Gotowe bibliografie tematyczne / Re-assembly

Gotowa bibliografia na temat „Re-assembly”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 20 lutego 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Spis treści

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Re-assembly”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Re-assembly"

1

White, Lydia. "Some questions about feature re-assembly". Second Language Research 25, nr 2 (kwiecień 2009): 343–48. http://dx.doi.org/10.1177/0267658308100294.

Pełny tekst źródła
Streszczenie:
In this commentary, differences between feature re-assembly and feature selection are discussed. Lardiere's proposals are compared to existing approaches to grammatical features in second language (L2) acquisition. Questions are raised about the predictive power of the feature re-assembly approach.
Style APA, Harvard, Vancouver, ISO itp.
2

Moriyama, Rui, Naohiko Shimada, Arihiro Kano i Atsushi Maruyama. "DNA assembly and re-assembly activated by cationic comb-type copolymer". Biomaterials 32, nr 9 (marzec 2011): 2351–58. http://dx.doi.org/10.1016/j.biomaterials.2010.11.064.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Sleight, Sean C., Bryan A. Bartley, Jane A. Lieviant i Herbert M. Sauro. "In-Fusion BioBrick assembly and re-engineering". Nucleic Acids Research 38, nr 8 (10.04.2010): 2624–36. http://dx.doi.org/10.1093/nar/gkq179.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Nguyen, Minh-Nhat, i Ngoc-Hien Do. "Re-engineering Assembly Line with Lean Techniques". Procedia CIRP 40 (2016): 590–95. http://dx.doi.org/10.1016/j.procir.2016.01.139.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Tzeng, Biing-Chiau, An Chao i Manas Banik. "Ligand-coupling assembly of Re(i)-thiolate complexes". Dalton Trans. 43, nr 30 (2014): 11510–15. http://dx.doi.org/10.1039/c4dt00791c.

Pełny tekst źródła
Streszczenie:
Complexes 2 and 4 were synthesized under similar reaction conditions except that different ligands of HNS2 and HNOS, respectively, were used. Two dinuclear structures of 2 and 4 with two similar in situ ligand analogues show distinct conformations, anti and syn forms, respectively.
Style APA, Harvard, Vancouver, ISO itp.
6

Jauhar, Tahir, Soonhung Han i Soonjo Kwon. "Assembly Solving for Neutral Re-Imported Product Models". Computer-Aided Design and Applications 17, nr 1 (23.05.2019): 108–23. http://dx.doi.org/10.14733/cadaps.2020.108-123.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Spracklen, Andrew J., i Mark Peifer. "Actin and Apical Constriction: Some (Re)-Assembly Required". Developmental Cell 35, nr 6 (grudzień 2015): 662–64. http://dx.doi.org/10.1016/j.devcel.2015.12.006.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ratchev, Svetan M., Hitendra Hirani i Maurice Bonney. "Knowledge based formation of re-configurable assembly cells". Journal of Intelligent Manufacturing 18, nr 3 (3.07.2007): 401–9. http://dx.doi.org/10.1007/s10845-007-0031-y.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Dudowicz, Jacek, Jack F. Douglas i Karl F. Freed. "Equilibrium polymerization models of re-entrant self-assembly". Journal of Chemical Physics 130, nr 16 (28.04.2009): 164905. http://dx.doi.org/10.1063/1.3118671.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Spa, Silvia J., Anton Bunschoten, Marcus T. M. Rood, Ruud J. B. Peters, Abraham J. Koster i Fijs W. B. van Leeuwen. "Orthogonal Functionalization of Ferritin via Supramolecular Re-Assembly". European Journal of Inorganic Chemistry 2015, nr 27 (24.07.2015): 4603–10. http://dx.doi.org/10.1002/ejic.201500386.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Re-assembly"

1

Jonsson, Anders. "Laboratory tests and re-assembly of the PoGO Lite detector array". Thesis, KTH, Fysik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-103237.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Svejcar, Lauren Nicole. "How do species interactions drive community re-assembly of banksia woodlands?" Thesis, Svejcar, Lauren Nicole (2020) How do species interactions drive community re-assembly of banksia woodlands? PhD thesis, Murdoch University, 2020. https://researchrepository.murdoch.edu.au/id/eprint/56229/.

