented in the case of aluminium melting. It has been shown that such crucibles stability is 5-6 times higher than that of standard graphite crucibles in aluminium melting conditions. The obtained research results testify that developed carbonaceous material is applied for lining of the induction furnace of melting unit is allow to increase the number of nonferrous metals (bronze) melting cycles from 5 to 6 times in comparison with the traditional graphite crucible melting. High chemical stability of the material to oxidizing environment as well as to metal melts is provided by formation of high-melting compounds in the carbonaceous exothermic systems during SHS-process.

Style APA, Harvard, Vancouver, ISO itp.

21

Niedzialek, Scott E., Gregory C. Stangle i Yoshinari Kaieda. "Combustion-synthesized functionally gradient refractory materials". Journal of Materials Research 8, nr 8 (sierpień 1993): 2026–34. http://dx.doi.org/10.1557/jmr.1993.2026.

Pełny tekst źródła

Streszczenie:

Functionally Gradient Materials (FGM's) are soon to be used in a variety of important commercial applications; joining and thermal barrier coatings are two of the most widely studied. FGM's of the TiC/NiAl and the TiC/Ni3Al systems were fabricated using a one-step, self-propagating high-temperature synthesis (SHS) and densification method. It was observed that ignition of the starting mixture for these two systems was affected by the initial sample temperature and the external pressure that was applied to the sample during the ignition stage. Quality of the final product (e.g., porosity, grain size, cracking and microcracking, etc.) depends on a number of factors during this one-step operation. Reaction temperature control is important and is necessary to minimize residual porosity of the final product. Particle size of reactant powders, as well as applied pressure, also has an effect on the resulting microstructure. If careful reaction temperature control is achieved, along with optimum reactant powder size and applied pressure, an FGM of minimal porosity is obtained without residual macrocracks. Further, this method can easily be used to fabricate an FGM with a highly precise composition and material properties gradient. Finally, this process results in FGM's of similar quality when compared to those prepared by existing fabrication methods at only a fraction of the cost. Most importantly, it is expected that this process can be scaled up with relative ease.

Style APA, Harvard, Vancouver, ISO itp.

22

Goberis, S. "Thermal Stability of Unshaped Refractory Materials". Refractories and Industrial Ceramics 44, nr 6 (listopad 2003): 427–30. http://dx.doi.org/10.1023/b:refr.0000016783.12573.36.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Rutman, D. S., E. V. Belyaeva i V. I. Sizov. "Prospective refractory materials for vacuum electrometallurgy". Refractories 28, nr 7-8 (lipiec 1987): 357–61. http://dx.doi.org/10.1007/bf01400023.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Yatsenko, N. D., i E. O. Rat’kova. "Refractory Ceramics Based on Local Materials". Glass and Ceramics 62, nr 1-2 (styczeń 2005): 16–18. http://dx.doi.org/10.1007/s10717-005-0021-5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Chen, Xin, i Dayakar Penumadu. "Characterizing microstructure of refractory porous materials". Journal of Materials Science 41, nr 11 (12.04.2006): 3403–15. http://dx.doi.org/10.1007/s10853-005-5342-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Olander, D. R. "Laser-pulse-vaporization of refractory materials". Pure and Applied Chemistry 62, nr 1 (1.01.1990): 123–38. http://dx.doi.org/10.1351/pac199062010123.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Boccaccini, D. N., M. Cannio, T. D. Volkov-Husoviæ, E. Kamseu, M. Romagnoli, P. Veronesi, C. Leonelli, I. Dlouhy i A. R. Boccaccini. "Service life prediction for refractory materials". Journal of Materials Science 43, nr 12 (czerwiec 2008): 4079–90. http://dx.doi.org/10.1007/s10853-007-2315-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Palčo, Štefan, i Frantisek Tomšů. "Refractory Materials, Furnaces and Thermal Insulations". Interceram - International Ceramic Review 67, nr 4 (lipiec 2018): 12–15. http://dx.doi.org/10.1007/s42411-018-0025-0.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Palčo, Štefan, i Frantisek Tomšů. "Refractory Materials, Furnaces and Thermal Insulations". Interceram - International Ceramic Review 67, S1 (wrzesień 2018): 18–21. http://dx.doi.org/10.1007/s42411-018-0042-z.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Cölle, D., M. Jung, H. Gross i A. Belyanin. "Cement-free spinel-based refractory materials". Refractories and Industrial Ceramics 46, nr 4 (lipiec 2005): 256–59. http://dx.doi.org/10.1007/s11148-006-0020-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

