Rozprawy doktorskie na temat „Pya”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Pya”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.
Busu, Alice. "Development of PVA/PDA nanocomposite membranes for CO2 capture". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Znajdź pełny tekst źródłaGuerrouani, Nadia. "Synthèse de copolymères amphiphiles triblocs PHA-b-PEG-b-PHA et greffés PVA-g-PHA : Modification de surface de films par plasma". Montpellier 2, 2005. http://www.theses.fr/2005MON20198.
Pełny tekst źródłaGérard, Thibaut. "Elaboration et caractérisation de matériaux multiphasiques à base de polylactide (PLA) et de polyhydroxyalcanoates (PHA)". Phd thesis, Ecole Nationale Supérieure des Mines de Paris, 2013. http://pastel.archives-ouvertes.fr/pastel-00874861.
Pełny tekst źródłaLee, Ji Hyun. "Development of a Tool to Assist the Nuclear Power Plant Operator in Declaring a State of Emergency Based on the Use of Dynamic Event Trees and Deep Learning Tools". The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1543069550674204.
Pełny tekst źródłaLimberger, Jaqueline Rocha. "Nanofibras de PVA/PAA com incorporação de hidroxiapatita e sua aplicação em sistemas osteocondutores". reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2015. http://hdl.handle.net/10183/131729.
Pełny tekst źródłaThis study aims to develop a biomaterial composed of poly (vinyl alcohol) (PVA) and poly (acrylic acid) (PAA) containing hydroxyapatite (HA) for application in osteoconductive systems. Polymeric nanofibers were prepared by electrospinning method to mimic bone extracellular matrix (ECM), in addition to obtaining a material with large surface area to volume ratio, which improve the adhesion and proliferation of bone cells. For this purpose we used PVA and PAA matrix by varying the concentration of HA in the matrix. For the hydrophilic characteristics of the PVA, a crosslinking has been required, so BTCA was used and studied by varying its concentration in two different proportions of 2 % and 6 % (w/w). The crosslinking is effective for the PVA/PAA/HA matrix with at least 2 % BTCA, and the FTIR-ATR demonstrated the permanence of the main groups such as hydroxyl and carbonyl and SEM analysis confirmed the stability of nanofibers after 48 hours immersion in water. The medium diameters ranged from 273-437 nm with smaller size and smaller variation of fiber diameters in the array with the presence of HA. The results of the mechanical analysis matrices obtained were very similar to the mechanical properties of bone. The thermal analysis of trials proved one miscible mixture in the PVA/PAA/HA matrix. The cell viability tests showed that the matrix in the presence of HA has higher cellular activity when compared to PVA/PAA matrix, which proves that the HA in the matrix has a fundamental role in cellular activity.
Bhattarai, Rajan Sharma Bhattarai. "Comparison of Electrospun and Solvent Cast PLA/PVA Inserts as Potential Ocular DrugDelivery Vehicles". University of Toledo Health Science Campus / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=mco1469787337.
Pełny tekst źródłaDeng, Yixin. "Optimising properties of poly(lactic acid) blends through co-continuous phase morphology". Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/33338.
Pełny tekst źródłaFerreira, Sabrina [UNESP]. "PLA/PGA copolymer as a bone substitute in maxillary sinus augmentation: histological, histometric and immunohistochemistry study in rabbits". Universidade Estadual Paulista (UNESP), 2014. http://hdl.handle.net/11449/115724.
Pełny tekst źródłaCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
A proposta deste estudo foi avaliar a capacidade osteocondutora da forma sólida do copolímero de PLA/PGA em um modelo experimental de enxerto em seio maxilar . Vinte coelhos machos, branco, da raça Nova Zelândia, cada um pesando cerca de 3,0 kg, foram utilizados e foram divididos em dois grupos de acordo com o material de preenchimento do seio, como segue: ósseo autógeno particulado e copolímero PLA/PGA . A área aumentada diferiu entre os grupos após 3, 7 e 15 dias (p = 0,004) . No entanto, os valores tornaram-se semelhante aos 40 dias (p = 0,458). Depois de 3 e 7 dias, a porcentagem óssea foi estatisticamente significativa entre osso autógeno e PLA / PGA copolímero (P = 0,004 e P = 0,004). Após 15 e 40 dias os valores foram semelhantes nos dois períodos (P = 0,087 e P = 0,087 ). Imunohistoquímica confirma os resultados sobre os dados histomorfométricos. Em conclusão, o copolímero de PLA/PGA parece ser adequado como material reabsorvível capaz de induzir o crescimento do osso em defeitos ósseos. Esta observação sugere que o material tem propriedades osteocondutoras também apropriado para aplicação em cirurgia maxilo-facial
The proposition of this study was evaluate the osteoconductive capability of the solid form of PLA/PGA copolymer in an experimental model of maxillary sinus grafting. Twenty male white New Zealand rabbits, each weighing about 3.0kg, were used and were divided into two groups, according to the sinus filling material, as follows: autogenous bone chips and PLA/PGA copolymers. Augmented area differ between the groups after 3, 7 and 15 days (P=0.004). However, the values became similar on day 40 (P=0.458). After 3 and 7 days the percentage of bone was statistically significant between autogenous bone and PLA/PGA copolymer (P=0.004 and P=0.004). After 15 and 40 days the values were comparable in the two periods (P=0.087 and P=0.087). Immunohistochemistry confirms the results on the histomorphometric data. In conclusion, PLA/PGA copolymer seems to be suitable as resorbable material able to induce bone growth in bone defects. This observation suggests that the material have osteoconductive properties also suitable for application in maxillofacial surgery
Ferreira, Sabrina. "PLA/PGA copolymer as a bone substitute in maxillary sinus augmentation : histological, histometric and immunohistochemistry study in rabbits /". Araçatuba, 2014. http://hdl.handle.net/11449/115724.
Pełny tekst źródłaBanca: Wilson Roberto Poi
Banca: Ronaldo Célio Mariano
A dissertação foi escrita em inglês
Resumo: A proposta deste estudo foi avaliar a capacidade osteocondutora da forma sólida do copolímero de PLA/PGA em um modelo experimental de enxerto em seio maxilar . Vinte coelhos machos, branco, da raça Nova Zelândia, cada um pesando cerca de 3,0 kg, foram utilizados e foram divididos em dois grupos de acordo com o material de preenchimento do seio, como segue: ósseo autógeno particulado e copolímero PLA/PGA . A área aumentada diferiu entre os grupos após 3, 7 e 15 dias (p = 0,004) . No entanto, os valores tornaram-se semelhante aos 40 dias (p = 0,458). Depois de 3 e 7 dias, a porcentagem óssea foi estatisticamente significativa entre osso autógeno e PLA / PGA copolímero (P = 0,004 e P = 0,004). Após 15 e 40 dias os valores foram semelhantes nos dois períodos (P = 0,087 e P = 0,087 ). Imunohistoquímica confirma os resultados sobre os dados histomorfométricos. Em conclusão, o copolímero de PLA/PGA parece ser adequado como material reabsorvível capaz de induzir o crescimento do osso em defeitos ósseos. Esta observação sugere que o material tem propriedades osteocondutoras também apropriado para aplicação em cirurgia maxilo-facial
Abstract: The proposition of this study was evaluate the osteoconductive capability of the solid form of PLA/PGA copolymer in an experimental model of maxillary sinus grafting. Twenty male white New Zealand rabbits, each weighing about 3.0kg, were used and were divided into two groups, according to the sinus filling material, as follows: autogenous bone chips and PLA/PGA copolymers. Augmented area differ between the groups after 3, 7 and 15 days (P=0.004). However, the values became similar on day 40 (P=0.458). After 3 and 7 days the percentage of bone was statistically significant between autogenous bone and PLA/PGA copolymer (P=0.004 and P=0.004). After 15 and 40 days the values were comparable in the two periods (P=0.087 and P=0.087). Immunohistochemistry confirms the results on the histomorphometric data. In conclusion, PLA/PGA copolymer seems to be suitable as resorbable material able to induce bone growth in bone defects. This observation suggests that the material have osteoconductive properties also suitable for application in maxillofacial surgery
Mestre
Colete, Juliana Zorzi [UNESP]. "Uso do copolímero de PLA/PGA no processo de reparo de defeitos ósseos em tíbia de coelhos: análise histomorfométrica". Universidade Estadual Paulista (UNESP), 2014. http://hdl.handle.net/11449/115725.