Pełny tekst źródła
Streszczenie:
Degraded land is a major issue globally and impacts human societies on every inhabited continent. To counter the negative effects of land degradation and return ecosystems to reference ecological states, active restoration is often required. However, many restoration efforts suffer from low success in the re-assembly of reference states. As such, there is a need for improvements on current restoration practices. Ecological theory suggests that early plant colonisers could help later arrivals in re-assembly. This theory has the potential to inform restoration efforts. The major goal of my research is to build on current theoretical understanding of plant-plant interactions while at the same time improving restoration practice for banksia woodlands. My study system offers a great test of my ideas because it is highly biodiverse. A greater understanding of plant-plant interactions in space, and interactions between diverse functional groups, will inform the types of species to include in seed mixes and could potentially improve likelihoods of restoration success in other woody ecosystems around the world. Specifically, I used observational and manipulative experiments to test spatial arrangements of plant species and build on theories of plant-plant interactions in early and mid-successional stages of restoration. I tracked re-assembly of banksia woodland after sand mining on the Swan Coastal Plain. I utilized spatial point pattern analysis in two studies to analyse spatial associations of perennial plant species and infer interactions from spatial arrangement. Utilizing knowledge gained from the first two studies, I manipulated the spatial arrangement of seeds to test differences in seedling survival. Finally, I tested different densities of a fire-ephemeral species that could impact survival of seedlings in restoration. Results of my studies demonstrate that plant-plant interactions play a critical role in the survival of some species and spatial arrangement effects restoration outcomes. I found some species have a greater tendency to demonstrate positive interactions, but the strength of positive and negative interactions changes through time and by species. Similarly, density dependent mortality was strong for some species but not others. The spatial arrangement of species was also important to seedling survival. Four of six species had greater survival in concentrated seeding-bare space configurations than completely random dispersed plantings, which are representative of current restoration practices. Few studies of positive plant-plant interactions exist for Australia and my studies demonstrate that both positive and negative interactions drive re-assembly patterns in restoration. A greater understanding of plant-plant interactions in space, and interactions between diverse functional groups, will inform the types of species to include in seed mixes and seeding spatial arrangements. Utilizing spatially-informed restoration practices could improve likelihoods of restoration success in other woody ecosystems around the world.
Style APA, Harvard, Vancouver, ISO itp.
3

Ozugurel, Emre, i Abhiram Reddam. "Strategies for assembly line re-balancing with focus on level of automation". Thesis, KTH, Industriell produktion, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-41316.

Pełny tekst źródła
Streszczenie:
Production companies often encounter changes that have to be met because of changing market tastes. This requires them to be flexible in their production process. In order to achieve this flexibility the efficiency of the production line is sometimes compromised. Efficiency of the production line and its flexibility has to go hand in hand if the company is to compete successfully in this dynamic market. Line balancing is an important feature in ensuring that a production line is efficient and producing at its optimum. The process of Line balancing attempts to equalize the load on each workstation of the production line.This thesis wishes to address the requirements of three organizations, KTH, SWEREA and Electrolux.We are required to submit a Master‟s thesis in order to be eligible to receive a Masters degree from the Department of Production Engineering and Management at KTH.Swedish research group SWEREA has been involved in a project titled COMPLEX in collaboration with academic and industrial organizations, which aims to define the „complexity „of a production system and help manage it. This project was founded by VINNOVA.Electrolux is a stakeholder in the COMPLEX project and has hence provided us with this opportunity of doing our Master‟s thesis at their plant. The Electrolux factory at Mariestad has undergone significant renovation. This has been done in order to reach higher levels of flexibility and efficiency in order to deal with constantly changing markets. To help rebalance their new production line by focusing on the Level of Automation at inefficient workstations is a priority along with supporting them during this phase of reconstruction.We will work on satisfying all three organizations simultaneously. On completion of this thesis, we wish to have contributed towards rebalancing the new assembly line with special focus on Level of Automation at the Electrolux factory in Mariestad along with supporting them during this phase of reconstruction. We also hope to contribute significantly in developing the definition of complexity and possible ways to deal with it.
Style APA, Harvard, Vancouver, ISO itp.
4

Avdan, Tayfun. "Circular Product Design : Developing (dis/re)assembly oriented methodology towards product end-of-life". Thesis, Linnéuniversitetet, Institutionen för skog och träteknik (SOT), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-54113.

Pełny tekst źródła
Streszczenie:
This thesis aims at developing a (dis/re)assembly oriented methodology towards product end-of-life. Particular focus in this thesis is on the circularity of furniture via design for (dis/re)assembly. The main motivation behind this study was the need for a method to evaluate the (dis/re)assembly options of furniture designs to be able to facilitate repair, reuse, remanufacturing, refurbishing, or recycling. The study draws upon relevant theories and prior research on Circular product Design, Design for EoL, Design for Environment, and Design for (Dis)assembly of vehicles, electrical and elocronic equipments, whitegoods, as well as office furniture, though relatively limited. The proposed methodology determines major aspects of design for (dis/re)assembly to be taken in to consideration in the early stages of product development. It further provides a set of parameters that are relevant to cabinet type and upholstery furniture group. The study involves a variety of qualitative research methods that are embedded in an interactive research conduct with the engagement of different stakeholders that are charged with the task of product development at Ikea of Sweden (IoS), the collaborator of this study.  The proposed methodology is implemented on three selected furniture designs in a pilot study. The results of the study, above all, suggest that (dis/re)assemblability of a product is a strategic choice that needs to be made at early phases of product development, namely the design phase. Two particular features of the furniture groups, upon which this study focuses, emerges as factors having negative impact on the disassemblability of products: first, wooden frame sofas with respect to their complex structure and connectivity of componants and, second, permanent joints with respect to their destructive impact on the product. The study concludes that it is feasible to develop and implement a potentially comprehensible method to evaluate the ease of disassembly of furniture products and to design for disassembly. The proposed methodology in this study is a contribution to support product design for disassembly towards product circularity.
Style APA, Harvard, Vancouver, ISO itp.
5