Tabereaux, Alton T. "Reviewing advances in cathode refractory materials". JOM 44, nr 11 (listopad 1992): 20–26. http://dx.doi.org/10.1007/bf03222837.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Zemlyanoi, K. G., i A. R. Khafizova. "Synthetic raw materials - possibility to increase refractory materials resistance". IOP Conference Series: Materials Science and Engineering 966 (14.11.2020): 012045. http://dx.doi.org/10.1088/1757-899x/966/1/012045.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Olasupo, O. A., i J. O. Borode. "Development of Insulating Refractory Ramming Mass from Some Nigerian Refractory Raw Materials". Journal of Minerals and Materials Characterization and Engineering 08, nr 09 (2009): 667–78. http://dx.doi.org/10.4236/jmmce.2009.89058.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Il'in, G. I. "The recycling materials using in the refractory production". NOVYE OGNEUPORY (NEW REFRACTORIES), nr 7 (25.12.2018): 13–16. http://dx.doi.org/10.17073/1683-4518-2018-7-13-16.

Pełny tekst źródła

Streszczenie:

The investigating results are given for the ferrouschromium slags using as the refractory materials to prepare the refractory concretes. The temperature range of their application was defned. It was established that the magnesia oxide addition considerably reduced the Chromium VI formation during service in composition of the refractory materials manufactured on base of the ferrous-chromium slags. Ref. 5. Tab. 4.

Style APA, Harvard, Vancouver, ISO itp.

35

Klyushnikov, A. M., E. N. Selivanov, K. V. Pikulin, V. V. Belyaev, A. B. Lebed' i L. Yu Udoeva. "The periclase-chromite refractory decomposition by the action of the pulverized coal and gas medium in course of copper-sulfide raw materials processing". NOVYE OGNEUPORY (NEW REFRACTORIES), nr 12 (25.12.2018): 31–36. http://dx.doi.org/10.17073/1683-4518-2018-12-31-36.

Pełny tekst źródła

Streszczenie:

The investigating results are given for the periclase-chromite refractories' composition and structure which are in contact with the pulverized coal and gas medium in the coppersulfide smelting furnaces. The high-temperature burnt copper concentrate and the sulfur dioxide gas suspensions combined action changes the surface and deep refractories layers chemical composition, with that the impurities content reach the value in weight percent: Fe 54,0, Cu 7,2, Zn 6,4, S 1,8. The refractory's surface layer saturation with the iron and non-ferrous metals oxides decreases the porosity and gives rise to low-melting compositions and eutectics. The refractory decomposition is induced by the shelling of the refractory surface layers with the filled porous taking place in course of the heating-cooling cycling because of the phase's thermal linear expansion coefficients. When the spent refractory disposal, it is feasible to separate mechanically the surface layer for the non-ferrous metals extracting, the rest part can be used for obtaining the refractory powder of various purpose.

Style APA, Harvard, Vancouver, ISO itp.

36

Zabolotskii, A. V., i V. T. Khadyev. "Nanomaterials in the production of refractory materials". Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 76, nr 8 (3.09.2020): 873–77. http://dx.doi.org/10.32339/0135-5910-2020-8-873-875.

Pełny tekst źródła

Streszczenie:

On June 17, 2020 the International Scientific and Practical Online Conference “Current Trends in Application of Nano-Materials in Production of Refractories” was held. The conference was organized by “Magnezit” Group in cooperation with Wuhan University of Science and Technology, Fund of infrastructure and educational programs of ROSNANO group and National Research Technological University MISiS (Moscow). Leading specialists of practical work and experts from universities of Russia, China, Lithuania, the Netherlands and the USA delivered reports. Results of studies obtained in research laboratories and at industrial sites were presented by authors of 9 reports. The conference brought together about 300 participants, at that more than 60 participants had a chance to take part in the discussions and put questions to the speakers, and 200 listeners were observing the event by on-line transmission.

Style APA, Harvard, Vancouver, ISO itp.