Pełny tekst źródłaObjetivo: Analisar a influência do copolímero de ácido polilático e poliglicólico (PLA/PGA) associado ou não ao osso autógeno no processo de reparo ósseo, em defeitos críticos criados em tíbia de coelhos, por meio da análise histomorfométrica. Material e Método: Doze coelhos receberam 2 ostectomias em cada tíbia por meio de trefina de 6.1 mm de diâmetro. Os defeitos ósseos críticos foram preenchidos de acordo com os seguintes grupos: coágulo sanguíneo (GC), osso autógeno (GA), PLA/PGA (GP) e PLA/PGA associado ao osso autógeno (GPA). Seis animais por período foram submetidos à eutanásia aos 7 e 30 dias pós-operatórios, para a análise histomorfométrica. Resultados: Aos 7 dias, na comparação entre GC(48,33%), GA(25,67%), GP(4,17%) e GPA(21,5%), notou-se diferença estatisticamente significante (Kruskal-Wallis, p=0,0163), evidenciada na comparação entre os GC e GP (Teste de Dunn, p<0,05). Aos 30 dias, a comparação entre GC(56,17%), GA(61,50%), GP(67,33%) e GPA(50,50%), não mostrou diferença estatisticamente significante (Kruskal-Wallis, p=0,2026). Conclusão: Foi possível concluir, neste modelo experimental, que o copolímero PLA/PGA é um biomaterial com propriedades osteocondutoras e pode ser utilizado de maneira isolada, sem a presença de osso autógeno associado.
Objective: To analyze the influence of polylactic/polyglycolic acid copolymer (PLA/PGA) associated or not with autogenous bone in the bone repair process in critical size defects of rabbit tibia through histomorphometric analysis. Methods: Twelve rabbits received 2 osteotomies in each tibia through trephine (6.1 mm diameter). The critical bone defects were filled according to the following groups: blood clot (GC), autogenous bone (GA), PLA / PGA (GP) and PLA / PGA associated with autogenous bone (GP). Six animals were euthanized at 7 and 30 days postoperatively. Results: At 7 days, through of groups comparison GC (48.33 %), GA (25.67 %), GP (4.17 %) and GPA (21.5 %) was observed statistically significant difference (Kruskal-Wallis, p= 0.0163), when compared GC and GP groups (Dunn, p < 0.05). At 30 days, the comparison between GC (56.17 %), GA (61.50 %), GP (67.33 %) and GPA (50.50 %) showed no statistically significant difference (Kruskal-Wallis, p = 0.2026). Conclusion: PLA / PGA copolymer is a biomaterial with osteoconductive properties and can be used isolated without autogenous bone supplementation.
Coléte, Juliana Zorzi. "Uso do copolímero de PLA/PGA no processo de reparo de defeitos ósseos em tíbia de coelhos : análise histomorfométrica /". Araçatuba, 2014. http://hdl.handle.net/11449/115725.
Pełny tekst źródłaCoorientador: Roberta Okamoto
Banca: Alessandra Marcondes Aranega
Banca: Pâmela Letícia dos Santos
Resumo: Objetivo: Analisar a influência do copolímero de ácido polilático e poliglicólico (PLA/PGA) associado ou não ao osso autógeno no processo de reparo ósseo, em defeitos críticos criados em tíbia de coelhos, por meio da análise histomorfométrica. Material e Método: Doze coelhos receberam 2 ostectomias em cada tíbia por meio de trefina de 6.1 mm de diâmetro. Os defeitos ósseos críticos foram preenchidos de acordo com os seguintes grupos: coágulo sanguíneo (GC), osso autógeno (GA), PLA/PGA (GP) e PLA/PGA associado ao osso autógeno (GPA). Seis animais por período foram submetidos à eutanásia aos 7 e 30 dias pós-operatórios, para a análise histomorfométrica. Resultados: Aos 7 dias, na comparação entre GC(48,33%), GA(25,67%), GP(4,17%) e GPA(21,5%), notou-se diferença estatisticamente significante (Kruskal-Wallis, p=0,0163), evidenciada na comparação entre os GC e GP (Teste de Dunn, p<0,05). Aos 30 dias, a comparação entre GC(56,17%), GA(61,50%), GP(67,33%) e GPA(50,50%), não mostrou diferença estatisticamente significante (Kruskal-Wallis, p=0,2026). Conclusão: Foi possível concluir, neste modelo experimental, que o copolímero PLA/PGA é um biomaterial com propriedades osteocondutoras e pode ser utilizado de maneira isolada, sem a presença de osso autógeno associado.
Abstract: Objective: To analyze the influence of polylactic/polyglycolic acid copolymer (PLA/PGA) associated or not with autogenous bone in the bone repair process in critical size defects of rabbit tibia through histomorphometric analysis. Methods: Twelve rabbits received 2 osteotomies in each tibia through trephine (6.1 mm diameter). The critical bone defects were filled according to the following groups: blood clot (GC), autogenous bone (GA), PLA / PGA (GP) and PLA / PGA associated with autogenous bone (GP). Six animals were euthanized at 7 and 30 days postoperatively. Results: At 7 days, through of groups comparison GC (48.33 %), GA (25.67 %), GP (4.17 %) and GPA (21.5 %) was observed statistically significant difference (Kruskal-Wallis, p= 0.0163), when compared GC and GP groups (Dunn, p < 0.05). At 30 days, the comparison between GC (56.17 %), GA (61.50 %), GP (67.33 %) and GPA (50.50 %) showed no statistically significant difference (Kruskal-Wallis, p = 0.2026). Conclusion: PLA / PGA copolymer is a biomaterial with osteoconductive properties and can be used isolated without autogenous bone supplementation.
Mestre
Dudko, O. G. "Biomechanical evaluation of mechanical strength of metal and PLA/PGA screws used for internal fixation of long bone fractures". Thesis, БДМУ, 2021. http://dspace.bsmu.edu.ua:8080/xmlui/handle/123456789/18649.
Pełny tekst źródłaBellmann, C., A. Steinke, T. Frank i G. Gerlach. "Humidity micro switch based on humidity-sensitive polymers". SPIE, 2015. https://tud.qucosa.de/id/qucosa%3A35030.
Pełny tekst źródłaRawandi, Omed A. "Evaluation of Epistemic Uncertainties in Probabilistic Risk Assessments : Philosophical Review of Epistemic Uncertainties in Probabilistic Risk Assessment Models Applied to Nuclear Power Plants - Fukushima Daiichi Accident as a Case Study". Thesis, KTH, Filosofi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-285685.
Pełny tekst źródłaSantiago, Cuéllar Julia. "Structural insights into ABA perception and signalling: structure of ABA receptor PYR1". Doctoral thesis, Universitat Politècnica de València, 2011. http://hdl.handle.net/10251/13260.
Pełny tekst źródłaSantiago Cuéllar, J. (2011). Structural insights into ABA perception and signalling: structure of ABA receptor PYR1 [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/13260
Palancia
Silva, Gustavo Leite da, i Gustavo Leite da Silva. "Validação da assimilação de dados na inferência da refletividade de um radar com sistema MM5". Universidade Federal de Pelotas, 2009. http://repositorio.ufpel.edu.br/handle/ri/2195.
Pełny tekst źródłaOn certain occasions the State of Rio Grande do Sul is affected by atypical weather systems events which are among the category of mesoscale phenomena. The inability of large scale numerical models to appropriately simulate several localized effects, which occurs over the most varied regions, associated to the fast increase of computational resources, it is facilitating and increasingly inducing the use of mesoscale models to improve the knowledge on those anomalous and severe events and even for use as a necessary and indispensable operational tool. The skill of mesoescala model to proceed in providing precipitation forecasts, in space and time scale compatible with to those of a Doppler meteorological radar, it is implemented the whole system of mesoscale modeling that constitutes the MM5. The occurrence of the relatively severe precipitation event, in the area close to the city of Canguçu / RS, on January 11, 2008 was arbitrarily selected to evaluate the model skill - in inferring the reflectivity of the meteorological radar, installed in Canguçu / RS proceeding with conventional data assimilations, PCA (Processing With Assimilation) and PSA (Processing Without Assimilation), as well an approach to the analysis of the thermo-hydrodynamics and synoptic conditions.
Em certas ocasiões o Estado do Rio Grande do Sul é assolado por sistemas meteorológico com manifestações atmosféricas atípicas e que se enquadram entre os fenômenos de mesoescala. A impossibilidade de modelos numéricos de grande escala simularem adequadamente diversos efeitos localizados, que ocorrem nas mais variadas regiões, associada ao rápido aumento dos recursos computacionais, vem facilitando e crescentemente induzindo o emprego de modelos de mesoescala para melhorar os conhecimentos sobre esses eventos anômalos e severos e até mesmo para utilização como uma ferramenta operacional necessária e imprescindível. Para se proceder a destreza de um modelo de mesoescala em prover previsões de precipitação, em escala espacial e temporal compatível com àquelas de um radar meteorológico Doppler, é implantado todo o sistema de modelagem de mesoescala que constitui o MM5. A ocorrência do evento relativamente severo de precipitação, na região próxima da cidade de Canguçu/RS, do dia 11 de janeiro de 2008 foi arbitrariamente selecionada para avaliação do modelo - em inferir a refletividade do radar meteorológico instalado na cidade de Canguçu/RS - com os processamentos PCA (Processamento Com Assimilação) e PSA (Processamento Sem Assimilação) de dados convencionais e abordagem da análise da situação termo-hidrodinâmica e sinótica.