Gold, Malcolm. "Proselytism, retention and re-affiliation : the hybridisation of an Assembly of God Church". Thesis, University of Warwick, 2000. http://wrap.warwick.ac.uk/55811/.

Pełny tekst źródła
Streszczenie:
This study provides a qualitative analysis of an Assembly of God Pentecostal church in the North East of England. The research employed an ethnographic framework incorporating overt participant observation and in-depth interviews over the period of one year at the City Christian Centre. In addition, a number of other churches (of varying denominations) were visited and observed. In this work, former interpretations within the sociology of religion, regarding membership and recruitment, are challenged and new perspectives offered. Few ethnographic studies of conservative evangelical Christians in the United Kingdom exist and quantitative work on this group, generally, has failed to define significant concepts such as salvation and conversion adequately. While such concepts remain foundational to the conservative evangelical believer, a significant transformation of religious expression is taking place within contemporary British Pentecostalism. This thesis gives an account of a synthesis between classical Pentecostals and the Charismatic movement that is creating a distinct form of spiritual expression resulting in a hybrid church. This fusion of traditions affects congregations in a number of important areas. Expressions of praise and worship, theological interpretations and church leadership each reflect the dynamics of the hybrid church. So in addition, does a shift in class composition. Once the preserve of the working classes, Pentecostalism in Britain is now much more socially and economically diverse in its membership. This thesis comes at an interesting time for the sociology of religion. Much is said about a resurgence of interest in religion, this is partly due to its persistence in society. Much work has focused on church demographics and secularisation, this work, however, shifts the emphasis away from religious decline to religious adaptation and change.
Style APA, Harvard, Vancouver, ISO itp.
6

Blanchard, Jesse Ryan. "A Confluence of Invasion, Behavioral, and Theoretical Ecology: What Drives Ephemeral Metacommunity Re-assembly?" FIU Digital Commons, 2018. https://digitalcommons.fiu.edu/etd/3651.

Pełny tekst źródła
Streszczenie:
Metacommunity theory has been particularly useful in understanding the way spatially structured communities assemble. Both niche and neutral processes are known to influence metacommunity assembly, and the relative influence of each depends on the level of dispersal-limitation. Contemporary trait-based analyses of metacommunity assembly have enhanced our understanding of these processes. Of the traits investigated, individual personalities have received the least attention, but have been suggested to be drivers of metacommunity assembly model parameters, such as dispersal tendencies and patch density. I address this topic from three angles, three chapters, in this dissertation. First, I used a three-year field survey of fish metacommunity assembly in Everglades National Park to investigate the influence of dispersal-limitation on trait-based metacommunity assembly, asking which traits were important under different levels of dispersal-limitation. I found that the relative influence of traits and local environmental factors decreased, and the influence of regional factors increased with increasing dispersal-limitation. The Rocky Glades has recently been invaded by a micropiscivore with many novel traits, the African Jewelfish. In the second chapter I used my field data to ask what influence this invader has on metacommunity assembly. Overall, African Jewelfish abundance was the third most influential factor in driving assembly. I also used data, which were previously collected by collaborators, from three years prior and two years following the invasion to observe shifts in assembly rules. Assembly became significantly more aggregative immediately following the invasion, a condition which persisted more than a decade later. All previous studies asking the same question, found the same result: invasive introductions correspond with increased species aggregation. This may be a consistent, taxa-independent signal of truly invasive species that can be detected early in the invasion process, making it a potentially useful management tool after further empirical review. In the final chapter, I investigate the potential influence of individual personalities on a metapopulation’s structure. To do this, I used a behavioral individual-based model to explore the influence of sociability, an individual’s propensity to associate with conspecifics, on metapopulation structure at ecologically relevant spatiotemporal scales. I found that individual sociability can significant influence key metapopulation parameters such as dispersal distance and patch density but may not influence landscape occupation. Chapter three concludes with new hypothesis to be evaluated by future field studies. Overall, this dissertation demonstrates the relative roles of invasions, species traits, and individual personalities on metacommunity assembly processes.
Style APA, Harvard, Vancouver, ISO itp.
7

Buzzard, Vanessa, Catherine M. Hulshof, Trevor Birt, Cyrille Violle i Brian J. Enquist. "Re-growing a tropical dry forest: functional plant trait composition and community assembly during succession". WILEY-BLACKWELL, 2016. http://hdl.handle.net/10150/621413.