37

Young, D. J. "Gas Corrosion of High Performance Refractory Materials". Materials Science Forum 34-36 (styczeń 1991): 651–55. http://dx.doi.org/10.4028/www.scientific.net/msf.34-36.651.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Mikhailova, T. V. "Occupational health at enterprises producing refractory materials". Ukrainian Journal of Occupational Health 2005, nr 2 (30.06.2005): 71–79. http://dx.doi.org/10.33573/ujoh2005.02.071.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Kakroudi, Mahdi Ghassemi, i Shahin Khameneh Asl. "High Temperature Elastic Properties of Refractory Materials". Materials Science Forum 673 (styczeń 2011): 59–64. http://dx.doi.org/10.4028/www.scientific.net/msf.673.59.

Pełny tekst źródła

Streszczenie:

A pulse-echo technique, based on ultrasonic "long-bar" mode (LBM) velocity measurements, working up to 1700°C is described. Magnetostrictive transducers and ultrasonic lines used in a 40-350 kHz frequency range are detailed. The conditions of choice of fundamental parameters (frequency, line geometry, sample size) are discussed in relation with the nature and the microstructure of the materials under test. This technique can be used to study the variations of elastic moduli of materials at high temperature.

Style APA, Harvard, Vancouver, ISO itp.

40

Yao, Yu, Jin Zhou, Zhengqi Liu, Xiaoshan Liu, Guolan Fu i Guiqiang Liu. "Refractory materials and plasmonics based perfect absorbers". Nanotechnology 32, nr 13 (6.01.2021): 132002. http://dx.doi.org/10.1088/1361-6528/abd275.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Rieth, Michael, i Andreas Hoffmann. "Impact Bending Tests on Selected Refractory Materials". Advanced Materials Research 59 (grudzień 2008): 101–4. http://dx.doi.org/10.4028/www.scientific.net/amr.59.101.

Pełny tekst źródła

Streszczenie:

The possible use of tungsten alloys as structural materials in future fusion reactor divertors strongly depend on their ductile-to-brittle transition temperature (DBTT). The present paper gives an overview on different rod and plate materials fabricated by PLANSEE. It is demonstrated that DBTT is clearly improved compared to commercially available standard materials. Moreover, the significant impact of the microstructure on fracture mode and on toughness is discussed in detail.

Style APA, Harvard, Vancouver, ISO itp.

42

Skurikhin, V. V. "New Refractory Materials and Products for Metallurgy". Metallurgist 48, nr 5/6 (maj 2004): 281–85. http://dx.doi.org/10.1023/b:mell.0000042829.08401.14.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Herique, A., J. Gilchrist, W. Kofman i J. Klinger. "Dielectric properties of comet analog refractory materials". Planetary and Space Science 50, nr 9 (sierpień 2002): 857–63. http://dx.doi.org/10.1016/s0032-0633(02)00060-0.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Brookes, Kenneth JA. "Focus on hard and refractory materials advances". Metal Powder Report 56, nr 9 (wrzesień 2001): 14–19. http://dx.doi.org/10.1016/s0026-0657(01)80512-9.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Bernard, Claude, i R. Madar. "Thermodynamic analysis and deposition of refractory materials". Surface and Coatings Technology 49, nr 1-3 (grudzień 1991): 208–14. http://dx.doi.org/10.1016/0257-8972(91)90057-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Khlebnikov, O. E., A. A. Khalatov, V. V. Lashneva i V. N. Pavlikov. "Spectral thermal radiation characteristics of refractory materials". Refractories 28, nr 7-8 (lipiec 1987): 402–4. http://dx.doi.org/10.1007/bf01400032.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Subramanian, P. R., i J. A. Shields. "Refractory metals and materials: Joining and applications". JOM 48, nr 1 (styczeń 1996): 32. http://dx.doi.org/10.1007/bf03221359.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Sharma, S. C., i Shri Gopal. "Newer Refractory Materials for Cement Rotary Kiln". Transactions of the Indian Ceramic Society 53, nr 5 (styczeń 1994): 116–29. http://dx.doi.org/10.1080/0371750x.1994.10804654.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Mohanty, Pravansu S. "Challenges in thermal spraying of refractory materials". Surface Engineering 21, nr 1 (luty 2005): 1–4. http://dx.doi.org/10.1179/174329405x36691.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

50

Vlček, J., H. Ovčačíková, M. Velička, M. Klárová, J. Burda, M. Topinková, P. Kovář i K. Lang. "Refractory Materials for Thermal Processing of Biomass". Interceram - International Ceramic Review 68, nr 5 (lipiec 2019): 28–33. http://dx.doi.org/10.1007/s42411-019-0033-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!