Zanetti, Liliane Scheidegger da Silva [UNESP]. "Avaliação da interface osso/implante após o uso do copolímero de PLA/PGA associado a osso autógeno em coelhos: estudo biomecânico e imunohistoquímico". Universidade Estadual Paulista (UNESP), 2008. http://hdl.handle.net/11449/101058.
Pełny tekst źródłaEste estudo avaliou o uso do c opolímero de ácido poliláctico e poliglicólico (PLA/PGA) associado ao osso autógeno raspado, no reparo ósseo ocorrido ao redor de implantes inseridos em leitos sobrefresados, em tíbias de coelhos. (2) Material e métodos: Foram incluídos no estudo 20 coelhos e inseridos 40 implantes, divididos em dois grupos: Controle (C) e PLA/PGA adicionado a osso autógeno (G). Após fresagem controlada para simular a perda da estabilidade primária, cada implante foi inserido no leito preparado, tendo sido adicionado a sua superfície o copolímero PLA/PGA associado a osso autógeno raspado obtido manualmente. O grupo controle consistiu do implante com o espaço do leito preenchido por coágulo sangüíneo. Os animais foram sacrificados nos períodos de 15, 40 e 60 dias pós-operatórios, e foram realizadas as análises biomecânica e Imunoistoquímica. As tíbias onde estavam inseridos os implantes foram removidas, desc alcificadas, crioprotegidas e obtidos cortes que foram submetidos à reação imunoistoquímica mediante a utilização de anticorpos primários para RANKL, OPG e OC. No período de 60 dias pós-operatórios a analise biomecânica de torque-reverso foi realizada antes da descalcificação. (3) Resultados: Os resultados obtidos demonstraram que o copolímero PLA/PGA misturado ao osso autógeno apresentou-se biocompatível, bioabsorvivel e permitiu a neoformação óssea em contato com o implante, revelada pela análise da expressão das proteínas que regulam o ganho e a perda de massa óssea. E, houve predominância significante de deposição óssea e estabilidade revelada pela análise de torque-reverso (a= 0,05). (4) Conclusões: O copolímero de PLA/PGA pode ser utilizado no preenchimento de defeitos sobrefresados ao redor...
This study evaluated the polylactic and polyglycolic acid copolymer (PLA/PGA) with sc raped bone harvest in the bone repair occurrence of implants placed in large stream beds, in rabbit tibia. (2) Materials and Methods: Twenty rabbits had been enclosed in the study and 40 implants, in two groups: Control (C), PLA/PGA with the autologous bone scraped (G). After controlled drilled to simulate the loss of the primary stability, each implant was placed in the prepared stream bed, having been added to its surface the PLA/PGA copolymer with autologous bone scraped manually (G). The control group consisted of the implant placed in the space filled by blood. The animals had been sacrificed in the periods 15, 40 and 60 postoperative days, where the analyses had been carried through biomechanics and imunohistochemistry. The tibias where the implants were inserted had been removed, decalcified, frozen and getting cuts that had been submitted the imunoistochemistry reaction by means of the use of primary antibodies for RANK L, OPG and OC. In the 60 days period postoperative the against-torque biomechanics was carried through before the decalcified. (3) Results: The gotten results had disclosed that the copolymer PLA/PGA with bone graft showed biocompatibility, bioabsorption and allowed bone growing in contact with the implant, disclosed by expression of the proteins that regulate the profit and mass bone loss. And, had significant predominance of bone deposition and stability disclosed by against-torque ( = 0,05). (4) Conclusions: The PLA/PGA copolymer can be used filling defects drilled around implants in tibia of rabbits, when added bone harvest sc raped, therefore it presents characteristic s like biocompatibility and biodegradation, being totally resorpted and substituted by bone, allowing the bone formation with quality in the interface bone/implant.
Zanetti, Liliane Scheidegger da Silva. "Avaliação da interface osso/implante após o uso do copolímero de PLA/PGA associado a osso autógeno em coelhos : estudo biomecânico e imunohistoquímico /". Araçatuba : [s.n.], 2008. http://hdl.handle.net/11449/101058.
Pełny tekst źródłaBanca: Paulo Sérgio Perri de Carvalho
Banca: Eduardo Hochuli Vieira
Banca: Márcio de Moraes
Banca: André Alberto Camara Puppin
Resumo: (1) Proposiç ão: Este estudo avaliou o uso do c opolímero de ácido poliláctico e poliglicólico (PLA/PGA) associado ao osso autógeno raspado, no reparo ósseo ocorrido ao redor de implantes inseridos em leitos sobrefresados, em tíbias de coelhos. (2) Material e métodos: Foram incluídos no estudo 20 coelhos e inseridos 40 implantes, divididos em dois grupos: Controle (C) e PLA/PGA adicionado a osso autógeno (G). Após fresagem controlada para simular a perda da estabilidade primária, cada implante foi inserido no leito preparado, tendo sido adicionado a sua superfície o copolímero PLA/PGA associado a osso autógeno raspado obtido manualmente. O grupo controle consistiu do implante com o espaço do leito preenchido por coágulo sangüíneo. Os animais foram sacrificados nos períodos de 15, 40 e 60 dias pós-operatórios, e foram realizadas as análises biomecânica e Imunoistoquímica. As tíbias onde estavam inseridos os implantes foram removidas, desc alcificadas, crioprotegidas e obtidos cortes que foram submetidos à reação imunoistoquímica mediante a utilização de anticorpos primários para RANKL, OPG e OC. No período de 60 dias pós-operatórios a analise biomecânica de torque-reverso foi realizada antes da descalcificação. (3) Resultados: Os resultados obtidos demonstraram que o copolímero PLA/PGA misturado ao osso autógeno apresentou-se biocompatível, bioabsorvivel e permitiu a neoformação óssea em contato com o implante, revelada pela análise da expressão das proteínas que regulam o ganho e a perda de massa óssea. E, houve predominância significante de deposição óssea e estabilidade revelada pela análise de torque-reverso (a= 0,05). (4) Conclusões: O copolímero de PLA/PGA pode ser utilizado no preenchimento de defeitos sobrefresados ao redor... (Resumo completo, clicar acesso eletrônico abaixo)
Abstract: (1) Purpose: This study evaluated the polylactic and polyglycolic acid copolymer (PLA/PGA) with sc raped bone harvest in the bone repair occurrence of implants placed in large stream beds, in rabbit tibia. (2) Materials and Methods: Twenty rabbits had been enclosed in the study and 40 implants, in two groups: Control (C), PLA/PGA with the autologous bone scraped (G). After controlled drilled to simulate the loss of the primary stability, each implant was placed in the prepared stream bed, having been added to its surface the PLA/PGA copolymer with autologous bone scraped manually (G). The control group consisted of the implant placed in the space filled by blood. The animals had been sacrificed in the periods 15, 40 and 60 postoperative days, where the analyses had been carried through biomechanics and imunohistochemistry. The tibias where the implants were inserted had been removed, decalcified, frozen and getting cuts that had been submitted the imunoistochemistry reaction by means of the use of primary antibodies for RANK L, OPG and OC. In the 60 days period postoperative the against-torque biomechanics was carried through before the decalcified. (3) Results: The gotten results had disclosed that the copolymer PLA/PGA with bone graft showed biocompatibility, bioabsorption and allowed bone growing in contact with the implant, disclosed by expression of the proteins that regulate the profit and mass bone loss. And, had significant predominance of bone deposition and stability disclosed by against-torque ( = 0,05). (4) Conclusions: The PLA/PGA copolymer can be used filling defects drilled around implants in tibia of rabbits, when added bone harvest sc raped, therefore it presents characteristic s like biocompatibility and biodegradation, being totally resorpted and substituted by bone, allowing the bone formation with quality in the interface bone/implant.
Doutor
BELLETTI, Giada. "Study and development of green water-based methodologies to process biobased and biodegradable polymers for coatings and electronics applications". Doctoral thesis, Università degli studi di Ferrara, 2023. https://hdl.handle.net/11392/2504894.
Pełny tekst źródłaCórdova, Vivanco Wendy, Martinez Jhoana Nathaly Ortega, Sarmiento Joan Payer i Grandi Lui Vásquez. "EASY PAY". Bachelor's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2018. http://hdl.handle.net/10757/625995.
Pełny tekst źródłaExecutive Summary This project tries to explain the design and implementation of an application for mobile devices that works as a reminder of payment commitments. For this purpose, the user will have to feed the application platform only once. The purpose of our application is to prevent users from paying arrears and commissions or to avoid cuts in their different types of services.
Trabajo de investigación
Byrne, Oonagh Marie Therese. "Incorporation of pea weevil resistance from wild pea (Pisum fulvum) into cultivated field pea (Pisum sativum)". University of Western Australia, 2005. http://theses.library.uwa.edu.au/adt-WU2005.0132.