Pełny tekst źródła
Streszczenie:
1. A longstanding goal of ecology and conservation biology is to understand the environmental and biological controls of forest succession. However, the patterns and mechanisms that guide successional trajectories, especially within tropical forests, remain unclear. 2. We collected leaf functional trait and abiotic data across a 110-year chronosequence within a tropical dry forest in Costa Rica. Focusing on six key leaf functional traits related to resource acquisition and competition, along with measures of forest stand structure, we propose a mechanistic framework to link species composition, community trait distributions and forest structure. We quantified the community-weighted trait distributions for specific leaf area, leaf dry matter concentration, leaf phosphorus concentration, leaf carbon to nitrogen ratio and leaf stable isotopic carbon and nitrogen. We assessed several prominent hypotheses for how these functional measures shift in response to changing environmental variables (soil water content, bulk density and pH) across the chronosequence. 3. Increasingly, older forests differed significantly from younger forests in species composition, above-ground biomass and shifted trait distributions. Early stages of succession were uniformly characterized by lower values of community-weighted mean specific leaf area, leaf stable nitrogen isotope and leaf phosphorus concentration. Leaf dry matter concentration and leaf carbon to nitrogen ratio were lower during earlier stages of succession, and each trait reached an optimum during intermediate stages of succession. The leaf carbon isotope ratio was the only trait to decrease linearly with increasing stand age indicating reduced water use efficiency in older forests. However, in contrast with expectations, community-weighted trait variances did not generally change through succession, and when compared to null expectations were lower than expected. 4. The observed directional shift in community-weighted mean trait values is consistent with the 'productivity filtering' hypothesis where a directional shift in water and light availability shifts physiological strategies from 'slow' to 'fast'. In contrast with expectations arising from niche based ecology, none of the community trait distributions were over-dispersed. Instead, patterns of trait dispersion are consistent with the abiotic filtering and/or competitive hierarchy hypotheses.
Style APA, Harvard, Vancouver, ISO itp.
8

Tudor, Emily Paige. "The Patterns and Processes of Insect Pollinator Re-assembly across a Post-mining Restoration Landscape". Thesis, Curtin University, 2021. http://hdl.handle.net/20.500.11937/83667.

Pełny tekst źródła
Streszczenie:
This thesis presents an integration of in situ field studies and ex situ laboratory experiments to provide a deeper insight into the patterns and processes underpinning the reassembly of insect pollinator communities in post-mining Jarrah Forest restoration. Overall, this research highlighted the value of early successional patches and suggests that the habitat selection of some endemic insect pollinators is driven largely by their thermal tolerance, energetic requirements, and ecophysiology.
Style APA, Harvard, Vancouver, ISO itp.
9

McElgunn, Hannah. "The discursive (re)production and transformation of social life at the occupy wall street general assembly". Thesis, McGill University, 2012. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=107912.

Pełny tekst źródła
Streszczenie:
This study focuses on a consensus-based deliberative practice, known as the New York City General Assembly (NYCGA). This practice, built on the values of inclusivity and equality of voice, is a key component of the Occupy Wall Street (OWS) protest. While political commentators have criticized the protest's lack of a singular demand, such a critique ignores the matrix of values and interactional norms that underlie communicative events occurring at the OWS camp, particularly the NYCGA. Consequently, this critique risks overlooking the ways in which the NYCGA produces, reinforces, and potentially transforms social relationships and sociocultural subjects, both within the real-time of the assembly and beyond. To investigate these processes of (re)production and transformation of social life, I conduct a linguistic analysis of two different aspects of the NYCGA. Firstly, I analyze the textual archive of the NYCGA that comprises (1) written documents passed through the consensus process, and (2) how-to guides and minutes produced about the consensus process. Secondly, I analyze performances of this discursive practice reconstructed through minutes and video footage. I suggest the NYCGA is a pedagogic ritual that equips participants to disrupt, or more ideally transform, ongoing discursive interactions by recontextualizing them and thus shifting their norms and attendant values.
Cette étude porte sur l'Assemblée Générale de la Ville de New York (AGNY), une pratique délibérative basée sur le consensus. Cette pratique, qui épouse les valeurs d'inclusion et d'égalité, est au coeur des manifestations des indignés de « Occupy Wall Street ». La critique de cette pratique générée par des commentateurs politiques et selon laquelle celle-ci ne fabriquerait pas de demande singulière néglige cependant la matrice de valeurs et de normes sociales qui sous-tend tout événement communicatif, tels que l'AGNY. Par conséquent, le risque de cette critique est qu'elle ignore les façons dont l'AGNY construit, soutient et potentiellement transforme les relations sociales ainsi que leurs sujets socioculturels, et ce non seulement pendant, mais également au-delà des assemblées. Afin d'explorer ces processus de (re)production et de transformation de la vie sociale, cette étude propose une analyse linguistique de l'AGNY en deux parties : dans un premier temps, un examen des archives textuelles de l'AGNY (composées des documents écrits retenus par l'assemblée par voie de consensus, et des guides pratiques et des compte-rendus qui décrivent ces assemblées) et dans un deuxième temps, une analyse du déroulement de l'AGNY au travers de ses comptes-rendus et de ses enregistrements vidéo. Ces analyses démontrent que l'AGNY est un rituel pédagogique qui apprend à ces participants à intervenir (par voies d'interruptions ou plus idéalement, de transformations) au cours de discours interactifs, modifiant, par un processus de recontextualisation, les normes et les valeurs de ces discours.
Style APA, Harvard, Vancouver, ISO itp.
10

Harpster, Matthew Benjamin. "A re-assembly and reconstruction of the 9th-century AD vessel wrecked off the coast of Bozburun, Turkey". Diss., Texas A&M University, 2005. http://hdl.handle.net/1969.1/2695.

Pełny tekst źródła
Streszczenie:
In 1973, researchers from the Institute of Nautical Archaeology (INA) were led to the site of a wrecked ship by sponge diver Mehmet A??k??n, near his hometown of Bozburun, Turkey. During further monitoring over the following 21 years by INA, the site was identified as a merchant vessel dating from the 9th century AD. The excavation of the site by INA researchers and students from Texas A&M University occurred over four summer seasons, from 1995 to 1998, and yielded approximately 900 whole or nearly-whole amphorae, personal items, palynological material, and approximately 35 percent of the vessel??s wooden hull. This dissertation is a record of the curation, cataloging, analysis and re-assembly of the preserved elements of the Bozburun vessel??s hull, as well as a theoretical reconstruction of the entire vessel. The Bozburun vessel is unique as it is the only fully-excavated shipwreck from the 9th century AD, and is, indeed, a valuable source of examples of ship construction in the Mediterranean between the 7th and the 11th centuries AD. This dissertation, after discussing the methods of excavation and cataloging methods, posits the hypothesis that the techniques used to build this vessel represent a transitional stage in shipbuilding technology, combining distinctly old and new techniques. While the builders used embedded edge joinery in the ship??s planking, a very old method, they also appear to have used a conceptual framework and standards to design the vessel as well; methods evident in modified forms in Italian shipbuilding treatises from the Renaissance.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Re-assembly"

1

Re-assembly required: Critical autoethnography and spiritual discovery. New York: Peter Lang, 2017.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Robert, Campbell. Memorandum re Queen's University, to the members of the General Assembly Commission. [Montréal?: s.n., 1996.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Cooling, Margaret. Faith in history: Ideas for RE, history and assembly in the primary school. Guildford: Eagle, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Gold, Malcolm. The hydridization of an Assembly of God church: Proselytism, retention, and re-affiliation. Lewiston, N.Y: Edwin Mellen Press, 2003.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

David, Shepherd. Some assembly required: Behind the scenes at the re-birth of the Scottish Parliament. Edinburgh: Luath, 2000.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

(Organization), Missouri Businesses United. Financial contributions to all candidates elected or re-elected to Missouri General Assembly in 1998. St. Louis, Mo.]: Missouri Businesses United, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Public Service Commission of Maryland. Final report of the Public Service Commission of Maryland to the Maryland General Assembly: Options for re-regulation and new generation. [Baltimore, Md.]: Maryland Public Service Commission, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Public Service Commission of Maryland. Final report of the Public Service Commission of Maryland to the Maryland General Assembly: Options for re-regulation and new generation. [Baltimore, Md.]: Maryland Public Service Commission, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Public Service Commission of Maryland. Final report of the Public Service Commission of Maryland to the Maryland General Assembly: Options for re-regulation and new generation. [Baltimore, Md.]: Maryland Public Service Commission, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

California. Legislature. Assembly. Committee on Human Services. Joint hearing in re the homeless, before the Assembly Human Services and Senate Health and Human Services Committees, State Capitol, Room 126, Sacramento, California ... Sacramento, Calif: Peters Shorthand Reporting Corp., 1985.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Re-assembly"

1

Nuttin, M., i H. Van Brussel. "Learning and Re-Calibration in Flexible Assembly". W Making Robots Smarter, 53–64. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4615-5239-0_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Molfino, R. M., A. Lacchini, G. Maggiolo, R. C. Michelini i R. P. Razzoli. "Re-engineering: leanness issues in automatic assembly". W Globalization of Manufacturing in the Digital Communications Era of the 21st Century, 603–15. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-0-387-35351-7_48.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Kattan, M. R. "Minimizing the cost of re-work in assembly". W Total Quality Management, 347–51. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0539-2_57.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Makssoud, Fatme, Olga Battaïa i Alexandre Dolgui. "An Exact Method for the Assembly Line Re-balancing Problem". W IFIP Advances in Information and Communication Technology, 159–66. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-41266-0_20.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Leymena, Leonard, Cucuk Nur Rosyidi i Wakhid Ahmad Jauhari. "Re-designing an Assembly Lines at an Automotive Manufacturing Company". W Lecture Notes in Mechanical Engineering, 298–304. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0950-6_46.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Goss, W. M., Claire Hooker i Ronald D. Ekers. "The Royal Society: Europe and North America, 1954". W Historical & Cultural Astronomy, 361–79. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-07916-0_24.