Pełny tekst źródłaTran, Phuong Viet. "The determinants of executive pay components, incentive pay ratio and tournament's pay structure : the UK evidence". Thesis, University of Nottingham, 2011. http://eprints.nottingham.ac.uk/13042/.
Pełny tekst źródłaBolakhrif, Sabah. "Synthesis and application of PLA and PLA/GO fibers through thermo-responsive transformation of PLA particles". Thesis, KTH, Skolan för kemivetenskap (CHE), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-207578.
Pełny tekst źródłaPio, Junior Amaury Oliveira, i 92-98243-5574. "O Trabalho no Amazonas: o periódico Tribuna Popular como instrumento de “orientação das hostes trabalhistas”". Universidade Federal do Amazonas, 2016. https://tede.ufam.edu.br/handle/tede/6269.
Pełny tekst źródłaApproved for entry into archive by Divisão de Documentação/BC Biblioteca Central (ddbc@ufam.edu.br) on 2018-03-27T15:12:44Z (GMT) No. of bitstreams: 2 license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Dissertação_Amaury O. Pio Junior.pdf: 2560693 bytes, checksum: d9d64d08efd20ddb4af66fdf8e8a3a23 (MD5)
Made available in DSpace on 2018-03-27T15:12:44Z (GMT). No. of bitstreams: 2 license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Dissertação_Amaury O. Pio Junior.pdf: 2560693 bytes, checksum: d9d64d08efd20ddb4af66fdf8e8a3a23 (MD5) Previous issue date: 2016-09-15
This thesis aims to analyze the process of Workforce Movement's emergence and elaboration in Amazonas in early 1930s. This period was characterized by the rise of Getulio Vargas as president of the provisional Government. Amazonas, in this context, lived the reordering of its political forces. The fading of the oligarchic system, gave oppotunity to the projection of a new regional political leadership of Vargas' projects. At the same time, we were living important changes in the relationship between governments and unions, indicated by the foundation of the Ministry of Labor, Industry and Commerce in late 1930. Since then, the union movement becomes better observed by some political leaders who, in Amazonas, came to align themselves with this segment, and in some cases, acted as agents of Vargas policy with workers' organizations. In this context, some leaders such as Álvaro Botelho Maia and Luís Tirelli begin to stand out in the local political context. The Partido Socialista Amazonense (PSA) and the Partido Trabalhista Amazonense (PTA) respectively, their performances were extremely important in aggregating the main political forces of that period in Amazonas. Their performances in the elections of 1933, 1934 and 1935 highlighted as political party agents, at first in antagonistic positions, and then, under one party - Partido Popular Amazonense - (PPA) - became allies of the Getulio Vargas' proposals. In this scenario, Tribuna Popular newspaper's foundation, first as the PTA disclosure institution and subsequently linked to the PPA, is revealed as an important information source in that period, and the aforementioned party leaders. Its periodicity between 1933 and 1936, not only allows to build the constitution of the political Amazonas profile, but also alert us to their other function, which was to offer itself as a place for the labor proposals draft their proposals, concerns and discussions about some of the people involved in the workforce and trade union world at that time.
Esta dissertação tem por objetivo analisar o processo de surgimento e gestação do Movimento Trabalhista no Estado do Amazonas, por volta da primeira metade da década de 1930. Esse período seria caracterizado pelos desdobramentos, em todo país, da ascensão de Getúlio Vargas como presidente do então Governo Provisório. O Amazonas, sob tal contexto, assistiria ao reordenamento de suas forças políticas. O enfraquecimento do sistema oligárquico oportunizaria a projeção de novas lideranças políticas regionais que, naquele momento, colocavam-se à disposição dos projetos pretendidos por Vargas. Ao mesmo tempo, vivenciaríamos ali importantes transformações nas relações entre governos e sindicatos, indicadas pela criação do Ministério do Trabalho, Indústria e Comércio em fins de 1930. A partir de então, o movimento sindical passa a ser melhor observado por algumas lideranças políticas que, no caso do Amazonas, alinham-se com esse segmento, chegando, em alguns casos, a atuarem como agentes da política varguista junto às organizações de trabalhadores. Nesse contexto, algumas lideranças como Álvaro Botelho Maia e Luís Tirelli passam a destacar-se no quadro político local. À frente do Partido Socialista Amazonense (PSA) e do Partido Trabalhista Amazonense (PTA), respectivamente, suas atuações foram fundamentais em agregarem em torno de si as principais forças políticas daquele período no Estado. Seus desempenhos nos processos eleitorais de 1933, 1934 e 1935 destacaram-nos enquanto agentes político-partidários, num primeiro momento em posições antagônicas para, logo em seguida, sob uma única legenda – o Partido Popular Amazonense (PPA) - seguirem como aliados em torno das propostas de Getúlio Vargas. Em meio a esse cenário, a fundação do periódico Tribuna Popular, primeiro como órgão de divulgação do PTA e, posteriormente, vinculado ao PPA, revela-se como uma fonte primorosa sob o período e as lideranças partidárias acima mencionadas. Sua periodicidade entre os anos de 1933 e 1936, além de permitir traçar a constituição do perfil político do Amazonas, desperta-nos para sua outra função, que era oferecer-se enquanto espaço para que as propostas Trabalhistas pudessem, ao longo desses anos, esboçarem suas propostas, anseios e discussões sobre parte do mundo operário e sindical da época.
Schwickardi-Jerrentrup, Maren. "Freies PSA und PSA-Quotient in der Diagnostik des Prostatakarzinoms". [S.l.] : [s.n.], 2005. http://archiv.ub.uni-marburg.de/diss/z2005/0091/.
Pełny tekst źródłaHaque, Papia. "Oligomeric PLA coupling agents for phosphate glass fibres/PLA composites". Thesis, University of Nottingham, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.546458.
Pełny tekst źródłaAked, Julia. "The transport of sugars between pea and pea powdery mildew". Thesis, University of Southampton, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303286.
Pełny tekst źródłaFernández, López Maria Angeles. "Regulación de la señalización del ABA mediante mecanismos que controlan vida media y actividad de los receptores PYR/PYL". Doctoral thesis, Universitat Politècnica de València, 2021. http://hdl.handle.net/10251/172364.