Pełny tekst źródła
Streszczenie:
AbstractIn the year 1954 Pawsey was elected as a Fellow of the Royal Society and we provide some details on the nomination process that led to his election. Later that year Pawsey travelled to Europe and North America, leading the Australian delegation to the URSI General assembly in The Hague and re-establishing his International contacts.
Style APA, Harvard, Vancouver, ISO itp.
7

Dixon, Tom. "Re-Examination of Soldering Techniques". W The Electronics Assembly Handbook, 263–72. Berlin, Heidelberg: Springer Berlin Heidelberg, 1988. http://dx.doi.org/10.1007/978-3-662-13161-9_46.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ewert, Daniel, Sebastian Thelen, Ralph Kunze, Marcel Mayer, Daniel Schilberg i Sabina Jeschke. "A Graph Based Hybrid Approach of Offline Pre-planning and Online Re-planning for Efficient Assembly under Realtime Constraints". W Automation, Communication and Cybernetics in Science and Engineering 2011/2012, 623–35. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33389-7_49.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Ewert, Daniel, Sebastian Thelen, Ralph Kunze, Marcel Mayer, Daniel Schilberg i Sabina Jeschke. "A Graph Based Hybrid Approach of Offline Pre-planning and Online Re-planning for Efficient Assembly under Realtime Constraints". W Intelligent Robotics and Applications, 44–55. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-16587-0_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Clerc, Louis. "Participating in Multilateral Cultural Cooperation". W Palgrave Macmillan Series in Global Public Diplomacy, 199–232. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-12205-7_5.

Pełny tekst źródła
Streszczenie:
AbstractFinland signed the UNESCO charter on 10 October 1956. Jaakko Numminen starts the part of his memoirs dedicated to international cultural relations by insisting on the importance of UNESCO and multilateral organizations for the Ministry of Education’s work after the late 1950s. September delegation work in Paris during the organization’s assembly was an important event for the Ministry’s civil servants involved in international relations, a moment of reflection with the Ministry for Foreign Affairs about Finland’s position in international cultural cooperation with Nordic committees on positions, programmes, declarations and so on. It was both a proud moment, when Finnish representatives could feel concretely their country’s re-integration in international circles, and a difficult moment, when the Finns could vituperate about UNESCO’s bureaucracy and disorganization. UNESCO was only one example of the multiple forms of multilateral cooperations Finland got involved with in the postwar years, from Nordic cooperation to the OECD. If UNESCO created a bureaucracy of cultural diplomacy often disconnected from the realities of Finnish culture, other forms were more pragmatic and in sync with Finland’s educational and cultural developments.
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Re-assembly"

1

Wirabhuana, Arya, Habibollah Haron i Muhammad Rofi Imtihan. "Simulation and Re-Engineering of Truck Assembly Line". W 2008 Second Asia International Conference on Modelling & Simulation (AMS). IEEE, 2008. http://dx.doi.org/10.1109/ams.2008.82.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Nisser, Martin, Yashaswini Makaram, Faraz Faruqi, Ryo Suzuki i Stefanie Mueller. "Selective Self-Assembly using Re-Programmable Magnetic Pixels". W 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, 2022. http://dx.doi.org/10.1109/iros47612.2022.9981879.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Reinhard, David, Jean Vergnolle, David Reinhard i Jean Vergnolle. "Atmospheric Re-entry Demonstrator (ARD) - Its parachute recovery assembly". W 14th Aerodynamic Decelerator Systems Technology Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1997. http://dx.doi.org/10.2514/6.1997-1438.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Bo-Heung Chung, Jae-Deok Lim, Seung-Ho Ryu, Young-Ho Kim i Ki-Young Kim. "Fragment packet partial re-assembly method for intrusion detection". W 8th International Conference on Advanced Communication Technology. IEEE, 2006. http://dx.doi.org/10.1109/icact.2006.205933.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Jauhar, Tahir Abbas, Soonhung Han i Soonjo Kwon. "Integration of Neutral/Re-Imported Models for Assembly Update". W CAD'19. CAD Solutions LLC, 2019. http://dx.doi.org/10.14733/cadconfp.2019.13-17.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

McDermott, Scott D., i Bert Bras. "Development of a Haptically Enabled Dis/Re-Assembly Simulation Environment". W ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/cie-9035.

Pełny tekst źródła
Streszczenie:
Abstract Typical CAD environments constrain the user to one sense, sight, and two dimensions, the table upon which the mouse rests. The introduction of a haptic interface into the CAD environment allows users to incorporate both a third dimension and a second sense, that of touch, into their work. We are currently developing HIDRA (Haptic Integrated Dis/Re-assembly Analysis), an application that integrates haptic feedback into a (dis)assembly simulation environment. In this paper, we present the basic computer architecture of the application, including its interface with commercial CAD systems. We also explain some of application constraints unique to haptic simulation and the methods employed to help meet these constraints. Finally, we identify some available avenues for future work.
Style APA, Harvard, Vancouver, ISO itp.
7

Heger, Frederik W., i Sanjiv Singh. "Robust robotic assembly through contingencies, plan repair and re-planning". W 2010 IEEE International Conference on Robotics and Automation (ICRA 2010). IEEE, 2010. http://dx.doi.org/10.1109/robot.2010.5509274.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Jiang, NanYun, i Hongsen Yan. "Optimal Stochastic Production Scheduling for Uncertain Re-entrant Assembly Workshops". W 4th International Conference on Computer, Mechatronics, Control and Electronic Engineering. Paris, France: Atlantis Press, 2015. http://dx.doi.org/10.2991/iccmcee-15.2015.82.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Marehalli, Jayavardhan N., i Robert H. Sturges. "Practical Passive Assembly: Gripper Design and Assembly Sequence Optimization". W ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dfm-8946.

Pełny tekst źródła
Streszczenie:
Abstract For efficient assembly without feedback systems (or, passive assembly), the assembler should know the ideal orientation of each component and the assembly sequence. A heuristic presented here finds an optimal assembly sequence and prescribes the orientation of the components for a minimum set of grippers — ideally one. The heuristic utilizes an index of difficulty (ID) that quantifies assembly. The ID for each task in the assembly process is computed based on a number of geometrical and operational properties. The objective of the optimization problem here is to minimize the assembly ID and categorize parts/subassemblies based on their preferred direction of assembly while allowing re-orientation of the base part. It is assumed that the preferred direction of assembly is vertically downwards consistent with manual as well as most automatic assembly protocols. Our attempt is to minimize the number of degrees of freedom required in a re-orienting fixture and mathematically derive the requirements for such a fixture. The assembly of a small engine is used as an example in this study due to the variety of ideally rigid parts involved.
Style APA, Harvard, Vancouver, ISO itp.
10

Chu, Henry K., James K. Mills i William L. Cleghorn. "Automatic Micropart Re-Orientation Through Visual Tracking for Automated Micro-Assembly". W ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-38999.

Pełny tekst źródła
Streszczenie:
The process of microassembly often involves the manipulation and grasping of complex micro-sized objects. These micro-objects are generally initially placed at random orientations in the plane when transferred to an assembly workstation. The part orientations must be corrected in order for the gripper to grasp them. Visual monitoring feedback is commonly used to assist in the re-orientation and manipulation process. However, due to the very limited field of view of imaging systems used in micro-assembly, the target micro-object may not remain within the viewable area during the reorientation processes. This paper presents an integrated controller algorithm to automatically rotate micro-objects to the desired orientation in the plane for grasping. This novel algorithm incorporates the technique of dynamic tracking to prevent the target micro-object from shifting outside of the viewable area during the re-orientation process. As the micro-object is rotated to correct its orientation, the algorithm will evaluate the required translational inputs in order to maintain the micro-object within the field of view. To minimize the delay due to feedback control, the proposed algorithm employs the principle of Kaiman filter estimation to track and project the motion at the next sampling interval. The proposed algorithm was evaluated experimentally with a microassembly operation using an in-house micro-manipulator. Results from the experiments showed that the proposed tracking algorithm was capable of tracking and maintaining the targeted micropart at the specified location with an error of within +/−15 pixels.
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Re-assembly"

1

Zahuranec, Andrew J. Zahuranec, Andrew Young Young, Nadiya Safonova Safonova i Stefaan G. Verhulst Verhulst. The Data Assembly: The Responsible Data Re-Use Framework. GovLab, listopad 2020. http://dx.doi.org/10.15868/socialsector.40379.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Wyant, F. J., D. Luchau i T. D. McCarson. Re-START: The second operational test of the String Thermionic Assembly Research Testbed. Office of Scientific and Technical Information (OSTI), styczeń 1998. http://dx.doi.org/10.2172/292839.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Valdes, James R., i Heather Furey. WHOI 260Hz Sound Source - Tuning and Assembly. Woods Hole Oceanographic Institution, kwiecień 2021. http://dx.doi.org/10.1575/1912/27173.