Pełny tekst źródła[CA] El creixement de les plantes es pot veure afectat per l'estrès abiòtic, sequera, salinitat o altes temperatures. La transducció de senyals d'estrès abiòtic és fonamental per a generar una resposta fisiològica adequada, que implica la participació de diferents hormones vegetals, sent l'àcid abscísic (ABA) el regulador hormonal crític en la regulació de la resposta de la planta a situacions d'estrès per dèficit hídric. La ruta de senyalització d'ABA i els components principals de la ruta estan ben caracteritzats molecularment i bioquímica. Els receptors "Pyrabactin Resistance 1"(PYR)/"PYR1-LIKE"(PYL)/"Regulatory Component of ABA Receptor" (RCAR) exerceixen un paper important en la regulació quantitativa en resposta a l'estrès tant en llavors com en planta. Encara que la funció bioquímica dels receptors PYR/PYL/RCARs d'ABA, està ben caracteritzada en els últims anys, es coneix poc sobre altres aspectes amb rellevància biològica, com les seues modificacions postraduccionals o la regulació de la seua vida mitjana. Un dels avanços recents en aquest camp ha sigut el descobriment d'una nova família d'E3 ligases anomenades RSL1/RFAs ("RING-finger-ABA-related") que consta d'almenys 10 membres, que són reguladors clau de l'estabilitat dels receptors PYR/PYL/RCAR d'ABA en teixits d'arrels i fulles, regulant la seua degradació en diferents ubicacions cel·lulars. Un estudi més detallat d'aquesta família gènica va revelar que RSL1/RFAs es caracteritzen estructuralment per la presència de tres dominis RING putatius en tàndem, denominats "RING1-IN BETWEEN RING-RING2" (RBR), i en conseqüència pertanyen a la família d'E3 ligases de tipus RBR. Cinc membres de la família RSL1/RFA, RSL1 i RFA6-RFA9, contenen un domini TM en l'extrem C-terminal, la qual cosa suggereix que RFA6-RFA9 també es localitzen en la membrana plasmàtica. No obstant això, altres membres d'aquesta família d'E3 ligases com RFA1-RFA5 manquen del domini TM C-terminal i la seua caracterització funcional, així com la seua ubicació cel·lular, encara no ha sigut investigada. Vam mostrar que l'E3 ligasa RFA1 es localitza tant en el nucli com en el citosol, mentre que RFA4 mostra una localització específica en el nucli promovent la degradació nuclear dels receptors ABA. Per tant, els membres de la família RSL1/RFA interactuen amb els receptors ABA en la membrana plasmàtica, el citosol i el nucli, dirigint-los a la seua degradació a través de la vía endosomal/vacuolar (en el cas de RSL1) o el proteosoma 26S (per a RFA1 i RFA4). Proporcionem informació sobre la funció fisiològica d'aquestes E3 ligases de tipus RBR. Realitzant tant mutagènesis com a assajos bioquímics per a identificar la cisteïna 361 (Cys361) en RFA4 com la Cys del lloc actiu, que és una característica distintiva de les E3 ligases de tipus RBR. Hem demostrat mitjançant una anàlisi d'immuno-transferència del mutant amb pèrdua de funció de rfa1rfa4 que els nivells endògens dels receptors d'ABA PYR1 i PYL4 augmenten en comparació amb les plantes de tipus silvestre. D'altra banda, hem identificat un enzim E2, "Ubiquitin Conjugating Enzyme 26" (UBC26), com l'enzim nuclear canònic E2 que interactua amb l'E3 ligasa RFA4 i forma complexos UBC26-RFA4-Receptor, formant agregats nuclears. També generem al·lels ubc26 amb pèrdua de funció que mostraven una major sensibilitat a ABA i acumulació de receptors ABA en comparació amb el tipus silvestre. En definitiva, hem revelat un sofisticat sistema d'ubiquitinació de receptors ABA en diferents ubicacions subcel·lulars dut a terme a través de la família d'E3 ligases RSL1/RFA de tipus RBR. Hem iniciat proves bioquímiques per a identificar la S-acilació en el domini TM de RSL1. Hem generat RSL1C334S, RSL1 C5S i RSL1C6S mitjançant mutagènesis, així com RSL1ΔTM que presenta una delecció del domini TM. Els estudis inicials han demostrat que els residus de Cys pròxims al domini TM estan S-acilados. Final
[EN] Plant growth is affected by abiotic stress, drought, salinity or high temperature. Signal transduction of abiotic stress is crucial to generate an appropriated physiological response, which involves the participation of different plant hormones, being abscisic acid (ABA) the critical hormonal regulator in regulating the plant's response to situations of stress due to water deficit. The ABA signaling pathway and the major components of the pathway are well characterized molecularly and biochemically. Pyrabactin Resistance 1 (PYR)/PYR1-LIKE (PYL)/Regulatory Component of ABA Receptor (RCAR) ABA receptors play an important role in quantitative regulation of ABA signaling both in seeds and vegetative tissues. Although the biochemical function of the PYR/PYL/RCAR ABA receptors has been well established in recent years, little is known about other aspects with biological relevance, such as their post-translational modifications or the regulation of their half-life. One of the recent advances in this field has been the discovery of a new family of E3 ligases called RSL1/RFAs (RING-finger-ABA-related) that consists of at least 10 members, which are key regulators of the stability of PYR/PYL/RCARs in root and leaf tissues, and regulate the degradation of ABA receptors at different cellular locations. Further inspection of the gene family revealed that RSL1/RFAs are structurally characterized by the presence of three putative RING domains in tandem, named as RING1-IN BETWEEN RING (IBR)-RING2, and accordingly they belong to the RBR-type E3 ligase family. Five members of the RSL1/RFA family, that is, RSL1 and RFA6-RFA9, contain a TM domain at the C-terminal end of the proteins, which suggests that RFA6-RFA9 are also localized in plasma membrane. However, other members of this family of E3 ligases such as RFA1-RFA5 lack the C-terminal TM domain and their functional characterization, as well as their cellular location, has not been investigated yet. In this study we show that the E3 ligase RFA1 is localized both in the nucleus and in the cytosol, while RFA4 shows a specific localization in the nucleus promoting the nuclear degradation of ABA receptors. Therefore, we members of the RSL1/RFA family interact with ABA receptors at the plasma membrane, cytosol and nucleus, targeting them for degradation via the endosomal/vacuolar pathway (in the case of RSL1) or the 26S- proteasome (for RFA1 and RFA4). We provide information on the physiological function of these RBR-type E3 ligases, which are hardly explored in plants. Additionally, we performed mutagenesis and biochemical assays to identify Cys361 in RFA4 as the active site cysteine, which is a distinctive feature of RBR-type E3 ligases. We have shown by immunoblot analysis of the rfa1rfa4 loss-of-function mutant that endogenous levels of ABA receptors PYR1 and PYL4 are increased compared to wild-type plants. On the other hand, we have identified an E2 enzyme, Ubiquitin Conjugating Enzyme 26 (UBC26), as the canonical nuclear enzyme E2 that interacts with the E3 ligase RFA4 and forms UBC26-RFA4-Receptor complexes, forming nuclear aggregates. We also generated loss-of function ubc26 alleles that exhibited higher sensitivity to ABA and accumulation of ABA receptors compared to wild type. We have revealed a sophisticated ubiquitination system of ABA receptors in different subcellular locations carried out through the RBR-type RSL1/RFA family of E3 ligases. We have proceeded with the biochemical and genetic study of the different members of the family. We have started biochemical tests to identify the S-acylation in the TM domain of RSL1. To this end, we have generated RSL1C334S, RSL1 C5S and RSL1C6S by mutagenesis as well as RSL1ΔTM, a deletion of the TM domain. Initial studies have shown that Cys residues close to the TM domain are S-acylated. Finally, we have also generated new combined mutants: rsl1rfa1, rsl1rfa5, rfa1rfa5 and rsl1rfa1rfa5.
Fernández López, MA. (2021). Regulación de la señalización del ABA mediante mecanismos que controlan vida media y actividad de los receptores PYR/PYL [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/172364
TESIS
Kile, Madeleine, i Ida Linnås. "PDA-anpassat webbgränssnitt". Thesis, University West, Department of Informatics and Mathematics, 2003. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-502.
Pełny tekst źródłaEicker, Jannis. "Gender-Pay-Gap". Universitätsbibliothek Leipzig, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-223783.
Pełny tekst źródłaSiegel, Ron. "All-pay contests /". May be available electronically:, 2007. http://proquest.umi.com/login?COPT=REJTPTU1MTUmSU5UPTAmVkVSPTI=&clientId=12498.
Pełny tekst źródłaEriksson, Carl. "Osäkerhetsanalys av PSA-resultat : Metodutveckling och parameterinventeringför osäkerhetsanalys av PSA-resultat". Thesis, Uppsala universitet, Tillämpad kärnfysik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-336256.
Pełny tekst źródłaKhodapanahi, Ehsan. "Study of field pea accessions for development of an oilseed pea". Thesis, McGill University, 2012. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=106611.
Pełny tekst źródłaL'intérêt global dans l'huile végétal est due en partie aux problémes environnementaux et en partie à la hausse de la demande pour des ressources d'énergie renouvables ces dernières décennies. Afin de pouvoir répondre à cette hausse de besoin pour l'huile végétal, il y a eu lieu une hausse globale de la production de l'huile de graines, une hausse qui continue d'augmenter. Dans les régions tempérées chauds du Canada, les protéines et les huiles végétales sont produites surtout par les graines de soja. Dans les régions moins tempérées du Canada, les graines de soja sont remplacées par le canola et les pois. L'objectif de cette recherche a été d'examiner une variété de pois desquelles nous avons extracté les lipides afin de définir une variété destinée à produire une récolte à l'Ouest du Canada. Cette récolte de pois visant à: extraire les protéines et l'huile. La recherche a été initiée par la validation des méthodes d'extraction de lipides, et par la multiplication de 174 accessions de pois en 2009 et 2010 à l'Université de McGill (Québec, Canada). L'extraction de lipides a été effectuée par la méthode validée (la procédure d'extraction par le butanol) présenté au chapitre 2 et a été appliquée aux graines de pois d'accessions qui ont été produites jusqu'à maturité maturité (chapitre 3). La quantité de lipides variait de 0.3% à 6.3% selon l'accession (p<0.0001), l'année (p=0.0002) et l'intéraction d'accession par année (p <0.0001). Pour les autres charactérisques des plantes étudiées dans cette recherche, le type de surface des graines (ridée ou lisse) a eu un effet important (p= 0.001) sur la production totale de lipide dans les graines. Ces données peuvent contribuer à facilité la sélection des pois d'accession: en faveur de ceux qui ont un meilleur potentiel pour la production de d'huile végétale.
Joss, Ann Elizabeth. "The gender pay gap : are equal pay audits an effective solution?" Thesis, City University London, 2005. http://openaccess.city.ac.uk/8437/.
Pełny tekst źródłaConde, Gabriel. "Biocompatibilidade do biopolímero PLA e blenda PLA/PCL em ratos Wistar /". Jaboticabal, 2019. http://hdl.handle.net/11449/181175.
Pełny tekst źródłaResumo: A descoberta de polímeros biodegradáveis influenciou a pesquisa biomédica. O poli (ácido lático) (PLA) e a Poli (Ɛ-caprolactona) (PCL) e suas blendas se tornaram foco de vários estudos por serem biodegradáveis e biorreabsorvíveis, particularmente em pesquisas envolvendo a implantação in vivo. Pelo presente, objetivou-se avaliar se o implante subcutâneo (SC) e intraperitoneal (IP) de PLA ou blenda PLA/ PCL são seguros, biocompatíveis e biodegradáveis em ratos machos Wistar. Os ratos foram distribuídos em cinco grupos avaliados em duas fases; aguda: -1, 1, 2, 7 e 14 dias e crônica: 2, 8 e 24 semanas após a implantação. Assim, estudaram se os grupos PLA (PLA puro), PLA/PCL (mistura PLA/PCL), instrumentado (GI), controle (C) e grupo controle inflamatório (CI). Para avaliar a biocompatibilidade utilizou-se teste comportamental de campo aberto (CA), filamentos de von Frey (FvF) e análises histopatológicas utilizando coloração de hematoxilina-eosina (HE) e picrosirius-hematoxilina (PSH). A biodegradação in vivo e degradação in vitro em solução de PBS a 37°C do PLA e PLA/PCL foram avaliadas por microscopia eletrônica de varredura (MEV). As comparações foram realizadas entre os grupos subdivididos conforme a implantação IP e SC. No teste CA, realizado dois dias após a implantação, o grupo CI demonstrou redução nas frequências de locomoção e levantar e aumento na frequência de grooming em relação aos grupos implantados PLA, PLA/PCL, GI pela via IP ou SC e grupo C. As avaliações de FvF ... (Resumo completo, clicar acesso eletrônico abaixo)
Abstract: The discovery of biodegradable polymers influenced biomedical research. Poly (lactic acid) (PLA) and poly (Ɛ-caprolactone) (PCL) and their blends have become the focus of several studies because they are biodegradable and bioreabsorbable, particularly in research involving implantation in vivo. The aim of this study was to evaluate whether the subcutaneous (SC) and intraperitoneal (IP) implantation of PLA or PLA / PCL blends are safe, biocompatible and biodegradable in male Wistar rats. The rats were distributed in five groups evaluated in two phases; acute: -1, 1, 2, 7 and 14 days and chronic: 2, 8 and 24 weeks after implantation. Thus, we studied whether the groups PLA (pure PLA), PLA / PCL (PLA / PCL mixture), sham (S), control (C) and inflammatory control group (IC). To evaluate the biocompatibility, the open field behavioral test (OF), von Frey filaments (FvF) and histopathological analyzes using hematoxylin-eosin (HE) staining and picrosirius-hematoxylin (PSH) were used. In vivo biodegradation and degradation in vitro in PBS solution at 37°C of PLA and PLA / PCL were evaluated by scanning electron microscopy (SEM). The comparisons were made between groups subdivided according to the IP and SC implementation. In the OF test, performed two days after implantation, the IC group demonstrated a reduction in the locomotion frequencies and augmentation and increase in the grooming frequency in relation to the PLA, PLA / PCL, sham implanted groups via IP or SC and C groups. FvF... (Complete abstract click electronic access below)
Mestre
Hoang, Hieu Duy. "Evaluation of Pea Protein and Modified Pea Protein as Egg Replacers". Diss., North Dakota State University, 2012. https://hdl.handle.net/10365/26825.
Pełny tekst źródłaAlhassun, Abdulrahman. "Australia's Say-on-Pay Rule: Pay-Performance Link and Auditors' Response". Thesis, Griffith University, 2021. http://hdl.handle.net/10072/406051.
Pełny tekst źródłaThesis (PhD Doctorate)
Doctor of Philosophy (PhD)
Dept Account,Finance & Econ
Griffith Business School
Full Text
Bomfim, Bianca Bravim [UNESP]. "Regeneração óssea guiada com o uso de membrana de copolímero PLA/PGA em levantamento da membrana do seio maxilar: estudo experimental com análises histomorfométrica e imunoistoquímica". Universidade Estadual Paulista (UNESP), 2015. http://hdl.handle.net/11449/133943.
Pełny tekst źródłaApproved for entry into archive by Juliano Benedito Ferreira (julianoferreira@reitoria.unesp.br) on 2016-01-29T15:08:29Z (GMT) No. of bitstreams: 1 bomfim_bb_dr_araca.pdf: 75671195 bytes, checksum: 7dea3472294f07732ed6f7e28c426429 (MD5)
Made available in DSpace on 2016-01-29T15:08:29Z (GMT). No. of bitstreams: 1 bomfim_bb_dr_araca.pdf: 75671195 bytes, checksum: 7dea3472294f07732ed6f7e28c426429 (MD5) Previous issue date: 2015-12-17
A utilização de biomateriais em implantodontia, principalmente em casos em que o leito receptor do implante apresenta quantidade e qualidade ósseas inadequadas, se torna importante. Diversos estudos mostram a possibilidade do usar copolímeros de PLA/PGA, no entanto, estes mesmos estudos mostram que a proporção de PLA e PGA irá influenciar a taxa de degradação do copolímero. Portanto, objetivo desse estudo foi avaliar o comportamento biológico do copolímero de PLA/PGA como substitutos ósseos para técnica de levantamento da membrana do seio maxilar por meio de análises histomorfométrica e imunoistoquímica. Vinte coelhos machos, branco, da raça Nova Zelândia, cada um pesando cerca de 3,0 kg, foram utilizados e foram divididos em dois grupos de acordo com o material de preenchimento do seio: grupo coágulo (GC) e grupo copolímero (GP). Foi realizado descolamento bilateral da membrana sinusal com períodos de eutanásia aso 3, 10, 20 e 40 dias para as análises histomorfométricas e imunoistoquímica para a expressão de osteocalcina (OC). De uma forma geral, para todas as variáveis avaliadas, a diferença estatisticamente significante mostrou-se entre 3 e 10 dias pós-operatórios (p<0,05), como pode ser demostrado também na expressão de OC. Foi possível concluir que o copolímero PLA/PGA mostrou-se capaz de conduzir o processo de formação óssea, mantendo o volume inicial, impedindo o colabamento da membrana com a parede do seio, como pode ser observado em GC.
The use of biomaterials in dental implantology, especially in cases where the receptor region of implant has inadequate bone quantity and quality, becomes important. Several studies have shown the possibility to use copolymers of PLA / PGA, however these same studies show that the proportion of PLA and PGA copolymer will influence the degradation rate. So the aim of this study was to evaluate the biological behavior of PLA / PGA copolymer as bone substitutes for lifting technique of the maxillary sinus membrane through histomorphometric and immunohistochemical analyzes. Twenty male rabbits, white, New Zealand race, each weighing about 3.0 kg, were used and were divided into two groups in accordance with within the filling material: Clot group (CG) and a copolymer group (PG) . Were realized the bilateral sinus lift of rabbits and inserted the respective materials with euthanasia periods as 3, 10, 20 and 40 days for histomorphometric and immunohistochemical analysis for the expression of osteocalcin (OC). In general, for all variables, a statistically significant difference was shown between 3 and 10 days postoperatively (p <0.05), as can be demonstrated also in OC expression. It was concluded that the PLA / PGA copolymer was shown to be able to conduct the process of bone formation, maintaining the initial volume, preventing the collapse of the membrane with the sinus wall, as can be observed in GC.
Bomfim, Bianca Bravim. "Regeneração óssea guiada com o uso de membrana de copolímero PLA/PGA em levantamento da membrana do seio maxilar : estudo experimental com análises histomorfométrica e imunoistoquímica /". Araçatuba, 2015. http://hdl.handle.net/11449/133943.
Pełny tekst źródłaBanca: Wilson Roberto Poi
Banca: Roberta Okamoto
Banca: Martha Alayde Alcantara Salim
Banca: Sergio Luiz Melo Gonçalves
Resumo: A utilização de biomateriais em implantodontia, principalmente em casos em que o leito receptor do implante apresenta quantidade e qualidade ósseas inadequadas, se torna importante. Diversos estudos mostram a possibilidade do usar copolímeros de PLA/PGA, no entanto, estes mesmos estudos mostram que a proporção de PLA e PGA irá influenciar a taxa de degradação do copolímero. Portanto, objetivo desse estudo foi avaliar o comportamento biológico do copolímero de PLA/PGA como substitutos ósseos para técnica de levantamento da membrana do seio maxilar por meio de análises histomorfométrica e imunoistoquímica. Vinte coelhos machos, branco, da raça Nova Zelândia, cada um pesando cerca de 3,0 kg, foram utilizados e foram divididos em dois grupos de acordo com o material de preenchimento do seio: grupo coágulo (GC) e grupo copolímero (GP). Foi realizado descolamento bilateral da membrana sinusal com períodos de eutanásia aso 3, 10, 20 e 40 dias para as análises histomorfométricas e imunoistoquímica para a expressão de osteocalcina (OC). De uma forma geral, para todas as variáveis avaliadas, a diferença estatisticamente significante mostrou-se entre 3 e 10 dias pós-operatórios (p<0,05), como pode ser demostrado também na expressão de OC. Foi possível concluir que o copolímero PLA/PGA mostrou-se capaz de conduzir o processo de formação óssea, mantendo o volume inicial, impedindo o colabamento da membrana com a parede do seio, como pode ser observado em GC
Abstract: The use of biomaterials in dental implantology, especially in cases where the receptor region of implant has inadequate bone quantity and quality, becomes important. Several studies have shown the possibility to use copolymers of PLA / PGA, however these same studies show that the proportion of PLA and PGA copolymer will influence the degradation rate. So the aim of this study was to evaluate the biological behavior of PLA / PGA copolymer as bone substitutes for lifting technique of the maxillary sinus membrane through histomorphometric and immunohistochemical analyzes. Twenty male rabbits, white, New Zealand race, each weighing about 3.0 kg, were used and were divided into two groups in accordance with within the filling material: Clot group (CG) and a copolymer group (PG) . Were realized the bilateral sinus lift of rabbits and inserted the respective materials with euthanasia periods as 3, 10, 20 and 40 days for histomorphometric and immunohistochemical analysis for the expression of osteocalcin (OC). In general, for all variables, a statistically significant difference was shown between 3 and 10 days postoperatively (p <0.05), as can be demonstrated also in OC expression. It was concluded that the PLA / PGA copolymer was shown to be able to conduct the process of bone formation, maintaining the initial volume, preventing the collapse of the membrane with the sinus wall, as can be observed in GC
Doutor
Gross, Idejan Padilha. "Estudo de variáveis que modificam a cinética de cristalização do PLA em blendas PLA/PVAL e PLA-g-MA/PVAL". reponame:Repositório Institucional da UFSC, 2015. https://repositorio.ufsc.br/xmlui/handle/123456789/135281.
Pełny tekst źródłaMade available in DSpace on 2015-09-29T04:09:08Z (GMT). No. of bitstreams: 1 334700.pdf: 1192728 bytes, checksum: fd838a7720b0408ea4a86d5d819eb827 (MD5) Previous issue date: 2015
A busca por materiais biodegradáveis tem sido intensificada nos últimos anos com o objetivo de reduzir impactos ambientais. O poli(vinil álcool) (PVAL) e o poli(ácido lático) (PLA) são polímeros biodegradáveis amplamente produzidos. Uma alternativa para a obtenção de um material com propriedades diferentes dos polímeros puros é a preparação de blendas poliméricas. O presente trabalho avaliou o efeito do enxerto de anidrido maleico (MA) na cadeia polimérica do PLA na morfologia de blendas PLA-g-MA/PVAL, em comparação às blendas PLA/PVAL, bem como a influência do processamento, do enxerto e da presença de PVAL na cinética de cristalização isotérmica do PLA. A reação de enxerto foi realizada em reômetro de torque e o produto caracterizado por espectroscopia de UV-Vis, sendo ácido maleico o grupo funcional enxertado. As blendas PLA/PVAL e PLA-g-MA/PVAL foram preparadas por extrusão, em diferentes composições. Uma análise morfológica comparativa dos sistemas PLA/PVAL e PLA-g-MA/PVAL mostrou uma mudança na forma dos domínios de PVAL, de domínios esféricos para domínios fibrilares de dispersão regular nas blendas com componente enxertado, sugerindo uma estabilização da interface entre os dois polímeros. Efeitos significativos do processamento na cinética de cristalização, com base nos parâmetros cinéticos de Avrami, foram associados à diminuição do emaranhamento das cadeias, devido ao cisalhamento dos materiais no processamento. Os resultados mostraram que o PVAL pode atuar como agente de nucleação e que a taxa de cristalização aumentou com a área superficial dos domínios. Em quantidades elevadas, o PVAL atuou inibindo o efeito causado pelo processamento. O enxerto também apresentou influência no mecanismo de nucleação, bem como na forma dos cristais, que passaram da forma esferulítica (PLA) para hexagonal (PLA-g-MA).
Abstract : The search for biodegradable materials has been intensified in recent years in order to reduce environmental impacts. Poly(vinyl alcohol) (PVAL) and poly(lactic acid) (PLA) are widely produced biodegradable polymers. An alternative to materials with intermediate properties in relation to neat polymers is the formulation of polymer blends. The present study evaluated the effect of maleic anhydride (MA) graft on the PLA polymeric chain in the morphology of PLA-g-MA/PVAL blends compared to PLA/PVAL blends, as well as the effect of processing, graft, and the presence of PVAL in the isothermal crystallization kinetics of PLA. The graft reaction was performed in a torque rheometer, the product was characterized by UV-Vis spectroscopy, and the maleic acid was the grafted functional group. Blends of PLA/PVAL and PLA-g-MA/PVAL were prepared through extrusion of the materials at different compositions. A comparative morphological analysis of the systems PLA/PVAL and PLA-g-MA/PVAL shows that there was a change in the form of PVAL domains, from spherical to fibrilar domains of regular dispersion in blends with a grafted component, suggesting some interface stabilization between the polymers. Significant processing effects in the crystallization kinetics, based on the Avrami kinetic parameters, were associated to a reduction of chain entanglement due to a high shearing of the materials in the processing. The results shows that the PVAL can act as a nucleating agent, and the crystallization rate increases with the surface area of the PVAL domains. PVAL acted by inhibiting the processing effect in blends of high PVAL proportion. The graft also showed an influence on the nucleation mechanism, as the PLA-g-MA presented a hexagonal spherulitic shape (PLA).
Scutt, Jocelynne A. History & Philosophy Faculty of Arts & Social Sciences UNSW. "Wage rage: the struggle for equal pay and pay equity in Australia". Awarded by:University of New South Wales. History & Philosophy, 2007. http://handle.unsw.edu.au/1959.4/40563.
Pełny tekst źródłaThornley, Carole. "Pay determination for nurses : pay review, grading and training in the 1980s". Thesis, University of Warwick, 1993. http://wrap.warwick.ac.uk/36141/.
Pełny tekst źródłaTrevor, Jonathan Paul. "Can pay be strategic? : a critical exploration of strategic pay in practice". Thesis, University of Cambridge, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.613360.
Pełny tekst źródłaAckerman, Van. "An actor's excursion through We Won't Pay! We Won't Pay!! destination: Luigi". The Ohio State University, 1985. http://rave.ohiolink.edu/etdc/view?acc_num=osu1371124905.
Pełny tekst źródłaNylander, Karl, i Wallin Erik Trulsson. "Skiftet Mot PWA Inom Applikationsutveckling : En analys av PWA vs. native applikation". Thesis, Malmö universitet, Institutionen för datavetenskap och medieteknik (DVMT), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-43169.
Pełny tekst źródłaKosgi, S. "Conformationally restricted PNA analogues synthesis and biophysical studies of cationic pyrrolidyl PNA". Thesis(Ph.D.), CSIR-National Chemical Laboratory, Pune, 2012. http://dspace.ncl.res.in:8080/xmlui/handle/20.500.12252/2150.
Pełny tekst źródłaNovi, Alberto. "Analisi del ciclo di vita della produzione di poliidrossialcanoati da biomasse residuali dell’industria vitivinicola". Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018. http://amslaurea.unibo.it/15777/.
Pełny tekst źródłaRocha, Brismark G?es da. "Desenvolvimento de bionanocomp?sitos: nano e microcristais de celulose com poli (?lcool vin?lico) e poli (?cido l?tico)". Universidade Federal do Rio Grande do Norte, 2014. http://repositorio.ufrn.br/handle/123456789/19396.
Pełny tekst źródłaApproved for entry into archive by Elisangela Moura (lilaalves@gmail.com) on 2015-11-30T21:25:07Z (GMT) No. of bitstreams: 1 BrismarkGoesDaRocha_TESE.pdf: 14655007 bytes, checksum: f132218e797f47b22250ea1afea1399e (MD5)
Made available in DSpace on 2015-11-30T21:25:07Z (GMT). No. of bitstreams: 1 BrismarkGoesDaRocha_TESE.pdf: 14655007 bytes, checksum: f132218e797f47b22250ea1afea1399e (MD5) Previous issue date: 2014-07-30
O presente trabalho tem como objetivos extrair a fibra da folha do abacaxizeiro tipo P?rola para obter bast?es (?whiskers) de celulose destas fibras tratadas quimicamente, para utiliza??o como refor?o na fabrica??o de filmes de Biocomp?sito com Poli ?lcool Vin?lico (PVA) e Poli (?cido l?tico) (PLA) como matrizes. As amostras foram caracterizadas utilizando an?lises como TGA, FTIR e DSC. Tamb?m foram realizados ensaios das folhas para a identifica??o de macro e micro nutrientes. As amostras dos filmes de biocomp?sitos foram usadas para ensaios mec?nicos de tra??o nos filmes e o teste de biodegrada??o aer?bica, bem como nos filmes de 100% de PVA e PLA. A extra??o da fibra foi efetuada numa desfibradeira autom?tica, e em seguida as fibras extra?das foram lavadas v?rias vezes para remover as impurezas e foram tratadas com NaOH (hidr?xido de s?dio) e NaClO (hipoclorito de s?dio), para remover as impurezas inerentes ?s fibras e a cor natural, respectivamente. Em seguida, as fibras tratadas foram submetidas a um processo de hidr?lise com ?cido sulf?rico a 13,5%, para obten??o de bast?es de celulose. Foram produzidos filmes biocomp?sitos de PVA e PLA com bast?es de celulose nas concentra??es de 0%, 1%, 3%, 6%, 9% e 12%. ?gua destilada a 80?C ? 5 na dilui??o de PVA e diclorometano para a dilui??o do PLA na temperatura ambiente. Na prepara??o dos filmes foi utilizado o m?todo de ?casting?. Posteriormente foram realizados os testes de absor??o de ?gua pelos filmes produzidos. Para o ensaio mec?nico de tra??o dos filmes foi utilizada a norma ASTM D638-10 com velocidade de 50 mm/min. O teste estat?stico Qui-quadrado foi empregado para a verifica??o da exist?ncia de diferen?as significativas em n?vel de 0,05: comprimentos das folhas do abacaxizeiro e dos bast?es, procedimentos utilizados para filtra??o em filtro utilizando seringa de 0,2 ?m e filtragem atrav?s de centrifuga??o. Foi realizado estudo de hidrofilidade dos filmes com base no ?ngulo de contato. Tamb?m foi aplicado o teste Estat?stico T-Student com n?vel de signific?ncia (0,05) para comparar as espessuras dos filmes de PVA e PLA e das propriedades mec?nicas (tra??o). Na avalia??o da biodegradabilidade dos biocomp?sitos, bem como os filmes de 100% das matrizes de PVA e PLA, foi utilizado o teste de Sturm norma D5209. Os resultados indicam a presen?a de bast?es de celulose com comprimentos variandos de 7,33 nm a 186,17 nm. As espessuras em m?dia dos filmes de PVA e PLA eram de 0,153 ?m e 0,210 ?m, respectivamente. Foi observada uma forte correla??o linear diretamente proporcional entre a tra??o dos filmes de PVA e a concentra??o de bast?es de celulose nos filmes (0,7336), da espessura do filme de 0,1404. Juntos, a porcentagem de bast?es de celulose e a espessura dos filmes, correlacionaram 0,8740. No caso dos filmes de PLA, a correla??o entre o teor dos bast?es de celulose e a tra??o foi fraca, inversamente proporcional (-0,0057) e a espessura em -0,2602, totalizando -0,2659, isto ?, os bast?es de celulose n?o aderiram totalmente ao PLA. Na compara??o dos resultados da tra??o das duas matrizes polim?ricas, os bast?es de celulose contribu?ram na melhoria das propriedades mec?nicas no caso de PVA, mas h? uma diferen?a com rela??o a PLA. Nos testes de biodegradabilidade, foi observado a degrada??o total do filme de PVA ap?s 27 dias, enquanto o filme de PLA degradou em 20 dias, o que comprova que os filmes produzidos s?o biodegrad?veis.
This work has the main objective to obtain nano and microcrystals of cellulose, extracted from the pineapple leaf fibres (PALF), as reinforcement for the manufacture of biocomposite films with polymeric matrices of Poly(vinyl alcohol) (PVA) and Poly(lactic acid) (PLA). The polymer matrices and the nano and microcrystals of cellulose were characterised by means of TGA, FTIR and DSC. The analysis was performed on the pineapple leaves to identify the macro and micronutrients. The fibers of the leaves of the pineapple were extracted in a desfibradeira mechanical. The PALF extracted were washed to remove washable impurities and subsequently treated with sodium hydroxide (NaOH) and sodium hypochlorite (NaClO) in the removal of impurities, such as fat, grease, pectates, pectin and lignin. The processed PALF fibers were hydrolysed in sulfuric acid (H2SO4) at a concentration of 13.5 %, to obtain nano and microcrystals of cellulose. In the manufacture of biocomposite films, concentrations of cellulose, 0 %, 1 %, 3 %, 6 %, 9% and 12% were used as reinforcement to the matrices of PVA and PLA. The PVA was dissolved in distilled water at 80 ? 5 oC and the PLA was dissolved in dichloromethane at room temperature. The manufacture of biocomp?sitos in the form of films was carried out by "casting". Tests were carried out to study the water absorption by the films and mechanical test of resistance to traction according to ASTM D638-10 with a velocity of 50 mm/min.. Chi-square statistical test was used to check for the existence of significant differences in the level of 0.05: the lengths of the PALF, lengths of the nano and microcrystals of cellulose and the procedures used for the filtration using filter syringe of 0.2 ?m or filtration and centrifugation. The hydrophilicity of biocomp?sitos was analysed by measuring the contact angle and the thickness of biocomp?sitos were compared as well as the results of tests of traction. Statistical T test - Student was also applied with the significance level (0.05). In biodegradation, Sturm test of standard D5209 was used. Nano and microcrystals of cellulose with lengths ranging from 7.33 nm to 186.17 nm were found. The PVA films showed average thicknesses of 0.153 ?m and PLA 0.210 ?m. There is a strong linear correlation directly proportional between the traction of the films of PVA and the concentration of cellulose in the films (composite) (0,7336), while the thickness of the film was correlated in 0.1404. Nano and microcrystals of cellulose and thickness together, correlated to 0.8740. While the correlation between the cellulose content and tensile strength was weak and inversely proportional (- 0,0057) and thickness in -0.2602, totaling -0,2659 in PLA films. This can be attributed to the nano and microcrystals of cellulose not fully adsorbed to the PLA matrix. In the comparison of the results of the traction of the two polymer matrices, the nano and microcrystals have helped in reducing the traction of the films (composite) of PLA. There was still the degradation of the film of PVA, within a period of 20 days, which was not seen in the PLA film, on the other hand, the observations made in the literature, the average time to start the degradation is above 60 days. What can be said that the films are biodegradable composites, with hydrophilicity and the nano and microcrystals of cellulose, contribute positively in the improvement of the results of polymer matrices used.
Ravelli, Thandara Garcia. "Seleção de genes codificadores de PHA sintases para a construção de recombinantes em Burkholderia sacchari e Pseudomonas sp e avaliação da produção de polihidroxialcanoatos com diferentes composições monoméricas". Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/42/42132/tde-11062015-103546/.
Pełny tekst źródłaPolyhydroxyalkanoates (PHA) are polyesters accumulated from renewable sources by several bacteria and are thermoplastic, biodegradable and biocompatible. The variability of the PHA monomer composition determines its mechanical properties and allows their use in many applications. PHA synthase is the enzyme responsible for the polymerization of PHA. The objective was to search for genes encoding this enzyme, construction and the assessment of recombinant bacteria carrying such genes. Initially a screening of PHA synthase genes was made from a metagenomic library clones previously identified as positive by PCR for any type of PHA synthase. Later a search for class III PHA synthases was made as a construction of a recombinant Pseudomonas sp and B. sacchari by introducing genes of C. vinosum (phaECCv). In the two recombinant strains, the genes inserted were able to increase the fraction of 3HHx compared to the wild strain when glucose and hexanoate was used as carbon sources.
Gurgen, Emre. "Pea Protein Isolate Production". Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/3/12606434/index.pdf.
Pełny tekst źródła#61617
0.1, 13.0&
#61617
0.1, 14.0&
#61617
0.1 and 15.0&
#61617
0.3%. The seeds with different moisture contents were then milled and fractioned according to the particle size of 53, 106, 212, 425 and 850 &
#956
m. Tempering the pea seeds (12.0&
#61617
0.1, 13.0&
#61617
0.1, 14.0&
#61617
0.1 and 15.0&
#61617
0.3%) did not significantly affect the mass and protein fraction in comparison with the pea seeds that are not tempered (11.45&
#61617
0.05%). For the production of pea protein isolate, aqueous-solvent extraction method was used. The protein was extracted with an alkali solution from the ground pea-seeds and precipitated from the extract by bringing the pH down to isoelectric point (pH=4.5). The precipitated protein was separated from the supernatant by centrifugation. The effects of extraction parameters on the yield of extraction such as pH, particle size, temperature, solvent to solid ratio, and salt were studied. The maximum yields were obtained at these conditions
pH: 12.0 for the alkalinity of the extraction medium, 53 &
#956
m for the particle size, 40&
#61616
C for the extraction temperature, 5.0 for the solvent to solid ratio and 0.0 M for the saline concentration. At these extraction conditions, the maximum protein recovery was 72.75% resulting in a product containing 93.29% protein on a dry basis.