Pełny tekst źródła
Streszczenie:
Sound sources are designed to provide subsea tracking and re‐location of RAFOS floats and other Lagrangian drifters listening at 260Hz. More recently sweeps have been added to support FishChip tracking at 262Hz. These sources must be tuned to the water properties where they are to be deployed as they have a fairly narrow bandwidth. The high‐Q resonator’s bandwidth is about 4Hz. This report documents the tuning, and provides an overview of the sound source assembly.
Style APA, Harvard, Vancouver, ISO itp.
4

VerWey, John. Betting the House: Leveraging the CHIPS and Science Act to Increase U.S. Microelectronics Supply Chain Resilience. Center for Security and Emerging Technology, styczeń 2023. http://dx.doi.org/10.51593/20220054.

Pełny tekst źródła
Streszczenie:
The U.S. semiconductor supply chain’s resilience will meaningfully increase only if current efforts to re-shore fabrication (that is, to situate more facilities that make its key parts in the United States) are met with commensurate efforts to re-shore upstream material production along with downstream assembly, test, and packaging (ATP) of finished microelectronics.
Style APA, Harvard, Vancouver, ISO itp.
5

Gur, Amit, Edward Buckler, Joseph Burger, Yaakov Tadmor i Iftach Klapp. Characterization of genetic variation and yield heterosis in Cucumis melo. United States Department of Agriculture, styczeń 2016. http://dx.doi.org/10.32747/2016.7600047.bard.

Pełny tekst źródła
Streszczenie:
Project objectives: 1) Characterization of variation for yield heterosis in melon using Half-Diallele (HDA) design. 2) Development and implementation of image-based yield phenotyping in melon. 3) Characterization of genetic, epigenetic and transcriptional variation across 25 founder lines and selected hybrids. The epigentic part of this objective was modified during the course of the project: instead of characterization of chromatin structure in a single melon line through genome-wide mapping of nucleosomes using MNase-seq approach, we took advantage of rapid advancements in single-molecule sequencing and shifted the focus to Nanoporelong-read sequencing of all 25 founder lines. This analysis provides invaluable information on genome-wide structural variation across our diversity 4) Integrated analyses and development of prediction models Agricultural heterosis relates to hybrids that outperform their inbred parents for yield. First generation (F1) hybrids are produced in many crop species and it is estimated that heterosis increases yield by 15-30% globally. Melon (Cucumismelo) is an economically important species of The Cucurbitaceae family and is among the most important fleshy fruits for fresh consumption Worldwide. The major goal of this project was to explore the patterns and magnitude of yield heterosis in melon and link it to whole genome sequence variation. A core subset of 25 diverse lines was selected from the Newe-Yaar melon diversity panel for whole-genome re-sequencing (WGS) and test-crosses, to produce structured half-diallele design of 300 F1 hybrids (MelHDA25). Yield variation was measured in replicated yield trials at the whole-plant and at the rootstock levels (through a common-scion grafted experiments), across the F1s and parental lines. As part of this project we also developed an algorithmic pipeline for detection and yield estimation of melons from aerial-images, towards future implementation of such high throughput, cost-effective method for remote yield evaluation in open-field melons. We found extensive, highly heritable root-derived yield variation across the diallele population that was characterized by prominent best-parent heterosis (BPH), where hybrids rootstocks outperformed their parents by 38% and 56 % under optimal irrigation and drought- stress, respectively. Through integration of the genotypic data (~4,000,000 SNPs) and yield analyses we show that root-derived hybrids yield is independent of parental genetic distance. However, we mapped novel root-derived yield QTLs through genome-wide association (GWA) analysis and a multi-QTLs model explained more than 45% of the hybrids yield variation, providing a potential route for marker-assisted hybrid rootstock breeding. Four selected hybrid rootstocks are further studied under multiple scion varieties and their validated positive effect on yield performance is now leading to ongoing evaluation of their commercial potential. On the genomic level, this project resulted in 3 layers of data: 1) whole-genome short-read Illumina sequencing (30X) of the 25 founder lines provided us with 25 genome alignments and high-density melon HapMap that is already shown to be an effective resource for QTL annotation and candidate gene analysis in melon. 2) fast advancements in long-read single-molecule sequencing allowed us to shift focus towards this technology and generate ~50X Nanoporesequencing of the 25 founders which in combination with the short-read data now enable de novo assembly of the 25 genomes that will soon lead to construction of the first melon pan-genome. 3) Transcriptomic (3' RNA-Seq) analysis of several selected hybrids and their parents provide preliminary information on differentially expressed genes that can be further used to explain the root-derived yield variation. Taken together, this project expanded our view on yield heterosis in melon with novel specific insights on root-derived yield heterosis. To our knowledge, thus far this is the largest systematic genetic analysis of rootstock effects on yield heterosis in cucurbits or any other crop plant, and our results are now translated into potential breeding applications. The genomic resources that were developed as part of this project are putting melon in the forefront of genomic research and will continue to be useful tool for the cucurbits community in years to come.
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Re-assembly” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii